ICS CUTTING TOOLS, INC 511 Main Street Casco, WI USA (920) Fax (920)

CUTTING TOOLS, INC 511 Main Street Casco, WI 54205-0125 USA (920) 837-2526 Fax (920) 837-2530 www.icscuttingtools.com info@icscuttingtools.com

SAWING TOOLS INDEX ABRASIVE CUT-OFF WHEELS...15 MASONRY CUTTING...15 METAL CUTTING...15 AIR SAW BLADES - 1/2" SHANK...2 METAL CUTTING - BI-METAL...2 METAL SCROLL CUTTING - BI-METAL...2 CIRCULAR SAW BLADES...15 DIAMOND SAW BLADES - DRY CUTTING ASPHALT & GREEN CONCRETE BLADE...13 BLOCK BLADE...13 BRICK & BLOCK BLADE...13 CONTINUOUS RIM TILE BLADE...14 CURED CONCRETE BLADE...13 SEGMENTED TURBO BLADE...14 SMALL DIAMETER LASER WELDED BLADE...14 SMALL DIAMETER SEGMENTED BLADE...14 TUCK POINTING BLADE...13 TURBO BLADE...14 DIAMOND SAW BLADES - WET CUTTING ASPHALT & GREEN CONCRETE BLADE...12 ASPHALT OVER CONCRETE BLADE...12 CURED CONCRETE BLADE...12 HACKSAW FRAMES CLOSE QUARTER FRAME...10 HIGH TENSION FRAME...10 JUNIOR (MINI) FRAME...10 HAND HACKSAW BLADES BI-METAL (8% COBALT)...9 CARBIDE GRIT EDGED...9 HIGH SPEED STEEL...9 HANDSAWS COMPASS SAWS...8 CROSSCUT SAWS - plastic handle...8 CROSSCUT SAWS - wood handle...8 DRYWALL SAWS...8 DRYWALL/WALLBOARD SAWS...8 PVC SAWS...8 Replacement Blade...8 TOOL BOX SAW...8 HOLE SAW ARBOR ADAPTER...20 HOLE SAW ARBORS...20 HOLE SAW DRIVING PLATES...21 HOLE SAW EXTENSIONS...21 HOLE SAW KITS BI-METAL FRACTIONAL...16 BI-METAL FRACTIONAL built in arbor...18 BI-METAL METRIC...17 BI-METAL METRIC built in arbor...19 CARBIDE GRIT EDGED...24 CARBIDE TIPPED...22 HOLE SAW MANDREL (ARBOR) ADAPTER...21 HOLE SAW PILOT DRILLS CARBIDE TIPPED...21 HIGH SPEED STEEL...21 HOLE SAWS BI-METAL FRACTIONAL...16 HOLE SAWS BI-METAL FRACTIONAL built in arbor...18 BI-METAL METRIC...17 BI-METAL METRIC built in arbor...19 CARBIDE GRIT EDGED...24 CARBIDE TIPPED...22 HOLE SAWS - D DRIVE...25 D DRIVE ARBOR/PILOT DRILLS...25 HOLE SAWS - RECESSED LIGHTING...25 PORTABLE BAND SAW BLADES BI-METAL...11 HARD BACK...11 POWER HACK SAW BLADES...11 RECIPROCATING SAW BLADES - 1/2" SHANK ABRASIVE MATERIALS CUTTING - CARBIDE GRIT EDGE...6 METAL CUTTING - COBALT BI-METAL...6 METAL CUTTING - HIGH SPEED STEEL...5 METAL SCROLL CUTTING - BI-METAL...6 METAL SCROLL CUTTING - HIGH SPEED STEEL...5 NAIL-EMBEDDED WOOD CUTTING - BI-METAL...6 NAIL-EMBEDDED WOOD CUTTING - HIGH ALLOY STEEL...5 NAIL-FREE WOOD CUTTING - HIGH CARBON...5 PLASTER CUTTING - HIGH ALLOY STEEL...5 WOOD SCROLL [CONTOUR] CUTTING - BI-METAL...6 WOOD SCROLL [CONTOUR] CUTTING - HIGH CUTTING...5 ROD SAWS...7 SABER/JIG SAW BLADES - 1/4" SHANK ABRASIVE MATERIALS CUTTING - CARBIDE GRIT EDGE...2 ALUMINUM &NON-FERROUS METAL CUTTING - HSS...1 FIBERGLASS CUTTING - HIGH SPEED STEEL...1 METAL CUTTING - BI-METAL...2 METAL CUTTING - HIGH SPEED STEEL...1 PLASTER CUTTING - HIGH CARBON...1 WOOD CUTTING - BI-METAL...2 WOOD CUTTING - HIGH CARBON...1 WOOD SCROLL CUTTING - HIGH CARBON...1 SABER/JIG SAW BLADES - BAYONET SHANK METAL CUTTING - BI-METAL...3 METAL SCROLL CUTTING - BI-METAL...3 WOOD CUTTING - BI-METAL...3 SABER/JIG SAW BLADES - BOSCH STYLE SHANK ABRASIVE MATERIALS CUTTING - CARBIDE GRIT EDGE...4 FIBERGLASS CUTTING - COBALT BI-METAL...4 METAL CUTTING COBALT BI-METAL...4 METAL CUTTING HIGH SPEED STEEL...4 NAIL EMBEDDED WOOD CUTTING - COBALT BI-METAL...4 NAIL EMBEDDED WOOD CUTTING - HIGH SPEED STEEL...4 WOOD CUTTING - HIGH CARBON...4 WOOD SCROLL CUTTING - COBALT BI-METAL...4 WOOD SCROLL CUTTING - HIGH CARBON...4 SABER/JIG SAW BLADES - MAKITA SHANK ABRASIVE MATERIALS CUTTING - CARBIDE GRIT EDGE...3 METAL CUTTING - HIGH SPEED STEEL...3 NAIL EMBEDDED WOOD CUTTING - HIGH SPEED STEEL...3 WOOD CUTTING - HIGH CARBON...3 SCROLL/JIGSAW BLADES...7

WIS MILLED SABER/JIG SAW BLADES - 1/4" SHANK Fits all Saber Saws using universal 1/4" shank. ILLUSTRATION AND COLOR RED BLADE SILVER GROUND FINISH LENGTH WIDTH PER INCH CUT - SPEED APPLICATION TYPE EACH POUCH 5 PCS. BOX 100 PCS. METAL CUTTING - HIGH SPEED STEEL 2-3/4 5/16 14 Medium - Fast Wavy SSB-M-314 $.90 $.82 Metals 1/4" - 3/8" 2-3/4 5/16 18 Smooth - Medium Wavy SSB-M-318.90.82 Metals 1/8" - 1/4" 2-3/4 5/16 24 Fine - Slow Wavy SSB-M-324.90.82 Metals 1/16" - 3/16" 2-3/4 5/16 32 Extra Fine - Slow Wavy SSB-M-332.90.82 WOOD CUTTING - HIGH CARBON 2-3/4 5/16 6 Coarse - Fast Wavy SSB-W-306.48.44 Wood up to 1-1/2" 3-1/8 5/16 8 Medium - Medium Alt. SSB-W-308.48.44 Wood up to 2" 3-1/8 5/16 10 Smooth - Medium Alt. SSB-W-310.48.44 Wood up to 2" 4 5/16 6 Smooth - Fast Taper SSB-TG-406 1.52 1.34 Wood up to 2-3/8" Ground 4 5/16 10 Fine - Medium Taper SSB-TG-410 1.52 1.34 Wood up to 2-3/8" 6 9/16 6 Rough - Fast Alt. SSB-W-606 1.92 1.72 Wood up to 4" ST-1 BLUE BLADE BLUE BLADE RED BLADE 3-5/8 1-3/8 8 Medium - Medium Alt. SSB-WF-308 1.92 1.72 Flush cuts to wall 3-1/8 1/4 10 Medium - Medium Alt. SSB-TE-310 1.18 1.06 Cuts wood both directions WOOD SCROLL CUTTING - HIGH CARBON 2-3/4 5/32 12 Smooth - Medium Wavy SSB-S-312.80.72 Scroll cuts wood to 1" FIBERGLASS CUTTING - HIGH SPEED STEEL 2-3/4 5/16 14 Fine - Very Fast Wavy SSB-F-314 1.24 1.12 Special Angle cuts 30% faster ALUMINUM & NON-FERROUS METAL CUTTING - HIGH SPEED STEEL 3-1/8 5/16 8 Medium - Fast Skip SSB-A-308 1.76 1.58 Special teeth eject chips Tooth PLASTER CUTTING - HIGH CARBON 3-5/8 5/16 9 Rough - Fast V- SSB-P-309 1.08.96 V-Tooth prevents clogging Tooth

