GENERAL TOOLS. 6.0 Pliers / Tweezers Tools Bolt cutters. 6.1 Hammers / Chisels / Centre punches / Scrapers & removers / Scissors & shears

0 Pliers / Tweezers Tools Bolt cutters Page 922 953 1 Haers / Chisels / Centre punches / Scrapers & removers / Scissors & shears Page 954 983 2 Bench shears Vices Screw clamps Page 984 995 3 Plumbing tools Page 99 9 4 Pumps/Oilers/Insulation stripping and crimping tools Cable reels/lamps Page 4 5 Voltage testers Knives/ Soldering equipment Page 47 4 Punching tools Marking equipment Pneumatic accessories Page 5 89 7 Woodworking and construction tools First aid Page 90 1 8 Riveters / Plugs Page 11 14 9 Chemical products Skin care Adhesives Page 15 1140 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 921

Professional pliers made of C0 tool steel Cutting edges induction hardened to 4 HRc Handles made of 2component plastic, secure grip, comfortable gripping zone with inner opening aid for fatiguefree work finely polished, matt chrome plated 0 800 C0 strong combination pliers particularly long cutting edge for flat and round cables for cutting soft and piano wires DIN ISO 574 eccentric joint (30% less effort) additional gripping surface underneath the joint 5 years warranty 0 800 0 800 320 320 0 803 C 0 side cutters with lap joint particularly highprecision cutting edge for cutting soft and piano wires DIN ISO 5749 5 years warranty 0 803 0 803 31 31 0 804 C0 strong side cutters with optimised force transfer through joint tappet particularly highprecision cutting edge for cutting soft and piano wires DIN ISO 5749 5 years warranty 180 0 804 318 0 804 318 Pliers / Tweezers / ESD tools / Bolt cutters 0 807 C0 long nose pliers particularly highprecision cutting edge for cutting soft and piano wires DIN ISO 5749 320: straight 322: 45 bent nose 0 807 320 322 5 years warranty 0 807 320 0 807 322 922 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

0 Combination pliers with extra long, additionally induction hardened cutting edge for mediumhard wire, hard, serrated jaw gripper surfaces made of special tool steel, : 11 Head polished, with red PVC dipped handles 41 420 chrome plated, handles with thick multicomponent sheathing 0 polished 0 chrome plated 5 years warranty 0 11 180 11 118 41 418 420 0 41 420 0 008 Combination pliers handy shape, for cutting hard and soft wire, heavyduty, cutting edges with additional induction hardening, made of special tool steel, oil hardened (0 HRC) : 114 Head polished, handles with plastic coating 21 220 Head polished, handles with twocoloured multicomponent sheathing 314 320 Head chrome plated, handles with twocoloured multicomponent sheathing 0 008 114 0 008 21 220 0 008 polished 0 008 polished 0 008 chrome plated 140 180 114 11 118 21 218 220 31 318 320 0 008 31 320 0 00 Strong combination pliers with high mechanical advantage for the toughest continuous stress, cuts all wires (including piano wire), cutting edges additionally induction hardened (approx 4 HRc), made of special grade tool steel, oil hardened : 118 122 Head polished, handles coated with plastic 318 322 Head polished, handles with twocoloured multicomponent sheathing 418 422 Head chrome plated, handles with twocoloured multicomponent sheathing 0 00 118 122 0 00 318 322 180 225 1 0 00 polished 118 122 1 0 00 polished 318 320 322 0 021 Small combination pliers fully functional pliers for professionals and DIY enthusiasts, oil hardened, with cutting edges for hard and soft wire Cutting edges additionally induction hardened, handles with multicomponent sheathing 0 021 0 00 chrome plated 418 420 422 0 00 418 422 0 021 1 Pliers / Tweezers / ESD tools / Bolt cutters Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 923

0 034 Water pump pliers DIN ISO 5231 D, with handy, profiled handles, box slip joint, 7 position adjustable jaws, made of chrome vanadium steel : painted red, jaw and frame polished 5 years warranty 0 034 117 0 034 124 0 034 Jaw capacity 0 034 130 175 240 300 117 124 130 30 35 40 0 03 Water pump pliers DIN ISO 897, with knurled, practical handles, adjustable box slip joint and limit stop, particularly powerful mounting due to forged on collar, Material: Chrome vanadium steel : painted red, jaw and frame polished 0 03 Jaw capacity 0 03 115 1 240 300 115 124 130 18 30 40 0 039 Alligator water pump pliers DIN 897, selflocking on pipes and nuts no slipping, with box slip joint, 7 position adjustable gripping jaws with special hardened teeth approx 1 HRc, with antipinch protection, material: Chrome vanadium electric steel, oil hardened, type: 118 130 Head polished, handles with plastic coating 225 chrome plated, handles with plastic coating 325 330 chrome plated, handles with multicomponent sheathing 0 039 Jaw capacity 0 039 125 Pliers / Tweezers / ESD tools / Bolt cutters 180 2 300 2 2 300 2 330 118 125 130 225 325 330 0 040 125 133 30 3 4 3 3 4 0 040 Speedy water pump pliers additional inductive tempering of the teeth permanently sharp springdriven sliding block automatic engagement Adjustment without pushbutton no changeover drop forged tough optimised jaw design selflocking Quick snap ratchet principle quick infeed or 12 position latch fine graduation handle always in optimum position improved ergonomics antipinch protection safe box joint reliable Jaw capacity 38 48 5 years warranty Adjustment without pushbutton no changeover 0 039 325 0 040 125 0 040 133 924 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

0 042 Cobra water pump pliers with box joint, fast and precise fitting adjustment at the press of a button directly at the workpiece, no inadvertent adjustment, with 1114 position fine adjustment, antipinch protection prevents injuries, gripping surfaces with special hardened teeth (1 HRC), material: Chrome vanadium electric steel, oil hardened : 115 130 Head polished, handles with plastic coating 218 230 chrome plated, handles with plastic coating 325 330 chrome plated, handles with twocoloured multicomponent sheathing 0 042 115 0 042 118 1 180 2 300 180 2 300 2 300 0 042 115 118 125 130 218 225 230 325 330 Jaw capacity 30 30 3 4 30 3 4 3 4 0 042 130 0 042 225 0 042 325 + 330 0 041 Cobra ES water pump pliers as 0 042 In addition, especially slender design: The extra slim water pump pliers particularly good access to the workpiece due to the very slender design in the whole head and joint area ideal for service and maintenance, equipment repair, automobile sector and industry : Head polished, handles covered with slipresistant plastic 0 041 125 0 041 Jaw capacity 2 125 42 0 043 Pipe wrenches and water pump pliers Cobra XL/XXL Pipe wrench and water pump pliers in one tool Selflocking on pipes and nuts, no slipping on the workpiece and less effort to use New jaw geometry: optimised for pipes and threaded connection Replaces three pipe wrenches: Stype, 45, 90 Fast, precisefitting adjustment directly at the workpiece No inadvertent shifting Nonslip joint Fine adjustment Optimum lever action In many situations can be used as a spanner Gripping surfaces with special hardened teeth, hardness of the teeth approx 1 HRc: Secure gripping due to high wearresistance Chrome vanadium electric steel, oil hardened and tempered 400 0 043 140 15 Advantages: 140 Jaw capacity for pipes up to 3 1 /2 and length of a 1 1 /2 pipe wrench 20% less weight than 1 1 /2 pipe wrench 27 adjustment positions 15 Jaw capacity for pipes up to 4 1 /2 and length of 2 pipe wrench 40% less weight than comparable pipe wrenches up to pipe external Ø 3 1/2 4 1/2 Jaw capacity 0 043 15 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 95 400 0 043 140 Pliers / Tweezers / ESD tools / Bolt cutters 925

Pliers / Tweezers / ESD tools / Bolt cutters 0 049 SmartGrip water pump pliers The water pump pliers with automatic adjustment (patented) Automatic adjustment at the workpiece through simple pressing together of the pliers handles Onehand operation for left and righthanded persons Locking lever enables spacesaving transport with safe, securely closed handles Fine adjustment ensures favourable position of the pliers handles at all times Good access to the workpiece due to slender design Capacity: for nuts: AF 3 for pipes: Ø 1/8 1 1/4 Box joint: High stability due to double guide and reliable latching of the joint bolt Selflocking on pipes and nuts: Gripping surfaces with special hardened teeth, hardness of the teeth approx 1 HRC Favourable lever action Pinchprotection prevents injuries Chrome vanadium electric steel, forged, oil hardened and tempered : Head polished, handles covered with slipresistant plastic 2 2 2 125 2 2 2 0 049 125 025 125 225 325 0 052 025 125 Capacity for pipes Inch 1 1/4 0 052 Water pump pliers with grooved joint Drop forged from special highquality tool steels Individually tempered using highfrequency induction hardening method Cutting edges with additional induction hardening Corrosionproofed by electroplated coating Elastic gripping zones and hard core : 025 chrome plated, handles with twocoloured multicomponent sheathing 125 Head polished, handles with plastic coating 0 044 Water pump pliers DIN 897, with grooved joint, easy, smooth latching due to milled rotary swivel, in five different positions, absolutely secure fit of the the two parts of the pliers in any latched position, no slipping of the joint, antipinch protection prevents injuries, made of chrome vanadium electric steel, oil hardened : + 125 Head polished, handles with plastic coating 025 + 225 chrome plated, handles with plastic coating 325 Head chrome plated, handles with twocoloured multicomponent sheathing 0 044 Jaw capacity 14 30 3 3 3 Capacity for nuts 3 Jaw capacity 3 3 5 years warranty Adjustment by simply pressing together the handles 0 049 125 0 052 025 0 052 125 0 044 025 0 044 + 125 0 044 225 0 044 325 92 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

0 00 Universal mole grips with forged, halfround serrated gripping jaws and wire cutter, with quick release lever Material: Chrome vanadium steel, bright nickel plated Uses: round and flat material 1 125 180 2 300 0 00 1 112 118 125 130 5 years warranty Capacity 30 32 35 5 0 00 0 01 Mole grips with Vjaws Upper jaw with lengthwise grooves, lower jaw with Vcut surface Material: Chrome vanadium steel, nickel plated Uses: round and flat material 5 years warranty 0 01 0 01 Capacity 180 2 27 32 0 02 Parallel mole grips with movable bottom jaw, enables parallel pressure on the whole jaw surface at all opening widths, forged jaws, with quick release lever Material: Chrome vanadium steel, bright nickel plated Uses: round and flat material 5 years warranty 0 02 125 2 0 02 125 Capacity 45 with movable jaw 0 04 Ideal mole grips with forged, universal doublev gripping jaws, with quick release lever, Material: Chrome vanadium steel, bright nickel plated Uses: round, profiled and angular material 5 years warranty 0 04 0 04 Capacity 180 2 118 125 45 45 0 0 Longnose selfgrip pliers with integrated steel cutter, bright nickel plated, suitable for places difficult to access and very small workpieces 5 years warranty 130 1 230 0 0 113 115 123 0 08 Selfgrip welding clamp Ushaped gripping jaws, top with 90 angle, for all welding work on profiled or flat material Material: Chrome vanadium steel, bright nickel plated, clamps workpieces with easily controllable pressure 280 0 08 128 Jaw thickness at the tips 2 3 5 Capacity 48 57 7 5 years warranty Capacity 55 0 0 0 08 128 Pliers / Tweezers / ESD tools / Bolt cutters Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 927

0 070 Wtype pipe weld pliers Top Vshaped bent gripping jaw for clamping with threepoint support, for centring and gripping tubular parts Material: Chrome vanadium steel, bright nickel plated 280 0 070 128 Capacity 90 5 years warranty 0 070 128 0 072 Selfgrip sheet metal clamp with particularly wide (80 ), flat gripping jaws, with quick release lever, Material: Chrome vanadium steel, nickel plated Particularly suitable for bending sheet metal 5 years warranty 0 072 118 0 072 Capacity 180 118 45 0 074 selfgrip C clamp grasps bulky workpieces with movable clamping jaws Material: Chrome vanadium steel, bright nickel plated 5 years warranty 0 074 0 074 Capacity 1 280 40 115 128 14 54 75 225 0 075 Selfgrip chain wrench clamps workpieces of different shapes and sizes, can also be used as a ratchet in both directions 5 years warranty 225 0 075 Clamping Ø 1 0 075 0 07 Universal mole grips/ locking bar pliers with parallel clamping surfaces and V recess for smaller round parts 0 07 1 Capacity 0 07 Reach Pliers / Tweezers / ESD tools / Bolt cutters 1 0 080 Tapered vehicle pliers for very narrow screw fittings special tool steel, hardened and tempered in oil Plastic coated handles 0 080 5 5 Head shape straight 20 angled head 0 080 0 080 928 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

0 3 Flatnosed pliers with long, flat jaws, material: Tool steel : 11 Head polished, with red PVC dipped handles 41 chrome plated, handles with thick, multicomponent sheathing 5 years warranty 0 3 11 0 3 11 0 3 chrome plated 41 0 3 41 0 Flatnosed pliers DIN 5745, short, flat jaws, gripping surfaces serrated, Material: Special tool steel, oil hardened : 112 118 Head polished, handles with plastic coating 314 31 Head chrome plated, handles with twocoloured multicomponent sheathing 0 112 118 0 0 chrome plated Jaws length 0 314 + 31 125 140 180 112 114 11 118 314 31 27 28 30 35 0 112 Roundnosed pliers with long, round jaws, material: Special tool steel : 11 Head polished, with red PVC dipped handles 41 chrome plated, handles with thick multicomponent sheathing 5 years warranty 0 112 11 0 112 11 0 112 chrome plated 41 0 112 41 0 114 Roundnosed pliers DIN 5745, with short, round jaws, precision ground, for prebending wire eyelets, material: Special tool steel, oil hardened : 112 11 Head polished, handles with plastic coating 314 31 Head chrome plated, handles with twocoloured multicomponent sheathing 125 140 0 114 112 114 11 0 114 chrome plated 314 31 Jaw length 27 28 30 0 114 112 11 0 114 314 + 31 Pliers / Tweezers / ESD tools / Bolt cutters Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 929

0 115 Duckbill pliers 90 wide jaws, tapering to 15 thick Smooth gripping surfaces Chrome vanadium electric steel, hardened in oil and tempered Polished head : Plastic coated handles 0 115 01 0 115 01 0 117 Jewellers pliers for fine wire and silver jewellery work suitable for bending and cutting work, eg in electronics fine, tapering, round jaws, precision ground Cutting edges with additional induction hardening, cutting edge hardness approx 0 HRC Vanadium steel, oil hardened and tempered : Head chrome plated, handles with plastic coating 0 117 Jaws length 0 117 113 130 113 32 0 122 Long flat nosed pliers DIN 5745, with flat, wide jaws, material: Chrome vanadium electric steel, oil hardened : 114 119 Head polished, handles with plastic coating 314 319 Head chrome plated, handles with twocoloured multicomponent sheathing 0 122 114 119 0 122 0 122 chrome plated Jaws length 0 122 314 319 140 190 114 11 119 314 31 319 42 45 Pliers / Tweezers / ESD tools / Bolt cutters 0 132 Long flat, round nosed pliers DIN 5745, with flat, round jaws, material: Chrome vanadium electric steel, oil hardened : 114 119 Head polished, handles with plastic coating 314 319 Head chrome plated, handles with twocoloured multicomponent sheathing 140 190 0 132 114 11 119 0 132 chrome plated 314 31 319 Jaws length 42 0 132 114 119 0 132 314 319 930 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

0 142 Long round nosed pliers DIN 5745, with long, round jaws, gripping surfaces clean and smooth ground, material: Chrome vanadium electric steel, oil hardened, : 114 11 Head polished, handles with plastic coating 314 31 Head chrome plated, handles with twocoloured multicomponent sheathing 0 142 114 + 11 140 0 142 polished 114 11 0 142 chrome plated 314 31 Jaws length 375 41 0 142 314 + 31 0 144 Flat nosed assembly pliers especially suitable for gripping, adjusting and assembly work with higher gripping force Serrated gripping surfaces special tool steel, hardened and tempered in oil Polished head Plastic coated handles : Flat, wide jaws 0 144 : Flat round jaws 0 144 Jaw shape flat wide flat round 0 144 0 1 Radio pliers (flat round pliers) with cutting edge for mediumhard wire, induction hardened cutting edges, made of special steel : 11 Head polished, with red PVC dipped handles 41 422 chrome plated, handles with thick multicomponent sheathing + 422 with 45 curved jaws 5 years warranty DIN ISO 5745 0 1 11 0 1 41 0 1 polished 11 140 0 1 chrome plated 41 420 422 0 1 140 0 1 Jaws length 0 85 80 0 1 420 0 1 422 Pliers / Tweezers / ESD tools / Bolt cutters Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 931

0 152 Radio pliers (flat round pliers) DIN 5745, with cutting edge for hard and soft wire and flat, round jaws, gripping surfaces serrated, material: Special tool steel, oil hardened : 114 11 Head polished, handles with plastic coating 314 31 Head chrome plated, handles with twocoloured multicomponent sheathing 41 as above, in addition with curved jaws 0 152 114 + 11 0 152 41 0 152 314 + 31 140 0 152 114 11 0 152 chrome plated 314 31 41 Jaws length 42 0 15 Multipurpose pliers can be universally used as radio or telephone pliers, pinch or crimping pliers for wire end ferrules, for wire cutting and for insulation stripping 35 degree curved nose for difficult to access places with chequered tip for gripping and bending induction hardened cutting edge Insulation stripping function for cables from 05 25 Crimp function for wire end ferrules from 05 25 Jaw recess for holding small hexagon head screws Additional drillholes for reliable guiding of different screws and nails 5 years warranty 0 15 41 0 15 41 0 12 Radio (telephone) pliers for grasping and cutting individual conductors in cable harnesses, with centre cutters for soft wire and flat, round jaws, Material: Chrome vanadium electric steel, oil hardened : Head polished, handles with plastic coating Pliers / Tweezers / ESD tools / Bolt cutters 0 12 11 0 12 11 932 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

0 170 Long nosed pliers DIN 5745, with cutting edge for hard and soft wire and flat, round jaws, serrated gripping surfaces, material: Chrome vanadium electric steel, oil hardened : Head polished, handles with plastic coating 220 Polished head, with twocoloured multicomponent handle sheathing 320 Head chrome plated, handles with twocoloured multicomponent sheathing 0 170 0 178 0 170 polished 220 0 178 Long bentnosed pliers DIN 5745, with cutting edge for hard and soft wire and flat, round, 40 bent jaws, serrated gripping surfaces, material: Vanadium steel, oil hardened : Head polished, handles with plastic coating 220 Polished head, handles with twocoloured multicomponent sheathing 320 Head chrome plated, handles with twocoloured multicomponent sheathing 0 178 polished 0 990 Pliers set 3piece in case with induction hardened cutting edges Chrome plated heads Handles with thick multicomponent sheathing 220 0 170 chrome plated 320 Jaws with 40 bent nose 0 178 chrome plated Side cutters Combination pliers 180 Radio (telephone) pliers 320 0 990 5 years warranty Jaws length 73 Jaws length 73 0 170 0 170 220 0 170 320 0 178 0 178 220 0 178 320 0 990 Pliers / Tweezers / ESD tools / Bolt cutters Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 933

Pliers / Tweezers / ESD tools / Bolt cutters 0 188 Precision engineering pliers smooth gripping surfaces, precision ground tips, for adjusting components and wire connections and bending in wire eyelets, Material: Chrome vanadium electric steel, oil hardened : Head polished, plastic coated handles 125 125 125 125 190 190 0 188 121 122 123 124 0 190 Mechanic s pliers Material: Vanadium electric steel, oil hardened 121 122 124 125 321 322 323 324 32 401 Jaws length : 121 125 Head polished, plastic coated handles 321 324 Head chrome plated, handles with twocoloured multicomponent sheathing 32 Spark plug connector pulling pliers, polished head, plastic coated handles 401 as 32, but with multicomponent sheathing handles 0 19 Relay adjusting pliers DIN 5235, for gripping components and wires with very small diameters as well as for bending contact and relay springs, polished gripping surfaces, edges carefully deburred, Material: Chrome vanadium electric steel : Polished jaws, plastic coated handles 135 135 135 Shaft Ø 0 190 0 19 131 132 133 0 202 1 27 27 27 27 Jaws length 73 73 73 73 73 73 73 73 Jaws length 0 202 Circlip pliers set for internal and external rings, with four interchangeable jaw sets, 2 straight sets, 1 45 bent set, 1 90 bent set, type: painted black, handles with red PVC sheathing 34 34 32 Jaw type flat wide flat pointed flat round round straight, flat round curved, flat round flat wide cranked, flat round straight, flat round curved, flat round cranked, flat pointed flat wide angled, flat round angled, flat round Jaw type Jaw type flat pointed flat wide 40 bent with interchangeable jaw inserts 121 122 123 124 0 190 125 0 190 321 0 190 322 0 190 324 0 190 32 ideal for spark plugs too 0 190 401 131 132 133 0 202 1 934 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

0 204 Circlip pliers for internal rings DIN 525 C, straight type Material: Chrome vanadium steel/ Chrome vanadium electric steel, oil hardened and tempered : polished, plastic coated handles 5 years warranty 0 204 000 004 0 204 900 904 Size J 0 J 1 J 2 J 3 J 4 0 204 000 004 140 140 180 220 320 Bore Ø 8 25 25 19 0 40 85 15 0 204 900 901 902 903 904 140 140 180 225 320 Bore Ø 8 13 12 25 19 0 40 85 140 0 2 Circlip pliers for internal rings DIN 525 D, 90 bent nose Material: Chrome vanadium steel/ Chrome vanadium electric steel, oil hardened and tempered : polished, plastic coated handles 5 years warranty 0 2 000 004 0 2 900 904 Size J 01 J 11 J 21 J 31 J 41 0 2 000 004 130 130 170 215 300 Bore Ø 8 25 25 19 0 40 85 15 0 2 900 901 902 903 904 130 130 170 215 300 Bore Ø 8 13 12 25 19 0 40 85 140 0 214 Circlip pliers for external rings DIN 5254 A, straight type Material: Chrome vanadium steel/ Chrome vanadium electric steel, oil hardened and tempered : polished, plastic coated handles 5 years warranty 0 214 005 0 214 901 905 Size A 0 A 1 A 2 A 3 A 4 Size A 01 A 11 A 21 A 31 A 41 0 214 004 005 0 218 004 005 140 140 180 2 320 0 218 Circlip pliers for external rings DIN 5254 B, 90 bent nose Material: Chrome vanadium steel/ Chrome vanadium electric steel, oil hardened and tempered : polished, plastic coated handles 130 130 170 2 3 Shaft Ø 3 25 19 0 40 85 15 Shaft Ø 3 25 19 0 40 85 15 0 214 0 218 3 25 19 0 40 85 140 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 901 902 903 904 905 901 902 903 904 905 5 years warranty 140 140 180 2 320 125 125 170 300 Shaft Ø 3 25 19 0 40 85 140 0 218 005 0 218 901 905 Shaft Ø Pliers / Tweezers / ESD tools / Bolt cutters 935

0 222 Long circlip pliers for internal rings black powder coated, zinced tips and safety catch, end of safety catch handle is plastic dip insulated 0 224 Replacement tips for circlip pliers No 0 222 (per pair) 0 222 Tips 0 222 0 224 Bore Ø Tip Ø 0 224 570 570 straight straight angled Tips 125 300 252 0 125 300 35 45 35 0 224 0 230 Long circlip pliers for external rings black powder coated, zinced tips and safety catch, end of safety catch handle is plastic dip insulated 0 232 Replacement tips for circlip pliers No 0 230 (per pair) 0 230 Tips 0 230 0 232 Shaft Ø Tip Ø 570 570 straight straight angled Tips 125 300 252 0 125 300 35 45 35 0 232 0 232 0 234 Snap ring pliers for installing snap rings, zero backlash joint, plastic coated handles, black finish head 0 234 Snap ring ab Ø 12 0 234 0 238 Grip ring pliers for installing grip rings, zero backlash joint, plastic coated handles, polished head, 140 long Pliers / Tweezers / ESD tools / Bolt cutters Size G 0 G 1 G 2 0 238 000 Shaft Ø 15 4 4 7 5 13 0 238 93 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

The circlip pliers satisfy the highest requirements Positive, closefitting inserted and pressed tips made of highdensity spring steel achieve up to times longer tool lives compared to conventional circlip pliers as well as a high degree of stability when releasing stuck rings The large contact surfaces and position of the tips enable torsionfree installation, making it difficult for the ring to fly out The opening spring is positioned, protected, in the screwed precision joint 0 2 Precision circlip ring pliers for internal rings (drillholes) for installing circlips in drillholes within the range of Ø 8 140 Inserted tips made of highest grade, drawn spring steel wire Heavy duty in continuous use, up to times longer tool life Precise, smooth and easy running screwed joint Forged Large contact surfaces at the tips: No ring twist, easy to install Slender pliers head for optimum access to the workpiece Handles coated with slipresistant plastic Chrome vanadium electric steel Head: grey atramentised 0 to 014: DIN 525 C (straight tips) 1 to 114: DIN 525 D (angled tips) 0 2 0 014 0 2 1 114 Size 0 2 0 2 For bore Ø J0 J1 J2 J3 J4 straight 0 011 012 013 014 140 140 180 225 320 angled 1 111 112 113 114 130 130 15 2 305 8 13 12 25 19 0 40 85 140 0 254 Precision circlip ring pliers for external rings (shafts) For the installation of circlips on shafts within the range from Ø 3 140 Inserted tips made of highest grade, drawn spring steel wire Heavy duty in continuous use, up to times longer tool life Precise, smooth and easy running screwed joint forged Large contact surfaces at the tips: No ring twist, easy to install Slender pliers head for optimum access to the workpiece Opening springs in joint are protected and captive Handles coated with slipresistant plastic Chrome vanadium electric steel 0 to 014: DIN 525 A (straight tips) 1 to 114: DIN 5254 B (angled tips) Size A0 A1 A2 A3 A4 0 254 straight 0 011 012 013 014 140 140 180 225 320 0 254 angled 1 111 112 113 114 130 130 15 2 305 For bore Ø 3 25 19 0 40 85 140 0 254 0 014 0 254 1 114 Pliers / Tweezers / ESD tools / Bolt cutters Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 937

0 302 Electronics pliers DIN ISO 955 with high side stability, smooth ground gripping surfaces, edges carefully deburred, precision tips for extremely fine electronics and precision engineering installation work, with captive, frictionfree double spring, material: Special tool steel, oil hardened, : Ground, from 112 mirror polished, handles coated with soft PVC 211 218 polished, with multicomponent sheathing handles 0 302 111 113 0 302 0 302 115 111 211 115 112 212 115 113 213 115 215 145 217 145 218 Jaw type flat round round tip 45 angled, flat round 45 angled, flat round, long flat round, long Jaws length 225 225 225 400 400 400 0 302 211 213 0 302 218 0 304 Precision electronics pliers The range for the highest performance and results standards Precision pliers for extremely intricate installation work, eg in electronics and precision engineering For gripping, holding and bending Screwed joint: Precise, zerobacklash movement of the pliers Precisely made joint surfaces for uniform, lowfriction movement Lowfriction double spring for gentle and uniform opening Smoothly ground gripping surfaces; edges carefully deburred Nonreflective finish Low weight Ergonomic, two coloured, multicomponent sheathed handles; blue/grey Forged from chrome vanadium ball bearing steel of the highest grade made of ball bearing steel for the highest standards 0 304 0 304 135 135 135 0 304 005 Jaw type flat wide flat round round tip Jaws length 19 19 21 0 304 005 0 30 Electronics side cutters DIN ISO 954 with box joint and captive, low friction double spring, cutting edges with additional induction hardening, Material: Special tool steel, oil hardened : 1 113 Head polished, plastic coated handles 2 240 Mirror polished head, handles with twocoloured multicomponent sheathing 0 30 222 Pliers / Tweezers / ESD tools / Bolt cutters 115 130 115 130 115 115 115 115 115 0 30 1 111 112 113 2 222 225 230 240 round with bevel round with bevel pointed without bevel round without bevel round with small bevel round without bevel round with small bevel pointed without bevel round with small bevel 0 308 Electronics side cutters as Prod No 0 30 1; however, with additional wire clamp, no uncontrolled flying out of the wire section, no faults in the circuit : 111 Polished head, plastic coated handles 211 Mirror polished head, handles with twocoloured multicomponent sheathing 115 115 0 308 111 211 Head/cutting edge type Cutting capacities soft wire Ø 03 1 03 1 Cutting capacities Cu wire Ø 03 1 03 20 03 13 03 1 03 1 03 13 03 13 03 13 03 08 Cutting capacities mediumhard wire Ø 03 12 03 12 0 308 111 0 30 225 0 30 230 0 30 240 with additional wire clamps 0 308 211 938 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

0 3 Precision side cutters Precision pliers for extremely intricate cutting work, eg in electronics and precision engineering Precisely ground, sharp cutting edges for exact cuts Cutting edges with additional induction hardening, cutting edge hardness approx 4 HRc Screwed joint: Precise, zerobacklash movement of the pliers Precisely made joint surfaces for uniform, lowfriction movement within the whole opening area Lowfriction double spring for gentle and uniform opening Nonreflective finish Low weight Ergonomic, two coloured, multicomponent sheathed handles; blue/grey Forged from chrome vanadium ball bearing steel of the highest grade made of ball bearing steel for the highest standards 0 3 0 3 007 0 3 011 125 125 125 125 0 3 005 007 009 011 013 Head/cutting edge type round with fine bevel round without bevel pointed with fine bevel pointed without bevel minihead with fine bevel minihead without bevel Cutting capacities soft wire Ø 15 12 13 08 Cutting capacities mediumhard wire Ø 08 05 07 055 055 04 Cutting capacities hard wire Ø 05 04 03 0 312 Super Knips electronics side cutters DIN ISO 954 with precisely shaped tip, ground cutting edge without bevel for level cutting, zero backlash joint with stainless steel rivet, with spring and restricted opening, extremely smooth and easy movement, for soft wire, material: made of stainless steel, : 125 : Handles with twocoloured multicomponent sheathing 1 Cutting edge type without wire clamp with wire clamp with 0 angled tips with particularly narrow tips with narrow tips and wire clamp 0 312 1 111 112 113 114 Cutting capacities soft wire Ø 02 1 02 1 02 1 02 1 02 1 111 112 113 114 0 31 Super Knips electronics side cutters DIN ISO 954 with precisely shaped tip, ground cutting edge without bevel for level cutting, zero backlash joint with stainless steel rivet, with spring and restricted opening, extremely smooth and easy movement, for hard and soft wire, also suitable for glass fibre cables, Material: Special tool steel : Nonreflective, black finish head, handles with twocoloured multicomponent sheathing 0 31 111 125 125 0 31 111 112 0 318 Wire clamp no yes 0 318 Electronic end cutters Precision pliers for the finest cutting work, with zero backlash, box joint and captive, frictionfree double spring, the mirror polish in conjunction with a fine oil film provides good protection against rust no faults in the circuit due to flaking chrome, Material: Special tool steel, oil hardened and tempered : Mirror polished head, handles with twocoloured multicomponent sheathing Cutting edge type Cutting capacities mediumhard wire max Ø 12 12 Cutting capacities soft wire Ø Cutting capacities hard wire N 2 max Ø 115 211 with small bevel 20 08 115 212 without bevel 13 115 213 with bevel 20 115 214 with small bevel 08 0 318 214 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 0 0 Cutting capacities mediumhard wire Ø 0 31 112 0 318 211 0 318 212 0 318 213 Pliers / Tweezers / ESD tools / Bolt cutters 939

ESD When using pliers on components at risk from electronic discharge (ESDS electro static discharge sensitive devices), the relevant standards and regulations (eg IEC TR 13405, DIN EN 13405, SP Method 2472) require controlled discharge of electrical charges through the handles of such pliers! Knowledge of ergonomic conditions for gripping and cutting pliers has been utilised in the KNIPEX electronic pliers: comfortable, userfriendly working Precision pliers for extremely precise installation work, eg electronics and precision engineering For gripping, holding, bending Electrically discharging, dissipative design Precision box joint Smooth ground gripping surfaces Edges carefully deburred Lowfriction double spring for gentle and uniform opening The mirror polish in conjunction with a fine oil film provides good protection against rust no faults in the circuit due to flaking chrome Handles with twocoloured multicomponent sheathing (black/grey) Special tool steel, oil hardened and tempered 0 342 ESD electronics pliers with flat, wide jaws 0 342 0 342 Jaws length Jaws tip 115 225 20 x 40 flat, wide 115 008 225 20 x round, tip 115 012 225 20 x 15 45 angled, flat round 0 342 008 0 342 012 0 34 ESD electronics end cutters with extra hard cutting edges, min 5 HRC Pliers / Tweezers / ESD tools / Bolt cutters 0 34 Jaws length Cutting capacities soft hard 115 0 20 05 End cutters, small bevel 008 15 05 Oblique end cutters, short, small bevel, a = 15 012 185 0 Oblique end cutters, Mini, small bevel, a = 5 0 3 ESD electronics side cutters Cutting edges with additional induction hardening, cutting edge hardness approx 2 HRC (in 020 57 HRC) 0 3 Jaws length Cutting capacities soft hard 115 0 140 0,3 1 05 round with small bevel 115 020 140 03 13 round without bevel 115 025 140 03 13 05 pointed with small bevel 115 0 5 03 08 pointed, Mini, with small bevel 0 34 0 34 008 0 34 012 0 3 0 0 3 020 0 3 025 0 3 0 940 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

Electronics screwdrivers The ESD screwdrivers have the tried and tested, ergonomic Wiha SoftFinish multicomponent handle with rolloff protection Electrostatically discharging (dissipative), surface resistance to 9 ohm Round blade, highquality chrome vanadium molybdenum steel, hardened thoughout, matt chromeplated ChromeTop blade tip ensures maximum dimensional accuracy DIN EN 134051/134052 ESD screwdrivers are noninsulating and are therefore not suitable for working on live parts! 0 380 ESD screwdrivers for plain slotted screws, with SoftFinish handle Blade width 0 380 Blade length 0 380 25 30 40 55 5 025 030 040 055 05 75 125 1 179 204 211 23 28 0 382 ESD screwdrivers for Phillips recess screws, with SoftFinish handle Size 0 382 Blade length 0 382 PH 0 PH 1 PH 2 0 80 14 191 218 0 384 ESD screwdrivers for Pozidrive screws, with SoftFinish handle Size PZ 0 PZ 1 0 384 Blade length 0 80 14 191 0 384 0 38 ESD screwdrivers for Torx screws, with SoftFinish handle Size T 4 T 5 T T 8 T 9 T T 15 T 20 0 38 004 005 00 008 009 0 015 020 Blade length 0 0 0 0 0 80 80 14 14 14 14 171 191 191 218 0 38 Pliers / Tweezers / ESD tools / Bolt cutters Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 941

0 388 ESD screwdriver sets 5 pce, with SoftFinish handles Blade type 0 388 Size Blade length Plain slotted screws Phillips recess screws Torx screws 005 015 3 / 4 PH 0 / 1 / 2 TZ /8/9//15 0 388 0 392 ESD precision screwdrivers for plain slotted screws, with rotating cap 0 392 Blade width 0 392 Blade length 15 20 25 30 35 40 015 020 025 030 035 040 40 40 0 0 145 145 170 170 0 394 ESD precision screwdrivers for Phillips recess screws, with rotating cap Size 0 394 Blade length 0 394 PH 00 PH 0 PH 1 1 2 40 0 145 170 Pliers / Tweezers / ESD tools / Bolt cutters 0 39 ESD precision screwdrivers for Torx screws, with rotating cap Size T 3 T 4 T 5 T T 7 T 8 T 9 T T 15 0 39 3 4 5 7 8 9 1 115 Blade length 40 40 40 40 40 40 0 145 145 170 0 39 942 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

Ceramic adjustment tools A combination of ceramic blades and antistatic handles, no electromagnetic induction at highfrequencies, no eddy current losses, electrically insulating, nonmagnetic, antistatic, wear resistance approx times better than metal and approx times better than plastic, blades heat resistant up to 0 C, low thermal conductivity, rustproof, resistant against alkalis and acids (except hydrofluoric acid), extremely smooth antiadhesion surface, contamination free blades are therefore suitable for clean rooms! 0 398 Ceramic adjustment screwdrivers for plain slotted screws, with rotating cap Blade width 0 398 Blade length 0 398 09 13 18 2 9 113 118 12 15 15 15 15 945 945 945 945 0 399 Ceramic adjustment screwdrivers for Phillips recess screws, with rotating cap 0 399 Size 0 399 Blade length 0 15 945 With centring head and quickrotation zone for optimum handling Blade and handle are completely antimagnetic and antistatic Blade made of zirconium ceramic Pliers / Tweezers / ESD tools / Bolt cutters Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 943

0 408 Tweezers for general use, rounded tips, jaws with milled teeth 145 145 145 145 0 408 1 2 201 202 203 fine teeth polished nickel plated fine teeth polished nickel plated fine teeth polished nickel plated fine teeth, sheathed up to the tip fine teeth, sheathed up to the tip fine grooves, rustproof antimagnetic fine grooves, rustproof antimagnetic fine grooves Teflon coated 1 2 201 202 203 0 4 Tweezers antimagnetic made of titanium, for precision and highprecision installation & assembly work, extremely hard, with no sharp edges 112 5 0 4 112 130 nonreflective matt extremely hard 130 0 412 Tweezers for general use, pointed, made of spring steel strip, hardened 1 0 412 2 112 127 127 1 2 hollow pointed, polished polished stainless, antimagnetic 0 41 Jewellers tweezers hardened, with fine tips Pliers / Tweezers / ESD tools / Bolt cutters 5 5 0 41 1 2 0 422 Tweezers College model, with curved, finely toothed tips, plucking part hardened 1 1 1 0 422 1 201 polished stainless, antimagnetic polished stainless, antimagnetic stainless, antimagnetic polished nickel plated polished nickel plated polish nickel plated and Teflon coated 1 2 1 201 944 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

0 42 Pointed tweezers straight, with finely cut tips 155 155 0 42 1 polished nickel plated hardened polished nickel plated, hardened, plastic coated 1 0 428 Tweezers straight, with finely cut tips 0 428 0 428 130 polished nickel plated 0 434 Cross action tweezers 0 434 0 434 155 polished nickel plated 0 438 Coated wire stripping tweezers made of black finish spring steel, with precisely milled blades 130 0 438 0 472 Electronics tweezers For positioning chip capacitors with flat base, gripping angle 0 For wire thicknesses 0 0 438 0 472 0 472 115 antimagnetic, acid proof steel, stainless 0 478 Illuminated tweezers Uses: Wherever visibility or light conditions are limited A white light shines towards both ends of the tweezers, this gives the tweezers holder a clear view LED fixed between the tweezer jaws The integrated diode does not light up until the tweezer jaws are pressed together 2 flattype batteries (supplied with the tweezers) ensure approx 0 switching cycles For replacement batteries, see Product Number 4 8 0 478 0 478 140 0 2 Engineers mirror chrome plated, flexible guide tube, with plastic handle, plane mirror Mirror size x 70 2 0 2 0 8 Flexible, hinged mirror with metal handle and hand guard, mirror adjustable on all sides due to ball joint, mirror housing made of stainless steel 0 8 stainless steel 420 Mirror Ø 30 0 2 0 8 Pliers / Tweezers / ESD tools / Bolt cutters Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 945

0 5 Plastic repair mirror for all work on electronic equipment, plastic handle made of plugtogether parts / 285 0 5 Mirror Ø 23 0 5 0 512 Repair mirror, magnifying with metal handle, unscrewable Metal handle unscrewable 0 512 Mirror Ø 0 512 205 30 Mirror housing made of stainless steel 0 51 Pocket telescopic mirror with telescopic handle, mirror can be adjusted on all sides due to hinged joint up to 80 0 51 Mirror Ø 0 51 240 / 80 30 Mirror housing made of stainless steel 0 518 Inspector pocket mirror with lighting and clip After removing the mirror holder, can also be used as a torch, fitted with two 15 volt AA batteries, mirror can be adjusted as necessary using ball hinge 0 518 Mirror Ø 0 518 300 30 Mirror housing made of stainless steel 0 532 Soldering lever chrome plated, with slot, for levering out stuck components from the printed circuit board 0 532 0 532 Lever width 125 35 Pliers / Tweezers / ESD tools / Bolt cutters 0 534 Flexible gripper For gripping very small parts, made of brass, chromeplated guide tube, flexible with steel core 525 15 Max gripping diameter 14 0 540 0 534 0 540 Wire and spring hook doublesided, stainless steel with chequered hexagon handle, for gripping and straightening wire connections as well as hooking and unhooking tension springs Hook Ø, internal 15 525 long 0 534 0 540 94 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

0 02 Pincers for the highest standards in trades and industry, precise, low wear cutting edges made of special tool steel : Polished head, with black handles 180 0 02 11 118 5 years warranty 0 02 0 04 Pincers DIN 9243, for the hardest stresses, precise workmanship, high wear resistance and balanced weight distribution, Material: Special tool steel, cutting edge oil hardened : 01 025 Polished head, black atramentised handle 11 125 Polished head, plastic coated handles 0 04 01 025 0 04 0 04 180 2 225 2 01 018 021 022 025 11 118 121 122 125 0 04 11 125 0 05 Farriers pincers also ideal for dismantling work in coachbuilding/body production Cutting edge hardness approx 55 HRc Special tool steel, oil hardened and tempered : Polished head, with black atramentised handles 0 05 130 300 0 05 130 0 0 Carpenter & concreters nippers for twisting and cutting tying wire for reinforced concrete work, precise, low wear cutting edges made of special tool steel : 122 128 Polished head, plastic painted handles 220 280 Head polished, handles coated with plastic 220 2 280 0 0 122 125 128 0 0 220 2 280 5 years warranty 0 0 122 128 0 0 220 280 Pliers / Tweezers / ESD tools / Bolt cutters Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 947

0 08 Carpenter & concreters nippers DIN 9242, tower pincers/steel fixers nippers for tying rebar steel, unsurpassed precision and durability, Material: Special tool steel, oil hardened : 130 Polished head, plastic atramentised handles 220 300 Head polished, handles coated with plastic 0 08 0 08 0 08 130 220 2 280 300 125 128 130 220 2 280 300 0 08 220 300 0 09 High leverage concreters nippers DIN ISO 9242, for easy and wristprotecting working, optimum cutting performance with low effort, especially for working on thicker wire soft wire up to 45 Ø, Material: Special tool steel, oil hardened : Nickel plated head, nickel plated handles 0 09 130 300 0 09 130 0 12 Side cutters for hard wire, cutting edges induction hardened and made of special tool steel : 114 118 Polished head, with plastic dipped handles 414 418 chrome plated, handles with thick multicomponent sheathing 5 years warranty 0 12 114 118 0 12 polished 0 12 chrome plated 145 180 114 11 118 414 41 418 0 12 414 418 Pliers / Tweezers / ESD tools / Bolt cutters 0 14 Side cutters DIN 5749 B, for hard and soft wire, induction hardened precision cutting edges, cutting edge hardness approx 2 HRC, Material: Vanadium electric steel, oil hardened : 112 118 Polished head, handles with plastic coating 212 218 Head polished, handles with twocoloured multicomponent sheathing 312 318 Head chrome plated, handles with twocoloured multicomponent sheathing 125 140 180 125 140 180 125 140 180 0 14 112 114 11 118 212 214 21 218 312 314 31 318 Cutting capacities mediumhard wire Ø 23 25 28 3 30 25 28 3 23 25 28 3 Cutting capacities hard wire Ø 948 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 15 18 2 25 23 18 2 25 15 18 2 25 0 14 112 118 0 14 212 218 0 14 312 318

