Architectural Accessories & Door Trim

Architectural Accessories & Door Trim McKinney Distributors' Net Book s Effective January, 206 2006-205 McKinney Products Company

general information Table of Contents General Information... GEN- GEN-8 es... GEN-3 GEN-4 Options... GEN-5 GEN-6 Index... GEN-7 Buying Program Codes... GEN-8 Full Mortise Hinges... FM- FM-23 MacPro... FM-22, FM-23 Electric Hinges... EH- EH- MacPro Electric Hinges... EH-7 Full Mortise Anchor Hinge Sets... AH- AH-4 Half Mortise Hinges... HM- HM-3 Half Surface Hinges and Back Plates... HS- HS-3 Full Surface Hinges... FS- FS-2 Spring Hinges & Pivots... SH- SH-4 MacPro... SH-2 Rescue Hardware... RH- Specialty Hinges & Residential... SP- StormPro Hinges... SP- Designer Hardware - Deco Tips... DH- DH-5 Aluminum Continuous Geared Hinges... CG- CG-5 Steel & Stainless Pin and Barrel Continuous Hinges... CH- CH-9 Power Transfer Locator Templates... CH-0 3-Day QuickShip Program... QS- QS-5 Stocking Programs (Ventura, CA & Mason City, IA)... QS-5 Berlin, CT Stocking Program... QS-6 QS-9 s Effective January, 206 GEN-2 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

ACCEPTANCE McKinney reserves the right to decline an order, in whole or in part, when the type or quantity of goods or credit worthiness of the Purchaser is not satisfactory to us in our sole and absolute discretion. Purchase Orders, Competitive Quotation ( CPQ ) requests, Acknowledgements or the like issued by the Purchaser that have contrary standard terms and conditions are not binding on McKinney, unless such terms and conditions are approved in a separate written agreement by McKinney authorized representatives. In the event of an acceptance of Purchaser s Purchase Order by McKinney, the Purchaser agrees that such acceptance is solely conditioned on Purchaser s acceptance of the terms and conditions set forth in this instrument, regardless of the terms and conditions specified in Purchaser s Purchase Order. The terms and conditions in Purchaser s Purchase Order which conflict with the terms and conditions of this instrument shall be disregarded and are hereby rejected, and this instrument shall constitute the entire agreement between McKinney and the Purchaser. In the event that McKinney does not enforce or require strict performance of any term or condition hereof, or any other document, instrument or other agreement relating to goods sold, such lack of enforcement or requirement of strict performance will not waive, affect or diminish any right of McKinney to enforce or require strict performance of such term or condition in the future. PRICES All prices are subject to change without notice and are not guaranteed. All shipments will be made at prices in effect at the time of shipment. Possession of this price list does not constitute and agreement to sell. We reserve the right to correct clerical, stenographic and other obvious errors at any time. TAXES If under any law now or hereafter passed the seller is required to pay a tax on sales, or on an excise tax, the amount of these taxes will be added to the invoice value. QUOTATIONS Complete shipment of the order must be accepted by Purchaser within normal lead times. The QUOTE number must be referenced on the order. Any invoiced order that has the incorrect discount applied to it and did not have a QUOTE copy attached to the order or the QUOTE number written on the order will have a service fee of $00.00 net DEDUCTED from any sales credit issued for the difference in discount. The QUOTE is null and void if the Purchase Order does not include ALL product lines listed on the QUOTE or if the quantities for an item covered by the QUOTE deviate by 0% or more. DELIVERY Seller shall not be liable for any delay in delivery, or failure to deliver, due to any cause beyond the Seller s control, including but not limited to fires, floods, strikes, or other labor disputes, accidents to machinery, acts of sabotage, riots, precedence or priorities granted at the request or for the benefit, directly or indirectly, of the federal or any provincial government or any subdivision or agency thereof, delay in transportation or lack of transportation facilities, restrictions imposed by the federal, provincial or other governmental legislation or rules or regulations thereof. CREDIT Acceptance of orders and deliveries thereof shall at all times be subject to our approval of credit. PAYMENT TERMS Orders based on quotations for specific jobs will be invoiced at prices in effect on the date such orders are accepted. Other orders will be invoiced at prices in effect on the date of shipment. Errors and omissions are subject to correction on acknowledgement which in all circumstances supercedes all pricing shown herein. Accounts are net cash 20 days or with 2% discount for cash if paid on or before the 0th of the month following the date of invoice. A charge of $50.00 will be made for itemization. A charge of $25.00 will be made when changes are requested on itemized jobs already processed. No invoice will be rendered for less than $50.00 net. On non-standard items a 5% over or under run constitutes a complete order. TERMS OF 2% 0TH PROX., NET 20TH WILL BE ALLOWED. It is understood that McKinney may impose and charge a finance charge which is the lesser or one and one-half percent ( 2) per month of the highest rate allowed by law on any amount which becomes past due and delinquent. Additionally the Customer shall be responsible for all collection costs, court costs and reasonable attorney s fees (where allowed by law) in connection with the recovery of any delinquent amount. NOTE: PRICES PER EACH NET PRODUCT WEIGHT INFORMATION Weights indicated throughout this price list are approximate for brass, bronze or stainless steel base material. Aluminum base materials weigh approximately 3 the listed weights. WARRANTY McKinney products are not designed for or intended for aftermarket modification. The warranty on McKinney products becomes void if the product is modified in any way, regardless of whether the modification causes or contributes to any alleged defect. Warranty voiding modifications include, but are not limited to, third-party electrification of nonelectric products and/or the installation of non-approved or non-mckinney components. If a McKinney product is modified it no longer meets industry certification and quality control standards applicable to the original product and is no longer a genuine McKinney product. A modified product may not be sold as a McKinney product and no McKinney trademarks or certification marks based on the original McKinney product, such as (but not limited to) U.L. or ANSI/BHMA marks, may appear anywhere on the modified product or on any packaging, literature or instructions sold with the modified product. general information s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. GEN-

general information All original McKinney packaging and literature carries McKinney trademarks and must be destroyed if the original McKinney product is modified. Portions of the product that carry a McKinney trademark or certification mark must be discarded and/or replaced by the party making the modification. U.L. and other certification testing and markings are also the responsibility of the party making the modification. The use of McKinney trademarks on modified products constitutes trademark infringement. TRADEMARKS McKINNEY is a registered trademark of McKinney Products Company. Other product brand names may be trademarks or registered trademarks of their respective owners and are mentioned for reference purpose only. SHIPMENTS Once in the hands of the Transportation Company, the Purchaser assumes the risk of loss or damage in transit. All goods are F.O.B. shipping point via the most economical routing, with carrier chosen by us. Full freight prepaid on shipments within Continental United States having a net value of $,000 or more. For shipments to Alaska and Hawaii on net orders of $,350.00 or more, freight will be pre-paid the most economical way. All shipments that exceed 08-inches in packaged length must be shipped LTL. The acknowledged ship date is based upon inventory availability. We will notify you if there is a longer lead time or a back order. We will not be responsible for paying expedited shipping expenses relating to delays or buyer back charges associated with these delays. Shipments by Air, Parcel Post, Bus or Express are F.O.B. factory with no freight allowance. There will be a $25.00 surcharge on all bus or parcel post shipments. Handling charges on UPS, Air Freight or common carrier shipments may apply. A charge of $5.00 will be made for notifying customers 24 hours in advance of a truck delivery. There will be a $25.00 charge for furnishing proof of delivery. This charge will be cancelled if delivery was not made. Orders marked WOG will be held for 0 days after being produced and then shipped unless specifically marked for shipment with another P.O. If You have chosen to participate in our WOG program. a signed agreement must be on file. Orders will be held for a maximum of thirty (30) days. After such time, if pre-paid freight minimums have not been met, orders will be shipped the most economical way at the customer's cost. All orders for WOG customers will be held with other goods unless specified on each Purchase Order. CANCELLATIONS We are unable to accept cancellations or changes on non-stock and special ordered (s/o) items once processing begins. A charge will be assessed based on manufacturing expense incurred. RETURNED GOODS No credit will be issued for returned goods unless such return is authorized. If such authorization is given by us, there will be a minimum handling charge of 45% or $50.00 which ever is greater, for stock items shipped within a 90 day period from the date of the request. CLAIMS Inspect before you sign. If there is a shortage or damage, accept shipment only after freight agent makes a damage or shortage notation on your freight bill, bill of lading, or delivery receipt. If damage or loss is evident, notify your freight agent and request inspection within 0 days of receipt of goods. Shipments are packed in approved containers. Claims must be made within 30 days of shipment and are subject to approval. Claims made after 30 days will not be honored. Our responsibility for damage, visible or concealed, ceases upon delivery to the transportation company. 5 KNUCKLE BEARINGS While TA/T4A part numbers are listed in this price book, TB/T4B are available at the same price listed. ORDERS Orders may be emailed to ORDERS@ASSAABLOYDSS-CS.COM or faxed to 877-888-2772 s Effective January, 206 GEN-2 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

McKinney and B.H.M.A. Symbols BHMA Code Base Material Ferrous (Steel) Non-Ferrous (Brass or Stainless) 600 P 632 605 3 633 606 4 638 609 5 636 60 7 637 6 9 639 62 0 64 64 0A 640 63 0B 643 66 645 68 4 646 69 5 647 620 5A 649 623 20 650 624 20A 65 625 26 652 626 26D 629 32 630 32D McKinney FINISH general information s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. GEN-3

general information McKinney and Government Symbols U.S. Description McKinney U.S.P. Prime Powder Coat for Painting P Listed U.S. 3 Bright Brass 3 Listed U.S. 4 Dull Brass 4 Listed U.S. 5 Dull Brass, Oxidized 5* 30% over 0B U.S. 7 Brass, Nickel Oxidized, Bright Relieved 7* 30% over 0B U.S. 9 Bright Bronze 9 30% over 0B U.S. 0 Dull Bronze 0 Listed U.S. 0A Antique Bronze, Oiled and Lacquered 0A Listed U.S. 0B Antique Bronze, Oiled 0B Listed U.S. Dull Bronze, Oxidized * 30% over 0B U.S. 4 Bright Nickel Plated 4 Same as 26 U.S. 5 Dull Nickel Plated 5 Same as 26D U.S. 5A Nickel Oxidized Relieved 5A* P.O.A. U.S. 20 Statuary Bronze, Light 20* 30% over 0B U.S. 20A Statuary Bronze, Dark 20A* 30% over 0B U.S. 26 Bright Chromium 26 Listed U.S. 26D Dull Chromium 26D Listed U.S. 32 Polished Stainless Steel 32 Listed U.S. 32D Dull Stainless Steel 32D Listed * Check with the factory for availability and pricing on these finishes McKinney Powder Coat es MicroShield Agion Antimicrobial 32DBIO Add $2.35 to price of 32D Aluminum AP Listed Bright Brass w/ Clear Powder Coat 3-C 30% over 0B Dull Brass w/ Clear Powder Coat 4-C 30% over 0B Dark Bronze Powder Coat D-3 Same as AP Black Powder Coat D-4 Same as AP Dark Oxidized Satin Bronze 0-BE 5% Less than 0B CPC or 0B over Stainless add 0% to 32D price. Every effort is made by McKINNEY to furnish finishes which do comply with the Standard, however we cannot guarantee that our finish will match other manufacturers finish. Where a special finish or a matched finish is required, a sample must be submitted with the order. * P.O.A. on Application Consult the factory for pricing and availability on these custom finishes. 722 or EB 30% over 0B for clear coats s Effective January, 206 GEN-4 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Options/Additions Where Not Listed No Logo Hinges supplied less McKINNEY logo (not available on LISTED Hinges) - New lead times will apply and factory may need to adjust lead times after lead time of order is originally acknowledged. Blank Hinges (No Screw Holes) Blank hinges regularly furnished without swaging (flat back) unless otherwise specified. Bulk Package, Suffix BP Consult factory for availability Special Swaging Special Swaging Add 30% to price Add 30% to price No additional charge Add 30% to price general information Add $6.50 to electrical option add for all Swing Clear Hinges CC Option- Concealed Circuit Brass, Steel or Stainless Steel Base Add 4 wires - suffix CC4 $236.30 6 wires - suffix CC6 $249.25 8 wires - suffix CC8 $274.25 0 wires - suffix CC0 $3.05 2 wires - suffix CC2 $348.0 Extra Long Leads (over 2") for CC4, QC4 $4.95 per foot Extra Long Leads (over 2") for CC6, QC6 $7.5 per foot Extra Long Leads (over 2") for CC8, QC8 $9.30 per foot Extra Long Leads (over 2") for CC0, QC0 $2.00 per foot Extra Long Leads (over 2") for CC2, QC2 $4.25 per foot CC Option- Concealed Circuit with 2 8-Gauge Wires Brass, Steel or Stainless Steel Base Add 4' Lead Add 2 wires - suffix CC2-8 $236.30 $9.25 4 wires - suffix CC4-8 $236.30 $2.25 6 wires - suffix CC6-8 $274.25 $23.75 8 wires - suffix CC8-8 $299.20 $25.30 QC Option- Electrolynx Quick Connect Concealed Circuit Brass, Steel or Stainless Steel Base Add 2 wires - suffix Qc2 $224.30 4 wires - suffix QC4 $26.80 6 wires - suffix QC6 $274.30 8 wires - suffix QC8 $299.20 0 wires - suffix QC0 $336.60 2 wires - suffix QC2 $373.80 Extra 6" Pigtail for QC Butt Hinge Add 0977 QC2 Pigtail $5.00 0976 QC4 Pigtail $7.5 0975 QC8 Pigtail $9.30 MG 6 Mortar Guard ( #63333) $9.00 each s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. GEN-5

general information Options/Additions Where Not Listed PoE Option - Power over Ethernet Available on 4 2" and 5" height hinges only Add Brass or Steel Base $593.00 MM Option - Magnetic Monitoring Add Magnetic Monitoring - suffix MM $208.00 Extra Heavy Magnetic Monitoring - suffix EHM $229.00 MM Magnet Assembly Only $33.65 EHM Magnet Assembly Only $34.70 MM Magnet Assembly & Switch $58.95 EHM Magnet Assembly & Switch $64.70 Non Removable Door Suffix NRD Moderne Hinge only (2 Knuckle) One NRD provided per set of 3 hinges Non Removable Pins Set screw in barrel suffix (NRP NRP SET SCS ONLY $.50 EA NO DISC) Raised Barrel Full Mortise Hinges Bearing Hinges Only Raised barrel prefix RB 4 2" x 4 2" Standard and Heavy Weight. 5" x 4 2" Heavy Weight Only. Hinges are NRP and reversible for handing Round Corner Prefix RC Add $ 8.45 per door Add $5.5 each Add $27.40 each 4" round corner full mortise only Add $3.60 each 5 32" round corner full mortise 4 2" or larger Add $3.60 each Round corner hinges (RC) will be furnished in 4" radius unless otherwise specified Replacement steel pins standard weight Replacement steel pins heavy weight Beveled Hinges (where doors are beveled on hinge side specify as follows) For 2 knuckle and 3 knuckle hinges use 5000 series. Example TA793 or TA792 will become TA5793 or TA5792 For 2 knuckle and 5 knuckle hinges use a 4000 series. Example TA274 or T4A3386 will become a TA474 or T4A4386 TA273 will become a TA473, A TA3350 becomes a TA4350 Safety Stud Featured Suffix SSF Prison Safety Feature Suffix PSF (available HTA386 (32D) only) Slip in Hinges Suffix SIH Type I (Handed), SIH Type II Regular weight bearing hinge only (Indicate hand when ordering) Add $.8 each Add $.65 each If a part # is not shown in price book for Beveled Edge Hinge, add 0% to the price of Square Edge Hinge Add $5.35 each Add $8.25 each Add $32.75 each Special Screws ( 2" x 2-24 machine" - 4" x 2 wood) Consult factory for price and minimum requirements on additional sizes Steel Spanner Head $.5 each Brass Spanner Head $.55 each Stainless Steel Spanner Head $2.95 each Spanner bit holder tool $43.30 each Spanner bit (for use in holder) $29.50 each TORX Pin head security screws - Suffix TXS, machine screws provided. Wood screws by request only Steel Torx $.90 each net add per hinge or $.47 each Stainless Torx $2.88 each net add per hinge or $.74 each TORX bit* $30.5 each TORX bit holder tool* $43.30 each *#20-2" x 2-24 & 4" x 2 wood screw *#25-2" x 4"-20 machine screw, 2" x 2 wood screw TIPS -- Hospital Tips Prefix H Regular weight plain bearing, oil impregnated or ball Heavy weight oil impregnated or ball Solid Brass Ball Tips suffix x BT up to 6" in height Solid Brass Steeple Tips suffix x ST up to 6" in height Deco Tips for two and three knuckle suffix standard weight hinges only, where not listed, suffix RT, FT, GT, LT Architectural Hardware Presentation Folder FS86 Perforated cardboard shims # 7588 Add $6.80 each Add $6.80 each Add $6.80 each Add $6.80 each Add $6.50 each $74.50 net $0.50 per hundred s Effective January, 206 GEN-6 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Index 45 SH-2 452 SH-2 453 SH-2 00 SH-2 400 SP- 44 SP- 458 SP- 502, 502R SH- 522 SH- 552 SH- 572 SH-2 300 SH-3 4007-MRB SH-4 4007RB SH-4 8007 SH-4 900 SH-2 900 SH-3 BP-0 HS-3 BP- HS-3 BP-2 HS-3 CSS-9 MISC- DLS-8 MISC- DS-6 MISC- Deco Hinges DH- DH-5 78000 Series DH- DH-5 EP-5J MISC-2 ET HINGES Call for info. H8007 SH-4 HS00 SH-3 HTA386 FM-2 HTA74 FM-4 HTA786 FM-5 HTA274 FM- HTB386 FM-2 HTB786 FM-5 J300 SH-3 K-MCK-2HD CG-4 MCK-2HD CG-4 MCK-4HD CG-4 MCK-22HD CG-4 MCK-25HD CG-4 MCK-54HD CG-5 MCK-58HD CG-5 MCK-WTHD CG-4 MCK-FM300 CH-6 MCK-FM327 CH-7 MCK-FM3500 CH-8 MCK-FS30 CH-7 MCK-FS302 CH-8 MCK-FS309 CH-8 MCK-FS32 CH-8 MCK-FS350 CH-8 MCK-FS3502 CH-9 MCK-FM3700 CH-9 MCK-FS370 CH-9 MCK-FS3702 CH-9 MCK-HG305 CH-6 MCK-HG306 CH-7 MCK-HG30 CH-8 MCK-HG3 MCK-HG35 MCK-HG322 MCK-HG323 MCK-HG326 MCK-HG3505 MCK-HM304 MCK-HS303 MCK-HS3703 MG-6 MP79 MPB79 MPS60 MPB68 MPB9 MPB99 MPS60 MPS679 PH-4 SP3786 SP3386 SQ333 T234 T274 T2772 T2774 TA34 TA37 TA372 TA374 TA38 TA382 TA384 TA386 TA39 TA392 TA393 TA394 TA74 TA77 TA772 TA774 TA78 TA782 TA784 TA786 TA789 TA79 TA792 TA793 TA794 TA797 TA795 TA796 TA234 TA2372 TA2395 TA2398 TA274 CH-7 CH-6 CH-6 CH-6 CH-6 CH-9 CH-7 CH-7 CH-9 GEN-4 FM-24 FM-24 SH-2 FM-25 FM-25 FM-25 SH-2 SH-2 SP- SP- SP- DH-5 FM-6 FM-8 FM-9 HS-2 HM-2 FM- FS- HS- HM- FS- HS- HM- FM-2 AH- AH- AH- AH- FM-3 FM-4 FS- HS- HM- FS- HS-2 HM- HM-2 FM-5 HM-2 AH-2 AH-3 AH-3 AH-3 FS-2 FM-5 HS-2 FM-6 FM-7 HS- FM-8 FM-8 FM-9 FM-0 TA273 TA277 TA2772 TA2774 TA2798 TA2895 TA333 TA3350 TA3374 TA3383 TA3750 TA4395 TA4895 TA5392 TA5393 TA5394 TA5792 TA5793 TA5794 TA234BT TA234ST TCA234 TCA274 TCA3386 TCA3786 T4A338 T4A3382 T4A3384 T4A3386 T4A3395 T4A378 T4A3782 T4A3784 T4A3786 T4A3795 T4A3796 T4A3789 T4A4795 T4B3386 T6A3786 FM-2 FM-4 FS-2 HS-2 HM-2 FM-4 FM-5 FM-5 FM-6 FM-7 FM-7 FM-8 HM-2 DH-5 FM-2 FM-5 FM-5, FM-24 AH-2 AH-2 AH-3 AH-3 AH-4 AH-4 FM-8 FM-8 FM-7 FM-0 FM- FM-9 FM-23 FS-2 HS-3 HM-3 FM-8 FM-20 FM-20 FS-2 HS-3 HM-3 FM-2 FM-22 FM-23 HS-3 HM-3 FM-23 FM-9 FM-23 general information s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. GEN-7