SABER/JIG SAW BLADES - 1/4" SHANK Fits all Saber Saws using universal 1/4" shank. USA ILLUSTRATION AND COLOR LENGTH WIDTH PER INCH BI-METAL CUT - SPEED APPLICATION TYPE MILLED EACH POUCH 5 PCS. BOX 100 PCS. METAL CUTTING - BI-METAL 3-5/8 5/16 14 Medium - Fast Wavy SSB-BM-314 $1.94 $1.76 Metals 1/4" - 3/8" 2-3/4 5/16 18 Smooth - Medium Wavy SSB-BM-318 1.72 1.56 Metals 1/8" - 1/4" 2-3/4 5/16 24 Fine - Slow Wavy SSB-BM-324 1.72 1.56 Metals 1/16" - 3/16" WOOD CUTTING - BI-METAL 4-1/8 1/4 6 Coarse - Fast Alt. SSB-BW-406 2.12 1.92 Wood up to 2-3/8" 4-1/8 1/4 10 Smooth - Medium Alt. SSB-BW-410 2.12 1.92 Wood up to 2-3/8" ST-2 SABER/JIG SAW BLADES - 1/4" SHANK USA Fits all Saber Saws using universal 1/4" shank. ILLUSTRATION AND COLOR LENGTH WIDTH - CARBIDE GRIT EDGE GRIT LEVEL GRIT STYLE CUT - SPEED APPLICATION CARBIDE GRIT EDGE EACH POUCH BOX 5 PCS. 100 PCS. ABRASIVE MATERIALS CUTTING - CARBIDE GRIT EDGE 2-7/8 3/8 30 Grit Coarse Plywood, cast iron, SSB-CE-2C $3.36 $3.02 2-7/8 3/8 40 Grit Medium stainless steel, fiberglass, SSB-CE-2M 3.36 3.02 ceramic tile, slate, brick, 2-7/8 3/8 50 Grit Fine SSB-CE-2F 3.36 3.02 marble, etc. Cuts many 3-5/8 3/8 30 Grit Coarse materials conventional SSB-CE-3C 3.36 3.02 3-5/8 3/8 40 Grit Medium steel blades cannot cut. SSB-CE-3M 3.36 3.02 AIR SAW BLADES - 1/2" SHANK USA BI-METAL MILLED Fits Florida Pneumatic, Snap On, Mag Tools and most popular pneumatic reciprocating saws. ILLUSTRATION AND COLOR LENGTH WIDTH PER INCH CUT - SPEED APPLICATION TYPE EACH POUCH BOX 5 PCS. 100 PCS. METAL SCROLL CUTTING - BI-METAL 3-1/2 1/2 18 Smooth - Medium Wavy ASB-BM-318 $2.30 $2.08 Metals 1/8" - 1/4" 3-1/2 1/2 24 Fine - Slow Wavy ASB-BM-324 2.30 2.08 Metals 1/16" - 3/16" 3-1/2 1/2 32 Extra Fine - Slow Wavy ASB-BM-332 2.30 2.08 Metals 1/32" - 1/8" METAL CUTTING - BI-METAL 4 1/2 18 Smooth - Medium Wavy ASB-BM-418 2.40 2.16 Metals 1/8" - 1/4" 4 1/2 32 Extra Fine - Slow Wavy ASB-BM-432 2.40 2.16 Metals 1/32" - 1/8" 5 1/2 18 Heavy Gauge Metals Wavy ASB-BM-518 2.80 2.56

SABER/JIG SAW BLADES - BAYONET SHANK USA MILLED ST-3 For Porter Cable or Rockwell Machines Models 348, 548, 648 ILLUSTRATION AND COLOR LENGTH WIDTH PER INCH CUT - SPEED APPLICATION TYPE EACH POUCH 5 PCS. BOX 100 PCS. METAL CUTTING - BI-METAL 2 3/8 14 Medium - Fast Wavy SSBP-BM-214 $1.80 $1.62 Metals 1/4" - 3/8" 2 3/8 24 Fine - Slow Wavy SSBP-BM-224 1.80 1.62 Metals 1/16" - 3/16" 3 3/8 18 Smooth - Medium Wavy SSBP-BM-318 2.10 1.88 Metals 1/8" - 1/4" 3-5/8 3/8 18 Smooth - Medium Wavy SSBP-BM-318L 2.20 1.98 Metals 1/8" - 1/4" METAL SCROLL CUTTING - BI-METAL 2 1/4 18 Fine - Slow Wavy SSBP-BMS-218 1.86 1.86 Metals 1/8" - 1/4" WOOD CUTTING - BI-METAL 3 3/8 6 Coarse - Fast Wood up to 2" Alt. SSBP-BW-306 2.10 1.88 3 3/8 10 Smooth - Medium Wood up to 2" Alt. SSBP-BW-310 2.10 1.88 SABER/JIG SAW BLADES - MAKITA SHANK For Makita Models JG 1600, JV 2000, 4300BV, 4301BV USA ILLUSTRATION AND COLOR RED BLADE RED BLADE GROUND FINISH LENGTH WIDTH PER INCH CUT - SPEED APPLICATION METAL CUTTING - HIGH SPEED STEEL MILLED 3-1/4 3/8 14 Medium - Fast Metals 3/16" - 3/8" Wavy SSBM-M-314 $1.62 $1.46 3-1/4 3/8 24 Fine - Slow Metals 1/16" - 3/16" Wavy SSBM-M-324 1.62 1.46 NAIL EMBEDDED WOOD CUTTING - HIGH SPEED STEEL 3-1/4 3/8 10 Smooth - Medium Raker SSBM-NW-310 1.62 1.46 Wood up to 2" WOOD CUTTING - HIGH CARBON TYPE EACH POUCH 5 PCS. BOX 100 PCS. 3-1/4 3/8 8 Medium - Medium Alt. SSBM-W-308 1.06.96 Wood up to 2" 3-1/4 3/8 10 Smooth - Fast Taper SSBM-TG-310 2.00 1.80 Wood up to 2" Ground ABRASIVE MATERIALS CUTTING - CARBIDE GRIT EDGE 3-1/8 5/16 40 Grit Medium - Slow Medium SSBM-CE-3M 3.36 3.02 Ceramic Tile, Fiberglass, Plastic, Cast Iron Pipe, etc.

SABER/JIG SAW BLADES - BOSCH STYLE SHANK USA MILLED ST-4 For Bosch Machines with T-Shank design. ILLUSTRATION AND COLOR RED BLADE RED BLADE SILVER GROUND FINISH LENGTH WIDTH PER INCH CUT - SPEED APPLICATION TYPE EACH POUCH 5 PCS. BOX 100 PCS. METAL CUTTING - COBALT BI-METAL 3-5/8 5/16 14 Medium - Fast Wavy SSBB-BM-314 $2.24 $2.02 Metals 1/4" - 3/8" 3-5/8 5/16 18 Smooth - Medium Wavy SSBB-BM-318 2.24 2.02 Metals 1/8" - 1/4" 3-5/8 5/16 24 Fine - Slow Wavy SSBB-BM-324 2.24 2.02 Metals 1/16" - 3/16" NAIL EMBEDDED WOOD CUTTING - COBALT BI-METAL 4 5/16 6 Coarse - Fast Alt. SSBB-BW-406 2.58 2.34 Wood up to 2-1/4" 4 5/16 8 Medium - Medium Alt. SSBB-BW-408 2.58 2.34 Wood up to 2-1/4" 4 5/16 10 Smooth - Medium Alt. SSBB-BW-410 2.58 2.34 Wood up to 2-1/4" WOOD SCROLL CUTTING - COBALT BI-METAL 4 1/4 10 Smooth - Medium Alt. SSBB-BMS-410 2.58 2.34 Scroll cuts wood up to 2-1/4" FIBERGLASS CUTTING - COBALT BI-METAL 3 5/16 12 Fine - Fast Special SSBB-BMF-312 3.50 3.14 Special tooth and coating METAL CUTTING - HIGH SPEED STEEL 3 5/16 14 Medium - Fast Wavy SSBB-M-314 2.24 2.00 Metals 1/4" - 3/8" 3 5/16 18 Smooth - Medium Wavy SSBB-M-318 2.24 2.00 Metals 1/8" - 1/4" 3 5/16 24 Fine - Slow Wavy SSBB-M-324 2.24 2.00 Metals 1/16" - 3/16" 5 5/16 21 Fine - Slow Wavy SSBB-M-521 2.88 2.58 Pipe and Channels up to 3" NAIL EMBEDDED WOOD CUTTING - HIGH SPEED STEEL 4 5/16 8 Medium - Medium Alt. SSBB-NW-408 2.18 1.96 Wood up to 2-1/4" 5 5/16 14 Smooth - Medium Alt. SSBB-NW-514 2.88 2.58 Wood up to 2-1/4" WOOD CUTTING - HIGH CARBON 4 5/16 6 Coarse - Fast Alt. SSBB-W-406 1.86 1.68 Wood up to 2-1/4" 4 5/16 10 Smooth - Medium Alt. SSBB-W-410 1.38 1.24 Wood up to 2-1/4" 4 5/16 10 Fine - Medium Taper SSBB-TG-410 2.58 2.34 Wood up to 2-1/4" Ground WOOD SCROLL CUTTING - HIGH CARBON 4 1/4 6 Coarse - Fast Alt. SSBB-S-406 1.86 1.68 Scroll cuts wood up to 2-1/4" ABRASIVE MATERIALS CUTTING - CARBIDE GRIT EDGE 3-5/8 5/16 40 Grit Medium - Slow Medium SSBB-CE-300 3.36 3.02 Ceramic Tile, Fiberglass, Plastic, Cast Iron Pipe, etc.

RECIPROCATING SAW BLADES - 1/2" SHANK USA MILLED ST-5 Fits any Reciprocating Saw using 1/2" universal shank. ILLUSTRATION AND COLOR RED BLADE RED BLADE LENGTH WIDTH PER INCH CUT - SPEED APPLICATION TYPE EACH POUCH 5 PCS. BOX 100 PCS. METAL CUTTING - HIGH SPEED STEEL 4 5/8 12 Medium - Fast Raker RSB-M-412 $1.56 $1.40 Metals 1/8" and over 4 5/8 18 Smooth - Medium Raker RSB-M-418 1.56 1.40 Metals 1/8" and under 4 5/8 24 Fine - Slow Raker RSB-M-424 1.56 1.40 Metals 3/64" and under 6 5/8 10 Medium - Fast Raker RSB-M-610 1.90 1.52 Metals 1/4" and over 6 5/8 14 Medium - Fast Raker RSB-M-614 1.90 1.52 Metals 1/8" and over 6 5/8 18 Smooth - Medium Raker RSB-M-618 1.90 1.52 Metals 1/8" and under 8 5/8 10 Medium - Fast Raker RSB-M-810 2.64 2.36 Metals - Deep cuts METAL SCROLL CUTTING - HIGH SPEED STEEL 4 5/16 18 Smooth - Medium Wavy RSB-MS-418 1.62 1.46 Metals 3/64" and over NAIL-EMBEDDED WOOD CUTTING - HIGH ALLOY STEEL 6 5/8 6 Coarse - Fast Alt. RSB-NW-606 1.30 1.18 Roughing work 6 5/8 10 Medium - Medium Alt. RSB-NW-610 1.30 1.18 Standard work 6 5/8 18 Smooth - Medium Wavy RSB-NW-618 1.30 1.18 Finish work 12 5/8 3 Coarse - Very Fast Alt. RSB-NW-123 2.36 2.14 Heavy work 12 5/8 6 Coarse - Fast Alt. RSB-NW-126 2.36 2.14 Roughing work 12 5/8 10 Medium - Medium Alt. RSB-NW-1210 2.36 2.14 Standard work NAIL-FREE WOOD CUTTING - HIGH CARBON 6 5/8 3 Coarse - Very Fast Alt. RSB-W-603 1.30 1.08 Heavy work 9 5/8 3 Coarse - Very Fast Alt. RSB-W-903 2.08 1.86 Heavy work 6 5/8 6 Coarse - Fast Alt. RSB-W-606 1.68 1.54 Roughing work 9 3/4 6 Coarse - Fast Alt. RSB-W-906 2.52 2.28 Roughing work 12 3/4 6 Coarse - Fast Alt. RSB-W-126 3.36 3.04 Roughing work WOOD SCROLL [CONTOUR] CUTTING - HIGH CUTTING 6 1/2 6 Coarse - Fast Alt. RSB-S-606 1.60 1.44 Cutting irregular curves PLASTER CUTTING - HIGH ALLOY STEEL 6 3/4 6 Rough - Fast V- RSB-P-606 1.72 1.54 V-Tooth prevents clogging Tooth