0 22 Strong (high leverage) side cutters for hard wire, cutting edges induction hardened, made of special tool steel, : 11 Polished head, with plastic dipped handles 41 420 chrome plated, handles with thick multicomponent sheathing 5 years warranty 0 22 11 180 0 22 polished 11 118 0 22 chrome plated 41 418 420 0 22 41 420 0 30 Strong (high leverage) side cutters DIN 5749 A, with forged on joint axis for even the hardest stresses, for piano wire and soft wire, induction hardened precision cutting edges, cutting edge hardness 4 HRc, Material: Chrome vanadium electric steel, oil hardened : 114 125 Head polished, handles with plastic coating 214 225 Polished head, handles with twocoloured multicomponent sheathing 314 325 Head chrome plated, handles with twocoloured multicomponent sheathing 330 12 angled head, polished, handles with two coloured multicomponent sheathing for flush cutting, with approx 70 space for gripping 401 Polished head, handles with twocoloured multicomponent sheathing with opening spring 0 30 114 125 0 30 214 225 0 30 314 325 0 30 330 140 180 2 140 180 2 140 180 2 180 0 30 114 11 118 125 214 21 218 220 225 314 31 318 320 325 330 401 Cutting values hard wire Ø 2 25 27 3 35 20 25 27 3 35 2 25 27 3 35 3 27 Cutting capacities piano wire Ø 15 2 22 25 3 15 2 22 25 3 15 2 22 25 3 25 22 0 30 401 Pliers / Tweezers / ESD tools / Bolt cutters Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 949

0 32 Centre cutters with forged on hinge axis for hardest, continuous stresses with precision cutting edges for soft, hard and piano wire cuts hard, thick wires with less effort than equally long side cutters centred precision cutting edges high cutting performance with low effort due to optimum coordination of cutting edge angle, transmission ratio and ergonomic handle shape Cutting edges with additional induction hardening, cutting edge hardness approx 4 HRC Chrome vanadium electric steel, hardened in oil and tempered Plastic coated handles 0 32 025 0 32 Cutting capacities hard wire Ø Cutting capacities piano wire Ø 2 025 38 0 38 Mechanics side cutters DIN ISO 5749 for piano wire as well as for very thin and soft wires, induction hardened precision cutting edges with bevel, cutting edge hardness approx 3 HRc, material: Vanadium electric steel, oil hardened : 112 Polished head, plastic coated handles, 312 Head chrome plated, handles with twocoloured multicomponent sheathing 0 38 112 0 38 Cutting capacities Cu wire Ø Cutting capacities piano wire Ø 0 38 312 125 125 112 312 04 25 04 25 bis 0 bis 0 0 48 Mechanics side cutters DIN ISO 5749, for soft wires only, induction hardened precision cutting edges, cutting edge hardness approx 3 HRc, without bevel, with spring for level cutting, material: Vanadium electric steel : Polished head, handles with twocoloured multicomponent sheathing 0 48 Cutting capacities Cu wire Ø 0 48 112 125 112 04 25 Pliers / Tweezers / ESD tools / Bolt cutters 0 Plastic side cutters for plastic, without bevel, for smooth cutting off of the sprues on plastic parts, with opening spring, material: Vanadium electric steel, oil hardened : Head polished, handles with plastic coating 140 0 114 11 21 31 Cutting edges 45 angled Cutting edges 85 angled 0 114 + 11 0 21 0 31 9 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

0 84 End cutters DIN ISO 5748, for hard and soft wire, cutting edges also induction hardened, cutting edge hardness approx 1 HRc, Material: Special tool steel, oil hardened : Head polished, plastic coated handles 0 84 Cutting capacities Ø mediumhard wire Cutting capacities Ø hard wire 0 84 180 11 118 28 32 35 23 25 28 0 92 Strong, highleverage end cutters DIN ISO 5748, for piano wire as well as for soft wires, cutting edges also with induction hardening, cutting edge hardness approx 4 HRc, material: Chrome vanadium electric steel, oil hardened : 114 Head ground + polished, handles with plastic coating 31 320 Head chrome plated, handles with twocoloured multicomponent sheathing 0 92 114 0 92 Cutting capacities Ø hard wire Cutting capacities Ø Piano wire 0 92 31 + 320 140 114 11 31 320 2 25 3 25 3 15 2 25 2 25 0 94 Bolt endcutting nippers compared to conventional end cutters: higher cutting capacity, greater opening width, better force transfer, lower weight, forged, for 30 Ø piano wire as well as for thick, soft wire such as rivets, bolts, etc Cutting edges with additional induction hardened approx 4 HRc Material: vanadium electric steel, oil hardened : Polished head, plastic coated handles 0 94 0 94 0 82 Wire cable cutters with particularly strong shear blade head and transmission, long tubular arms with PVC coating, plastic handles 700 Replacement head 0 82 Cutting capacity soft 1570 N/ 2 Ø 12 Cutting capacity hard 1770 N/ 2 Ø 0 82 Pliers / Tweezers / ESD tools / Bolt cutters Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 951

0 848 Compact bolt cutters with precision cutting edges for soft, hard and 3 Ø piano wire Cuts soft materials such as bolts, nails, rivets, etc up to Ø 52 Particularly high cutting performance with little effort due to new type of lever design Cutting edge hardness approx 4 HRc Forged Chrome vanadium electric steel, oil hardened and tempered : Plastic coated handles 140 Plastic coated handles, with opening spring and clip lock 220 Handles with twocoloured multicomponent sheathing 320 The recess in the cutting edge makes it easier to cut thicker wires, eg in suspended ceiling structures 0 848 0 848 140 0 848 220 0 848 140 220 320 320 with additional recess 5 years 0 852 Bolt cutters with forged joint and tubular steel arms, adjustable cutting jaws, handles made of PVC, GS tested warranty 0 852 Cutting capacity at 45 HRc Ø 0 852 300 4 00 7 900 030 045 00 075 090 7 8 9 Pliers / Tweezers / ESD tools / Bolt cutters 0 85 Bolt cutters Cutting heads made of special steel, tempered and induction hardened, with tubular steel arms, red powder coated, with tappet readjustment and PVC handles 0 80 Replacement cutter heads made of special heattreated steel, induction hardened and tempered, including screws 4 800 900 0 85 045 01 080 090 0 80 Replacement cutting heads 045 01 080 090 Cutting capacity for soft material Ø 11 13 15 5 years warranty Cutting capacity for hard material Ø 7 9 11 13 0 85 045 090 0 80 045 090 952 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

0 82 Bolt cutters with forged joint and tubular steel arms, adjustable cutting head, cutting edges induction hardened, special cutting head enables round material of any coon hardness to be cut, cutting head readjusted using the eccentric screws 0 83 Replacement cutter heads complete, for bolt cutters No 0 82 0 82 04 0 82 0 83 Replacement cutting heads Cutting capacity round material HRc 48 (hard) Ø 40 70 9 70 04 01 07 091 7 14 11 17 191 207 0 85 Bolt cutters with angled, readjustable cutter heads for flush cutting off of formwork wires, cutting edges induction hardened, cutter head readjusted using eccentric screws 5 7 8 9 0 83 11 0 8 Replacement cutter heads complete, for bolt cutters 0 85 0 85 04 0 85 0 8 Replacement cutting heads Cutting capacity round material HRc 40 Ø 40 04 01 04 01 8 0 872 Reinforcement steel mesh cutters with tubular steel arms, powder coated, with tappet readjustment and PVC handles, cutting heads made of special steel, heattreated, induction hardened and tempered 5 years warranty 0 874 Replacement cutter heads complete, including screws, for reinforcement steel mesh cutters 0 872 0 872 800 900 840 0 872 080 090 0 874 Replacement cutting heads 080 090 0 875 Grating cutters Cutter head with force transmission, cutters made of high alloy steel, drop forged, heat treated and induction hardened, arms with plastic handles 0 875 Cutting capacity Mesh size from 40 x 4 30 x 30 Cutting capacity at 785 N/ 2 8 9 0 875 Pliers / Tweezers / ESD tools / Bolt cutters Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 953

1 Cross pein haers Haer head to DIN 41 made of C45 quality steel, dropforged, carefully hardened and tempered, fixed with ring wedges and sealed with synthetic resin, working surfaces ground, transparent varnished ash shaft, TÜVGS tested and VPAGS tested 1 004 Cross pein haers DIN 41, as Prod 1 ; however, with curved hickory shaft 5 years warranty 1 Weight without shaft g 1 Ash shaft 1 004 Hickory shaft Shaft length with hickory shaft 1 004 300 400 0 00 800 0 10 0 0 020 030 040 0 00 080 1 0 020 030 040 0 00 080 1 20 280 300 3 320 330 3 30 380 400 1 005 Cross pein haers similar to DIN standard with forged on protective shaft collar and nylon protective sleeve, ash shaft with transparent varnish, fixed with ring wedges and synthetic resin sealed, drop forged, stoveenamelled, carefully hardened and tempered, working faces ground 5 years warranty 1 00 Cross pein haers similar to DIN standard, like Prod 1 005; however with hickory shaft transparent varnished 1 005 Weight without shaft g 300 0 800 0 10 1 005 1 00 Shaft length Ash shaft Hickory shaft 030 030 300 0 0 320 080 080 3 30 1 1 380 with hickory shaft 1 00 Haers / Chisels / Centre punches / Scrapers / Scissors & shears 1 008 Cross pein haers Haer head to DIN 41 made of C 45 quality steel according to DIN 17, drop forged, carefully hardened and tempered, black powder coated, ground striking face and pein, with nickel plated protective shaft sleeve pressed into the haer eye, with hickory shaft Weight without shaft g 300 400 0 800 0 10 0 1 008 020 030 040 0 080 1 1 0 RotbandPlus cross pein haers Haer head to DIN 41 made of special steel, curved hickory shaft, with additionally long, hardened shaft protection sleeve, through the sleeve, with wedge, fixing plate and wood screw join the haer head and wooden shaft to form a single unit with a long life and a high degree of safety Weight without shaft g 300 0 800 0 1 0 020 030 0 080 Shaft length 280 300 3 320 3 30 380 400 Shaft length 280 300 320 3 30 with hickory shaft with hickory shaft 1 008 1 0 954 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

1 017 Cross pein haer, rebound absorbing Drop forged haer head made of highquality special steel with bright ground pein and striking face as well as bevelled edge in accordance with the regulations Haer face and pein carefully hardened and tempered The special connection between the haer head and shaft sleeve creates an inseparable, vibration absorbing unit Ergonomically shaped hickory shaft Perceptible rebound absorbing and therefore full force of blow transferred onto the workpiece Fatiguefree working, gentle on the haer user s joints due to low vibration on impact Shaft protective sleeve with rubber covering to absorb mishits rebound absorbing 1 017 Weight g 1 017 300 0 800 0 005 008 0 300 320 3 30 1 011 Cross pein haers Haer head according to DIN 41, made of quality steel, shaft inseparably connected to haer head, Ultratec shaft made of 3 components with glass fibre core, unbreakable with Ultratec shaft 1 014 Cross pein haers DIN 41, with unbreakable Ultramid plastic shaft, with safety keying with wedges and permanently fixed shaft seat 1 011 with Ultramid shaft Weight without shaft g 300 0 800 0 10 1 01 Softface attachments for pein haers made of polyurethane For haers g Weight g 3000 4000 00 300 0 800 0 1 011 020 030 0 080 1 1 019 030 040 0 1 01 030 0 080 020 030 0 080 1 019 Sledgehaers with ULTRATEC glass fibre shaft unbreakable Considerably less vibrations than conventional glass fibre shafts Haer head made of grade C 45 steel, face and pein ground 1 014 Shaft length 270 300 330 330 3 3 Shaft length 80 80 80 with Ultratec shaft 1 014 1 01 1 019 Haers / Chisels / Centre punches / Scrapers & Removers / Scissors & shears Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 955

1 020 Sledgehaers DIN 42, forged quality, carefully hardened and tempered, made of grade C 45 steel according to DIN 17, face and pein ground, with hickory shaft 1 021 Sledgehaers made of C45 forged steel, hardened, ground on all sides, polished pein and face, black painted head, with ash shaft with hickory shaft 1 020 Weight without shaft g 3000 4000 00 000 8000 00 Shaft length 00 700 800 800 900 900 1 020 030 040 0 00 080 1 021 030 040 0 00 080 with ash shaft 1 021 1 022 Club haers Club haer head to DIN 475 made of C45 quality steel, dropforged, carefully hardened and tempered, with ring wedges and sealed with synthetic resin, working surfaces ground, transparent varnished hickory shaft, TÜVGS tested, transparent varnished shaft 5 years warranty with hickory shaft 1 024 Club haers DIN 475, as 1 022; however, in addition with shaft protection sleeve 1 022 Weight without shaft g 1 022 1 024 Shaft length Haers / Chisels / Centre punches / Scrapers & Removers / Scissors & shears 0 12 10 0 125 1 125 1 1 02 Club haers Haer head according to DIN 475, made of quality steel, shaft inseparably connected to haer head, Ultratec shaft made of 3 components with glass fibre core, unbreakable Weight without shaft g 0 12 10 0 For club haers g 10 1 02 301 312 315 320 1 028 Rubber face attachment for club haers according to DIN 475 1 028 1 1 030 Copperfaced haers similar to DIN 5130, with ash shaft, club haer shape, made of electrolytic copper, with bevelled edges, particularly suitable for straightening shafts, bright sheet metal, during assembly or installation, for adjusting tools, etc Weight without shaft g 2 0 7 0 10 0 1 030 025 0 075 1 20 20 280 300 20 20 280 300 Shaft length Shaft length 280 320 320 30 30 380 with hickory shaft and shaft protection sleeve 1 024 1 02 1 028 1 1 030 95 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

1 034 Lightweight metal haers Cylindrical, with double curved, varnished hickory shaft and transverse pinning as additional shaft fixing For planishing, panel beating as well as straightening the workpieces Weight without shaft g 1 034 Head size Ø x width Shaft length 1 034 2 0 7 0 10 125 1 175 2 40 x 80 x 98 0 x 0 x 130 70 x 145 290 320 340 380 380 1 038 Carpenters roofing haer/slaters haer DIN 7239, with tubular steel shaft, shaft fixing and plastic handle, with magnetic nail holder, painted black, GS tested 1 039 Carpenters roofing haer/slaters haer DIN 7239, as Prod 1 038; however, with nail holder, without magnet with magnetic nail holder 1 038 00 Weight g 1 038 Magnet 1 039 Shaft length 1 039 00 00 00 00 330 1 042 Carpenters roofing haer/slaters haer DIN 7239, with tubular steel shaft and rubber handle, haer head fixed with transverse pin, with nail holder, painted black, GS tested 1 044 Carpenters roofing haer/slaters haer DIN 7239, as Prod 1 042; however, with magnetic nail holder Weight g 00 00 Replacement ash shaft Weight g 7 1 042 00 00 070 1 02 075 1 044 Magnet 00 1 05 Bricklayers haer with ash shaft, Rhenish model, drop forged and hardened Weight without shaft g 1 05 1 02 Bricklayers haer with tubular steel shaft and plastic handle, Berliner model, drop forged and hardened, GS tested Shaft length 300 Shaft length 280 with magnetic nail holder Shaft length 330 1 042 00 1 044 00 1 05 00 1 02 075 Haers / Chisels / Centre punches / Scrapers & Removers / Scissors & shears Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 957

1 0 Drywall haer with tubular steel shaft and plastic handle, drop forged and hardened, GS tested Weight g 700 1 0 070 Shaft length 320 1 0 070 9 8 Chipping haers DIN 5133, tips ground and hardened 201: with wooden shaft made of ash 211: with round steel shaft 212: with oval steel shaft 9 8 201 9 8 212 9 8 Weight g Wooden shaft Allsteel, round Allsteel, oval 201 211 212 ca 340 ca 400 ca 400 1 084 Haer shafts DIN 5111, heavy, straightgrained wood quality, sanded and waxed, double curved shape, according to quality class A in accordance with DIN 8340 Haers / Chisels / Centre punches / Scrapers & Removers / Scissors & shears 20 280 300 3 320 330 3 30 380 400 280 300 3 320 3 30 380 400 1 084 0 020 030 040 0 00 080 1 1 088 Hickory haer shafts made of hickory, for cross pein haers with shaft protection sleeve, double curved design 270 300 330 330 3 1 088 020 030 040 0 080 1 1 089 Ultramid haer shafts made of unbreakable Ultramid plastic, for cross pein haers 1 014 and haer heads according to DIN 41, simple, safe assembly 1 089 020 030 0 080 For haer weight g 300 400 0 00 800 0 10 0 For haer weight g 300 400 0 800 0 10 0 For haer weight g 300 0 800 0 unbreakable 1 084 1 088 1 089 958 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

1 090 Sledgehaer shafts DIN 5112, heavy, straightgrained wood quality with long durability, straight shape, wax polished 00 700 800 900 1 090 030 040 0 080 For haer weight g 3000 4000 00 / 000 8000 / 00 1 090 1 094 Club haer shafts DIN 5135, heavy, straightgrained wood quality with long durability, curved shape, wax polished 1 094 For club haer weight g 1 094 20 280 300 1 0 / 12 10 0 1 FERROPLEX Combination cross pein and softfaced haer universal, compact, costsaving, haer head made of highquality quenched and tempered steel, face hardened and heattreated, replaceable nylon insert made of special extruded nylon Tubular steel shaft made of drawn precision tubular steel with comfortable, shockabsorbing rubber handle Red marking ring for conspicuous identification of the different striking faces Weight g 1 Head Ø 1 00 800 00 080 30 35 290 295 1 2 Soft faced haers with faces made of Cellidor, for general use, with hickory shaft 1 3 Replacement faces made of Cellidor, suitable for soft faced haers 1 2 Face Ø 22 27 32 35 40 0 22 27 32 35 40 1 2 022 027 032 035 040 0 00 022 027 032 035 040 0 1 3 Spare faces 022 027 032 035 040 0 00 022 027 032 035 040 0 Face length 75 90 95 5 1 115 135 1 Soft faced haers with faces made of nylon, high notched impact strength and ash shaft 1 7 Replacement faces made of nylon, suitable for soft faced haers Prod No 1 Face Ø 1 1 7 Spare faces Face length 75 90 95 5 1 115 Overall length 2 25 280 290 320 340 380 Overall length 2 25 280 290 320 340 Weight g 195 280 380 40 5 925 13 Weight g 193 27 374 455 5 905 1 2 1 3 1 1 7 Haers / Chisels / Centre punches / Scrapers & Removers / Scissors & shears Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 959

1 1 Soft faced haers with faces made of urethane, for haering sharpedged workpieces, abrasion resistant and shatter proof, with hickory shaft 1 111 Replacement faces made of urethane 1 1 Face Ø 1 1 1 111 Spare faces Face length Overall length Weight g 1 111 22 27 32 35 40 022 027 032 035 040 0 022 027 032 035 040 0 75 90 95 5 1 115 2 25 280 290 320 340 193 27 374 455 5 905 1 114 Replacement softfaced haer shaft Hickory, for softfaced haers No 1 2 1 1 Hickory Head Ø 22 27 32 35 40 0 1 114 022 027 032 035 040 0 00 Shaft length 2 25 280 290 320 340 380 1 114 Haers / Chisels / Centre punches / Scrapers & Removers / Scissors & shears 1 115 Punch, not reboundfree both sides with replaceable white, hard nylon inserts For all assembly, installation and repair work For replacement nylon inserts, see from Prod No 1 115 1 Head Ø 12 15 20 25 30 35 1 115 0 012 015 020 025 030 035 18 170 175 1 1 155 155 Weight g 130 1 117 Rapper, reboundfree both sides with replaceable white, hard nylon inserts For all assembly, installation and repair work on housings and for the jointing of workpieces For replacement nylon inserts, see from Prod No 1 134 022 Head Ø 1 117 Weight g 220 330 40 1 115 Spare inserts 1 112 115 1 134 Inserts 022 023 024 1 115 0 015 1 115 1 115 1 117 90 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

1 118 Nonrebounding soft faced haers Yellow haer faces, mediumhard polyurethane, colourfast and wearproof Housing made of tubular precision steel Hickory wood shaft with ergonomic profile With haer heads filled with hard cast iron particles GS tested 025 00: Particularly suitable for workpieces in the machine vice or for assembly or installation work 080 : Sledgehaer style Particularly suitable for positioning during installation and dismantling work, straightening bis 0 1 118 025 1 118 080 Head Ø 25 30 35 40 45 0 Sledgehaer type: 80 1 118 Head length 025 8 320 030 115 3 035 118 355 040 125 375 045 130 380 0 135 385 00 15 420 080 205 880 2 0 Weight g 320 40 580 70 0 12 0 45 80 1 Nonrebounding soft faced haers type like No 1 118; however, with tubular steel shaft and rubber handle 1 Head Ø 1 Head length Weight g 30 40 034 038 115 125 290 305 00 8 1 122 Replacement faces made of polyurethane, for soft faced haers No 1 118 + 1 Face Ø 25 30 35 40 45 0 80 For head Ø 25 30 35 40 45 0 1 124 092 094 09 098 1 1 122 025 030 035 040 045 0 00 080 1 124 Replacement hickory shafts for softfaced haers No 1 118 1 128 Nonrebounding soft faced haers with hickory shaft and interchangeable haer faces made of wearproof nylon 25 30 35 40 0 025 030 035 040 0 00 5 1 1 115 145 305 330 335 30 370 370 Shaft length g 300 430 5 7 0 1700 295 320 335 335 30 1 122 1 124 Head Ø 1 128 Head length Weight 1 128 with hickory shaft Haers / Chisels / Centre punches / Scrapers & Removers / Scissors & shears Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 91

1 130 Nonrebounding soft faced haers with tubular steel shaft and hard rubber handle With interchangeable faces made of wearproof nylon Head Ø 30 35 40 0 1 130 030 035 040 0 00 Head length 1 1 115 145 290 295 300 3 325 Weight g 580 700 8 1 1780 1 130 1 132 Nonrebounding soft faced haers with 3 component shaft, ergonomic and with a good grip, excellent haering properties, reboundfree and low vibration, resistant to oil, acids and alkalis With interchangeable faces made of wearproof nylon with 3component shaft easy to change replacement heads 1 132 Head Ø 1 132 Head length Weight g 40 0 040 0 00 115 145 370 380 390 780 90 Haers / Chisels / Centre punches / Scrapers & Removers / Scissors & shears 1 134 Replacement faces made of nylon, for soft faced haers No 1 128 to 1 132 and rapper No 1 117 Face Ø 25 30 35 40 0 1 134 022 023 024 025 027 028 1 134 1 13 SECURAL Softfaced haer, nonrebound For automobile assembly/repair work Positioning workpieces in the vice, panel beating Planishing, housing assembly Furniture making, building windows/doors, laying parquet/laminate Joiner s workshop, coachbuilding/body construction Made of stable sheet steel casing with rubber handle Inserts: Polyurethane, yellow 30 x 40 rectangular 1 13 030 Head size 30 x 40 030 117 1 137 Inserts for SECURAL soft faced haer Suitable for soft faced haer 1 13 Made of polyurethane, yellow Size Size 30 x 40 1 13 1 137 030 Head length 300 Weight g 700 1 137 030 92 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

1 138 Nonrebounding soft faced haers no sparking, for haering work with increased risk of fire and explosion, acid and oil resistant, PUR sheathed steel casing, ergonomic rubber handle, gentle use for all applications Head Ø 1 138 Head length No sparking! 1 138 35 45 0 135 145 1 78 90 5 280 300 320 380 1 140 Soft faced haers SIMPLEX with twopiece malleable cast iron casing, face inserts and wooden shaft, are fixed with an Allen screw, beads in the insert and shaft holder prevent the shaft and inserts from slipping and twisting, the head inserts and shaft can be quickly replaced, with face inserts made of a black rubber composition 1 140 Head Ø 1 140 Head length Weight g 30 40 0 80 030 040 0 00 080 90 1 135 145 175 300 330 3 405 490 340 1170 3220 Accessories for SIMPLEX soft faced haers 1 143 Face inserts made of rubber composition, black 1 144 Face inserts made of plastic, red 1 14 Face inserts made of super plastic, white 1 148 Face inserts made of nylon, white 1 1 Face inserts made of soft metal, silvercoloured Face Ø 30 40 0 80 1 143 Rubber 030 040 0 00 080 1 144 Plastic 030 040 0 00 030 040 0 00 080 1 152 Casing made of malleable cast iron, for SIMPLEX soft faced haers No 1 140 2piece, without face inserts For head Ø 30 40 0 80 1 152 030 040 0 00 080 1 143 1 14 S plastic 1 144 1 14 1 148 1 1 1 148 Nylon 030 040 0 00 080 1 1 Soft metal 030 040 0 00 080 1 152 Haers / Chisels / Centre punches / Scrapers & Removers / Scissors & shears Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 93

1 158 Shafts made of wood, for SIMPLEX soft faced haers No 1 140 For head Ø 30 40 0 80 80 1 158 030 040 0 00 080 081 Shaft length 20 275 3 335 395 700 1 158 1 12 Rubber haers with ash shaft, made of hard rubber, Shore hardness 95, with strong driving blow effect, nonelastic, with flat faces, No 15, with one flat and one halfround face Head length 1 12 Head Ø Shaft length Weight g 1 12 040 80 040 40 90 055 55 115 05 5 130 075 75 140 090 90 115 15 5 20 320 340 380 380 340 170 300 0 800 11 0 1 12 15 1 14 Replacement ash shafts for rubber haers No 1 12 Size 1 14 1 14 Haers / Chisels / Centre punches / Scrapers & Removers / Scissors & shears 1 18 Wooden haers made of soft beechwood with pressed on metal sheath and oval shaft made of ash wood Head length 0 1 2 + 5 3 4 1 18 004 005 Head Ø 0 00 0 140 070 70 080 80 180 090 90 1 173 Double ball chasing haers with curved ash shaft, faces with different degrees of curvature and finely polished Weight without shaft g 300 0 1 173 020 030 0 Shaft length 280 300 320 3 380 400 Weight g 220 370 8 1 1400 Shaft length 280 300 320 1 18 1 173 94 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

1 181 Double ball smiths haers with curved ash shaft, one face with a flat curvature, the other with a marked high curvature, finely polished Weight without shaft g 2 400 1 181 025 040 Shaft length 300 3 1 181 1 187 Hatchets painted, polished blade, with polished cows foot shaft made of ash 1 187 Weight g 1 187 Shaft length 00 800 00 080 380 380 1 189 Axes Rhenish shape, painted, polished blade, with polished cows foot shaft made of ash 1 189 Weight g 1 189 Shaft length 12 125 700 800 1 193 Clawtype wedges Sthe ideal fixing for haers, axes, hatchets, etc, when knocked into the wood the differently ground claw ends dig into the wood and an permanent connection is formed between the tool and the shaft, the cast on clamping ridges increase the minimum pull out resistances required by the DIN standards, 070 and 080 without clamping ridges Size 1 2 3 4 5 7 8 1 193 0 020 030 040 0 00 070 080 1 197 Ring haer wedges The ideal fixing for haers, axes, hatchets, etc, wedgeshaped steel sleeves which uniformly press the wood from all sides and firmly dig into the would with their sharpedged shoulder Size 0 2 3 5 7 8 1 197 0 011 012 014 015 01 017 Claw width 13 18 22 28 31 34 37 40 12 14 1 18 20 22 24 For haers g 300 400 0 800 0 10 0 3000 00 For hatchets For axes Ø 7 9 12 13 15 17 1 193 020 1 193 070 1 197 Haers / Chisels / Centre punches / Scrapers & Removers / Scissors & shears Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 95

1 204 Chisels for electric rotary haer drills and breakers Description Shank end type A SDSplus Point chisel Flat chisel Hollow chisel Tile chisel Tile chisel, curved Shank end type B SDSmax Point chisel Point chisel Flat chisel Flat chisel Hollow chisel Tile chisel Tile chisel 1 204 / blade width 2 2/20 004 2/22 005 2/40 00 2/40 012 400 013 00 014 280/25 015 400/25 01 300/22 017 400/ 018 300/80 Shank: SDSplus Shank: SDSmax Haers / Chisels / Centre punches / Scrapers & Removers / Scissors & shears 1 204 Chisels for paving breakers suitable for Mannesmann Demag paving breakers Description 1 204 Working length Blade width Shank end type: R 3 x 3 with collar Suitable for chipping haer 84 830 0 Point chisel 201 125 Point chisel 203 Flat chisel 205 125 15 Flat chisel 207 195 15 Flat chisel 209 2 15 Wide chisel 211 125 40 Blank 213 125 Shank end type: RS 143 x with collar Suitable for paving breaker set 80 82 023, chipping haer 84 830 01 Point chisel 301 135 Point chisel 303 Point chisel 305 2 Flat chisel 307 135 15 Flat chisel 309 135 20 Flat chisel 311 15 Flat chisel 313 20 Flat chisel 315 2 20 Butt chisel 317 135 30 Wide chisel 319 180 40 Wide chisel 321 180 0 Blank 323 135 Blank 325 1 Blank 327 Other chisels for Mannesmann Demag machines available on request 201 213 301 327 9 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

1 204 Chisels for Bosch breakers and demolition haers For high removal rates in natural stone, masonry and concrete Highquality special steel Lowwear surface Maximum working strength, long tool times 1 to 519: 28 hexagonal shank Suitable for BOSCH breaker GSH 128 (80 225 128) 01 to 11: 30 hexagonal shank Suitable for BOSCH breaker GSH 130 (80 225 130) 1 and 01: With starshaped, selfsharpening blade 1 204 1 1 204 3 1 204 5 1 204 9 1 01 Description 1 204 Working length Blade width 28 hexagonal shank Pointed chisel 1 400 (starshaped) Pointed chisel 3 400 (standard) Pointed chisel 5 520 Flat chisel 7 400 3 Flat chisel 9 520 3 Tile chisel 511 400 80 Asphalt cutter 513 0 125 Spade chisel 515 400 135 Earth driving rod 517 300 Toolholder for 519 390 tamping plates 30 hexagonal shank Pointed chisel 01 400 (starshaped) Flat chisel 03 400 35 Tile chisel 05 4 75 Asphalt cutter 07 4 125 Spade chisel 09 4 135 Toolholder for 11 400 tamping plates Tamping plate 701 Requires the toolholder 1 x 1 519 or 11 Tamping plate 703 Requires the toolholder x 519 or 11 The starshaped and selfsharpening blade of the SDSmax RTec chisel ensures a consistently high removal rate Standard chisels on the other hand have to be repeatedly resharpened, which results in costs and downtimes 1 204 511 1 204 513 1 204 515 1 204 517 1 204 01 1 204 701 Inductive hardening: Different hardness zones make the Bosch chisels extremely dimensionally stable, breakproof and durable Constantly high removal rate due to the innovative starshaped and selfsharpening cutting edge Haers / Chisels / Centre punches / Scrapers & Removers / Scissors & shears Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 97

Welding and Cutting catalogue Autogenous engineering Filler metals Arch welding Welding equipment Welding accessories: Extractor Technology Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

1 207 Flat chisel Chrome vanadium air hardened steel, forged, hardened, heattreated head, painted, blade painted 125 1 175 2 300 1 207 0 012 015 017 020 025 030 Blade width 15 15 18 21 24 25 2 5 years warranty Steel thickness 14 x 9 17 x 11 17 x 11 20 x 12 23 x 13 23 x 13 23 x 13 1 207 1 2 Flat chisel Chrome vanadium air hardened steel, octagonal, forged, hardened, heattreated head, painted, blade painted 5 years warranty 1 2 Blade width Steel thickness 1 2 125 1 012 015 12 15 12 1 213 Cross cut chisel Chrome vanadium air hardened steel, forged, hardened, heattreated head, painted, blade painted 5 years warranty 1 213 1 213 Blade width Steel thickness 125 1 175 2 1 219 Cross cut chisel Chrome vanadium air hardened steel, octagonal, forged, hardened, heattreated head, painted, blade painted 125 1 1 225 Splitting/Parting chisel Chrome vanadium air hardened steel, octagonal, forged, hardened, heattreated head, painted, blade polished 125 125 012 015 017 020 025 1 219 012 015 1 225 5 7 8 9 Blade width approx 7 Width 2 3 17 x 11 17 x 11 17 x 11 20 x 12 23 x 13 5 years warranty Steel thickness 12 5 years warranty Steel thickness 1 219 1 225 Haers / Chisels / Centre punches / Scrapers & Removers / Scissors & shears Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 99

1 229 Raking chisel Chrome vanadium air hardened steel, octagonal, forged, hardened, heattreated head, painted, blade polished 1 1 1 1 1 1 229 004 005 00 Groove width 2 3 4 5 5 years warranty Steel thickness 12 12 1 229 1 231 Slotting chisel Chrome vanadium air hardened steel, for metal working and stonework, forged, hardened, heattreated head, painted, blade painted 5 years warranty 1 231 Steel thickness 1 231 024 240 024 2 x 7 1 234 Masons chisel/bolster Chrome vanadium air hardened steel, octagonal, hardened, heattreated head, painted, blade painted, ground shaft 5 years warranty 1 234 Blade width Steel thickness 1 234 2 300 3 400 0 00 020 025 030 035 040 0 00 23 23 2 2 30 30 34 1 1 18 18 20 20 20 Haers / Chisels / Centre punches / Scrapers & Removers / Scissors & shears 1 237 Point chisel Chrome vanadium air hardened steel, forged, hardened, heattreated head, painted, tip painted 2 300 3 400 0 1 237 020 025 030 035 040 0 1 240 Chisel hand guard protects your hand against injuries, for all flat oval and octagonal shaft chisels Material Plastic 1 240 012 1 243 Electricians chisel Chrome vanadium air hardened steel, octagonal, forged, hardened, heattreated head, painted, blade painted 2 2 300 1 243 020 021 025 02 030 Blade width 12 12 14 12 Steel thickness 1 1 18 18 20 20 5 years warranty 5 years warranty 5 years warranty Steel thickness 8 12 1 237 1 240 012 1 243 970 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

1 245 Centre punches Chrome vanadium air hardened steel, octagonal, hardened, heattreated head, painted 1 1 245 012 013 015 5 years warranty Steel thickness 12 1 1 245 1 248 Centre punches Chrome vanadium air hardened steel with deep soldered in hard metal tip 5 years warranty 1 248 Shank Ø with cemented carbide tip 1 248 0 0 1 2 Automatic centre punch for onehand use, with spring mechanism, highquality, extremely clean design, made of special tool steel 5 years warranty 1 2 Shank Ø 1 2 125 Replacement tip insert 90 013 113 14 1 252 Centring punches, adjustable for uses in toolmaking and jig & fixture construction for transferring existing holes onto other tools 1 252 : 3 pce set in plastic case 8 8 11 11 1 3 piece set 1 254 Plain engineers plug gauge round, made of special highstrength steel, cleanly turned on lathe, shank tolerance according to h9 Shank Ø 13 15 17 19 21 23 25 28 31 Size 1 254 013 015 017 019 021 023 025 028 031 1 252 00 008 011 1 170 170 190 190 2 230 95 5 115 1 252 00 011 Taper length 0 0 0 70 70 80 80 90 1 252 1 254 Haers / Chisels / Centre punches / Scrapers & Removers / Scissors & shears Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 971

1 255 Taper pin punches Chrome vanadium air hardened steel, octagonal, hardened, heattreated head, painted Tip Ø 1 2 3 2 3 4 5 7 8 9 12 1 255 012 013 014 015 01 017 018 019 020 022 1 1 1 1 1 1 5 years warranty Shank Ø 12 12 12 12 12 12 12 1 1 1 1 255 1 25 Engineers taper pin punches round, made of special highstrength steel cleanly turned on lathe, bright ground shaft, painted shaft 5 years warranty Tip Ø 1 25 Taper length Shank Ø 1 25 5 8 9 11 12 14 15 1 004 005 00 007 008 009 0 180 230 2 280 315 340 380 1 130 130 140 155 170 190 220 12 13 1 20 22 24 27 30 32 3 Haers / Chisels / Centre punches / Scrapers & Removers / Scissors & shears 1 257 Parallel pin punches Chrome vanadium air hardened steel, octagonal, hardened, heattreated head, painted Tip Ø 2 3 4 5 7 8 12 1 257 004 005 00 007 008 0 012 1 1 1 1 1 1 1 1 1 1 259 Parallel pin punches with guide sleeve, knurled shaft, nickel plated, insert made of material 115 CrV3, hardened, HRc 5559, finely ground and polished, the driving tip is positioned with the guide sleeve pushed to the front, during drifting out the driving pun is supported by the movable sleeve and at the same time, to a large extent, prevents the driving tip from breaking off Tip Ø 09 14 18 24 28 34 39 59 * * without guide sleeve 1 259 009 014 018 024 028 034 039 059 Steel thickness 80 85 88 92 9 9 12 12 14 14 5 years warranty Set composition under Prod No 1 259 800 1 257 1 259 972 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

1 259 Parallel pin punch set as 1 259 in a sheet steel case 5 years warranty Qty Ø 1 259 8 09 14 18 24 28 34 39 59 800 1 259 800 1 21 Rivet setter Chrome vanadium air hardened steel, octagonal, heattreated head, painted 5 years warranty For rivet shank Ø 1 21 Hole Ø 1 21 2 3 4 5 8 004 005 00 008 25 35 5 7 9 1 1 1 23 Rivet header/snap die Chrome vanadium air hardened steel, octagonal, heattreated head, painted For rivet shank Ø 2 3 4 5 8 1 23 004 005 00 008 1 29 Taper pin punch set in plastic holder, chrome vanadium airhardened steel, hardened, painted surface, heattreated head, consisting of: Taper pin punches, centre punch 1 270 Taper pin punch set in hinged plastic case, chrome vanadium airhardened steel, hardened, painted surface, heattreated head, consisting of: Taper pin punches, centre punch 1 29 Qty Ø Tapered pin punches 1, 2, 3, 4, 5, centre punch Hole Ø 35 52 7 88 5 14 1 270 5 years warranty 1 1 5 years warranty 1 29 1 23 1 270 Haers / Chisels / Centre punches / Scrapers & Removers / Scissors & shears Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 973

1 277 Parallel pin punch set in plastic holder, chrome vanadium airhardened steel, hardened, heat treated head, painted surface 1 278 Parallel pin punch set in hinged plastic case, chrome vanadium airhardened steel, hardened, heat treated head, painted surface 5 years warranty 1 277 Qty Ø 1 277 1 278 1 278 3, 4, 5,, 7, 8 1 283 Tool kit in plastic holder, chrome vanadium airhardened steel, heat treated head, painted surface 5 years warranty 1 285 Tool kit in hinged plastic case, chrome vanadium airhardened steel, heat treated head, painted surface Haers / Chisels / Centre punches / Scrapers & Removers / Scissors & shears 1 Flat chisel 1 Flat chisel 1 Cross cut chisel 1 Taper pin punch 1 Taper pin punch 1 Centre punch Dimensions 1 x 12 125 x 125 x x 12 x 3 1 x x 4 x 1 293 Pry bar with bent tip and handle 0 00 400 0 00 1 283 0 00 1 295 Tyre lever made of special steel with a curved cutting edge and a tapering tip 1 295 1 293 004 005 00 1 285 Ø 1 20 1 283 1 285 1 293 1 295 974 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

1 29 Rightangled lever bar round, made of quality steel, heat treated pointed ends, painted black 300 3 400 4 0 5 1 29 004 005 00 Ø 12 14 1 20 2 1 29 1 301 Crow bars, bent end Shank with bevelled edges, bent cutting edge and tip, made of square steel bar 1 301 015 1 30 Crowbars, bent claw end with bent claw and tip, made of round steel bar 30 1 309 Crow bars, straight with straight cutting edge and tip, made of round steel bar 30 1 30 015 1 309 015 1 301 1 30 1 309 10 015 015 015 1 319 Pry bars/nail pullers made of hexagon profile, with a highly cranked clawed cutting edge and a slightly bent cutting edge 0 00 800 1 319 0 00 080 1 402 Threesquare hollow scraper adjustable, finely polished, nickel plated handle, forged blade, for precision scraping work Scraper length 85 Replacement blade 1 402 1 1 40 Three square precision engineers scraper for very fine, precision work, with hollow blade made of chrome vanadium steel and plastic handle, the blade is sheathed up to the tip, for fine, precise scraping work Blade length 80 1 40 Steel thickness 18 18 18 of holder 95 15 Side width 9 1 319 1 1 40 Haers / Chisels / Centre punches / Scrapers & Removers / Scissors & shears Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 975

1 408 Threesquare hollow scraper made of special steel, with painted handle, for precision engineers and mechanics Blade length 75 1 408 1 412 Threesquare hollow scraper made of tool steel, with painted handle 5 years warranty Side width 3 5 years warranty 1 408 Blade length 1 412 Side width 1 412 125 1 175 2 300 012 015 017 020 025 030 14 14 14 1 1 1 1 41 Threesquare solid scraper made of tool steel, with painted handle 5 years warranty Blade length 1 41 Side width 1 41 1 2 015 020 025 12 1 420 Flat scraper made of tool steel, with painted handle 5 years warranty Haers / Chisels / Centre punches / Scrapers & Removers / Scissors & shears Blade length 1 420 Blade width 1 420 1 175 2 015 017 020 025 1 422 Flat cemented carbide scraper Replaceable cemented carbide blade, 4edged, with polished handle 1 424 Replacement cemented carbide blades suitable for flat scraper No 1 422 Blade width 20 25 30 1 422 1 424 Blade length 1 428 Flat cemented carbide scraper Vshape, with permanently soldered in cemented carbide blade and polished handle 25 25 25 Blade thickness 2 2 2 20 20 20 25 Replaceable cemented carbide blade Overall length 420 470 470 1 424 1 422 Blade width 1 428 Blade thickness 1 428 Vshape 20 5 305 5 years warranty 5 years warranty 97 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

1 432 Halfround scraper made of tool steel, with painted handle 5 years warranty 1 432 Halfround length 1 432 Blade length 1 432 85 85 Threesquare halfround scraper Halfround bearing scraper 1 435 Gasket scraper made of 4square chrome vanadium air hardened steel, blade is forged particularly flat, spatula shape, approx 12 thick, suitable as 3sided scraping blade 1 435 025 Blade width 1 435 Blade length 23 025 1 2 1 438 Plastic window scraper very stable allpurpose scraper with replaceable blade Blade width 0 1 438 1 438 Replacement blade 5 07 035 1 4 Deburring tools with fixed, strong cemented carbide blades, for deburring sheets of steel, aluminium, brass, copper, Nirosta, plastic and moulded compounds, plastic handle, acid and oil resistant, with hand guard, GS = tested safety For material thicknesses 04 5 1 1 4 1 453 Deburring tool with adjustable, replaceable cemented carbide deburring blades, for deburring sheets of steel, aluminium, brass, copper, Nirosta, plastic and moulded compounds, plastic handle, acid and oil resistant, with hand guard, GS = tested safety For material thicknesses 08 5 Replacement deburring blades (per pair) Equipped with blade B/B20 E/E/E300 1 453 1 1 40 Universal handle made of stable plastic, removable blade holder and can be fixed at required length, with quick lock, blade can also be inserted from the side 1 40 135 130 Blade shank 2 32 Blade can also be inserted from the side 1 4 1 4 1 453 1 40 Haers / Chisels / Centre punches / Scrapers & Removers / Scissors & shears Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 977