general information McKinney Buy Program Codes Type Code Description 5 Knuckle Hinges 50 For all hinges 4 2" and higher 5 Knuckle Hinges 50F For all hinges 4" 5 Knuckle Hinges 50E For all hinges 3 2" Discounts for TB / T4B the same as TA / T4A T234, TA234, TCA234, T274, TA274, TCA274, TA2798, TA2895, TA333, T4A3386, TCA3386, T4A3395, TA373, T4A3786, TCA3786,T4A3795,, T4A4795, TA4895, T2774, TA2774, TCA2774, TA3374, TCA3374, T4A3384, TCA3384, T4A3784, TCA3784, TCA3789,TA2372,TCA3382, T4A3782,T4A3796,T2772, TA2772, TCA2772, T4A3382, BP0, BP, BP2, TA277, TCA277, T4A338, TCA338, T4A378, TCA378, SP3386, SP3786 MacPro Hinges 57 MP79, MPB79, MPB9, MPB68, MPB99, MPS60, MPB679 3 Knuckle Hinges 30 For all hinges 4 2" and higher 3 Knuckle Hinges 30F For all hinges 4" 3 Knuckle Hinges 30E For all hinges 3 2" TA34, TA386, TA74, TA786, TA795, TA39, TA392, TA393, TA394,, TA35392, TA5393, TA5394, TA79, TA792, TA793, TA794, TA5792, TA5793, TA5794, TA374, TA384, TA774, TA784, TA789, TA372, TA382, TA772, TA782, TA796, TA37, TA38, TA77,TA78, Electric Hinges 5 Knuckle 59 3 Knuckle 39 2 Knuckle 29 Aluminun Continuous Gear 89 Stainless Continuous 83 Hinges that are NRP as a Standard Do not add NRP as these hinges come NRP All Swing Clear (hinges ending in 89, 9, 95, 96, for instance TA789, TA79, TA2895, T4A3796) Anchor Hinge Sets (for instance TA39, TA382, TA5392, TA792 etc) 2 Mortise Hinges ending in 74 or 84 (for example TA2374 or T4A3384) 2 Surface Hinges ending in 72 or 82 (for example TA2372 or T4A3382) Do not add NRP as these hinges have a knurled hollow pin and are 'nonremovable' by design. Electric Hinges & Wire Harness Products 79 QC-C300 thru QC-C500, QC-C300P thru QC-C500P, QCR00, QC-R002, QC-R003, QC-RF2, QC-RF4, QCR-F8, QC-RM2, QC-RM4, QC-RM8, QC-FT2024, QC-FT2630, QC-MT2024, QC-MT2630, QC-DCC, TSBC-CXL, TSB-C, EPT, EPTL, EL-EPT, EL-EPTL, Po-EC206P thru PoE-C500P 2 Knuckle Hinges 20 For all hinges 4 2" and higher 2 Knuckle Hinges 20F For all hinges 4" 2 Knuckle Hinges 20E For all hinges 3 2" TA273, TA333, TA3350, TA3750, SQ333, TA3383 Spring Hinges 502, 522, 532, 572, 500 7 For 4 2" 502, 572, 500 7F For 4" Double Acting or Pivots 72 00, 45, 452, 453, 900, 900, HS00, 300, J300, 4007RB, 4007MRB, 8007 s for Spring Hinges 73 Rescue Hardware & Center Hung Pivot & PH4 CSS-9, DS-6, DLS-8, EP-5J, PH-4 Residential Grade Hinges 4 400, 44, 458 Aluminum Continuous Hinges 80 2HD, 200HD K-2HD, 4HD, 22HD, 25HD, 28HD, 54HD, 58HD Stainless Continuous Hinges 83 FM300, HG305, HG35, HG322, HG323, HG326, FM327, HM304, HG306, HG3, FS30, HS303, FS302, FS309, FS32, HG30, FM3500, FS350, FS33502, HG3505 Steel Continuous Hinges 87 FM3700, FS370, FS3702, HS3703, Miscellaneous 0 Discount unless noted on Buy Program s Effective January, 206 GEN-8 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Standard Weight Three Knuckle Non-Ferrous Bearings TA34 Code 30 FULL MORTISE HINGES 3 2" x 3 2" 88.90 mm x 88.90 mm 4" x 4" 0.60 mm x 0.60 mm 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4 2" 4.30 mm x 4.30 mm 6933 P 66.78 6934 AP 7.36 69322 3 7.36 6935 4 7.36 6936 0 7.36 69325 0A 7.36 6937 0B 8.86 69320 26 7.36 6932 26D 7.36 69323 32D 66.78 69328 P 72.4 69329 AP 8.26 73709 3 8.26 69330 4 8.26 6933 0 8.26 69340 0A 8.26 69332 0B 93.22 7374 26 8.26 69327 26D 8.26 69338 32D 72.4 69343 P 77.56 69344 AP 87.04 69352 3 87.04 69345 4 87.04 69346 0 87.04 6934 0A 87.04 69347 0B 97.88 69350 26 87.04 69342 26D 77.92 69354 32 87.04 69353 32D 4.38 3 48 33 3 48 46 3 48 53 56402 32D-NRP 46.38 3 48 53 69358 P 66.73 69359 AP 77.56 69367 3 77.56 69360 4 77.56 6936 0 77.56 69355 0A 77.56 69362 0B 87.36 69365 26 77.56 69357 26D 77.56 69369 32 77.56 69368 32D 4.38 3 48 57 4 2" x 4 2" 4.30 mm x 4.30 mm NRP 5" x 4" 27 mm x 0.60 mm 5" x 4 2" 27 mm x 4.30 mm 5" x 5" 27 mm x 27 mm 69370 0-NRP 82.8 6937 26D-NRP 82.8 69356 32D-NRP 46.38 73882 P 9.20 73883 AP 25.48 73884 3 25.48 73885 4 25.48 73886 0 25.48 73887 0A 25.48 73888 0B 43.94 73889 26 25.48 73880 26D 25.48 73890 32 25.48 7388 32D 06.24 69373 P 03.82 69374 AP 9.20 69382 3 9.20 69375 4 9.20 69376 0 9.20 69385 0A 9.20 69377 0B 36.74 69380 26 9.20 69372 26D 9.20 69383 32D 55.74 69384 32 08.4 69388 P 03.82 69389 AP 08.40 69397 3 08.40 69390 4 08.40 6939 0 08.40 69386 0A 08.40 69392 0B 24.34 69395 26 08.40 69387 26D 08.40 69399 32 9.20 69398 32D 03.82 3 48 57 3 24 33 3 24 36 3 24 36 s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-

FULL MORTISE HINGES Heavy Weight Three Knuckle TA386 Code 30 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4 2" 4.30 mm x 4.30 mm 4 2" x 4 2" 4.30 mm x 4.30 mm 5" x 4 2" 27 mm x 4.30 mm 5" x 4 2" 27 mm x 4.30 mm (NRP) 69396 32D-NRP 74. 3 24 37 69403 P 02.69 69404 AP 9.20 6942 3 9.20 69405 4 9.20 69406 0 9.20 6946 0A 9.20 3 24 36 69407 0B 29.00 6940 26 9.20 69402 26D 9.20 6944 32 9.20 6943 32D 69. 69400 26D-NRP 24.45 6945 32D-NRP 74. 3 24 36 6948 P 78.65 6949 AP 98.68 69427 3 98.68 69420 4 98.68 6942 0 98.68 6943 0A 98.68 3 24 4 69422 0B 227.89 69425 26 98.68 6947 26D 98.68 69429 32 98.68 69428 32D 78.9 69430 26D-NRP 203.93 74956 32D-NRP 82.86 3 24 4 5" x 5" 27 mm x 27 mm 6" x 6" 52.4 mm x 52.4 mm 69433 P 78.65 69434 AP 98.68 69442 3 98.68 69435 4 98.68 69436 0 98.68 69445 0A 98.68 69437 0B 227.89 69440 26 98.68 69432 26D 98.68 69444 32 98.68 69443 32D 78.65 69448 P 3.0 69449 AP 3.0 69457 3 3.0 69450 4 3.0 6945 0 304.9 69460 0A 304.9 69452 0B 349.75 69455 26 3.0 69447 26D 3.0 69459 32 3.0 69458 32D 300.7 Hospital Tip Heavy Weight Three Knuckle Non-Ferrous Bearings 3 24 45 3 8 74 TA386 Code 30 4 2" x 6" 4.30 mm x 52.40 mm 32D 45.60 3 24 60 Stainless Steel Institutional Hinges HTA386 Code 30 4 2" x 4 2" 4.30 mm x 4.30 mm HTA386 x PSF Code 30 Packed with 2 " x 2-24 Torx Pin Head Security Machine Screw 8306 32D 87.63 3 24 37 8535 32D 03.69 3 24 40 HTB386 MSP Set Code 30 Option A includes three hinges with hospital tips. Top and bottom hinges supplied with PSF and SSF, middle hinge is not. $324.93 set Option B - QC8 includes three hinges with hospital tips. Top and bottom hinges supplied with PSF and SSF, middle hinge is provided with QC and no PSF of SSF. $65.43 QC8 $687.93 QC2 s Effective January, 206 FM-2 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Steel Standard Weight Three Knuckle Bearing TA74 Code 30 3 2" x 3 2" 88.90 mm x 88.90 mm 4" x 4" 0.60 mm x 0.60 mm 6978 P 7.06 6979 AP 25.92 6987 3 25.92 6980 4 25.92 698 0 25.92 6990 0A 25.92 6982 0B 29.73 6988 5 2.43 6985 26 25.92 6977 26D 2.43 6993 P 8.08 6994 AP 26.55 69202 3 26.55 6995 4 26.55 6996 0 26.55 699 0A 26.55 6997 0B 30.45 69200 26 26.55 6992 26D 4.54 3 48 3 3 48 42 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4 2" 4.30 mm x 4.30 mm 4 2" x 4 2" 4.30 mm x 4.30 mm (NRP) 69208 P 2.44 69209 AP 29.07 6927 3 25.9 6920 4 28.50 692 0 25.9 6976 0A 25.9 3 48 5 6922 0B 29.72 6925 26 25.9 69207 26D 5.68 69206 D3 29.07 6922 D4 28.50 7420 26D-NRP 20.68 3 48 5 69223 P 2.67 69224 AP 25.62 69232 3 8.40 69225 4 8.40 69226 0 8.40 69236 0A 8.40 69227 0B 2. 3 48 55 69228 5 4.93 69230 26 8.40 69222 26D 4.93 69250 D3 25.62 6922 D4 25.62 69235 P-NRP 8.8 74283 26D-NRP 9.93 6925 3-NRP 24.02 3 48 55 74200 0-NRP 23.92 74282 0B-NRP 26.79 FULL MORTISE HINGES Hospital Tip Steel Standard Weight Three Knuckle Bearing TA74 Code 30 5" x 4 2" 27 mm x 4.30 mm 5" x 5" 27 mm x 27 mm HTA74 Code 30 4 2" x 4 2" 4.30 mm x 4.30 mm 69238 P 35.24 69239 AP 45.34 69247 3 40.4 69240 4 45.34 6924 0 45.34 693 0A 45.34 69242 0B 52.02 69245 26 32.55 69237 26D 23.98 69253 P 47.83 69254 AP 57.0 69262 3 57.0 69255 4 57.0 69256 0 57.0 69326 0A 57.0 69257 0B 65.39 69260 26 55.89 69252 26D 45.46 3 24 32 3 24 34 69233 26D 34.92 3 48 55 Steel Standard Weight Three Knuckle Bearing Wide Throw TA74 Code 30 4 2" x 6" 4.30 mm x 52.4 mm 74356 P 0.94 74357 AP 0.94 74358 3 0.94 74359 4 0.94 74360 0 0.94 7437 0B 6.92 74372 26 0.94 74373 26D 9.64 74374 D3 0.94 74375 D4 0.94 3 24 39 s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-3

FULL MORTISE HINGES Steel Heavy Weight Three Knuckle Bearing TA786 Code 30 Steel Heavy Weight Three Knuckle Hospital Tip HTA786 Code 30 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4 2" 4.30 mm x 4.30 mm 4 2" x 4 2"-NRP 4.30 mm x 4.30 mm 5" x 4 2" 27 mm x 4.30 mm 5" x 5" 27 mm x 27 mm 6" x 6"* 52.40 mm x 52.40 mm 56400 26D 44.52 5640 26D-NRP 49.52 69268 P 46.52 69269 AP 68.57 69277 3 68.57 69270 4 68.57 6927 0 39.80 75282 0A 68.57 69272 0B 78.37 69276 5 34.0 69275 26 39.80 69267 26D 34.0 69280 P-NRP 5.78 6928 0B-NRP 83.52 75240 26D-NRP 39.0 69283 P 54.73 69284 AP 77.06 69292 3 77.06 69285 4 77.06 69286 0 77.06 75283 0A 77.06 69287 0B 90.55 69290 26 77.06 69282 26D 38.65 69298 P 63.86 69299 AP 95.9 69307 3 95.9 69300 4 95.9 6930 0 95.9 75284 0A 95.9 69302 0B 09.9 69305 26 95.9 69297 26D 38.65 753 P 78.59 7532 AP 78.59 7536 3 78.59 7537 4 78.59 7539 0 78.59 75327 0A 78.59 75320 0B 204.86 75323 26 78.59 75324 26D 68.29 * For 6" x 4½" or 6" x 5" use price of 6" x 6" 3 24 37 3 24 37 3 24 37 3 24 39 3 24 42 3 8 62 4 2" x 4 2" 4.30 mm x 4.30 mm 5" x 4 2" 27 mm x 4.30 mm Hinges are packed with 2" x 2-24 Torx Pin Head Machine Screws. Steel Swing Clear Heavy Weight 3 Knuckle Bearing Reversible TA795 Code 30 4 2" 4.30 mm 5" 27 mm 75242 P 63.66 75232 26D 5.83 75244 26D x PSF 70.43 75468 P 8.77 75469 AP 8.77 75470 3 8.77 7547 4 8.77 75472 0 8.77 75473 0A 8.77 75474 0B 208.50 75475 26 8.77 75476 26D 29.96 75368 P 8.77 75369 AP 8.77 75373 3 8.77 75374 4 8.77 75376 0 8.77 75384 0A 8.77 75377 0B 208.50 75380 26 8.77 7538 26D 26.53 3 24 35 75233 26D 56.56 3 24 35 3 24 57 3 24 57 For swing clear heavy weight three knuckle bearing, beveled edge application orderta5795. (Hinges are reversible and non-handed.) s Effective January, 206 FM-4 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Non-Ferrous Standard Weight 5 Knuckle T234 Code 50 3 2" x 3 2" 88.90 mm x 88.90 mm 4" x 4" 0.60 mm x 0.60 mm 4 2" x 4" 4.30 mm x 0.60 mm 58822 P 39.48 59597 3 39.48 58823 4 39.48 59596 0 39.48 58839 0A 39.48 58836 0B 45.29 58826 26 39.48 59595 26D 39.48 58844 32 39.48 58845 32D 27.57 59645 P 34.74 5965 3 4.22 59647 4 4.22 59653 0 4.22 59665 0A 4.22 59646 0B 42.99 59655 26 4.22 59657 26D 4.22 59662 32 4.22 5966 32D 3.58 59736 P 39.89 5899 3 44.37 58920 4 44.37 59730 0 44.37 59740 0A 44.37 59733 0B 50.90 58924 26 44.37 59732 26D 44.37 58875 32 44.37 58876 32D 39.89 2 48 35 3 48 44 3 48 47 4 2" x 4 2" 4.30 mm x 4.30 mm 4 2" x 4 2"-NRP 4.30 mm x 4.30 mm 5" x 4 2" 27 mm x 4.30 mm 5" x 5" 27 mm x 27 mm Non-Ferrous Standard Weight 5 Knuckle Bearing TA234 Code 50 3 2" x 3 2" 88.90 mm x 88.90 mm 6020 P 4.42 602 3 48.5 6022 4 48.5 604 0 48.5 606 0A 48.5 605 0B 55.22 596 26 48.5 59630 26D 48.5 609 32 48.5 6026 32D 4.42 3 48 33 4" x 4" 0.60 mm x 0.60 mm 4 2" x 4" 4.30 mm x 0.60 mm 59785 P 37.9 5979 3 4.68 59787 4 4.68 59789 9 4.68 59793 0 4.68 59803 0A 4.68 58972 0B 43.47 59795 26 37.89 59797 26D 4.68 58963 32 4.68 58964 32D 33.8 59804 0B-NRP 48.52 59784 26D-NRP 46.83 58965 32D-NRP 38.8 58989 P 68.76 58990 3 73.25 5899 4 73.25 59880 0 73.25 58998 0A 73.25 59879 0B 84.02 58995 26 73.25 59882 26D 73.25 59006 32 73.25 59007 32D 68.76 59948 P 7.37 5994 3 75.86 59944 4 75.86 59943 0 75.86 59947 0A 75.86 59946 0B 87.0 59945 26 75.86 59940 26D 75.86 599 32 75.86 5992 32D 7.37 3 48 52 3 48 52 3 24 33 3 24 35 59675 P 42.24 5968 3 49.27 59677 4 49.27 59683 0 49.27 59682 0A 49.27 59680 0B 5.37 3 48 46 59685 26 49.27 59687 26D 49.27 59676 32 49.27 59678 32D 38.40 59750 P 45.52 59754 3 54.03 59759 4 54.03 59745 0 54.03 59753 0A 54.03 59746 0B 56.35 3 48 53 59757 26 54.03 59747 26D 49.2 5975 32 54.03 59752 32D 4.38 Continued on next page FULL MORTISE HINGES s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-5

FULL MORTISE HINGES Continued TA234 Code 50 Non-Ferrous Standard Weight 5 Knuckle Bearing 4 2" x 4"-NRP 4.30 mm x 0.60 mm 4 2" x 4 2" 4.30 mm x 4.30 mm 4 2" x 4 2" 4.30 mm x 4.30 mm 5" x 4" 27 mm x 0.60 mm 59755 26D-NRP 54.2 59756 32D-NRP 46.38 5974 0B-NRP 6.50 59820 P 45.52 59826 3 48.52 59822 4 48.52 59824 9 53.37 59828 0 49.90 59829 0A 53.37 59839 0B 6.20 59830 26 53.37 59832 26D 45.46 59823 32 48.52 59838 32D 4.38 5982 P-NRP 46.38 59844 3-NRP 53.52 59835 0-NRP 58.87 7600 0B-NRP 66.35 59837 26D-NRP 50.96 59840 32D-NRP 46.38 59989 P 73.5 5999 3 78.00 59992 4 78.00 59993 0 78.00 59994 0A 78.00 59995 0B 89.47 59996 26 78.00 59997 26D 78.00 59998 32 78.00 59999 32D 73.5 3 48 53 3 48 57 3 48 57 3 24 33 5" x 4 2" 27 mm x 4.30 mm 5" x 4 2"-NRP 27 mm x 4.30 mm 5" x 5" 27 mm x 27 mm 6" x 6" 52.40 mm x 52.40 mm 6003 P 55.74 6004 3 6.92 6005 4 6.92 59900 0 6.92 59907 0A 6.92 59906 0B 64.57 3 24 36 6009 26 6.92 59902 26D 6.92 5990 32 6.92 59904 32D 50.67 59905 26D-NRP 55.82 5990 32D-NRP 55.67 3 24 36 599 0B-NRP 76.8 59965 P 82.06 5997 3 86.55 59967 4 86.55 59973 0 86.55 59972 0A 86.55 59966 0B 90.25 3 24 38 59975 26 86.55 59977 26D 86.55 59983 32 86.55 59984 32D 82.06 672 P 33.49 673 3 33.49 674 4 33.49 667 0 33.49 67 0A 33.49 3 8 43 668 0B 53. 678 26 33.49 679 26D 23.39 68 32D $24.99 3 8 45 Non-Ferrous Standard Weight 5 Knuckle Concealed Bearing TCA234 Code 50 4 2" x 4 2" 4.30 mm x 4.30 mm 68970 P 59.44 68978 3 76.90 68972 4 76.90 68973 0 76.90 68969 0A 76.90 68974 0B 88.2 6898 26 76.90 68976 26D 76.90 68982 32 76.90 68983 32D 59.44 3 48 57 5" x 5" 27 mm x 27 mm 68990 P 89.22 68998 3 93.7 68992 4 93.7 68993 0 93.7 68989 0A 93.7 68994 0B 07.49 6900 26 93.7 68996 26D 93.7 69002 32 93.7 69003 32D 89.22 3 24 38 s Effective January, 206 FM-6 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Non-Ferrous Standard Weight Five Knuckle Ball Tip TA234BT Code 50 Non-Ferrous Standard Weight 5 Knuckle Concealed Bearing Non-Ferrous Swing Clear Standard Weight TA2395 Code 50 FULL MORTISE HINGES 4 2" x 4 2" 4.30 mm x 4.30 mm 5988 3 65.32 3 48 59 4 2" 4.30 mm 56985 32D 23.62 3 24 40 5" 73585 32D 27.29 27 mm TA4395 3 24 40 73584 32D 27.29 Hinges are NRP and Reversible. Non-Ferrous Standard Weight Five Knuckle Steeple Tip TA234ST Code 50 4 2" x 4 2" 4.30 mm x 4.30 mm 5986 3 65.32 3 48 59 Steel Standard Weight 5 Knuckle T274 Code 50 62624 32D 90.54 62620 26D 200.64 Non-Ferrous Standard Weight Five Knuckle Wide Throw TA2398 Code 50 4 2" x 6" 4.30 mm x 52.40 mm 4 2" x 8" 4.30 mm x 203.20 mm 4" x 4" 0.60 mm x 0.60 mm 3 2" x 3 2" 5535 P 2.79 88.90 mm x 88.90 mm 55335 AP 8.2 4 2" x 4" 5537 3 7.46 4.30 mm x 0.60 mm 55337 4 7.46 5532 0 7.46 55330 0A 8.2 2 48 3 55333 0B 8.55 5534 5 6.08 55327 26 7.46 4" x 4" 5539 26D 6.08 55485 P 4.08 0.60 mm x 0.60 mm 55505 AP 8.43 5549 3 7.66 3 48 4 55487 4 7.66 4 2" x 4" 55493 0 8.43 4.30 mm x 0.60 mm Continued (NRP) 3 24 42 32D 206.66 3 24 45 555 0A 8.43 55496 0B 8.79 55497 5 6.5 3 48 4 55499 26 7.66 5550 26D 6.5 55635 P 5.65 5564 AP 3.0 55646 3.9 55648 4.9 55637 0 3.0 55638 0A 3.0 55644 0B 4.08 3 48 50 55656 5 8.52 55655 26.9 55639 26D 8.52 55652 D3 3.0 55653 D4 3.0 55645 P-NRP 0.80 55657 26D-NRP 3.67 3 48 50 Continued on next page s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-7

