0MQ00NPbF SCHOTTKY RECTIFIER 2. Amp I F(A) = 2.Amp R = 00 Major Ratings and Characteristics Characteristics alue Units I F DC 2. A RRM 00 I FSM @ tp = 5 µs sine 20 A F @.5Apk, T =25 C 0.68 J range - 55 to 50 C Description/ Features The 0MQ00NPbF surface mount Schottky rectifier has been designed for applications requiring low forward drop and very small foot prints on PC boards. Typical applications are in disk drives, switching power supplies, converters, free-wheeling diodes, battery charging, and reverse battery protection. Small foot print, surface mountable Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Lead-Free ("PbF" suffix) Case Styles 0MQ00NPbF SMA
0MQ00NPbF oltage Ratings R Part number Max. DC Reverse oltage () RWM Max. Working Peak Reverse oltage () 0MQ00NPbF 00 Absolute Maximum Ratings Parameters 0MQ Units Conditions I F(A) Max. Average Forward Current.5 A 50% duty cycle @ T L = 26 C, rectangular wave form. * See Fig. 4 On PC board 9mm 2 island (.03mm thick copper pad area) I FSM Max. Peak One Cycle Non-Repetitive 20 5µs Sine or 3µs Rect. pulse Following any rated A load condition and Surge Current * See Fig. 6, = 25 C 30 0ms Sine or 6ms Rect. pulse with rated RRM applied E AS Non-Repetitive Avalanche Energy.0 mj = 25 C, I AS = 0.5A, L = 8mH I AR Repetitive Avalanche Current 0.5 A Electrical Specifications Parameters 0MQ Units Conditions FM 0.63 I RM Max. Forward oltage Drop Max. Reverse Leakage Current () () @ A 0. 0.78 ma = 25 C @ A 0.68 * See Fig. * See Fig. 2 @.5A 0.85 ma = 25 C @.5A = 25 C = 25 C R = rated R F(TO) Threshold oltage 0.52 = max. r t Forward Slope Resistance 78.4 mω C T Typical Junction Capacitance 38 pf R = 0 DC, = 25 C, test signal = Mhz L S Typical Series Inductance 2.0 nh Measured lead to lead 5mm from package body dv/dt Max. oltage Rate of Change 0000 /µs (Rated R ) () Pulse Width < 300µs, Duty Cycle < 2% Thermal-Mechanical Specifications Parameters 0MQ Units Conditions Max. Junction Temperature Range (*) - 55 to 50 C T stg Max. Storage Temperature Range - 55 to 50 C R thja Max. Thermal Resistance Junction 80 C/W DC operation to Ambient wt Approximate Weight 0.07(0.002) g (oz.) Case Style SMA Similar D-64 Device Marking IRJ (*) dptot < thermal runaway condition for a diode on its own heatsink dtj Rth( j-a) 2
0MQ00NPbF 0 Reverse Current - I (ma) R 0. 0.0 0.00 0.000 = 50 C 25 C 00 C 75 C 50 C 25 C Instantaneous Forward Current - I (A) F = 50 C = 25 C = 25 C 0 0 20 40 60 80 00 00 Reverse oltage - R() Fig. 2 - Typical Peak Reverse Current s. Reverse oltage 0. 0.4 0.6 0.8.2.4.6 Forward oltage Drop - FM () Fig. - Maximum Forward oltage Drop Characteristics Junction Capacitance - C T (pf) 0 T = 25 C J 0 20 40 60 80 00 Reverse oltage - R() Fig. 3 - Typical Junction Capacitance s. Reverse oltage 3
0MQ00NPbF Allowable Case Temperature - ( C) 50 40 30 20 0 00 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 Square wave (D = 0.50) 80% Rated applied R DC se e note (2) 90 0 0.4 0.8.2.6 2 2.4 Average Power Loss - (Watts).6.4.2 0.8 0.6 0.4 0.2 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 RMS Limit DC 0 0 0.4 0.8.2.6 2 2.4 Average Forward Current - I F(A) (A) Average Forward Current - I F(A) (A) Fig. 4 - Maximum Average Forward Current s. Allowable Lead Temperature Fig. 5 - Maximum Average Forward Dissipation s. Average Forward Current Non - Repetitive Surge Current - I FSM (A) 00 Tj = 25 C At Any Rated Load Condition And With Rated rrm Applied Following Surge 0 0 00 000 0000 Square Wave Pulse Duration - t p (microsec) Fig. 6 - Maximum Peak Surge Forward Current s. Pulse Duration (2) Formula used: T C = - (Pd + Pd RE ) x R thjc ; Pd = Forward Power Loss = I F(A) x FM @ (I F(A) / D) (see Fig. 6); Pd RE = Inverse Power Loss = R x I R ( - D); I R @ R = 80% rated R 4
0MQ00NPbF Outline Table Device Marking: IRJ CATHODE ANODE.40 (.055).60 (.062) 2.50 (.098) 2.90 (.4) 2 4.00 (.57) POLARITY 2 PART NUMBER 4.60 (.8) 2.00 (.078) 2.44 (.096).52 (.006).305 (.02) 2.0 MAX. (.085 MAX. ).47 MIN. (.058 MIN.) 0.76 (.030).52 (.060) 4.80 (.88) 5.28 (.208).03 (.004).203 (.008).27 MIN. (.050 MIN.) 5.53 (.28) SOLDERING PAD Outline SMA Dimensions in millimeters and (inches) For recommended footprint and soldering techniques refer to application note #AN-994 Marking & Identification Each device has 2 rows for identification. The first row designates the device as manufactured by International Rectifier, indicated by the letters "IR", and the Part Number (indicates the current, the voltage rating and Schottky Generation). The second row indicates the year, the week of manufacturing and the Site ID. IRJ OLTAGE CURRENT IR LOGO PYWWX SITE ID WEEK 2nd digit of the YEAR "Y" = st digit of the YEAR "standard product" "P" = "Lead-Free" 5
0MQ00NPbF Tape & Reel Information Dimensions in millimetres and (inches) Ordering Information Table Device Code 0 M Q 00 N TR PbF 2 3 4 5 6 7 - Current Rating 2 - M = SMA 3 - Q = Schottky Q Series 4 - oltage Rating (00 = 00) 5 - N = New SMA 6 - none= Box (000 pieces) TR = Tape & Reel (7500 pieces) 7 - none= Standard Production PbF = Lead-Free Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (30) 252-705 TAC Fax: (30) 252-7309 06/04 6
Legal Disclaimer Notice ishay Notice The products described herein were acquired by ishay Intertechnology, Inc., as part of its acquisition of International Rectifier s Power Control Systems (PCS) business, which closed in April 2007. Specifications of the products displayed herein are pending review by ishay and are subject to the terms and conditions shown below. Specifications of the products displayed herein are subject to change without notice. ishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in ishay's terms and conditions of sale for such products, ishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of ishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify ishay for any damages resulting from such improper use or sale. Document Number: 9990 Revision: 08-Mar-07