1 41 Blades for universal handle No 1 40, shank diameter 2 Universal HSS blade, ideal for long chipping material, eg Aluminium, plastic, steel, etc TiN coated HSS blade, with increased hardness and longer tool life Cemented carbide blade for hard steels (from HRc 38) as B, however for lefthanded users Lightweight HSS blade for plastics, long chip Blade ground on both sides for grey cast iron, brass, short chip materials TiN coated blades for longer tool life Cemented carbide blade for hard material, both sides ground, short chip HSS blade for removing external and internal burrs from drillholes in sheet metals and pipes up to 4 thick, for steel and aluminium TiN coated blade for longer tool life Blade ground on both sides for brass and grey cast iron, short chip materials blade ground on both sides for brass and grey cast iron, HSS blade for deburring the rear of difficult to access places up to 20 wall thickness B B TiN B C B LH B 12 B 20 B 20 TiN B 20 C B 30 B 30 TiN B 32 B 0 Illustration 1 41 005 00 008 009 0 012 013 014 01 1 42 Blades for universal handle No 1 40, shank diameter 3,2 Illustration 1 42 Haers / Chisels / Centre punches / Scrapers & Removers / Scissors & shears Universal HSS blade for aluminium, plastic, steel, longchip material TiN coated HSS blade for longer tool life Cemented carbide blade for hard steels (from HRc 38), longchip material HSS blade for lefthanded users For fine, precision work from 18 diameter TiN coated blade for longer tool life Heavy HSS blade for brass, cast iron, plastic, can be used both right and left, short chip material TiN coated blade longer tool life HSS blade for deburring two sides of sheet metals and thin material drill holes HSS blade ground on both sides for brass, cast iron For straight edges, keyways and inner radii HSS blade, deburrs the rear of holes up to 20 wall thickness, 2 Extended version of the E00, for 40 wall thickness, 74 1 44 Deburring tool for blades No 1 42 for heavy duty deburring work, aluminium handle, hexagonal, plastic coated, the blade is fed into a wearproof steel sleeve, easy to change blades Handle Ø 13 1 44 E E TiN E C E LH E 1 E 1 TiN E E TiN E 300 E 320 E 3 E 00 E 01 005 00 007 008 009 011 012 013 014 015 1 5 5 5 1 1 44 ibemo Kazakhstan 090301 Republic = of UNIT Kazakhstan, FOR PURCHASE West OF ONE Kazakhstan PACKAGING UNIT Oblast, PER ORDER Aksai, NUMBER Pramzone, PLEASE ALWAYS BKKS STATE NUMBER office OF complex ITEMS IN ORDER 978 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

1 4 Universal handle for threesquare scraper blades No 1 48, for quality precision work, made of stable plastic, removable blade holder can be fixed at required length Equipped with blade C 40 1 4 1 4 1 48 Threesquare scraper for universal handle No 1 4 1 48 Small HSS threesquare scraper 4 x 20 for quality precision work Large HSS threesquare scraper 8 x 30 C 40 C 42 1 480 Universal handle for countersink No 1 482, for deburring fibres and drill holes, made of stable plastic, removable blade holder can be fixed at required length 1 480 Equipped with countersink F12 1 480 1 482 Countersinks and counterbores for universal handle No 1 480 Screwon 90 HSS countersink Ø 12 Screwon 90 HSS countersink Ø 20 Screwon 90 HSS countersink Ø 30 1 492 Universal deburring sets in plastic case 0 with hard longlife Cobra blades, the Mango adapter B and adapter E provide a sound and secure grip, the Mango handle for deburring, which enables you to finish your work faster, easier and more comfortably 1 492 0 incl 2 x 15 blades Set contents 1 universal handle A 1 holder each type B, C, D, E and F one blade each type B, B20, B30, B, B0, B70, C40, C42, D80, E, E, E300, E3, E00 and F20 Mango handle Adapter B and E 15 BS blades, 15 ES blades F 12 F 20 F 30 1 482 1 492 0 1 492 Haers / Chisels / Centre punches / Scrapers & Removers / Scissors & shears Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 979

Right cutting or left cutting shears What is the difference? Righthand shears are ground and designed to easily cut righthand radii (ie a curve from left to right) Radius cuts from right to left are best made with lefthand shears It is often believed that righthand shears are for righthanded people and lefthand shears are for lefthanded people This is not correct On the contrary If you are righthanded and cut a radius (from left to right) with righthand shears, you cut from your wrist outwards With the lefthand shears (radius then from right to left) from your wrist inwards Which is considerably more ergonomic 1 02 Pattern cutting snips with cantilever action, snips head made of stainless steel, drop forged, with double hardening, selfopening due to integrated spring, PVC coated handles, with antislip protection, cutting capacity: Sheet metals up to 15 thick, V2A and CV material up to 08 5 years warranty 1 04 Combination tinsnips with cantilever action, snips head made of stainless steel, drop forged, with double hardening, selfopening due to integrated spring, PVC coated handles, with antislip protection, cutting capacity: Sheet metals up to 15 thick, V2A and CV material up to 08 5 years warranty 1 02 1 02 Pattern 1 04 Combination 1 04 20 right cutting 20 left cutting Haers / Chisels / Centre punches / Scrapers & Removers / Scissors & shears 1 08 Pattern cutting snips with cantilever action, snips head made of stainless steel, drop forged, with double hardening, selfopening due to integrated spring, ergonomically shaped handles, PVC coated, with antislip protection, cutting capacity: Sheet metals up to 18 thick, stainless steel sheets up to 12 1 Combination tinsnips with cantilever action, snips head made of stainless steel, drop forged, with double hardening, selfopening due to integrated spring, ergonomically shaped handles, PVC coated, with antislip protection, cutting capacity: Sheet metals up to 18 thick, stainless steel sheets up to 12 20 20 20 20 righthand cutting left cutting 1 08 Pattern 1 1 Combination metal snips with cantilever action, HSS tungsten alloy highspeed steel, soldered on blades, blade hardness HRc 4 7, for cutting rust and acid resistant sheet metals such as V2A, CV, Nirosta and other hard sheet metals, increased tool lives, cutting capacity: Sheet metals up to 18, V2A and CV material up to 12 righthand cutting left cutting 1 1 1 Combination 5 years warranty 1 08 1 1 1 980 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

1 18 Metal hoop/strip snips with cantilever action, safety by holding onto the ends of the strip while cutting, snips head made of stainless steel, drop forged, with double hardening, selfopening due to integrated spring, PVC coated handles, with antislip protection for strip widths up to 25 and strip thicknesses up to 0 20 righthand cutting 1 18 5 years warranty Snips head made of stainless steel with holddown 1 18 1 20 Metal hoop/strip snips with holddown, the tapered, flat bottom section can be easily be pushed under the case strip, the hold down prevents the cut strip from shooting up, no risk of injuries, with spring and antislip protection 5 years warranty 1 20 1 20 with holddown 225 righthand cutting 1 24 Tinsnips Berlin shape, stainless steel, with screw, blade hardness HRc 58 0, for cutting sheet steel, rust and acid as well as heat resistant sheet metals (V2A) 5 years warranty 1 24 1 24 2 300 righthand cutting righthand cutting 025 030 1 28 Aviation shears Pelican shape, stainless steel, with screw, blade hardness HRc 58 0, for cutting sheet metals, rust and acid as well as heat resistant sheet metals (V2A) 1 32 Holecutting tinsnips Stainless steel, with screw, blade hardness HRc 58 0, for cutting sheet steel, rust and acid as well as heat resistant sheet metals (V2A), right or leftcutting 2 275 300 righthand cutting righthand cutting righthand cutting 1 32 025 027 030 left cutting left cutting left cutting 1 40 Combination tinsnips Stainless steel, with screw, blade hardness HRc 58 0, for cutting sheet steel, rust and acid as well as heat resistant sheet metals (V2A) 20 280 300 3 righthand cutting righthand cutting righthand cutting righthand cutting 1 40 02 028 1 28 030 035 left cutting left cutting 1 32 125 127 130 1 40 12 128 5 years warranty 5 years warranty 5 years warranty 1 28 1 32 1 40 Haers / Chisels / Centre punches / Scrapers & Removers / Scissors & shears Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 981

1 5 Combination shears Stainless steel, serrated blades, plastic handles designed to match the shape of the hand and shock resistant, with practical fastener, for cutting paper, cardboard, fabric, thin sheet metal, string, leather, plastic, strip metal, etc 1 0 Combination shears like Prod No 1 5; however, angled blades for safe distance from the workpiece 140 185 1 5 1 0 5 years warranty 1 5 1 0 1 4 Jewellers shears Special steel, with open, painted handles, drop forged, bright polished head Straight blade Curved blade 1 4 1 4 1 4 180 180 Straight blade Curved blade Haers / Chisels / Centre punches / Scrapers & Removers / Scissors & shears 1 8 Allpurpose nibbler Notching and chip breaking with one tool For sheet metals up to 12 thick Aluminium, copper, plastic, leather, etc up to 20 thick For round and square cutouts without chip obstruction Surfaces are not deformed With plastic handles and interchangeable blades 25 Replacement blades Replacement female die Replacement spring 115 1 8 1 2 3 1 72 Crown scissors (electronics scissors) nickel plated, with serrated blade, for cutting thin sheet metal up to 04 1 72 1 7 Electricians scissors : Made of special steel, nickel plated With notch and one serrated blade, For cutting thin wires, insulation sleeving, rubber, etc : Very handy With INOX blade Fine toothed and polished With wire cutter Screwed joint Twocomponent handle 130 145 1 7 1 8 1 72 1 7 1 7 982 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

1 80 Paper scissors with long, slender scissors blades, nickel plated 1 2 1 80 000 1 80 1 82 Industrial scissors forged, powerful industrial shape with strong handles and large finger loops, adjustable screw joint, bright scissor blades, tapering to a point, painted handles 1 82 1 82 1 82 2 300 1 83 Industrial scissors with 3 INOX blades and plastic finger loops, ergonomic, hardness 53 HRc 170 240 1 83 017 024 1 85 Hand mitre shears for pinchfree cutting of plastic, rubber and soft wood mouldings, can also be used for flat ribbon cable up to 5 wide replaceable cutting base with fence angle for 45 cuts and markings for 0, 75 and 90 cuts replaceable, standard trapezoidal blade with opening spring and safety latch grip and blade mounting made of special highstrength steel 215 1 85 1 83 017 Replaceable trapezoidal blade 1 82 1 83 024 1 85 Haers / Chisels / Centre punches / Scrapers & Removers / Scissors & shears Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 983

2 00 Metal cutting bench shears, for round and flat steel Basic equipment for metalworking shops, assembly firms, fitters, training workshops and schools, with stable steel body, easy material feed and continuously adjustable holddown, lock bolts for accident prevention 2 008 Replacement top blades 2 0 Replacement bottom blades Sheet metal cutting Round steel cutting Blade length 2 00 2 008 2 0 capacity capacity 2 00 4 11 4 4 4 5 11 1 5 5 5 13 180 2 01 Long blade bench shears for sheet metal ideal for sheet metalworking firms, for vessel making, as well as for metalworking shops, training workshops, steel furniture makers, with stable steel body, easy material feed and continuously adjustable holddown 2 020 Replacement top blades 2 022 Replacement bottom blades 2 01 Sheet metal cutting capacity Round steel cutting capacity Blade length 2 01 2 020 Top blades 2 022 Bottom blades 5 5 5 13 13 13 400 0 290 4 5 4 5 4 5 Bench shears / Hole punches / Vices / Screw clamps 2 02 Metal cutting bench shears, for sheet steel and steel bar for cutting and planing/triing unlimited lengths of sheet steel, stable body, continuously adjustable holddown Sheet metal cutting capacity 8 Sheet metal cutting capacity 8 Round steel cutting capacity 20 Round steel cutting capacity 1 Square steel bar cutting capacity 18 L & T steel section cutting capacity 40 x Flat steel x 9 2 030 Metal cutting bench shears, for sheet steel, steel sections and steel bar robust design for cutting and planing/triing of unlimited lengths of sheet steel, cutting of round, square steel bar, steel angle sections and T section steel Flat steel x 9 2 02 1 2 030 1 2 02 1 2 030 1 984 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

2 090 Bench vices forged from steel, unbreakable, adjustable guides, absolutely parallel clamping, hardened surfaces, hardened side shelf, replaceable vice screw handle with plastic end caps to prevent accidents, with mounting for a pipe jaw, for suitable height adjuster see Prod No 2 094 Jaw width 2 090 Capacity 5 years warranty Weight kg 2 090 125 135 1 175 0 012 013 015 017 125 170 190 205 52 93 140 185 2 2 092 Bench vices with 2 welded in pipe jaws, forged from steel, unbreakable, adjustable guides, absolutely parallel clamping, hardened surfaces, hardened side shelf, replaceable vice screw handle with plastic end caps to prevent accidents, for suitable height adjuster see Prod No 2 094 5 years warranty Jaw width 2 092 Capacity Weight kg 2 092 125 1 175 012 015 017 190 205 93 185 2 with fixed pipe jaws 2 094 Height adjusters for bench vices No 2 090 and 2 092, particularly easy to adjust due to gas spring, 30 rotation, can be locked in any position 5 years warranty For jaw width 125 135 1 2 094 0 012 015 2 095 Swivel base for bench vices, No 2 090 and 2 092, 30 rotation 2 09 Pipe jaw for bench vices, No 2 090 one pipe jaw provides a pipe vice with three point clamping Adjustment range 240 240 240 30 rotatable Weight kg 88 91 94 5 years warranty 2 094 2 095 Bench shears / Hole punches / Vices / Screw clamps For jaw width 125 135 1 175 2 095 Swivel base 0 012 013 015 017 2 09 Pipe jaw 012 013 015 017 2 09 015 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 985

2 Matador bench vices completely forged from steel, guaranteed unbreakable With two mounts for swivelling jaws, hardened anvil, measuring scale for fast preadjustment of the clamping capacity Long, surface hardened guide rail for high precision Round, forged vice base; therefore easier to attach swivel bases and height adjusters Patented adjustable linear guideway ensures tight fitting adjustment even after many years use Long life due to selfadjustment Replaceable vice screw nut, ribbed, surface hardened jaws, fast clamping capacity adjustment due to vice screw with rolled trapezoidal thread and large pitch, double pitch thread 2 Jaw width 2 Capacity For pipe inch Weight kg 140 180 0 012 014 01 018 125 1 225 225 1/8 4 1/8 5 1/8 1/8 7 18 25 2 2 8 Swivel base for Matador bench vice No 2, rotatable through 30, can be locked in any position 2 1 Clamp for directly fixing to a workbench the Matador vice No 2 For jaw width 2 8 Swivel base 2 1 Clamping screw 2 8 140 180 0 012 014 0 012 2 1 2 112 Elevator height adjuster for Matador for ergonomically correct working Mechanical type: continuous height adjustment using stable threaded spindle, the vice can also be rotated through 30 and can be safely locked in any position Automatic type: particularly easy adjustment through weight balancing (with gas spring), vice can be rotated through 30, clamping mechanism enables locking in any position 012 and 112 for jaw width 014 and 114 for jaw width 140 180 for Matador jaw width 140 180 140 + 180 mechanical mechanical automatic automatic automatic Adjustment range Weight kg 13 13 13 13 13 2 112 012 014 112 114 11 2 112 Bench shears / Hole punches / Vices / Screw clamps 2 Pipe jaws Suitable for Matador bench vice 2 Swivelling 012 018: Pipe jaws Only one pipe jaw is necessary to obtain a pipe vice with three point clamping Supplied: singly 112 118: Plastic jaw Supplied: in pairs 212 21: Steel jaw Supplied: in pairs 312 318: Vjaws Supplied: in pairs Jaw width 140 180 2 Pipe 012 014 01 018 2 Plastic 112 114 11 118 2 Steel 212 214 21 2 Vjaws 312 314 31 2 012 018 2 112 118 2 212 21 2 312 31 98 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

2 132 Superior Bench vices with fixed pipe jaws, particularly suitable for installation work and for construction side, the front section can be completely removed (theft prevention!), opens at the front, milled, surface hardened jaws, under which permanently welded on pipe jaws, hardened guideway and concealed screw protected against dirt with double pitch, rolled trapezoidal thread, measuring scale for fast presetting of the clamping capacity, with large, hardened anvil plate for aligning, upsetting and forging work Jaw width 2 132 Capacity For pipe Ø Weight 2 132 with fixed pipe jaws inch kg 140 012 014 01 1 225 3/8 3 1/2 3 1/2 1/2 4 18 25 2 135 Swivel base for Superior bench vice No 2 132, rotatable through 30, can be locked in any position For jaw width 140 2 135 012 014 2 135 2 Bench vice system completely forged from steel guaranteed unbreakable, powder coated with forged on pipe jaws large deep throat clamping facility protected precision spindle bearing easy to adjust central guideway large, guide surfaces machined on all sides ensure precision and long life 112 11: supplied with bolted on, interchangeable jaws 2 Jaw width 2 Capacity approx approx 0 125 012 1 140 014 01 225 180 018 225 2 112 to 2 11 with bolted on and interchangeable jaws 112 1 140 114 11 225 2 13 Replacement jaws Suitable for vice system 2 reversible, with ribbed and smooth working surface, /each For jaw width 140 2 13 012 014 01 Fig shows vice with swivel base 2 15 Pipe external Ø approx 1 30 1 55 27 70 27 27 1 55 27 70 27 Weight kg 45 9 1 27 29 9 1 27 Fig 2 112 11 2 13 Bench shears / Hole punches / Vices / Screw clamps Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 987

2 15 Swivel base for HEUER bench vice system, the vice can be rotated through 30 and fixed in any position 2 17 HEUERLIFT height adjuster improved clamping force thanks to special surface treatment of the vertical tube as well as new type of clamping lug particularly important for trainees in schools and training workshops to prevent serious posture damage during their growth phase Provides real benefits for easier working Effortless and safe height adjustment of vices by, can be rotated through 30 Gas spring matched to the respective vice weight 2 15 2 17 2 17 For jaw width 2 15 Swivel base 2 17 Lift 140 180 0 011 013 015 017 0 011 013 015 017 2 17 Bench shears / Hole punches / Vices / Screw clamps 988 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

2 19 HEUERKLAPPLIFT foldaway height adjuster Apart from the advantage of being able to fold the vice under the bench when it is not being used and therefore making the whole work surface availalbe for other work, the working position of the vice can be adjusted vertically by 180 and rotated through 30, telescopic shock absorbers ensure weight balancing when folding the vice away or up and therefore prevents risk of injuries, powder coated foldaway For jaw width 2 19 140 012 013 2 19 2 180 Bench vices equipped with additional Vjaws, under the normal jaws, robust design, strong type made of cast perlite, precision guiding due to dovetail guideways, large, adequate clamping capacity, hardened, interchangeable and reversible steel jaws, secured by alignment pins and toothed lock washers, reversible rough and smooth side, quill made of steel, breakproof, vice screw with trapezoidal thread Schlegel 2 180 Jaw width 2 180 Capacity Weight kg 125 1 0 012 015 130 180 215 12 21 42 2 189 Spannlift height adjuster for Schlegel vices 2 180, can be adjusted to any required working height and position, 30 rotation, lift height, a gas spring balances the weight of the vice, adjustable using locking lever, fits onto work benches of any height and any work top thickness Supplied without vice Schlegel 30 rotatable For jaw width 2 189 0 125 012 1 015 can also be supplied for other vice makes please state name and jaw width 2 189 2 201 Engineers vices UNISPANN Can be fixed horizontally, vertically, at any angle using the quick action closure if the vice is clamping the workpieces it can be rotated through 30 in the ball joint and simultaneously turned around through 90 Jaw width 4 80 Fixed with Screws Screws 1 2 2 201 Fixed with Clamp Clamp 2 201 Plastic Steel Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 1 2 Capacity 70 1 Reach 35 52 Jaw type Bench shears / Hole punches / Vices / Screw clamps 989

2 205 Pair of jaws for UNISPANN engineers vices No 2 201 Jaw width 4 80 2 205 Plastic 2 2 Pair of vice jaws with retaining spring, does not break off, sit fast on any vice, do not fall off : 015 pressed from lightweight metal, not cast, therefore with smooth surface and dense, uniform microstructure without voids and shrink holes 1 115 made of plastic, a special PE compound tried and tested in numerous workshop trials and which is lighter than lightweight metal 2 205 Aluminium 1 2 2 205 made of lightweight metal 2 2 015 made of plastic Jaw width Lightweight metal 2 2 Plastic 2 2 115 125 135 140 1 005 007 009 011 013 015 1 3 5 7 9 111 113 115 Aluminium 2 2 1 115 2 215 Pair of magnetic vice jaws the integrated special magnets ensure the protective jaws are securely fixed to the vice, the magnetism does not penetrate to the outer surfaces, therefore no attraction of chips and swarf and no magnetising of the workpieces : 0 015 Special aluminium alloy: Hardness between copper and lead, for clamping coarse to mediumfine machined workpieces 1 115 Fibre clamping surface: for clamping workpieces with finely milled or planed and ground or polished surfaces 2 215 Clamping surface made of special synthetic rubber: for clamping thinwalled pipes and shaped parts, wooden and plastic parts 3 315 with Vsurfaces: made of special aluminium alloy, one horizontal vee and three different sized vertical vees for clamping round and oval workpieces, top part of the jaws with 90 routing for clamping flat material Fibre Rubber 2 215 0 015 2 215 1 115 Bench shears / Hole punches / Vices / Screw clamps Jaw width 115 125 135 140 1 Aluminium 2 215 0 011 012 013 014 015 Fibre 2 215 1 111 112 113 114 115 Rubber 2 215 2 211 212 213 214 215 2 222 Foldaway pipe vices completely made of steel, unbreakable hinged, foldaway type with automatically closing union hook drop forged, movable jaw and support jaw, interchangeable Gripping surface milled and hardened Powerful screw with movable T handle Size 2 3 4 2 222 004 For pipe Ø inch 2 3 4 Capacity 0 90 Vees 2 215 3 311 312 313 314 315 kg Weight 43 5 Aluminium V jaws 2 215 2 215 2 215 3 315 2 222 990 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

2 2 Malleable cast iron screw clamps with ergonomically designed 2component triangular handle for maximum force transfer Profile rail ribbed on both sides, zinc coated Fixed and sliding arms made of highquality malleable cast iron Screw with black finish and movable pressure plate as well as soft plastic caps Capacity 2 2 Reach Rail 5 years warranty 2 300 400 400 0 00 800 0 12 10 0 20 0 012 01 020 025 030 040 041 0 00 080 125 1 2 5 80 140 175 15 x 5 22 x 22 x 30 x 8 30 x 8 35 x 9 35 x 9 35 x 11 35 x 11 35 x 11 35 x 11 35 x 11 35 x 11 35 x 11 35 x 11 35 x 11 with 2component handle 2 2 2 3 Malleable cast iron screw clamps Clamping arms made of highquality tempered cast iron Structured safety rail ribbed on both sides, zincplated With power grip With nonslip mechanism, with no affect on loading Pressure plate with integrated screw lock and soft plastic caps Capacity 2 3 Reach Rail 2 300 400 0 00 800 0 12 10 1800 0 20 2 300 400 0 00 800 0 10 012 01 020 025 030 040 0 00 080 125 1 180 2 2 Allsteel screw clamps with ergonomically designed 2component triangular handle for maximum force transfer Fixed arm made of colddrawn structural, sectional steel Sliding arm drop forged, tempered and hardened, zinc plated Screw with black finish and movable pressure plate Capacity 2 0 012 01 020 025 030 040 0 00 080 1 5 80 140 175 Reach 0 80 140 22 x 22 x 30 x 8 30 x 8 35 x 9 35 x 9 35 x 11 35 x 11 35 x 11 35 x 11 35 x 11 35 x 11 35 x 11 35 x 11 35 x 11 5 years warranty Rail 115 x 57 135 x 5 1 x 75 195 x 95 22 x 5 25 x 12 25 x 12 25 x 12 25 x 12 27 x 13 27 x 13 27 x 13 with 2component handle 2 3 2 Bench shears / Hole punches / Vices / Screw clamps Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 991

2 5 Deep throat screw clamps with T handle, clamping arms made of highquality malleable cast iron, both sides of full rail are ribbed, black finish screw, pushthrough T handle, screw with movable pressure plate Capacity 300 400 400 0 400 0 00 400 0 00 800 0 2 5 030 040 140 1 240 2 20 340 3 30 380 400 Reach 2 2 300 300 300 400 400 400 400 400 5 years warranty Rail 35 x 11 35 x 11 43 x 43 x 45 x 12 45 x 12 45 x 12 45 x 12 45 x 12 45 x 12 45 x 12 45 x 12 2 5 2 51 Allsteel screw clamps with T handle, fixed and sliding arms made of special steel, forged, hardened and tempered and completely zinc plated, strict quality testing of the strength and safety against failure, hardened and bonderised screw, special pressure plate, easy to replace, hexagon at end of screw 5 years warranty Capacity 2 300 0 800 0 10 2 51 025 030 0 080 1 Reach 140 140 140 Rail 30 x 15 30 x 15 30 x 15 30 x 15 30 x 15 30 x 15 2 51 2 520 Allsteel screw clamps with T handle, heavyduty type, with stronger rail and larger throat, fixed and sliding arms made of special steel, forged, hardened and tempered and completely zinc plated, strict quality testing of the strength and safety against failure, hardened and bonderised screw, special pressure plate, easy to replace, hexagon at end of screw 5 years warranty heavyduty type with larger throat Capacity 2 520 Reach Rail 2 520 Bench shears / Hole punches / Vices / Screw clamps 300 400 0 00 800 0 030 040 0 00 080 175 175 175 175 175 175 2 524 Allsteel quick action lever clamps with swivelling pressure plate made of steel, electroplated with zinc, sliding arm with 7 latching positions, tempered and hardened tappet, plastic coated locking and release pawl, as well as clamping lever; the lever enables clamping effects such as those achieved with screw clamps to be achieved in seconds, and opens again just as fast with the release pawl, the latched position enables repeatable clamping with the same depth Capacity 2 300 400 00 2 524 01 020 025 030 040 00 Reach 80 140 40 x 20 40 x 20 40 x 20 40 x 20 40 x 20 40 x 20 Rail 1 x 75 195 x 95 22 x 5 25 x 12 25 x 12 25 x 12 with practical clamping lever for fast release and clamping 2 524 01 992 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

2 Wooden clamps made of soft beechwood, zinc plated steel rail, with tappet, pressure surfaces with cork facing Capacity 400 00 800 2 020 040 00 080 Reach 1 1 1 1 2 2 584 Toolmakers clamps made of steel, parallel adjustment using 2 threaded screws with 2 threaded screws Capacity 2 584 Jaw length 28 40 55 70 028 040 055 070 0 75 135 2 584 2 588 Steel C clamps drop forged, with T handle, made of SM steel with to 0 kg strength, screw with trapezoidal thread, black finish Capacity 2 588 Reach 0 90 125 00 090 125 0 90 2 588 00 9 020 Workpiece clamps with malleable cast iron arms and T handle, with connecting eyelet for electric welding cable, black finish screw with movable spherical pressure plate Reach Rail For current intensity 9 020 A 70 ca 20 x 5 1 ca 25 x 400 3 80 ca 28 x 8 00 5 2 04 Mitre and corner clamps Malleable cast iron body and jaws, electroplated zinc coating, screw with trapezoidal thread, copper plated, for fixing components at rightangles to each other, including components with different thicknesses Through hole max 0 Max capacity 90 2 04 00 Jaw length 1 2 04 Jaw height 35 1 9 020 Bench shears / Hole punches / Vices / Screw clamps Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 993

Bench shears / Hole punches / Vices / Screw clamps 2 08 Quick clamps KANT TWIST Arms made of cold rolled, bright, temperable CK 0 steel with 5 kg strength, screw with V thread, therefore greater retention reliability, this tool weighs only half as much as a normal clamp but has 40% greater capacity, handtightening suffices, solid design, no loose parts, closes onto any workpiece thickness within seconds, no overtightening, no gripping surface slippage Capacity 25 75 1 1 130 145 180 2 08 004 00 Jaw width 40 45 42 52 58 0 5 2 20 0 012 013 014 01 018 020 Clamping depth when open 15 35 35 0 0 2 20 Hand filing vice/pin vice made of C 35 steel, drop forged, with wide jaws and wing nuts, movable, easy to replace screw with trapezoidal thread and washer, hinged guideway, captive round steel spreader spring, vee cut in jaw surface for clamping round parts 2 22 Machine filing vice/pin vice with hexagon nut and key, made of C 35 steel, drop forged, for the highest loads, movable, easy to replace screw with trapezoidal thread and washer, hinged guideway, captive round steel spreader spring, vee cut in the surface of the jaws for clamping round parts 180 2 Jaw width 5 70 80 90 2 22 01 018 020 025 2 2 Tapered filing vice/pin vice with wing nut, made of C35 steel, drop forged Jaw width 13 2 2 012 Clamping depth when closed 17 40 75 85 The original! Pressure face width 8 12 1 22 22 Capacity 18 22 25 28 35 40 45 Capacity 40 40 0 Capacity 20 2 08 2 20 0 2 22 2 2 012 994 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

2 28 Vice jaws drop forged, with 45 slanted jaws 125 1 Jaw width 30 40 2 28 012 015 Capacity 30 35 2 28 2 3 Tool holder with 2 interchangeable collet chucks and grooved surface brass handle with square head Clamping range 2 3 2 3 0 25 0 4 90 1 2 40 Tool holder completely made of brass, nickel plated and drilled through Clamping range 2 40 0 1 1 2 80 80 2 40 For dial indicators and gauges see from Page 55 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom Bench shears / Hole punches / Vices / Screw clamps 995

3 004 Expander set with expander tongs, expander heads and interior/exterior milling cutter, in portable steel container Pipe Ø 12 15 18 22 3 004 3 004 3 005 Expander tongs for copper tube expansion; these tongs combine all sizes in one device no more lost parts or missing sizes! The individual segments are made of highalloy hardened steel 3 005 For pipe Ø 12 15 18 22 28 3 005 3 012 Pipe bender / vice Matador Multi Plus The Matador Multi Plus can be used both as a traditional parallel vice for mounting work pieces and, additionally, as a tool for bending stainless steel, hydraulic and gas pipes without excessive force can be used for straightening or bending of construction steel such as flatrolled steel, Ushaped beams, etc jaw width opening of jaws 225 includes steel bending dies 15 18 22, straightening tool and two counterholders with fastening bolts Capacity bends up to 28 thin wall stainless steel pipe straightening and bending with up to 30 kn forming force Jaw width 3 012 01 3 012 01 Plumbing tools 99 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

3 020 Bending tongs sets for bending of nonferrous metals and copper; bending tongs complete with bending sets in portable steel container Pipe Ø 475/5 8 8 12 3 020 3 020 3 024 Bending tongs DIN EN 57, bends up to 180, copper tubes and all other nonferrous metal pipes, also thin wall precision steel pipes and brake pipes, nickel plate bends up to 180 3 024 00 Pipe Ø 3 024 Radius 8 00 008 0 275 340 400 18 28 28 3 02 Manual bending device for pipes from 1, bends up to 180, bends bare and insulated copper tubes (eg WICU etc) DIN EN 57 and other pipes from nonferrous metals as well as thin wall, seamless precision steel pipes, blue stove enamelled 3 02 Name Bender lever manual lever 90 manual lever 180 Stationary die holders Bending die Bending die Bending die Bending die Bending die Bending die Bending die 3 02 004 00 008 0 012 014 015 01 Pipe Ø 8 12 14 15 1 Bending radius 28 28 35 35 45 45 45 3 02 3 02 004 3 02 00 01 3 028 Manual bending device sets Design as 3 02, complete in sheet steel container The pipe benders can either be operated hands free with the manual levers 3 02 and, or they can be mounted on the vice with die holder 3 02 004 Set contents 3 028 1 bender lever, 1 manual lever 90, 1 manual lever 180, 1 stationary die holder, 1 die each for pipe Ø 8 12 14 15, 1 pipe cutter 1 bender lever, 1 manual lever 90, 1 die each for pipe Ø 8 12 15 3 028 3 035 Hydraulic pipe bender for pipes with 15 54 diameters, manual hydraulic, consisting of pump, base plate with post, openended spanner 17 x 19, without bending dies, for copper tubes, steel pipes, precision steel pipes, hydraulic and conduit pipes, bare and encased pipes and others, 90 bends, blue paint, packed in tool box Compressive force kn 3 035 3 035 Plumbing tools Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 997

3 03 Bending dies with sliding rail and pipe clamp, for pipe bender 3 035 Pipe Ø 3 03 Precision pipe 18 018 18 20 020 20 22 022 22 22 023 24 024 25 025 25 28 028 28 28 029 30 030 30 32 032 32 34 034 35 035 35 35 03 38 038 38 42 042 42 *conversion kit required for bending radius 5 encased 14 1 18 28 Copper pipe 18 22 28 35 WICU 18 Bending radius 85 85 85 85 85 85 85 85 1 1 1 3 03 Hydraulic pipe bending machines 1manual hydraulic, for gas and water pipes according to DIN 2440/2441, seamless steel pipes according to DIN 2448 and railing pipes blue paint, packed in tool box corresponding work stand 3 045 3 041 Hydraulic pipe bender with foldable bending frame, without bending dies foldable open 3 042 Hydraulic pipe bender with open bending frame, without bending dies 3 041 3 042 Bending range inch 3 041 3 042 Compressive force up to kn tool box 3/8 2 8 x 370 x 370 3 043 Bending dies made of grey cast iron, for hydraulic pipe benders 3 041 and 3 042 Pipe Ø inch 3 043 Bending radius 3/8 1/2 3/4 1 1 1/4 1 1/2 2 004 005 00 007 45 75 115 1 3 043 3 045 work and mounting stand For pipe bending machines No 3 041 3 042 3 045 rotating 3 045 3 051 Flaring tool for flaring of pipes made of copper and lightweight metal with various material hardness; clamping jaws with smooth inner surface; cast zinc body, silver stove enamelled; steel clamping jaws, phosphatised; opening angle 90 = 45 bending angle Plumbing tools 3 053 Flaring tool set complete with basic body, clamping jaws, flare cone 180 and pipe cutter, in sheet steel case Pipe Ø 4 475 8 12 15 3 051 3 053 3 053 3 051 998 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

3 057 Double flaring tool set complete for brake lines, coolant pipes, hydraulics and pneumatics; body made of malleable cast iron GTW 40, blue ovenenamelled; steel clamping jaws, phosphatised, in metal sheet case Scope of supply Qty 1 1 1 1 1 1 Pipe Ø Body 475 5 8 9 Clamping jaw, metric Flare cones for E (open) and F (double) flares DIN 74234 Flare cones for D and E flares and adapter for 90 Setting gauge for E and F flares and flare cone 180 Mini pipe cutter Deburrer Wall thickness 07 / 1 3 057 3 057 3 085 Internal and external deburrer for quick and easy deburring of copper, aluminium and soft steel pipes Pipe Ø Pipe Ø inch 3 085 4 42 1/8 1 3/8 3 085 3 09 Plastic cutting tool made from cast aluminium, with ground knife blade for PVC pipes, hoses, and textile reinforced hoses Pipe Ø 3 09 with ground knife blade 3 09 35 3 098 Universal plastic pipe shears for exact rightangled cutting of composite and plastic pipes with diameters from 12 to 25 clean, smooth and burrfree cut surfaces safe cutting of fluted protection pipes on the outside diameter, without damage to the interior conduit pipe small cutting angles (90 ) provide effortless cutting of the protection pipe even during installation option to attach a sizing mandril, eg for Geberit pipes Ø 115 and 15 calibrating and chamfering of composite pipe end for troublefree installation replaceable knife blades ergonomically formed twocomponenthandles 3 098 021 3 098 Cutting performance for composite pipes Cutting performance for protection pipes Weight g 2 021 1 12 25 18 35 Replacement knife blades 320 3 Ratchet plastic pipe shears for composite and plastic pipes Ø 2 40 automatic pipe support adjustment for exact burrfree cutting operates using the ratchet principle high safety standard automatic blade adjustment for the respective pipe diameter avoids empty return strokes compact design easy handling 2 3 021 1 Cutting capacity Weight g 2 40 45 Replacement knife blades 3 021 Plumbing tools Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 999

3 00 Pipe cutter Robust metal body with guide rollers, universal use for pipes made of copper, brass, lightweight metal, PVC hard plastic, replacement rollers in handle 07: especially for thinwalled metal pipes 04 and 08: especially for steel pipes 035, 045 and 04: with retractable manual deburrer 07 and 08: with quick adjustment 5 years warranty 3 00 030 3 00 035 3 00 045 3 00 07 3 00 04 3 00 08 especially for INOX especially for INOX For pipe Ø 3 00 For pipe Ø Quantity of inch guide rollers 3 30 3 35 3 45 3 45 7 7 030 035 045 04 07 08 1/8 1 1/8 1/8 1 3/8 1/8 1 3/4 1/8 1 3/4 1/8 2 5/8 1/8 2 5/8 2 4 4 4 4 4 3 02 Replacement cutting wheels suitable for pipe cutter 3 00 suitable for cutting the following materials: aluminium, copper, VA, plastic, steel 5 years warranty 005 007 013 015 017 Ø 3 02 Suitable for 3 00 Purpose Bore 19 x 5 19 x 2 2 x 2 005 0345 07 07 Universal Universal Plastic / Composites 22 x 5 007 0345 Plastic 19 x 2 013 07 ALU, CU 19 x 5 015 04 INOX 19 x 2 017 08 INOX 0 485 485 0 485 0 485 3 09 Steel pipe cutter for steel pipes made of highalloy malleable cast iron, with one cutting wheel and two guide rollers, chrome plated spindle The cutting wheels special cutting geometry ensures fast piping work without external or internal burrs 3 071 Replacement cutting wheels for pipe cutter No 3 09 Plumbing tools For pipe Ø inch 1/8 2 1 1/4 4 3 09 004 3 071 004 Cutting wheel Ø 32 40 3 071 3 09 0 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

Ratchet Filling blocks for tapping for pipe thread according to DIN 2999 tapered 1:1 right, with quick change cutting heads and ratchet lever, reversible with right and lefthand motion, with twopiece tubular arm, secure locking of the cutting head in the ratchet lever, no sudden slipping of ratchet off the cutting head, and therefore no danger of injuries, compliance with GS standard (geprüfte Sicherheit = tested safety) 3 1 Filling blocks for tapping complete with sheet steel portable case, including cutting heads and ratchet lever, No 009 with two ratchet levers 3 1 Size C 1 1/4 C 1 1/4 C 1 1/4 + C 2 3 1 005 007 009 for pipe threads inch R 3/8 1/2 3/4 1 1 1/4 R 1/2 3/4 1 1 1/4 R 1/2 3/4 1 1 1/4 1 1/2 2 3 3 Ratchet lever with arm 3 5 Portable cases, empty 3 3 Size 3 3 3 5 for cutting heads Number of cutting heads inch C 1 1/4 C 2 R 1/8 1 1/4 R 1/8 2 7 9 3 5 3 7 Cutting heads with jaws 3 9 Replacement jaws Set = 4 pieces, for cutting heads No 3 7 Size C 1 1/4 C 1 1/4 C 1 1/4 C 1 1/4 C 1 1/4 C 1 1/4 C 1 1/4 C 2 C 2 3 7 Cutting heads 004 005 00 007 008 009 3 9 Replacement jaws 004 005 00 007 008 009 for pipe threads inch R 1/8 R 1/4 R 3/8 R 1/2 R 3/4 R 1 R 1 1/4 R 1 1/2 R 2 3 7 3 9 Plumbing tools Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 1

3 118 Pressing tongs Attachments for ROLLER S pressing tongs with precisely incorporated and exactly rounded, systemspecific pressing contour corresponding to the respective pressfitting system For perfect secure pressing with confirmed system conformity The pressing tongs are drop forged and specially hardened to meet the highest quality standards and ensure long life ROLLER S pressing tongs can be used with all ROLLER S radial presses and any other suitable drive units of other makes GS mark (geprüfte Sicherheit = tested safety) certified by an independent certification body 0: UniPress E BasicPack: Drive unit, in sheet steel case Only one universal drive unit for: ROLLER s pressing tong attachments with systemspecific pressing contour corresponding to the respective pressfitting system, for perfect secure compression with confirmed systemconformity Pressing tongs of various other manufacturers/makes Pressing rings of various other manufacturers/makes Compact, slim design, favourable weight, drive unit only 44 kg Perfect compression is ensured after complete closing of pressing tongs The pressing tongs remain closed until reversed to return This feature ensures perfect visual control of the correct pressing process Robust, powerful, electromechanical drive with maintenancefree reducing gear and safety slip clutch Tried and tested, high performance 1~ universal motor 230 V, 0 Hz, 4 W Right and lefthand rotation, safety holdtorun control device Constant thrust for continuous secure pressing Automatic locking ensures secure fit of pressing tongs Complete range of ROLLER S pressing tong attachments for all coon pressfitting systems, on request 0: MultiPress BasicPack: Drive unit with disabling signal, rechargeable battery 12 V, quick charger, in sheet steel case Compact design, perfect weight distribution for real onehand operation, favourable weight, drive unit with rechargeable battery only 45 kg Tried and tested, high performance 12 V motor with rechargeable battery, 2 W, safety holdtorun control device Rechargeable battery 12 V, 20 Ah performance, for many pressing applications, even with large pipe dimensions Power supply 230 V (accessory) instead of rechargeable battery 12 V Quick charger for short charging time (1 h), pulse charging technology for reduced memory effect and maximum battery performance 3 118 0 3 118 0 3 118 230 V / 4 W 12 V / 2 W 0 0 UniPress E BasicPack MultiPress BasicPack 3 119 Pressing tong attachments for pressing tongs 3 118 For system: Viega profipress, profipress G, profipress THERM, sanpress, sanpress INOX Pressing tongs For pipe Ø 3 119 V12 12 012 V15 15 015 V18 18 018 V22 22 022 V28 28 028 V35 35 035 V42 42 042 V54 54 054 Further sizes available on request 3 119 Plumbing tools 1 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

3 123 Electric pipe benders Model Arco for hard, semihard and soft copper tubes from 35 Ø stainless steel pipes from 12 28 Ø electrical installation conduit to DIN EN 08 from 1 32 Ø composite pipes from 14 40 Ø for cool bending of hard and soft pipes 180 compact, easy to transport continuously adjustable speed control maintenance free, robust gearbox high performance universal motor with 0 Watts Right and lefthand operation safety holdtorun control device : machine holder, heightadjustable 3 123 Arco set consisting of 3 123 drive unit lock pins bending dies sliders in sheet steel case machine holder, heightadjustable 3 123 Fig shows pipe bender with machine holder 3 133 Thread roughing tool for efficient roughing of threads for hemp or Teflon sealing, timesaving, after manual or machine tapping, even, gentle toughing over the full radius of the thread, with hardened rollers 3 133 Pipe Ø inch 3/8 2 3 133 3 140 Hemp seal High quality, easy to measure and work up to the last fibre Can be used to seal metal threaded connections used in domestic installation such as cold and hot water systems, heat and natural gas systems Weight g approx 3 140 3 140 3 201 Pipe wrench 90 Swedish model, made of special hardened steel, drop forged, with wide, 90 angled jaws, fluted handle, captive nut with pinchprotection 3 201 For pipes inch 3 201 Capacity 1 1 1/2 2 3 4 004 005 42 59 7 129 300 4 85 815 3 204 Pipe wrench 90 Swedish design, painted, with wide, 90 angled jaw, handy handle and captive nut, made of chrome vanadium steel, drop forged 5 years For pipes inch 1 1 1/2 2 3 204 Capacity 45 4 80 warranty 3 4 3 204 Plumbing tools Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 3