FULL MORTISE HINGES Steel Standard Weight 5 Knuckle Continued T274 Code 50 4 2" x 4 2" 4.30 mm x 4.30 mm 4 2" x 4 2" 4.30 mm x 4.30 mm (NRP) 55745 P 5.65 55759 AP.26 5577 3 0.24 55767 4 0.24 55769 9.26 55774 0 0.24 55762 0A 0.24 55742 0B.75 55742E 0BE 8.70 5575 5 8. 55753 26 0.24 55755 26D 8. 55782 D3.26 55783 D4.26 55747 P-NRP 0.65 55754 AP-NRP 6.4 55750 3-NRP 6.76 55768 4-NRP 5.39 55792 0-NRP 5.39 55752 0B-NRP 6.90 55766 26-NRP 5.39 55778 26D-NRP 3. 3 48 54 3 48 54 5" x 4 2" 27 mm x 4.30 mm 5" x 5" 27 mm x 27 mm 55968 P 8.39 55974 AP 30.5 55988 3 30.5 70044 4 30.5 55970 0 30.5 5597 0A 30.5 70046 0B 35.00 55984 5 8.76 70049 26 30.5 55972 26D 8.76 55973 D3 30.5 55982 D4 30.5 56080 P 27.9 56090 AP 37.76 56082 3 37.76 70057 4 37.76 56086 0 37.76 70064 0A 37.76 70059 0B 43.32 70062 26 37.76 56084 26D 3.72 70065 D3 37.76 70066 D4 37.76 3 24 3 3 24 34 Steel Standard Weight 5 Knuckle Bearing TA274 Code 50 3 2" x 3 2" 88.90 mm x 88.90 mm 4" x 4" 0.60 mm x 0.60 mm 55385 P 0.24 55399 AP 7.23 5539 3 5.66 55387 4 7.23 55395 0 5.66 5540 0A 7.23 55389 0B 7.96 55402 26 7.23 55393 26D 2.43 55392 5 2.43 55555 P.53 55575 AP 23.85 5556 3 6.68 55557 4 8.35 55563 0 6.68 55554 0A 8.35 55577 0B 9.3 55569 26 6.68 5557 26D 4.25 55567 5 4.25 3 48 3 3 48 42 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4" 4.30 mm x 0.60 mm (NRP) 55675 P 2.67 55677 AP 20.24 55683 3 8.40 55674 4 8.40 5568 0 8.40 55673 0A 8.40 5569 0B 2. 5569E 0BE 7.20 5566 5 5.68 55688 26 8.40 55679 26D 5.68 55587 D3 20.24 55588 D4 20.24 55693 P-NRP 7.82 55690 26D-NRP 20.68 55682 0A-NRP 23.55 55689 0B-NRP 26.26 3 48 5 3 48 5 Continued on next page s Effective January, 206 FM-8 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Steel Standard Weight 5 Knuckle Bearing Continued TA274 Code 50 FULL MORTISE HINGES 4 2" x 4 2" 4.30 mm x 4.30 mm 4 2" x 4 2" 4.30 mm x 4.30 mm (NRP) 5" x 4" 27 mm x 0.60 mm Steel Standard Weight 5 Knuckle Concealed Bearing TCA274 Code 50 55820 P 2.67 55866 AP 20.24 55846 3 8.40 55842 4 8.40 55844 9 8.40 55848 0 8.40 55847 0A 8.40 55862 0B 2. 55862E 0BE 5.64 55854 5 4.93 55856 26 8.40 55858 26D 4.93 55809 D3 20.24 5580 D4 8.40 55822 P-NRP 7.67 55868 AP-NRP 25.39 55853 3-NRP 23.55 55834 4-NRP 23.55 5586 9-NRP 23.55 55850 0-NRP 23.55 5585 0A-NRP 25.74 55875 0B-NRP 26. 55875E 0BE-NRP 20.79 55870 26-NRP 23.40 55860 26D-NRP 9.93 5584 D3-NRP 23.55 5582 D4-NRP 23.55 55963 P 28.37 55995 AP 36.06 55996 3 36.06 55997 4 36.06 55964 0 36.06 55966 26 36.06 55962 26D 27.83 3 48 55 3 48 55 3 24 29 5" x 4 2" 27 mm x 4.30 mm 5" x 4 2" 27 mm x 4.30 mm (NRP) 5" x 5" 27 mm x 27 mm 6" x 6" 52.4 mm x 52.4 mm 5600 P 2.7 56024 AP 35.8 560 3 35.8 5603 4 35.8 5604 0 32.55 56036 0A 35.8 56026 0B 37.33 5608 26 32.55 56020 26D 23.98 5602 P-NRP 26.32 56030 26D-NRP 25.29 5620 P 37.87 5622 P-NRP 43.02 5653 AP 45.75 5639 3 4.59 5635 4 4.59 564 0 45.75 5648 0A 45.75 5655 0B 47.70 5647 26 4.59 5649 26D 37.5 56232 P 94.24 56249 AP 94.24 56239 3 94.24 56240 4 94.24 56243 0 94.24 56252 0A 94.24 56244 0B 08.0 56247 26 94.24 56248 26D 84.4 3 24 32 3 24 34 3 24 34 3 8 55 4 2" x 4" 4.30 mm x 0.60 mm 67200 P 23.50 6720 AP 34.25 67208 3 34.25 67202 4 34.25 67203 0 34.25 6726 0A 34.25 67204 0B 39.29 6720 5 24.99 672 26 34.25 67206 26D 24.99 6723 D3 34.25 6724 D4 34.25 3 48 5 4 2" x 4 2" 4.30 mm x 4.30 mm 67220 P 9.55 6722 AP 26.50 67228 3 26.50 67222 4 26.50 67223 0 26.50 67235 0A 26.50 67224 0B 30.40 3 48 55 67230 5 20.0 6723 26 26.50 67226 26D 20.0 67233 D3 26.50 67234 D4 26.50 Continued on next page s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-9

FULL MORTISE HINGES Steel Standard Weight 5 Knuckle Concealed Bearing Continued TCA274 Code 50 5" x 4 2" 27 mm x 4.30 mm Steel Standard Weight 5 Knuckle Hospital Tip Bearing HTA274 Code 50 67240 P 4.25 6724 AP 52.05 67248 3 52.05 67242 4 52.05 67243 0 52.05 67255 0A 52.05 67244 0B 59.7 67245 5 40.6 6725 26 52.05 67246 26D 40.6 67253 D3 52.05 67254 D4 52.05 3 24 32 5" x 5" 27 mm x 27 mm 4 2" x 4 2" 4.30 mm x 4.30 mm 67260 P 40.3 6726 AP 52.05 67268 3 52.05 67262 4 52.05 67263 0 52.05 67275 0A 52.05 67264 0B 59.7 67265 5 40.6 6727 26 52.05 67266 26D 44.67 67273 D3 52.05 67274 D4 52.05 5582 P 29.47 55859 26D 3.73 3 24 32 3 48 55 Steel Standard Weight 2 Knuckle Bearing TA273 Code 20 3 2" x 3 2" 88.90 mm x 88.90 mm R.H. 65450 P 5.23 L.H. 6545 P 5.23 R.H. 65463 AP 7.45 L.H. 65464 AP 7.45 R.H. 65477 3 7.45 L.H. 65478 3 7.45 R.H. 65452 4 7.45 L.H. 65453 4 7.45 R.H. 65454 0 7.45 3 48 3 3 2" x 3 2" 88.90 mm x 88.90 mm L.H. 65455 0 7.45 R.H. 65467 0A 7.45 L.H. 65468 0A 7.45 R.H. 65475 0B 2.58 L.H. 65476 0B 2.58 R.H. 65483 26 7.45 L.H. 65484 26 7.45 R.H. 65458 26D 5.23 L.H. 65459 26D 5.23 R.H. 65487 D3 7.45 L.H. 65488 D3 7.45 R.H. 65489 D4 7.45 L.H. 65490 D4 7.45 3 48 3 Continued on next page s Effective January, 206 FM-0 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Steel Standard Weight 2 Knuckle Bearing Continued TA273 Code 20 FULL MORTISE HINGES 4" x 4" 0.60 mm x 0.60 mm R.H. 6553 P 25.94 L.H. 6554 P 25.94 R.H. 6559 AP 37.98 L.H. 65520 AP 37.98 R.H. 65539 3 37.98 L.H. 65546 3 37.98 R.H. 6555 4 37.98 L.H. 6556 4 37.98 R.H. 65525 0 37.98 L.H. 65526 0 37.98 R.H. 65544 0A 37.98 L.H. 65545 0A 37.98 R.H. 65543 0B 43.57 L.H. 65542 0B 43.57 R.H. 6554 26 37.98 L.H. 65540 26 37.98 R.H. 6553 26D 32.33 L.H. 65532 26D 32.33 R.H. 65535 D3 37.98 L.H. 65536 D3 37.98 R.H. 65537 D4 37.98 L.H. 65538 D4 37.98 4 2" x 4" 4.30 mm x 0.60 mm R.H. 6556 P 22.23 L.H. 65562 P 22.23 R.H. 65567 AP 3.03 L.H. 65568 AP 3.03 R.H. 6559 3 3.03 L.H. 65590 3 3.03 R.H. 65563 4 3.03 L.H. 65564 4 3.03 R.H. 65573 0 3.03 L.H. 65574 0 3.03 R.H. 65559 0A 3.03 L.H. 65560 0A 3.03 R.H. 65599 0B 35.59 L.H. 65598 0B 35.59 R.H. 65594 26 3.03 L.H. 65595 26 3.03 R.H. 65579 26D 24.87 L.H. 65580 26D 24.87 R.H. 65585 D3 3.03 L.H. 65586 D3 3.03 R.H. 65587 D4 3.03 L.H. 65588 D4 3.03 3 48 39 3 48 46 4 2" x 4 2" 4.30 mm x 4.30 mm R.H. 65605 P 22.5 L.H. 65606 P 22.5 R.H. 656 AP 32.85 L.H. 6562 AP 32.85 R.H. 65632 3 32.85 L.H. 6563 3 32.85 R.H. 65607 4 32.85 L.H. 65608 4 32.85 R.H. 6567 0 32.85 L.H. 6568 0 32.85 R.H. 65640 0A 32.85 L.H. 6564 0A 32.85 R.H. 65636 0B 37.69 L.H. 65635 0B 37.69 R.H. 65634 26 32.85 L.H. 65637 26 32.85 R.H. 65623 26D 24.4 L.H. 65624 26D 24.4 R.H. 65627 D3 32.85 L.H. 65628 D3 32.85 R.H. 65629 D4 32.85 L.H. 65630 D4 32.85 5" x 4" 27 mm x 0.60 mm R.H. 65653 P 45.97 L.H. 65654 P 45.97 R.H. 65659 AP 65.04 L.H. 65660 AP 65.04 R.H. 65649 3 65.04 L.H. 65650 3 65.04 R.H. 6565 4 65.04 L.H. 65652 4 65.04 R.H. 65665 0 65.04 L.H. 65666 0 65.04 R.H. 65675 0A 65.04 L.H. 65676 0A 65.04 R.H. 65677 0B 74.60 L.H. 65678 0B 74.60 R.H. 65667 26 65.04 L.H. 65668 26 65.04 R.H. 6567 26D 55.09 L.H. 65672 26D 55.09 R.H. 65679 D3 65.04 L.H. 65680 D3 65.04 R.H. 6568 D4 65.04 L.H. 65682 D4 65.04 3 48 49 3 24 26 Continued on next page s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-

FULL MORTISE HINGES Steel Standard Weight 2 Knuckle Bearing Continued TA273 Code 20 5" x 4 2" 27 mm x 4.30 mm 5" x 5" 27 mm x 27 mm R.H. 6570 P 50.3 L.H. 65702 P 50.3 R.H. 65707 AP 60.29 L.H. 65708 AP 60.29 R.H. 65703 3 60.29 L.H. 65704 3 60.29 R.H. 65705 4 60.29 L.H. 65706 4 60.29 R.H. 6573 0 60.29 L.H. 6574 0 60.29 R.H. 65733 0A 60.29 L.H. 65734 0A 60.29 R.H. 65725 0B 69.6 L.H. 65726 0B 69.6 R.H. 6572 26 60.29 L.H. 65722 26 60.29 R.H. 6579 26D 55.09 L.H. 65720 26D 55.09 R.H. 65729 D3 60.29 L.H. 65730 D3 60.29 R.H. 6573 D4 60.29 L.H. 65732 D4 60.29 3 24 29 R.H. 65749 P 6.54 L.H. 65750 P 6.54 R.H. 65755 AP 69.20 L.H. 65756 AP 69.20 R.H. 65743 3 69.20 L.H. 65744 3 69.20 R.H. 65745 4 69.20 L.H. 65746 4 69.20 R.H. 6576 0 69.20 L.H. 65762 0 69.20 R.H. 6577 0A 69.20 L.H. 65772 0A 69.20 R.H. 65769 0B 79.38 L.H. 65770 0B 79.38 R.H. 65759 26 69.20 L.H. 65760 26 69.20 R.H. 65767 26D 65.04 L.H. 65768 26D 65.04 R.H. 65773 D3 69.20 L.H. 65774 D3 69.20 R.H. 65775 D4 69.20 L.H. 65776 D4 69.20 3 24 32 Steel Standard Weight Wide Throw 5 Knuckle Bearing TA2798 Code 50 3 2" x 5" 88.90 mm x 27 mm 3 2" x 6" 88.90 mm x 52.4 mm 65294 P 37.53 65305 AP 47.09 65295 3 47.09 65296 4 47.09 65299 0 47.09 65309 0A 47.09 65300 0B 54.0 65303 26 47.09 65304 26D 42.60 65323 P 39.78 65334 AP 49.34 65324 3 49.34 65325 4 49.34 65328 0 49.34 65337 0A 49.34 65329 0B 56.58 65332 26 49.34 65333 26D 44.85 3 24 24 3 24 30 4" x 6" 0.60 mm x 52.4 mm 4" x 7" 0.60 mm x 77.8 mm 4 2" x 6" 4.30 mm x 52.4 mm 65346 P 52.90 65357 AP 63.80 65347 3 63.80 65348 4 63.80 6535 0 63.80 3 24 34 65360 0A 63.80 65352 0B 73.8 65355 26 63.80 65356 26D 58.47 65378 P 52.90 65389 AP 63.80 65379 3 63.80 65380 4 63.80 65383 0 63.80 3 24 36 65392 0A 63.80 65384 0B 73.8 65387 26 63.80 65388 26D 58.47 59046 P 97.3 65404 AP 97.3 65393 3 97.3 65394 4 97.3 59054 0 97.3 3 24 39 65405 0A 97.3 65397 0B.42 65400 26 97.3 59052 26D 87.03 Continued on next page s Effective January, 206 FM-2 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

TA2798 Code 50 4 2" x 7" 0.60 mm x 77.8 mm 4 2" x 8" 4.30 mm x 203.2 mm Steel Standard Weight Wide Throw 5 Knuckle Bearing Continued 5900 P 97.3 5909 AP 97.3 59098 3 97.3 59099 4 97.3 5903 0 97.3 5906 0A 97.3 5904 0B.42 6254 26 97.3 62542 26D 87.03 62548 P 97.3 62559 AP 97.3 62549 3 97.3 62550 4 97.3 62553 0 97.3 62562 0A 97.3 62554 0B.42 62557 26 97.3 62558 26D 87.03 3 24 42 3 24 48 5" x 7" 27 mm x 77.8 mm 5" x 8" 27 mm x 203.2 mm 5957 P 5.54 62583 AP 5.54 62573 3 5.54 62574 4 5.54 62577 0 5.54 62586 0A 5.54 62578 0B 32.54 6258 26 5.54 62582 26D 05.45 62604 P 5.54 6265 AP 5.54 62605 3 5.54 62606 4 5.54 62609 0 5.54 6268 0A 5.54 6260 0B 32.54 6263 26 5.54 6264 26D 05.45 3 24 5 3 24 58 FULL MORTISE HINGES Steel Standard Weight Swing Clear 5 Knuckle Bearing TA2895 Code 50 4 2" 4.30 mm 57000 P 30.72 5700 AP 30.72 57008 3 30.72 57002 4 8.84 57003 0 30.72 56999 0A 30.72 57004 0B 36.32 570 26 8.84 57006 26D 67.9 3 24 38 TA2895 Code 50 5" 27 mm 5" 27 mm TA4895 Code 50 57030 26D 73.59 3 24 40 57049 26D 73.59 3 24 40 s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-3

FULL MORTISE HINGES Non-Ferrous Standard Weight 2 Knuckle Bearing TA333 Code 20 3 2" x 3 2" 88.90 mm x 88.90 mm R.H. 66239 P 70.8 L.H. 66240 P 70.8 R.H. 66245 AP 74.93 L.H. 66246 AP 74.93 R.H. 6627 3 74.97 L.H. 6628 3 74.97 R.H. 6629 4 74.97 L.H. 66220 4 74.97 R.H. 6624 0 74.97 L.H. 66242 0 74.97 R.H. 66237 0A 74.97 L.H. 66238 0A 74.97 R.H. 66247 0B 86.00 L.H. 66248 0B 86.00 R.H. 66227 26 74.97 L.H. 66228 26 74.97 R.H. 66243 26D 74.97 L.H. 66244 26D 74.97 4" x 4" 0.60 mm x 0.60 mm R.H. 66258 P 77.46 L.H. 66259 P 77.46 R.H. 66260 AP 84.7 L.H. 6626 AP 84.7 R.H. 6605 3 84.7 L.H. 6606 3 84.7 R.H. 70286 4 84.7 L.H. 70287 4 84.7 R.H. 66085 0 84.7 L.H. 66086 0 84.7 R.H. 66264 0A 84.7 L.H. 66265 0A 84.7 R.H. 66262 0B 97.7 L.H. 66263 0B 97.7 R.H. 6609 26 84.7 L.H. 66092 26 84.7 R.H. 66097 26D 84.7 L.H. 66098 26D 84.7 4 2" x 4" 4.30 mm x 0.60 mm R.H. 66287 P 93.80 L.H. 66288 P 93.80 R.H. 66289 AP 09.29 L.H. 66290 AP 09.29 R.H. 6635 3 09.29 L.H. 6636 3 09.29 R.H. 6639 4 09.29 L.H. 66320 4 09.29 R.H. 66295 0 09.29 L.H. 66296 0 09.29 R.H. 66285 0A 09.29 L.H. 66286 0A 09.29 R.H. 6629 0B 25.37 L.H. 66292 0B 25.37 3 48 33 3 48 46 3 48 53 Continued 4 2" x 4" 4.30 mm x 0.60 mm R.H. 6630 26 09.29 L.H. 66302 26 09.29 R.H. 66307 26D 09.29 L.H. 66308 26D 09.29 R.H. 66293 32 20.23 L.H. 66294 32 20.23 R.H. 66297 32D 93.80 L.H. 66298 32D 93.80 4 2" x 4 2" 4.30 mm x 4.30 mm R.H. 66369 P 83.35 L.H. 66370 P 83.35 R.H. 66355 AP 93.80 L.H. 66356 AP 93.80 R.H. 66353 3 93.80 L.H. 66354 3 93.80 R.H. 66357 4 93.80 L.H. 66358 4 93.80 R.H. 66337 0 93.80 L.H. 66338 0 93.80 R.H. 66367 0A 93.80 L.H. 66368 0A 93.80 R.H. 6637 0B 07.60 L.H. 66372 0B 07.60 R.H. 66343 26 93.80 L.H. 66344 26 93.80 R.H. 66349 26D 93.80 L.H. 66350 26D 93.80 R.H. 66333 32 03.8 L.H. 66334 32 03.8 R.H. 66335 32D 83.35 L.H. 66336 32D 83.35 5" x 4" 27 mm x 0.60 mm R.H. 66407 P 4.7 L.H. 66408 P 4.7 R.H. 66409 AP 8.87 L.H. 6640 AP 8.87 R.H. 6647 3 8.87 L.H. 6648 3 8.87 R.H. 6649 4 8.87 L.H. 66420 4 8.87 R.H. 66379 0 8.87 L.H. 66380 0 8.87 R.H. 66405 0A 8.87 L.H. 66406 0A 8.87 R.H. 664 0B 36.34 L.H. 6642 0B 36.34 R.H. 66385 26 8.87 L.H. 66386 26 8.87 R.H. 6639 26D 8.87 L.H. 66392 26D 8.87 R.H. 6638 32 30.75 L.H. 66382 32 30.75 R.H. 66383 32D 4.7 L.H. 66384 32D 4.7 3 48 53 3 48 57 3 24 33 Continued on next page s Effective January, 206 FM-4 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Non-Ferrous Standard Weight 2 Knuckle Bearing Continued TA333 Code 20 FULL MORTISE HINGES 5" x 4 2" 27 mm x 4.30 mm 5" x 5" 27 mm x 27 mm R.H. 66455 P 4.7 L.H. 66456 P 4.7 R.H. 66457 AP 8.87 L.H. 66458 AP 8.87 R.H. 6644 3 8.87 L.H. 66442 3 8.87 R.H. 66443 4 8.87 L.H. 66444 4 8.87 R.H. 6642 0 8.87 L.H. 66422 0 8.87 R.H. 66453 0A 8.87 L.H. 66454 0A 8.87 R.H. 66459 0B 36.34 L.H. 66460 0B 36.34 R.H. 66427 26 8.87 L.H. 66428 26 8.87 R.H. 66433 26D 8.87 L.H. 66434 26D 8.87 R.H. 66423 32 30.75 L.H. 66424 32 30.75 R.H. 66425 32D 4.7 L.H. 66426 32D 4.7 3 24 36 R.H. 6649 P 34.25 L.H. 66492 P 34.25 R.H. 66493 AP 38.4 L.H. 66494 AP 38.4 R.H. 66499 3 38.4 L.H. 66500 3 38.4 R.H. 66489 4 38.4 L.H. 66490 4 38.4 R.H. 66463 0 38.4 L.H. 66464 0 38.4 R.H. 66487 0A 38.4 L.H. 66488 0A 38.4 R.H. 66495 0B 58.77 L.H. 66496 0B 58.77 R.H. 66469 26 38.4 L.H. 66470 26 38.4 R.H. 66475 26D 38.4 L.H. 66476 26D 38.4 R.H. 66465 32 52.26 L.H. 66466 32 52.26 R.H. 66467 32D 34.25 L.H. 66468 32D 34.25 3 24 38 Non-Ferrous Heavy Weight 2 Knuckle Bearing TA3350 Code 20 R.H. 66627 P 23.69 L.H. 66628 P 23.69 R.H. 66649 AP 40.28 L.H. 66650 AP 40.28 R.H. 66749 3 40.28 L.H. 66750 3 40.28 R.H. 6675 4 40.28 L.H. 66752 4 40.28 R.H. 6663 0 40.28 L.H. 66632 0 40.28 R.H. 6665 0A 40.28 3 24 37 4 2" x 4 2" 4.30 mm x 4.30 mm L.H. 66652 0A 40.28 R.H. 66629 0B 60.9 L.H. 66630 0B 60.9 R.H. 66637 26 40.28 L.H. 66638 26 40.28 R.H. 66643 26D 40.28 L.H. 66644 26D 40.28 R.H. 66633 32 54.3 L.H. 66634 32 54.3 R.H. 66639 32D 23.69 L.H. 66640 32D 23.69 3 24 37 Continued on next page s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-5