RECIPROCATING SAW BLADES - 1/2" SHANK Fits any Reciprocating Saw using 1/2" universal shank. USA ILLUSTRATION AND COLOR LENGTH WIDTH PER INCH CUT - SPEED APPLICATION METAL CUTTING - COBALT BI-METAL 6 3/4 10 Medium - Fast Raker RSB-BMC-610 $2.66 $2.38 Metals 1/4" and over 6 3/4 14 Medium - Fast Raker RSB-BMC-614 2.66 2.38 Metals 1/8" and over 6 3/4 18 Smooth - Medium Raker RSB-BMC-618 2.66 2.38 Metals 1/8" and under 6 3/4 24 Fine - Slow Raker RSB-BMC-624 2.66 2.38 Metals 3/64" and under 8 3/4 10 Medium - Fast Raker RSB-BMC-810 4.26 3.84 Metals - Deep Cuts METAL CUTTING - BI-METAL 4 5/8 10 Medium - Fast Raker RSB-BM-410 1.76 1.58 Metals 1/4" and over 4 5/8 14 Medium - Fast Raker RSB-BM-414 1.76 1.58 Metals 1/8" and over 4 5/8 18 Smooth - Medium Raker RSB-BM-418 1.76 1.58 Metals 1/8" and under 4 5/8 24 Fine - Slow Wavy RSB-BM-424 1.76 1.58 Metals 3/64" and under 6 5/8 10 Medium - Fast Raker RSB-BM-610 2.46 2.20 Metals 1/4" and over 6 5/8 14 Medium - Fast Raker RSB-BM-614 2.46 2.20 Metals 1/8" and over 6 5/8 18 Smooth - Medium Raker RSB-BM-618 2.46 2.20 Metals 1/8" and under 6 5/8 24 Fine - Slow Wavy RSB-BM-624 2.46 2.20 Metals 3/64" and under 8 5/8 10 Medium - Fast Raker RSB-BM-810 3.82 3.44 Metals - Deep Cuts 6 3/4 5-7 Coarse - Fast Variable RSB-BM-607 3.70 3.34 Metals 1/4" and over Tooth 9 3/4 10-14 Medium - Fast Variable RSB-BM-914 5.60 5.04 Pipe & Channels up to 6" Tooth METAL SCROLL CUTTING - BI-METAL 3-1/2 5/16 18 Smooth - Medium Raker RSB-BMS-318 1.76 1.58 Cutting irregular curves NAIL-EMBEDDED WOOD CUTTING - BI-METAL 6 3/4 6 Coarse - Fast Alt. RSB-BW-606 3.70 3.34 Roughing work 9 3/4 6 Coarse - Fast Alt. RSB-BW-906 4.26 3.84 Roughing work 12 3/4 6 Coarse - Fast Alt. RSB-BW-126 6.06 5.46 Roughing work 6 5/8 10 Medium - Medium Alt. RSB-BW-610 2.36 2.14 Standard work WOOD SCROLL [CONTOUR] CUTTING - BI-METAL ABRASIVE MATERIALS CUTTING - CARBIDE GRIT EDGE TYPE MILLED EACH POUCH 5 PCS. BOX 100 PCS. 6 1/2 6 Coarse - Fast Alt. RSB-BS-606 3.36 3.04 Cutting irregular curves 4 3/4 30 Grit Coarse - Medium Coarse RSB-CE-04 4.06 3.66 6 3/4 30 Grit Ceramic Tile, Fiberglass, Coarse RSB-CE-06 4.58 4.08 8 3/4 30 Grit Plastic, Cast Iron Pipe, Coarse RSB-CE-08 5.60 5.04 9 3/4 30 Grit Stainless Steel, etc. Coarse RSB-CE-09 6.68 6.02 ST-6

HIGH CARBON SCROLL/JIGSAW BLADES USA SPECIAL PURPOSE MILLED ST-7 Scroll/Jigsaw Blades are designed for precise, internal and external cutting of wood, plastic, and non ferrous metals. Plain end styles fit virtually any scroll saw, as well as hand held fret and jewelers saw frames. 5" PLAIN END-REG. EACH PER INCH WIDTH THICKNESS 5 PACK 9.5.062 x.024 SJB-509 $0.46 11.053 x.018 SJB-511 0.40 12.5.038 x.016 SJB-512* 0.40 * With 6 Reverse Teeth CARBIDE GRIT EDGED ROD SAW UK SPECIAL PURPOSE Carbide grit edged sawing wire cuts tile, glass, marble, hardened tool steel, fiber board and many other hard to cut materials. Cuts in both directions. Can cut curves and change cutting direction without altering the saw angle. Self sharpening. Fits all standard hacksaw frames. EACH LENGTH 6" RS-CE-06 1 PC. POUCH $3.08 10 PC. POUCH $2.76 10" RS-CE-10 3.80 3.42 12" RS-CE-12 4.52 4.14

HANDSAWS USA ALL PURPOSE WOOD CUTTING ST-8 Handsaws are available in a variety of styles for all hand cutting needs. Each handsaw is designed for a specific cutting application. The descriptions below will assist the user in selecting the handsaw needed for their particular application. DESCRIPTION CROSSCUT SAWS HEAVY DUTY Wood Handle CROSSCUT SAW GENERAL PURPOSE LENGTH POINTS PER INCH CUT 26" 8 Crosscut - Medium H-CCH-1 $30.60 26" 10 Crosscut - Fine H-CCH-2 30.06 For high quality wood cutting. Chrome-nickel alloy steel blade teeth are bevelfiled and accurately set. 26" 8 Crosscut - Medium H-CC-1 11.52 For general purpose wood cutting. Polished steel blade. Teeth are filed and accurately set. Plastic Handle TOOL BOX SAW HEAVY DUTY Plastic Handle COMPASS SAW SPECIAL PURPOSE 15" 9 Push-Pull Crosscut H-TB-1 18.20 For general purpose wood cutting. New 9-point triangular tooth design cuts in both directions and twice as fast as regular handsaws. Handle designed with 45 and 90 angles for layout and marking. Polished steel blade. Teeth are bevel-filed and accurately set. 12" 8 Crosscut - Medium H-C-1 5.30 For cutting out curved shapes and freehand cutting in wood, plasterboard, plywood and plastic. Polished steel blade teeth are filed and accurately set. Plastic Handle DRYWALL/WALLBOARD SAW SPECIAL PURPOSE Wood Handle DRYWALL SAW SPECIAL PURPOSE Plastic Handle PVC SAWS SPECIAL PURPOSE Aluminum Handle Replacement Blade 6" 8 Ripsaw - Medium H-DW-1 5.30 For making cutouts for electrical outlets in drywall, wallboard, plasterboard and similar materials. Blade has self-starting point for plunge cutting. Polished steel blade. Teeth are filed and accurately set. 15" 5 Ripsaw - Coarse H-D-1 15.12 For cutting quickly through drywall, wallboard, plasterboard, and similar materials. Polished steel blade. Teeth are filed and accurately set. 12" 10 Push-Pull Crosscut H-PVC-1 12.46 18" 10 Push-Pull Crosscut H-PVC-2 15.80 For cutting PVC/ABS plastic pipe, wallboard, nail embedded wood, fiberglass panels, brass and copper tubing, and general purpose woodcutting. Tempered steel blade. Teeth are milled and accurately set. PVC REPLACEMENT BLADES 12" PVC Blade PVCB12 8.30 18" PVC Blade PVCB12 11.64

HIGH SPEED STEEL HAND HACKSAW BLADES USA HEAVY DUTY -HSS MILLED ST-9 Flexible Molybdenum High Speed Steel Blades are double heat treated to provide a hard cutting edge on the teeth and a flexible, shatter resistant back. Used where accuracy and high cutting rates are required. Recommended when work cannot be firmly secured. Ideal for specialized sawing of tool steel, alloy steel and other tough materials. LENGTH WIDTH PER INCH BLADES ARE PAINTED RED 12 1/2 14 HSB-HS-12X14T $2.00 $1.80 $1.62 12 1/2 18 HSB-HS-12X18T 2.00 1.80 1.62 12 1/2 24 HSB-HS-12X24T 2.00 1.80 1.62 12 1/2 32 HSB-HS-12X32T 2.00 1.80 1.62 BI-METAL (8% COBALT) HAND HACKSAW BLADES USA HEAVY DUTY EACH 2 PCS. POUCH 10 PCS. POUCH 100 PCS. BOX MILLED BLADES ARE PAINTED WHITE Bi-Metal Blades have a Molybdenum High Speed Steel cutting edge electronically welded to a tough alloy spring steel back. The full tooth hardness, combined with a flexible back, provides the highest possible cutting efficiency. Shatterproof blades may last twice as long as other HSS blades. Ideal for cutting stainless, pipe, conduit - almost any material. LENGTH WIDTH PER INCH 12 1/2 14 HSB-BM-12X14T $2.00 $1.80 $1.62 12 1/2 18 HSB-BM-12X18T 2.00 1.80 1.62 12 1/2 24 HSB-BM-12X24T 2.00 1.80 1.62 12 1/2 32 HSB-BM-12X32T 2.00 1.80 1.62 CARBIDE GRIT EDGED HAND HACKSAW BLADES USA SPECIAL PURPOSE EACH 2 PCS. POUCH 10 PCS. POUCH 100 PCS. BOX CARBIDE GRIT EDGE BLADES ARE PAINTED BLACK Carbide Grit Edged Hacksaw Blades are extra-wide to help maintain a straight cut and to cut very difficult work: Thin gauge stainless steel, perforated metal, wire rope. Cuts in both directions. Self sharpening. Fits all standard hacksaw frames. EACH LENGTH WIDTH 1 PC. POUCH 10 PCS. POUCH 10 1/2 HSB-CE-10 $3.92 $3.54 12 1/2 HSB-CE-12 4.48 4.04 12 3/4 HSB-CE-12A 4.48 4.04 TOOTH SELECTION Hand Hacksaw Blades can be used to cut a variety of materials and shapes. The proper blade will provide maximum blade life and high cutting efficiency. Selection depends on several considerations. PER INCH 14 TOOTH BLADE - COARSE - 1" or greater cross section cutting 18 TOOTH BLADE - MEDIUM - 1/4" to 1" cross section cutting 24 TOOTH BLADE - FINE - Sheet metal cutting and tubing 32 TOOTH BLADE - VERY FINE - Up to 1/16" Thickness cutting TOOTH SELECTION: Selecting a blade with the correct number of teeth is dependent on the thickness and type of material to be cut. The teeth must never straddle the material and at least 3 teeth must always be in contact. For thin sections, the highest number of teeth should be selected.