3 20 Corner pipe wrenches 45 Swedish design, made of chrome vanadium steel, with narrow, 45 angled jaw, curved handle, captive nut with pinchprotection For pipes inch 1/2 1 1 1/2 2 3 3 20 004 005 Capacity 29 45 59 7 2 240 320 445 55 705 3 20 3 208 Corner pipe wrenches 45 Swedish design, made of chrome vanadium steel, drop forged, painted, with narrow, 45 angled jaw, handy handle and captive nut 5 years warranty 3 208 For pipes inch 3 208 Capacity 1 1 1/2 2 45 4 80 3 4 3 2 Corner pipe wrenches Stype Swedish design, with threepoint support, made of chrome vanadium steel, drop forged, completely tempered, teeth additionally flamehardened, with narrow 45 angled jaw and captive nut 3 2 011 For pipes inch 3 2 Capacity 1/2 1 1 1/2 2 3 011 012 013 014 015 35 48 0 80 1 245 320 420 5 30 3 217 Corner pipe wrenches Stype Swedish design, made of chrome vanadium steel, drop forged, hardened and tempered, painted, with narrow, 45 angled jaw, handy handle and captive nut, the Stype jaw ensures safe grip at each angle, even for angular or edged material 5 years warranty 3 217 For pipes inch 3 217 Capacity 1 1 1/2 2 45 0 80 320 420 540 3 219 Onehand pipe wrenches High strength Monoblock cast iron body, with double Tprofile, forged jaws and hooks, finely ground, teeth cut against direction of rotation, inductionhardened, hardened and tempered, handy adjustment screw, replaceable jaws and hooks 3 219 3 220 Onehand aluminium pipe wrenches Weight savings of approx 40 %, Monoblock cast body made of extremely lightweight, high strength aluminium alloy, otherwise same design as No 3 219 made of aluminium approx 40 % less weight Plumbing tools For pipes inch 2 3 5 3 219 005 00 Weight kg 1 4 87 15 3 220 Alu 005 00 Weight kg 11 27 84 Jaw opening 0 90 140 18 Overall length 3 00 900 1 3 220 4 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

3 22 Chain pipe wrench Mini with double teeth cut, ratchetstyle handling in every direction, the flexible chain adjusts to round, rectangular or uneven crosssections Drop forged handle made of hardened and tempered chrome vanadium steel, hardened chain for pipes inch 1 to 4 3 22 340 Chain length 490 5 years warranty 3 22 3 231 Chain pipe wrenches heavyduty type doublesided toothed, hardened, drop forged jaws, with solid lever handle and special pipe wrench chain Painted lever handle and jaws 3 231 for pipes inch 3 231 Chain length up to 2 up to 3 up to 4 1 1 8 2 12 004 005 00 5 700 920 80 1280 1 370 470 590 830 90 1420 3 242 Strap wrench with drawn profiled shank and nonslip rubberfabric strap, handle bright nickel plated and plastic dip insulated 3 243 Replacement straps for strap wrench 3 242 complete with rivets 3 242 For Ø up to 3 242 3 243 Strap width 140 240 Strap wrenches Replacement straps 22 25 3 243 3 24 Safety wrench Releases stubborn fittings in no time, slipproof to use, work optimising and time saving, with rubber handle and extension protection Also available in nonsparking design: see product No 59 80 3 24 DN 25 80 125 2 3 24 280 340 4 3 304 Pliers with replaceable special plastic jaws, ovenenamelled, made of highalloy malleable cast iron, for safe, damagefree gripping and holding of pipes Capacity 1 3 304 300 Replaceable plastic jaws 3 304 Plumbing tools Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 5

3 30 Pipe pliers with protective jaws (pipe gripping pliers, connector pliers) ideal for tightening and loosening of plastic pipe connections, round union nut etc up to Ø 0 with toothed jaws 4way adjustable box slip joint chrome Vanadin electric steel, hardened in oil and tempered pliers chrome plated, plastic coated handles 1 plastic jaws, supplied in pairs 3 30 Ø 25 0 Plastic jaw 3 30 1 230 /pair 3 308 Water cock nut pliers made of quality steel, forge dropped and painted, head with internal square, arms with adjusting screw, can be used for spanner sizes (AF) 133 270 3 308 3 308 3 3 Water cock nut pliers made of chrome vanadium steel, with swivelling claw for right and lefthand rotation, painted 5 years warranty 3 3 235 3 3 3 311 Plier wrench Pliers and spanner in one tool, continuously quickly adjustable directly on the workpiece, for gentle installation of workpieces with sensitive surfaces, also ideally suited for gripping, holding and bending of workpieces, 018 030 nickel plated surface, plastic coated handles, 118 125 nickel plated, handles with twocoloured multicomponent sheathing 3 311 018 030 3 311 118 125 Max capacity 3 311 3 311 35 4 0 018 025 030 118 125 180 2 300 3 312 Fitting spanner with lever suspension, made of chrome vanadium steel, hardened, burnished, with replaceable plastic jaws to protect chrome plated workpieces 3 312 Capacity 3 312 Jaw length 5 275 45 Plumbing tools Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

3 314 Quickaction fitting spanners, FixoSpann with lever suspension and replaceable brass protective jaws, made of chrome manganese steel, for nickel plated and chrome plated fittings Capacity 5 3 314 290 Jaw length 45 3 314 3 320 Fitting pliers with straight, smooth jaws and replaceable plastic inserts made of polyamide, pin lock, made of chrome vanadium steel, forged, painted, especially for damagefree installation of chrome plated fittings 3 320 Capacity 3 320 315 3 32 Combination radiator spud wrench made of special steel, forged, with Thandle for nipple, for cam, hexagon, bihexagon catching for installation and deinstallation of radiator valves, reverse thread joints and tap extensions Dimensions inch 3/8 1/2 3/4 3 32 3 32 3 328 Combination radiator spud wrench made of special steel, forged, for cam, hexagon, bihexagon catching, for installation and deinstallation of radiator valves, reverse thread joints and short tap extensions Dimensions inch 3 328 3/8 1 Ratchet with 1/2 square drive for radiator sput wrench see No 53 780 020 Square drive Zoll 1/2 3 328 3 330 Radiator spud wrench for installation and deinstallation of valve nipples, steel forged, with 18 square drive for tap wrench 3 332 3 330 For nipple inch 3/8 1/2 3/4 1 1 1/4 240 3 330 3 332 Tap wrench with 18 square drive, for radiator spud wrench and radiator nipple wrench 3 332 3 332 3 334 Fourway spanner Size 220 x 220 for tap extension, with sizes / 12 / 17 / 22 hexagon catching and 3/8 1 cam catching, for screwing in and out of radiator and reverse thread joints, for hanger bolts interior thread M and M 12 with hardened impact socket, for pipe end caps 3/8 and square drive in hexagon AF 17 and AF 22 Dimensions inch 3/8 1 Dimensions M M M 12 Dimensions AF 12 17 22 3 334 3 334 Plumbing tools Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 7

3 338 Tap extension Allen wrench made of chrome vanadium steel, bright nickel plated Leg length 130 x 95 3 338 For extensions inch 1/2 and 3/4 Socket size 12 and 17 3 338 3 348 Water tap reseating tool with stepped, cylindrical receiver tap for various tap sizes and replaceable flat milling cutters, in sheet metal case For valve inlet nozzles inch 3/8 1/2 3/4 1 3 348 3 348 3 3 Replacement milling cutters for water tap reseating tool No 3 348 For tap size inch 3/8 1/2 3 3 Milling cutter Ø 14 17 3 3 3 358 Plumber s hand seamers with lapjoint, drop forged, burnished, jaw width 0 3 358 3 358 3 358 3 358 straight 45 bent 90 bent 280 280 280 3 32 Gutter bending pliers with iron tube arms and solid joint head Wall thickness 3 32 3 32 40 x 0 Plumbing tools 91 540 Welding and control mirror nickel plated steel wire with holding bracket and ball joint, mirror made of iron, nickel plated Mirror size 80 x 72 x 1 91 540 1 91 540 1 8 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

91 540 Magnetic welding and control mirror with rectangular metal mirror and highperformance magnets for secure adhesion, pole shoes on one side with prism soles for pipes and rounded ends, and on the other side with planar sole for flat surfaces Flexible spiral holder and selflocking, full rotation ball joint allows onehand adjustment and free movement around any obstacles Mirror made of iron, nickel plated 91 540 1 91 540 121 Mirror size 91 540 Clamping force kp 91 540 Replacement mirror 80 x 72 x 1 111 40 121 3 2 Drain and pipe snake hotdip galvanised, with strong ball, twopronged head and adjustable wooden handle with locking screw, for cleaning of toilet drains For pipes up to Ø 3 2 Wire cable Ø Wire cable length m 40 7 5 3 4 Drain and pipe snakes hotdip galvanised, with exchangeable turning handle and worm screw, connection thread 1/2 3 2 3 5 Extension snakes for connecting to drain and pipe snakes : 5 m For pipe Ø 3 4 3 5 Wire cable Ø Wire cable length m 40 70 40 70 0 0 004 12 12 5 5 3 4 3 Spare parts for drain and pipe snakes 3 3 3 004 Name Threepronged head Boring head Worm screw 3 004 Ø 30 40 55 Wire cable Ø 12 12 3 8 Drain and pipe cleaning tool the snake is positioned in a protective, breakproof and impact resistant casing made of strong plastic material, supplied complete with standard head For drains and pipes inch 3/4 2 Replacement snake with standard head 3 8 Wire cable Ø 8 Wire cable length m 75 3 8 3 512 Sink plungers Cup made of especially strong solid rubber, with wood handle Best Quality Cup Ø 135 3 512 013 3 512 013 Plumbing tools Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 9

4 Blacksmith s pliers Flat jaws, forged, with laidon joint, painted 4 For material 4 300 400 0 00 030 040 0 00 1 4 8 13 14 17 18 4 018 Cold chisel with ash shaft, DIN 57, forged, ground on all sides, painted black, head and cutting edges bright, made of special chisel steel with ash shaft Weight g 4 018 Shaft length 4 018 180 380 4 022 Hardie forged, ground on all sides, painted black, bright cutting edges, made of special steel Weight g 11 4 022 Top pin thickness 25 x 25 Striking face width 4 022 Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps 4 04 Hardie hole punch with ash shaft, DIN 5253, round, forged from special steel, black Ø 15 20 4 04 0 015 020 Weight g 1 135 1835 4 053 Standard anvil drop forged, with 2 beaks and hardened striking face, bright work surface, the rest is painted black, size 12 supplied with heel as a standard, all dimensions and weights quoted subject to differences of ± % Size 5 9 12 4 053 005 009 012 Weight approx kg 35 75 125 Striking face Striking face width length approx approx 95 125 130 205 25 300 Shaft length 380 380 380 Beak length Overall approx length 135 475 185 35 2 720 with ash shaft 4 04 4 053 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

4 058 Anvil base portable, suitable for anvils No 4 053, stable welded construction, laminated wood insert, handles for easy transport, the base is filled with sand for maximum stability and to reduce noise, anvil can be chocked with wedges from the side Height 4 058 Base area Weight kg 5 380 x 40 4 4 058 4 080 Angle bender Karnasch Body made of nodular cast iron, no grey cast iron, for this reason maximum bending capacity is achieved despite the machine s low selfweight Built on angle stop By using high quality CO steel for the bending jaws, it is possible to keep them small in size and therefore enables very tight Z and U bends to be achieved Cold bending and hot bending can be carried out with the normal accessories Bending capacities: Bends cold, flat copper max x 12, angle sections notched max 0 x 8, bends hot angle sections, notched max x 12 THE DECISIVE ADVANTAGE Spindle head No3 is located above the bending plane, therefore free bending to Z This is only possible with a Karnasch bender The eccentric clamping lever No1 has a double action, not single, it therefore always clamps safely in any clamping position 1 3 7 2 Base area 205 x 175 4 080 8 1 Selflocking eccentric clamping 2 Particularly narrow pressure plate 3 Powerful spindle head 4 Bending lever 5 Angle stop infinitely adjustable from 0º, pinning holes instead of grooves into which the stop slips Recessed bending jaws made of CO steel 7 By using breakproof nodular cast iron with small dimensions, tight bends can be achieved 8 wise stop, sharpedged jaw for sheet metal, Allen keys are standard accessories 9 The basic body is also made from high quality nodular cast iron Total width approx 290 approx 20 9 Operating lever approx 7x40x12 Allen key SW 8 5 4 Bending plane the bending lever is located under the bending plane and is therefore not in the way wise stop 440 Weight approx kg 24 Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 11

Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps 4 4 Test hand pump a complete, ready to use unit with drain valve, suction hose and 2 m pressure hose, mounted on a hotdip galvanized VA tank 0 x 180 x, all parts in contact with liquid are made from cast aluminium, intended use: for testing pipes, boilers or cylinders, as backup unit in case of hydraulics failure or as a travel test pump Motor driven test pumps available on request Piston Ø 20 Piston Ø 30 + 1 Weight kg 15 20 4 4 4 8 Piston stroke 4 8 Pipe and boiler test pumps the pumps are mounted on a hotdip galvanised, oval container 430 x 3 x 330, with drain valve, Bourdon tube and pressure hose, 1/2, bar, 3 m long, with single piston, for testing moulded parts with small volume, with doublepiston system concentric arrangement, for pressure testing containers and pipes as well as accessories Motor driven test pumps available on request 4 144 Lever cylinder barrel pumps Pumped media: Heating oil, diesel, petroleum Seal materials: NBR Use in:, for 0 I / I / 220 I Use: for filling measuring buckets, measuring beakers, storage cans, canisters and for refuelling Long suction tube: 1 Barrel coupling: G 2 a and M 4 x 4a Pump body: impactresistant zinc die casting Paint colour: silver Dimensions LBH (): 590 x x 90 Output l/min 12 18 4 144 30 Piston stroke 40 40 Hose length cm 4 148 Vanetype barrel pump Pumped media: Heating oil, diesel, petroleum Seal material: NBR Delivery rate (l/min): 15 Use in:, for / 220 l Use: for filling measuring buckets, measuring beakers, storage cans, canisters and for refuelling Long suction tube: 920 Suction tube Ø: 3/4 Discharge: Steel outlet elbow or via delivery hose, with steel outlet Barrel coupling: G 2 Pump body: Cast steel Paint colour: Pantone 294c, blue satin matt Dimensions LBH (): x 1 x 170 Handle, made of wood Suction tube, steel outlet, barrel coupling, delivery hose, NBR, Ø 325, length = 0 Output with 1 m suction height l/min 15 4 148 Weight kg 8 Operating pressure bar 0 Operating pressure bar 0 Iersion depth cm Pipe connection intake and discharge side G 1/2 Weight kg 11 14 4 4 4 8 4 8 4 144 4 148 12 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

4 201 Standard oiler the stable, resilient can be supplied in aluminium or polyethylene, the true to gauge workmanship ensures firstclass function and high pressure effect of the metal pump mechanism, a brass guide actuates the seal and guides the pull rod, the intake piston is located in a favourable oblique positioned, all valve springs are made of phosphorous bronze or stainless steel, slight lifting of the lever results in dripwise oiling Volume ccm 0 300 0 300 0 300 4 201 004 005 00 007 008 5 7 Tube length 130 130 130 130 130 130 130 130 130 130 130 Pump mechanism single single single single single single single single double double double 4 201 004 Aluminium Aluminium Aluminium Aluminium Polyethylene Polyethylene Polyethylene Polyethylene Polyethylene Polyethylene Polyethylene 4 201 005 008 4 201 5 7 4 203 Professional oiler for professional use The exemplary technology enables you to oil in any position without the pump mechanism drawing in air Including upside down Spray tube length 130 Volume ccm 4 203 Empty weight g Pump mechanism 0 300 525 444 372 double double double Lightweight metal Lightweight metal Lightweight metal 4 203 4 204 Spray/Atomiser made of plastic, for finely spraying all kinds of different aqueous liquids 4 204 020 Pump spray/atomiser, an air cushion conveniently presses the liquid through the atomiser nozzle Volume l 05 20 4 20 Microatomiser does not need any propellant or electrical power supply Spray angle can be adjusted to a point jet by turning Can be refilled as often as necessary The pump mechanisms are nickelplated to protect them against aggressive media and the valve spheres are made of stainless steel Nozzle tube length 80 Volume ccm 0 300 0 300 4 204 005 0 020 4 20 1 2 3 Empty weight g 73 97 470 4 204 005 4 20 Empty weight g 340 258 198 24 2 202 Height 230 300 3 4 204 0 Nozzles Ø 08 08 08 Aluminium Aluminium Aluminium Polyethylene Polyethylene Polyethylene 4 204 020 4 20 1 3 Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 13

4 208 Plastic oilers without pump, made of polyethylene, elastic, oil, petrol and acidresistant, with adjustable brass spray tube, tight due to twist lock on the tip of the tube 4 208 4 208 4 208 Volume ccm 125 2 0 4 208 4 2 Toolbag oiler made of PEHD, unbreakable, transparent, screw coupling and spray tube made of brass, spray nozzle with captive nozzle fastener Volume ccm 75 4 2 Tube length 4 2 Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps 4 212 Bellows oiler made of polyethylene, elastic, unbreakable, oil, petrol and acid resistant 2 Volume ccm 0 Stroke volume ccm 4 218 4 212 4 218 Universal hand pump Precision pump, aluminium, single action The respective medium is drawn in and pressed out through the same opening For occasional use for extracting antifreeze, coolant, cleaner s solvent or for oiling This device is also indispensable for metering fluids and for extracting dust from freshly drilled wall plug holes Including nozzle tubes in tube Ø, tube shape straight and curved, tube length 90, 140, 2 Ø 40 Empty weight g 412 4 212 4 218 14 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

4 220 Hand pumps double action They do work with every stroke: intake, fill Can be used in all branches of industry, small trade firms and for hobbies, for heating oils, mineral, synthetic and biological oils, cleaner s solvent, coolant, antifreeze, methylated spirits, petroleum, braking fluid and much more Sleeve tube Ø 4 220 Stroke volume Stroke length Hose length Empty weight 4 220 ml g 40 0 20 720 208 255 00 00 45 882 4 222 Measuring beaker made of polyethylene, breakproof, oil and acidresistant, with funnellike pouring spout and measuring scale 4 222 Capacity litre 05 1 2 4 222 4 223 Measuring beaker made of polypropylene, with measuring scale, transparent Breakproof and stable, oil and acidresistant Capacity litre 05 1 2 3 5 15 4 223 005 0 020 4 224 Oil storage cans round shape, made of tin plate, with hinged lid and captive tube cap, handle, leakproof due to doublebeaded base and welded seam, stable shape Capacity litre 4 224 004 005 0 020 004 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps 15

4 22 Funnels without rim, made of polyethylene, oil and acid resistant, breakproof Top Ø 75 1 4 22 004 005 4 22 4 228 Funnels made of plastic, breakproof, oil, acid resistant, high overflow edge, high flow rate, with interchangeable strainer and external thread for screwing on the flexible extension tube No 4 232 Top Ø 4 228 with external thread 4 228 4 232 Flexible extension tube for screwing onto funnel No 4 228 4 232 300 4 232 Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps 4 240 Funnels with elbowed plastic tube, oil and acid resistant, breakproof, high overflow rim, high flow rate, with interchangeable strainer Top Ø 4 240 4 242 Replacement strainer Suitable for funnel No 4 228 and 4 240 made of brass Strainer Ø 58 4 242 4 243 Petrol can made of sheet steel, stoveenamelled on the inside and outside Volume litre 5 20 Flexible pouring spout Rigid pouring spout Cap seal 4 243 905 9 920 922 923 924 924 922 923 4 240 4 242 905 920 1 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

4 244 Petrol can suitable for liquid fuels made of polyethylene with FLA red pouring spout is stored in the can with flexible pouring spout pouring spout with integrated venting cap with strip fastening to secure it against lost robust and insensitive to impact TÜV tested, UN/BAM approval 005 0 020 Volume l 4 244 Size H x L x B Weight g Long pouring spout Ø pouring spout 5 20 005 0 020 237 x 331 x 185 319 x 329 x 195 4 x 285 x 229 40 820 1270 195 195 195 20 20 20 4 245 Grease nipple made of zinced steel Prices quoted are for per nipples 4 245 Thread type Thread length Overall length AF hex AF square Angular position Head Ø 008 H1 H1 H1 H1 H2 H2 H2 H2 H3 H3 H3 H3 M1 M1 M1 M1 004 00 008 0 012 014 01 018 020 022 024 02 028 030 032 M x 1 M8 x 1 M x 1 G1/8 M x 1 M8 x 1 M x 1 G1/8 M x 1 M8 x 1 M x 1 G1/8 M x 1 M 8 x 1 M x 1 G 1/8 55 55 55 55 55 55 55 55 55 55 55 55 1 1 1 1 202 202 205 205 180 180 180 180 135 135 170 170 4 254 Highpressure pushtype grease guns DIN 1282, made of precision steel tube, tempered black surface finish, suitable for viscous oils and greases of medium consistency, allpurpose tip suitable for taper and spherical grease nipples Tube capacity ccm 0 1 0 1 4 254 00 015 115 Body Ø x length 30 x 115 40 x 185 30 x 115 40 x 185 4 258 Highpressure pistontype grease gun DIN 1282 fore greases with high consistency, made of precision steel tube, tempered black surface finish, piston tube can be pulled out, therefore also suitable for deeper lubricating points, allpurpose tips suitable for tapered and spherical grease nipples Tube capacity ccm 180 180 4 258 018 118 Body Ø x length 44 x 149 44 x 149 7 9 11 11 17 17 17 17 Hallbauer 170 240 170 240 Hallbauer 328 318 9 9 11 11 9 9 11 11 Tip type 45 45 45 45 90 90 90 90 Pointed Pointed Allpurpose Allpurpose Tip type Pointed Allpurpose 1 1 1 1 0 01 018 024 02 032 4 254 4 258 Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps = ibemo UNIT PRICE Kazakhstan FOR PURCHASE OF 090301 ONE PACKAGING Republic UNIT of PER Kazakhstan, ORDER NUMBER West PLEASE Kazakhstan ALWAYS STATE NUMBER Oblast, OF ITEMS Aksai, IN ORDER Pramzone, BKKS office complex Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 17

4 22 Pushtype grease gun for oils made of precision steel tube, with plastic cap, also suitable for low viscosity oils, allpurpose tip suitable for tapered and spherical grease nipples Tube capacity ccm 180 180 4 22 018 118 Body Ø x length 44 x 149 44 x 149 Hallbauer 240 240 Tip type Pointed Allpurpose 4 22 4 2 Highpressure handlever grease gun DIN 1283, 800 bar test pressure, 400 bar working pressure, filled with 400 g cartridge or loose grease (including with filling device), body made of precision steel tube, welded to DIN 2394, internal surface absolutely free of scoring, with TÜV and DLG test marks, connection thread M x 1 4 2 (without nozzle tube) 4 2 Grease container Ø 405 5 4 270 Accessories for highpressure handlever grease gun No 4 2, connection thread M x 1 4 270 4 270 Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps Curved nozzle tube with pointed tip Curved nozzle tube with hollow tip Curved nozzle tube with hydraulic tip Reinforced hose300 long with hydraulic nozzle Reinforced hose 0 long with hydraulic nozzle Reinforced hose 300 long with sliding coupling 1 Ø Reinforced hose 0 long with sliding coupling 1 Ø 4 272 Pneumatic grease gun can be connected to all types of compressors as well as to truck air lines, the pressure transmission ratio is 1 : 0, ie the grease pressure in the reinforced tube is 0 times higher than the air pressure generated by the compressor, recoended working pressure bar, complete with reinforced hose 300 long and hydraulic nozzle Capacity ccm 4 272 0 004 Replacement hose No 4 270 00 and 007 00 007 009 0 9 145 Greases for highpressure handlever grease gun Suitable for 4 2 Volume/cartridge g 400 400 9 145 040 140 Multipurpose grease, lightcoloured Longterm highpressure grease with graphite Lubricant quantity per actuation l 09 9 145 040 9 145 140 4 272 004 18 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

4 273 Pneumatic grease gun for use with lubricating greases up to NLGI 3, grease temperature up to C Grease is pumped by means of compressed air, 4 bar, pressure application (charge pressure) by means of hand pump, pressure relief (charge pressure) by means of drain and pressure relief valve, continuous grease pumping by means of compressed air motor, delivery rate / stroke 08 cm 3, working pressure of compressed air drive bar, minimum pressure (compressed air drive) 2 bar, maximum compressed air drive 8 bar, charge volume 0 cm 3, charge options: 400 g grease cartridge DIN 1284, grease charger, 400 g screwin cartridge Complete with 1 reinforced hose M x 1, 11 x 300 1 nozzle tube, straight M x 1, 1 2 precision tips 4 BA, M x 1 Hang eye 4 273 4 273 4 282 Pneumatic lubricator Suitable for oils and greases up to consistency class 3, including eco greases, equipped with grease followup piston, steel dust cap, 3 m long safety greasing hose and gun with professional Zjoint, particularly smooth running under pressure, with trolley, pressure transmission 1:0, minimum air pressure 35 bar, maximum 85 bar, noise level 7 db (A), greasing pressure maximum 0 bar, delivery rate 00 cm 2 /min with free discharge, lowwear operation for long life, for all normal coercially available grease buckets For grease bucket kg 4 282 15 20 25 0 015 020 025 0 4 284 Spare parts and accessories for pneumatic lubricators No 4 282 Greasing hose 30 m long Greasing hose 75 m long Highpressure grease gun with nozzle tube Nozzle tube with 4 jaw professional tip for grease guns 4 284 005 007 4 282 Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 19

4 800 Inspection lamps for 230 V, with protective glass and E 27 holder, 5 m cable, hangup hook, without bulb Prod No 4 800 0 for bulbs up to max 0 watt Prod No 4 800 020 for bulbs up to max watt robust industrial type for bulb max watt 4 800 0 0 020 with shockabsorbing, impactproof and resilient protective cage robust industrial type (rubber) for continuous use, with protective cage and hinged cover according to EN 0598 4 800 0 4 800 020 Replacement bulbs, see Prod No 4 824 4 801 Inspection lamp with safety extralow voltage 42 V, breakproof, with antidazzle facility in the protective cover Lamp completely ready for use with 5 m H07RNF, CEE plug with a 0W E 27 bulb for 42V 4 801 00 Power watt 4 801 Ø 0 00 270 1 Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps 4 803 Fluorescent inspection lamp with safety extralow voltage 42 V, 8 watt with 5 m cable H05RNF, electronic control gear in the handle, with plug for 230V connection Power watt 8 Power watt 8 4 803 4 804 Fluorescent inspection lamp 230 V, with resistive power cord and two pin earthing plug for class II apparatus, cable length 5 m 4 804 4 4 magnetic Ø 45 Ø 45 5 years warranty 4 803 4 804 20 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

4 805 Powerful inspection lamps for 230V, made of rubber, particularly shock absorbent, handy rubber handle with hexagon, electronic control gear with On/Off switch in the handle, therefore bright, even and flickerfree light to spare the eyes, stable impact and breakproof, highly transparent protective tube made of polycarbonate with antiglare, rubber connection cable 5 m with two pin plug for Class II apparatus, splashproof, replaceable compact fluorescent lamp, rotating steel hook for hanging up, degree of protection IP44, splashproof 4 805 4 805 Power watt 4 805 Light output lumen 24 18 1800 1 00 0 4 80 Halogen lamp, telescopic stand for 230V, for construction site, workshop, industry, etc, splashproof, class of protection IP 54, with stable tubular steel frame, rotatable and lockable lamp, with connection cable and plug, for use indoors and outdoors 0: with universal stand made of particularly stable, plastic coated tubular steel, height adjustable from 70 cm to cm 4 80 4 80 1 Power watt 4 80 0 with halogen lamp 0 with stand, with halogen lamp Halogen bulb, 0 watt, 230 volt Halogen bulb, 0 watt, 230 volt 4 811 Freestanding construction lamp with electricity distributor 230 V, for use outdoors Mobile, antidazzle watt lamp with integrated triple electric sockets/electricity distributor and light On/Off switch Cover made of impactresistant polycarbonate, therefore maximum transparency and top quality Lamp can be swivelled with latch locking element Holder E 27 Extremely stable frame With full protection handle 5 m weatherproof rubber cable H07 RNF 3G 15 with plug Power watt For bulbs, see Prod No 4 824 without bulb 0 1 2 4 8 Freestanding halogen lamp 230 V, for trade and industry and use outdoors with 5 m highly flexible rubber connection cable for outdoor use Lamp: Super halogen lamp, shockproof Quality for the highest standards Highintensity, safe, very good to handle With special handle, permanently connected to the lamp, the handle cannot be lit by the lamp and therefore heated With stable protective grille against contact and glass breakage Very stable, steady frame, surface coated Power watt 0 with halogen lamp, shockproof 4 8 4 811 highquality industrial type adjustable from 70 cm 4 80 0 4 8 View of the back 4 811 Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 21

4 812 Inspection lamp 230 volt alternating current, including 5 m power cord, with 2 x 24 W TC fluorescent tubes which ensure high luminosity combined with low energy costs Lamps have been especially designed for robust use to satisfy all requirements, the additional socket on the side of the lamp enables other equipment to be easily connected, class of protection III, degree of protection IP 44 415 x 285 x 1 incl additional socket on housing Light intensity lumen 300 4 812 4 812 4 812 Magnetic holder for inspection light Suitable for inspection lamp 4 812 With mounting plate, cable rewind, tilt joint, rubber metal buffer Three flat magnetic grippers with 0 kg holding force Supplied without inspection lamp Magnetic holder 4 812 011 4 812 011 4 814 Stand with mounting device suitable for lamp No 4 812 145 cm to 2 cm height adjustable Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps Height cm 1452 4 814 4 824 Bulbs 230 V, E 27 screw base, for lamps No 4 800, 4 811 Power watt 0 4 824 00 0 020 shockproof normal normal normal 4 814 4 824 22 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

4 835 Halogen machine lamp watt luminosity adequate lighting of the work area even at larger distance Lamp head can be rotated through 300 Flexible, plastic sheathed metal hose Waterproof On/Off switch on the lamp head With 5m rubber cable H07RNF and : 24 volt type Screw mounting plate and 004: 230 volt type Magnetic base and : With screw mounting plate and 004: With magnetic base 4 835 W, 24 V, can be screwed on W, 24 V, with magnetic base W, 230 V, can be screwed on W, 230 V, with magnetic base 4 835 004 Weight kg 12 17 27 32 4 838 Machine lamps antidazzle with 230 V and 11 watt compact fluorescent lamp, with integrated control gear and switch Completely ready for use with 5 m connection cable HO7RNF, integral plug IP 44 and tubes Flexible metal hose With magnetic base With magnet kg With magnet 75 kg With magnet kg With magnet 75 kg With screw mounting plate 4 842 230 volt 4 838 4 842 Machine lamps, 230 volt/24 volt Antidazzle watt machine lamp 230 V with a rubber lamp part and thermal glass safety lens The lamp bears the GS mark and is supplied completely ready for use with 5 m connection cable HO7RNF, integral plug IP 44 and shockproof bulb Flexible metal hose Various mounting options Lamp with switch 4 842 0 4 842 013 Machine lamp for safety extralow voltage as described above, with halogen lamp W/24 volt, base GY 35, 5 m HO7RNF connection cable, with CCE plug 24 V ready for use, lamp with switch Price O 13895 1280 14340 4 842 24 volt 0 012 013 Weight kg 25 30 Screw mounting plate Magnetic base Weight kg 25 30 20 4 838 4 842 Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 23

4 855 LED lamp with rechargeable battery for local range with NiMH rechargeable battery High light intensity, white LED, shockinsensitive, virtually unlimited life of the bulb (>,000 h), very low energy consumption Average rated life hrs 2 4 855 Charging time hrs 1 Size 97 x 45 x 29 4 855 4 85 LED lamp with rechargeable battery Lighting range: > m, very high luminosity due to 4 LEDs, focussed through 4 lenses, clearly limited and uniform beam of light, life of the LEDs over,000 hours, shockinsensitive NiMH rechargeable battery, no exhaustive discharge, no overcharging, no memory effect, average rated life approx hours, Charging time: max 14 h 4 85 Average rated life hrs 4 85 Charging time hrs Size 30 135 x 48 x 48 4 81 Rechargeable battery halogen handheld spotlight rechargeable, handy, splashproof work light with switchable pilot/main lamp and electronic emergency lighting function, hermetically sealed rechargeable quality batteries, electronically controlled battery charging by means of integrated power cord, LED charge control, overchargingproof with exhaustive discharge protection, lamp head can be rotated vertically through approx, complete with strap handle and wall mounting bracket, LED as pilot lamp: h average rated life incl carry strap + wall mounting bracket Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps Average rated life of the pilot lamp hrs 4 859 Rechargeable halogen handheld spotlight Handy, rechargeable halogen spotlight with battery charge indicator, focussing feature and separate charger, lighting range: 0 m, average rated life: min, bulb: E, 52V/085A halogen, rechargeable battery: NiCd, 48V/1Ah, weight: 5 g, Housing material: Plastic, black 4 859 Average rated life of the main lamp hrs 30 4 81 4 817 Rechargeable emergency lamp can be charged from the 230 V mains system, 2 TL fluorescent tubes can be switched in single or double tube mode, overchargeproof due to electronically controlled battery charging, with exhaustive discharge protection Average rated life hrs 4 7 4 817 Charging time 20 24 hrs 18 Charging time hrs Size 290 x 1 x 111 Size 12 x 112 x 33 Dimensions 2 x 85 x 125 4 81 Similar to illustrated model 4 817 4 859 24 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

4 81 Pen light with robust metal casing and pocket clip : including 2 x LR3 AAA batteries with pushbutton switch 005: Batteries: 2 x mignon (AA) (not included) Batteries 4 81 Dimensions L x Ø 4 81 4 81 005 2 x LR3 AAA 005 140 x 14 135 x 1 4 82 Bright Star torch shockproof, oil and chemical resistant ribbed housing, long life switch with edge protection against inadvertent switching on, space for spare bulb; special reflector with unbreakable lens 4 82 3 For replacement batteries, please see Prod No 4 8 4 82 5 For batteries / Qty 4 82 4 82 7 2 x mignon AA 2 x mono D 3 x mono D 3 5 7 155 25 4 83 Torches The original from the USA Robust precision housing made of aluminium, splashproof due to O rings Can be focussed from point source to floodlight 008 and 014 in gift case incl batteries 025 to 037 with spare bulb in the cap Spare bulbs Prod No 4 83 8 4 83 137 in pack of 2 For replacement batteries, please see Prod No 4 8 Model Solitaire MiniMAG 2 DCell 3 DCell 4 DCell 4 83 008 014 025 031 037 cm 80 145 2 315 375 Batteries / Qty Micro 1 Mignon 2 Mono 2 Mono 3 Mono 4 4 83 Bulb 8 114 125 131 137 Lamp type Halogen Halogen Krypton Krypton Krypton 4 83 008 4 83 014 4 83 025 4 83 031 4 83 037 Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 25

4 84 MityLite torch Watertight up to 1 m, EX protected (for use in explosive atmospheres), ATEX cat 3T4, Material: Polycarbonate, laser spot xenon light, Lumen: 75, Candle power:,000 Scope of supply: Laser spot module, light deflector attachment and 2 energizer alkali micro cells (AAA), : LED type 4 84 Average rated life of battery h / C 4 84 Size 4 84 121 x 21 x 21 14 x 23 x 23 4 85 Torch, explosionproof Protection class: EXprotected (for use in explosive atmospheres), Zone 0T suitable for industrial use, watertight, made of shockproof plastic, colour silver, weight 245 g, LED: 5, lumen: 89 Light beam: white, Scope of supply: shoulder strap and batteries (4x IEC LR4 alkaline button cells) Average rated life of battery h 4 85 Size 4 85 130 70 x 25 Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps 4 872 Bright Star Industrial torch CE marking in accordance with UL splashproof, degree of protection IP4 with threeway switch ( On Off Flash ) Krypton bulb Metal hangup ring Candle power 40 Approved by the German SeeberufsGenossenschaft (Maritime Employees Association) Colour: black For batteries 2 x mono D 4 875 Portable searchlight volt, plastic, black, with krypton bulb, without battery, suitable battery 4 8 0 4 877 Heads Up Lite head lamp 3 LED head lamp, splashproof Dimensions: 0 x 40 x 43, weight 9 g incl battery, material: ABS plastic, battery housing: Thermoplastic, rubber headband: black, textile headband: grey/black, lamp: black, light beam: white, LED: 3 x 5, lumen: 3 per LED, Battery: 3 x AAA alkali, scope of supply: Rubber headband, incl batteries, ATEX standard: EX IIG 2G EEx ia IIB T1TRL 03ATEX25X with 1 LED 1 h, with 3 LED 80 h Average rated life of battery h 1/80 4 875 4 872 4 877 Approved by the German Seeberufs Genossenschaft (Maritime Employees Association) Size 270 180 x x splashproof Size 0 x 40 x 43 4 872 4 875 4 877 2 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

4 8 Batteries nonrechargeable 1 Varta alkali manganese batteries with 2 to 3 times longer life and shelf life than conventional zinc carbon batteries 004 005 00 1 2 3 205 2 Model / 4 8 4 8 Varta Voltage Volt Dimensions Mono Baby Mignon AA Eblock Flat Micro AAA Button cells Alkaline V13GA Silver oxide SR44W Lithium CR2032 004 005 00 1 2 3 15 15 15 9 45 15 08 x 33 Ø 49 x 25 Ø 2 x 137 Ø 47 x 23 x 19 441 x 2 Ø 205 15 54 x 11 Ø 1 207 155 54 x 11 Ø 1 2 30 32 x Ø 1 2 2 4 1 1 4 4 87 Rechargeable batteries, NiCd and NiMH rechargeable, 12 volt 004: Nickel cadmium 1 2: Nickel metal hydride NiCD NiCD NiCD NiCD NiMH NiMH Model Mono Baby Mignon Micro Mono Mignon 4 87 004 1 2 4 870 Chargers for (NC) nickel cadmium and (NMH) nickel metal hydride rechargeable batteries For mignon AA, micro AAA, mono, baby For rechargeable batteries, see Prod No 4 87 4 873 Battery tester Practical battery tester with analog measurement mechanism For displaying the battery condition For testing all standard batteries including special batteries for cameras and computers Test range 15 V 225 V The following types of battery can be tested: 15 V button cell, 15V AAAN, 15 V AAC, 15V D, 30 V lithium, 45 V block battery, 0 V photo battery, 90 V 9V block, V lighter battery, 225 V flashlight battery, 15 V photo, 30 V photo, 0 V photo BT 5 4 870 4 873 Power Ah 44 24 025 70 25 Test range 15 V 225 V 1 2 004 4 870 4 873 Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps = ibemo UNIT PRICE Kazakhstan FOR PURCHASE 090301 OF ONE PACKAGING Republic UNIT of PER Kazakhstan, ORDER NUMBER West PLEASE Kazakhstan ALWAYS STATE NUMBER Oblast, OF ITEMS Aksai, IN ORDER Pramzone, BKKS office complex Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 27

4 902 Cable reel with duo safety system, made of breakproof plastic, 4 socket outlets with earthing contact, stable, shockproof tubular steel frame, double safety due to integrated automatic overheating and accident protection, with visual indicator Cable length m 4 902 Cable type PVC H05 VVF 3G 15 2 Reel Special plastic 4 902 4 90 Cable reel with duo safety system, robust cable reel made of zincplated sheet steel, 4 socket outlets with earthing contact, with protective caps, stable, shockproof tubular steel frame, double safety due to integrated automatic overheating and accident protection, with visual indicator Cable length m 4 90 Cable type Reel Rubber H05 RRF 3 x 15 2 Zinc plated sheet steel 4 90 4 9 Retractable cable reel with duosafety system, power supply extension with 4 VDE standard socket outlets with earthing contact, m highquality extension cable, easy to wind and unwind, well cleared up and protected, double safety due to automatic overheating and accident protection in the event of overheating or overload Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps Cable length Cable length m 40 40 m 4 912 004 4 9 Cable type Rubber H07 RNF 3 G 15 2 Breflex XYMM 3 x 15 2 Cable type PVC HO5 WF 3 x 15 2 4 912 Cable reel for use outdoors, 230 V, double, 3 protective insulation, 3 splashproof socket outlets with earthing contact with selfclosing covers, particularly stable portable frame, powder coated with full protection handle, double safety due to automatic overheating and accident protection with red indicator lamp, with anticable twist system Reel Plastic Reel zincplated, highquality coated sheet steel, with rotary contact made of zincplated sheet steel, with special cable (orange) Breflex Super Solid for extreme mechanical stresses with very good wear resistance, oil and UV resistant 004 4 9 28 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

4 91 CEE cable reels 3pol, splashproof safety cable reel made of highly breakproof special plastic for use outdoors, CEE type plug, 400 volt, with 3pole safety shutdown, 3 socket outlets, of which 1 CEE connection socket outlet 5pole, 400 volt, two socket outlets with earthing contact, 230 volt, splashproof with hinged cover, reel made of special plastic Cable length m 4 91 Cable type 30 40 Rubber H07 RNF 5 x 25 Rubber H07 RNF 5 x 15 4 91 4 920 Power station electricity distributor for use outdoors, professional electrical power distribution with CEE socket, 400 V and 3 socket outlets with earthing contact 230 V/1 A, splashproof, stylish ergonomic design, housing made of highly breakproof plastic, practical takeup device for storage of the cable, suitable for mounting on the wall Cable length m 4 920 Cable type 2 Rubber H07 RNF 5 x 15 2 4 920 4 928 Extension cables 230 V, with earthing pin plug and coupling with practical wall bracket Cable length m 4 928 Cable type 25 25 25 4 932 Extension cables for outdoor use 230 V, with earthing pin plug and coupling with cover with practical wall bracket Cable length m 4 932 Rubber H05 RRF 3 x 15 2 Rubber H05 RRF 3 x 15 2 Cable type Rubber H07 RNF 3 x 15 2 Rubber H07 RNF 3 x 15 2 Rubber H07 RNF 3 x 25 2 4 934 Foursocket distributor 230 V, for difficult construction site use, heavyduty rubber cable for use outdoors, IP 44 ideal for harsh conditions on construction sites, for use in the workshop and for industrial use Quality rubber cable (H07 RNF G15) with 4 outlet socket power block 4 934 Cable length m 5 4 934 0 incl wall bracket 4 934 0 4 928 4 932 Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 29