FULL MORTISE HINGES Non-Ferrous Heavy Weight 2 Knuckle Bearing Continued TA3350 Code 20 5" x 4 2" 27 mm x 4.30 mm 5" x 5" 27 mm x 27 mm R.H. 66709 P 64.0 L.H. 6670 P 64.0 R.H. 66679 AP 76.49 L.H. 66680 AP 76.49 R.H. 66737 3 76.49 L.H. 66738 3 76.49 R.H. 66739 4 76.49 L.H. 66740 4 76.49 R.H. 6666 0 76.49 L.H. 66662 0 76.49 R.H. 6673 0A 76.49 L.H. 6674 0A 76.49 R.H. 667 0B 202.45 L.H. 6672 0B 202.45 R.H. 66667 26 76.49 L.H. 66668 26 76.49 R.H. 66673 26D 76.49 L.H. 66674 26D 76.49 R.H. 66663 32 76.49 L.H. 66664 32 76.49 R.H. 66669 32D 64.0 L.H. 66670 32D 64.0 3 24 4 R.H. 66757 P 76.87 L.H. 66758 P 76.87 R.H. 66759 AP 90.33 L.H. 66760 AP 90.33 R.H. 66725 3 90.33 L.H. 66726 3 90.33 R.H. 66727 4 90.33 L.H. 66728 4 90.33 R.H. 6669 0 76.49 L.H. 66692 0 76.49 R.H. 66689 0A 76.49 L.H. 66690 0A 76.49 R.H. 6676 0B 202.45 L.H. 66762 0B 202.45 R.H. 66697 26 76.49 L.H. 66698 26 76.49 R.H. 66703 26D 76.49 L.H. 66704 26D 76.49 R.H. 66693 32 90.33 L.H. 66694 32 90.33 R.H. 66695 32D 76.87 L.H. 66696 32D 76.87 3 24 45 Non-Ferrous Heavy Weight 5 Knuckle Bearing T4A3386 Code 50 4 2" x 4 2" 4.30 mm x 4.30 mm 4 2" x 4 2" 4.30 mm x 4.30 mm (NRP) 680 P 76.02 6794 3 73.9 6790 4 73.9 6796 0 80.5 6793 0A 80.5 6795 0B 83.95 6802 26 80.5 6804 26D 73.9 679 32 73.9 6787 32D 69. 683 0-NRP 78.9 685 0B-NRP 88.95 682 26D-NRP 78.9 684 32D-NRP 74. 3 24 37 3 24 37 5" x 4 2" 27 mm x 4.30 mm 5" x 4 2" 27 mm x 4.30 mm (NRP) 6879 P 85.59 7092 3 27.6 7093 4 27.6 6862 0 27.6 6874 0A 27.6 6873 0B 45.86 6870 26 27.6 6866 26D 73.9 6903 32 73.9 6868 32D 77.36 6863 0-NRP 32.3 686 0B-NRP 37.60 6869 26D-NRP 78.34 687 32D-NRP 82.5 3 24 43 3 24 43 Continued on next page s Effective January, 206 FM-6 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Non-Ferrous Heavy Weight 5 Knuckle Bearing Continued T4A3386 Code 50 FULL MORTISE HINGES 5" x 5" 27 mm x 27 mm 6938 P 32.45 6933 3 39.89 6929 4 39.89 6935 0 39.89 6924 0A 39.89 6930 0B 60.47 694 26 39.89 6943 26D 39.89 6926 32 39.89 6928 32D 32.45 3 24 47 6" x 5" 52.4 mm x 27 mm 68832 P 234.66 68833 3 234.66 68834 4 234.66 68827 0 234.66 6884 0A 234.66 68828 0B 269.8 68838 26 234.66 68839 26D 234.66 68823 32 224.57 68824 32D 204.00 3 8 43 Non-Ferrous Heavy Weight 5 Knuckle Bearing T4B3386 Code 50 TCA3386 Code 50 6" x 6" 52.4 mm x 52.4 mm T6B3386 Code 50 8" x 8" 203.2 mm x 203.2 mm 6462 P 234.66 6463 3 234.66 6464 4 234.66 64602 0 234.66 64620 0A 234.66 64607 0B 269.8 6467 26 234.66 6468 26D 234.66 64603 32 234.66 64604 32D 224.57 69060 32D 366.85 6906 32 376.79 3 8 74 3 2 66 4 2" x 4 2" 4.30 mm x 4.30 mm 5" x 4 2" 27 mm x 4.30 mm 5" x 5" 27 mm x 27 mm Wide throw not available in TCA Series 6836 P 0.46 6838 3 4.95 6834 4 4.95 6839 0 4.95 6840 0A 4.95 684 0B 3.86 6842 26 4.95 6832 26D 4.95 6843 32 4.95 6833 32D 0.46 6856 P 39.87 6858 3 45.65 6854 4 45.65 6859 0 45.65 6860 0A 45.65 686 0B 67.07 6862 26 45.65 6852 26D 45.65 6863 32 45.65 6853 32D 39.87 687 P 39.87 6873 3 45.65 6869 4 45.65 6874 0 45.65 6875 0A 45.65 6876 0B 67.07 6877 26 45.65 6867 26D 45.65 6878 32 45.65 6868 32D 39.87 3 24 37 3 24 43 3 24 47 s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-7

FULL MORTISE HINGES Non-Ferrous Heavy Weight 5 Knuckle Bearing T4A3386 Code 50 4 2" x 5" 4.30 mm x 27 mm 4 2" x 6" 4.30 mm x 52.4 mm 4 2" x 7" 0.60 mm x 77.8 mm 4 2" x 8" 4.30 mm x 203.2 mm 7097 P 284.8 70973 3 284.8 70974 4 284.8 70975 0 284.8 70976 0A 284.8 70977 0B 326.69 70978 26 284.8 70970 26D 284.8 70979 32 284.8 70990 32D 274.7 7052 P 290.08 7054 3 290.08 7055 4 290.08 7056 0 290.08 7057 0A 290.08 7058 0B 332.74 7059 26 290.08 7050 26D 290.08 7060 32 290.08 705 32D 279.98 7000 P 299.50 700 3 299.50 7002 4 299.50 700 0 299.50 707 0A 299.50 70 0B 343.54 7006 26 299.50 7007 26D 299.50 705 32 299.50 706 32D 289.40 7087 P 35.96 7089 3 35.96 7090 4 35.96 709 0 35.96 7092 0A 35.96 7093 0B 362.43 7094 26 35.96 7085 26D 35.96 7095 32 35.96 7086 32D 305.87 3 24 60 3 24 60 3 24 60 3 24 60 5" x 6" 27 mm x 52.4 mm 5" x 7" 27 mm x 77.8 mm 5" x 8" 27 mm x 203.2 mm 70896 P 35.96 70898 3 35.96 70899 4 35.96 7065 0 35.96 7066 0A 35.96 7067 0B 362.43 7068 26 35.96 70892 26D 35.96 7069 32 35.96 70893 32D 305.87 70902 P 324.90 70904 3 324.90 70905 4 324.90 70906 0 324.90 70907 0A 324.90 70908 0B 372.68 70909 26 324.90 70900 26D 324.90 7090 32 324.90 7090 32D 34.80 70952 P 333.30 70954 3 333.30 70955 4 333.30 70956 0 333.30 70957 0A 333.30 70958 0B 382.32 70959 26 333.30 70950 26D 333.30 70949 32 333.30 7095 32D 323.20 3 24 70 3 24 70 3 24 70 Heavy Weight Stainless Steel Swing Clear T4A3395 Code 50 Hinges are NRP 4 2" 4.30 mm 5" 27 mm 5595 32D 40.5 3 24 59 5596 32D 52.26 3 24 59 s Effective January, 206 FM-8 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Steel Heavy Weight 2 Knuckle Bearing TA3750 Code 20 4 2" x 4 2" 4.30 mm x 4.30 mm 5" x 4 2" 27 mm x 4.30 mm R.H. 66523 P 68.49 L.H. 66524 P 68.49 R.H. 66528 AP 97.38 L.H. 66527 AP 97.38 R.H. 6653 3 97.38 L.H. 6654 3 97.38 R.H. 6655 4 97.38 L.H. 6656 4 97.38 R.H. 66505 0 97.38 L.H. 66506 0 97.38 R.H. 66533 0A 97.38 L.H. 66534 0A 97.38 R.H. 66532 0B.70 L.H. 6653 0B.70 R.H. 665 26 97.38 L.H. 6652 26 97.38 R.H. 6657 26D 75.60 L.H. 6658 26D 75.60 3 24 37 R.H. 66565 P 88.40 L.H. 66566 P 88.40 R.H. 66569 AP 8.64 L.H. 66570 AP 8.64 R.H. 6656 3 8.64 3 24 39 L.H. 66562 3 8.64 R.H. 66563 4 8.64 L.H. 66564 4 8.64 R.H. 66547 0 8.64 Continued on next column Continued 5" x 4 2" 27 mm x 4.30 mm L.H. 66548 0 8.64 R.H. 6657 0A 8.64 L.H. 66572 0A 8.64 R.H. 6658 0B 36.09 L.H. 66582 0B 36.09 R.H. 66553 26 8.64 L.H. 66554 26 8.64 R.H. 66559 26D 90.48 L.H. 66560 26D 90.48 5" x 5" 27 mm x 27 mm R.H. 66607 P 87.73 L.H. 66608 P 87.73 R.H. 66623 AP 8.64 L.H. 66624 AP 8.64 R.H. 66603 3 8.64 L.H. 66604 3 8.64 R.H. 66605 4 8.64 L.H. 66606 4 8.64 R.H. 66589 0 8.64 L.H. 66590 0 8.64 R.H. 6665 0A 8.64 L.H. 6666 0A 8.64 R.H. 66625 0B 36.09 L.H. 66626 0B 36.09 R.H. 66595 26 8.64 L.H. 66596 26 8.64 R.H. 6660 26D 90.48 L.H. 66602 26D 90.48 3 24 39 3 24 42 FULL MORTISE HINGES Steel Heavy Weight 5 Knuckle Bearing T4A3786 Code 50 4 2" x 4 2" 4.30 mm x 4.30 mm s Effective January, 206 58375 P 3.34 58382 AP 43.78 58343 3 39.80 58344 4 39.80 58345 9 43.78 58379 0 39.80 58367 0A 39.80 58346 0B 45.65 58346E 0BE 37.2 58373 5 34.0 58377 26 39.80 58384 26D 34.0 3 24 35 4 2" x 4 2" 4.30 mm x 4.30 mm (NRP) 5" x 4 2" 27 mm x 4.30 mm 5" x 4 2" 27 mm x 4.30 mm (NRP) 58387 P-NRP 36.34 58386 0-NRP 49.28 58388 26D-NRP 39.0 58440 P 37.07 58447 AP 56.06 58444 3 50.96 58446 4 50.96 58445 0 50.96 58453 0A 50.96 58464 0B 58.45 7285 5 38.65 58467 26 50.96 58443 26D 38.65 58442 P-NRP 42.22 58449 26D-NRP 43.20 3 24 35 3 24 4 3 24 4 Continued on next page Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-9

FULL MORTISE HINGES T4A3786 Code 50 Steel Heavy Weight 5 Knuckle Bearing Continued 5" x 5" 27 mm x 27 mm 58520 P 40.78 58526 AP 65.04 58530 3 65.04 58527 4 65.04 58524 0 59.3 5859 0A 65.04 58532 0B 67.82 58538 26 65.04 58522 26D 38.65 3 24 55 6" x 5" 52.4 mm x 27 mm 6" x 6" 52.4 mm x 52.4 mm 72783 P 35.6 72784 AP 35.6 72788 3 35.6 72789 4 35.6 7279 0 35.6 72799 0A 35.6 72792 0B 55.03 72795 26 35.6 72796 26D 25.06 58585 P 35.6 58580 AP 35.6 58596 3 35.6 58597 4 35.6 58588 0 35.6 58594 0A 35.6 5860 0B 55.03 58583 26 35.6 58586 26D 25.06 3 8 42 3 8 62 Steel Heavy Weight Wide Throw 5 Knuckle Bearing T4A3786 Code 50 4 2" x 5" 4.30 mm x 27 mm 4 2" x 6" 4.30 mm x 52.4 mm 4 2" x 7" 0.60 mm x 77.8 mm 7270 P 45.2 72702 AP 45.2 72703 3 45.2 72704 4 45.2 72705 0 45.2 72706 0A 45.2 72707 0B 66.56 72708 26 45.2 72700 26D 35. 72729 P 45.2 72730 AP 45.2 7273 3 45.2 72732 4 45.2 72733 0 45.2 72734 0A 45.2 72735 0B 66.56 72736 26 45.2 72728 26D 35. 72755 P 45.2 72756 AP 45.2 72757 3 45.2 72758 4 45.2 72759 0 45.2 72760 0A 45.2 7276 0B 66.56 72762 26 45.2 72754 26D 35. 3 24 55 3 24 55 3 24 55 4 2" x 8" 0.60 mm x 203.2 mm 5" x 6" 27 mm x 52.4 mm 5" x 7" 27 mm x 77.8 mm 5" x 8" 27 mm x 203.2 mm 7280 P 45.2 72802 AP 45.2 72803 3 45.2 72804 4 45.2 72805 0 45.2 72806 0A 45.2 72807 0B 66.56 72808 26 45.2 72800 26D 35. 7285 P 48.34 72852 AP 48.34 72859 3 48.34 72853 4 48.34 72854 0 48.34 72863 0A 48.34 72855 0B 70.6 72862 26 48.34 72857 26D 38.24 7290 P 48.34 72902 AP 48.34 72909 3 48.34 72903 4 48.34 72904 0 48.34 7293 0A 48.34 72905 0B 70.6 7292 26 48.34 72907 26D 38.24 7295 P 48.34 72952 AP 48.34 72959 3 48.34 72953 4 48.34 72954 0 48.34 72963 0A 48.34 72955 0B 70.6 72962 26 48.34 72957 26D 38.24 3 24 55 3 24 64 3 24 64 3 24 64 s Effective January, 206 FM-20 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Steel Heavy Weight 6-Bearing T6A3786 Code 50 Steel Heavy Weight Swing Clear 5 Knuckle Bearing T4A3795 Code 50 FULL MORTISE HINGES 8" x 6" 203.2 mm x 52.4 mm Steel Heavy Weight 5 Knuckle Concealed Bearing TCA3786 Code 50 58629 P 246.88 58630 AP 246.88 58634 3 246.88 58635 4 246.88 58637 0 246.88 58645 0A 246.88 58638 0B 283.20 5864 26 246.88 58642 26D 236.79 3 2 49 4 2" 4.30 mm 5" 27 mm 73456 P 47.84 73459 AP 48.54 73460 3 48.54 7346 4 35.04 73462 0 48.54 73465 0A 48.54 73466 0B 70.39 73467 26 48.54 73463 26D 80.8 73469 P 53.03 73470 AP 53.03 73474 3 39.2 73475 4 53.03 73477 0 53.03 73485 0A 53.03 73478 0B 75.54 7348 26 39.2 73482 26D 80.8 3 24 47 3 24 47 4 2" x 4 2" 4.30 mm x 4.30 mm 5" x 4 2" 27 mm x 4.30 mm 5" x 5" 27 mm x 27 mm 67320 P 58.34 6732 AP 73.96 67328 3 73.96 67322 4 73.96 67323 0 73.96 67333 0A 73.96 67324 0B 84.84 6733 26 73.96 67326 26D 57.56 67340 P 67.53 6734 AP 94.79 67348 3 94.79 67342 4 94.79 67343 0 94.79 67353 0A 94.79 67344 0B 08.72 6735 26 94.79 67346 26D 65.27 67360 P 67.53 6736 AP 94.90 67368 3 94.90 67362 4 94.90 67363 0 94.90 67359 0A 94.90 67364 0B 08.86 6737 26 94.90 67366 26D 7.80 3 24 35 3 24 4 3 24 43 Steel Swing Clear Heavy Weight Beveled Edge Bearing T4A4795 Code 50 4 2" 4.30 mm 5" 27 mm 73442 P 48.54 73443 AP 48.54 73444 3 48.54 73445 4 48.54 73446 0 48.54 73447 0A 48.54 73448 0B 70.39 73449 26 48.54 7345 26D 80.8 7359 P 53.03 73593 AP 53.03 73594 3 53.03 73595 4 53.03 73596 0 53.03 73597 0A 53.03 73598 0B 75.54 73599 26 53.03 73590 26D 80.8 Hinges are NRP, reversible and non-handed. 3 24 57 3 24 57 s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-2

FULL MORTISE HINGES Steel Standard Weight Swing Clear 5 Knuckle Bearing For Beveled Edge Doors TA4895 Code 50 4 2" 4.30 mm 57040 P 30.72 57048 AP 30.72 57044 3 30.72 57042 4 30.72 57043 0 30.72 57047 0A 30.72 57046 0B 49.95 57045 26 8.84 5704 26D 67.9 Hinges are NRP, reversible and non-handed. 3 24 38 MacPro Hinges Steel Standard Weight 5 Knuckle MP79 Code 57 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4" 4.30 mm x 0.60 mm MacPro Steel Standard Weight Five Knuckle Bearing MPB79 Code 57 76334 P.3 7630 3 2.46 7634 4.54 76322 0B 2.46 76387 5 2. 76326 26 2.46 76330 26D 2. 76335 P NRP.76 763 3 NRP 2.93 7635 4 NRP 2.00 76323 0B NRP 2.93 76327 26 NRP 2.93 7633 26D NRP 2.58 3 48 50 3 48 50 4 2" x 4 2" 4.30 mm x 4.30 mm 4 2" x 4 2" 4.30 mm x 4.30 mm 76368 P.3 76344 3 2.69 76348 4.54 76356 0B 3.09 76364E 0BE 2.63 76384 5 2. 76360 26 2.69 76364 26D 2. 76369 P NRP.76 76345 3 NRP 3.5 76349 4 NRP 2.00 76357 0B NRP 3.62 7636 26 NRP 3.5 76365 26D NRP 2.58 These hinges are not subject to any other discounts 3 48 54 3 48 54 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4" 4.30 mm x 0.60 mm 76366 P 2.58 76342 3 3.50 76346 4 3.5 76354 0B 3.50 76386 5 3.5 76358 26 3.50 76362 26D 3.5 76367 P NRP 3.04 76343 3 NRP 3.96 76347 4 NRP 3.62 76355 0B NRP 3.96 76359 26 NRP 3.96 76363 26D NRP 3.62 3 48 5 3 48 5 4 2" x 4 2" 4.30 mm x 4.30 mm 4 2" x 4 2" 4.30 mm x 4.30 mm 76336 P 2.58 7632 3 3.62 7636 4 3.5 76320 0 4.60 76324 0B 4.5 76324E 0BE 3.08 76383 5 3.5 76328 26 3.62 76332 26D 3.5 76337 P NRP 3.04 7633 3 NRP 4.08 7637 4 NRP 3.62 76325 0B NRP 4.68 76325E 0BE NRP 3.47 76329 26 NRP 4.08 76333 26D NRP 3.62 7632 0 NRP 5.00 3 48 55 3 48 55 s Effective January, 206 FM-22 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

MacPro Steel Heavy Weight Five Knuckle Bearing MPB68 Code 57 4 2" x 4 2" 4.30 mm x 4.30 mm 5" x 4 2" 27 mm x 4.30 mm 76374 26D 7.78 76375 26D NRP 8.24 76395 5 7.78 76390 26D 8.89 7639 26D NRP 9.94 3 24 35 3 24 39 MacPro Non-Ferrous Heavy Weight Five Knuckle Bearing MPB99 Code 57 4 2" x 4 2" 4.30 mm x 4.30 mm 5" x 4 2" 27 mm x 4.30 mm 76376 32D 6.44 76377 32D NRP 6.9 76392 32D 7.90 76393 32D NRP 9.06 3 24 37 3 24 4 FULL MORTISE HINGES MacPro Non-Ferrous Standard Weight Five Knuckle Bearing MPB9 Code 57 4 2" x 4 2" 4.30 mm x 4.30 mm 76340 32D 9.74 3 48 33 7634 32D NRP 0.2 These hinges are not subject to any other discounts s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FM-23

ELECTRIC HINGES Electric Hinges CC-4 TA234 - CC4 Code 59 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4 2" 4.30 mm x 4.30 mm TA274 - CC4 Code 59 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4 2" 4.30 mm x 4.30 mm 4 2" x 4 2" 4.30 mm x 4.30 mm 5" x 4 2" 27 mm x 4.30 mm 4 2" x 4 2" 4.30 mm x 4.30 mm 728 3 290.33 729 4 290.33 7220 0B 292.65 722 26 290.33 7222 26D 285.42 779 32D 277.68 7223 3 284.82 5987 4 284.82 739 0B 288.45 7224 26 289.67 742 26D 28.74 5683 32D 277.86 55664 P 248.97 7225 AP 256.54 7226 3 254.70 7227 4 254.70 7257 0 254.70 7228 0A 254.70 55668 0B 257.4 55666 26 254.70 55669 26D 73.24 7230 D3 256.54 723 D4 256.54 55888 P 248.97 7250 AP 256.54 728 3 254.70 55902 4 254.70 70 0 254.70 7252 0A 254.70 55886 0B 260.4 55887 26 254.70 55885 26D 45.27 7254 D3 256.54 7255 D4 254.70 T4A3386 - CC4 Code 59 7260 3 309.49 726 4 309.49 7262 0B 320.25 7263 26 36.8 706 26D 309.49 767 32D 305.4 7265 26D 309.49 720 32D 309.49 T4A3786 - CC4 Code 59 7378 P 267.64 7269 AP 280.08 7270 3 276.0 727 4 276.0 7272 0 276.0 7273 0A 276.0 7274 0B 28.95 7275 26 276.0 78 26D 63.5 7277 D3 280.08 7278 D4 280.08 T4A3786 - CC4 Code 59 5" x 4 2" 27 mm x 4.30 mm Swing Clear Hinges TA2895, TA4895, T4A3795, T4A4795 Code 59 4 2" 4.30 mm Electric Hinges CC-6 TA234 - CC6 Code 59 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4 2" 4.30 mm x 4.30 mm TA274 - CC6 Code 59 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4 2" 4.30 mm x 4.30 mm 7280 P 273.37 736 26D 73.87 TA2895 73650 26D 39.99 TA4895 73657 26D 39.99 T4A3795 73664 26D 333.5 T4A4795 7367 26D 333.6 T4A3795, T4A4795 Code 59 5" 27 mm T4A3795 73678 26D 333.6 T4A4795 73685 26D 333.6 7285 3 303.28 7286 4 303.28 7287 0B 305.60 7288 26 303.28 7289 26D 298.37 763 32D 290.63 7292 3 297.77 7293 4 297.77 7294 0B 30.40 7295 26 302.62 7296 26D 294.7 759 32D 290.63 7300 P 26.92 730 AP 269.49 7302 3 267.65 7303 4 267.65 7304 0 267.65 7305 0A 267.65 7306 0B 270.46 7307 26 267.65 7308 26D 264.93 730 D3 269.49 73 D4 269.49 7205 P 26.92 734 AP 269.49 7200 3 267.65 720 4 267.65 7202 0 267.65 733 0A 267.65 7203 0B 273.36 7204 26 267.65 720 26D 59.86 736 D3 269.49 737 D4 269.49 s Effective January, 206 EH- Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Electric Hinges CC-6 T4A3386 - CC6 Code 59 4 2" x 4 2" 4.30 mm x 4.30 mm 5" x 4 2" 27 mm x 4.30 mm T4A3786 - CC6 Code 59 4 2" x 4 2" 4.30 mm x 4.30 mm 5" x 4 2" 27 mm x 4.30 mm Electric Hinges CC-8 TA234 - CC8 Code 59 7320 3 322.44 732 4 322.44 7322 0B 333.20 7323 26 329.76 774 26D 322.44 7208 32D 38.36 7326 26D 322.44 72 32D 322.44 7330 P 280.59 733 AP 293.03 7332 3 293.03 7333 4 289.05 7334 0 289.05 7335 0A 289.05 7336 0B 294.90 7337 26 289.05 773 26D 283.26 7339 D3 293.03 7340 D4 293.03 7342 P 286.32 7343 26D 287.90 Swing Clear Hinges TA2895, TA4895, T4A3795, T4A4795 Code 59 4 2" 4.30 mm T4A3795, T4A4795 Code 59 5" 27 mm 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4 2" 4.30 mm x 4.30 mm TA2895 7365 26D 332.94 TA4895 73658 26D 332.94 T4A3795 73665 26D 346.56 T4A4795 73672 26D 346.56 T4A3795 73679 26D 346.56 T4A4795 73686 26D 346.56 7450 3 328.28 745 4 328.28 7452 0B 330.60 7453 26 328.28 7454 26D 323.37 765 32D 35.63 7456 3 322.77 7457 4 322.77 7458 0B 326.40 7459 26 327.62 5684 26D 39.7 76 32D 35.63 Electric Hinges CC-8 TA274 - CC8 Code 59 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4 2" 4.30 mm x 4.30 mm T4A3386 - CC8 Code 59 4 2" x 4 2" 4.30 mm x 4.30 mm 5" x 4 2" 27 mm x 4.30 mm T4A3786 - CC8 Code 59 4 2" x 4 2" 4.30 mm x 4.30 mm 5" x 4 2" 27 mm x 4.30 mm 746 P 286.92 7462 AP 294.49 7463 3 292.65 7464 4 292.65 7465 0 292.65 7466 0A 292.65 7467 0B 295.36 7468 26 292.65 7469 26D 7.83 747 D3 294.49 7472 D4 294.49 55906 P 286.92 7474 AP 294.49 7475 3 292.65 7476 4 292.65 7477 0 292.35 7478 0A 292.65 7479 0B 32.6 7480 26 292.65 55904 26D 7.83 7482 D3 294.49 7483 D4 292.65 7485 3 347.44 7486 4 347.44 7487 0B 358.20 7488 26 354.76 768 26D 347.44 769 32D 343.36 7490 26D 347.44 722 32D 347.44 7492 P 305.59 7493 AP 38.03 7494 3 34.05 7495 4 34.05 7496 0 34.05 7497 0A 34.05 7498 0B 39.90 7499 26 34.05 766 26D 90.59 7506 D3 38.03 7507 D4 38.03 7508 26D 209.40 Swing Clear Hinges TA2895, TA4895, T4A3795, T4A4795 Code 59 4 2" TA2895 73652 26D 357.94 4.30 mm T4A3795, T4A4795 Code 59 5" 27 mm TA4895 73659 26D 357.94 T4A3795 73666 26D 37.56 T4A4795 73673 26D 37.56 T4A3795 73680 26D 37.56 T4A4795 73687 26D 37.56 ELECTRIC HINGES s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. EH-2