HACKSAW FRAMES USA ALL PURPOSE METAL CUTTING ST-10 Hack Saws are available in a variety of styles for all hand metal cutting needs. Each Hack Saw is designed for a specific cutting application. The description below will assist the user in selecting the Hack Saw needed for their particular application. DESCRIPTION FEATURES HIGH TENSION FRAME HEAVY DUTY Die cast aluminum and steel frame Uses 12" bi-metal blade Blade adjusts to cut at either 45 or 90 Blade storage compartment in frame Lever tensions blade to 28,000 psi Use frame as Jab or key hole saw Cutting depth is 3-3/4" HSF-HT-1 $21.78 HIGH TENSION FRAME HEAVY DUTY Die cast aluminum and steel frame Uses 12" bi-metal blade Blade adjusts to cut at either 45 or 90 Blade storage compartment in frame Lever tensions blade to 28,000 psi Use frame as Jab or key hole saw Cutting depth is 4" HSF-HT-2 17.26 JUNIOR (MINI) FRAME HEAVY DUTY Heavy duty ABS frame Uses 6" pin end blade Blade cuts in one direction Tapered nose design for tight spots Cutting depth is 2" HSF-JM-1 3.52 CLOSE QUARTER FRAME HEAVY DUTY Unbreakable nylon frame Uses any size blade, even broken ones Blade position can be adjusted or reversed Cuts flush to surface HSF-CQ-2 3.14 NOTE All saws come with a metal cutting hack saw blade.

HIGH SPEED STEEL POWER HACK SAW BLADES USA HEAVY DUTY MILLED ST-11 All Hard Molybdenum High Speed Steel Blades are fully heat treated throughout for rigidity and exceptional blade life. The all hard feature assures straight cuts and gives excellent results on tough materials. DIMENSIONS: INCHES LENGTH x WIDTH x THICK PER INCH 12 x 1 x.050 10 PHSB12X100X10 12 x 1 x.050 14 PHSB12X100X14 14 x 1 x.050 10 PHSB14X100X10 14 x 1 x.050 14 PHSB14X100X14 14 x 1-1/4 x.062 6 PHSB14X116X.6 14 x 1-1/4 x.062 10 PHSB14X116X10 14 x 1-1/2 x.079 4 PHSB14X132X04 14 x 1-1/2 x.079 6 PHSB14X132X06 17 x 1 x.050 10 PHSB17X100X10 17 x 1 x.050 14 PHSB17X100X14 17 x 1-1/4 x.062 4 PHSB17X100X04 17 x 1-1/4 x.062 6 PHSB17X100X06 CALL FOR PACKAGING: 10 Pcs. / Box DIMENSIONS: INCHES LENGTH x WIDTH x THICK PER INCH 17 x 1-1/4 x.062 10 PHSB17X116X10 18 x 1-1/4 x.062 6 PHSB18X116X06 18 x 1-1/4 x.062 10 PHSB18X116X10 18 x 1-1/2 x.079 4 PHSB18X132X04 18 x 1-1/2 x.079 6 PHSB18X132X06 18 x 1-3/4 x.088 4 PHSB18X148X04 18 x 1-3/4 x.088 6 PHSB18X148X06 21 x 1-3/4 x.088 4 PHSB21X148X04 21 x 1-3/4 x.088 6 PHSB21X148X06 24 x 1-3/4 x.088 6 PHSB24X148X06 24 x 1-3/4 x.088 4 PHSB24X148X04 24 x 2 x.100 4 PHSB24X200X04 PORTABLE BAND SAW BLADES USA GENERAL PURPOSE / HEAVY DUTY MILLED HARD BACK Hard Back Carbon ensures fast and accurate cuts. Excellent for cutting mild steel. BI-METAL Bi-Metal for cutting stainless steel and other tough jobs. Full tooth hardness and flexible back for long blade life. LENGTH WIDTH PER INCH TOOTH SET TOOTH SET 44-7/8 1/2 10 RAKER PB-HB44-10TR 44-7/8 1/2 14 RAKER PB-HB44-14TR 44-7/8 1/2 18 RAKER PB-HB44-18TR 44-7/8 1/2 24 RAKER PB-HB44-24TR LENGTH WIDTH PER INCH CALL FOR PACKAGING: 3 Pcs. / Box 10 Pcs. / Box 100 Pcs. / Box TOOTH SET TOOTH SET 44-7/8 1/2 10 RAKER PB-BM44-10TR 44-7/8 1/2 14 RAKER PB-BM44-14TR 44-7/8 1/2 18 RAKER PB-BM44-18TR 44-7/8 1/2 24 RAKER PB-BM44-24TR 44-7/8 1/2 10 COMBO PB-BM44-10TV NOTE Carbide Grit Edge Portable Band Saw Blades are available upon request.

USA CURED CONCRETE DIAMOND SAW BLADES Roc-Edge Premium Grade Cured Concrete Diamond Saw Blades are designed for wet cutting cured and reinforced concrete, brick, concrete block, bluestone, limestone, roof tile, and all other aggregates. They are laser welded with a special matrix bond on both sides of the segments for strength and long life. Length of cuts: 6,000 to 18,000 inch feet. They are used on hand held high speed power saws and low horse power (20 hp) walk behind saws. Blades meet or exceed DOT and professional concrete/asphalt cutter specifications. SOFT BOND. DESCRIPTION CURED CONCRETE PREMIUM STEEL SPECIAL PURPOSE DIA. x THICKNESS x ARBOR SEG. HEIGHT DIAMOND SEGMENTS 12 x.155 x 1.395 DSB-WP-CC-12A $ 243.64 12 x.250 x 1.395 DSB-WP-CC-12E 443.64 12 x.375 x 1.395 DSB-WP-CC-12F 618.18 14 x.155 x 1.395 DSB-WP-CC-14C 360.00 14 x.250 x 1.395 DSB-WP-CC-14E 610.90 14 x.375 x 1.395 DSB-WP-CC-14F 825.46 16 x.155 x 1.395 DSB-WP-CC-16A 374.54 18 x.142 x 1.433 DSB-WP-CC-18A 563.64 20 x.142 x 1.433 DSB-WP-CC-20A 643.64 24 x.155 x 1.433 DSB-WP-CC-24A 861.82 26 x.155 x 1.433 DSB-WP-CC-26A 978.18 30 x.187 x 1.433 DSB-WP-CC-30A 1254.54 36 x.187 x 1.433 DSB-WP-CC-36A 1683.64 ASPHALT & GREEN CONCRETE DIAMOND SAW BLADES Roc-Edge Premium Grade Asphalt and Green Concrete Diamond Saw Blades are laser welded and designed for wet cutting asphalt, green concrete, and hard aggregate asphalt. All sizes have a 42% diamond concentration and a 10mm (.395) segment height. Deep drop segments for undercut protection is standard for cutting abrasive asphalt. Blades cut 30% faster and last up to 40% longer. Length of cuts: 20,000 to 60,000 inch feet. They are used on hand held high speed power saws and low horse power (20 hp) walk behind saws. Blades meet or exceed DOT and professional concrete/asphalt cutter specifications. HARD BOND. ST-12 DESCRIPTION ASPHALT AND GREEN CONCRETE DIA. x THICKNESS x ARBOR SEG. HEIGHT 12 x.125 x 1-20mm.395 DSB-WP-AGC-12 $ 203.64 14 x.125 x 1-20mm.395 DSB-WP-AGC-14 225.46 12 x.125 x 1-20mm.395 DSB-WS-AGC-12 203.64 14 x.125 x 1-20mm.395 DSB-WS-AGC-14 225.46 PREMIUM STEEL ASPHALT OVER CONCRETE DIAMOND SAW BLADES Roc-Edge Premium Grade Asphalt Over Concrete Diamond Saw Blades are laser welded and designed for wet cutting asphalt over cured concrete, abrasive asphalt, and very hard aggregate asphalt. Deep drop segments for undercut protection is standard for cutting abrasive asphalt. Blades cut 30% faster and last up to 40% longer. Length of cuts: 10,000 to 15,000 inch feet. They are used on hand held high speed power saws and low horse power (20 hp) walk behind saws. Blades meet or exceed DOT and professional concrete/asphalt cutter specifications. HARD BOND. DESCRIPTION ASPHALT OVER CONCRETE PREMIUM STEEL DIA. x THICKNESS x ARBOR SEG. HEIGHT 12 x.142 x 1.395 DSB-WP-AC-12B $ 269.10 12 x.155 x 1.395 DSB-WP-AC-12C 269.10 12 x.250 x 1.395 DSB-WP-AC-12E 490.90 12 x.375 x 1.395 DSB-WP-AC-12F 683.64 14 x.142 x 1.395 DSB-WP-AC-14B 327.28 14 x.250 x 1.395 DSB-WP-AC-14E 538.18 14 x.375 x 1.395 DSB-WP-AC-14F 734.54 16 x.125 x 1.433 DSB-WP-AC-16A 418.18 18 x.142 x 1.433 DSB-WP-AC-18A 629.10 20 x.142 x 1.433 DSB-WP-AC-20A 716.36 24 x.155 x 1.433 DSB-WP-AC-24A 985.46 26 x.155 x 1.433 DSB-WP-AC-26A 1134.54 30 x.187 x 1.433 DSB-WP-AC-30A 1327.28 36 x.187 x 1.433 DSB-WP-AC-36A 1781.82