4 93 Threephase ac extension cable 400 V, with CEE connections, red Cable length m 25 25 4 93 0 012 020 022 Maximum load ampere 1 1 32 32 Cable type H07RNF 5x25 2 H07RNF 5x25 2 H07RNF 5x40 2 H07RNF 5x40 2 4 93 4 938 Power distributor power distributor can be hung up at the required height, up to 8 socket connections enable working without spaghetti of cables in the work area, up to 4 sockets are arranged in the smallest space on each side, shockproof plastic housing with large tool hook, with 3 m stable, zinc plated steel link chain, connection cable with earthing contact or as CEE type, length 5 m Front side Rear 4 938 4 socket outlets with earthing contact 230 volt 4 socket outlets with earthing contact 230 volt 1 CEE socket outlet, 5pole, 400 volt 2 onehand couplings for compressed air, hose 5m Ø x 12 3 socket outlets with earthing contact, 230 volt, splashproof 3 socket outlets with earthing contact, 230 volt, splashproof 005 007 4 938 4 938 005 4 938 007 Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps 4 939 Extension sockets 00 0: with 3 m connection cable and On/Off switch Colour: black 025: splashproof, with 2 m rubber connection cable HO7RNF Industrial type for robust use, with selfclosing splashproof covers Colour: yellow Number of socket outlets 8 Prod No 025 splashproof type 5 4 939 00 008 0 025 with 3 m connection cable Industrial type, splashproof 00 008 0 025 30 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

4 941 Solid rubber plug 230 V, industrial type for the toughest use, spacious design, with thermoplastic strain relief block 4 942 Solid rubber coupling as 4 941 4 941 4 942 For cable Ø 4 941 4 942 1 Socket outlet Coupling 4 943 CEE connector nickelplated pins, 5 pin, 400 volt, H 4 944 CEE coupling nickelplated sleeves, 5 pin, 400 volt, H 4 943 Maximum load ampere 4 943 Connector 4 944 Coupling 1 32 3 01 032 03 01 032 03 4 944 4 94 Cable stripping, lead and work knife 190 Handle Wood Plastic Blade fixed folding 4 947 Cablestripping pocket knives with powerful fold open blades and wooden handle Number of blades 1 2 3 strong blade with round wire stripper strong blade and threesquare awl strong blade, screwdriver with stripper and awl 4 94 4 947 folding 4 94 4 94 Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 31

4 948 Cablestripping knives All knife blades are TIN coated Exact cutting depth can be set Handles made of wearproof plastic PVC and cadmium free and : For stripping ribbontype webbed building cables and flat cables Spare blade in the handle Without precutting blade 011 to 021: For stripping all coonly used round cables With precutting blade Spare blade in the handle TIN coated 4 948 4 948 4 948 011 4 948 013 4 948 021 For cable Ø 4 948 Blade type Size L x B x H 8 28 27 37 8 28 8 28 8 28 011 013 021 Hooked Hooked straight 27 Secura 35 Secura 28 Standard 28 H Secura 28 G Secura 130 x 30 x 20 1 x 30 x 20 170 x 30 x 170 x 30 x 170 x 30 x Replacement internal blade for 011 and 013 4 948 015 4 948 015 Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps 4 98 Sheath and insulation stripping tool Sheath and insulation stripping tool for all coonly used coax cables Also suitable for PVC flex 3 x 075 2 With length scale (Replacement blades are not available) For cable Ø 48 75 For cable Ø 8 13 4 98 4 99 Inbox sheath stripper for stripping the sheath off all coonly used round cables eg NYM cable 3 x 15 5 x 25 2, no need to set the cutting depth 4 99 Size x Ø x 15 4 98 4 99 32 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

4 970 Allpurpose wire stripper (inside blade) for stripping cables with 8 13 Ø and stripping conductors 02 40 2 No adjustment required With lengthwise cut and insulation stripping device (Replacement blades are not available) 4 970 For cable Ø 4 1 4 970 Size x Ø 125 x 25 4 971 Special sheath stripper For PVC insulated data counication and control cables Cable with inside pushout blade Cable from 5 15 Ø, conductor 02 40 2 (Replacement blades are not available) 4 971 For cable Ø 5 15 4 971 4 974 Microprecision insulation stripping tool For electronics and telecounication cables, 30 20 AWG presettable crosssections with cable cutter and lengthstop Microprecision insulation stripping tool for electronics and telecounications cables Working range from 025 08 Ø For cable Ø 025 08 4 952 Metal cable stripping knifes adjustable cutting depth for insulation up to 45 thick, rotatable blade for round, lengthwise and spiral cuts, retaining clip with integrated cutting edge for breaking open insulation which has been cut into For cable Ø 25 25 3 4 974 4 952 4 957 Wire strippers for cables and litz wires up to 5 diameter, drop forged, individually hardened and tempered using highfrequency induction method, adjusting screw and lock nut for adjusting the cable diameter, opening spring for convenient working, : Head polished, plastic coated handles Wire stripping values 4 957 Ø 2 25 31 Size L x B x H x 40 x 135 140 5 years warranty 4 974 4 952 4 957 31 Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 33

4 958 Wire strippers with opening spring for single, multi and finely stranded conductors with plastic or rubber insulation Adjust using knurled screw and lock nut special tool steel, hardened and tempered in oil : 11 Polished head, plastic coated handles 31 Chromeplated head, handles with twocoloured multicomponent sheathing 4 958 11 Wire stripping values 4 958 Ø 2 5 5 11 31 4 958 31 4 951 Insulation stripping side cutter the indispensable pliers for electrical installation Precision wire stripping holes for single stranded (solid) conductors 15 and 25 2 inductively hardened precision cutting edges for soft wire up to Ø 40, cutting edge hardness approx 0 HRC Vanadium electric steel, hardened and tempered in oil Polished head With twocoloured multicomponent sheathing 4 951 01 Wire stripping values 4 951 2 AWG 15 + 25 15 + 13 01 Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps 4 991 Wiring pliers the ideal pliers for cabling work for gripping, bending and cutting soft, mediumhard and hard wire Precision cutting edges with additional induction hardening, cutting edge hardness approx 0 HRC with precision insulation stripping holes for crimping wire end ferrules Special grade special tool steel, hardened and tempered in oil Polished head Plastic coated handle Wire stripping values 4 991 05 075 /15 / 25 11 4 959 Multipurpose wire strippers Particularly suitable for Teflon, silicone, Radox and rubber no damage to the conductor thanks to precisely ground moulded blades with adjustable length stop and cable routing 4 interchangeable blades Conductor crosssections 4 959 2 208 014 00 2 0 020 00 195 195 195 4 991 11 4 959 34 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

4 953 Sheath stripping tool for removing all insulation layers from cables from Ø 25 cutting depth adjustable up to 5 suitable for lengthwise and circumference cut interchangeable blade (both sides can be used) 4 953 025 For cable Ø 4 953 from 25 025 1 125 Replacement blades 4 954 Insulation stripping tool ergonomic, automatic wire strippers with integrated safety cutter for conductors up to 2 Ø (solid conductors) no adjustment to conductor crosssection necessary 01 also suitable for removing sheathing from PVC flex 3 x 075 2, no adjustment required, pliers body made of glass fibre reinforced polyamide 4 954 004 Conductor crosssections 4 954 2 05 4 1 004 01 4 95 Wire strippers, selfadjusting compact standard tool for favourable price for all the coonly used cable crosssections and insulation materials for single, multi and finely stranded conductors from 02 to 0 2 with standard insulation independently adjusts to the different conductor crosssections, therefore no damage to the conductor handy design and low weight slender head shape for difficult to access work areas with wire cutter for Cu and Al conductors up to max 25 2 with adjustable length stop from 0 180 for equal insulation stripping lengths for serial work easy to exchange blades housing made of tough, glass fibre reinforced plastic with ergonomic soft plastic zone in the handle Insulation stripping values 02 0 2 AWG insulation stripping values: 24 : 180 Precise insulation stripping from 02 0 2 Conductor crosssections 4 95 2 02 00 180 Wire cutter up to 25 2 max 4 954 01 4 95 00 Insulation stripping in confined spaces Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 35

4 90 Insulation stripping and cutting tools STRIPAX and MiniSTRIPAX for insulation stripping and cutting multiple conductors, including several conductors in one operation with ribbon conductors, double insulated cables in two operations without any special adjustments, no splicing open of the individual conductors 4 90 4 90 00 4 90 01 Conductor crosssections 4 90 MiniSTRIPAX STRIPAX STRIPAX 008 1 008 1 00 01 135 4 91 Insulation stripping and cutting tool for insulation stripping and cutting conductors 008 0 2 Ø (AWG 20 11), multiple conductors, several conductors in one operation for thin ribbon conductors, double insulated cables in two operations without any special adjustments, no splicing open of the individual conductors Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps with wire cutter Conductor crosssections 4 91 2 008 4 92 Wire strippers, selfadjusting for single, multi and finely stranded conductors with plastic or rubber insulation independently adjusts to the different conductor crosssections, therefore no damage to the conductor Readjustable cutting depth for different insulation materials with wire cutter for Cu and Al conductors, multistranded up to 2 and single stranded up to 0 2 smooth, easy running mechanism easy to exchange blade, plastic clamping jaws and length stop Low weight housing made of tough, glass fibre reinforced plastic Insulation stripping values 0,03,0 2 stop: 30 180 : Conductor crosssections 4 92 2 0 4 91 4 92 0 Wire cutter up to 2 multistranded 3 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

4 93 Multistrip selfadjusting multipurpose wire strippers for professional removal of difficult to work on insulations, eg Teflon and Radox as well as standard insulations of conductors from up to 2 independently adjusts to the different conductor crosssections, therefore no damage to the conductor fine adjustment of the tools for difficult to remove insulations is no longer necessary wearproof, screwed cutting clamping jaws made of steel prevent the cable from slipping through with wire cutter for Cu and Al conductors, multistranded up to 2 and single stranded up to 0 2 smooth, easy running mechanism blade, length stop and cutting clamping jaws are easy to exchange housing made of tough, glass fibre reinforced plastic with ergonomic soft plastic zone in the handle Insulation stripping values 2 AWG insulation stripping values: 32 7 : 195 4 93 0 4 94 CST insulation stripping tool for coaxial cables and round (shielded) data cables, fast resetting for other cable types due to adjustable and interchangeable screw holder, included setting block enables fast presetting of the cutting depths, interchangeable cartridges with coon blade spacings, blade cartridges can be used on two sides, basic tool without blade cartridges, see 4 95 Wire cutter up to 2 multistranded Conductor crosssections 4 93 2 0 195 Clamping jaws made of steel with cutting edges prevent the conductor from slipping through Automatic opening after completing the insulation stripping process Colour code green blue Conductor Ø 25 8 4 95 Blade cartridges for Prod No 4 94 4 94 Insulation stripping dimensions 71/51 = C/B; 2stage insulation stripping process Insulation stripping dimensions 5 = B; 1stage insulation stripping process 4 9 Cable tie gun for cable ties within the crosssection range from 24 to 48, see Prod No 4 97 4 9 0 4 9 Cable tie gun universally usable tool robust metal housing, low maintenance For clamping and automatic cutting of table ties Fourlevel quick adjustment of the tensile force up to tie width 48 90 4 9 1 3 4 95 4 9 1 Weight g 300 0 4 95 4 9 3 4 94 4 95 4 9 0 Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 37

4 97 Cable ties made of % pure nylon, pack of ties 138: Colour: natural 400 438: Colour: black 4 97 138 Size 4 97 natural 4 97 black 25 x 35 x 140 45 x 45 x 280 75 x 30 114 119 130 138 400 414 419 430 438 4 97 400 438 4 972 Three pronged pliers made of injection moulding, lightweight and handy, especially developed for affixing sleeves, prongs made of hardened and tempered, stainless steel, suitable both for small and for large series For groet internal Ø 4 972 For cable external Ø Prong length 0 1 2 4 4 4 15 30 190 190 190 25 35 52 4 972 Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps 4 973 Wire end ferrule pliers drop forged with plastic sheathed handles cable stripping and cutting device for pressing wire end ferrules DIN 4228 Part 1 + 4 For crosssections 2 02525 051 4 973 01 4 981 Wire end ferrule pliers for pressing wire end ferrules DIN 4228 Part 1 + 4 Pressing in labelled trapezoidal profiles for secure connection of ferrule and conductor Vanadium steel, hardened and tempered in oil 005: 9 particularly deep profiles with tapered side surfaces For cable Ø 025 25 025 1 4 981 005 155 220 145 180 4 973 4 973 01 4 981 4 981 005 ibemo Kazakhstan 090301 Republic = UNIT of PRICE Kazakhstan, FOR PURCHASE West OF ONE Kazakhstan PACKAGING UNIT Oblast, PER ORDER Aksai, NUMBER Pramzone, PLEASE ALWAYS BKKS STATE NUMBER office OF complex ITEMS IN ORDER 38 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

4 980 Crimping tools for wire end ferrules, crimping according to DIN 4228, only one crimping nest for all crosssections, forced block ensures quality crimp, ergonomically shaped handles 00 011 012 013 021 CTI S 022 HTN 21 for wire end ferrules 4 980 Wire end ferrule feed PZ4 PZ3 05 4 2 (~ AWG 20 12) with and without plastic collar from 05 2 short lever path) (~ AWG 20 ), foursquare pressing, unlocking option in the event of incorrect operation, only one die for the whole crosssection range 00 011 from the side from the front PZ Roto with and without plastic collar from 025 2 (~ AWG 24 ), unlocking option in the event of incorrect operation, only one die for the whole crosssection range, rotatable die 012 from the front or side PZ1 CTIS HTN21 with and without plastic collars from 1 2 (~AWG 2 1) three crimping stations according to the cable crosssections, approval according to VG 95211 for PVC and polyamide insulated connectors within crosssection range from 05 2 (according to DIN 4234), with stop for precise positioning of the contacts, for cable lugs, plug connectors, parallel and series connectors as well as plugin connectors for uninsulated cable lugs and connectors within the crosssection range from 05 2, such as rolled cable lugs, tubular cable sockets, plug connectors, parallel and series connectors, available with swivelling stop 013 021 022 from the side 4 980 Pressing tool For modular plugin connectors WE and DEC systems with additional functions Cutting and insulation stripping of 8pile flat or flat oval data cables Stops of 4pole WE connectors pole (RJ 11) WE connectors For AMP or similar connectors 4 980 201 for conductor crosssection 2 AWG 28 AWG 24 4 980 201 205 Weight g Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 424 Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps 39

4 98 Crimping tool Professional tool for cutting and stripping insulation from flat, unshielded telephone cable for pressing and 8pole Western plugs RJ 11/12 (95 wide) and RJ 45 (118 wide) exact crimping process due to parallel crimping uniformly high crimping quality due to forced lock (releasable) force increased by leverage/mechanical advantage for low fatigue work with length cutter and sheath stripping blade for ribbon cable and 12 long head tempered with black finish, handles with twocoloured multicomponent sheathing : with additional insulation stripping function for round cables 4 98 Capacity 4 98 4 98 RJ 11/12 (pin) 95 RJ 45 (8pin), 118 RJ (4pin), 75 RJ 11/12 (pin) 95 RJ 45 (8pin), 118 190 4 982 Selfadjusting crimping tools for wire end ferrules tempered with black finish, with ergonomically shaped twocomponent handles and 008 with side entry 012 with front entry and side entry up to 25 2 015 with front entry Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps Crosssection range 2 008 008 0 008 008 1 4 982 4 982 008 4 982 012 4 982 015 4 982 Crimping surfaces with side entry 4 x profiled 008 x profiled with front and side entry 012 4 x profiled with front entry 015 4 x profiled 40 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

4 982 Boxed assortment of wire end ferrules for insulated and uninsulated wire end ferrules / 15 / 25 / 40 2 ( pcs), 0 / 2 ( pcs) Crimping tool 4 982 012 Wire strippers Volume 4 982 Crimpling tool, wire strippers, 4 x pcs from 40 2, 2 x pcs from 0 2 1 4 982 1 4 989 Hand crimping tool, PEW 9 series smallest known jaw capacity high crimping force due to optimum transformation ratios best value for money good, firm grip due to twocomponent handles ensures optimum, solderfree, electrical connections with forced lock for reliable crimping (releasable) large range of crimping tools for a wide range of applications compact, lightweight design : 215 Weight: 490 g 4 989 Model 4 989 Profile Connectors Application area Crimping Capacity points 2 AWG PEW 9 020 coaxial connectors 3 RG 58, 59, 2, 71 PEW 932 030 uninsulated connectors 4 05 20 7 PEW 945 040 uninsulated 4 01 25 27 13 blade connectors PEW 9 055 uninsulated 3 05 0 20 blade connectors PEW 90 00 insulated connectors 3 05 0 20 PEW 990 070 Wire end ferrules 5 025 0 23 PEW 991 085 Wire end ferrules 3 5 2 7 3 4 978 Cable lug assortment in practical plastic box with lid, made of polycarbonate Size 355 x 230 x incl partitioning materials : 012: Cable lug rings, pcs LIR: 15M5V; 25M5V; MV Plug connectors, pcs LIP: 15R12V; 25R12V; R14V Butt connectors, pcs each LIB: 15B25VF; 25B25VF; B2VF Tab receptacles, pcs each LIF: 15F38R; 25F38R; F38R 015: 0 pcs each: AEH /14; 15/14 2 pcs each: AEH 05/14; 075/14; 25/14; 40/17 pcs each: AEH 0/20 pcs each: AEH /22; /24 Volume 4 978 12 x pcs from 05 2 012 12 x pcs from 05 1 2 015 4 978 012 Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 41

4 985 Crimping tool set of the case: Tool without crimping insert, tempered black finish, Allen key (AF 25 ), spanner (AF 7 ) and 2 spare screws (M4 x /M4 x 1 ) The sets are individually equipped with crimping inserts and positioning aids by the user The set can be equipped with a maximum of 7 crimping inserts and 4 positioning aids (locators) 4 985 Dimensions temp black fin 3 20 x 220 x 4 985 3 Model 4 985 Profile Connectors Application area Crimping Capacity Connector points 2 AWG width PEW 1231 131 Butt and pressure 5 15 15 7 connectors PEW 1232 132 uninsulated connectors 4 05 20 7 PEW 1445 145 uninsulated 4 01 25 27 13 28 + 48 blade connectors PEW 12 1 uninsulated 3 05 0 20 48 + 3 blade connectors PEW insulated connectors 3 014 40 20 PEW1271 171 turned contacts 4 014 40 25 11 Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps PEW 1271 173 locator for 171 4 014 40 25 11 positioning aid PEW 1280 180 Western plug 3 4,, 8 pole PEW 1290 190 Wire end ferrules 5 025 0 23 PEW 1291 191 Wire end ferrules 3 2 7 3 PEW12 2 coax connector 3 RG 58/59/2/71 PEW 12159 215 coax connector RG 58/174/31/188 PEW 1274 27 Modular plugs 4 05 25 20 13 4 980 Crimping tool For wire end ferrules (according to DIN 4228 T 1 and 4) with and without plastic collars forced lock ensures quality crimp unlocking possible in the event of incorrect operation only one die for the whole crosssection range rotatable die for introduction of the wire end ferrules from the front or from the side Working range 2 014 4 4 980 1 Weight g 33 4 980 1 42 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

4 980 Crimping tools for wire end ferrules, crimping according to DIN 4228, forced lock ensures quality crimp, one crimp nest for all crosssections for wire end ferrules 4 980 Wire end ferrule feed 4z z 1z 25z 05 4 2 from the front 05 2 from the side 1 2 from the side ; ; 1; 25 2 004 from the side 4 980 Crimping tools for insulated or noninsulated cable lugs, (according to DIN 4234), forced lock mechanism ensures quality crimp, can be opened in any position if incorrectly pressed 4 980 insulated 05 2 014 not insulated 05 2 015 not insulated 25 2 01 014 015 4 975 Crimping tool without transmission, with insulation stripping function 075 0 2, bolt cutting function and cable cutter for insulated cable lugs 5 for uninsulated cable lugs and blade connectors 1 for uninsulated blade connectors and for insulated cable lugs 4 975 For crosssections 4 975 2 05 220 05 5 225 05 1 240 4 977 Crimping pliers for insulated cable connections, litz wires and cable insulation are pressed in one operation, lever transmission, with forced lock, head made of precision cast steel, chrome alloy For crosssections 4 977 05 230 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 4 975 5 4 975 1 4 977 Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps 43

4 983 PUNCHDOWN termination tool without knife, for the termination of twisted pair cables on terminal strips with cutting/terminal contacts Product Termination tool PUNCHDOWN Accessories: Blade for 1 terminal strips Blade for LSAPlus strips with scissors function 4 983 005 4 983 4 983 4 983 005 4 994 Cable shears Shears head made of stainless steel, with opening spring, shockproof plastic handles and practical fastener, for pinchfree cutting of copper and aluminium cables 4 994 Cutting capacity Ø 01 4 994 01 Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps 4 995 Cable shears made of special steel, for copper and aluminium control cables for easy cutting, 2colour safety dip encapsulation 0V 2 4 995 021 4 995 Cable shears with twin cutting edge, enables cables over Ø 20 to be cut too, due to initial and final cut the handles always remain in a comfortable position, even when cutting large crosssections 4 995 023 extra sharp cutting edges (54 HC) Cutting capacity Ø 20 Cutting capacity Cu + Al Ø / 2 20 / 70 4 995 021 4 995 023 44 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

4 997 Wire rope and cable cutters blades made of C 70, interchangeable and readjustable, for cutting armoured aluminium and copper cables, wire rope and round steel bar with a strength of N/ 2, highstrength Al handles with rubber safety grips 4 997 019 4 997 Cable cutting capacity 2 Wire rope cutting capacity Ø Round steel bar cutting capacity Ø 4 997 00 190 00 019 00 1 14 4 9 4 998 Ratchet action cable cutters for onehand operation Cutter head made of highstrength special steel, hardened and painted, low effort due to gradual cutting, ratchet feed, can be unlocked in any cutting position, even large crosssections are cut without crushing the sheathing, for cutting copper and aluminium cables : Handles with twocoloured multicomponent sheathing VDE version, see 59 355 4 998 4 998 Replacement blades for ratchet action cable cutters for onehand operation Overall length 2 280 4 998 4 998 Replacement cutting heads 801 802 Cable cutting capacity Ø 32 52 4 999 Cable cutters for pinchfree cutting of copper and aluminium cables optimum mechanical advantage / leverage due to eccentric drive 20 300 4 999 Cutting capacity 45 52 Crosssection cutting capacity 2 240 380 Copper cable 300 2 finely and multistranded, segmental conductor 4 x 70 2 multistranded, aluminium cable 400 2 multistranded, segmental conductor 4 x 95 2 solid, data/telephone & control cable 45 Ø Copper cable 400 2 single and multistranded, segmental conductor 3 x 1 2 and 1 x 70 2 solid, aluminium cable 240 2 multistranded, data/telephone & control cable 52 Ø 4 998 801 802 4 999 4 999 Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 45

4 992 Notching pliers for notching out recesses in plastic housing for electrical and sanitary installations easy, pulling cut (scissors principle) clean cutting edges, precise cutting of the rubber lip on the skirting board pliers with different cutting shapes and handle lengths are available compact design, low weight easy to handle, pliers open automatically cutting head: special tool steel surface tempered with black finish, red plastic handles 4 992 01 Cutting width 4 992 4 992 020 1 20 01 020 4 425 4 993 Pelican cutter for burrfree cutting of plastic panels, skirting boards and cable ducts very good cutting effect even up to the tip of the cutters uniform, consistent handforce over the whole length of the cutting edge due to optimum leverage/mechanical advantage ergonomic handle design, good handling interchangeable cutting blades made of special hardened steel : tempered with black surface finish with ergonomically shaped twocomponent handles 00: 0 cutting length Without support Pumps / Oilers / Insulation strippers and crimping tools / Cable drums / Lamps 011: 1 cutting length With support for plastic panels and cable ducts max cutting length 0 1 Replacement blades 0 1 4 99 Notching pliers for wiring ducts special pliers for notching out the web segments of wiring ducts variable cutting depth flow principle 80 maximum within one cut clean, burrfree cut through to the bottom of the duct matrix with integrated ejector for cutting waste cutting punch with guide keys for centring the pliers pliers open independently material: special steel, tempered black finish surface ergonomically shaped twocomponent handles Cutting width 24 4 993 00 011 111 4 99 024 without support with support suitable for 00 suitable for 011 max cutting depth 80 (variable) 4 993 011 20 4 993 00 4 99 024 4 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

5 Voltage testers 1 2 volt, handle made of cellulose acetate, colourless, transparent, insulated blade, works with singlepole to earth, captive resistance and glow discharge tubes, not replaceable, GS tested Blade width 5 Blade length 5 5 3 35 0 7 135 5 Voltage testers VDE insulated singlepole voltage tester according to DIN 5780/ / VDE 080/ Up to 2 V alternating voltage to earth VANADIUMEXTRA blade, highgloss polished and chrome plated, hardened over the whole length, tip tempered with black surface finish Cellulose acetate handle, clear, transparent, shockproof with clip 5 Blade width 5 Blade length 35 42 134 5 00 Voltage testers 1 2 volt, according to VDE 080/ and DIN 5780/, handle made of black cellulose acetate, blade insulated, works with single pole to earth, detectable indication due to large glow discharge lamp, captive resistance and glow discharge tubes, nonreplaceable, GS tested 5 00 Blade width 5 00 Blade length 5 00 3 35 70 15 185 5 0 Extralow voltage detector 24 volt, brass housing, with connection cable and alligator clips, with needle tip for testing through car paints or cable strands, tip can be unscrewed Spare lamp 5 0 5 009 Voltage testers Voltage tester with cable test, low power consumption of 15 ma, the pin of the car check is equipped with a sliding mechanism which makes it unnecessary to strip insulation for the purpose of testing, cable length 130 cm, weight 57 g Model Nominal voltage range 5 009 V DC Car Check 348 Ø 12 Cable length 4 Polarity (+/) ja 5 0 5 009 Size 137 x 21 x 18 Voltage testers / Knives / Soldering equipment Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 47

5 008 Voltage tester, noncontact : Testboy Contactless voltage tester with visual display Integrated highperformance LED torch For fast and precise testing of live conductors! 10V AC TÜV/GS IEC/EN 1 3 year warranty 5 008 1: Testboy 1 Contactless voltage tester with visual display Integrated highperformance LED torch For fast and precise testing of live conductors! V AC TÜV/GS IEC/EN 1 5 008 1 : Testboy Contactless magnetic field tester with visual display and integrated highperformance LED torch TÜV/GS IEC/EN 1 The scope of supply of all models includes: 2 x batteries 15V AAA Micro 5 008 Model 5 008 Measuring range Size Testboy Testboy 1 Testboy 1 1 0 V AC 12 0 V AC all magnetic fields x 25 x 25 x 25 5 011 Testboy 40 N voltage tester For measuring direct and alternating voltages from to 400V Phase search to the protective conductor Userfriendly design with rubberised rubber handle TÜV/GS tested Overvoltage category CAT III 00V 5 011 040 Measuring range V 5 011 Display Size Weight g Voltage testers / Knives / Soldering equipment 400 040 visual, 8 LEDs 5 013 Testboy 0 N digital multimeter With integrated torch and contactless voltage sensor (detects alternating voltages through the insulation) Breakproof ABS housing Acoustic signal if resistance < 1 ohm ACV bandwidth 400 Hz Overvoltage category CAT III 00V Measuring range V up to 00 5 013 020 Display visual, LCD x 0 x 30 Size 140 x 70 x 35 Batteries 2 x 15 V AAA LR 03 5 013 020 48 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

5 015 Voltage testers According to new international voltage tester standard IEC/ EN 12433 (DIN 082401) increases safety when working with live voltages 004 013 015 DUSPOL DUSPOL DUSPOL DUSPOL digital plus analog combi compact Display LCD digital Plunger coil/led LED/LCD LED Display levels 15 7 V 12 7 V 12 7 V 12 7 V Continuity test LCD 00 kw Phase sequence test Yes/LCD Yes/LCD Singlepole Yes Yes Yes Phase test LCD LCD LCD Polarity test Yes/LCD Yes/LED Yes/LED Yes/LED Load application Yes Plunger coil Yes Yes via pushbutton IS = ma IS = ma IS = ma IS = ma Vibration alarm Yes Yes Measuring point lighting Yes LED Degree of protection IP4 IP4 IP4 IP4 5 015 004 013 015 Note: Voltage testers/detectors which are used on electrical systems up to 0 V must conform with the new standard IEC/EN 12433 5 015 Continuity and voltage tester, contactless 020: Dutest Benning Reliable determination of incorrect wiring, contacting errors and cable interruptions High and lowresistance continuity test Acoustic indication via loud growler Visual display via highcontrast LEDs Luminous torch function Noise (external voltage) protected up to 400 V : Testboy 20 Conductor and continuity tester with integrated highperformance LED torch function Acoustic and visual display, Current warner Contactless voltage test, voltage proof up to 400V CAT III 400V, TÜV/GS IEC/EN 1 DUTEST Testboy 20 Display LED LED Continuity test Buzzer + LED Buzzer + LED 900 W/90 kw 02 ohm Voltage range voltage proof up to 400 V Degree of protection IP 40 IP 44 Protection class (3) Cat III Measuring range all magnetic fields Size 125 x 9 x 3 x 0 x 30 5 015 020 5 015 020 5 015 Note: Voltage testers/detectors which are used on electrical systems up to 0 V must conform with the new standard IEC/EN 12433 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom Voltage testers / Knives / Soldering equipment 49

Voltage testers / Knives / Soldering equipment 5 024 Voltage tester Twopole voltage test for direct and alternating voltages from 1290V Acoustic continuity test Phase sequence test FI/RCD tripping (30mA) CAT IV 0V, TÜV/GS IEC/EN 12433 020: Profi LED With LED display 030: Profi LCD With LCD display Resistance measurement up to 0 ohm Scope of supply: 2 x batteries type AAA Display LEDs LCD 35digit 5 02 Voltage testers : Volt Check 31 PTCcontrolled, electronic voltage tester for working on electrical systems and for testing for safe isolation (disconnection) from supply direct and alternating voltage from V 400 V 005: Combi Check 13 Phase sequence display with clear statement Measuring range for direct and alternating current measurements from 90 V Acoustic signal for voltage and continuity test as well as phase test Acoustic indication of the conductor resistances for continuity test < 0 kw With test tip lighting 0: Digi Check 32 Twopole microprocessor controlled voltage tester Fourdigit LCD display Large measuring range from 5 V to 90 V Enables continuity and semiconductor test The display can be frozen with the HOLD button for measurements in hard to access places Model Volt Check 31 Combi Check 13 Digi Check 32 5 02 005 0 Size 190 x 25 x 19 230 x 55 x 34 223 x x 3 5 028 Voltage and continuity tester MultiSafe DSP 2 Voltage tester for applied current < 00 V Absolutely safe test tool with five test functions for all areas of power engineering Protective resistors in both test tips Voltageproof over 12kV CAT IV Voltage up to 1 V Resistance up to 1999 kw Rotary field, phase and polarity tester Fully automatic test sequence Clear signals Robust housing Multisafe DSP 2 5 024 020 030 5 028 Voltage V ( AC/DC) 1290 1290 Resistance ohm 00 00 acoustic signal ohm ~ 35 Mains voltage range V LED version Weight g 400 AC/DC 70 90 AC/DC 135 5 90 AC/DC 5 024 020 5 024 030 phase display V AC > V AC > V AC LCD version Temperature C 55 55 Power supply V 2 x 15 2 x 15 5 02 5 02 005 5 02 0 5 028 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

5 017 Digital multimeter Basic measuring types for electricity, voltage, resistance, continuity, diode, capacity and frequency Automatic and/or manual measuring range selection, Overload protection in all areas, automatic cutout if not used, robust housing types Benning Benning MM1 MM3 Scope of display 3 1999 Basic accuracy 05 % 05% Voltage AC 1 mv 00 V 01 mv 00 V Voltage DC 01 mv 00 V 01 mv 00 V Current AC 01 μa 20 A Current DC 01 μa 32 ma 01 μa 20 A Resistance 01 W 32 MW 01 W 20 MW Continuity/diode Yes Yes Frequency 1 Hz khz Capacity 1 pf μf Temperature Interface Software Memory Hold Data logger function Method of measurement RMS RMS Measurement category CAT I II 00 V CAT II 00 V 5 017 5 019 Digital current probe multimeter for safe and contactless measurement of higher currents Direct and alternating current measurement up to 0 A AC/DC Benning Benning CM2 CM3 Scope of display 3999 1999 Basic accuracy 05% 190% Voltage AC 01 mv 00 V Voltage DC 01 mv 00 V Current AC ma 300 A 01 A 00 A Current DC ma 300 A 01 A 00 A Resistance mw 40 MW Continuity Yes Frequency MIN/MAX memory/ MAX ZERO function ZERO Measured value/ HOLD HOLD Peak memory Method of measurement RMS RMS Pincer opening max 25 38 Measurement category CAT II 00 V CAT II 00 V 5 019 75 422 Tool bag for precision tools padded bag for sensitive equipment Two pockets with zip Handle, loop, belt Supplied without tools For other tool storage systems, please refer to our Plant & Equipment catalogue Dimensions cm 24 x 18 x 3 75 422 Weight g 700 75 422 Voltage testers / Knives / Soldering equipment Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 51

5 032 Insulating tape made of black plastic m 25 5 032 Width 19 5 032 5 038 Fish tapes Perlon wires made from reinforced BayerPerlon Monofil, with solid steel ends and additional search springs, approx 130 long, pulling eyebolts on both sides m 20 5 038 021 023 5 038 5 040 Adapter screw fitter Adapter and contact screw fitter combined, can be used for 2 3 A adapter screws by rearranging, insulated handle 5 040 5 040 042 5 042 5 041 Scalpel For large stresses Handle made of forged steel, chromeplated completely made of steel 125 Spare blades, pack of 5 041 1 5 041 5 042 Safety/automatic knife If the blade slips from the material being cut the blade automatically retracts into the handle body made of die cast zinc, ergonomic shape with 1 trapezoidal blade (0 x 19 x 05 ) 5 years warranty automatic retraction Voltage testers / Knives / Soldering equipment 142 5 042 5 045 Allpurpose knife strong housing design ensures long durability Blocking mechanism prevents the blade from moving onepiece construction for easy blade change, without additional tools Up to 7 spare blades can be stored in the knife Lightweight for fatigue free working Ergonomically shaped handle Including 3 trapezoidal blades 15 5 045 For right and lefthanded persons 5 042 5 045 52 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

5 047 Allpurpose knife Professional knife Ergonomically shaped Robust design yet lightweight Ideal for cutting carpet, cork, vinyl, roofing, gypsum boards The blade is safely locked with the help of the brass button Including 3 blades : Case for titanium knife with practical belt loop 185 Case 5 047 5 047 5 0 Bag for all allpurpose and safety knives, made of wearproof BTex with slidein module for blade dispenser, belt loop and Velcro fastening 180 5 0 5 0 5 054 Combi film cutter Safety due to concealed blade, handle made of glass fibre reinforced polyamide, substantially easier blade change, integrated metal platelet for slitting open the adhesive tapes of the cardboard box (can also be removed), effortlessly cuts thick films and foils, leather, cardboard box strapping made of plastic and safety straps, TÜV tested Important: Always cut strapping of cardboard boxes at 45 angle 5 054 155 Spare blade 5 054 5 07 01 5 08 Allpurpose knife with fixed blade, allpurpose knife, body made of die cast zinc, ergonomic shape, with 1 trapezoidal blade (0x19x05) 5 years warranty 5 08 5 08 140 477 5 070 Allpurpose knife Safety knife with 5 blade adjustment settings, body made of die cast zinc, ergonomic shape, easy to push slider thanks to spring system, with 1 trapezoidal blade (0x19x05) 5 072 Allpurpose knife, snapoff blade ergonomically formed all metal, painted, with patented blade lock, various cutting settings, retractable blade, in the pushed forward position the blade can be fixed by the clamping system, as a result increased safety, including five spare blades in the handle Cutter blade 180 90 155 15 135 5 070 5 072 5 years warranty 5 070 5 072 5 072 Voltage testers / Knives / Soldering equipment Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 53

5 073 Allpurpose knife, snapoff blade 009: BIKO snapoff blade knife, with 3 blades, 9 (1 blade fitted, 2 blades in the magazine), stainless steel blade guide, body made of die cast zinc, ergonomic shape, lock button, with protective cap 018: BIKO snapoff blade knife, with 3 blades, 18 (1 blade fitted, 2 blades in the automatic loading magazine), the blades are loaded automatically, stainless steel blade guide, body made of die cast zinc, ergonomic shape, with India rubber inlays for optimum holding of the knife in the hand 5 years warranty 009 Cutter blade 90 180 145 15 5 073 009 018 highquality professional version all metal 018 5 074 Allpurpose knife, snapoff blade Blade guide made of metal Handle made of unbreakable plastic Ergonomic shape 051: Autostop locking system With practical fixing clip 053: With pushbutton mechanism With practical packaging and paint tin opener 055: With thumbwheel lock Antislip rubber handle inlay With practical packaging and paint tin opener 5 074 053 5 074 051 Cutter blade 90 180 180 5 074 051 053 055 Weight g 8 74 80 15 155 5 074 055 5 07 Blades 004 005 030 035 040 breakproof! 045 Voltage testers / Knives / Soldering equipment Name 5 07 Size suitable for knives Pack of Cutter blade 00 9 x 05 TIN 5 072, 5 073 009, 5 074 051 Cutter blade 000 18 x 05 TIN 5 072, 5 073 018, 5 074 053, 5 074 055 Cutter blade 004 18 x 112 x 05 Predetermined 5 072, 5 073 018, 5 074 053 snap off points 5 074 055 Cutter blade 005 9 x 95 x 05 Pred snap off points 5 072 Film blade 01 43 x 04 Standard strength steel 5 054 Trapezoidal blade 037 52 x 05 TIN 5 073 018, 5 074 053 5 074 055 Trapezoidal blade 030 53 x 05 Ice hardened 5 073 018, 5 074 053, 5 074 055 Trapezoidal blade 035 0 x 05 Ice hardened 5 073 018, 5 074 053 5 074 055 Trapezoidal blade 040 0 x 05 Bimetal 5 073 018, 5 074 053, 5 074 055 Hook blade 045 x 05 Ice hardened 5 073 018, 5 074 053 5 074 055 5 077 Belt knife 1piece, folding, 70 lightweight heavy 5 077 5 077 180 205 5 077 Weight g 84 130 54 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

5 079 INOX work knife 1piece, with serrated cutting edge, rustproof with special rigid plastic shells, blade locking via pushbutton (safety knife) 195 5 079 5 079 5 080 Insulation knife Stainless steel, hardness: 57 HRc, doublebladed, saw finish for dense and hard material, serrated for soft and lightweight material, blade tip suitable for drilling holes, eg for wire ropes, cables, stable, nevertheless lightweight and handy polypropylene handle, with finger guard 5 080 5 080 Blade length 280 5 080 5 082 Multifunctional tool made of stainless steel, with the following tools: Combination pliers with wire cutters, 3 slothead screwdrivers, Phillips screwdriver, awl, ruler with metric and imperial scale 20 cm long, can / bottle opener, metal / wood file, knife, with belt bag 5 082 folded together 5 082 5 083 Multifunctional tool Material: % stainless steel, 14piece in leather holster : With new pliers design and scissors with teeth for good grip and clean cutting Zytel handle inserts ensure ergonomic handles : Successor of the highly popular Wave multitool With 2 doublesided bits: Phillips and jeweller s screwdriver The original! 5 083 Weight g 5 083 Fuse TM Wave 4 TM 170 241 2 2 5 083 5 085 Pocket tools Original Swiss tool from VICTORINOX highquality, precise and functional Number of functions 11 11 34 5 085 005 007 0 90 1 90 005 Special / additional features Ball point pen, lamp function (red) Tooth pick, tweezers, can opener Large blade latches into place (fixed) Scissors, pliers, double bits 007 Voltage testers / Knives / Soldering equipment Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 55

5 2 Magnastat soldering iron WELLER Mains voltage soldering iron with automatic temperature control and energy reserve, the Magnastat system provides aboveaverage maintained heat supply and limits the energy supply when the tool is running at no load, the working temperature is chosen via solder tips with temperature sensor, 230 V 5 2 Power watt 5 2 W 1 C 0 5 4 Longlife soldering tips WELLER with heat sensor, made of copper, with special scale resistant electroplated coating, for soldering iron Prod No 5 2 5 4 Width Temperature range 5 4 CT 5 A7 004 CT 5 C7 007 Further soldering tips available on request 1 32 370 C 370 C Flat shape Flat shape 5 115 Magnastat soldering station WELLER Extralow voltage soldering iron with magnetic temperature sensor, automatic control ensures fast heating of the soldering tip and maintains the heat supply during soldering, the temperature is adjusted by changing the soldering tip, temperature range 20425 C, isolating transformer 220/24 volt, soldering iron TCPS, 24 volt, with soldering tip PTB7 and soldering iron holder with cleaning sponge 5 115 5 115 1 5 115 Power watt Voltage Volt Voltage testers / Knives / Soldering equipment WTCP51 Replacement soldering iron TCPS, 24 volt, watt with soldering tip ETB Replacement magnetic switch for soldering iron TCPS Replacement cleaning sponges for soldering iron holder (pack of 5) 5 117 Longlife soldering tips WELLER for soldering iron Prod No 5 115, made of copper, electroplated finish, with temperature sensor Size PT H7 PT A7 PT B7 PT C7 PT K7 PT L7 PT 07 PT L8 PT M8 PT 08 5 117 004 00 008 0 012 01 112 114 11 1 3 4 Width 08 1 24 32 12 2 08 2 32 08 Temperature C 370 370 370 370 370 370 370 400 400 400 220/24 flat flat flat flat Long Long long, tapered Long Long tapered 5 117 5 117 5 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

5 Electronic soldering stations WELLER All stations have the following coon features: Protection class I, equipotential bonding (normal state hard earthed), antistatic housing, automatic tool detection, EGB proof 201 and 205 for applications with leadfree solder 5 5 201 5 Power watt Soldering iron WS 51 Replacement soldering irons WS 81 WSD 81 1 201 205 80 80 analog electronic controls Temperature adjustment with rotary potentiometer Temperature range: 1 4 C LR 21, 24 V, watt, with soldering tip analog electronic controls Temperature adjustment with rotary potentiometer Temperature range: 1 4 C Key switch digital electronic controls Temperature adjustment via pushbuttons Temperature drop after time (setback) 3digit digital display for ACTUAL and SETPOINT VALUE Temperature range: 4 C LR 21 24 V watt ET series soldering tips WSP 80 24 V 80 watt LT series soldering tips see 5 121 WSP 80 24 V LT series soldering tips see 5 121 5 121 Soldering tips WELLER for soldering station Prod Prod No 5 5 121 5 121 Width 5 121 ET H ET A ET B ET C ET D ET K ET L ET M ET S ET 0 004 00 008 0 012 014 01 018 020 LTH 2 LTA 4 LTB LTC 8 LTD 1 LTK 112 LTL 114 LTM 11 LTS 118 5 130 Multitip series, electronic soldering iron 230 volt low weight compact design very good guiding due to short distance between solder tip and handle industry tested PTC heating elements Soldering tips under 5 137 Power watt 15 25 5 130 Heating up time approx sec 0 0 Soldering tip temperature 3 C 4 C 08 1 24 32 4 12 20 32 04 08 Flat shape Flat shape Flat shape Flat shape Flat shape Flat shape Flat shape Flat shape Long shape, tapered Long shape, tapered 5 130 Voltage testers / Knives / Soldering equipment Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 57