ELECTRIC HINGES Electric Hinges QC-2 TA234 - QC2 Code 59 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4 2" 4.30 mm x 4.30 mm TA274 - QC2 Code 59 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4 2" 4.30 mm x 4.30 mm 7300 3 278.33 730 4 278.33 7302 0B 280.65 7303 26 278.33 7304 26D 273.42 7305 32D 265.68 7306 3 272.82 7307 4 272.82 7308 0B 276.45 7309 26 272.82 730 26D 269.76 73 32D 265.68 732 P 236.97 733 AP 244.54 734 3 242.70 735 4 242.70 736 0 242.70 737 0A 242.70 738 0B 245.5 739 26 242.70 7320 26D 239.98 7322 D3 244.54 7323 D4 244.54 7324 P 236.97 7325 AP 244.54 7326 3 242.70 7327 4 242.70 7328 0 242.70 7329 0A 242.70 7330 0B 248.4 733 26 242.70 7332 26D 239.23 7334 D3 244.54 7335 D4 244.54 T4A3386 - QC2 Code 59 4 2" x 4 2" 4.30 mm x 4.30 mm 5" x 4 2" 27 mm x 4.30 mm 7336 3 297.49 7337 4 297.49 7338 0B 308.25 7339 26 304.8 7340 26D 297.49 734 32D 293.4 7342 26D 297.49 7343 32D 297.49 T4A3786 - QC2 Code 59 4 2" x 4 2" 4.30 mm x 4.30 mm 7344 P 255.64 7345 AP 268.08 7346 3 264.0 7347 4 264.0 7348 0 264.0 7349 0A 264.0 7350 0B 269.95 735 26 264.0 7352 26D 258.3 7354 D3 268.08 7355 D4 268.08 Electric Hinges QC-2 T4A3786 - QC2 Code 59 5" x 4 2" 27 mm x 4.30 mm 7356 P 26.37 7357 26D 262.95 Swing Clear Hinges TA2895, TA4895, T4A3795, T4A4795 Code 59 4 2" 4.30 mm T4A3795, T4A4795 Code 59 5" 27 mm Electric Hinges QC-4 TA234 - QC4 Code 59 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4 2" 4.30 mm x 4.30 mm 7360 3 35.83 736 4 35.83 7362 0B 38.5 7363 26 35.83 7364 26D 30.92 7365 32D 303.8 7366 3 30.32 7367 4 30.32 7368 0B 33.95 7369 26 35.7 7370 26D 307.26 737 32D 303.8 TA274 - QC4 Code 59 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4 2" 4.30 mm x 4.30 mm TA2895 73653 26D 307.99 TA4895 73660 26D 307.99 T4A3795 73667 26D 32.6 T4A4795 73674 26D 32.6 T4A3795 7368 26D 32.6 T4A4795 73688 26D 32.6 7372 P 274.47 7373 AP 282.04 7374 3 280.20 7375 4 280.20 7376 0 280.20 7377 0A 280.20 7378 0B 282.9 7379 26 280.20 7380 26D 277.48 7382 D3 282.04 7383 D4 282.04 7384 P 274.47 7385 AP 282.04 7386 3 280.20 7387 4 280.20 7388 0 280.20 7389 0A 280.20 7390 0B 285.9 739 26 280.20 7392 26D 83.84 7394 D3 282.04 7395 D4 282.04 s Effective January, 206 EH-3 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Electric Hinges QC-4 T4A3386 - QC4 Code 59 4 2" x 4 2" 4.30 mm x 4.30 mm 5" x 4 2" 27 mm x 4.30 mm 73200 3 334.99 7320 4 334.99 73202 0B 345.75 73203 26 342.3 73204 26D 334.99 73205 32D 330.9 73206 26D 334.99 73207 32D 334.99 T4A3786 - QC4 Code 59 4 2" x 4 2" 4.30 mm x 4.30 mm 5" x 4 2" 27 mm x 4.30 mm 73208 P 293.4 73209 AP 305.58 7320 3 30.60 732 4 30.60 7322 0 30.60 7323 0A 30.60 7324 0B 307.45 7325 26 30.60 7326 26D 232.62 7328 D3 305.58 7329 D4 305.58 73220 P 298.87 7322 26D 26.3 Swing Clear Hinges TA2895, TA4895, T4A3795, T4A4795 Code 59 4 2" 4.30 mm T4A3795, T4A4795 Code 59 5" 27 mm Electric Hinges QC-6 TA234 - QC6 Code 59 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4 2" 4.30 mm x 4.30 mm TA2895 73654 26D 345.49 TA4895 7366 26D 345.49 T4A3795 73668 26D 359. T4A4795 73675 26D 359. T4A3795 73682 26D 359. T4A4795 73689 26D 359. 73222 3 328.33 73223 4 328.33 73224 0B 330.65 73225 26 330.65 73226 26D 323.42 73227 32D 35.68 73228 3 322.82 73229 4 322.82 73230 0B 326.45 7323 26 327.67 73232 26D 39.76 73233 32D 35.68 Electric Hinges QC-6 TA274 - QC6 Code 59 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4 2" 4.30 mm x 4.30 mm 73234 P 286.97 73235 AP 294.54 73236 3 292.70 73237 4 292.70 73238 0 292.70 73239 0A 292.70 73240 0B 295.4 7324 26 292.70 73242 26D 289.98 73244 D3 294.54 73245 D4 294.54 73246 P 286.97 73247 AP 294.54 73248 3 292.70 73249 4 292.70 73250 0 292.70 7325 0A 292.70 73252 0B 298.4 73253 26 292.70 73254 26D 98.55 73256 D3 294.54 73257 D4 294.54 T4A3386 - QC6 Code 59 4 2" x 4 2" 4.30 mm x 4.30 mm 5" x 4 2" 27 mm x 4.30 mm 73258 3 347.49 73259 4 347.49 73260 0B 358.25 7326 26 354.8 73262 26D 347.49 73263 32D 343.4 73264 26D 347.49 73265 32D 347.49 T4A3786 - QC6 Code 59 4 2" x 4 2" 4.30 mm x 4.30 mm 5" x 4 2" 27 mm x 4.30 mm 73266 P 305.64 73267 AP 38.08 73268 3 34.0 73269 4 34.0 73270 0 34.0 7327 0A 34.0 73272 0B 39.95 73273 26 34.0 73274 26D 28.56 73276 D3 38.08 73277 D4 38.08 73278 P 3.37 73279 26D 294.34 Swing Clear Hinges TA2895, TA4895, T4A3795, T4A4795 Code 59 4 2" 4.30 mm TA2895 73655 26D 357.99 TA4895 73662 26D 357.99 T4A3795 73669 26D 37.6 T4A4795 73676 26D 37.6 ELECTRIC HINGES s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. EH-4

ELECTRIC HINGES Electric Hinges QC-6 Electric Hinges QC-8 TA234 - QC8 Code 59 TA274 - QC8 Code 59 Swing Clear Hinges T4A3795, T4A4795 Code 59 5" 27 mm 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4 2" 4.30 mm x 4.30 mm 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4 2" 4.30 mm x 4.30 mm 73280 3 353.23 7328 4 353.23 73282 0B 355.55 73283 26 353.23 73284 26D 348.32 73285 32D 340.58 73286 3 347.72 73287 4 347.72 73288 0B 35.35 73289 26 352.57 73290 26D 344.66 7329 32D 340.58 73292 P 3.87 73293 AP 39.44 73294 3 37.60 73295 4 37.60 73296 0 37.60 73297 0A 37.60 73298 0B 320.3 73299 26 37.60 73300 26D 34.88 73302 D3 39.44 73303 D4 39.44 73304 P 3.87 73305 AP 39.44 73306 3 37.60 73307 4 37.60 73308 0 37.60 73309 0A 37.60 7330 0B 323.3 733 26 37.60 7332 26D 22.7 7334 D3 39.44 7335 D4 39.44 T4A3386 - QC8 Code 59 4 2" x 4 2" 4.30 mm x 4.30 mm 5" x 4 2" 27 mm x 4.30 mm T4A3795 73683 26D 37.6 T4A4795 73690 26D 37.6 7336 3 372.39 7337 4 372.39 7338 0B 383.5 7339 26 379.7 73320 26D 372.39 7332 32D 368.3 73322 26D 372.39 73323 32D 372.39 Electric Hinges QC-8 T4A3786 - QC8 Code 59 4 2" x 4 2" 4.30 mm x 4.30 mm 5" x 4 2" 27 mm x 4.30 mm 73324 P 330.54 73325 AP 342.98 73326 3 339.00 73327 4 339.00 73328 0 339.00 73329 0A 339.00 73330 0B 344.85 7333 26 339.00 73332 26D 25.5 73334 D3 342.98 73335 D4 342.98 73336 26D 33.75 73337 P 336.27 Swing Clear Hinges TA2895, TA4895, T4A3795, T4A4795 Code 59 4 2" 4.30 mm T4A3795, T4A4795 Code 59 5" 27 mm Electric Hinges QC-0 TA234 - QC0 Code 59 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4 2" 4.30 mm x 4.30 mm 73900 3 390.63 7390 4 390.63 73902 0B 392.95 73903 26 390.63 73904 26D 385.72 73905 32D 377.98 73906 3 385.2 73907 4 385.2 73908 0B 388.75 73909 26 389.97 7390 26D 382.06 739 32D 377.98 TA274 - QC0 Code 59 4 2" x 4" 4.30 mm x 0.60 mm TA2895 73656 26D 382.89 TA4895 73663 26D 382.89 T4A3795 73670 26D 396.5 T4A4795 73677 26D 396.5 T4A3795 73684 26D 396.5 T4A4795 7369 26D 396.5 7392 P 349.27 7393 AP 356.84 7394 3 355.00 7395 4 355.00 7396 0 355.00 7397 0A 355.00 7398 0B 357.7 7399 26 355.00 73920 26D 352.28 73922 D3 356.84 73923 D4 356.84 s Effective January, 206 EH-5 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Electric Hinges QC-0 TA274 - QC0 Code 59 4 2" x 4 2" 4.30 mm x 4.30 mm 73924 P 349.27 73925 AP 356.84 73926 3 355.00 73927 4 355.00 73928 0 355.00 73929 0A 355.00 73930 0B 360.7 7393 26 355.00 73932 26D 35.53 73934 D3 356.84 73935 D4 355.00 T4A3386 - QC0 Code 59 4 2" x 4 2" 4.30 mm x 4.30 mm 5" x 4 2" 27 mm x 4.30 mm 73936 3 409.79 73937 4 409.79 73938 0B 420.55 73939 26 47. 73940 26D 409.79 7394 32D 405.7 73942 26D 463.76 73943 32D 45.8 Electric Hinges QC-2 TA274 - QC2 Code 59 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4 2" 4.30 mm x 4.30 mm 73350 P 386.47 7335 AP 394.04 73352 3 392.20 73353 4 392.20 73354 0 392.20 73355 0A 392.20 73356 0B 394.9 73357 26 392.20 73358 26D 347.2 73360 D3 394.04 7336 D4 394.04 73362 P 386.47 73363 AP 394.04 73364 3 392.20 73365 4 392.20 73366 0 392.20 73367 0A 392.20 73368 0B 397.9 73369 26 392.20 73370 26D 242.2 73372 D3 394.04 73373 D4 394.04 ELECTRIC HINGES T4A3786 - QC0 Code 59 4 2" x 4 2" 4.30 mm x 4.30 mm 5" x 4 2" 27 mm x 4.30 mm 73944 P 422.32 73945 AP 422.32 73946 3 425.95 73947 4 427.7 73948 0 49.26 73949 0A 45.8 73950 0B 386.47 7395 26 394.04 73952 26D 392.20 73954 D3 392.20 73955 D4 392.20 73956 P 394.9 73957 26D 392.20 Electric Hinges QC-2 TA234 - QC2 Code 59 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4 2" 4.30 mm x 4.30 mm 73338 3 427.83 73339 4 427.83 73340 0B 430.5 7334 26 427.83 73342 26D 422.92 73343 32D 45.8 73344 3 422.32 73345 4 422.32 73346 0B 425.95 73347 26 427.7 73348 26D 49.26 73349 32D 45.8 T4A3386 - QC2 Code 59 4 2" x 4 2" 4.30 mm x 4.30 mm 5" x 4 2" 27 mm x 4.30 mm 73374 3 446.99 73375 4 446.99 73376 0B 457.75 73377 26 454.3 73378 26D 446.99 73379 32D 442.9 73380 26D 446.99 7338 32D 446.99 T4A3786 - QC2 Code 59 4 2" x 4 2" 4.30 mm x 4.30 mm 5" x 4 2" 27 mm x 4.30 mm 73382 P 405.4 73383 AP 47.58 73384 3 43.60 73385 4 43.60 73386 0 43.60 73387 0A 43.60 73388 0B 49.45 73389 26 43.60 73390 26D 407.8 73392 D3 47.58 73393 D4 47.58 73395 P 40.87 73394 26D 386.36 s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. EH-6

ELECTRIC HINGES Code 57 MacPro Electric Hinges - Concealed Circuit (CC) Product MPB79-CC4 4 2" x 4" 76400 26D 46.8 MPB79-CC8 4.30 mm x 0.60 mm 76402 26D 58.9 MPB79-CC4 4 2" x 4 2" 76405 26D 46.8 MPB79-CC8 4.30 mm x 4.30 mm 76407 26D 58.9 MPB68-CC4 4 2" x 4 2" 7640 26D 50.76 MPB68-CC8 4.30 mm x 4.30 mm 7642 26D 57.29 MacPro Electric Hinges - ElectroLynx Quick Connect (QC) Product MPB79-QC4 4 2" x 4" 7640 26D 49.54 MPB79-QC8 4.30 mm x 0.60 mm 76403 26D 66.0 MPB79-QC2 76404 26D 73.84 MPB79-QC4 4 2" x 4 2" 76406 26D 49.54 MPB79-QC8 4.30 mm x 4.30 mm 76408 26D 66.0 MPB79-QC2 76409 26D 73.84 MPB68-QC4 4 2" x 4 2" 764 26D 65.47 MPB68-QC8 4.30 mm x 4.30 mm 7643 26D 66.38 MPB68-QC2 7644 26D 5.70 ElectroLynx As part of their promise to provide innovative, fast and effective high security solutions to their customers, certain ASSA ABLOY Group brands offer ElectroLynx, a universal quick-connect system that simplifies the electrification of the door opening. ElectroLynx is a registered trademark of ASSA ABLOY Inc. s Effective January, 206 EH-7 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Transfer Device Solutions McKinney ElectroLynx Harnesses & Components For Metal Doors CORBIN RUSSWIN, SARGENT, and YALE Code 79 electric hinges If metal door, order a retrofit cable with Molex connectors on both ends. If the metal door is polystyrene filled or steel stiffened, the cable may need to be routed up and over the door. PART # McKinney Catalog # 3", 6" & 2" Harness Between hinge and the end of an exit device 9398 QC-C003 93982 QC-C006 Description: QC2-3" Wire Harness; 8 & 4 Pin Connector w/2 wires (For Exit Device Rail Jumper to Hinge) QC2-6" Wire Harness; 8 & 4 Pin Connector w/2 wires (For Exit Device Rail Jumper to Hinge) QC2-2" Wire Harness; 8 & 4 Pin Connector w/2 wires 93983 QC-C02 (For Exit Device Rail Jumper to Hinge) 2', 3' & 4' Harness Between hinge and through the door to the lockset or exit device trim Net Max Hinge required (Not included) 9.32 QC2 9.76 QC2 2.89 QC2 93984 QC-C200 QC2-26" Wire Harness; 8 & 4 Pin Connector w/2 Wires 4.48 QC2 93985 QC-C206 QC2-32" Wire Harness; 8 & 4 Pin Connector w/2 Wires 5.63 QC2 93986 QC-C300 QC2-38" Wire Harness; 8 & 4 Pin Connector w/2 wires 6.0 QC2 93987 QC-C306 QC2-44" Wire Harness; 8 & 4 Pin Connector w/2 wires 6.9 QC2 93988 QC-C400 QC2-50" Wire Harness; 8 & 4 Pin Connector w/2 wires 6.47 QC2 5' Harness From the hinge location, up the jamb to the above the ceiling, or up and around a full lite or half lite metal door. 93989 QC-C500 QC2-5' 2" Wire Harness; 8 & 4 Pin Connector w/2 Wires 36.08 QC2 QC2 - Custom sizes available. Consult factory. Harness; 8 & 4 Pin Connector Custom * POA w/2 Wires * Custom size cables less than 50" price at $8.35. Cables over 50" price as $.35 per inch over 50" price of 8.35 QC2 s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. EH-8

electric hinges Transfer Device Solutions McKINNEY ElectroLynx Harnesses & Components For Wood Doors CORBIN RUSSWIN, SARGENT, and YALE Code 79 If wood door, order a retrofit cable with the Molex connector on one end, and pins crimped on the other end. PART # McKinney CATALOG # 3", 6" & 2" Harness Between hinge and the end of an exit device Description: 93990 QC-C003P QC2-3" Wire Harness; 8 & 4 Pin Connector w/2 wires (For Exit Device Rail Jumper to Hinge, Insert pre-pinned ends into plastic Molex connector) QC2-6" Wire Harness; 8 & 4 Pin Connector w/2 wires 9399 QC-C006P (For Exit Device Rail Jumper to Hinge, Insert pre-pinned ends into plastic Molex connector) QC2-2" Wire Harness; 8 & 4 Pin Connector w/2 wires 93992 QC-C02P (For Exit Device Rail Jumper to Hinge, Insert pre-pinned ends into plastic Molex connector) 2', 3' & 4' Harness Between hinge and through the door to the lockset or exit device trim. 93993 QC-C200P QC2-26" Wire Harness; 8 & 4 Pin Connector w/2 wires (Insert pre-pinned ends into plastic Molex connector) Net Max Hinge required (Not included).9 QC2 2.35 QC2 5.48 QC2 7.06 QC2 93994 QC-C206P 93995 QC-C300P 93996 QC-C306P QC2-32" Wire Harness; 8 & 4 Pin Connector w/2 wires (Insert pre-pinned ends into plastic Molex connector) QC2-38" Wire Harness; 8 & 4 Pin Connector w/2 wires (Insert pre-pinned ends into plastic Molex connector) QC2-44" Wire Harness; 8 & 4 Pin Connector w/2 wires (Insert pre-pinned ends into plastic Molex connector) 8.2 QC2 8.60 QC2 8.77 QC2 93997 QC-C400P QC2-50" Wire Harness; 8 & 4 Pin Connector w/2 wires (Insert pre-pinned ends into plastic Molex connector) 5' Harness From the hinge location, up the jamb to the above the ceiling, or up and around a full lite or half lite metal door. 93998 QC-C500P QC2-5' 2" Wire Harness; 8 & 4 Pin Connector w/2 Wires (Termination in Field) 9.06 QC2 38.68 QC2 93970 QC-C2500P QC2-25' Wire Harness, 8 & 4 Pin Connector w/2 Wires 45.06 QC2 9397 QC-C3000P QC2-30' Wire Harness; 8 & 4 Pin Connector w/2 Wires 54.07 QC2 Custom * Custom sizes available. Consult the factory POA QC2 * Custom size cables less than 50" price at $8.65 Cables over 50" price as $.35 per inch over 50" price of 8.65 s Effective January, 206 EH-9 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Transfer Device Solutions McKinney ElectroLynx Harnesses & Components CORBIN RUSSWIN, SARGENT, and YALE Code 79 electric hinges McKinney PART # CATALOG # Miscellaneous Kits Description: 94034 QC-R00 Molex/Repair/Service Kit Miscellaneous Kits Kit Application: Includes 2, 4, 8 Molex receptacles and plugs ( 0 ea) and the corresponding terminals (00 of each type), extraction tool and pinning assembly guide. Customer must purchase Molex crimper separately. Net 0.92 94035 QC-R002 Extraction Tool Quantity, Sold one each 2. 94036 QC-R003 Molex Hand Crimp Tool Molex tool used to attach terminals to wire (stripped) ends 439.70 PART # McKinney CATALOG # Receptacles and Terminals Description: Kit Application: Net 94037 QC-RF2 Female Receptacle 2 CKT Quantity Bag of 00 24.80 94026 QC-RF4 Female Receptacle 4 CKT Quantity Bag of 00 30.35 94027 QC-RF8 Female Receptacle 8 CKT Quantity Bag of 00 40.0 94028 QC-RM2 Male Receptacle 2 CKT Quantity Bag of 00 26.38 93978 QC-RM4 Male Receptacle 4 CKT Quantity Bag of 00 3.3 93979 QC-RM8 Male Receptacle 8 CKT Quantity Bag of 00 4.03 94029 QC-FT2024 Female Terminal AWG 20-24 Quantity Bag of 00 0.29 94030 QC-FT2630 Female Terminal AWG 26-30 Quantity Bag of 00 0.29 93980 QC-MT2024 Male Terminal AWG 20-24 Quantity Bag of 00 8.95 9403 QC-MT2630 Male Terminal AWG 26-30 Quantity Bag of 00 0.29 94033 QC-DCC Pinning Assembly Guide Quantity Bag of 0 22.36 9406 POE-MT2024 Male Terminal AWG 20-24 Quantity Bag of 00 3.42 9407 POE-RM6 Male Plug 6 CKT Quantity, Bag of 00 26.00 9408 POE-RF6 Female Plug 6 CKT Quantity, Bag of 00 26.00 9409 POE-MT2630 Male Terminal AWG 26-30 Quantity, Bag of 00 3.76 94020 POE-FT2630 Female Terminal AWG 26-30 Quantity, Bag of 00 3.76 Female Receptacle (8 ckt) Locking mechanism Male Plug (8 ckt) Door Cord and EPT 94002 MCK-TSB-C Door Cord Gray/Black Caps 8" Quantity, Sold 7.82 94003 MCK-TSB-CXL Door Cord Gray/Black Caps 36" Quantity, Sold 24.4 94004 MCK-EPT Electrical Power Transfer Quantity, Sold 4.55 94005 MCK-EPTL Electrical Power Transfer, Long Quantity, Sold 54.75 94006 MCK-EL-EPT ElectroLynx EPT -2 wire Quantity, Sold 65.96 94007 MCK-EL-EPTL ElectroLynx EPTL Long -2 wire Quantity, Sold 79.5 As part of their promise to provide innovative, fast and effective high security solutions to their customers, ASSA ABLOY Group brands offer ElectroLynx, a universal quick-connect system that simplifies the electrification of the door opening. ElectroLynx is a registered trademark of ASSA ABLOY Inc. s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. EH-0