DRY CUTTING DIAMOND SAW BLADES USA SPECIAL PURPOSE DIAMOND SEGMENTS ST-13 DESCRIPTION CURED CONCRETE BLADE ASPHALT & GREEN CONCRETE BLADE DIA. x THICKNESS x ARBOR SEG. HEIGHT GRADE 12 x.110 x 1-20mm.264 DSB-DP-CC-12A $282.68 12 x.110 x 1-20mm.315 DSB-DP-CC-12B 315.56 PREMIUM 14 x.110 x 1-20mm.264 DSB-DP-CC-14A 319.66 14 x.125 x 1-20mm.315 DSB-DP-CC-14B 351.42 12 x.110 x 1-20mm.315 DSB-DS-CC-12A 322.50 12 x.125 x 1-20mm.378 SUPER DSB-DS-CC-12B 483.20 14 x.110 x 1-20mm.315 PREMIUM DSB-DS-CC-14A 358.40 14 x.125 x 1-20mm.378 DSB-DS-CC-14B 518.78 Recommended for cutting cured concrete, brick, and non-abrasive materials. General purpose, soft to medium aggregate. 12 x.125 x 1-20mm.315 DSB-DP-AGC-12 371.20 PREMIUM 14 x.125 x 1-20mm.315 DSB-DP-AGC-14 441.24 12 x.125 x 1-20mm.378 SUPER DSB-DS-AGC-12 460.46 14 x.125 x 1-20mm.378 PREMIUM DSB-DS-AGC-14 537.26 Recommended for cutting asphalt and soft green concrete. General purpose, medium aggregate asphalt. BRICK & BLOCK BLADE 12 x.110 x 1-20mm.315 DSB-DP-BB-12 311.48 Premium 14 x.110 x 1-20mm.315 DSB-DP-BB-14 357.00 12 x.110 x 1-20mm.378 Super DSB-DS-BB-12 390.42 14 x.110 x 1-20mm.378 Premium DSB-DS-BB-14 442.32 Recommended for cutting regular brick and concrete light weight block. BLOCK BLADE 12 x.125 x 1-20mm.315 DSB-DP-BLK-12 339.22 14 x.125 x 1-20mm.315 Premium DSB-DP-BLK-14 385.42 20 x.125 x 1-20mm.315 DSB-DP-BLK-20 686.24 12 x.125 x 1-20mm.378 DSB-DS-BLK-12 418.84 Super 14 x.125 x 1-20mm.378 Premium DSB-DS-BLK-14 470.76 20 x.142 x 1.378 DSB-DS-BLK-20 814.22 Recommended for cutting concrete light weight block, soft brick, and limestone. TUCK POINTING BLADE 4 x.250 x 7/8-5/8.275 DSB-DP-TP-04 129.44 Premium 7 x.250 x 7/8-5/8.275 DSB-DP-TP-07 270.94 4 x.250 x 7/8-5/8.354 DSB-DS-TP-04 151.12 Super 5 x.250 x 7/8-5/8.354 Premium DSB-DS-TP-05 200.20 7 x.250 x 7/8-5/8.354 DSB-DS-TP-07 283.18 Recommended for routing old mortar between brick and block joints. Can be used on circular saws or angle grinders.

DRY CUTTING DIAMOND SAW BLADES USA SPECIAL PURPOSE DIAMOND SEGMENTS ST-14 DESCRIPTION SEGMENTED TURBO BLADE DIA. x THICKNESS x ARBOR SEG. HEIGHT GRADE 12 x.125 x 1-20mm.315 DSB-DP-ST-12 $383.30 PREMIUM 14 x.125 x 1-20mm.315 DSB-DP-ST-14 460.80 12 x.125 x 1-20mm.354 SUPER DSB-DS-ST-12 413.88 14 x.125 x 1-20mm.354 PREMIUM DSB-DS-ST-14 486.04 Recommended for cutting hard aggregates and hard masonry materials. TURBO BLADE 4 x.090 x 7/8-5/8.295 DSB-DP-T-04 41.24 4.5 x.090 x 7/8-5/8.295 DSB-DP-T-045 48.02 5 x.090 x 7/8-5/8.295 DSB-DP-T-05 55.12 7 x.100 x -5/8.295 DSB-DP-T-07 83.92 8 x.100 x -5/8.295 PREMIUM DSB-DP-T-08 99.22 9 x.105 x -5/8.295 DSB-DP-T-09 125.16 10 x.110 x -5/8.295 DSB-DP-T-10 179.20 12 x.118 x 1-20mm.295 DSB-DP-T-12 277.34 14 x.125 x 1-20mm.295 DSB-DP-T-14 317.52 Recommended for cutting concrete, brick, and paving stones. SMALL DIAMETER SEGMENTED BLADE 4 x.080 x 7/8-5/8.275 DSB-DP-SDS-04 46.58 4.5 x.080 x 7/8-5/8.275 DSB-DP-SDS-045 52.98 5 x.088 x 7/8-5/8.275 DSB-DP-SDS-05 61.52 7 x.088 x -5/8.275 PREMIUM DSB-DP-SDS-07 91.02 8 x.095 x -5/8.275 DSB-DP-SDS-08 117.70 9 x.100 x -5/8.275 DSB-DP-SDS-09 152.20 Recommended for cutting concrete, brick, stone, and hard materials. CONTINUOUS RIM TILE BLADE SMALL DIAMETER LASER WELDED BLADE 4 x.060 x 7/8-5/8.236 DSB-DP-CRT-04 25.98 4.5 x.060 x 7/8-5/8.236 DSB-DP-CRT-045 29.86 6 x.060 x 5/8.236 DSB-DP-CRT-06 38.40 7 x.060 x 5/8.236 DSB-DP-CRT-07 49.42 8 x.060 x 5/8.236 PREMIUM DSB-DP-CRT-08A 50.14 8 x.087 x 5/8.374 DSB-DP-CRT-08B 106.32 10 x.060 x 5/8.236 DSB-DP-CRT-10A 67.20 10 x.087 x 5/8.374 DSB-DP-CRT-10B 129.80 12 x.087 x 1.275 DSB-DP-CRT-12 120.54 14 x.087 x 1.275 DSB-DP-CRT-14 157.52 Recommended for cutting ceramic tile, slate, glazed tile, and marble. 4 x.090 x 7/8-5/8.315 DSB-DP-SDL-04 57.96 4.5 x.090 x 7/8-5/8.315 DSB-DP-SDL-045 66.50 5 x.090 x 7/8-5/8.315 DSB-DP-SDL-05 83.20 7 x.090 x -5/8.315 PREMIUM DSB-DP-SDL-07 113.78 8 x.100 x -5/8.315 DSB-DP-SDL-08 142.58 9 x.100 x -5/8.315 DSB-DP-SDL-09 177.44 10 x.100 x -5/8.315 DSB-DP-SDL-10 212.64 Recommended for cutting concrete, brick, and other hard materials.

CARBIDE TIPPED CIRCULAR SAW BLADES USA HEAVY DUTY CARBIDE TIPPED Carbide Tipped Circular Saw Blades are designed for heavy duty construction work. They are manufactured with genuine Tungsten Carbide Tips and will last up to 60 times longer than steel blades. Blades are precision balanced and have sharp cutting edges for fast, smooth cuts. ST-15 DESCRIPTION COMBINATION RIP STANDARD KERF DIAMETER OF ARBOR EACH 1 PC. 10 PC. 25 PC. 6-1/2 12 5/8 UNIV CTCB-SK-06512 $11.84 - $10.98 6-1/2 20 5/8 UNIV CTCB-SK-06512 10.38-9.70 7-1/4 16 5/8 UNIV CTCB-SK-0716 8.82-8.14 7-1/4 20 5/8 UNIV CTCB-SK-0720 9.76-9.08 7-1/4 24 5/8 UNIV CTCB-SK-0724 9.26-8.58 7-1/4 40 5/8 UNIV CTCB-SK-0740 15.12-14.46 8-1/4 24 5/8 CTCB-SK-0824 18.48 17.82-8-1/4 40 5/8 CTCB-SK-0840 20.58 19.90-10 28 5/8 CTCB-SK-1028 21.04 20.38-10 40 5/8 CTCB-SK-1040 21.34 20.66-10 60 5/8 CTCB-SK-1060 25.44 24.76-12 60 1 CTCB-SK-1260 47.16 - - Crosscuts and rips in solid wood, plywood, particle board, chipboard and other heavy duty sawing. This is a workhorse blade for the construction trade. ABRASIVE CUT-OFF WHEELS USA HEAVY DUTY RESIN BONDED DESCRIPTION DIA. x THICKNESS x ARBOR MAX R.P.M. EACH METAL CUTTING 6-1/2 x 3/32 x -5/8 8600 ACW-M-632 $4.22 7 x 3/32 x -5/8 8600 ACW-M-700 4.14 8 x 3/32 x -5/8 7500 ACW-M-800 4.38 10 PC. This wheel is designed for use with electric circular saws to cut most ferrous metals, e.g., structural steel, sheet metal, etc. MASONRY CUTTING 6-1/2 x 1/8 x -5/8 8600 ACW-MAS-632 3.26 7 x 1/8 x -5/8 8600 ACW-MAS-700 3.70 8 x 1/8 x -5/8 7500 ACW-MAS-800 4.58 This wheel is designed for use with electric circular saws to cut most masonry materials, e.g., concrete, masonry, brick, block, stone, aluminum, non-ferrous metals.