5 137 ERSADUR longlife soldering tips nickel plated, for soldering irons Prod No 5 130 and 5 18 bevelled 3 pencil point 11 chisel shaped 2 bevelled 41 pencil point 11 chisel shaped 31 watt 15 15 15 25 25 25 5 137 1 4 8 201 204 208 5 140 Standard electric soldering iron 230 volt tried and tested tradesman soldering iron for work with greater heat requirement, eg tinplating copper cables 15 2 to 2 can be used for joining copper plates and pipes as well as for lead glazing Soldering tips under 5 143 5 140 5 141 5 141 Replacement heating element for ERSA Standard electric soldering iron Prod No 5 140 Power watt 5 140 5 141 Heating up time approx min Soldering tip temperature 80 1 3 3 3 400 C 4 C 4 C 5 143 ERSADUR longlife soldering tips for Standard soldering iron 5 140 5 143 Voltage testers / Knives / Soldering equipment bent, chisel shape 31 bent, chisel shape 48 chisel shape 48 bent, chisel shape 53 chisel shape 53 Power 5 143 watt 80 1 80 4 1 201 1 204 5 145 Electric hatchet style soldering iron 230 volt universal soldering iron for sheet metalworking suitable for installation work as well as working on collectors and copper rails also suitable for car body evening out work and lead glazing 5 147 Replacement heating element for electric hatchet style soldering iron Prod No 5 145 Power watt 300 5 5 145 5 147 Heating up time approx min 5 5 7 Soldering tip temperature 470 C 470 C 00 C 5 143 5 145 58 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

5 149 Copper soldering tips scale resistant, for electric hatchet style soldering iron Prod No 5 145, both sides with 0 angled face chisel shape 18 chisel shape 25 Power watt 300 5 149 004 5 Electric soldering iron 230 V allpurpose soldering iron tried and tested millions of times diverse uses for trade and service soldering tasks easy to fit rubber support disc 5 Power watt 5 Heating up time min Soldering tip temperature 30 40 2 2 380 C 420 C 5 13 ERSADUR longlife soldering tips for electric soldering iron Prod No 5 Power 5 13 watt chisel shaped, straight 30/40 angled 30/40 004 pencil point 30/40 008 5 13 5 18 Electronic soldering iron 230 volt low weight compact design very good guiding due to short distance between solder tip and handle industry tested PTC heating elements 5 18 Power watt 5 18 Heating up time sec Soldering tip temperature C 1 0 For soldering tips, see Prod No 5 137 1 and 5 137 4 3 5 174 MultiTC electric soldering iron Powerful temperaturecontrolled allpurpose soldering iron temperature sensor positioned directly under the soldering tip PTC heating element for fast heating up very high heating efficiency due to internal heating of the soldering tips performance class comparable with 1W standard iron very large choice of tips can be used for microelectronics through to tinning copper cables and lead glazing by dispensing with mains transformer and using heat resistant mains cables is ideally suited for service and maintenance For replacement soldering tips, please refer to Prod No 5 185 5 174 Voltage: Power: Heating up power: Heating up time: Control technology: Temperature range: Weight without supply cable: 070CD the soldering station in the handle 5 174 230 V~ 75W / 3 C up to 285 W approx 35s to 300 C SENSOTRONIC 2 4 C approx 0 g ERSA MultiTC with ERSADUR longlife tip 842 CD and A 18 stands Voltage testers / Knives / Soldering equipment Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 59

5 177 MultiSprint quick soldering gun 230 volt PTC heating element with 1 W heating output very large choice of tips for microelectronics through to lead glazing high efficiency due to internally heated solder tips heat supply is controlled by pressing the pushbutton particularly suitable for service technicians Power watt 5 177 75 For soldering tips, see Prod No 5 185 Heating up time 20 s 5 177 5 181 Soldering station 0 W voltage Preferably suitable for smaller and mediumsized soldering areas Electronic temperature control (ERSA RESISTRONIC) With ceramic PTC heating element Fast heating up due to high initial power High thermal efficiency due to internal heating Analog 0 model : With Basic tool soldering iron Analog 0A model : Completely antistatic according to MILSPEC/ESA standard With Ergo tool soldering iron 5 181 RDS 80 model : 80 W voltage Power Bargraph display Calibration function Power Off function With RT80 soldering iron Model 5 181 Voltage watt Heating up time s Temperature range C 5 181 Analog 0 Analog 0 A RDS 80 0 0 80 0 0 40 1 4 1 4 1 4 Voltage testers / Knives / Soldering equipment 5 183 DIG0 soldering station complete with Power Tool soldering iron microprocessor controlled soldering station, Continuously variable control Digital setpoint and actual value display 4 program memory for temperature setpoint values Automatic tool detection Standby function 0 0 minutes Highly precise temperature control with digital PID algorithm based on sensotronic principle PTC heating element with high heating output Calibration of the tip temperature with the specified setpoint Internally heated tips Separate connection for equipotential bonding For soldering tips, see Prod No 5 185 DIG 203A Technical data 5 183 Supply voltage: 230 V~, 0 Hz Secondary voltage: 24 V~ Power: 80 W Temperature range: continuously variable C 4 C Functional display: 4digit LED display with menu control : totally insulated, antistatic according to MILSPEC/ESA standard Heating up time: approx 40 s (to 280 C) 5 183 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

5 185 Longlife soldering tips for fast soldering gun Prod No 5 177 and for soldering stations Prod No 5 181, 5 183 5 185 5 185 5 185 5 185 005 832 UD 832 SD 832 BD 832 KD 832 CD 832 ED 832 VD 004 005 00 007 pencil tip, extended, 04 diameter pencil point, extended, 08 diameter pencil point diameter chisel shaped, extended, 22 diameter chisel shaped 22 chisel shaped 32 chisel shaped 5 185 00 5 185 007 5 188 Independent 75 gas soldering set Basic Set Maintenance and service technicians with piezo ignition continuously controllable output after completing the soldering work, simply put on the cap run with standard butane large choice of tips supplied in transport case with reserve space for other tips Areas of use: Electronics, electrical engineering, installation, model making Scope of supply a gas soldering iron with fitted catalyst tip, a stand and a sponge holder with cleaning sponge for demanding soldering tasks without power supply 5 188 005 5 188 Independent 130 Basic Set gas soldering set as gas soldering set Independent 75; however, with an output of 25130 watt Power W 5 188 Heating up Soldering Weight Ignition time tip tempera Sec ture max g 5 188 025 15 75 25 130 005 30 to 183 C approx 0 C 73 Piezo 025 30 to 183 C approx 121 Piezo 580 C 5 189 Accessories for gas soldering sets Prod No 5 188 Name Replacement gas cartridge Replacement soldering tip Replacement soldering tip Replacement soldering tip Hot gas nozzle Reflector plate Burner nozzle Hot blade Replacement soldering tip Replacement soldering tip Replacement soldering tip Hot gas nozzle Reflector plate Burner nozzle Hot blade 5 189 00 0 013 014 015 01 017 018 1 113 114 115 11 117 118 ml chisel shaped, Ø chisel shaped, 32 Ø bevelled, 48 Ø for hot gas nozzle Tip, chisel shaped Tip 32, chisel shaped Tip 48, bevelled suitable for 5 188 005 5 188 005 5 188 005 5 188 005 5 188 005 5 188 005 5 188 005 5 188 025 5 188 025 5 188 025 5 188 025 5 188 025 5 188 025 5 188 025 5 189 Voltage testers / Knives / Soldering equipment Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 1

5 20 VAC X desoldering gun the standard multipurpose desoldering pump high intake capacity, ergonomic shape The antistatic setup enables desoldering work on modules and subassemblies at risk from electrostatic The long, slender desoldering tip can also be used on very tightly assembled printed circuit boards Cleaning the pump and replacing the desoldering tips is easy 5 207 Replacement desoldering tip Pack 5 20 0 Intake volume ccm 113 5 20 0 5 207 0 91 540 Clevistype gas igniter with cylindrical file and flint Flint 91 540 3 x 20 201 91 540 201 91 540 Gas igniter gun with cylindrical file and flint Flint 91 540 2 x 5 211 91 540 211 91 541 Flints for gas igniters Voltage testers / Knives / Soldering equipment Dimension for gas igniters 91 541 Pack 30 x 91 540 201 301 2 x 91 540 211 302 92 995 Solder bars to DIN EN 29453, leadfree Threesquare bars, 400 long, Pb free Name Melting range 92 995 C Sn955 Ag 38 Cu 07 217 1 Sn993 Cu 07 227 3 SSn 97 Ag 3 221 240 5 SSn 97 Cu 3 230 2 7 91 541 92 995 2 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

92 99 Kolo solder wire to DIN EN 29453 soldering flux filled soft solder wire to DIN EN 294 541, 111B (FSW 31) for electrical engineering and telecounications soldering Soldering flux based on natural or modified natural resins (colophonium) without additives The soldering flux residues can remain in the soldered area Ø Designation Tin content Coil size 92 99 % kg SPb 0 Sn 40 40 025 201 SPb 0 Sn 40 40 05 202 SPb 0 Sn 40 40 203 15 SPb 0 Sn 40 40 025 211 15 SPb 0 Sn 40 40 05 212 15 SPb 0 Sn 40 40 213 20 SPb 0 Sn 40 40 025 221 20 SPb 0 Sn 40 40 05 222 20 SPb 0 Sn 40 40 223 30 SPb 0 Sn 40 40 025 231 30 SPb 0 Sn 40 40 05 232 30 SPb 0 Sn 40 40 233 SSn 0 Pb 40 0 025 241 SSn 0 Pb 40 0 05 242 SSn 0 Pb 40 0 243 15 SSn 0 Pb 40 0 025 251 15 SSn 0 Pb 40 0 05 252 15 SSn 0 Pb 40 0 253 20 SSn 0 Pb 40 0 025 21 20 SSn 0 Pb 40 0 05 22 20 SSn 0 Pb 40 0 23 30 SSn 0 Pb 40 0 025 271 30 SSn 0 Pb 40 0 05 272 30 SSn 0 Pb 40 0 273 92 99 5 209 Solder wire dispenser optimum addon for the soldering workplace heavy baseplate excellent stability holds of different soldering wire reels (2/0/0 g) optimum unreeling due to conical centring nut flexibly supported solder wire guide Addon kit for 2nd real available as an option Supplied without solder wire Coil Ø 14 5 209 For solder wire reels g 2, 0, 0 5 209 92 998 Soldering fluid, DIN EN 294541, 311A (FSW 12) Soldering flux for soft soldering of iron, steel, copper, brass, lead and tin plate (for general soldering work) 92 998 ml bottle 1 2 ml bottle 2 0 ml bottle 3 0 ml bottle 4 92 998 Soldering paste to DIN EN 294541, 311C (FSW 21) Soldering flux for soft soldering of copper and copper alloys for general soldering work 92 998 g tin 202 2 g tin 203 0 g bottle 205 0 g bottle 207 92 998 92 998 Voltage testers / Knives / Soldering equipment Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 3

5 52 Aonium chloride blocks for cleaning soldering irons Size 5 x 45 x 40 x 45 x 20 5 52 Supplied form open Plastic tub 5 528 Special plastic bottle with sealing lip screw fitting, made from unbreakable, acid and chemical resistant polyethylene, transparent, therefore contents and quantity can always be checked printed with Lötwasser (soldering fluid) 5 52 For volume ccm 5 528 1 yellow transparent 5 528 5 15 Multipurpose soldering lamp with burner for soft and hard soldering and for other coercial or DIY work, onehand operation, very fine gas supply control possible, cartridge is protected by a steel bell Very high impact strength, handle made of polypropylene For cartridges, see Prod No 5 18 5 15 Onehand operation due to adjusting knob with automatic ignition with automatic ignition and pilot light lever 005 5 15 5 18 Cartridge with powerful butane/propane mix suitable for soldering lamps Prod No 5 15 Volume gr 5 18 190 5 18 Voltage testers / Knives / Soldering equipment 5 24 Additional burner for soldering lamps Prod No 5 15 Name Hard solder burner Flat burner Soldering iron Fine solder burner 5 24 004 with distinct, bundled flame for hard soldering in the copper pipe installation and for other hard soldering work on iron, steel, Inox and aluminium with wide flame for uniform heating of surfaces, for burning off paint, tinplating, browning wood, etc for soft soldering work without direct flame, attach to fine solder burner Prod No 5 24 004 with its own nozzle, narrow, pointed flame for soft and hard soldering of intricate soldering points 5 24 5 24 5 24 5 24 004 4 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

Wad punch DIN 7, Shape A, extra quality, interior conical, painted handle, punch bright, for production of seals and sealing rings from rubber, leather, felt, etc 005 Hole inserts for trouble free punching of rubber, cardboard, cork, felt etc, by placing two punchers in the holder, sealing rings can be made in one work step Number of blades 15 20 25 30 Size 2 3 4 5 7 8 9 11 12 13 14 15 1 17 18 19 20 21 22 23 24 25 2 27 28 29 30 32 34 35 3 38 40 42 44 45 4 48 52 55 5 58 0 5 70 005 004 005 004 005 00 007 008 009 0 011 012 013 014 015 01 017 018 019 020 021 022 023 024 025 02 027 028 029 030 032 034 035 03 038 040 042 044 045 04 048 0 052 055 05 058 00 05 070 Hole Ø 2 increasing 3 20 3 30 3 40 3 3 0 005 Punching tools / Marking equipment / Pneumatic accessories Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 5

Screw punch / Sheet drill Punch holes in thin walled materials quickly, effortlessly, neatly and without fins with few hand motions Improved support using 3point cut, therefore less deformation of the punched part This prevents damage to the tension bolt The ball bearing makes handling even easier and faster Force exertion is reduced by approx 7% Before using the screw punch the tension bolt must absolutely be lubricated with cutting spray or cutting paste The metric tension bolts on the RUKO screw punches are the highest quality grade and therefore are designed for extreme loads If lost, conventional fine thread metric screws can also be used for a short term replacement Especially well suited for use with spanners, hand hydraulic punches or foot hydraulic punches Special sizes are available on request Guideline values for the use of screw punches Tension bolt Steel sheet Stainless steel sheet Nonferrous metal and lightalloys Plastics M 80 x M x M x 15 M x 15 2 2 3 3 1 1 2 2 4 4 4 4 4 4 4 4 0 Screw punch / Sheet drill 3point cut stamp Material thickness up to 4 Material: special thickness Tension bolt: metric fine thread above MF strength class 129 Suitable for steel sheet, stainless steel sheet, nonferrous and light alloy metals, plastics 012 Screw punch / Sheet drill Design like 0, however with ball bearing screws Punching tools / Marking equipment / Pneumatic accessories Hole Ø 127 140 152 15 180 18 204 2 220 225 240 2 254 270 283 300 3 320 325 3 370 380 400 405 470 480 0 5 5 540 5 00 35 Opening dimensions M 12/ PG 7 PG 9 M 1 PG 11 M 20 / PG 135 PG 1 M 25 PG 21 M 32 PG 29 M 40 PG 3 M PG 42 ~ PG 48 M 3 Tension bolt MF 8 MF 8 MF MF MF MF MF MF MF MF MF MF MF MF MF MF MF 12 MF 12 MF 12 MF 12 MF 12 MF 12 MF 12 MF 12 MF 12 MF 1 MF 1 MF 1 MF 1 MF 1 MF 1 MF 1 MF 1 MF 1 MF 1 0 Standard 127 140 152 15 180 18 204 2 220 225 240 2 254 270 283 300 3 320 325 3 370 380 400 405 470 480 0 5 5 540 5 00 35 012 Ball bearing 152 15 180 18 204 2 220 225 240 2 254 270 283 300 3 320 325 3 370 380 400 405 470 480 0 5 5 540 5 00 35 with ball bearing screws 0 012 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

018 Screw punch sets in plastic case Set contents screw punches Ø 152 (PG 9) 18 (PG 11) + 204 (PG 135) 225 (PG 1) + 320 + 283 (PG21) 1 cone cutter drill bit size 1 1 cutting paste 30 g 2 tension bolts M x x 45 quality grade 129 1 tension bolt M 12 x 15 x 55 quality grade 129 8 screw punches Ø 152 (PG 9) 18 (PG 11) 204 (PG 135) 225 (PG 1) 283 (PG 21) 37 47= PG 3 54= PG 47 1 cone cutter drill bit size 2 Cutting paste 30 g 2 ball bearing screws M x x quality grade 129 1 ball bearing screw M 12 x 15 x 0 quality grade 129 1 ball bearing screw M 1 x 15 x 70 quality grade 129 018 009 018 018 009 022 Screw punch sets with compact hydraulic punch in plastic case Set contents 022 1 Hydraulic compact hand punch 8 screw punches Ø 152 (PG 9) 18 (PG 11) 204 (PG 13) 225 (PG 1) 283 (PG 21) 370 470 540 1 cone cutter drill bit size 2 1 cutting paste 30 g 1 spacer bushing 1 adapter screw M x mounting 3/4 UNF 1 adapter screw M 12 x 15 mounting 3/4 UNF 1 adapter screw M 1 x 15 mounting 3/4 UNF 025 Spare parts compatible with screw punch 022 Designation 025 1 adapter screw M x mounting 3/4 UNF 1 adapter screw M 12 x 15 mounting 3/4 UNF 1 adapter screw M 1 x 15 mounting 3/4 UNF Replacement screw M 8 x x 40 quality grade 9 Replacement screw M x x 45 quality grade 129 Replacement screw M 12 x 15 x 55 quality grade 129 Replacement screw M 1 x 15 x 0 quality grade 129 Replacement screw with ball bearing M x x quality grade 129 Replacement screw with ball bearing M 12 x 15 x 0 quality grade 129 Replacement screw with ball bearing M 1 x x 70 quality grade 129 035 Leveraction revolving punch pliers ergonomically shaped plastic handles with 2 25 3 35 4 45 punches 70% less force 2 037 Revolving punch pliers made of sheet steel with 2 25 3 35 4 45 punches 220 035 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 005 008 0 012 015 018 020 023 025 70% less force 025 0 018 025 020 025 035 037 037 Punching tools / Marking equipment / Pneumatic accessories 7

039 Circular template cutter with one blade, polished wooden handle and millimeter divisions, for cutting circular templates and sealing rings of rubber, leather, paper, pressboard and plastic By using an additional blade holder (see Fig 2) and another blade, sealing rings can be made in one work step Size 039 For circular Ø 039 Fig 2: incl additional blade holder and blade 1 3 400 049 Seal, ring and plate cutter device for fast cutting of seals, rings and plates of klingerit, rubber, asbestos, leather, felt, cardboard, plastic, hard plastics and soft metals, as well as all cuttable materials, the inside and outside cuts can be done with size 2 in one work step, fixed dimension scales are provided on the blade carriers for exact and fast setting of the cutting tools, the cutting tools are adjustable in every direction, a few turns are sufficient to perform a clean and errorfree cut, the operation of the device is easy and handy, including table and a blade of tool steel, cutting table thickness 20 Size Cutting range Cutting table 049 049 1 30 300 2 * 30 300 3 30 00 * Inside and outside cut at the same time 420 x 320 420 x 320 700 x 20 051 Replacement cutting blade for ring cutting device No 049 051 051 Tool steel Sintered carbide 051 Punching tools / Marking equipment / Pneumatic accessories Extensive range of sealing material available on request Contact your field sales technical consultant Novatec Premium II Kevlar fibres in a graphite compound Colour: blue with black honeycomb pattern and antistick coating Working temperature: max 2 C Pressure: max bar, Compliance with: DVGW, HTB; KTW; WRC; BAM; TAAir Intended use: Universal seal, for piping in the general chemical industry, in system, equipment and machine construction, and in the beverage and food industry, Available in plates with thicknesses of 05; ; 15; 20 und 30 Novaphit SSTC Graphite with expanded metal insert from 14404 Working temperature: max 5 C Compliance with: DVGW; HTB; KTW; WRC; BAM; Intended use: For piping in the general chemical industry, in system, equipment and machine construction, and in the beverage and food industry and power station area For all applications, even under extreme conditions and cycling load Available in plates in thicknesses ; 20 and 30 Other seal materials of fibre materials, eg (Novapress Universal) and elastomer materials such as NBR, EPDM and FPM are available in rolls or precut All seal materials can also be delivered as DIN or ANSI dimensions or cut to drawing on short order More flat seals, such as grooved, spiral and rubber steel seals on request Elastomer formed parts and Orings to standard or applicationspecific from NBR, EPDM, FEPV, PTFE and FFPM Axial face seals in various designs on request ibemo Kazakhstan 090301 Republic = of UNIT Kazakhstan, FOR PURCHASE West OF ONE Kazakhstan PACKAGING UNIT Oblast, PER ORDER Aksai, NUMBER Pramzone, PLEASE ALWAYS BKKS STATE NUMBER office OF complex ITEMS IN ORDER 8 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

3 Tool markers for selfmarking of numbers, with beaded edge and hanger hole, diameter 30, per piece Brass Aluminium 3 20 3 3 5 Marking template sets Numbers 0 9, zinc plate 7 Marking template sets Capital letters A Z, zinc plate Font height 5 0 9 7 A Z 30 40 0 80 030 040 0 00 080 030 040 0 00 080 5 7 1 Number punch sets Numbers 0 9, normal quality, for marking workpieces with a strength up to kp/ 2, hardness on the engraving 58 0 HRc, type face acc to DIN 1451, in plastic box 0 0 0 0 0 0 0 00 Font height 20 25 30 40 0 80 1 020 025 030 040 0 00 080 1 111 Letter punch sets Capital letters A Z, normal quality, for marking in workpieces with a strength up to kp/ 2, hardness on the engraving 58 0 HRc, type face acc to DIN 1451, in plastic box A A A A A A A AA Font height 20 25 30 40 0 80 111 020 025 030 040 0 00 080 114 Impact hand stamping tool Stamping number roller turns easily in every desired position and is locked by a fixing pin Part numbers can be set in seconds The set number can be read on the front of the holder in the field of view Compact design, marking in any desired work position possible With depth limiter Each stamping number roll has eleven position, including a blank space Special wheels (logos, symbols, letters) available on request Font height 114 max number of max length of stamping stamped digits 15 015 14 21 20 020 20 25 025 8 20 30 030 7 21 40 040 40 0 8 40 0 00 7 42 015 030 111 040 00 Punching tools / Marking equipment / Pneumatic accessories Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 9

115 Precision steel stamp Separate letters and numbers, which can be put together in a holder to mark a complete word, name or a part number Hardness: from 59 to 3 HRC Marking materials up to 1300 N/_ strength possible Clear, neat type face on all metals with the same quality with one stroke Faster and more efficiently implemented than individual stamps Carefully collected selection of steel types (letters, numbers, coas, periods, &symbol, diagonal lines and dashes) and diverse empty spaces, complete with a hand holder 030 and 0: Available in a sturdy plastic box with separate divisions for each type and space for a holder and application tools 00: Available in a sturdy wooden box with separate divisions for each type and space for a holder and application tools 115 Font height 115 Sizes of steel type Width Height Number of steel types in the holder Number of intermediate pieces 3 030 32 4 222 9 8 5 0 48 4 222 8 7 00 4 95 190 8 7 Punching tools / Marking equipment / Pneumatic accessories 11 Table marking device Marking options: Marking window: x Height of the part to be marked: up to 280 Font size: from 05 to 80 (in intervals of 01) Font types: Linear, angular, circular, inversed, mirror, reflex, CE Technical description: Power supply: 115 V, 230 V ( 0 Hz) Output: W : 420, Width: 270, Height: 740 Weight: 29 kg Marking tools for version: pneumatic = PN12, electromagnetic = EM 11 Available accessories on request: Service unit for the compressed air Thickness gauge Foot pedal for triggering the marking (for office or industrial environment) Control terminal for cycle start and cycle end Standard plate carrier (noise damper) Magnet clamper for nameplates Software for WINDOWS and RS 232 connection cable Motorised rotating axis Nameplate automation Barcode reader P 3000 PN P 3000 EM RPN 12 RPN 22 REM 11 Model Table device pneumatic Table device electromagnetic Replacement embossing tip for 11 Replacement embossing tip for 11 Replacement embossing tip for 11 11 020 021 022 Motorised rotating axis for marking round workpieces (circumference) and other accessories available on request Circular marking übersichtliches Display Also available as portable marking gun Use without PC 70 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

117 Compressed air engraving pen GST 540 for writing, engraving of hardened steels, metals, glass, plastic, ceramic and stone Simple tip change Extremely low vibration level Noise level under 5 db (A) 1 medium embossing needle (117021) included in scope of delivery Embossing tip made of Sintered carbide Frequency sec 117 Size Weight kg Air consumption m /min Vibration approx m/s Noise level db (A) Connection thread more compressed air tools are on page 1290 117 540 17 x 12 015 009 25 5 R 1/4 Replacement embossing tip for 117 fine medium coarse 117 020 021 022 118 Electroengraver in a set with diamond, Sintered carbide and hardened styluses, as well as two modeling tips for soft metals such as copper, tin and aluminium foil Output Watts 25 118 118 119 Freehand electric arc engraver Use: For marking all electrically conductive workpieces, such as hardened tools, templates, fixtures, machine parts, material samples, drills, milling cutters, measuring devices, reamers Application: The special transformer is switched by DC current between power and engraver, with electric engraving the holder should be held so that the electrode stands slightly vertical, when the workpiece is touched a short intensive arc forms, this burns the desired type face permanently in all metals, the tungstenthorium electrodes can be sharpened at any time with a file or grinding disk Device complete with 3 tungstenthorium electrodes and transformer, way controllable, in wooden box Connection voltage 230 V / Hz 119 Electric engraver for nonconducting materials available on request Spare and wear parts for 119 Spare part Engraving grip Primo for metal for electrodes Ø 14 x 25 3 tungsten electrodes Ø 14 x 25 25 tungsten electrodes Ø 14 x 25 Electrode size 119 004 005 00 14 x 25 119 004 119 005 119 00 119 Punching tools / Marking equipment / Pneumatic accessories Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 71

122 Labelling machines Label POINT 1 light, mobile hand unit for simple and fast jobs, for professional labelling ergonomic ABC keyboard up to two lines per label writes on 9 and 12 D1 labelling tape Selection between font sizes and 4 frames Print preview incl 12 D1 labelling tape blackonwhite 122 0 Label POINT 2 the ideal hand unit for frequent labelling work, up to mirror printing handy keyboard writes on, 9 and 12 D1 labelling tape used with batteries or power adapter (see 128) combinable font styles and effect up to two lines per label incl 12 D1 labelling tape blackonwhite 122 020 Label POINT 3 outstanding variety of functions, from electrical and technical symbols to barcode, the Label POINT 300 offers versatile character selection, which makes it the ideal labelling device for numerous work areas Memory for labels plus special functions for easy editing writes on, 9, 12 and 19 D1 labelling tape Barcodes: UPCE, Code 39, Code 128, EAN 13, EAN 8, UPCA combinable font styles and effect up to four lines per label used with batteries or power adapter (see 128) incl 19 D1 labelling tape blackonwhite 122 030 Model 122 Size Weight g Punching tools / Marking equipment / Pneumatic accessories Label POINT 1 Label POINT 2 Label POINT 3 0 020 030 124 Labelling device Label MANAGER 1 simple to use, easily manageable function keys large, partially graphic display ergonomic keyboard (Qwertz) navigation buttons patented RACE technology for fast access to umlauts (similar to SMS input on cell phones) for D1tape, 9 and 12 wide manual tape cutter 3 font types extensive symbol selection prints up to 2 lines use with 5 AAA batteries or power adapter Item no 128 incl 12 tape, blackonwhite Model Label MANAGER 1 124 015 98 x x 15 112 x 52 x 187 114 x 70 x 212 Size 170 x x 54 298 300 519 Weight g 3 124 015 72 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

127 Labelling device Label MANAGER 4 independent or PC linked use (DYMO software) Memory for 25 labels plus special functions for easy editing current date/time display, which can be printed on the label horizontal and vertical label printing navigation help for simple menu use storage of preferred formats writes on, 9, 12, 19 and 24 D1 labelling tape with 5 fonts as well as all Windows fonts (with PC connection) automatic tape cutting combinable font styles and effects up to five lines per label used with batteries or power adapter (see 128) Print logos and pictures/graphics with PC connection large display for optimum text input, correction and preview Barcodes: UPCE, Code 39, Code 128, EAN 13, EAN 8, UPCA incl 24 D1 labelling tape blackonwhite and PC labelling software Software download also from wwwdymode/kundendienst possible PCuse possible 127 004 Model 127 Size Weight g Label MANAGER 4 004 215 x 245 x 85 700 128 Power adapter compatible with labelling machines: 122 020 122 030 124 015 127 004 Size x 92 x 55 128 0 131 Labelling tape in cassette, selfadhesive, tape length 7 m, with slit back for simple peeling of labels compatible with No 122 127 Colour design black on transparent black on white red on white black on red black on yellow white on black blue on white 131 Width 12 005 007 009 011 013 131 Width 19 1 3 5 7 9 111 113 Colour black 131 removable easily and without residue, resistant against water, oil and grease adheres to almost all clean and smooth surfaces simple peeling of labels due to slit on back resistant against UV radiation Heat resistant from 30 to + 1 C 128 0 Punching tools / Marking equipment / Pneumatic accessories Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 73

140 Sealing pliers for lead seals, nickelplated design, grips covered with plastic For seal Ø 8 12 140 008 0 012 130 170 220 140 143 Spiral lead seal zinc plated, DIN 137, on 1 kg spools Wire thickness 143 Spool holds approx m 05 / 03 400 143 145 Lead seal DIN 1719, per 1 kg Ø 145 Weight per 0 pieces kg Number per kg Qty 145 8 12 008 0 012 12 23 3 890 430 280 151 Carpenter s pencil oval, from processed wood, painter 151 151 240 12 Punching tools / Marking equipment / Pneumatic accessories 153 Chalk holder for marking chalk, pressure mechanism, black For marking chalk see Item No 155 Colour blue red yellow white 115 155 Marking chalk hexagonal, size 1 x 11, pack = 12 pcs fits chalk holder Item no 153 155 004 153 153 155 155 155 155 004 74 ibemo Kazakhstan 090301 Republic = of UNIT Kazakhstan, FOR PURCHASE West OF ONE Kazakhstan PACKAGING UNIT Oblast, PER ORDER Aksai, NUMBER Pramzone, PLEASE ALWAYS BKKS STATE NUMBER office OF complex ITEMS IN ORDER Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

157 Blackboard chalk rectangular, size 90 x 13, paperwrapped, pack = 12 pcs Colour white 157 157 159 Soapstone chalk rectangular, no wrapping, size x, pack = pcs 159 Colour 159 weiß 13 Metal etcher For fast inscribing on steel, copper, nickel, tin, lead, nonferrous metal alloys and stainless steels; surfaces to be marked must be metallic bright; the handy plastic holder contains two interchangeable refills with intensive acting etching solution; in normal cases the intensive black colour appears iediately and is permanent if necessary can be removed with emery cloth; exposure time is different depending on type of metal, but the marking is visible after a few seconds at the latest 13 13 Complete metal etcher Refills 15 Marker pins Aluminium tube with ball tip, for marking all surfaces, marking width 3 15 Colour white yellow red 19 Felt tip marker permanent marking on all surfaces Marking width 8 8 4 4 15 Colour black red black red 19 004 008 012 15 15 19 19 012 Punching tools / Marking equipment / Pneumatic accessories Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 75

170 Paint marker Felt tip marker with pump, paint pen with alcohol base High UV resistance 170 170 170 004 Marking width Colour 170 4 4 4 white yellow black 004 175 Marking spray Industrial marking paint with high percentage of pigment and extremely short drying time, for compact and very visible marking 175 175 175 175 004 Punching tools / Marking equipment / Pneumatic accessories Colour white neonyellow pink orange Ø 15 20 40 30 0 90 175 004 203 005 007 009 011 ml 0 0 0 0 203 Plastic protective netting highly elastic tube, protects very sensitive surfaces, fits the inserted workpieces optimally, protects corners and edges on shafts and tools, reduces risk of damage, encloses the parts to be protected securely and tightly, does not absorb moister, price per pack! Colour red yellow green red yellow m 2 203 ibemo Kazakhstan 090301 Republic = UNIT of PRICE Kazakhstan, FOR PURCHASE West OF ONE Kazakhstan PACKAGING UNIT Oblast, PER ORDER Aksai, NUMBER Pramzone, PLEASE ALWAYS BKKS STATE NUMBER office complex OF ITEMS IN ORDER 7 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

2 Coolant hoses made of nickelplated steel wound sleeve and an interior plastic hose, exterior damageproof and absolutely leakproof, steel connection and drain nozzle Screwin threaded connector (inches) G 1/4 G 1/4 G 3/8 G 3/8 G 1/2 G 1/2 G 1/2 Nominal length 320 400 400 0 400 0 30 2 032 040 140 1 240 2 23 Bending radius 5 5 80 80 2 252 Shutoff valves for coolant hoses No: 2 Screwininch G 1/4 G 3/8 G 1/2 252 45 45 55 252 2 Coolant modular hose system 1/4 and 1/2 Basic hardware for most applications Includes practical, reusable plastic box Designation 1/4 assortment, 23piece 1/2 assortment, 20piece 2 301 2 401 2 301 401 3 hoses each 280, 2 round nozzles 1, 3 round nozzles 32, 2 round nozzles 5, 1 flat nozzle 24, 1 flat nozzle 24, 7hole 15, 2 Ybranch, 1 double socket, 2 threaded nipple R 1/8, 3 threaded nipples R 1/4, 1 adapter for LocLine, 1 assembly pliers, 1 separating wedge 3 hoses each 25, 3 round nozzles, 1 flat nozzle 30, 1 flat nozzle 0, 1 flat nozzle 30, hole, 33, 1 Ybranch, 1 Y branch reduction, 1 reduction 1/2 to 1/4, 3 threaded nipple R 1/2, 2 threaded nipple R 3/8, 1 adapter for LocLine, 1 assembly pliers, 1 separating wedge Punching tools / Marking equipment / Pneumatic accessories Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 77

2 Coolant modular hose system Maxiflex System 3 (Ø 1/4 ) und 3400 (Ø 1/2 ) You are currently using another system? No problem! You can find the correct adapters at the bottom of the table Practical basic assortments are located on the previous pages Ø 1/4 Ø 1/2 2 2 0 MaxiflexSet: 1 nipple 1 MaxiflexSet: 1 nipple R 1/4, 1 nozzle R 1/2, 1 nozzle Ø 32, 22 joints, Ø, 12 joints, : 320 : 320 015 Pack with 22 joints, 115 Pack with 12 joints, : 280 25 01 Pack with 80 joints, 11 Pack with 48 joints, : 1,000 0 020 Pack with 4 nozzles 117 Pack with 4 jointed pipe Ø 1 segments : 440 022 Pack with 4 nozzles Pack with 4 Nozzles Ø 32 Ø 024 Pack with 4 nozzles 12 Pack with 2 Hole type nozzles Ø 5 30 wide 02 Pack with 2 hole type 128 Pack with 2 Flat nozzles nozzles 24 wide 30 wide 028 Pack with 2 flat nozzles 132 Pack with 4 Angle nozzles 24 wide Ø 7 030 Pack with 4 angle nozzles 134 Pack with 4 Angle nozzles Ø 1 Ø 032 Pack with 4 angle nozzles 13 Pack with 2 multihole Punching tools / Marking equipment / Pneumatic accessories Ø 32 034 Pack with 4 angle nozzles 140 Ø 5 03 Pack with 2 multiple hole 1 angle nozzles, 7 x Ø 2 0 Pack with 4 double sockets, 152 Ball end 052 Pack with 4 double nipples 154 054 Pack with 4 15 threaded nipples R 1/8 05 Pack with 4 158 threaded nipples R 1/4 058 Pack with 2 Ybranches 00 Pack with 2 shutoff valves 070 Separating wedge 170 072 Assembly pliers 172 090 Pack with 4 adapters for LOCLINE and ARIANA CoolLine angular nozzles 8 x Ø 32 Pack with 2 reducers, 1/2 auf 1/4 Pack with 4 double sockets, Ball end Pack with 4 double nipples Pack with 4 threaded nipples R 3/8 Pack with 4 threaded nipples R 1/2 Pack with 2 Ybranches Pack with 2 Ypiece reducers 1/2 to 1/4 Pack with 2 shutoff valves Separating wedge Assembly pliers Pack with 4 adapters for LOCLINE and ARIANA CoolLine 78 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

2 Compressed air pistols Pistol shaped, made of anodised aluminium, activated by lever, operating pressure 2 bar, nozzle bore 15 Size 1 2 3 2 Connection with bushing with bushing 9 with male nipple for couplings 2 3 Compressed air pistol with safety and noise damping nozzle Powerful compressed air pistol made of forged aluminium (surface anodised) for heavy duty work Combined with a safety and noise damping nozzle (noise level only 77 db (A) at bar operating pressure), max operating pressure bar, working pressure 4 bar, operating temp C to C, air consumption 335 l/min (p= bar) Connection 3 with coupling plug 3 3 Safety and noise damping nozzle Made of zinc die casting, chromeplated (nozzle) and aluminium (nipple) Improved work conditions due to significant lowering of the noise level compared to conventional nozzles The blowing force is up to 25 times higher than conventional onehole blowing nozzles 3 0 For compressed air pistols 3 2 and 3 0 4 Extension insert 1, for aimed blowing for hard to get to points, air consumption the same as normal nozzles, fits compressed air pistols No 2 and 3 1 4 5 Compressed air pistols for compressed air cleaning, attractive, ergonomic design, compressed air volume is dosed easily with the outlet low noise level, internal threads R 1/4 8 straight tube 8 bent tube bent tube 8 x 300 straight tube 8 x 0 straight tube 5 005 012 015 4 5 5 5 015 Punching tools / Marking equipment / Pneumatic accessories Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 79

7 Pressure washing gun universal safety and high pressure washing gun in higher quality and performance class For flexible applications, for connection to water or emulsion pumps for drilling fluid Housing made of anodised aluminium Lever, hand wheel, nozzles and bushings of brass Shackle of nickelplated steel Handle case ultramid Nozzle 2 diameter Operating pressure max 40 bar, Operating temperature 0 to 90 C Connection Hose bushing 1/2 7 7 8 Hand tyre pressure gauge calibrated, fill, release pressure and check with one grip of the handle, highquality, concentric manometer 80 diameter, scale divisions in bar and psi Manometer largely protected against impact by selfcontained plastic protective cap, the manometer is secured against over pressure and can be loaded to the end value of the respective display range Professional design 8 Measurement range bar Measurement range psi Plug 8 0 0 140 140 lever plug twosided 4 292 Spray guns for compressed air with Hostalen plastic canister, matte transparent, compressed air connection G 1/4 with screwon hose connection for hose with 5 inside diameter, operating pressure 3 4 bar, the spray stream can be set on the nozzle as required 4 292 capacity Liter 4 292 07 07 with straight spray tube with swiveling nozzle with swiveling nozzle 4 292 Punching tools / Marking equipment / Pneumatic accessories 4 29 Sand blasting guns for compressed air for removing rusty spots, which are impossible or difficult to reach with grinding wheels and other tools, connection with nipple for selfshutoff hose coupling, with hardened nozzle, blast furnace slag can be used as blast medium, when using quartz sand (grain size 7) for coercial use the regulation on dangerous working material from Sept 17, 1971, Appendix II Paragraph 3 is to be followed capacity kg 1 2 29 Operating pressure bar Nozzle Ø Working distance 4 4 300 Replacement nozzle, hardened, 4 Ø 4 29 80 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

Quick couplings made of steel, zinc plated and passivated, springs of stainless steel, seals of nitrile rubber, applications with rough handling, drops from elevated heights, driving over with vehicles, etc 532 Quick coupling with external threads Thread inch / G 1/4 / 3 G 3/8 / G 1/2 / 125 532 005 008 with external threads 532 535 Quick coupling with internal threads Thread inch / 535 G 1/4 / 3 G 3/8 / G 1/2 / 125 005 008 with internal threads 535 538 Quick coupling with hose nipple Ø inch / 538 538 1/4 / 3 3/8 / 1/2 / 125 005 008 with hose nipple 540 Connection nipple with external threads Thread inch / G 1/4 / 3 G 3/8 / G 1/2 / 125 540 005 008 with external threads 540 543 Connection nipple with internal threads Thread inch / G 1/4 / 3 G 3/8 / G 1/2 / 125 548 Pushon bushings Designation twoway twoway threeway threeway Diameter inch / 1/4 / 3 3/8 / 1/2 / 125 552 Distributors made of brass, with internal threads 554 Distributors made of brass, singlehanded couplings Thread G 3/8 1/2 3/8 1/2 552 004 543 005 008 548 005 008 554 1 2 3 4 543 with internal threads 548 552 552 554 1 554 3 Punching tools / Marking equipment / Pneumatic accessories Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 81

Punching tools / Marking equipment / Pneumatic accessories Compressed air accessories brass, MS 58, coupling locking on one side, NW 7 Designation Coupling Coupling Coupling with hose connection Pushon bushing Hose nipple Hose nipple Hexagon union nut Hose bushing G 1/4 Hose bushing G 3/8 Hose bushing G 1/2 Threaded bushing G 1/8 Threaded bushing G 1/4 Threaded bushing G 3/8 Threaded bushing G 1/2 Double nipple with taper Reducing nipple Socket Screw plug with hexagon socket External / internal threads ET ET ET IT IT IT ET ET ET ET IT IT IT IT ET ET OT OT ET AG ET OT OT OT OT ET ET ET ET ET ET ET IT/ET IT/ET IT/ET IT/ET IT/ET IT IT IT IT IT OT OT ET ET ET Connection G 1/4 G 3/8 G 1/2 G 1/4 G 3/8 G 1/2 9 13 9 13 G 1/8 G 1/4 G 3/8 G 1/2 G 1/8 G 1/4 G 3/8 G 1/2 G 1/4 G 3/8 G 1/2 9 9 9 13 9 9 9 13 9 13 G 1/8 x 1/8 G 1/8 x 1/4 G 1/4 x 1/4 G 1/4 x 3/8 G 3/8 x 3/8 G 3/8 x 1/2 G 1/2 x 1/2 G 1/2 x 3/4 G 3/4 x 3/4 G 1/8 x 1/4 G 1/4 x 3/8 G 3/8 x 1/2 G 1/2 x 3/4 G 3/4 x 1 G 1/8 G 1/4 G 3/8 G 1/2 G 3/4 G 1/8 G 1/4 G 3/8 G 1/2 G 3/4 005 00 007 009 011 012 013 014 015 01 017 018 019 022 023 024 025 028 029 031 038 039 044 047 048 049 052 053 05 057 01 02 03 0 07 072 073 074 075 07 077 078 079 081 088 089 091 092 093 097 098 099 1 2 121 122 123 124 125 Coupling Coupling 005 007 Coupling with hose connection 009 012 Pushon bushing 013 015 Hose nipple 01 019 Hose nipple 022 025 Hexagonal union nut 028 031 Hose bushing 038 049 Threaded busing 052 07 Double nipple with taper 072 081 Reducing nipple 088 093 Socket 097 2 Screw plug with hexagon socket 121 125 82 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

55 Sealing tape for all thread systems, for gas, water, steam, heat, prevents rusting, guaranteed reliable sealing, resistant to aggressive chemicals, comes on a 12 m roll Tape width 12 55 Tape thickness 01 55 5 Compressed air hose drum operating pressure 17 bar, axial connection enabled rolling/unrolling during operation, complete with singlehanded quick connections, connection hose and wall bracket Hose length m 5 Hose Ø 20 20 9/15 /12 5 58 Spiral hoses nylon, completely outfitted with connection coupling and plugin sleeve with kink protection spring Working length m 58 Hose 58 25 5 75 x 8 x 8 x 8 572 Compressed air hoses PVC hose with perlon fabric insert Hose size x 3 9 x 3 13 x 35 572 051 052 053 Liquid test pressure at 20 C bar 25 22 19 Roll m 572 Punching tools / Marking equipment / Pneumatic accessories = ibemo UNIT PRICE Kazakhstan FOR PURCHASE 090301 OF ONE PACKAGING Republic UNIT of PER Kazakhstan, ORDER NUMBER West PLEASE Kazakhstan ALWAYS STATE NUMBER Oblast, OF ITEMS Aksai, IN ORDER Pramzone, BKKS office complex Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 83