electric hinges Transfer Device Solutions McKinney ElectroLynx Power over Ethernet (PoE) Hinge & Harnesses Code 79 Frame side harness assembly (5ft length) Cable drain wire concealed in shrink tubing Cable - CAT 5e, 24 AWG stranded, shielded, 00ohm, with drain wire A Cable wires to be terminated in field per lock instructions Frame Side Harness Assembly B PART # PoE Data Hinge Code 59 McKinney CATALOG # U.S. Patent No. 7,824,200 PoE Door Harness Assembly C Cable - CAT 5e, 26 AWG stranded, shielded, 00ohm Description: Two 4-CKT lock mating connectors Net 73695 4.5 x 4.5 TA274 26D PoE Standard Weight 5 Knuckle 607.93 73696 4.5 x 4.5 T4A3786 26D PoE Heavy Weight 5 Knuckle 627.0 Consult the factory for additional items with PoE option. Lock mating connectors are small enough to run through a 3/8" (min.) stile to stile door raceway. Ring terminal to be NOTES: secured inside lock The PoE door & frame harnesses can accommodate a variety of new (with raceway) and retrofit applications. Connectors are small enough to run through a 3/8" (min.) stile-to-stile door raceway. Connects to intelligent Power over Ethernet electromechanical hardware from SARGENT and CORBIN RUSSWIN. PART # McKinney CATALOG # Harness Length Application Description: Net Max Hinge Req'd (not included) Door Harnesses 94022 PoE-C206P 30" 94038 PoE-C300P 36" 94039 PoE-C306P 42" 94040 PoE-C400P 48" 9404 PoE-C406P 54" Between Hinge & PoE Lock 94042 PoE-C500P 60" Door Harness Assembly 9402 PoE-C700P 84" Door Harness Assembly 94043 PoE-C300P 56" Door Harness Assembly EPT Harness 94023 PoE-CEPT30 360" EPT Harness Assembly EPT Harness Frame Harness 94044 PoE-C500P 80" 20" to 25" door width (doors with 3 butt hinges with PoE hinge in center stile-to-stile raceway to lock prep). 26" to 3" door width (doors with 3 butt hinges with PoE hinge in center stile-to-stile raceway to lock prep). 32" to 36" door width (doors with 3 butt hinges with PoE hinge in center stile-to-stile raceway to lock prep). 37" to 42" door width (doors with 3 butt hinges with PoE hinge in center stile-to-stile raceway to lock prep). 43" to 48" door width (doors with 3 butt hinges with PoE hinge in center stile-to-stile raceway to lock prep). From the hinge location, up the jamb to the wall/ceiling. PoE, Cat 5e, 26AWG, Shielded, Screened,00ohm, Door Harness Assembly PoE, Cat 5e, 26AWG, Shielded, Screened,00ohm, Door Harness Assembly PoE, Cat 5e, 26AWG, Shielded, Screened,00ohm, Door Harness Assembly PoE, Cat 5e, 26AWG, Shielded, Screened,00ohm, Door Harness Assembly PoE, Cat 5e, 26AWG, Shielded, Screened,00ohm, Door Harness Assembly PoE, CAT 5e, 26AWG, Shielded, Stranded, 00ohm, Door Frame Harness Assembly PoE, CAT 5e, 26AWG, Shielded, Stranded, 00ohm, Door Frame Harness Assembly PoE, CAT 5e, 26AWG, Shielded, Stranded, 00ohm, Door Frame Harness Assembly PoE, CAT 5e, 26AWG, Shielded, Stranded, 00ohm, Door Frame Harness Assembly Between hinge and PoE Network Cable & Switch PoE, Cat 5e, 26AWG, Shielded, Screened,00ohm, Door Harness Assembly 26.48 PoE 27.3 PoE 27.65 PoE 28.37 PoE 29.5 PoE 37.02 PoE 40.4 PoE 44.25 PoE 66.30 PoE 3.0 PoE Custom Custom sizes available. Consult factory. POA PoE The door harness connectors are small enough to run through a 3/8" (minimum) stile-to-stile door raceway. *See the McKinney Catalog for additional finishes and hinge types. Note: One hinge, door harness and frame harness are required for each PoE opening Cables over 60" add $.62 per inch to 60" price. s Effective January, 206 EH- Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Non-Ferrous Bearing TA39 Code 30 5" x 4 2" 27 mm x 4.30 mm Non-Ferrous Bearing TA393 Code 30 5" x 4 2" 27 mm x 4.30 mm FULL MORTISE ANCHOR HINGE SETS Anchor plate for jamb and door header only. Permits use of holders, closers concealed in top of jamb. Anchor plate for jamb header only, permits the use of holders and closers concealed in the top of the door. Hand 5" x 4 2" 27 mm x 4.30 mm R.H. 7668 P 589.9 SET L.H. 7669 P 589.9 SET R.H. 7684 26D 589.9 SET L.H. 7685 26D 589.9 SET R.H. 7688 32D 578.46 SET L.H. 7689 32D 578.46 SET 4 SETS SET 28 Set consists of top anchor, intermediate and bottom hinge for square edge door application. Anchor Hinge Sets are not available in brite finishes. TA392 Code 30 Hand 5" x 4 2" 27 mm x 4.30 mm R.H. 75565 P 545.4 SET L.H. 75566 P 545.4 SET R.H. 7552 26D 469.77 SET L.H. 7553 26D 469.77 SET R.H. 7558 32D 485.86 SET L.H. 75582 32D 485.86 SET Non-Ferrous Bearing Hinges 4" Door Leg TA394 Code 30 4 SETS SET 28 Set consists of top anchor, intermediate and bottom hinge for square edge door application. Anchor Hinge Sets are not available in brite finishes. Anchor plate for jamb and door header permits use of surface applied holders and closers. Anchor plate for both jamb and door header. Permits use of both holders, closers. Hand Hand R.H. 75502 P 49.62 SET L.H. 75503 P 49.62 SET R.H. 75496 26D 45.67 SET L.H. 75497 26D 45.67 SET R.H. 75500 32D 407.56 SET L.H. 7550 32D 407.56 SET 4 SETS SET 28 R.H. 75435 P 559.87 SET L.H. 75436 P 559.87 SET R.H. 7545 26D 470.03 SET L.H. 75452 26D 470.03 SET R.H. 75455 32D 528.62 SET L.H. 75456 32D 528.62 SET 4 SETS SET 28 Set consists of top anchor, intermediate and bottom hinge for square edge door application. Anchor Hinge Sets are not available in brite finishes Set consists of top anchor, intermediate and bottom hinge for square edge door application. Anchor Hinge Sets are not available in brite finishes. s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. AH-

FULL MORTISE ANCHOR HINGE SETS Heavy Weight Beveled Edge Non-Ferrous Bearing TA5392 Code 30 5" x 4 2" 27 mm x 4.30 mm Non-Ferrous Bearing Hinges For Beveled Edge Doors 4" Door Leg TA5394 Code 30 5" x 4 2" 27 mm x 4.30 mm Anchor plate for both jamb and door header permits use of surface applied holders and closers. Anchor plate for both jamb and door header permits use of surface applied holders and closers. Hand Hand R.H. 75605 P 49.62 SET L.H. 75606 P 49.62 SET R.H. 75546 26D 45.67 SET L.H. 75547 26D 45.67 SET R.H. 75544 32D 407.56 SET L.H. 75545 32D 407.56 SET 4 SETS SET 28 R.H. 75700 P 559.87 SET L.H. 7570 P 559.87 SET R.H. 75735 26D 470.03 SET L.H. 75736 26D 470.03 SET R.H. 75739 32D 528.62 SET L.H. 75740 32D 528.62 SET 4 SETS SET 28 Set consists of top anchor, intermediate and bottom hinge for beveled ( 8" in 2") edge doors on hinge side application. Anchor Hinge Sets are not available in brite finishes. TA5393 Code 30 5" x 4 2" 27 mm x 4.30 mm Set consists of top anchor, intermediate and bottom hinge for beveled ( 8" in 2") edge doors on hinge side application. Anchor Hinge Sets are not available in brite finishes. Steel Anchor Hinge Bearing TA79 Code 30 5" x 4 2" 27 mm x 4.30 mm Anchor plate for jamb header only, permits the use of holders and closers concealed in the top of the door. Anchor plate for door header only. Permits use of holders, closers concealed in top of jamb. Hand Hand R.H. 75550 P 545.4 SET L.H. 7555 P 545.4 SET R.H. 75695 26D 469.77 SET L.H. 75696 26D 469.77 SET R.H. 75657 32D 545.4 SET L.H. 75658 32D 545.4 SET 4 SETS SET 28 R.H. 7650 P 366.73 SET L.H. 765 P 366.73 SET R.H. 7666 26D 332.40 SET L.H. 7667 26D 332.40 SET 4 SETS SET 28 Set consists of top anchor, intermediate and bottom hinge for beveled ( 8" in 2") edge doors on hinge side application. Anchor Hinge Sets are not available in brite finishes. Set consists of top anchor, intermediate and bottom hinge for square edge door application. Anchor Hinge Sets are not available in brite finishes. s Effective January, 206 AH-2 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Steel Anchor Hinge Bearing TA792 Code 30 5" x 4 2" 27 mm x 4.30 mm Steel Anchor Hinge 4" Door Leg TA794 Code 30 5" x 4 2" 27 mm x 4.30 mm FULL MORTISE ANCHOR HINGE SETS Anchor plate for jamb and door header permits use of surface applied holders and closers. Hand R.H. 75490 P 366.73 SET L.H. 7549 P 366.73 SET R.H. 75492 26D 234.8 SET L.H. 75493 26D 234.8 SET 4 SETS SET 28 Set consists of top anchor, intermediate and bottom hinge for square edge door application. Anchor Hinge Sets are not available in brite finishes. Anchor plate for both jamb and door header permits use of surface applied holders and closers. Hand R.H. 75820 P 440.45 L.H. 7582 P 440.45 R.H. 75836 26D 346.46 L.H. 75837 26D 346.46 4 SETS SET 28 Set consists of top anchor, intermediate and bottom hinge for square edge door application. Anchor Hinge Sets are not available in brite finishes. TA793 Code 30 5" x 4 2" 27 mm x 4.30 mm Steel Heavy Weight Beveled Edge Bearing TA5792 Code 30 5" x 4 2" 27 mm x 4.30 mm Anchor plate for jamb header only, permits the use of holders and closers concealed in top of the door. Hand R.H. 75585 P 427.33 SET L.H. 75586 P 427.33 SET R.H. 7560 26D 332.40 SET L.H. 75602 26D 332.40 SET 4 SETS SET 28 Set consists of top anchor, intermediate and bottom hinge for square edge door application. Anchor Hinge Sets are not available in brite finishes. Anchor plate for jamb and door header permits use of surface applied holders and closers. Hand R.H. 75530 P 366.73 SET L.H. 7553 P 366.73 SET R.H. 75532 26D 234.8 SET L.H. 75533 26D 234.8 SET 4 SETS SET 28 Set consists of top anchor, intermediate and bottom hinge for beveled ( 8" in 2") edge doors on hinge side application. Anchor Hinge Sets are not available in brite finishes. s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. AH-3

FULL MORTISE ANCHOR HINGE SETS Steel Heavy Weight Beveled Edge Bearing TA5793 Code 30 5" x 4 2" 27 mm x 4.30 mm Steel Bearing Hinges For Beveled Edge Doors 4" Door Leg TA5794 Code 30 5" x 4 2" 27 mm x 4.30 mm Anchor plate for jamb header only, permits the use of holders and closers concealed in top of the door. Anchor plate for both jamb and door header permits use of surface applied holders and closers. Hand R.H. 75627 P 427.33 SET L.H. 75628 P 427.33 SET 4 SETS SET 28 R.H. 75554 26D 332.40 SET L.H. 75555 26D 332.40 SET Set consists of top anchor, intermediate and bottom hinge for beveled ( 8" in 2") edge doors on hinge side application. Anchor Hinge Sets are not available in brite finishes. Hand R.H. 75868 P 440.45 L.H. 75869 P 440.45 R.H. 75884 26D 346.46 L.H. 75885 26D 346.46 4 SETS SET 28 Set consists of top anchor, intermediate and bottom hinge for beveled ( 8" in 2") edge doors on hinge side application. Anchor Hinge Sets are not available in brite finishes. s Effective January, 206 AH-4 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Three Knuckle Standard Weight Non-Ferrous Bearing TA374 Code 30 4 2" 4.30 mm 5" 27 mm Three Knuckle Heavy Weight Non-Ferrous Bearing TA384 Code 30 4 2" 4.30 mm 5" 27 mm 74650 P 249.95 74658 AP 249.95 7465 3 249.95 74652 4 249.95 74645 0 249.95 74659 0A 249.95 74646 0B 286.70 74656 26 249.95 74657 26D 249.95 74643 32D 249.95 74669 P 293.69 74677 AP 293.69 74670 3 293.69 7467 4 293.69 74664 0 293.69 74660 0A 293.69 74665 0B 336.89 74675 26 293.69 74676 26D 293.69 74662 32D 293.69 24 3 28 24 3 32 74840 P 302.89 74848 AP 302.89 7484 3 302.89 74842 4 302.89 74835 0 302.89 74849 0A 302.89 24 3 40 74836 0B 347.43 74846 26 302.89 74847 26D 302.89 74833 32D 302.89 74859 P 356.47 74867 AP 356.47 74860 3 356.47 7486 4 356.47 74854 0 356.47 74850 0A 356.47 24 3 47 74855 0B 408.89 74865 26 356.47 74866 26D 356.47 74852 32D 356.47 Continued on next column Three Knuckle Heavy Weight Non-Ferrous Bearing TA384 Continued 6" 52.4 mm for 3 4" 44.4 mm door Steel Three Knuckle Standard Weight Bearing TA774 Code 30 4 2" 4.30 mm 5" 27 mm 74878 P 39.2 74886 AP 39.2 74879 3 39.2 74880 4 39.2 74873 0 39.2 74887 0A 39.2 74874 0B 448.73 74884 26 39.2 74885 26D 39.2 7487 32D 39.2 7449 P 96.69 74492 AP 96.69 74496 3 96.69 74497 4 96.69 74499 0 96.69 74507 0A 96.69 74500 0B 0.89 74503 26 96.69 74504 26D 96.69 7450 P 36.0 745 AP 36.0 7455 3 36.0 7456 4 36.0 7458 0 36.0 74508 0A 36.0 7459 0B 56.00 74522 26 36.0 74523 26D 36.0 Steel Three Knuckle Heavy Weight Bearing TA784 Code 30 4 2" 4.30 mm 7542 P 97.32 7543 AP 97.32 7547 3 97.32 7548 4 97.32 7550 0 97.32 7558 0A 97.32 755 0B 226.33 7554 26 97.32 7555 26D 97.32 8 3 63 24 3 23 24 3 27 3 24 36 Continued on next page HALF MORTISE HINGES s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. HM-

HALF MORTISE HINGES Steel Three Knuckle Heavy Weight Bearing TA784 Continued 5" 27 mm 6" 52.4 mm for 3 4" 44.4 mm door Steel Three Knuckle Heavy Weight Swing Clear TA789 Code 30 5" 27 mm 756 P 230.65 7562 AP 230.65 7566 3 230.65 7567 4 230.65 7569 0 230.65 7577 0A 230.65 7570 0B 264.57 7573 26 230.65 7574 26D 230.65 7580 P 277.32 758 AP 277.32 7585 3 277.32 7586 4 277.32 7588 0 277.32 7596 0A 277.32 7589 0B 38.09 7592 26 277.32 7593 26D 277.32 Hinges are NRP and Reversible. 75330 P 225.95 7533 AP 225.95 75335 3 225.95 75336 4 225.95 75338 0 225.95 75346 0A 225.95 75339 0B 259.7 75342 26 225.95 75343 26D 225.95 3 24 44 3 8 59 24 3 47 Steel Five Knuckle Standard Weight TA2774 Code 50 4 2" 4.30 mm 5" 27 mm 57880 P 3.48 57885 AP 72.52 5788 3 72.52 57888 4 72.52 57883 0 72.52 64989 0A 72.52 64983 0B 83.9 64986 26 72.52 57884 26D 37.94 57955 P 96.25 57959 AP 96.25 57963 3 96.25 57956 4 96.25 57960 0 96.25 65007 0A 96.25 65008 0B 0.40 650 26 96.25 57958 26D 96.25 24 3 23 24 3 27 Standard Weight Five Knuckle Non-Ferrous Bearing TA3374 Code 50 4 2" 4.30 mm 5" 27 mm 6406 P 57.84 642 AP 57.84 6423 3 57.84 6424 4 57.84 643 0 57.84 6405 0A 57.84 647 0B 8.06 64 26 57.84 640 26D 57.84 644 32 57.84 645 32D 57.84 646 P 22.30 644 AP 22.30 6462 3 22.30 6463 4 22.30 6440 0 22.30 6438 0A 22.30 6446 0B 253.85 6467 26 22.30 6468 26D 22.30 6444 32 22.30 6445 32D 22.30 24 3 28 24 3 32 s Effective January, 206 HM-2 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Heavy Weight Non-Ferrous Bearing T4A3384 Code 50 Steel Heavy Weight Bearings T4A3784 Code 50 HALF MORTISE HINGES 4 2" 4.30 mm 5" 27 mm 6" 52.4 mm for 3 4" 44.4 mm door 70775 P 2.74 70782 AP 2.74 70776 3 2.74 70777 4 2.74 664 0 2.74 70783 0A 2.74 6643 0B 242.88 7078 26 2.74 6640 26D 2.74 70770 32 2.74 7077 32D 2.74 70800 P 249.7 70807 AP 249.7 7080 3 249.7 70802 4 249.7 666 0 249.7 70808 0A 249.7 6665 0B 286.44 70806 26 249.7 6660 26D 249.7 6663 32D 249.7 70829 P 27.05 70837 AP 27.05 70830 3 27.05 7083 4 27.05 7084 0 27.05 70824 0A 27.05 70825 0B 30.92 70835 26 27.05 70836 26D 27.05 24 3 40 24 3 40 8 3 63 4 2" 4.30 mm 5" 27 mm 6" 52.4 mm for 3 4" 44.4 mm door 58220 P 38.3 72478 AP 38.3 72482 3 38.3 58222 4 38.3 72484 0 38.3 7249 0A 38.3 72485 0B 58.44 72488 26 38.3 58223 26D 38.3 58240 P 56.89 5824 AP 56.89 7252 3 56.89 7253 4 56.89 7255 0 56.89 72520 0A 56.89 7256 0B 79.96 7259 26 56.89 58242 26D 56.89 58270 P 94.52 72560 AP 94.52 58273 3 94.52 72542 4 94.52 58284 0 94.52 7254 0A 94.52 72544 0B 223.2 72547 26 94.52 58283 26D 94.52 24 3 3 24 3 36 2 3 32 Steel Swing Clear Heavy Weight Bearing T4A3789 Code 30 5" 27 mm 7302 P 79.53 73022 AP 79.53 73026 3 79.53 73027 4 79.53 73029 0 79.53 73037 0A 79.53 73030 0B 205.93 73033 26 79.53 73034 26D 79.53 24 3 47 s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. HM-3

HALF SURFACE HINGES Standard Weight Non-Ferrous Bearing TA372 Code 30 TA2372 Code 50 4 2" 4.30 mm 5" 27 mm Refer to page HS-3 for Back Plates. Heavy Weight Non-Ferrous Bearing TA382 Code 30 7462 P 263.73 74620 AP 263.73 7463 3 263.73 7464 4 263.73 74607 0 263.73 7462 0A 263.73 74608 0B 302.50 7468 26 263.73 7469 26D 263.73 74605 32D 263.73 7463 P 267.08 74639 AP 267.08 74632 3 267.08 74633 4 267.08 74626 0 267.08 74640 0A 267.08 74627 0B 306.35 74637 26 267.08 74638 26D 267.08 74624 32D 267.08 24 3 30 24 3 38 4 2" 4.30 mm 5" 27 mm Refer to page HS-3 for Back Plates. Steel Standard Weight TA772 Code 30 57685 AP 57.64 57686 P 57.64 57687 3 57.64 57688 4 57.64 57689 0 57.64 57690 0B 80.83 5769 26 57.64 57692 26D 57.64 57694 D-3 57.64 57695 D-4 57.64 57696 32D 57.64 24 3 30 57697 32D 64.34 24 3 38 4 2" 4.30 mm 5" 27 mm Refer to page HS- 3 for Back Plates. 74764 P 320.08 74772 AP 320.08 74765 3 320.08 74766 4 320.08 74759 0 320.08 74773 0A 320.08 74760 0B 335.00 74770 26 320.08 7477 26D 320.08 74757 32D 320.08 74783 P 376.07 7479 AP 376.07 74784 3 376.07 74785 4 376.07 74778 0 376.07 74792 0A 376.07 74779 0B 43.38 74789 26 376.07 74790 26D 376.07 74776 32D 376.07 24 3 50 24 3 57 4 2" 4.30 mm 5" 27 mm Refer to page HS-3 for Back Plates. 74453 P 05.89 74454 AP 05.89 74458 3 05.89 74459 4 05.89 7446 0 05.89 74469 0A 05.89 74462 0B 2.46 74465 26 05.89 74466 26D 54.65 74472 P 43.47 74473 AP 43.47 74477 3 43.47 74478 4 43.47 74480 0 43.47 74470 0A 43.47 7448 0B 64.57 74484 26 43.47 74485 26D 43.47 24 3 34 24 3 43 s Effective January, 206 HS- Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Steel Heavy Weight Bearing TA782 Code 30 Steel Standard Weight TA2772 Code 50 HALF SURFACE HINGES 4 2" 4.30 mm 5" 27 mm Refer to page HS-3 for Back Plates. 75066 P 27.45 75067 AP 27.45 7507 3 27.45 75072 4 27.45 75074 0 27.45 75082 0A 27.45 75075 0B 249.43 75078 26 27.45 75079 26D 27.45 75085 P 252.60 75086 AP 252.60 75090 3 252.60 7509 4 252.60 75093 0 252.60 750 0A 252.60 75094 0B 289.76 75097 26 252.60 75098 26D 252.60 24 3 38 24 3 48 Steel Heavy Weight Swing Clear TA796 Code 30 4 2" 4.30 mm 5" 27 mm Refer to page HS-3 for Back Plates. 5770 P 29.7 5779 AP 72.27 5774 3 72.27 5772 4 72.27 5775 0 72.27 57708 0A 72.27 5772 0B 82.90 5776 26 72.27 5777 26D 35.82 57830 P 05.28 57834 AP 05.28 64920 3 05.28 6492 4 05.28 57835 0 05.28 57829 0A 05.28 57839 0B 20.76 64926 26 05.28 57833 26D 47.66 24 3 30 24 3 38 5" 27 mm 75387 P 247.62 75388 AP 247.62 75392 3 247.62 75393 4 247.62 75395 0 247.62 75403 0A 247.62 75396 0B 284.02 75399 26 247.62 75400 26D 247.62 24 3 70 s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. HS-2