(M3) BI-METAL HOLE SAWS USA HEAVY DUTY VARIABLE PITCH ST-16 SEPARATE ARBOR STYLE RED FINISH Bi-Metal Hole Saws have a high speed steel cutting edge, electron-beam welded to a tough alloy steel back. They cut clean and accurate holes 1-1/2" deep in virtually any machinable material - steel, cast iron, stainless steel, non-ferrous metals, wood, or plastics. Arbor is sold separately. Extra Large Hole Saws are any hole saw larger than 6 inches. TAP ENTRANCE USE ARBOR 9/16 3/8 1/4 HS-BM036 $ 6.60 5/8 - - HS-BM040 6.20 11/16 - - HS-BM044 6.20 3/4 1/2 3/8 HS-BM048 6.20 13/16 - - HSM-3 HS-BM052 6.20 7/8 3/4 1/2 HSM-6 HS-BM056 6.36 15/16 - - or HS-BM060 6.36 1 - - HSM-9 HS-BM100 6.36 1-1/16 - - HS-BM104 6.48 1-1/8 1 3/4 HS-BM108 6.48 1-3/16 - - HS-BM112 6.48 1-1/4 - - HSM-4 HS-BM116 6.60 1-5/16 - - HSM-5 HS-BM120 6.60 1-3/8-1 or HS-BM124 7.02 1-7/16 - - HSM-7 HS-BM128 7.02 1-1/2 1-1/4 - HS-BM132 7.32 1-9/16 - - HS-BM136 7.32 1-5/8 - - HS-BM140 7.32 1-11/16 - - HS-BM144 7.64 1-3/4 1-1/2 1-1/4 HS-BM148 9.00 1-13/16 - - HS-BM152 9.00 1-7/8 - - HS-BM156 9.00 2-1-1/2 HS-BM200 9.00 2-1/16 - - HS-BM204 11.18 2-1/8 - - HS-BM208 11.18 2-1/4 2 - HS-BM216 11.18 2-5/16 - - HS-BM220 11.18 2-3/8 - - HS-BM224 11.18 2-1/2-2 HS-BM232 12.00 (M3) BI-METAL TAP HOLE SAW KITS PLASTIC CASES ENTRANCE USE ARBOR 2-9/16 - - HS-BM236 $12.00 2-5/8 2-1/2 - HS-BM240 12.00 2-3/4 - - HS-BM248 12.00 2-7/8 - - HS-BM256 12.00 3-2-1/2 HS-BM300 12.36 3-1/8 - - HS-BM308 12.36 3-1/4 3 - HS-BM316 13.64 3-3/8 - - HS-BM324 13.64 3-1/2 - - HS-BM332 13.64 3-5/8-3 HSM-4 HS-BM340 14.74 3-3/4 3-1/2 - or HS-BM348 17.10 3-7/8 - - HSM-5 HS-BM356 17.24 4 - - HS-BM400 17.80 4-1/8-3-1/2 HS-BM408 18.48 4-1/4 4 - HS-BM416 23.10 4-3/8 - - HS-BM424 25.42 4-1/2-4 HS-BM432 25.42 4-3/4 - - HS-BM448 27.72 5 - - HS-BM500 30.04 5-1/2 - - HS-BM532 32.34 5-3/4 - - HS-BM548 43.90 6 - - HS-BM600 50.82 EXTRA LARGE HOLE SAWS 6-5/16 - - HS-BM620 73.24 6-1/2 - - HS-BM632 76.24 6-5/8-6 HSM-4 HS-BM640 82.48 7 - - or HS-BM700 82.48 7-7/8 - - HSM-5 HS-BM756 90.56 8-1/4 - - HS-BM816 90.56 DESCRIPTION MECHANIC S HOLE SAW KIT - 1 ea. 7/8, 1, 1-1/8, 1-1/4, HSK-BM-06M $ 77.88 1-1/2 Hole Saws, HSM-6 Arbor. MAINTENANCE HOLE SAW KIT - 1 ea. 3/4, 7/8, 1-1/8, 1-3/8, HSK-BM-13M 206.52 1-1/2, 1-3/4, 2, 2-1/4, 2-1/2 Hole Saws, HSM-3, HSM-4, HSM-6 Arbors and 12" extension. PLUMBER S HOLE SAW KIT- 1 ea. 3/4, 7/8, 1-1/8, 1-1/2, HSK-BM-09P 139.28 1-3/4, 2-1/4 Hole Saws, HSM-3 and HSM-4 Arbors, and HSPD-3S Pilot Drill. ELECTRICIAN S HOLE SAW KIT - 1 ea. 7/8, 1-1/8, 1-3/8, HSK-BM-09E 151.92 1-3/4, 2, 2-1/2 Hole Saws, HSM-3 and HSM-4 Arbors, and HSPD-3S Pilot Drill.

(M3) BI-METAL METRIC HOLE SAWS USA HEAVY DUTY VARIABLE PITCH ST-17 SEPARATE ARBOR STYLE RED FINISH Metric Bi-Metal Hole Saws have a high speed steel cutting edge, electron-beam welded to a tough alloy steel back. They cut clean and accurate holes 1-1/2" (38.1mm) deep in virtually any machinable material - steel, cast iron, stainless steel, non-ferrous metals, wood, or plastics. Arbor is sold separately. Extra Large Hole Saws are any hole saw larger than 152mm. (mm) TAP ENTRANCE USE ARBOR 14mm 3/8 1/4 HS-BMM014.00 $ 6.60 16mm - - HS-BMM016.00 6.20 17mm - - HS-BMM017.00 6.20 19mm 1/2 3/8 HS-BMM019.00 6.20 20mm - - HSM-3 HS-BMM020.00 6.20 21mm - - HSM-6 HS-BMM021.00 6.20 22mm 3/4 1/2 or HS-BMM022.00 6.36 24mm - - HSM-9 HS-BMM024.00 6.36 25mm - - HS-BMM025.00 6.36 27mm - - HS-BMM027.00 6.48 29mm 1 3/4 HS-BMM029.00 6.48 30mm - - HS-BMM030.00 6.48 32mm - - HSM-4 HS-BMM032.00 6.60 33mm - - HSM-5 HS-BMM033.00 6.60 35mm - 1 or HS-BMM035.00 7.02 37mm - - HSM-7 HS-BMM037.00 7.02 38mm 1-1/4 - HS-BMM038.00 7.32 40mm - - HS-BMM040.00 7.32 41mm - - HS-BMM041.00 7.32 43mm - - HS-BMM043.00 7.64 44mm 1-1/2 1-1/4 HS-BMM044.00 9.00 46mm - - HSM-4 HS-BMM046.00 9.00 48mm - - or HS-BMM048.00 9.00 51mm - 1-1/2 HSM-5 HS-BMM050.00 9.00 52mm - - HS-BMM052.00 11.18 54mm - - HS-BMM054.00 11.18 57mm 2 - HS-BMM057.00 11.18 59mm - - HS-BMM059.00 11.18 60mm - - HS-BMM060.00 11.18 64mm - 2 HS-BMM064.00 12.00 (mm) (M3) BI-METAL TAP ENTRANCE METRIC HOLE SAW KITS PLASTIC CASES USE ARBOR 65mm - - HS-BMM065.00 $12.00 67mm 2-1/2 - HS-BMM067.00 12.00 70mm - - HS-BMM070.00 12.00 73mm - - HS-BMM073.00 12.00 76mm - 2-1/2 HS-BMM076.00 12.36 79mm - - HS-BMM079.00 12.36 83mm 3 - HS-BMM083.00 13.64 86mm - - HS-BMM086.00 13.64 89mm - - HS-BMM089.00 13.64 92mm - 3 HSM-4 HS-BMM092.00 14.74 95mm 3-1/2 - or HS-BMM095.00 17.10 98mm - - HSM-5 HS-BMM098.00 17.24 102mm - - HS-BMM102.00 17.80 105mm - 3-1/2 HS-BMM105.00 18.48 108mm 4 - HS-BMM108.00 23.10 111mm - - HS-BMM111.00 25.42 114mm - 4 HS-BMM114.00 25.42 121mm - - HS-BMM121.00 25.42 127mm - - HS-BMM127.00 27.72 133mm - - HS-BMM133.00 30.04 140mm - - HS-BMM140.00 32.34 146mm - - HS-BMM146.00 43.90 152mm - - HS-BMM152.00 50.82 EXTRA LARGE HOLE SAWS 160mm - 6 HS-BMM160.00 73.24 165mm - - HS-BMM165.00 76.24 HSM-4 168mm - - HS-BMM168.00 82.48 or 177mm - - HS-BMM177.00 82.48 HSM-5 200mm - - HS-BMM200.00 90.56 210mm - - HS-BMM210.00 90.56 DESCRIPTION MECHANIC S METRIC HOLE SAW KIT - 1 ea. 22mm, HSK-BMM-06M $ 77.88 25mm, 29mm, 32mm, 38mm Hole Saws, HSM-6 Arbor. MAINTENANCE METRIC HOLE SAW KIT - 1 ea. 19mm, 22mm, HSK-BMM-13M 206.52 29mm, 35mm, 38mm, 44mm, 51mm, 57mm, 64mm Hole Saws, HSM-3, HSM-4, HSM-6 Arbors and 12" extension. PLUMBER S METRIC HOLE SAW KIT - 1 ea. 19mm, 22mm, HSK-BMM-09P 139.28 29mm, 38mm, 44mm, 57mm Hole Saws, HSM-3 and HSM-4 Arbors, and HSPD-3S Pilot Drill. ELECTRICIAN S METRIC HOLE SAW KIT - 1 ea. 22mm, HSK-BMM-09E 151.92 29mm, 35mm, 44mm, 51mm, 64mm Hole Saws, HSM-3 and HSM-4 Arbors, and HSPD-3S Pilot Drill.