573 Air hoses for compressed air containing lubrication as well as industrial water for mediumheavy applications Standard: DIN 28, Operating pressure: bar air/ 1 bar water Burst pressure: 54 bar, Temperature range: from 30 C to + C Inner core: black, smooth, Outer covering: black, smooth, aging and weather resistant Inner Ø 573 Wall thickness Outer Ø Roll 573 m 13 19 25 5 7 23 31 39 40 40 40 574 Garden hoses black / green transparent, long servicelife and flexible, cadmiumfree, burst pressure 20 bar Ø inch 574 Roll m 1/2 1/2 1/2 3/4 1 007 0 20 30 574 575 Hose clamps special steel, with chamfered band edges, bright galvanised, large clamping area, can be placed on without difficulty and without lost time in closed condition Clamping range 575 Clamp width Punching tools / Marking equipment / Pneumatic accessories 8 12 1 12 20 1 25 20 32 25 40 32 40 0 70 0 80 70 90 80 90 1 1 130 140 130 1 1 170 170 190 190 2 2 230 220 240 230 2 012 01 020 025 032 040 0 00 070 080 090 1 130 140 1 170 190 2 230 240 2 577 Hose clamp malleable cast iron, twopart with jaws for SLW 1/2 = 13 3/4 = 19 1 = 25 577 9 9 9 9 9 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 25 25 25 25 5 5 1 1 1 1 1 Hose OD / clamping range 22 29 28 34 32 40 575 577 84 ibemo Kazakhstan 090301 Republic = UNIT of PRICE Kazakhstan, FOR PURCHASE West OF ONE Kazakhstan PACKAGING UNIT Oblast, PER ORDER Aksai, NUMBER Pramzone, PLEASE ALWAYS BKKS STATE NUMBER office OF complex ITEMS IN ORDER Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

578 Jaw couplings malleable cast iron, with bushing For hose diameter 13 19 25 578 579 Jaw couplings malleable cast iron, with internal threads and hexagonal 578 Internal thread inch 579 Hexagon G 1/2 G 3/4 G 1 27 32 41 579,580 Jaw couplings malleable cast iron, with external threads and hexagonal External threads inch 580 Hexagon G 1/2 G 3/4 G 1 1 2 3 27 32 41 580 582 Tap cock selfsealing, malleable cast iron with brass taps and ventilation with screwedon coupling Connection thread inch G 1/2 G 3/4 G 1 582 1 2 3 582 583 Rubber seal for jaw coupling Item no 578 582 Colour black For hose inch 3/8 1/2 3/4 1 583 584 Garden hose jaw couplings brass, for water G 3/8 G 1/2 G 3/4 G 1 584 005 007 58 Garden hose jaw couplings brass, for water, with internal thread Internal thread inch 58 1 3 5 7 583 584 58 Punching tools / Marking equipment / Pneumatic accessories Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 85

587 Garden hose jaw couplings brass, for water, with external thread External thread inch G 3/8 G 1/2 G 3/4 G 1 587 005 007 587 588 Rubber seal for jaw coupling No 584 587 Colour 588 black 588 589 Spray nozzle hotpressed brass, Siro shape, fixed hose bushing, swivel nozzle head, lockable and infinitely variable 589 Hose size inch 1/2 3/4 589 590 Water hose drum special hose 1/2 with cloth insert and spirally wrapped cross pattern, highly elastic and heavyduty, with hose quick coupling, water stop and adjustable plastic spray nozzle Hose length 590 Punching tools / Marking equipment / Pneumatic accessories Internal thread inch 3/8 1/2 1 20 594 594 Filter standard series with plastic container, housing of zinc die casting External thread inch 1/4 595 154 19 213 595 Drain valve automatic, black, plastic coated, the separated condensation lifts the floater and triggers the automatic draining Total width 5 87 90 Flow volume at bar m 5 280 380 Ø 42 590 594 595 8 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

59 Pressure regulator standard series, relieving, brass housing 59 3 59 3 59 3 Internal thread 59 Overall length Total width Manometer diameter Control range Flow volume inch bar m 3/8 1/2 1 1 2 3 130 170 18 54 82 90 3 3 05 05 05 5 1 320 597 Oil mist lubricator standard series with plastic container, zinc die casting housing Internal thread inch 597 Total width Flow volume at bar m 3/8 1/2 1 170 211 229 5 87 90 75 20 440 597 598 Pressure regulator with filter standard series, relieving, zinc die casting housing, polycarbonate container, container volume 25 cm 3, Nr 598 capacity 80 cm 3 Internal thread inch 598 Overall length Total width Manometer Ø Control range bar Flow volume bar m 1/4 3/8 1/2 220 220 30 5 5 87 3 05 05 05 55 0 175 598 599 Service units standard series, threepart, consisting of filter, pressure regulator and oil mist lubricator Internal thread inch 1/4 3/8 1/2 599 Overall length 18 18 227 Total width 19 19 281 Manometer Ø Compressed air conditioning Variobloc easy handling high capacity long service life manufactured acc to EN 93 Request the detailed documents 40 40 3 Control range bar 05 05 05 Flow volume m 30 35 599! Punching tools / Marking equipment / Pneumatic accessories Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 87

VOC conforming spraying systems In addition to a drastic reduction of solvent discharge, the VOC guidelines for solvent legislation, valid since August 24, 2, also require application equipment with a transfer rate > 5 % For new operations this most iediately be implemented; for existing operations the transition period is until 7 at the latest 701 Universal paint gun SATA LM 0 B RP reliable paint gun in RP technology for processing of primers and paint systems of all types The fine atomisation ensures economical and highly efficient work with high transfer rate Gun with 0 l plastic container and 13 nozzle A wide spectrum of nozzles of flexible applications are available as accessories (see 715) Inlet pressure bar 701 Air consumption Nl/min Spraying distance cm 30 0 20 18 23 701 0 712 Paint gun : SATAjet GR Universal gun for robust applications with high capacity, overspray free working even with high viscosity media, thanks to wide horn technology clogging of the air nozzles is reliably prevented Gun with 0 l plastic container and nozzle 15 W Inlet pressure bar 712 Air consumption Nl/min Spraying distance cm 35 330 18 23 712 715 Accessories for SATA paint gun Designation Fits paint gun no 715 Punching tools / Marking equipment / Pneumatic accessories SATA cleaning set SATA paint screen Micrometer with manometer Flow container Flow container Paint air hose for efficient cleaning of the paint gun increases paint quality by avoiding particle inclusions for exact spray pressure adjustment directly on the paint spray gun plastic with a filling capacity of 0l with measurement scale and drip catcher, external threads M 1 x 15 Internal thread M 1 x 15 High quality, antistatic air hose acc to DIN 8541, prevents sparking and fires from electrostatic charging, diameter 9, m long, completely assembled with nipple and quick coupling, ensures high paint quality 715 005 701 701 005 701 0 712 715 007 005 007 008 012 715 008 715 715 715 012 88 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

715 Nozzle sets for SATA paint guns Nozzle sets 08 13 1 18 20 25 30 13 W 15 W 17 W 20 W 25 W 30 W 715 08 070 073 07 078 080 085 090 3 5 7 125 130 suitable for 701 0 712 715 720 Paint spray gun Minipaint : Compact and handy small paint gun in reduced spray and environmentally friendly HVLP design with high part transfer rate ( 80%) with simultaneous low operating pressure (20 25 bar) Equipped with stainless steel nozzle components for processing waterbased paints Especially suitable for smaller surfaces, partial painting of vehicles, as well as a variety of decorative painting Quality and precision in detail, paired with optimum ergonomics as a guarantee for perfect results Advantages of the HVLP system: excellent surface finish versatile application possibilities in vehicle, metal and wood work, as well as in industry conforming to legal requirements (VOC) low paint consumption low emissions high efficiency Technical data: Working pressure: 2 25 bar / 28 358 psi Max material temperature: 40? Air consumption at 2 bar: 90 l/min Weight: 570 g 720 Designation Paint gun with nozzle Ø 07 in plastic case : Paint gun, flow cup (plastic), replacement part kit, key, cleaning set, G 1/4 steel coupling nipple, lubrication oil 720 Spare parts for paint spray gun Minipaint Designation Nozzle set consisting of: spray head, paint nozzle, paint needle Nozzle set consisting of: spray head, paint nozzle, paint needle Nozzle set consisting of: spray head, paint nozzle, paint needle Air micrometer 2 bar Sealing set Flow cup with cover Flow cup with cover 720 720 011 013 015 021 1 3 5 Connection G 1/4 external threads 1 to 5 ccm Ø 07 Ø Ø 12 75 2 021 Punching tools / Marking equipment / Pneumatic accessories Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 89

7 012 Wooden German jack plane with hornbeam sole, integrated frog and ready to use plane iron (blade) 7 012 Iron width 7 012 48 240 7 01 Smoothing plane with hornbeam sole, integrated frog and ready to use plane iron (blade) Iron width 7 01 7 01 48 220 7 020 Double rabbet plane made of hornbeam, with ready to use plane iron Iron width 30 7 020 270 7 020 7 022 Joiner s haer DIN 59, with ash shaft, painted black, ground striking face and pein Face height 7 022 Weight g 7 022 20 22 28 020 022 028 190 230 4 7 02 Joiner s mallet made of heavy beechwood, shaft profiled for good, comfortable grip, glued and wedged in, fine varnish finish Woodworking and building hardware Mallet head 5 x 5 140 x 80 7 02 0 020 7 02 90 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

7 040 Paring chisel Cutting edge finely ground and ready for use, can be resharpened, Blade length 140, with hornbeam handle Width 4 8 12 14 1 18 20 22 24 2 30 7 040 004 00 008 0 012 014 01 018 020 022 024 02 030 7 040 7 042 Gouge Cutting edge finely ground and ready for use, can be resharpened, Blade length 140, with hornbeam handle 7 042 Width 12 1 18 25 7 042 00 0 012 01 018 025 7 051 Hand drill stable design closed housing, with 2 speeds additional handle can be used on left or righthand side 7 051 Capacity 7 051 355 7 053 Hand brace with four jaw chuck, with ring ratchet and ball bearing palm stock, completely zinc plated 380 7 053 Operating diameter 20 7 053 Woodworking and building hardware Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 91

7 00 Machine auger bits with cylinder shank, 3 clamping faces and threaded spur tip, one entering tap and one main cutting edge 7 00 Drill bit Ø 8 12 14 1 20 24 12 14 1 18 20 24 30 235 235 235 235 235 235 235 235 4 4 4 4 4 4 4 4 Working length 30 30 30 30 30 30 30 30 Shank Ø 8 12 12 12 12 12 12 12 12 12 12 12 12 7 00 00 008 0 012 014 01 020 024 1 112 114 11 118 124 130 7 04 Machine wood twist drill bits DIN 7487 E, cylindrical throughout, with centring tip, 2 main cutting edges and protruding cutting edges Drill bit Ø 4 5 8 12 14 1 18 20 7 04 004 005 00 008 0 012 014 01 018 020 7 05 Wood twist drill bit sets CV steel in box 75 85 95 115 130 1 180 190 205 7 04 Qty Contains Ø 7 05 5 8 4 / 5 / / 8 / 3 / 4 / 5 / / 7 / 8 / 9 / 005 7 05 Woodworking and building hardware 7 07 Wood drill bit with hexagon connection end Connection end: 1/4 hexagonal shank Truerunning precision For use in all cordless screwdrivers and drills with hexagonal toolholder Drill bit (tip and spiral) cut from one solid piece HSS steel Precision ground cutting edges Precise, stripfree drilled holes in softwood and hardwood Set: Ø 2 3 4 5 8 7 07 004 005 00 008 0 Number of drill bits 7 07 Qty 5 5 For wood drill bits with hexagon connection end, please see 515 2 74 88 99 1 133 Ø 2 3 4 5 7 07 7 07 5 92 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

7 070 Machine Forstner bits Standard type, with centring tip, two main cutting edges and peripheral cutting edge Drill bit Ø 12 14 15 1 18 20 22 24 25 2 28 30 35 40 45 7 070 0 012 014 015 01 018 020 022 024 025 02 028 030 035 040 045 0 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 Shank 8 x 30 8 x 30 8 x 30 8 x 30 8 x 30 8 x 30 8 x 30 8 x 30 8 x 30 8 x 30 8 x 30 8 x 30 8 x 30 x 30 x 30 x 30 x 30 7 070 7 071 Machine Forstner bit set in wooden box, 5 piece Contains Ø 7 071 15 / 20 / 25 / 30 / 35 7 071 7 07 Countersink bit with cylindrical shank, 7 cutting edges, 90 7 07 Ø 7 07 Shank 13 1 20 013 01 020 8 x 30 8 x 30 8 x 30 7 084 Scratch awl Special vanadium steel blade, bright nickel plated, handle made of shockproof plastic 7 085 Square reamer Special vanadium steel blade, bright nickel plated, handle made of shockproof plastic 7 084 7 085 Blade x Overall length 185 7 084 7 085 Woodworking and building hardware Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 93

7 092 Cabinet scraper Rectangle, made of steel Size 7 092 7 092 1 x 0 x 08 7 093 Glass cutter with nickel plated top and wooden handle, turret with wheel patterns made of stainless steel 7 093 For glass thickness 3 4 130 Replacement cutting wheels (per doz) 7 093 7 094 Sintered carbide glass cutter with nickel plated top, flat, unbreakable plastic handle, Sintered carbide cutter wheels ground and lap polished 7 094 For glass thickness 2 12 135 Replacement Sintered carbide cutter wheels (each) 7 094 7 09 Diamond glass cutter high gloss nickel plated, large head with two notches and clamp, oval wooden handle, with bevelled and ground diamond for slightly dragging cut 7 09 005 for glass thickness 7 09 3 5 005 130 7 099 Scratch gauge made of hornbeam, two individually adjustable rails with integrated scales 0 1, slender scriber made of steel Woodworking and building hardware Scale length 1 7 099 7 099 94 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

7 Frankfurter shovel RuhrBrillant Frankfurter shovel, size 5, specially hardened, red powder coated, without handle Size 5 7 Blade size 300 x 270 7 7 2 Holsteiner shovel RuhrBrillant Holsteiner shovel, size 2, 3/4 high, specially hardened, red powder coated, without handle Size 2 7 2 Blade size 270 x 2 7 2 7 4 Dutch shovel RuhrBrillant Dutch shovel, size 2, 3/4 high, specially hardened, red powder coated, without handle Size 2 7 4 Blade size 300 x 2 7 4 7 Ried shovel Ideal ried shovel, size 7, silver powder coated, without handle Size 7 7 Blade size 370 x 3 7 7 8 Construction spades Ideal construction spades, made from one piece of taper rolled special steel, size 2, oil tempered and hardened, sand blasted, ash T handle 85 cm Size 7 8 2 7 112 Shovel handle 1300 7 112 Blade size 285 x 185 / 180 7 8 7 112 Woodworking and building hardware Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 95

7 Contractors bucket Plastic, black litre 12 7 7 7 125 Water bucket made of strong sheet steel, hotdip galvanised litre 7 125 11 7 125 7 205 Bricklayers trowels with straight neck and : Normal type 1 and 2: stainless type Blade length 7 205 180 180 1 2 normal normal stainless steel stainless steel 7 205 7 209 Berner plastering trowels with straight neck Blade length 140 7 209 7 209 7 211 Gauging trowels with S neck Blade length 7 211 140 7 217 Hamburger jointer trowels stainless type 7 211 Woodworking and building hardware 280 x 130 280 x 130 Blade size 170 x 8 170 x 170 x 12 170 x 14 7 219 Smoothing trowels with curved, painted handle, : stainless type Blade size 7 219 7 217 2 3 4 5 Blade thickness 07 07 normal stainless steel 7 217 7 219 9 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

7 28 Float made of plastic 280 7 28 Width 140 7 28 7 284 Plasterers knife with straight neck Blade length 7 284 Blade width 90 93 98 1 005 40 0 80 stainless steel stainless steel stainless steel stainless steel 7 284 7 304 Adhesive and grout spreader, serrated edge with wide handle and hang hole Width 180 Square teething 7 304 7 304 x 00 8 x 8 008 7 308 Painters filling knife with oval wooden handle, forged blade, hardened and finely ground, hang hole 7 308 Blade width 20 30 40 0 80 7 308 004 005 00 008 0 7 312 Japanese scraper set mediumhard type, with acid resistant PVC handles Quantity 7 312 Blade widths 4 7 31 Plaster mixing cup made of soft PVC, black, tapered, bulbed shape 80 7 312 Ø 130 7 31 7 322 Knee pads per pair, shell shape made of soft foam with rubber straps Replacement rubber straps 7 322 /pair Height 95 7 31 7 322 Woodworking and building hardware Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 97

7 844 Paper towels blue, for easy wiping and for the hands, more hygienic than coloured cleaning cloths, more effective than cleaning wool, absorbent, strong, low lint content Large roll, perforated, with 0 towels, 2 ply Large roll, perforated, with 0 towels, 2 ply Large roll, perforated, with 0 towels, 3 ply 7 844 005 Size 22 x 38 3 x 3 3 x 3 7 844 7 845 Paper towels, 4 ply white, for removing oil and grease, especially in corners and along edges, the economic and efficient alternative to jersey fabrics and coloured cleaning cloths, hardwearing and tear resistant, solvent resistant 7 845 Size Large roll, perforated, with 700 towels, 4 ply 30 x 38 7 845 7 84 Wall mounted holder for paper towels for holding large rolls, with tear off device for perforated paper towels Supplied without paper towels 7 84 Width cm 7 84 chrome plated bis 40 7 847 Floor stand mobile, stable and strong, for holding large rolls, with tear off device for perforated paper towels and holder for waste sack Supplied without paper towels and waste sacks Woodworking and building hardware Tubular steel, painted 7 847 Roll width up to cm 40 7 847 98 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

7 881 First aid case Made of stable ABS plastic Dimensionally stable, impact proof, temperature resistant, splash proof, dusttight Wallmounting bracket with 90 stop locking device Striking orange colour Adjustable inner dividers Smooth running turnlock fasteners Strengthened handle Can be sealed Handy handle buttons for easy removal of the case Transparent cover panels? Allround rubber seal First aid coloured pictograms 005 to 007: Jobrelated pictogram and labelling Including additional equipment depending on occupational group 7 881 + 7 881 005 007 009 Filled according to 7 881 Size Usage DIN 13 157 DIN 13 19 DIN 13 157 DIN 13 157 DIN 13 157 005 007 009 20 x 170 x 1 400 x 300 x 1 400 x 300 x 1 400 x 300 x 1 400 x 300 x 1 Standard Standard Workshop, repair and maintenance companies Metalworking for the whole mechanical engineering industry 7 884 First aid cabinet Cabinet basic shell made of 075 thick sheet steel, frame made from one piece, rounded corners and edges, with hanging device, security lock with two keys, two doors, two shelves, heightadjustable, doors with three filing holders each Filled to DIN 13 19 7 884 Size 404 x 42 x 170 7 884 Woodworking and building hardware Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 99

7 882 First aid box, aluminium Cabinet basic shell made of 2 anodised aluminium Rounded corners and edges with hanging device Security lock with two keys One door Two heightadjustable shelves Dust tight, maintenance free, splash proof Top quality made of 2 anodised aluminium Filled to 7 882 Size DIN 13157 DIN 1319 030 040 300 x 370 x 400 x 4 x 7 882 7 885 Fills Refill packs for first aid boxes fulfil all requirements of the UVV49, BGV A1 and GUV03 Filled to 7 885 Qty DIN 1319 DIN 13157 141 72 7 885 7 891 Plaster dispensers Dispenser: Made of highstrength ABS plastic Including wall bracket and fixing materials Striking orange colour With three compartments, transparent cover with tunnel compartment Plasters: aluderm aluplast wound plasters with aluminium vacuum coated wound dressing and absorbent nonwoven with BACTEKILLER breathable, absorbent, promotes skin formation and healing also suitable for people with sensitive skin individually hygienically sealed Contains 90 plasters in 4 sizes 25 strips 72 x 25 25 strips 72 x 19 25 fingertip dressing 15 finger dressings x 20 7 891 090 Size x 122 x 57 7 891 090 Woodworking and building hardware 7 895 Plaster dispensers When pulled out of the dispenser one half of the plaster is ready to stick and must be used iediately Replace and remove with special key only Plaster dispenser filled, 190 x 40 x 1, with special key, basic fitout with 1 refill each 7 895 and 7 895 004 Refill packs: Refill plaster strips elastic, 24 plasters 72 x 18 cm + 1 plasters 72 x 25 cm Refill plaster strips waterproof, 27 plasters 72 x 19 cm + 18 plasters 72 x 25 cm 7 895 004 004 1 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

8 NTS hand riveter with opening spring, working range: up to 5 Ø aluminium and 4 Ø stainless steel, Features: nozzle /24 in working position, /18, /27, /32 on the riveter housing, 1 nozzle spanner, maintenance instructions with spare parts list Tool stroke 8 Weight g with 4 nozzles 8 480 275 8 8 Nietboy hand riveter kit in practical case, with extensive accessories Set consisting of 1 NTS hand riveter, 1 twist drill, blind rivets 4 Ø short, medium, long, washers, riveting guide 8 0 8 005 NTX hand riveter Working range up to 5 Ø aluminium and 4 Ø stainless steel, Features: nozzle /24 in working position, /18, /32 on the riveter housing, 1 nozzle spanner, maintenance instructions with spare parts list 8 0 Tool stroke 8 005 Weight g 8 575 20 8 005 8 005 Senior Nietbox hand riveter kit Weight approx 375 kg, dimensions 340 x 205 x 40, in stable metal case, with extensive accessories Set consisting of 1 NTX hand riveter, 12 blind rivet sizes, 3 + 4 Ø, made of different materials, 1 nozzle spanner 8 005 0 8 007 Flipper hand riveter Working range up to 5 Ø aluminium and 4 Ø stainless steel, Features: nozzles /24 in working position, /18, /29 on the rivet collector, 1 nozzle spanner on the rivet collector, maintenance instructions with spare parts list 8 005 0 Total stroke 8 007 Individual stroke Weight g 12 18 7 212 8 007 8 011 HN 2 long arm lever riveter Working range from 30 to 4 Ø all materials, Features: Nozzle 1/32 in working position, 1/29, 1/3, 1/40, 1/45 in the handles, mandrel collector in working position, maintenance instructions with spare parts list Tool stroke 8 011 Weight kg 185 with 5 nozzles 570 8 011 Riveters / Plugs Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 11

8 014 SN 2 lazy tong riveter Working range from 30 to 4 Ø all materials, features: Nozzle 1/32 in working position, 1/29, 1/3, 1/45 enclosed, 1 nozzle spanner, maintenance instructions with spare parts list Tool stroke 8 014 closed opened Weight 11 294 832 kg 21 8 014 8 014 Replacement gripping jaws 3 pce, for 8 011 (HN2) and 8 014 (SN2) 8 014 0 8 014 0 8 018 Battery operated blind rivet tools electromechanical all tools are cordless and operated with 12 V output voltage Incl quick charger and sheet steel case AccuBird 8 018 : Working range: Blind rivets up to 5 Ø all materials BULBTITE blind rivets 4; 52 and 3 Ø aluminium and steel Nozzles: 17/24 in working position, 17/27, 17/29, 17/32 in the rivet magazine 17 Ah PowerBird 8 018 : Working range: Blind rivets from Ø 48 steel up to 4 all materials BULBTITE blind rivets up to Ø 77, all materials MEGA GRIP blind rivets up to Ø 4, all materials Nozzles: 17/32 in working position, 17/3, 17/40, 17/45 in the rivet magazine, spanner: SW 12 (cover of the magazine), quick charger: 230 V/ Hz, rechargeable power battery: 12 V; 20 Ah FireBird 8 018 005: Working range up to M aluminium, up to M 8 steel and up to M stainless steel Threaded mandrel and nozzle M in working position, 1 Allen key, threaded mandrel and nozzle M 4 and M 5 in the magazine 17 Ah Accu Bird 8 018 Blind rivet Ø Material Rivets/Battery charge Nozzle Riveters / Plugs 8 018 AccuBird 8 018 011 Spare rechargeable battery for AccuBird 24 Aluminium 1900 30 and 32 Aluminium 1300 30 and 32 Steel 1 30 and 32 Stainless steel 0 40 Aluminium 0 40 Steel 900 40 Stainless steel 800 48 and Aluminium 700 48 and Steel 0 48 and Stainless steel 400 8 018 PowerBird 8 018 013 Spare rechargeable battery for PowerBird 48 and Steel 0 48 and Stainless steel 400 0 Aluminium 400 0 Steel 220 4 Aluminium/PG aluminium 300 4 Steel 180 8 018 005 FireBird 8 018 015 Spare rechargeable battery for FireBird M 3 Aluminium 00 M 3 Steel/Stainless steel 5 M 4 Aluminium 520 M 4 Steel/Stainless steel 480 M 5 Aluminium 480 M 5 Steel/Stainless steel 400 M Aluminium 400 M Steel/Stainless steel 300 M 8 Aluminium 340 M 8 Steel 180 M Aluminium 300 17/18 17/24 17/24 17/24 17/24 17/27 17/29 17/29 17/32 17/3 17/32 17/3 17/3 17/40 17/45 17/45 Power Bird Fire Bird 8 018 8 018 005 12 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

8 023 Blind riveter, pneumatichydraulic Gripping mechanism, with positively driven jaws and pneumatic pressing Very long tool life Secure, nonslip grip of the mandrels High setting forces and low weight Faster work cycle Optimised stroke for each tool Low air consumption due to double use of the air for setting and extracting Low vibration and sound insulated Low actuation force With 4 (), or 3 () nozzles Tool stroke 8 023 Weight kg Setting force at 5 bar Working range 18 25 1 19 9000 N 14000 N up to 5 Ø all materials, Ø Aluminium/steel up to 4 Ø all materials 8 023 8 040 Aluminium blind rivet with zinc plated steel shaft and flat round head Supplied in packs only Shank Ø 8 040 Rivet length Grip length zinc plated 8 040 3 3 3 3 3 3 3 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 004 00 008 0 012 01 018 8 1 112 11 118 20 208 2 212 214 21 218 225 221 4 8 12 1 18 8 12 1 18 8 12 14 1 18 25 21 05 15 25 35 35 5 5 8 7 125 125 155 15 35 35 5 75 5 8 125 11 15 05 35 2 5 35 7 5 95 7 115 85 13 5 15 17 21 17 21 0 0 0 0 0 0 2 0 0 0 0 0 0 0 0 0 0 0 0 0 2 2 8 044 Aluminium blind rivet with stainless steel shaft and flat round head Supplied in packs only 8 044 Shank Ø 8 044 Rivet length Grip length Stainless steel 3 3 3 3 4 4 4 4 4 00 008 0 012 8 1 112 11 8 12 8 12 1 25 35 35 5 5 8 7 15 35 35 5 75 5 8 125 0 0 0 0 0 0 0 0 0 Riveters / Plugs = ibemo UNIT FOR Kazakhstan PURCHASE OF ONE 090301 PACKAGING Republic UNIT PER of ORDER Kazakhstan, NUMBER PLEASE West ALWAYS Kazakhstan STATE NUMBER Oblast, OF ITEMS IN Aksai, ORDER Pramzone, BKKS office complex Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 13

8 048 Stainless steel blind rivet with stainless steel shaft A 2 (14541) and flat round head Supplied in packs only Shank Ø 3 3 3 3 4 4 4 4 5 5 8 048 00 008 0 012 8 1 112 208 2 Rivet length 8 12 8 12 8 Grip length 1 3 3 5 5 7 7 9 15 25 25 45 45 5 5 85 15 4 4 0 0 0 0 0 0 0 0 0 0 Stainless steel 8 048 8 034 PunchBird electric metal hole punch for fast hole punching in sheet metals electromechanical 12 V cordless with high power output new type of gripper system for the tension bolts no changing of tension bolts on the punching tool large number of punches per battery charge low tool weight Ø 22 : max 20 sheet steel or 15 sheet stainless steel Ø 35 : max 15 sheet steel or sheet stainless steel Technical data: Driving power: 13 kn Weight: 24 kg with rechargeable battery Working time: approx 18 sec per punch Punches per battery charge: approx 2 Scope of supply: Quick change rechargeable power battery 12 V/20 Ah (NiCd), 1 quick charger, in case Hole punches not included in the scope of supply Driving power kn 8 034 Weight kg 13 24 8 035 Hole punches for PunchBird hole punch Ø 8 035 152 015 01 18 018 204 020 225 022 283 028 320 032 3 035 8 035 8 305 S plugs suitable for all concrete and masonry materials, for fixing objects to be fixed with wood or particle board screws, resistant against weathering and ageing, rust, rotting and temperatures from 40 to +80 C Supplied in packs only 8 305 / Drill bit Ø Drill hole depth Riveters / Plugs S4 S5 S S8 S S12 S14 S1 004 005 00 008 0 012 014 01 4 5 8 12 14 1 25 35 40 55 70 80 95 25 20 8 305 ibemo Kazakhstan 090301 Republic = of UNIT Kazakhstan, FOR PURCHASE West OF ONE Kazakhstan PACKAGING UNIT Oblast, PER ORDER Aksai, NUMBER Pramzone, PLEASE ALWAYS BKKS STATE NUMBER office complex OF ITEMS IN ORDER 14 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

9 012 Freezer Spray for locating faults in case of thermal interruptions, cools fast, avoids heat damage during soldering, temperature range up to 45 C cooling ml 400 9 012 040 Aerosol can 9 012 040 9 015 Compressed air spray blows away loose dust from inaccessible places such as keyboards, printers, etc ml 9 015 400 040 Aerosol can 9 015 040 9 028 Stainless steel spray fast drying, abrasion resistant, shortterm heat resistant up to + 300 C, for making good damaged stainless steel parts, effective surface treatment, this stainless steel spray reliably adheres to all metal parts, most plastics, glass, wood, stone, cardboard, Use: The surface to be sprayed must be clean and free of grease and rust, shake can thoroughly for approx 2 minutes before use, use temperature 18 25 C, if several coats applied, allow 5 minutes drying time for each before spraying next coat ml 400 9 028 040 Aerosol can 9 028 040 9 030 Zinc spray, special resistant against salt, rust and water, fastdrying, can be painted over, temperature resistant up to + 0 C, high corrosion resistance, particularly suitable as a primer as well as final protective coat after welding, cutting, drilling and grinding ml 400 9 030 040 Aerosol can 9 030 040 Chemical products Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 15

9 031 Zinc spray, light, bright Adheres to metals and provides longterm protection against corrosion Uses: for all vehicle body work for making good damaged hotdip galvanizing as intermediate coat in spot welding Technical characteristics: Colour: silver grey, bright and shiny like fresh hotdip galvanising Temperature resistance: up to +0 C Forms a smooth and porefree film, quickdrying, can be spot welded, electrically conductive 9 031 040 ml 9 031 400 040 Aerosol can 9 032 Aluminium spray highquality longterm protection, protects against rust and corrosion, heat resistant up to +800 C, this highquality aluminium spray provides maximum corrosion protection for all metallic surfaces, resistant against temperature and weathering effects, diverse versatile uses, very good abrasion resistance, Uses: Vehicle rims, exhaust systems, furnaces, air conditioning and ventilation systems, pipes, turbines, vessels, truck bodies, etc ml 400 9 032 040 Aerosol can 9 032 040 9 034 Zinc aluminium spray Maximum corrosion protection for all metallic surfaces Fast drying, can be painted without additional primer Versatile due to resistant, flexible, nongreasy, electrically conducting protective film which can be soldered on Uses: Protection for bright and electroplated ferrous materials for making good damaged zinc plated parts for coating weld and drilled areas Technical characteristics: Heat resistant up to approx +0 C Best results at room temperatures (over 1 C) Silvery shine, dust dry at 20 C after 15 minutes ml 9 034 9 034 040 400 040 Aerosol can 9 040 Leak detector spray with corrosion protection, DIN DVGW tested, nonflaable, nontoxic, for fast and reliable checking of: pipes and fittings, brake systems and cooling systems, welded and soldered connections, gas systems and compressed air systems Chemical products ml 400 9 040 040 Aerosol can 9 040 040 1 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

9 045 Corrosion inhibitor ideal protective film for preserving tools and precision parts ml 400 9 045 040 Aerosol can 9 045 040 9 0 Release spray Prevents adhesion and sintering on the gas nozzle and on the surface of the workpiece After treatment, workpieces can be easily painted, electroplated, black finished (chemically treated) and anodised Uses: protects weld nozzles acts as a release agent for inert gas shielded welding and electric welding Technical characteristics: Does not contain silicone Colour: clear ml 400 9 0 040 Aerosol can 9 0 040 9 055 Silicone spray Lubricant, antisieze and release agent, which cares, protects and lubricates; it is used wherever dirt, oil and greases cause contaminations, parting agent for plastics technology; rubber parts do not become brittle and are maintained; metal parts are protected against rust and damp; plastics do not become friable; protects tools and equipment, impregnates without greasing, do not use if parts are to be subsequently treated (painted, printed, etc) ml 400 9 055 040 Aerosol can 9 055 040 9 058 White grease spray Allpurpose grease, for vehicles, workshop, industry and household, highperformance grease for all moving parts, the white spray grease forms an extremely resilient, water resistant lubricant and antiseize film, has a wearreducing effect and provides protection against corrosion ml 400 9 058 040 Aerosol can 9 058 040 Chemical products Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 17

9 075 Compressed air oil / compressor oil For lubrication of pneumatic tools Non water soluble mineral oil For mixing with pipe oiler or compressed air oiler Try to avoid formation of oil mist ml 9 075 0 0 005 0 Soft bottle Soft bottle 9 075 005 9 093 Penetrating oil quick acting, highly active allpurpose maintenance oil, for all metals, properties: loosens rust, displaces water, creates iediate contact, particularly good penetration capability, even in difficult to access places, protects against corrosion, lubricates moving parts, reduces wear ml 400 9 093 040 Aerosol can 9 093 040 9 095 Rust remover with multiple effect, removes rust lightning fast, the allpurpose helper for industry and trade, new active ingredient combination with high capillary effect, very good creep properties, removes rust on screws, bolts, joints, etc, protects metals against corrosion, displaces moisture, forms a separating layer between bright metals and prevents squeaking noises ml 400 9 095 040 Aerosol can 9 095 040 9 WD 40 multipurpose spray cleans tools and machines of oil and dirt and protects against corrosion, displaces liquid and protects electrical and electronic parts 045: Sprays precisely in small localised areas and over larger surfaces thanks to the foldaway tube on the spray head Ideal for the workshop or operations Your advantage: Never again will you have to look for a small tube, no more attaching tube, one hand remains free + Chemical products ml 400 4 00 9 040 9 045 9 040 045 0 Aerosol can Aerosol can Canister with handheld atomiser 9 0 18 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

9 Multi7 fine maintenance 7fold effect; rust remover, cleaner, contact spray, corrosion inhibitor, water displacer, active lubricant, penetrating oil; highperformance spray for many areas, multi7 infiltrates and displaces moisture, prevents voltage losses and leakage currents, penetrates the finest gaps and capillary voids, removes rust, cleans stubborn dirt, removes squeaking and creaking, protects metallic surfaces against corrosion and provides an outstanding lubricating effect ml 9 1 400 015 040 Aerosol can Aerosol can 9 015 9 125 Ballistol allpurpose oil Rust inhibitor, high penetration capability, disinfecting capacity, low surface tension, lubricating activity for moving parts BALLISTOL does not gum, does not age and penetrates even the finest capillary cracks Very hypoallergenic Use for all types of tools, universal use ml 9 125 020 Aerosol can 9 125 020 9 140 Adhesive chain and rope lubricant Intensive adhesion and wear reducing, extremely resilient lubricant with extraordinary adhesive capability, corrosion inhibiting effect, for open gear units, ropes, chains, chain drives, etc, the product s elasticity enables lasting, corrosionresistant longterm lubrication which penetrates even the smallest voids ml 400 9 140 0 Aerosol can 9 140 0 9 143 Adhesive lubricant Universal use as lubricant and corrosion protection on guideways, etc Extreme water resistance, high lubricating film strength and top adhesion enable it to be used in even the most unfavourable operating conditions Outstanding underseal for vehicles Uses: Spray lubrication of sprockets, steering racks, chains, steel cables and other sliding surfaces Technical characteristics: Temperature resistance: 25 C to +180 C ml 0 9 143 040 Aerosol can 9 143 040 Chemical products Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 19

9 145 Multipurpose grease 140 with colloidal graphite Multipurpose grease for lubricating rolling contact and plain friction bearings, as well as for mixed film lubrication, at all slip velocities allowed for grease lubrication Friction and wear reduction even under high loads and stresses, protection of the bearing against contamination Corrosion proofing, maintenance of the lubricating effect even in seawater Uses: Agricultural machines, construction equipment, trucks, tractors, lifts, chargers, water pumps, etc Technical characteristics: Temperature resistance: 30 C to +130 C 9 145 040 9 145 140 Multipurpose grease in 400 g cartridge Longterm highpressure grease with graphite in 400 g cartridge 9 145 040 140 9 149 Low viscosity adhesive grease spray Natural coloured longterm grease for rolling contact and plain friction bearings, excellent oxidation resistance, water resistant, good adherence and protects against corrosions Designed for lubricating under difficult operating conditions as well as for highly loaded rolling contact and plain friction bearings Uses: For lubricating motor vehicles, industrial and construction machines Technical characteristics: Temperature resistance: 30 C to + C (short term up to 140 C also) Colour: natural coloured/lightcoloured ml 0 9 149 040 Aerosol can 9 149 040 9 151 Highpressure adhesive grease For lubricating rolling contact and plain friction bearings, as well as for mixed film lubrication, at all slip velocities allowed for grease lubrication Anticorrosion protection of sliding parts, especially cables Protects against corrosion, resistant against aggressive water, gases and alkali solutions Uses: open gears, screws, hinges Rolling contact and plain friction bearings, water pumps, water turbines, lock gates, vehicle washes, etc Technical characteristics: Temperature resistance: 25 C to +80 C Protects against seawater and salty air, good media resistance ml 0 9 151 040 Aerosol can 9 151 040 9 153 Battery post grease Special red grease for battery (terminal) posts and water pumps Uses: Protects against corrosion of battery posts Chemical products Technical characteristics: Temperature resistance: 30 C to +0 C ml 0 9 153 040 Tube 9 153 040 11 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

9 159 Multipurpose Vaseline Resin and acidfree, excellent allpurpose grease for lubricating locks, bearings, bolts, etc gr 9 159 008 Tube 9 159 008 9 15 Graphite Large crystalline natural graphite, finely ground, greasefree, odourless Uses: lubricates prevents dry locks, not previously lubricated, from freezing Technical characteristics: Colour: black g 9 15 005 Bottle 9 15 005 9 Antiseize 005 Loctite 800 Aluminiumbased antiseize for screws, nuts, pipe connections, heat exchangers, etc Typical Uses: Wheel hub connections 00 Loctite 805 Copperbased antiseize for screws, nuts, pipe connections, heat exchangers, etc Typical Uses: Exhaust pipes, brake calliper screws g 9 Product 20 20 005 Aluminium 00 C5A copper 9 005 9 00 9 2 AntiSeize thermal spray white, metalfree construction spray, designed for extreme conditions such as high pressure, temperatures, corrosion, etc, resistant against water, steam, salt solutions, gas, acids, alkali solutions, etc Examples of use: for disengaging heated screws on engines, turbines, burners and generators, for lubricating highly stressed screws and plugin connections made of stainless steel, steel and nonferrous metals, do not use with oxygen and acetylene ml 400 9 2 040 Aerosol can 9 2 040 9 215 Teflon spray Teflon based, firm drying permanent release, lubricant and antiseize agent Uses: For lubricating saw blades, threads, drawers, instruments, chutes, conveyor equipment Highly effective release agent for woodwork and plastic and rubber processing Technical characteristics: Greasefree Temperature resistance: 80 C to +20 C ml 400 9 215 040 Aerosol can 9 215 040 Chemical products Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 1111

9 218 Precision engineering oil Guaranteed resin and acidfree, clear, low viscosity, petroleum white oil, can be universally used as an oilbased rust preventative and for lubricating bicycle wheels, sewing machines, household and office machines, locks and tools, etc ml 9 218 Small plastic bottle 9 218 9 2 Coolant stick and cutting pastes Optimum performance for thread tapping both manually and on drills, ideally suited for cooling and lubrication solid form for applying 012 + 075 in soft form Products are chlorine free and are not deemed to be dangerous substances Weight g 9 2 9 2 075 9 2 Lubricant stick (wax) Cutting paste Cutting paste 300 7 012 075 9 257 Cooling lubricant / tapping fluid (concentrate) Coolant and cutting/chip removal agent with high degree of protection against corrosion, and with EP additives for the highest standards Products are chlorine free and are not deemed to be dangerous substances Uses: Foam stable, very suitable for CNC machines with high pressures Can be used for all materials, also very suitable for highstrength steels and internally cooled tools Particularly suitable for nonferrous metalworking Can be used as 1:25 (4% solution) for light up to 1: (% solution) for very difficult cutting and chip removal Advantages: Increased tool life compared to conventional coolants and cutting/chip removal agents No sticking, regardless of the concentration used Very hypoallergenic, ph value at 5% approx 89 No dangerous substances, chlorine, nitrite and formaldehydefree High degree of protection against corrosion even at low concentrations (from 3 %) Highpressure additives prevent tearing off of the lubrication film; even under the highest stresses in molecular strength it remains on the cutting tool Uses: Stir the coolant concentrate into required quantity of water or make the required emulsion ready for use using a mixer Chemical products Semitransparent emulsion (mineral oil fraction 40%) Product matched with bed track oils 8 and 220 (demulsifying) litre 5 25 209 9 257 005 0 025 Disposable canister Disposable canister Disposable canister Drum 9 257 005 025 9 257 1112 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

9 259 W 71 EcoLube cooling lubricant Description: Mineral oil, multifunctional emulsion Properties: Mineral oil based, concentration 4% Uses: General machining and cutting, all materials, similar to Primat EcoLube 97, allpurpose use Advantages/ Very good scavenging action (multifunctional), benefits: compatible with mixed materials and mixed processing, good corrosion protection Compatibility: All Primat EcoLube cooling lubricants are compatible with the usual hydraulic, bed track and spindle oils available on the market kg 9 259 25 9 025 09 Canister Canister Canister 9 259 9 21 W 97 EcoLube cooling lubricant Description: Properties: Uses: Advantages/ benefits: Compatibility: Vegetable oil added, multifunctional emulsion, Primarily aluminium machining/cutting Based on renewable raw materials made from plants, Concentration 57% General cutting/chip removal, all materials, especially for aluminium cutting and stainless steel machining, single flute reaming Very good lubrication performance at low concentrations, compatible with mixed material and mixed machining, finely dispersed, boronfree All Primat EcoLube cooling lubricants are compatible with the usual hydraulic, bed track and spindle oils available on the market kg 9 21 29 9 195 029 09 195 Canister Canister Drum 9 21 9 25 W 481 EcoLube grinding concentrate Description: Oilfree, grinding water additive Properties: Fully synthetic, concentration 34% Uses: All grinding operations, all materials Advantages/ Very good foam characteristics, low adhesive characteristics, good benefits: protection against corrosion, good emulsion shelf life and good abrasive disc tool life Compatibility: Primat EcoLube grinding concentrate is compatible with the usual hydraulic bed track and spindle oils available on the market kg 34 230 1 9 25 034 230 920 Canister Drum 9 25 Chemical products Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 1113