HALF SURFACE HINGES HeavyWeightNon-FerrousBearing T4A3382 Code 50 Steel Heavy Weight Bearing T4A3782 Code 50 4 2" 4.30 mm 5" 27 mm 6" 52.4 mm Refer to page HS-3 for Back Plates. HeavyWeightSteelBearing T4A3796 Code 50 70560 P 9.3 6565 AP 9.3 7056 3 9.3 70562 4 9.3 6568 0 9.3 656 0A 9.3 6569 0B 29.45 70566 26 9.3 70567 26D 9.3 6562 32 9.3 6563 32D 73.92 6589 P 26.33 6597 AP 26.33 6590 3 26.33 659 4 26.33 6584 0 26.33 6580 0A 26.33 6585 0B 299.75 6579 26 26.33 6596 26D 26.33 658 32 26.33 6582 32D 26.33 70602 P 369.0 7060 AP 369.0 70603 3 369.0 70604 4 369.0 6604 0 369.0 706 0A 369.0 6605 0B 423.27 70608 26 369.0 70609 26D 369.0 24 3 50 24 3 57 8 3 66 4 2" 5805 P 90.53 4.30 mm 5802 AP 5.00 580 3 5.00 58 4 5.00 5806 0 5.00 5820 0A 5.00 5808 0B 73.2 588 26 5.00 5807 26D 82.30 5" 5845 P 7.83 27 mm 5847 AP 7.83 72280 3 7.83 7228 4 7.83 5846 0 7.83 5849 0A 7.83 72283 0B 97. 72286 26 7.83 72287 26D 98.04 6" 5880 P 2.33 52.4 mm 5879 AP 2.33 for 72297 3 2.33 3 4" 72298 4 2.33 44.4 mm door 72300 0 2.33 5883 0A 2.33 7230 0B 242.4 72304 26 2.33 588 26D 38.97 Refer to page HS-3 for Back Plates. Steel Back Plates BP-0 BP- BP-2 Code 50 24 3 38 24 3 48 2 3 43 Product 5" 27 mm 73509 P 65.85 7350 AP 65.85 7354 3 65.85 7355 4 65.85 7357 0 65.85 73525 0A 65.85 7358 0B 90.23 7352 26 65.85 73522 26D 89.70 2 35 4 2" 4.30 mm 5" 27 mm 5" 27 mm 4 2" 4.30 mm BP-0 (TA2772) (T4A3782) BP- (T4A3797) BP-2 (572) 6324 P 0.30 63242 0 0.30 63243 0B.63 63240 26D 6.20 63248 P 0.89 63249 0 0.89 63247 26D 9.25 63256 P 0.89 63257 0 0.89 63255 26D 0.89 AS ORDERED AS ORDERED AS ORDERED 5593 26D 0.30 AS ORDERED s Effective January, 206 HS-3 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Standard Weight 3 Knuckle Non- Ferrous Bearing TA37 Code 30 Steel Standard Weight 3 Knuckle Bearing TA77 Code 30 FULL SURFACE HINGES 4 2" 4.30 mm 5" 27 mm 74555 P 249.95 74563 AP 249.95 74556 3 249.95 74557 4 249.95 74550 0 249.95 74564 0A 249.95 7455 0B 286.70 7456 26 249.95 74562 26D 249.95 74548 32D 249.95 74574 P 253.4 74582 AP 253.4 74575 3 253.4 74576 4 253.4 74569 0 253.4 74584 0A 253.4 74570 0B 290.37 74580 26 253.4 7458 26D 253.4 74567 32D 253.4 24 3 34 24 3 43 4 2" 4.30 mm 5" 27 mm 74396 P 85.09 74397 AP 85.09 7440 3 85.09 74402 4 85.09 74404 0 85.09 7442 0A 85.09 74405 0B 97.60 74408 26 85.09 74409 26D 85.09 7445 P 34.33 7446 AP 34.33 74420 3 34.33 7442 4 34.33 74423 0 34.33 7443 0A 34.33 74424 0B 54.08 74427 26 34.33 74428 26D 34.33 24 3 27 24 3 35 Heavy Weight 3 Knuckle Non-Ferrous Bearing TA38 Code 30 Steel Heavy Weight 3 Knuckle Bearing TA78 Code 30 4 2" 4.30 mm 5" 27 mm 74707 P 268.54 7475 AP 268.54 74708 3 268.54 74709 4 268.54 74702 0 268.54 7476 0A 268.54 74703 0B 308.03 7473 26 268.54 7474 26D 268.54 74700 32D 268.54 74726 P 353.40 74734 AP 353.40 74727 3 353.40 74728 4 353.40 7472 0 353.40 74735 0A 353.40 74722 0B 405.36 74732 26 353.40 74733 26D 353.40 7479 32D 353.40 24 3 46 24 3 62 4 2" 4.30 mm 5" 27 mm 75009 P 203.6 7500 AP 203.6 7504 3 203.6 7505 4 203.6 7507 0 203.6 75025 0A 203.6 7508 0B 233.55 7502 26 203.6 75022 26D 203.6 75028 P 236.47 75029 AP 236.47 75033 3 236.47 75034 4 236.47 75036 0 236.47 75044 0A 236.47 75037 0B 27.25 75040 26 236.47 7504 26D 236.47 24 3 37 24 3 44 s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. FS-

FULL SURFACE HINGES Steel Swing Clear Heavy Weight 3 Knuckle Bearing TA797 Code 30 Steel Standard Weight 5 Knuckle Bearing TA277 Code 50 5" 27 mm Heavy Weight 5 Knuckle Non-Ferrous Bearing T4A338 Code 50 4 2" 4.30 mm 5" 27 mm 6" 52.40 mm 75406 P 23.64 75407 AP 23.64 754 3 23.64 7542 4 23.64 7544 0 23.64 75422 0A 23.64 7545 0B 265.70 7548 26 23.64 7549 26D 23.64 655 P 80.82 658 AP 80.82 65 3 80.82 657 4 80.82 650 0 80.82 6506 0A 80.82 656 0B 207.42 6850 26 80.82 68502 26D 80.82 6507 32 80.82 6508 32D 80.82 63250 P 247.69 6325 AP 247.69 63252 3 247.69 6528 4 247.69 6520 0 247.69 63253 0A 247.69 659 0B 284. 63254 26 247.69 652 26D 247.69 6522 32 247.69 6523 32D 247.69 63283 P 269.7 6329 AP 269.7 63284 3 269.7 63285 4 269.7 63278 0 269.7 63292 0A 269.7 63279 0B 308.75 63289 26 269.7 63290 26D 269.7 24 3 64 24 3 46 24 3 62 8 3 67 4 2" 4.30 mm 5" 27 mm Steel Heavy Weight Bearing T4A378 Code 50 4 2" 4.30 mm 5" 27 mm 6" 52.40 mm 57525 P 62.7 57529 AP 62.7 5758 3 62.7 5759 4 62.7 57528 0 62.7 57534 0A 62.7 57530 0B 7.93 57524 26 62.7 57533 26D 57.0 57575 P 96.60 57572 AP 96.60 57578 3 96.60 57579 4 96.60 57576 0 96.60 57584 0A 96.60 57582 0B 0.8 57573 26 96.60 57577 26D 96.60 58065 P 38.3 58062 AP 38.3 7288 3 38.3 7289 4 38.3 729 0 38.3 7298 0A 38.3 7292 0B 58.44 7295 26 38.3 58066 26D 38.3 58075 P 56.89 7227 AP 56.89 7222 3 56.89 58076 4 56.89 72223 0 56.89 7223 0A 56.89 72224 0B 79.96 72227 26 56.89 72228 26D 56.89 58090 P 94.43 58092 AP 94.43 7225 3 94.43 72252 4 94.43 72254 0 94.43 72262 0A 94.43 72255 0B 223.0 72258 26 94.43 72259 26D 94.43 24 3 27 24 3 35 24 3 37 24 3 44 8 3 48 s Effective January, 206 FS-2 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Steel Standard Weight Full Mortise Single Acting 502 Code 7 C US LISTED SPRING HINGES 4" x 4" 0.60 mm x 0.60 mm 4 2" x 4" 4.30 mm x 0.60 mm 5593 P 5.38 55902 AP 2.7 55908 3 2.7 55903 4 2.7 55904 0 2.7 55928 0A 2.7 55905 0B 22.06 559 26 2.7 55907 26D 4.34 5590 D3 2.7 55929 D4 2.7 56002 P 24.56 56003 AP 3.59 5600 3 3.59 56004 4 3.59 56005 0 3.59 5603 0A 3.59 56006 0B 36.23 56009 26 28.7 56008 26D 22.33 5600 D3 3.59 56032 D4 3.59 56007 5 22.33 560 9 3.59 5602 4 3.59 48 3 40 48 3 54 4 2" x 4 2" 5607 P 5.89 4.30 mm x 4.30 mm 5608 AP 28.38 56025 3 25.80 5609 4 25.80 56020 0 25.80 56030 0A 25.80 5602 0B 29.58 5602E 0BE 24. 56024 26 25.80 56023 26D 2.63 5606 D3 28.38 5605 D4 28.38 56022 5 2.63 56026 9 28.38 56027 4 28.38 Reverse Spring 502R Code 7 48 3 54 4 2" x 4 2" 56034 P 30.89 4.30 mm x 4.30 mm 48 3 54 56035 26D 36.63 For other finishes of 502 R add $5.00 to the 502 price. 502 x TRS Option $3.35. NOTE: Consult the Factory for information on our 502 with new Security Feature. 522 Code 7 No. Fin. Per Set 4 2" x 4" 5598 P 73.68 SET 4.30 mm x 0.60 mm 55982 AP 94.77 SET 55989 3 94.77 SET 55983 4 94.77 SET 55984 0 94.77 SET 55993 0A 94.77 SET 55985 0B 98.82 SET 55988 26 94.77 SET 55987 26D 73.68 SET 55980 D3 94.77 SET 55994 D4 94.77 SET 55986 5 73.68 SET 55990 9 94.77 SET 5599 4 94.77 SET C US LISTED Set 6 SETS SET 54 Stainless Steel Standard Weight 552 Code 7 No. Fin. Per Set 4 2" x 4 2" 5604 P 47.67 SET 4.30 mm x 4.30 mm 56042 AP 83.97 SET 56049 3 83.97 SET 56043 4 83.97 SET 56044 0 83.97 SET 56038 0A 83.97 SET 56045 0B 96.3 SET 56048 26 83.97 SET 56047 26D 63.85 SET 56040 D3 83.97 SET 56039 D4 83.97 SET 56046 5 63.85 SET 56050 9 83.97 SET 5605 4 83.97 SET 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4 2" 4.30 mm x 4.30 mm Set 6 SETS SET 54 56056 32D 67.24 EA. 48 3 54 56080 32D 54.0 EA. 48 3 56 Allen Wrench set for 502 / 522 / 552 / 572 Spring Hinges MK08808B @ $2.25 per set s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. SH-

SPRING HINGES Steel Standard Weight Half Surface Single Acting 572 Code 7 4 2" 4.30 mm 4 2" x 4" 4.30 mm x 0.60 mm 4 2" x 4 2" 4.30 mm x 4.30 mm 4 2" x 4 2" 4.30 mm x 4.30 mm Fin. C US LISTED Refer to page HS-3 for BP-2 Backplate. MPS60 Code 57 56090 26D 55.99 24 3 30 MPS679 Code 57 76388 5 6.63 48 3 54 76380 P 6.27 76385 5 6.63 76378 26D 6.63 MK0379 Code 57 Cross pin for MPS60 0.25 ea. Wrench is 0.50 ea. MacPro Spring Hinges C US LISTED C US LISTED Set includes 2 Spring Hinges and Bearing Hinge. No. Fin. Steel Door Spring Adjustable Tension Code 72 Per Set Set 48 3 54 76379 26D 6.4 6 SETS SET 30 9" 228.6 mm 45 5537 D4 0.63 EA. 50 53 "279.4mm 452 5538 D4 2.83 EA. 25 34 3"330.2mm 453 5540 D4 4.8 EA. 25 38 Steel Full Mortise Double Acting Simplex Butt 00 Code 72 3" 72.20 mm 4" 0.60 mm 5" 27 mm 6" 52.4 mm 6" x 4 2" 52.4 mm x 4.30 mm 55582 P 30.8 5558 D 30.8 55585 2C 37.54 55587 3 42.3 55583 4 37.54 55584 0 37.54 55590 26 54.9 55588 26D 47.92 55633 P 3.79 55632 D 3.79 55636 2C 39.93 55638 3 44.56 55634 4 39.93 55635 0 39.93 55642 0A 57.55 5564 26 57.55 55639 26D 50.96 55673 P 44.25 55677 AP 48.36 55672 D 44.25 55676 2C 54.95 55678 3 6.55 55674 4 54.95 55675 0 54.95 55680 26 79.40 5568 26D 70.4 5572 P 48.36 557 D 48.57 5575 2C 6.00 5577 3 68.4 5573 4 6.00 5574 0 6.00 5572 0A 87.63 5579 26 87.63 55720 26D 77.45 5575 P 54.9 55758 D 54.9 55752 2C 67.62 55762 3 72.57 55756 4 67.62 55755 0 67.62 55760 0A 97.25 5576 26 97.25 55754 26D 86.0 Steel Full Mortise Double Acting Simplex Butt Non-Template 900 Code 72 See page SH-4 for replacement parts. 8" 203.2 mm 58265 P 90.33 58267 AP 99.72 58264 D 90.33 58266 2C.7 58273 3 27.4 58274 4.7 58275 0.7 58277 0A 63.65 58272 26 63.65 58262 26D 43.73 40 2 50 24 2 45 6 2 53 2 2 56 2 2 55 2 7 s Effective January, 206 SH-2 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Steel Full Mortise Double Acting Simplex Clamp Flange Butt 900 Code 72 HS00 Code 72 SPRING HINGES 8" 203.2 mm 5933 P 30.75 5934 AP 4.78 5937 D 30.75 59333 2C 62.7 59337 3 84.46 59335 4 62.7 59336 0 62.7 59338 0A 234.27 59340 26 234.27 59322 26D 209.95 See page SH-4 for replacement parts. 2 23 3" 76.20 mm 4" 0.60 mm 55787 P 30.8 55795 AP 33.3 55786 D 30.8 55788 2C 37.54 55792 3 42.4 55790 4 37.54 5579 0 37.54 55796 0A 54.9 55797 26 54.9 55794 26D 47.92 55824 P 3.79 55833 AP 32.34 55823 D 3.79 55825 2C 39.93 55828 3 44.56 55832 4 39.93 55830 0 39.93 55834 0A 57.55 55835 26 57.55 5583 26D 50.96 See page SH-4 for replacement parts. 20 2 26 20 2 37 Ajax Double Acting Horizontal Pivot Hinge 300 Code 72 Ajax Double Acting Horizontal Pivot Hinge With Jamb Attaching Plate J300 Code 72 57076 P 6.32 57080 D 6.32 5708 2C 67.39 57079 3 83.52 57077 4 75.6 57078 0 67.39 57085 0A 98.54 57086 26 98.54 57084 26D 88.59 8 SET 29 300 / J300 SERIES each net TOP PIVOT & SOCKET 9.25 JAMB ATTACHING PLATE* 5.70 SIDE PLATE* 22.35 BACK PLATE* 2.85 *Specify finish when ordering. For concrete or tile floor installation 576 P 60.26 5724 D 66.3 579 2C 73.67 5720 3 89.45 577 4 73.67 578 0 73.67 572 0A 08.5 5723 26 08.5 5722 26D 95.95 0 SET 33 s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. SH-3

SPRING HINGES Ajax Double Acting Horizontal Pivot Hinge 4007RB Code 72 Reversed Brackets 8007 Code 72 4007-MRB Code 72 5737 P 2.9 57376 D 2.9 57373 2C 64.84 57378 3 20.30 57377 4 64.84 57374 0 64.84 57375 0A 256.04 57379 26 256.04 57372 26D 229.85 0 SET 35 Mortised and Reversed Brackets H8007 Code 72 582 P 32.3 586 D 32.3 584 2C 40.34 585 3 45.76 58 4 40.34 583 0 40.34 589 0A 57.76 5809 26 57.76 588 26D 53.56 20 SET 25 57403 P 2.9 5742 D 2.9 57405 2C 64.84 57407 3 20.30 57408 4 64.84 57404 0 64.84 57409 0A 256.04 574 26 256.04 57406 26D 229.74 0 SET 35 5852 P 37.54 5857 D 37.54 5854 2C 47.28 5855 3 55.39 5856 4 37.44 5853 0 37.44 5858 0A 69.98 5860 26 69.98 585 26D 65.44 20 SET 25 4007RB/4007-MRB Series Replacement s TENSION PIN.75 SPRING 5.80 NYLON BUSHINGS.5 TENSION RODS.55 No replacement parts are available. *Specify part number, size and finish when ordering. REPLACEMENT PARTS FOR DOUBLE ACTING SPRING HINGES AND PIVOTS McKINNEY Description 00 00 00 00 00 900 900 Needed 3" 4" 5" 6" 6x4 2" 8" 8" Required Per Hinge T53 - Spring 2.83.83.83.83 9.64 23.77 39.32 T56 Tension Pin 2 2.04 2.04 2.04 2.09 2.09 2.09 2.24 TS550 Solid Metal Cap X 4.2.2.2 6.73 6.73 2.57 2.57 TS50 Loose Knob X 2 3.52 3.52 3.52 4.44 4.44 5.46 5.46 TS520 Fast Knob 2 3.52 3.26 3.6 4.44 4.44 5.46 5.4 TS525 Pawlnut X 4 x x x x 4.6 x x TS530 Tension Lever 2.04 2.04 2.04 2.09 2.09 2.09 2.30 TS540 Plug X x x x 5.4 5.4 x x s Effective January, 206 SH-4 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

EP-5J Code 63336 P 24.5 SET 20 SET 38 63338 0 24.5 SET 20 SET 38 63346 26D 83.06 SET 20 SET 38 RESCUE HARDWARE EP-5J Top Pivot and Socket 58.40 EP-5J Bottom Bracket and Bottom Door Socket 59.50 Screws for EP-5J.50 ea For Cylindrical or Bored Locks CSS-9 Code May not work with mortise locks. Consult the factory for mortise lock application. Not for use with deadbolt and Plunger Assembly for DS-6 or CSS-9 60.35 only 8.25 Springs only.35 Emergency Door Stop DS-6 Code 5 3 4" 46 mm Center Hung 63309 0 40.54 Center Hung 63330 26D 97.4 Offset Hung 6330 0 40.54 Offset Hung 63332 26D 97.4 5 7 8" 49.225 mm Center Hung 6334 0 40.54 Center Hung 6333 26D 97.4 Offset Hung 63294 0 40.54 Offset Hung 63293 26D 97.4 6 3 4" 7.40 mm Center Hung 6333 26D 6.4 Offset Hung 6332 0 6.60 Offset Hung 63329 26D 6.4 Custom s 63350 76.00 AS ORDERED AS ORDERED AS ORDERED 63337 0 32.8 20 2 63345 26D 70.59 20 2 Consult the factory for availability of custom sizes Custom Engineering and Set Up charges may apply Double Lipped Strike DLS-8 Code 5 3 4" 46 mm Center Hung 63260 0 66.83 Center Hung 6335 26D 53.49 AS ORDERED May not work with mortise locks. Consult the factory for mortise lock application. Not for use with deadbolt Consult the factory for availability of custom sizes Custom Engineering and Set Up charges may apply 5 3 4" 46 mm Offset Hung 6337 0 66.83 Offset Hung 6339 26D 53.49 AS ORDERED 6 3 4" 7.40 mm Center Hung 63263 0 73.64 Center Hung 6336 26D 59.9 AS ORDERED 6 3 4" 7.40 mm Offset Hung 6338 0 73.64 Offset Hung 63320 26D 59.9 AS ORDERED Custom s 6335 74.80 s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. RH-

SPECIALTY HINGES Raised Barrel Code 50 4 2" x 4 2" 4.30 mm x 4.30 mm Pocket Hinge PH-4 Code For Narrow Stile 55957 RBTA274 58436 RBT4A3786 6353 P 299.0 63533 3 299.0 63535 0 299.0 63537 0B 342.99 63538 26 299.0 63539 26D 54.79 26D 42.33 3 48 55 26D 6.4 3 24 35 AS ORDERED StormPro Tornado Resistant Hinges SP3386 Code 50 4 2" x 4 2" 4.30 mm x 4.30 mm 5" x 4 2" 27 mm x 4.30 mm 4 2" x 4 2" 4.30 mm x 4.30 mm 5" x 4 2" 27 mm x 4.30 mm SP3786 Code 50 73972 32D 09.63 3 24 37 73982 32D.06 3 24 43 73970 P 49.86 3 24 35 7397 26D 54.08 3 24 35 73980 P 57.43 3 24 4 7398 26D 60.4 3 24 4 All StormPro products should be ordered as a complete integrated unit including the frame and door along with other StormPro hardware. Storm- Pro hinges are a required component of the certified StormPro system Interim Hinges Code 50 Door or Frame Leaf Opposite Leaf Trimmed To: 5" 4½" 57470 TA274 26D 37.03 57480 T4A3786 26D 63.24 57475 T4A3386 32D 27.50 For finishes not listed, use $2.00 over 26D price All interim hinges are supplied with NRP set screw and nohole plugs which allow them to be reversible. Leaves are trimmed the same dimension from the top and bottom of that leaf - otherwise a complete special must be manufactured, check for existence of available special part numbers which may have previously been manufactured Specialty Hinges & Residential 400 Code 4 Staggered Hole Pattern on 4" x 4" 44 Code 4 /4" Radius Staggered Hole Pattern on 4" x 4" 458 Code 4 5/8" Radius Staggered Hole Pattern on 4" x 4" Residential Hinges available only in finishes shown above. Contract Grade Hinge Discount does not apply to Residential Grade Hinges. NOTE: Unlisted finishes for residential hinges P.O.A. Consult the Factory on minimum requirements. 3 2" x 3 2" 88.90 mm x 88.90 mm 4" x 4" 0.60 mm x 0.60 mm 3 2" x 3 2" 88.90 mm x 88.90 mm 4" x 4" 0.60 mm x 0.60 mm 3 2" x 3 2" 88.90 mm x 88.90 mm 4" x 4" 0.60 mm x 0.60 mm 56695 3 2.79 56689 4 2.39 56683 0B* 2.79 56692 26 2.79 56288 26D 2.26 56737 0B* 2.89 56748 26D 2.49 56722 3 2.89 5685 4 2.49 5676 0B* 2.89 5679 26 2.89 5682 26D 2.26 56775 3 2.89 56768 4 2.59 56769 0B* 2.89 56772 26 2.89 56773 26D 2.59 56870 3 2.89 56865 4 2.49 5686 0B* 2.89 56867 26 2.89 56868 26D 2.26 5695 0B* 2.89 56922 26D 2.59 *Residential grade 0B. 50 2 26 50 2 26 50 2 26 50 2 52 50 2 26 50 2 52 s Effective January, 206 SP- Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