(M3) BI-METAL HOLE SAWS USA HEAVY DUTY VARIABLE PITCH ST-18 BUILT-IN 7/16 ARBOR STYLE 7/16 RED FINISH Bi-Metal Hole Saws have a high speed steel cutting edge, electron-beam welded to a tough alloy steel back. They cut clean and accurate holes 1-1/2" deep in virtually any machinable material - steel, cast iron, stainless steel, non-ferrous metals, wood, or plastics. TAP ENTRANCE 9/16 3/8 1/4 HS-BMA036 $ 8.68 5/8 - - HS-BMA040 8.68 11/16 - - HS-BMA044 8.68 3/4 1/2 3/8 HS-BMA048 8.60 13/16 - - HS-BMA052 9.24 7/8 3/4 1/2 HS-BMA056 9.24 15/16 - - HS-BMA060 9.24 1 - - HS-BMA100 9.24 1-1/16 - - HS-BMA104 9.24 1-1/8 1 3/4 HS-BMA108 9.24 1-3/16 - - HS-BMA112 9.24 1-1/4 - - HS-BMA116 9.24 1-5/16 - - HS-BMA120 9.24 1-3/8-1 HS-BMA124 9.84 1-7/16 - - HS-BMA128 9.84 1-1/2 1-1/4 - HS-BMA132 9.84 1-9/16 - - HS-BMA136 9.84 1-5/8 - - HS-BMA140 9.84 1-11/16 - - HS-BMA144 9.84 1-3/4 1-1/2 1-1/4 HS-BMA148 11.56 1-13/16 - - HS-BMA152 11.56 1-7/8 - - HS-BMA156 11.56 2-1-1/2 HS-BMA200 11.56 2-1/16 - - HS-BMA204 13.86 2-1/8 - - HS-BMA208 13.86 2-1/4 2 - HS-BMA216 13.86 2-5/16 - - HS-BMA220 13.86 2-3/8 - - HS-BMA224 13.86 2-1/2-2 HS-BMA232 15.60 (M3) BI-METAL HOLE SAW KITS (BUILT-IN ARBOR) PLASTIC CASES TAP ENTRANCE 2-9/16 - - HS-BMA236 $15.60 2-5/8 2-1/2 - HS-BMA240 15.60 2-3/4 - - HS-BMA248 15.60 2-7/8 - - HS-BMA256 15.60 3-2-1/2 HS-BMA300 16.18 3-1/8 - - HS-BMA308 16.18 3-1/4 3 - HS-BMA316 18.48 3-3/8 - - HS-BMA324 18.48 3-1/2 - - HS-BMA332 18.48 3-5/8-3 HS-BMA340 20.80 3-3/4 3-1/2 - HS-BMA348 24.84 3-7/8 - - HS-BMA356 25.42 4 - - HS-BMA400 27.72 4-1/8-3-1/2 HS-BMA408 27.72 4-1/4 4 - HS-BMA416 32.34 4-3/8 - - HS-BMA424 39.28 4-1/2-4 HS-BMA432 48.52 4-3/4 - - HS-BMA448 53.14 5 - - HS-BMA500 57.76 5-1/2 - - HS-BMA532 69.30 6 - - HS-BMA600 74.74 EXTRA LARGE HOLE SAWS 6-5/16 - - HS-BMA620 79.36 6-1/2 - - HS-BMA632 81.78 6-5/8-6 HS-BMA640 83.42 7 - - HS-BMA700 88.04 7-7/8 - - HS-BMA756 96.24 8-1/4 - - HS-BMA816 96.24 DESCRIPTION MECHANIC S HOLE SAW KIT - 1 ea. 7/8, 1, 1-1/8, 1-1/4, 1-1/2 Hole Saws, and 1 Pilot Drill HSK-BMA-06 $ 82.88 ELECTRICIAN S HOLE SAW KIT - 1 ea. 7/8, 1-1/8, 1-3/8, 1-3/4, 2, 2-1/2 Hole Saws, and 3 Pilot Drills HSK-BMA-09E 116.94 PLUMBER S HOLE SAW KIT - 1 ea. 3/4, 7/8, 1-1/8, 1-1/2, 1-3/4, 2-1/4 Hole Saws, and 3 Pilot Drills HSK-BMA-09P 110.94 LOCKSMITH S HOLE SAW KIT- 1 ea. 3/4, 7/8, 1, 1-3/8, 1-1/2, 1-5/8, 1-3/4, 2-1/8 Hole Saws, 4 Pilot Drills and 1 Screwdriver HSK-BMA-13L 152.70 MAINTENANCE HOLE SAW KIT - 1 ea. 3/4, 7/8, 1-1/8, 1-3/8, HSK-BMA-15M 192.16 1-1/2, 1-3/4, 2, 2-1/4, 2-1/2 Hole Saws, 4 Pilot Drills, 12" Extension, and 1 Screwdriver

(M3) BI-METAL METRIC HOLE SAWS USA HEAVY DUTY VARIABLE PITCH ST-19 BUILT-IN 7/16 ARBOR STYLE 7/16 RED FINISH Metric Bi-Metal Hole Saws have a high speed steel cutting edge, electron-beam welded to a tough alloy steel back. They cut clean and accurate holes 1-1/2 (38.1mm) deep in virtually any machinable material - steel, cast iron, stainless steel, non-ferrous metals, wood, or plastics. TAP ENTRANCE 14mm 3/8 1/4 HS-BMMA014.00 $8.68 16mm - - HS-BMMA016.00 8.68 17mm - - HS-BMMA017.00 8.68 19mm 1/2 3/8 HS-BMMA019.00 8.68 20mm - - HS-BMMA020.00 9.24 21mm - - HS-BMMA021.00 9.24 22mm 3/4 1/2 HS-BMMA022.00 9.24 24mm - - HS-BMMA024.00 9.24 25mm - - HS-BMMA025.00 9.24 27mm - - HS-BMMA027.00 9.24 29mm 1 3/4 HS-BMMA029.00 9.24 30mm - - HS-BMMA030.00 9.24 32mm - - HS-BMMA032.00 9.24 33mm - - HS-BMMA033.00 9.24 35mm - 1 HS-BMMA035.00 9.24 37mm - - HS-BMMA037.00 9.24 38mm 1-1/4 - HS-BMMA038.00 9.24 40mm - - HS-BMMA040.00 9.24 41mm - - HS-BMMA041.00 9.24 43mm - - HS-BMMA043.00 9.24 44mm 1-1/2 1-1/4 HS-BMMA044.00 11.56 46mm - - HS-BMMA046.00 11.56 48mm - - HS-BMMA048.00 11.56 51mm - 1-1/2 HS-BMMA051.00 11.56 52mm - - HS-BMMA052.00 13.86 54mm - - HS-BMMA054.00 13.86 57mm 2 - HS-BMMA057.00 13.86 59mm - - HS-BMMA059.00 13.86 60mm - - HS-BMMA060.00 13.86 64mm - 2 HS-BMMA064.00 15.60 (M3) BI-METAL METRIC HOLE SAW KITS (BUILT-IN ARBOR) PLASTIC CASES TAP ENTRANCE 65mm - - HS-BMMA065.00 $15.60 67mm 2-1/2 - HS-BMMA067.00 15.60 70mm - - HS-BMMA070.00 15.60 73mm - - HS-BMMA073.00 15.60 76mm - 2-1/2 HS-BMMA076.00 16.18 79mm - - HS-BMMA079.00 16.18 83mm 3 - HS-BMMA083.00 18.48 86mm - - HS-BMMA086.00 18.48 89mm - - HS-BMMA089.00 18.48 92mm - 3 HS-BMMA092.00 20.80 95mm 3-1/2 - HS-BMMA095.00 24.84 98mm - - HS-BMMA098.00 25.42 102mm - - HS-BMMA102.00 27.72 105mm - 3-1/2 HS-BMMA105.00 27.72 108mm 4 - HS-BMMA108.00 32.34 111mm - - HS-BMMA111.00 39.28 114mm - 4 HS-BMMA114.00 48.52 121mm - - HS-BMMA121.00 53.14 127mm - - HS-BMMA127.00 57.76 140mm - - HS-BMMA140.00 69.30 146mm - - HS-BMMA146.00-152mm - - HS-BMMA152.00 74.74 EXTRA LARGE HOLE SAWS 160mm - - HS-BMMA160.00 79.36 165mm - - HS-BMMA165.00 81.78 168mm - 6 HS-BMMA168.00 83.42 177mm - - HS-BMMA177.00 88.04 200mm - - HS-BMMA200.00 96.24 210mm - - HS-BMMA210.00 96.24 DESCRIPTION MECHANIC S METRIC HOLE SAW KIT - 1 ea. 22mm, 25mm, HSK-BMMA-06 29mm, 32mm, 38mm Hole Saws, and 1 Pilot Drill $ 82.88 ELECTRICIAN S METRIC HOLE SAW KIT - 1 ea. 22mm, 29mm, 35mm, 44mm, 51mm, 64mm Hole Saws, and 3 Pilot Drills HSK-BMMA-09E 116.94 PLUMBER S METRIC HOLE SAW KIT - 1 ea. 19mm, 22mm, 29mm, 38mm, 44mm, 57mm Hole Saws, and 3 Pilot Drills HSK-BMMA-09P 110.94 LOCKSMITH S METRIC HOLE SAW KIT- 1 ea. 19mm, 22mm, HSK-BMMA-13L 152.70 25mm, 35mm, 38mm, 41mm, 44mm, 54mm Hole Saws, 4 Pilot Drills and 1 Screwdriver MAINTENANCE METRIC HOLE SAW KIT - 1 ea. 19mm, HSK-BMMA-15M 192.16 22mm, 29mm, 35mm, 38mm, 44mm, 51mm, 57mm, 64mm Hole Saws, 4 Pilot Drills, 12" Extension and 1 Screwdriver

HOLE SAW ARBOR / 1/4" PILOT DRILLS USA MANDRELS ST-20 Fits all standard Bi-Metal Hole Saws. DESCRIPTION THREAD FITS HOLE SAWS SHANK 1/2-20 9/16 to 1-3/16 7/16 Hex HSM-3 $12.02 5/8-18 1-1/4 to 6 7/16 Hex HSM-4 20.40 5/8-18 1-1/4 to 6 5/8 Hex HSM-5 20.40 1/2-20 9/16 to 1-1/2 1/4 Rd HSM-6 8.66 5/8-18 1-1/4 to 1-7/16 7/16 Hex HSM-7 12.86 1/2-20 9/16 to 1-3/16 5/16 Hex HSM-9 12.02 1/2-20 9/16 to 1-3/16 1/4 Hex Quick Change HSM-9QC CALL 5/8-18 1-3/4 to 3 1/4 Hex Quick Change HSM-10QC CALL 1/2-20 9/16 to 1-3/16 SDS Shank HSM-3SDS CALL 5/8-18 1-1/4 to 7-7/8 SDS Shank Quick Change HSM-4SDS CALL 5/8-18 1-1/4 to 7-7/8 SDS Shank Quick Change HSM4-SDSPD CALL PLUG EJECTING (HOLE SAW) ARBOR ADAPTER WITH 1/4" PILOT DRILL USA ADAPTERS Plug Ejecting Arbor Adapters convert all standard Hole Saws into plug ejecting style. Just screw adapter into hole saw, then insert Plug Ejecting Arbor, cut hole, put drill in reverse and plug is ejected. Speeds up production 400%. DESCRIPTION FITS HOLE SAWS SHANK THREAD HSMA-PE1 3/4 to 1-3/16 1/4 Hex 1/2-20 $18.26 HSMA-PE2 1-1/4 to 6 3/8 Hex 5/8-18 18.26 HOW TO USE 1. Drill Hole 2. Wedge Saw 3. Reverse Drill to Eject Plug 4. Spin Cup Forward to Reset Saw