9 270 Cutting oil High quality allpurpose cutting oil based on natural raw materials Uses: For medium to very difficult cutting and chip removal Tried and tested with high alloy and stainless steels Ideally suited for drilling, thread tapping, reaming, groovedrawing, countersinking, turning, milling and sawing All steel grades, alloyed and unalloyed All cast metal grades, eg cast steel, grey cast iron and malleable cast iron Aluminium and copper as well as all chrome, nickel compounds; titanium, manganese Universal use for cutting, chip removal and forming/shaping, as well as in cooling circuits and in minimum lubrication systems Products are chlorine free and are not deemed to be dangerous substances also for highpressure spraying systems Advantages: Low tool wear Economical to use Maximum tool lives Greater cutting speeds and precise machining Properties: Natural product Biologically degradable Made from renewable raw materials Chlorine and mineral oil free 9 270 0 + 9 270 005 litre 9 270 025 03 05 5 005 0 Spray bottle Aerosol can Spray bottle Disposable canister Disposable canister 9 270 9 277 VG 5 thread cutting agent for drinking water systems Product is chlorine free and is not deemed to be a dangerous substance Tested according to the DVGW Leaflet and approved with the DVGW Test Number DW 0201AS3147 as a thread cutting agent for all machines, filling blocks and cutting tools for the installation of drinking water systems Uses: Pour, undiluted and not mixed with other cutting agents, into the cleaned cutting agent vessel Ensure good wetting / rinsing of the tools during cutting Keep the equipment clean Typical characteristics: Mineral oil free Water free Free of chlorine compounds Fully synthetic Does not corrode pipes, cutting tools, pipe cutting machines No sticking or resinification due to drying Can be stored from 20 C to + C (minimum values) Pumpable up to at least C In accordance with the regulations, the VG 5 thread cutting anent is dyed red so that any residues in the pipes are found during flushing 9 277 0 Chemical products Technical details: Liquid, red identification colour, almost odourless, density at 20 C 5 g/cm 2, viscosity at 15 C approx 30 mpas, ph value in g/l water approx 8, dissolves in water with any ratio, test method DIN 51 757 litre 5 9 277 0 Disposable canister 1114 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

9 314 Emulsion maintenance case For all measurements according to TRGS 11 In stable plastic case, with padded inserts and document compartment with recess for handheld refractometer Case contents: Nitrite test strips () Nitrate test strips () Total hardness test strips () ph test strips () Bacteria test set (3 test tubes) Measuring beaker Thermometer, digital 9 314 005 9 314 005 9 315 Handheld refractometer for checking emulsions and grinding solutions as well as coolants and lubricant liquids Advantages: longer tool life expectancy, prevention of rust due to emulsions mixed with too low concentrations, possibility of varying the emulsion concentration according to the requirements during operation, scale in degrees, well lit and easy to read Resolution 02 % Brix Measuring range % 0 32 9 315 9 315 9 3 PU oil binder PU foam granules type III/R, suitable for roads and rain Oil binder for all traffic areas as well as for workshops and industry Binds oils, greases, lubricants and fuels and all other leaked liquids Water repellent Bulk density: approx 390 g/l 1 l oil binder binds 042 l oil : 40 l = approx 18 kg, Grading range: 05 4 The product s own low weight helps to cut disposal costs 9 353 Oil binder Mineral binder type III/R Binds oils, greases, lubricants and fuels and all other leaked liquids Suitable for traffic areas Bulk density: approx 700 g/l 1 l oil binder binds 0,43 l oil : 30 l = approx 20 kg, Grading range: 05 1 9 35 PU oil binder, buoyant PU foam granules type I/II R, buoyant Ideal oil binder for workshops and industry as well as for bodies of water Binds oils, greases, lubricants and fuels and all other leaked liquids Bulk density: approx 245 g/l 1 l oil binder binds 0,52 l oil : l = approx 12 kg, Grading range: 05 4 The product s own low weight helps to cut disposal costs l 40 30 Prod No: 9 3 040 9 353 020 9 35 0 Size 18 kg bag 20 kg bag 12 kg bag Chemical products Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 1115

9 4 Brake cleaner Universal cleaning agent which contains a special degreasing solvent Removes stubborn dirt thoroughly and gently, quickdrying Uses: Cleaning of drum and disc brakes, brake pads, springs, shoes, clutches, couplings, etc Technical characteristics: Free of aromatic and halogenated (CH, CFC) hydrocarbons, acetone, butanol, ethyl acetate, etc 98% pure active ingredient, contains Co2T2 as propellant ml 0 9 4 005 Aerosol can 9 4 005 9 413 Stainless steel cleaner and maintenance spray Maintains, cleans and protects stainless steel surfaces Treated surfaces can be easily cleaned without scouring Uses: Stainless steel surfaces of dishwashers, work surfaces, cabinets, etc Technical characteristics: Also cleans large surfaces without streaking ml 400 9 413 004 Aerosol can 9 413 004 9 420 Cold cleaner solventfree, with quick releasing deemulsification property, slightly alkaline, removes heavy soiling with oil and grease l 9 420 5 25 005 0 025 9 423 Workshop cleaner aqueous, alkaline cleaner for cleaning and degreasing machines, tools, workshop equipment, vehicles, etc effectively removes oils, greases, resins, waxes, nicotine, insect dirt, food residues, soot, bitumen and tar splashes, etc cleans metals, plastic, tiles, wood, rubber, etc mild on the material being cleaned and nonabrasive biologically degradable according to EU Directives phosphatefree not subject to mandatory labelling in accordance with Dangerous Substances Regulations and EU Directives noncombustible highly concentrated, can be diluted up to 40 times corrosion inhibitors ensure temporary protection against corrosion oil separator compatible, tested according to ÖNORM B 55 Canister Canister Canister 9 420 0 ml 9 423 0 Spray bottle 9 423 Chemical products 9 42 Special spray cleaner with active formula for fast service use, highly active cleaner for thorough degreasing of all metals, removes resinified residues, wax, release agents, etc, displaces water, removes oil, grease, dirt and adhesive residues, check rubber and plastic parts for compatibility before spraying ml 0 9 42 005 Aerosol can Degreases all metals 9 42 005 111 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

9 430 Washingup liquid in soft bottles ml 9 430 7 0 075 14 9 430 075 9 430 9 432 Dishwasher cleaner Somat Professional tabs, in box kg 9 432 1 9 432 9 433 Rinse aid Somat, for dishwashers, in a soft bottle ml 0 9 433 8 9 433 9 435 Allpurpose cleaner Ajax liquid, in a soft bottle ml 9 435 0 12 9 435 9 439 Glass cleaner Universal cleaner for windows and glass panes Effortlessly removes nicotine residues, oil and grease Uses: Cleaning windows, glass panes, mirrors, headlamps, frames, etc Technical characteristics: Cleans thoroughly, without streaks ml 0 9 439 005 Spray bottle 9 439 005 Chemical products = ibemo UNIT FOR Kazakhstan PURCHASE OF ONE 090301 PACKAGING Republic UNIT PER of ORDER Kazakhstan, NUMBER PLEASE West ALWAYS Kazakhstan STATE NUMBER Oblast, OF ITEMS Aksai, IN ORDER Pramzone, BKKS office complex Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 1117

9 442 Scheibenklar windscreen cleaner Ensures reliable frost protection up to 30 C (tested according to ASTM) Creates a clear view in the suer and winter Uses: Frost protection and intensive cleaner for clear view Technical characteristics: Biologically degradable, with citrus fragrance ml 00 9 442 0 Canister 9 442 0 9 445 Special cleaner for TFT screens and LCD displays For mild cleaning of TFT and LC displays of PC and TV screens, laptops, PDAs, mobile phones, touch screens and navigation systems The stable active foam cleans without solvents such as alcohol, petrolbased cleaner s solvent or aonia ml 9 445 Aerosol can 9 445 9 4 Oil sweeping wood shavings impregnated with soap with floor maintenance components sandfree Product is not to be used as an oil absorbent kg 9 4 25 Box 9 4 Chemical products Hand protection in the Safety Products catalogue 1118 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

9 40 Acetone Low boiling point solvent with excellent solvent power for acetate, nitrocellulose and methacrylate paints Uses: for diluting paint as paint stripper/varnish remover dissolves heavy, oily, greasy and resinified dirt auxiliary agent in the processing of plastics Technical characteristics: String solvent and cleaning power, highly soluble in water, highly flaable l 1 9 40 0 Tin 9 40 0 9 41 Allpurpose nitro thinner Specially developed thinner for all coon paints such as nitrocellulose, hard gloss and chlorinated rubber paints High solvent power promotes the paint s flow properties and therefore lends the pain a high gloss finish Uses: Thinner and cleaning agent for painting and decorating firms For car body and vehicle manufacturing Cleaning painting equipment and spray guns Technical characteristics: Contains residuefree evaporating solvent l 9 41 1 0 Tin 9 41 0 9 42 White spirit Thinner and cleaning agent for painting and decorating firms and DIY enthusiasts Excellent cleaning agent for parquet and linoleum floors, tools For thinning paints Can be used in brush, roller, iersion and spraying methods Uses: Cleaning tools, eg brushes and rolls Removing dirt, grease and paint stains Thinning oil and synthetic resin and brushing varnishes Use on wood and stone floors, glass, textiles Technical characteristics: Mineral oil product, lower rate tax, may not be used as a propellant, heating material or lubricant l 1 9 42 0 Tin 9 42 0 9 43 Methylated spirits The high alcohol fraction makes it ideally suitable for cleaning and degreasing, thinning paints, as a solvent and as protection against frost Uses: Cleaning and degreasing glass, plastic, chrome, rubber Thinning spirit varnishes Antifreeze in windscreen washer systems (1:2) Technical characteristics: 94% by vol ethyl alcohol, highly flaable l 1 9 43 0 Soft bottle 9 43 0 Chemical products Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 1119

9 49 Solvent Super label remover Tried and tested in trade & industry and households for decades The KONTAKT CHEMIE label remover penetrates the paper label and dissolve the adhesive After a short time the label can be effortlessly removed in one go Also for removing adhesive residues of vignettes or tar stains New, redeveloped recipe for maximum solvent power Attachable metering brush for precise application for small labels too No more scratching, scraping, smoothing over! ml 9 49 Aerosol can 9 49 9 471 Cockpit spray For refreshing colour and maintenance of plastic parts Uses: For maintenance of dashboards, plastic roof linings, plastic trim and panelling in a vehicle Technical characteristics: Antistatic effect ml 9 471 400 004 Aerosol can 9 471 004 9 473 Mould remover For cleaning stained, dark joints in bathrooms and damp rooms and operating areas as well as black (mould) areas in rooms Does not affect or damage textiles, stone, marble, tiles or other sensitive surfaces Uses: Initial accretions of mould, prevents new mould growth Against algae, moss, mildew, fungi Against infestations of joints, tiles, stone, etc Iediate and longterm effect Technical characteristics: Chlorinefree and safe to use, odourless, biologically degradable ml 9 473 9 473 0 0 0 Spray bottle 9 474 Loctite 703 cleaner and degreaser Universal cleaner for cleaning and degreasing parts before applying adhesives and sealants Evaporates quickly and without residues Ideal surface preparation of glued surfaces Can be used on metals, glass, rubber, most plastics as well as painted surfaces No risk of flash rust on water sensitive parts Contains no ozone depleting substances ml 9 474 400 005 Aerosol can 9 474 005 9 47 Loctite 701 Superclean Ideal for cleaning metals, as well as for removing labels, marking paint, etc Contains acetone Chemical products ml 400 9 47 004 Aerosol can 9 47 004 1 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

9 478 Super foam Versatile foam cleaner for cleaning inside and outside cars Cleans door trims, upholstery, chrome and plastic parts as well as bumpers Also suitable for use in the household for tiles, synthetic leather, glass, painted surfaces, roller shutter blinds and window frames ml 400 9 478 004 Aerosol can 9 478 004 9 93 Loctite 7 Gasket remover Removes hardened gaskets, seals and adhesives from most metal surfaces within to 15 minutes Dissolves and removes lubricant, soot, dried oil, grease and paint Also suitable for use on wood ml 400 9 93 040 Aerosol can 9 93 040 9 9 Loctite 78 hand cleaner With pumice Natural hand cleaner made from citrus peel extracts, mineral oil free, contains important hand conditioning substances such as jojoba oil, lanolin and aloe Hand cleaner for highly soiled hands, eg after car repairs The addition of ground pumice increases the deep action and removes dirt without aggressive solvents ml 400 3000 9 9 040 300 Bottle Pump canister with wall bracket 040 300 9 511 Loctite 7855 hand cleaner Apart from finely ground pumice, also contains four important skin conditioning substances: lanolin, aloe, jojoba oil and vitamin E Removes residues of polyurethane, paint, resin, adhesive, silicone, tar, varnish, filler compound, primer, oilbased paint, grease, lubricant Ideal for painters, decorators, fitters and mechanics ml 400 17 9 511 040 175 Bottle Dispenser 040 175 Chemical products Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 1121

9 513 Loctite 7840 Natural Blue cleaner Biologically degradable, solventfree, nontoxic and noncombustible, can be diluted with water Removes grease, oil, cutting oil and workshop dirt 007 0 l 9 513 075 0 0 007 0 Spray bottle Canister Canister 9 51 Invisible glove For protecting hands Simply rub into the hands before starting the work and rinse off again with water after finishing the work Uses: Protects against oil, dirt and paint, petrol, varnish, etc Technical characteristics: Ingredients: Glycerine, water, silicates, sodium, tollomates, xanthan gum, stearic acid, perfume l 1 9 51 0 Tin 9 51 0 9 520 TRAVABON skin barrier cream Properties: Protects the skin when working in oily and waterinsoluble substances, makes it easier to clean the skin, increased protective effect due to skin protecting pigments Protects against, for example: Oils, paints, varnishes, graphite, metal dust, soot, waterinsoluble substances Description: Cream (suspension), water soluble, grease and siliconefree, with special dirt binding emulsifiers, scented ml 0 9 520 0 Tube Soft bottle 9 520 9 520 0 Chemical products 9 524 STOKO PROTECT+ soft cream Properties: Protects the skin during work in wet conditions, stabilises, regenerates and strengthens the skin barrier, quickly absorbed, with active complex made of bisabol oil and hamamelis (witch hazel) Protects against, for example: Frequent contact with aqueous substances such as watermiscible oils and cooling lubricants, aqueous solutions of pigments, acids, alkaline solutions, salts, cleaning agents and disinfectants, cement, lime and fertiliser, wearing of occlusive protective clothing Description: Soft cream (3phase W/O/W emulsion), conditioning (slightly greasy), contains no colourants/dyes, siliconefree, unscented, HACCP assessed ml 0 9 524 0 9 524 Tube Soft bottle 9 524 0 1122 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

9 527 STOKO UV 27 Special skin barrier cream Properties: Sun protection factor 27, broad protective effect due to combination of UVA and UVB filters, UVC protection to protect the skin during electric and arc welding, extremely waterproof, protective film resistant against transpiration, penetrates skin quickly Protects against, for example: intensive UV radiation during extreme sun exposure, electric welding and arc welding Description: Cream (W/O emulsion), siliconefree, medium conditioning properties (grease content), free of preservatives, scented, contains bisabol oil and vitamin E ml 9 527 Tube 9 527 9 531 STOKO Emulsion skin protection Properties: Protects the skin against softening during work in moist conditions and while wearing protective clothing, firms the skin under mechanical stresses, makes it easier to clean the skin when soiled with dyes Protects against, for example: When wearing gloves, mechanical stress due to eg tools, glass fibres; dyes & colourants Description: Lotion (O/W emulsion), slightly conditioning (greasy), siliconefree, with EUCORIOL skin protectant, scented 9 531 ml 9 531 2 0 0 Bottle Soft bottle 9 531 0 9 540 STOKO HAIR & BODY shower gel Properties: Shower gel with conditioner for combined body and hair washing, good hypoallergenic properties, with attractive fresh fragrance Effective against: slight soiling Description: Shower gel, with hypoallergenic sugar surfactant, matched to the ph value of human skin, soap free, scented 9 540 ml 2 0 9 540 020 Tube Soft bottle 9 540 020 9 545 FRAPANTOL skin cleaner Properties: Special creamy skin cleaner with mild cleaning power Effective against: slight soiling Description: Liquid cleaner, with washing raw materials which are kind to the skin, matched to the ph value of human skin, with pearl lustre, uncoloured, soap free, unscented ml 0 9 545 0 Rigid bottle 9 545 0 Chemical products Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 1123

9 548 SOLOPOL hand cleaner Properties: Hand cleaner with scrubbing agent for heavyduty skin cleansing, strong cleaning power, patented formulation Effective against: eg oils, greases, soot, graphite, metal dust, lubricants Description: Paste, with STOKOPON cleaning system (natural oil and surfactants), matched to the ph value of human skin, solvent free, with biologically degradable, patented scrubbing agent ASTOPON (refined walnut shell powder), with EUCORNOL skin protectant, soap free, scented ml 9 548 0 020 Soft bottle 9 548 020 9 551 KRESTOPOL hand cleaner Properties: Hand cleaner with scrubbing agent for extreme soiling, very strong cleaning power, patented formulation Effective against: eg oils, greases, soot, graphite, metal dust, lubricants Description: Paste, with STOKOPON cleaning system, matched to the ph value of human skin, solvent free, with biologically degradable, patented scrubbing agent ASTOPON (refined walnut shell powder), with EUCORNOL skin protectant, soap free, scented 9 551 ml 9 551 2 0 020 Tube Soft bottle 9 551 020 9 555 Hand cleaning paste kind to the skin, does not contain sand, creamy Special skin protectants protect and care for the hands l 9 555 0 Tub 9 555 0 Chemical products 9 558 KRESTO KWIK WIPES hand cleaning towels Properties: Hand cleaning towels for gentle heavyduty skin cleansing, for fast cleaning and precleaning without water, good hypoallergenic properties, fresh fragrance Effective against: eg oils, greases, soot, lubricants Description: Hand cleaning towels, moistened, with safe solvent, scented 9 558 9 558 007 Qty 70 007 Tub with 70 wipes 1124 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

9 570 STOKOLAN skin care cream Properties: Care cream for hands and face, tried and tested for stressed skin, quickly absorbed, has a calming effect on the skin; highly effective skin care Skin type: all skin types Description: Cream (O/W emulsion), silicone free, scented ml 0 9 570 0 9 570 Tube Soft bottle 9 570 0 9 573 STOKO VITAN skin care cream Properties: Care lotion for hands and face as well as the whole body, with grape seed oil, urea, allantoin, vitamin E for sustained and effective counteracting of the daily loss of moisture and natural skin oils, absorbs well, for care after washing or showering and after work which severely dries out the skin, with very high skin care effect Skin type: Especially recoended for dry and very dry skin Description: Lotion (W/O emulsion), silicone free, scented, HACCP assessed 9 573 Care cream 005 Care lotion ml 9 573 0 0 Tube Soft bottle 9 573 0 9 575 ESTOLAN skin care cream Properties: Care cream for hands and face, light basic care, is absorbed very quickly, slightly conditioning (slightly greasy) effect Skin type: all skin types Description: Cream (O/W emulsion), silicone free, scented ml 0 9 575 0 9 575 Tube Soft bottle 9 575 0 9 590 Dispenser systems Stoko Mat Vario: Wallmounted dispenser made of stainless steel, white coated, for holding 0 or 0 ml soft bottles Stoko Vario Ultra: Wallmounted dispenser made of impactresistant plastic, white, for holding 0 or 0 ml soft bottles For soft bottles volume 0 or 0 ml Stoko Mat Vario Stoko Vario Ultra Stainless steel Plastic 9 590 9 590 9 590 Chemical products Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 1125

9 00 PATTEX strong adhesive for gluing woodbased materials, rubber, leather, cork, felt, hard PVC, soft foams, metal, and may more g 9 00 9 00 125 0 125 Tube Tube Tin 9 00 9 05 Ponal Material: Ready to use, waterbased woodworker s white glue Intended use: Glues all types of wood, woodbased materials and HPL panels For assembly and construction gluing, joint gluing, surface gluing Is transparent when dry, shortterm water resistance Consumption: around 1 g/m 2 Pressure: at least 15 N/cm 2 9 05 9 05 g 225 025 Soft bottle 70 07 Soft bottle 9 07 Spray adhesive An easy and convenient spray adhesive compound for use in many areas As contact or pressure sensitive adhesive, depending on its use Glues cardboard boxes, cardboard, leather, rubber, and many more Has a high adhesive strength and dries quickly Temperature range: up to approx 80 C ml 400 9 07 040 9 09 Loctite 534 gasket stick Solid form adhesive Adhesive for solid seals and gaskets For fixing during construction assembly and installation For use on all rubber, cork, paper or metal seals or gaskets Aerosol can 9 07 040 g 9 09 19 019 Adhesive stick 9 09 019 9 12 Instant adhesive (super glue) Glues smooth and porous materials Uses: Ceramics, wood, rubber, plastic, PVC, glass, metal, etc Technical characteristics: Temperature resistance: C to +80 C Glued gap: 001, firm to touch after between 330 seconds Sets through moisture in air g 3 9 12 Tube 9 12 Chemical products 9 14 PATTEX superglue for all iediate repairs of all kinds of different materials, eg porcelain, ceramics, wood, leather, rubber, plastics, metal, cork, cardboard g 3 9 14 Tube 9 14 112 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

9 17 Loctite 401 instant adhesive Allpurpose instant adhesive (cyanoacrylate) Glues all kinds of different materials (metals, rubber, wood, cardboard, ceramics as well as most plastics) to themselves and each other Very high strength in small gaps 005 020 0 g 9 17 3 5 20 005 020 0 Tube Bottle Bottle Bottle 9 18 Loctite 480 instant adhesive Black, impact resistant instant adhesive For gluing metal/metal and metal/rubber Top resistance against shear and impact loads Fixes small plastic gear wheels onto metal axles Fixing rubber seals or gaskets onto metal parts Gluing magnets in plastic housings g 9 18 20 020 Bottle 9 18 020 9 19 Loctite 48 instant adhesive Flexible instant adhesive, use in the manufacture, maintenance and repair of flexible materials as well as for fixing flexible parts onto dimensionally stable substrates g 9 19 5 20 005 020 Bottle Bottle 9 19 005 9 19 020 9 21 Loctite 454 allpurpose instant adhesive Instant adhesive gel for gluing metals, composite materials, wood, cork, foam, leather, cardboard, paper and ceramics Good gapfilling capacity Recoended for use on vertical surfaces or for overhead work Also suitable for automated product application g 3 20 9 21 020 Tube Tube 020 Chemical products Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 1127

9 25 Fast epoxy adhesive For fast bonding of different material pairs Flowable product! Uses: for highstrength gluing and as filling compound for parts made of ceramic, stoneware, wood, metal, etc Technical characteristics: Temperature resistance: 40 C to + C Glued gap: >005, firm to touch after approx 5 minutes Setting: twocomponent adhesive 9 25 004 ml 9 25 24 004 Syringe 9 28 2component adhesive 330/7388 Twocomponent adhesive with high tensile and shear strength Bonds virtually all materials with each other and themselves (except rubber) High resistance to solvents, moisture as well as high impact resistance and peel strength No mixing of the components Apply activator to a surface, apply glue to the opposite piece and join the parts together Ideal for bonding metal/metal ml 9 28 9 28 025 /40 025 Tube/can 9 30 Loctite 3430 epoxy adhesive Five minute, 2component epoxy adhesive, for uses requiring visually transparent bonding Ideal for gluing glass, decorative panels and displays as well as general doityourself applications Specifications: Medium viscosity, highly transparent, highstrength 9 30 9 30 024 ml 24 024 Syringe 9 31 Loctite 34 epoxy adhesive Five minute 2 component epoxy adhesive suitable for gap repairs and filling Ideal for gluing and filling damaged components For repairing cracks in housings Specifications: Medium viscosity, steelfilled, high strength Chemical products ml 25 9 31 025 Syringe 9 31 025 1128 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

9 33 Loctite 343 epoxy adhesive Fastsetting 2 component epoxy adhesive suitable for emergency repairs to metal parts Ideal for sealing leaking vessels and pipes, filling oversized threaded holes, smoothing welds and repairing small cracks in castings Specifications: Steelfilled, workable, also sets under water g 114 9 33 0 114 Stick Stick 0 114 9 35 Loctite 40 instant adhesive Fast gluing of rubber (including EPDM), plastics and elastomers Used in conjunction with Loctite 7239 primer, even difficult to bond plastics can be glued to each other Uses: Gluing silicone rubber onto a plastic housing of a vehicle lock system Fixing a plastic part onto a fire extinguisher Making O rings with the Loctite ORing set ml 9 35 20 020 0 Bottle Bottle 9 35 020 9 3 Loctite 495 instant adhesive low viscosity for gluing rubber, metal and plastic very suitable for narrow gaps g 9 3 20 0 020 0 0 Bottle Bottle Bottle Bottle 9 3 020 9 48 Adhesive and sealant remover For gentle removal of adhesive and sealant/gasket residues Replaces mechanical tools Uses: For fast removal of old gasket remains, set adhesive residues as well as varnishes and paints, oils, resins, tars, greases, lubricants and slip agents Technical characteristics: Colour: clear, slightly turbid, strong releasing effect ml 400 9 48 040 Aerosol can 9 48 040 Chemical products Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 1129

9 Pipe and thread seals prevent corrosion in the thread, seal up to burst pressure and have excellent resistance to most media used in industry 9 Gr 9 For thread joints up to Initiating torque Thread Nm max residual torque N 2 Fixture strength at room temp steel/steel minutes Temperature resistance C Use 005 M 80 R3 18 22 14 15 30 55 to +1 low strength, for sealing pipe and threaded joints, removable 0 015 020 M 20 R3/4 M 80 R3 M 5 R2 12 1 7 15 35 18 24 2 4 25 45 20 20 40 0 90 55 to +1 55 to +1 55 to +1 mediumhard, for hydraulic and pneumatic sealing, for threaded through joints, universal use, removable for sealing pipe and threaded joints with Teflon additive, removable highstrength, extra strong pipe and hydraulic seal for sealing and fixing 9 53 Loctite 577 thread seal liquid thread seal for sealing and locking metal threads up to max R3 (M80) Suitable for metal threads only, ideal for hydraulic and pneumatic circuits, eg brake systems, air conditioning systems or power assisted steering, permanent and reliable sealing effect, replaces hemp, pastes, PTFE tapes 9 53 005 ml 9 53 2 005 2 Tube Tube 9 53 2 9 55 Loctite 55 thread seal for use on plastic and metal threads, especially for the heating and plumbing sector, Loctite 55 replaces hemp, pastes and PTFE tapes, Approvals: DVGW test mark DV5142 AU 01 (based on tests to DIN 300, EN 7512), KTW recoendation, BS 920 m 9 55 1 015 Tin 9 55 015 Chemical products 9 58 Loctite 51 thread seal Suitable for all coarse thread joints made of metal which are once more to be made easy to release g 19 9 58 00 Stick 9 58 00 1130 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

9 5 Acrylic Highquality, single component acrylic dispersion sealing compound for indoor and outdoor seals, can be painted over Uses: Sealing joints and connections with up to 15% deformation Cracks in masonry and plaster Filling/smoothing over cracks in all kinds of walls, etc Technical characteristics: Temperature resistance: 20 C to +80 C Working temperature: 5 C to +30 C Colour transparent white 9 72 Plumbing silicone, acetate crosslinking Single component jointing compound, for sealing joints in sanitary rooms, bathrooms and kitchens With fungicidal effect for sanitary applications Very good workability, good adhesion, fast skin formation, mould inhibitor Uses: Sealing joints in damp rooms, connection joints in kitchens Construction, assembly, installation and sealing of shower cubicles and saunas, etc Not suitable for aquariums Technical characteristics: Optimum resistance against household chemicals Basis: Polysiloxane Temperature resistance: 0 C to + C Colour transparent white grey 9 73 020 9 5 9 8 Silicone sealant permanently elastic, fungicidal, allpurpose sealant and adhesive for indoor and outdoor use which sets virtually without shrinkage, temperature resistant from C to +1 C (shortterm up to +180 C) Colour transparent white grey 9 70 Silicone Single component, siliconebased jointing compound, permanently elastic, acetate crosslinking, cannot be painted over Fast skin formation, good adhesion on glass, enamel, tiles and stainless steel Uses: Jointing and sealing glass and windows For joints in kitchens and in sanitary areas Weatherexposed expansion joints in outdoor areas and for interior finishings, etc Technical characteristics: Working temperature: +1 C to +30 C Temperature resistance: 0 C to + C Colour transparent white grey 9 8 005 9 70 005 9 72 005 9 73 Hightemperature silicone Siliconebased adhesive and sealant specially developed for sealing engines and machine parts Cannot be painted over Uses: As substitute for most solid seals in engines, machines, etc Technical characteristics: Temperature resistance: to +2 C (shortterm up to +300 C) 3 ml, cartridge 3 ml, cartridge 3 ml, cartridge 3 ml, cartridge 3 ml, cartridge 3 ml, cartridge 3 ml, cartridge 3 ml, cartridge 3 ml, cartridge 3 ml, cartridge 3 ml, cartridge 3 ml, cartridge 9 8 9 73 020 9 5 9 70 9 72 Chemical products Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 1131

9 75 Silicone remover with brush and spatula/filling knife A ready to use gel for removing cured sealants Uses: Removal of cured silicones, MS polymers, butyl sealants and acrylate sealants ml 9 75 Tube 9 75 9 79 PU sealant for metalworking Single component, polyurethanebased jointing compound with high modulus Permanently elastic after curing, excellent chemical resistance Uses: Sealing and adhesive applications in the construction and metalworking industries Structural bonding in vibrating constructions, etc Technical characteristics: Good adhesion to different materials Temperature resistance: 30 C to +90 C Can be painted over after curing Resistant to hydraulic oil ml 3 9 79 005 Cartridge 9 79 005 9 80 Construction adhesive Neoprene rubber based, pasty adhesive containing solvent Suitable for indoor and outdoor use Levels out slight unevenness on the bonding surface Uses: Gluing skirting boards, sills, decorative mouldings, ceramics, etc on wood, concrete, stone, metal Not suitable for polystyrene, PP and PE Technical characteristics: Fast drying, water resistant Setting: Firm to touch in 20 minutes ml 3 9 80 031 Cartridge 9 80 031 9 85 PU construction foams Cure to form a semihard, mainly closed pore, firm foam Ageing resistant, rotting and vermin proof Very good adhesion to all materials such as concrete, masonry, plaster, etc with diverse uses Chemical products ml 0 0 400 9 85 005 0 040 1 component foam Rapid foam 2 component foam Spray can Spray can Spray can 9 85 005 1132 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

9 90 Manual caulking guns for 3 ml cartridges, 005 Professional type, very stable, also suitable for tough, viscous products 0 closed craftsman gun, handle made of die casting, soft long stroke, with contour piston 005 9 90 Halfopen frame without gear rack Halfopen frame with gear rack Skeleton Closed replacement tip for 0 005 0 1 0 9 700 Hylomar permanently plastic allpurpose seal does not harden, withstands even extreme sealing problems High temperature range of C to +300 C Unlimited shelf life, even if the container is already open ml 80 9 700 008 Tube 9 700 008 9 700 Loctite 8 shaft/ hub connection Solid form Medium strength joint adhesive Suitable for difficult to access areas to be glued Recoended as allpurpose jointing product with medium strength g 19 9 700 019 Stick 9 700 019 Chemical products Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 1133

9 703 Retaining compounds are applied as liquids and penetrate the surface roughness of the workpieces where they completely fill the voids of the parts to be joined and after they have fully cured establish an absolute adhesive force closure 9 703 Gr 9 703 Gap Initiating torque thread Nm Compressive shear strength in N 2 Fixture strength at room temp steel/steel minutes Temperature resistance C Use a 0 020 0 005 020 005 012 25 30 35 45 30 35 17 22 20 35 25 35 5 2 5 2 5 55 to +1 55 to +1 55 to +175 for gluing on and in shafts, bearings and bushings, very low viscosity, hard to remove Highstrength retaining compound, for bonding parts to be joined which are subject to high dynamic stresses, fast curing Retaining compounds with particularly high strength for bonding in bearings and bushings, difficult to remove 9 70 Loctite 03 retainer Oiltolerant retainer with wide range of uses, particularly suitable for fixing bearings, tolerates slight oiltype soiling, for gaps from 005 to 01 wide, tested and recoended by leading rolling contact bearing manufacturers, Temperature range 55 to +1 C ml 9 70 2 0 0 2 Bottle Bottle Bottle 0 0 2 9 708 Loctite 38 retainer Special retainer with very large gap filling capacity and fast fixture strength (setting) For gaps up to 025 wide Temperature resistant up to 1 C Fixture strength (setting) achieved after 5 minutes ml 9 708 2 0 0 2 Bottle Bottle Bottle 0 0 2 9 7 Loctite 48 retainer Allpurpose retainer with a temperature resistance up to 175 C Gap filling capacity up to 015 wide Fixture strength (setting) after 5 minutes For bonding bushings, bearings and other cylindrical objects Chemical products ml 5 2 9 7 005 0 0 2 Bottle Bottle Bottle Bottle 005 0 0 2 1134 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

9 712 Flange sealants are solventfree sealants applied in liquid form; a seal is formed by air exclusion and metal contact which adapts to and reliably seals the shape of the area it is sealing 9 712 Size 9 712 Gap Fixture strength at room temp steel/steel minutes Final strength hrs Temperature resistance C Use 03 20 40 24 55 to +1 particularly suitable for smooth surfaces, can be applied to narrow webs with rolls or brushes, flexible 05 15 30 24 55 to +1 allpurpose product for almost all production and repair uses, flexible 9 714 Loctite 59 flexible flange sealants permanently elastic surface sealant for nontorsionally rigid flanges and for plastic/plastic and metal/plastic combinations Can also be used as replacement for solid seals ml 9 714 300 0 300 Cartridge Cartridge 0 300 9 71 Loctite 518 flexible flange sealants Seals gaps up to 05 thick, also ideal for aluminium flanges; due to its gellike consistency, this product is ideally suitable for overhead work as well as for work on vertical surfaces (does not drip) ml 9 71 25 025 0 Syringe Cartridge 025 0 9 718 Loctite 548 flexible flange sealants Solid form Recoended for all torsionally stiff iron, steel and aluminium flanges g 18 9 718 018 Stick 9 718 018 Chemical products Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 1135

9 728 Threadlockers for vibration and shockfree locking of all types of transversely and axially loaded threaded connections 9 728 Size 9 728 For thread joints up to Initiating torque Thread Nm max residual torque N 2 Fixture strength at room temp steel/steel minutes Temperature resistance C Use 005 007 009 M 5 R2 M 24 M 3 M 20 R 1/2 M 80 R3 7 14 18 17 22 28 35 15 2 4 5 8 8 12 5 12 18 20 40 20 20 20 15 30 55 to +1 55 to +1 55 to +1 55 to +1 55 to +1 low strength, sealing of coarse threads up to R2, removable medium hard, for locking screws and hydraulic connections, under vibration and impact, normal removability for locking screws subject to impact and vibration, allpurpose product, normal removability highstrength, allpurpose product for locking and sealing threaded bolts and cylindrical parts, difficult to remove for large threaded parts, for locking and sealing 9 730 Loctite 243 threadlocker locks screws, nuts and studs against loosening under vibrations and simultaneously seals, for threads up to M3, can be removed with normal tools, allpurpose product, can be used instead of Loctite 242 ml 9 730 5 2 005 0 0 2 Bottle Bottle Bottle Bottle 005 0 0 2 Chemical products 9 732 Loctite 2701 threadlocker locks screws, nuts and studs subject to high vibration and impact stresses to prevent them from loosening and simultaneously seals For permanent threaded connections which must not be allowed to come undone, difficult to remove with normal tools (heat to 300 C), also suitable for fixing parts to be joined together ml 5 9 732 005 0 0 Bottle Bottle Bottle 005 0 0 113 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

9 734 Threadlocker 004 Loctite 248 Suitable for all threaded connections made of metal Recoended for uses requiring dismantling with hand tools pumps, compressors, gears, machine tools, presses and retaining screws 00 Loctite 28 Recoended for threaded connections which generally do not have to be undone again wheel suspensions, bearing covers and studs in pumps or engines 9 734 004 9 734 00 Thread size 9 734 Functional strength Product g hrs property 19 up to M 004 after medium strength 19 up to M 00 after 24 high strength 9 73 Screw assembly paste for very high temperatures, low friction value, prevents sticking/fusing and sticking due to rusting of screws, fitting pieces/shims and sliding surfaces, temperature range of 30 C to + 1 C g 9 73 0 Tin 9 73 9 740 Loctite 5 sealant Anaerobic, singlecomponent surface and flange sealant for sealing dimensionally stable metal surfaces Highstrength with a temperature resistance up to max C Cures under exclusion of under oxygen and metal contact of the fitting parts Recoended for sealing stiff flanges in pumps, clutches/couplings, gears and engine blocks For sealing dimensionally stable metal parts ml 9 740 0 Bottle 9 740 0 9 742 Loctite 542 sealant Thread seal for highly stressed fine thread connections made of metal in hydraulic and pneumatic systems For use in mechanical engineering, the automotive industry and in agricultural and construction machines ml 9 742 2 0 0 2 Bottle Bottle Bottle 9 742 0 9 744 Loctite 572 sealant Recoended for all coarse threads made of metal in which slow curing of the thread seal is required For example: Fittings, taps, valves ml 2 9 744 0 2 Bottle Bottle 9 744 0 Chemical products Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 1137

9 70 Cold metal an epoxy kit for quick repairs, fills holes, grooves and scratches in tanks, barrels/drums, pipes, etc, adheres, among other things, to metal, wood and to damp substrates and under water g 114 9 70 114 Bar 9 70 114 9 73 Liquid metal an epoxy kit for insitu repairs, fills cracks, holes, incorrectly made drill holes and much more, practical double syringe, ensures correct mix ratio ml 9 73 24 024 0 1 Double syringe Double syringe Press for ml syringe 9 73 9 770 Loctite 0 Quick Metal for easy repair of bearings, bushings and shafts, high strength, simultaneously prevents rusting, particularly suitable for bridging large gaps, ideal for backlash compensation in knocked out featherkeys and wedge profiles ml 9 770 0 Bottle 9 770 0 9 8 Multi Tape repair tape Selfwelding breakdown and repair tape, used on power and distribution cables up to 4 kv, protects against corrosion on metal pipes A universal product for repairing hoses too, which guarantees water and ozone resistance : 5 m Roll width 19 9 8 9 8 Chemical products 9 852 Fabric tape particularly strong adhesive, tearproof, UV resistant, also suitable for sealing metal or plastic pipes, m long role Roll width 9 852 9 852 1138 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

9 855 Adhesive tapes PVC, selfadhesive, ideal visual aid for organising and sorting, m long roll 005 008 012 Colour 9 855 Roll width white red yellow blue 005 008 012 19 19 19 19 9 858 Masking tapes Standard quality, heat resistant up to 0 C, for painting and decorating work, m long roll Roll width 9 858 19 30 519 530 5 519 530 5 9 81 Doublesided adhesive tapes For connecting, holding and fixing all kinds of different materials Extremely tearproof and strongly adherent Heat resistant up to 70 C Cold resistant up to 20 C Roll width Roll length m 9 81 38 25 25 238 2 9 81 238 9 81 2 9 83 Packing tapes PP selfadhesive, m long roll Colour Roll width 9 83 transparent brown 9 83 9 83 9 85 Adhesive tape dispenser with tape tension brake, for adhesive tapes No 8 593 Supplied without adhesive tape for roll width 9 85 9 85 Chemical products Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 1139

Extract from the Welding and Cutting catalogue! 9 201 Antox 71 E, colourless pickling paste Uses: For removing oxide and scale and temper colours and tarnishing on welds, for pickling surfaces, very high yield kg Yield m/m 2 9 201 Exposure time min 2 80 1 / 5 8 1 9 201 1 9 201 Antox 73 E, pickling paste Uses: Pickling of welds and surfaces in one operation kg Yield m/m 2 9 201 Exposure time min 0 201 5 0 9 201 201 9 201 Antox 80 E, pickling paste Uses: Picking stainless steel parts using iersion methods kg Yield m/m 2 9 201 Exposure time min 30 approx 4 403 5 0 9 201 403 9 201 Antox NP neutralisation paste Uses: Neutralises highly acidic stainless steel pastes containing hydrofluoric acid, eg Antox 71 E, on the metal surface kg Yield m/m 2 9 201 Exposure time min 2 approx 4 01 5 0 9 201 01 Chemische Produkte 9 201 Pickling brush 40 bent 9 201 713 Head width 9 201 713 1140 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom

9 280 KD Check in 0 ml aerosol can 9 280 KARL DEUTSCH Description KD Check RDP1, red KD Check PR2 KD Check SD1 0 1 Penetrant Cleaner Developer 9 280 0 1 9 285 Indicator Indicator/detecting agent for the magnetic powder crack test KARL DEUTSCH 9 285 Fluxa concentrate, black 0, 0 ml aerosol can Fluxa background colour, white, 400 ml aerosol can 0 0 0 0 9 287 Indicator, fluorescent Indicator/detecting agent for the magnetic powder crack test KARL DEUTSCH 9 287 Fluxa concentrate, HS0, 0 ml aerosol can 0 0 9 300 Crack tester Nondestructive material test, redwhite, according to the penetrant method for making cracks and pores visible, CFC free Procedure: Spray on Contrast Red Leave to take effect for at 5 minutes Wash off with cleaner and leave to dry Thinly spray on developer Imperfection becomes visible after 12 minutes Description Contrast Red Cleaner Developer, wipe resistant Developer, can be wiped off 9 300 1 201 301 311 ml 0 0 0 0 9 300 1 Chemical products Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom 1141

9 301 Welding antispatter spray Silicone free Prevents spatter from adhering to workpiece surfaces and to the gas nozzles during welding, CFC free 203 Without dichloromethane / aerosol can ml 9 301 400 400 201 203 9 301 9 301 Düsofix welding antispatter paste for MIG/MAG inert gas burner, prevents spatter from adhering / can g 9 301 300 301 9 301 301 9 301 Release agent/antispatter agent, ready to use environmentally friendly release agent containing water for inert gas and electric welding Prevents spatter from burn onto the workpieces and therefore avoids laborious reworking of the workpieces Easy to remove the slag during arc welding with electrodes, also for V welds Very easy to clean welds Also prevents spatter from burning into the weld equipment heads during inert gas and contact welding If used properly, no subsequent difficulties during painting, zinc plating, electroplating, bluing, etc Fully noncombustible and therefore safe to use at the workplace Product is not a dangerous substance and does not require mandatory labelling No waste spray cans No release of CFC/CH or combustible propane/butane 9 301 230 0 ml 5 kg kg 25 kg 9 301 220 225 230 235 Spray bottle Canister Canister Canister 9 301 220 9 2 Aluminium adhesive tape 301 307 with masking tape Chemical products Width 25 38 25 38 9 2 301 304 307 321 324 327 9 2 1142 Phone: +7 71133 93077 ; Fax: +7 71133 93074 ; EMail: info@ibemokzcom