WIS HIGH SPEED STEEL HOLE SAW PILOT DRILLS SPECIAL PURPOSE 118 / 135 S/P ST-21 Hole Saw Pilot Drills fit all styles of Hole Saws and are available with a 118 point or 135 split point. DIA. x LGTH. 3 STEPS ON SHANK FOR SET SCREW 3 FLATS ON SHANK DRILL POINT DESCRIPTION 1/4 x 4 118 Point 3 Ground Steps on Shank for Screws HSPD-3S $2.80 10/12 1/4 x 4 135 Split Point 3 Ground Steps on Shank for Screws HSPD-3SH 2.80 10/12 1/4 x 4 118 Point 3 Ground Flats on Shank (3 Sides) HSPD-3F 2.80 10/12 1/4 x 4 135 Split Point 3 Ground Flats on Shank (3 Sides) HSPD-3FH 2.80 10/12 UNIT PKG. CARBIDE TIPPED PILOT DRILL SPECIAL PURPOSE HOLE SAW EXTENSIONS SPECIAL PURPOSE 3 STEPS ON SHANK FOR SET SCREW For use in Hole Saws, Hole Cutters, and other Pilot Tools. DESCRIPTION 1/4x4 3 Steps on Shank for Screw CTHSPD016 $6.72 For boring jobs requiring longer reach. Extensions can be connected to one another for extra long reach. Hex wrench included. HEX SHANK LENGTH 7/16 12 HSX028 $12.32 MANDREL (ARBOR) ADAPTER SPECIAL PURPOSE Adapts Arbors with 1/2-20 threads to fit hole saws with 5/8-18 threads. DESCRIPTION Fits HSM-3, HSM-6, and HSMA $5.00 HSM-9 Mandrels

CARBIDE TIPPED HOLE SAWS USA SPECIAL PURPOSE CARBIDE TIPPED ST-22 Carbide Tipped Hole Saws retain their cutting edge up to 10 times longer than high speed steel hole saws. They cut clean and accurate holes 1-7/8" deep. Carbide tips withstand heat and abrasion extremely well and can be run at faster speeds, resulting in a reduction of cutting time and cost per cut. Carbide Tipped Hole Saws are not designed for cutting concrete, steel, or other ferrous materials. They are designed for cutting abrasive materials; i.e. fiberglass, particle board, aluminum castings, copper and asbestos board. TAP ENTRANCE USE ARBOR 3/4 1/2 3/8 HS-CT048 $ 17.24 13/16 - - HS-CT052 16.87 7/8 3/4 1/2 HSM-3 HS-CT056 17.38 15/16 - - HSM-6 HS-CT060 18.03 1 - - or HS-CT100 18.54 1-1/16 - - HSM-9 HS-CT104 19.19 1-1/8 1 3/4 HS-CT108 19.65 1-3/16 - - HS-CT112 20.35 1-1/4 - - HSM-4 HS-CT116 20.44 1-5/16 - - HSM-5 HS-CT120 20.58 1-3/8-1 or HS-CT124 20.76 1-7/16 - - HSM-7 HS-CT128 20.81 1-1/2 1-1/4 - HS-CT132 21.27 1-9/16 - - HS-CT136 22.06 1-5/8 - - HS-CT140 22.57 1-11/16 - - HS-CT144 23.08 1-3/4 1-1/2 1-1/4 HSM-4 HS-CT148 23.64 1-13/16 - - or HS-CT152 24.15 1-7/8 - - HSM-5 HS-CT156 24.66 2-1-1/2 HS-CT200 25.35 2-1/16 - - HS-CT204 29.34 2-1/8 - - HS-CT208 29.85 2-1/4 2 - HS-CT216 30.87 2-5/16 - - HS-CT220 31.47 CARBIDE TIPPED HOLE SAW KIT PLASTIC CASES DESCRIPTION MAINTENANCE CARBIDE TIPPED HOLE SAW KIT - 1 ea. 3/4, 7/8, 1-1/8, 1-3/8, 1-1/2, 1-3/4, 2, HSK-CT-13M $280.00 2-1/4, 2-1/2 Hole Saws, HSM-3, HSM-4, HSM-6 Arbors and 12" extension. TAP ENTRANCE USE ARBOR 2-3/8 - - HS-CT224 $ 31.89 2-1/2-2 HS-CT232 33.37 2-9/16 - - HS-CT236 33.93 2-5/8 2-1/2 - HS-CT240 33.44 2-3/4 - - HS-CT248 35.50 2-7/8 - - HS-CT256 36.57 3-2-1/2 HS-CT300 37.59 3-1/8 - - HS-CT308 45.24 3-1/4 3 - HS-CT316 46.44 3-3/8 - - HSM-4 HS-CT324 49.36 3-1/2 - - or HS-CT332 50.01 3-5/8-3 HSM-5 HS-CT340 51.08 3-3/4 3-1/2 - HS-CT348 52.51 3-7/8 - - HS-CT356 53.53 4 - - HS-CT400 55.81 4-1/8-3-1/2 HS-CT408 77.50 4-1/4 4 - HS-CT416 80.28 4-3/8 - - HS-CT424 81.30 4-1/2-4 HS-CT432 81.72 4-3/4 - - HS-CT448 88.99 5 - - HS-CT500 91.59 5-1/2 - - HS-CT532 96.45 5-3/4 - - HS-CT548 106.03 6 - - HS-CT600 112.42

WIS CARBIDE TIPPED HOLE CUTTERS SPECIAL PURPOSE ST-23 3 FLAT SHANK Carbide Tipped Fractional and Metric Hole Cutters are designed for cutting steel plate, stainless steel, galvanized iron, fiberglass, aluminum, and copper up to 3/16 thick. Built-in safety stopper prevents over penetration. Ejector spring ejects slug to save production time. The center drill is a Titanium Nitride coated 135 split point drill. Used by electricians, plumbers, auto and truck repairmen, and general contractors. Outlasts hole saws 5 to 1. Fractional Sizes 9/16 to 4-1/2 Dia. SHANK DIA. PILOT DRILL 9/16 3/8 6mm CTHC036 $18.20 5/8 3/8 6mm CTHC040 20.80 3/4 3/8 6mm CTHC048 24.60 7/8 3/8 6mm CTHC056 26.80 1 3/8 6mm CTHC100 32.60 1-1/8 3/8 6mm CTHC108 37.80 1-1/4 3/8 6mm CTHC116 41.60 1-3/8 3/8 6mm CTHC124 45.60 1-1/2 3/8 6mm CTHC132 49.40 1-5/8 3/8 6mm CTHC140 53.20 1-3/4 3/8 6mm CTHC148 57.20 1-7/8 3/8 6mm CTHC156 62.40 2 3/8 6mm CTHC200 66.40 2-1/8 3/8 6mm CTHC208 70.20 2-1/4 3/8 6mm CTHC216 74.20 2-3/8 3/8 6mm CTHC224 78.00 2-1/2 1/2 6mm CTHC232 83.20 2-5/8 1/2 6mm CTHC240 87.00 2-3/4 1/2 6mm CTHC248 91.00 2-7/8 1/2 6mm CTHC256 95.00 3 1/2 6mm CTHC300 98.80 3-1/8 1/2 6mm CTHC308 102.60 3-1/4 1/2 6mm CTHC316 106.00 3-3/8 1/2 6mm CTHC324 111.80 3-1/2 1/2 6mm CTHC332 115.60 3-5/8 1/2 6mm CTHC340 119.60 3-3/4 1/2 6mm CTHC348 123.40 3-7/8 1/2 6mm CTHC356 127.40 4 1/2 6mm CTHC400 132.60 4-1/8 1/2 6mm CTHC408 137.00 4-1/4 1/2 6mm CTHC416 140.40 4-1/2 1/2 6mm CTHC432 148.20 SHANK DIA. CARBIDE TIPPED HOLE CUTTER SETS Metric Sizes 14mm to 114mm Dia. PILOT DRILL 14mm 10mm 6mm CTHCM014.0 $18.20 16mm 10mm 6mm CTHCM016.0 20.80 19mm 10mm 6mm CTHCM019.0 24.60 22mm 10mm 6mm CTHCM022.0 26.80 25mm 10mm 6mm CTHCM025.0 32.60 29mm 10mm 6mm CTHCM029.0 37.80 32mm 10mm 6mm CTHCM032.0 41.60 35mm 10mm 6mm CTHCM035.0 45.60 38mm 10mm 6mm CTHCM.38.0 49.40 41mm 10mm 6mm CTHCM041.0 53.20 44mm 10mm 6mm CTHCM044.0 57.20 48mm 10mm 6mm CTHCM048.0 62.40 51mm 10mm 6mm CTHCM051.0 66.40 54mm 10mm 6mm CTHCM054.0 70.20 57mm 10mm 6mm CTHCM057.0 74.20 60mm 10mm 6mm CTHCM060.0 78.00 64mm 13mm 6mm CTHCM064.0 83.20 67mm 13mm 6mm CTHCM067.0 87.00 70mm 13mm 6mm CTHCM070.0 91.00 73mm 13mm 6mm CTHCM073.0 95.00 76mm 13mm 6mm CTHCM076.0 98.80 79mm 13mm 6mm CTHCM079.0 102.60 83mm 13mm 6mm CTHCM083.0 106.00 86mm 13mm 6mm CTHCM086.0 111.80 89mm 13mm 6mm CTHCM089.0 115.60 92mm 13mm 6mm CTHCM092.0 119.60 95mm 13mm 6mm CTHCM095.0 123.40 98mm 13mm 6mm CTHCM098.0 127.40 102mm 13mm 6mm CTHCM102.0 132.60 105mm 13mm 6mm CTHCM105.0 137.00 108mm 13mm 6mm CTHCM108.0 140.40 114mm 13mm 6mm CTHCM114.0 148.20 DESCRIPTION Electrician s Carbide Tipped Hole Cutter HCS-CT-6E $352.00 1 each 7/8, 1-1/8, 1-3/8, 1-3/4, 2, 2-1/2 Packaged in a plastic case.