2-Knuckle Architectural Hinges Code 20 *GT and LT tips not available in D4 and 0BE finishes. For options not offered in price book, contact factory. 2-Knuckle Hinges are handed RH or LH DESIGNER HARDWARE FT RT GT* LT* LH RH 78000 7800 Tip Prefix FT GT LT RT Hinge Hinge Type T273 4" x 4" 0.60 mm x 0.60 mm Hinge Hinge Tips Book D4 x US4 28.95 D4 x US5 28.95 D4 x US26 28.95 D4 x US26D 28.95 D4 x D4 28.95 0BE x 0BE 25.37 US4 x D4 32.0 US5 x D4 29.85 US26 x D4 32.0 US26D x D4 29.85 US4 x US4 32.0 US4 x US5 32.0 US5 x US4 29.85 US5 x US5 29.85 US26 x US26D 32.0 US26D x US26 29.85 US26 x US26 32.0 US26D x US26D 29.85 LH RH 7800 780 Tip Prefix FT GT LT RT Hinge Hinge Type TA273 4 2" x 4" 4.30 mm x 0.60 mm Hinge Hinge Tips Book D4 x US4 4.5 D4 x US5 4.5 D4 x US26 4.5 D4 x US26D 4.5 D4 x D4 4.5 0BE x 0BE 37.04 US4 x D4 49.45 US5 x D4 43.50 US26 x D4 49.45 US26D x D4 43.50 US4 x US4 49.45 US4 x US5 49.45 US5 x US4 43.50 US5 x US5 43.50 US26 x US26D 49.45 US26D x US26 43.50 US26 x US26 49.45 US26D x US26D 43.50 LH RH 78002 78003 Tip Prefix FT GT LT RT Hinge Hinge Type T273 4 2" x 4" 4.30 mm x 0.60 mm Hinge Hinge Tips Book D4 x US4 28.95 D4 x US5 28.95 D4 x US26 28.95 D4 x US26D 28.95 D4 x D4 28.95 0BE x 0BE 27.24 US4 x D4 34.75 US5 x D4 32.05 US26 x D4 34.75 US26D x D4 32.05 US4 x US4 34.75 US4 x US5 34.75 US5 x US4 32.05 US5 x US5 32.05 US26 x US26D 34.75 US26D x US26 32.05 US26 x US26 34.75 US26D x US26D 32.05 LH RH 7802 7803 Tip Prefix FT GT LT RT Hinge Hinge Type TA273 4 2" x 4 2" 4.30 mm x 4.30 mm Hinge Hinge Tips Book D4 x US4 4.5 D4 x US5 4.5 D4 x US26 4.5 D4 x US26D 4.5 D4 x D4 4.5 0BE x 0BE 37.04 US4 x D4 49.45 US5 x D4 43.50 US26 x D4 49.45 US26D x D4 43.50 US4 x US4 49.45 US4 x US5 49.45 US5 x US4 43.50 US5 x US5 43.50 US26 x US26D 49.45 US26D x US26 43.50 US26 x US26 49.45 US26D x US26D 43.50 LH RH 78004 78005 Tip Prefix FT GT LT RT Hinge Hinge Type T273 4 2" x 4 2" 4.30 mm x 4.30 mm 73005 - Deco Tip Kit 26.50 Hinge Hinge Tips Book D4 x US4 28.95 D4 x US5 28.95 D4 x US26 28.95 D4 x US26D 28.95 D4 x D4 28.95 0BE x 0BE 25.37 US4 x D4 32.0 US5 x D4 29.85 US26 x D4 32.0 US26D x D4 29.85 US4 x US4 32.0 US4 x US5 32.0 US5 x US4 29.85 US5 x US5 29.85 US26 x US26D 32.0 US26D x US26 29.85 US26 x US26 32.0 US26D x US26D 29.85 LH RH 7804 7805 Tip Prefix FT GT LT RT Hinge Hinge Type TA273 5" x 5" 27 mm x 27 mm Hinge Hinge Tips Book D4 x US4 57.25 D4 x US5 57.25 D4 x US26 57.25 D4 x US26D 57.25 D4 x D4 57.25 0BE x 0BE 52.53 US4 x D4 69.50 US5 x D4 6.80 US26 x D4 69.50 US26D x D4 6.80 US4 x US4 69.50 US4 x US5 69.50 US5 x US4 6.80 US5 x US5 6.80 US26 x US26D 69.50 US26D x US26 6.80 US26 x US26 69.50 US26D x US26D 6.80 s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. DH-

DESIGNER HARDWARE 3-Knuckle Architectural Hinges Code 30 *GT and LT tips not available in D4 and 0BE finishes.for options not offered in price book, contact factory. FT RT GT* LT* Hinge Hinge Tips Book Hinge Hinge Tips Book Tip Prefix FT GT LT RT 7806 Hinge Hinge Type T74 4" x 4" 0.60 mm x 0.60 mm D4 x US4 6.09 D4 x US5 6.09 D4 x US26 6.09 D4 x US26D 6.09 D4 x D4 6.09 0BE x 0BE 6.09 US4 x D4 7.5 US5 x D4 6.08 US26 x D4 7.5 US26D x D4 6.08 US4 x US4 7.5 US4 x US5 6.08 US5 x US4 6.09 US5 x US5 6.08 US26 x US26D 7.5 US26D x US26 6.08 US26 x US26 7.5 US26D x US26D 6.08 Tip Prefix FT GT LT RT 7809 Hinge Hinge Type T74 5" x 5" 27 mm x 27 mm D4 x US4 30.47 D4 x US5 30.47 D4 x US26 30.47 D4 x US26D 30.47 D4 x D4 30.47 0BE x 0BE 30.47 US4 x D4 38.35 US5 x D4 3.28 US26 x D4 38.35 US26D x D4 3.28 US4 x US4 38.35 US4 x US5 3.28 US5 x US4 3.28 US5 x US5 3.28 US26 x US26D 38.35 US26D x US26 3.28 US26 x US26 38.35 US26D x US26D 3.28 Tip Prefix FT GT LT RT 7807 Hinge Hinge Type T74 4 2" x 4" 4.30 mm x 0.60 mm Hinge Hinge Tips Book D4 x US4 8.53 D4 x US5 8.53 D4 x US26 8.53 D4 x US26D 8.53 D4 x D4 8.53 0BE x 0BE 8.53 US4 x D4 9.68 US5 x D4 7.95 US26 x D4 9.68 US26D x D4 7.95 US4 x US4 9.68 US4 x US5 7.95 US5 x US4 8.53 US5 x US5 7.95 US26 x US26D 9.68 US26D x US26 7.95 US26 x US26 9.68 US26D x US26D 7.95 Tip Prefix FT GT LT RT 78020 Hinge Hinge Type TA74 4" x 4" 0.60 mm x 0.60 mm Hinge Hinge Tips Book D4 x US4 25.92 D4 x US5 25.92 D4 x US26 25.92 D4 x US26D 25.92 D4 x D4 25.92 0BE x 0BE 25.92 US4 x D4 28.93 US5 x D4 23.30 US26 x D4 28.93 US26D x D4 23.30 US4 x US4 28.93 US4 x US5 23.30 US5 x US4 23.30 US5 x US5 23.30 US26 x US26D 28.93 US26D x US26 23.30 US26 x US26 28.93 US26D x US26D 23.30 Tip Prefix FT GT LT RT 7808 Hinge Hinge Type T74 4 2" x 4 2" 4.30 mm x 4.30 mm Hinge Hinge Tips Book D4 x US4 8.53 D4 x US5 8.53 D4 x US26 8.53 D4 x US26D 8.53 D4 x D4 8.53 0BE x 0BE 8.53 US4 x D4 9.68 US5 x D4 7.95 US26 x D4 9.68 US26D x D4 7.95 US4 x US4 9.68 US4 x US5 7.95 US5 x US4 7.95 US5 x US5 7.95 US26 x US26D 9.68 US26D x US26 7.95 US26 x US26 9.68 US26D x US26D 7.95 Tip Prefix FT GT LT RT 7802 Hinge Hinge Type TA74 4 2" x 4" 4.30 mm x 0.60 mm Hinge Hinge Tips Book D4 x US4 26.33 D4 x US5 26.33 D4 x US26 26.33 D4 x US26D 26.33 D4 x D4 26.33 0BE x 0BE 26.33 US4 x D4 27.8 US5 x D4 24.64 US26 x D4 27.8 US26D x D4 24.64 US4 x US4 27.8 US4 x US5 24.64 US5 x US4 24.64 US5 x US5 24.64 US26 x US26D 27.8 US26D x US26 24.64 US26 x US26 27.8 US26D x US26D 24.64 s Effective January, 206 DH-2 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

3-Knuckle Architectural Hinges Code 30 Tip Prefix FT GT LT RT 78022 Hinge Hinge Type TA74 4 2" x 4 2" 4.30 mm x 4.30 mm Tip Prefix FT GT LT RT 78023 Hinge Hinge Type TA74 5" x 5" 27 mm x 27 mm Hinge Hinge Hinge Hinge Tips Tips Book D4 x US4 26.33 D4 x US5 26.33 D4 x US26 26.33 D4 x US26D 26.33 D4 x D4 26.33 0BE x 0BE 26.33 US4 x D4 27.8 US5 x D4 24.64 US26 x D4 27.8 US26D x D4 24.64 US4 x US4 27.8 US4 x US5 24.64 US5 x US4 24.64 US5 x US5 24.64 US26 x US26D 27.8 US26D x US26 24.64 US26 x US26 27.8 US26D x US26D 24.64 Book D4 x US4 37.05 D4 x US5 37.05 D4 x US26 37.05 D4 x US26D 37.05 D4 x D4 37.05 0BE x 0BE 37.05 US4 x D4 4.84 US5 x D4 39.00 US26 x D4 4.84 US26D x D4 39.00 US4 x US4 4.84 US4 x US5 39.00 US5 x US4 39.00 US5 x US5 39.00 US26 x US26D 4.84 US26D x US26 39.00 US26 x US26 4.84 US26D x US26D 39.00 *GT and LT tips not available in D4 and 0BE finishes. For options not offered in price book, contact factory. Hinge Hinge Tips Book D4 x US4 49.80 D4 x US5 49.80 D4 x US26 49.80 D4 x US26D 49.80 Hinge D4 x D4 49.80 Type 0BE x 0BE 49.80 US3 x US3 44.05 US4 x D4 49.80 TA786 US5 x D4 44.05 US26 x D4 49.80 US26D x D4 44.05 Hinge US4 x US5 49.80 US5 x US4 44.05 US4 x US4 49.80 US5 x US5 44.05 US26 x US26D 49.80 US26D x US26 44.05 US26 x US26 49.80 US26D x US26D 44.05 Hinge Hinge Tips Book Order by Description Tip Prefix FT 4 2" x 4 2" 4.30 mm x 4.30 mm Order by Description Tip Prefix FT Hinge Hinge Type TA786 5" x 5" 27 mm x 27 mm D4 x US4 60.95 D4 x US5 60.95 D4 x US26 60.95 D4 x US26D 60.95 D4 x D4 60.95 0BE x 0BE 60.95 US4 x D4 60.95 US5 x D4 58.0 US26 x D4 60.95 US26D x D4 58.0 US4 x US5 60.95 US5 x US4 58.0 US4 x US4 60.95 US5 x US5 58.0 US26 x US26D 60.95 US26D x US26 58.0 US26 x US26 60.95 US26D x US26D 58.0 DESIGNER HARDWARE 5-Knuckle Architectural Hinges Code 50 5-Knuckle Architectural Hinges only available with Standard Pin and Plug. For options not offered in price book, contact factory. 78024 Hinge Type T274 Hinge 4" x 4" 0.60 mm x 0.60 mm Hinge Hinge Tips Book D4 x US4 6.09 D4 x US5 6.09 D4 x US26 6.09 D4 x US26D 6.09 D4 x D4 6.09 0BE x 0BE 6.09 US4 D4 7.5 US5 x D4 6.08 US26 x D4 7.5 US26D x D4 6.08 US4 x US4 7.5 US4 x US5 6.08 US5 x US4 7.5 US5 x US5 6.08 US26 x US26D 7.5 US26D x US26 6.08 US26 x US26 7.5 US26D x US26D 6.08 78025 Hinge Type T274 Hinge 4 2" x 4" 4.30 mm x 0.60 mm Hinge Hinge Tips Book D4 x US4 8.53 D4 x US5 8.53 D4 x US26 8.53 D4 x US26D 8.53 D4 x D4 8.53 0BE x 0BE 8.53 US4 x D4 9.68 US5 x D4 7.95 US26 x D4 9.68 US26D x D4 7.95 US4 x US4 9.68 US4 x US5 7.95 US5 x US4 7.95 US5 x US5 7.95 US26 x US26D 9.68 US26D x US26 7.95 US26 x US26 9.68 US26D x US26D 7.95 Continued on next page s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. DH-3

DESIGNER HARDWARE 5-Knuckle Architectural Hinges (Continued) Code 50 5-Knuckle Architectural Hinges only available with Standard Pin and Plug. For options not offered in price book, contact factory. 78026 Hinge Type T274 Hinge 4 2" x 4 2" 4.30 mm x 4.30 mm Hinge Hinge Tips Book D4 x US4 8.53 D4 x US5 8.53 D4 x US26 8.53 D4 x US26D 8.53 D4 x D4 8.53 0BE x 0BE 8.53 US4 x D4 9.68 US5 x D4 7.95 US26 x D4 9.68 US26D x D4 7.95 US4 x US4 9.68 US4 x US5 7.95 US5 x US4 7.95 US5 x US5 7.95 US26 x US26D 9.68 US26D x US26 7.95 US26 x US26 9.68 US26D x US26D 7.95 78027 Hinge Type T274 Hinge 5" x 5" 27 mm x 27 mm Hinge Hinge Tips Book D4 x US4 30.47 D4 x US5 30.47 D4 x US26 30.47 D4 x US26D 30.47 D4 x D4 30.47 0BE x 0BE 30.47 US4 x D4 38.35 US5 x D4 3.28 US26 x D4 38.35 US26D x D4 3.28 US4 x US4 38.35 US4 x US5 3.28 US5 x US4 3.28 US5 x US5 3.28 US26 x US26D 38.35 US26D x US26 3.28 US26 x US26 38.35 US26D x US26D 3.28 78028 Hinge Type TA274 Hinge 4" x 4" 0.60 mm x 0.60 mm Hinge Hinge Tips Book D4 x US4 25.92 D4 x US5 25.92 D4 x US26 25.92 D4 x US26D 25.92 D4 x D4 25.92 0BE x 0BE 25.92 US4 x D4 28.93 US5 x D4 23.30 US26 x D4 28.93 US26D x D4 23.30 US4 x US4 28.93 US4 x US5 23.30 US5 x US4 23.30 US5 x US5 23.30 US26 x US26D 28.93 US26D x US26 23.30 US26 x US26 28.93 US26D x US26D 23.30 78030 Hinge Type TA274 Hinge 4 2" x 4 2" 4.30 mm x 4.30 mm Hinge Hinge Tips Book D4 x US4 26.33 D4 x US5 26.33 D4 x US26 26.33 D4 x US26D 26.33 D4 x D4 26.33 0BE x 0BE 26.33 US4 x D4 27.8 US5 x D4 24.64 US26 x D4 27.8 US26D x D4 24.64 US4 x US4 27.8 US4 x US5 24.64 US5 x US4 24.64 US5 x US5 24.64 US26 x US26D 27.8 US26D x US26 24.64 US26 x US26 27.8 US26D x US26D 24.64 Hinge Hinge Tips Book Hinge Hinge Tips Book 78029 Hinge Type TA274 Hinge 4 2" x 4" 4.30 mm x 0.60 mm D4 x US4 26.33 D4 x US5 26.33 D4 x US26 26.33 D4 x US26D 26.33 D4 x D4 26.33 0BE x 0BE 26.33 US4 x D4 27.8 US5 x D4 24.64 US26 x D4 27.8 US26D x D4 24.64 US4 x US4 27.8 US4 x US5 24.64 US5 x US4 24.64 US5 x US5 24.64 US26 x US26D 27.8 US26D x US26 24.64 US26 x US26 27.8 US26D x US26D 24.64 7803 Hinge Type TA274 Hinge 5" x 5" 27 mm x 27 mm D4 x US4 37.05 D4 x US5 37.05 D4 x US26 37.05 D4 x US26D 37.05 D4 x D4 37.05 0BE x 0BE 37.05 US4 x D4 4.84 US5 x D4 39.00 US26 x D4 4.84 US26D x D4 39.00 US4 x US4 4.84 US4 x US5 39.00 US5 x US4 39.00 US5 x US5 39.00 US26 x US26D 4.84 US26D x US26 39.00 US26 x US26 4.84 US26D x US26D 39.00 s Effective January, 206 DH-4 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Square Barrel Hinges Code 20 Hinges are handed, offered in standard weight only, and cannot be electrified. For options not offered in price book, contact factory. Product LH RH 75840 75842 75844 75742 75846 75744 7584 75843 75845 75743 75847 75745 Hinge Type Hinge SQ333 4 2" x 4 2" 4.30 mm x 4.30 mm Hinge Book 3 58.00 0B 64.00 0BE 58.00 4 58.00 5 56.00 26 58.00 26D 56.00 DESIGNER HARDWARE Olive Knuckle Hinges Code 20 Hinges are handed, offered in standard weight only, and cannot be electrified. For options not offered in price book, contact factory. Product LH RH Hinge Type Hinge Hinge Book 76204 76204NL 76206 76208 76200 7620 76202 76205 76205NL 76207 76209 7620 762 76203 TA3383 6" 52.40 mm x 52.40 mm 3 58.00 3NL 56.00 0B 64.00 0BE 58.00 4 58.00 5 56.00 26 58.00 26D 56.00 s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. DH-5

ALUMINUM CONTINUOUS GEARED HINGES Listing: R2248 C US McKINNEY aluminum continuous hinges have been tested and certified by Underwriters Laboratories, Inc. (U.S.A. and Canada) for up to a 3-hour (A Label) Fire Listing for all 4'0" x 0'0" and 8'0"x 0'0" door LISTED and frame assemblies. Fire listing certification applies to all approved hollow metal and wood door assemblies in dry wall or masonry wall construction. No special preparations are required for up to 90 minutes. Fire Pins, which also increase the security of the door are required for 3-hour applications. Fire Pin applications fall within the UL guidelines for retrofitting assemblies in the field. Cutting the hinge in the field will not void the UL listing. Drilling locations for Fire Pins are found on each template. The most up to date templates are found on our web site at www.mckinneyhinge.com All models are approved for UL retrofit applications per NFPA 80. These hinges conform to ANSI / BHMA Standard A56.26-2000: Grade 2-50 (50 # Door @,500,000 cycles) Grade 2-300 (300 # Door @ 500,000 cycles) Grade -300 (300 # Door @,000,000 cycles ) Grade -600 (600 # Door @ 500,000 cycles) Available Options: (Consult individual pages for availability of option with profile listed) Current Carrying Hinges: QC4 cable will carry 6 amps continuous at 24 volts in-rush for 820 milliseconds. When ordering, please specify where the modification is to be located from the top of the hinge down to the centerline of prep. Handing is required on all hinges provided with electrical modifications. Molex connectors with ElectroLynx are is warranted for 5 years. Molex connectors are included at each leaf for ease of electrical connection. electrical prep is supplied with a 80" cable lead. QC hinges are available with additional options, SER (Serviceable) and ACC (Accessible). MM Magnetic Monitoring Transfer also available with SER and ACC Options. QC ElectroLynx Connectors also available with SER (Serviceable) and ACC (Accessible) Options. EPT Power Transfer Prep (Cut Out Only) for Von Duprin. See page CH-0 for location template. This template must be filled out and included with your order. PT Power Transfer Prep (Cut Out Only) for Securitron, Yale, Centurion, Dorma or Adams Rite. Refer to page CH-0 for location template. This template must be filled out and included with your order. Custom Cut to Length (Hinges may be field cut and not void listing. Field-Cut hinges should be cut from bottom) Fire Pins Kit While hinges are rated without fire pins up to 90 minutes, 3-hour ratings require the use of fire pins. Fire pin kit consists of 4 each for 80-95 inch hinges and 5 each for 96 to 20 inch hinges, as well as the installation instructions on what size holes to drill after the hinges have been installed. Hospital Type Tips are available on full mortise hinges Specify K pre-fix for Kawneer Tuffline Series Aluminum Doors on our MCK-2HD Series, order as K-MCK- 2HD and include size and finish Painted Colors Gear Cap Only - Batch charge and additional charge per hinge Complete Hinge - Batch charge and additional charge per hinge (minimum run 20 hinges) POA Lengths McKINNEY aluminum continuous geared hinges are listed and priced here in 79", 83", 85", 95" and 20" actual lengths for ease of installation on standard nominal door openings. The actual length of the hinge provides for head and threshold clearance. Custom lengths may be ordered as a special run. Consult the factory regarding minimum requirements and noncancellation policy on custom lengths. Hinges may be cut to appropriate length in the field. The hinge should be installed with the cut side on the bottom. Cutting in the field does not void the listing. We recommend that after removing cap, a saw blade be used to score and always begin cut at gear head. Never at leaves. Cut only from bottom of hinge. Do not cut through bearings or screw holes. s Effective January, 206 CG- Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

2HD - 4HD - 25HD Option SN - Satin Nickel 40.00 over CL G - Gold Anodized Same as BZ BL - Black Anodized 20% over BZ QC-4* 75.00 QC-8* 200.00 QC-2* 335.00 ACC-4* 95.00 ACC-8* 225.00 ACC-2* 350.00 SER-4* 95.00 SER-8* 225.00 SER-2* 350.00 MM* 25.00 EPT Prep for Von Duprin 56.00 PT 56.00 HT* 56.00 Custom Cut to Length* 0.25 FIREPIN-C4 (For 80"-95" hinge) 38.75 FIREPIN-C5 (For 96"-20" hinge) 43.80 Dutch Door Prep* 47.00 Painted Colors P.O.A. For QC-2 order one of each of the above Fastener Kits (one kit required up to 95" 2 kits for 20") FMK-CL (7502) 7.00 FMK-BZ (7503) 7.00 Torx Screws 5.80 PBS250SP0R2 wood screw pack (2 ea per bag) $0.00 Replacement SER Sections 2HD Option 9404 SER-4 CL Section 205.00 9405 SER-4 BZ Section 205.00 9406 SER-8 CL Section 235.00 9407 SER-8 BZ Section 235.00 9408 SER-2 CL Section 360.00 9409 SER-2 BZ Section 360.00 22HD - 54HD - 58HD Option SN - Satin Nickel 40.00 over CL G - Gold Anodized Same as BZ BL - Black Anodized 20% over BZ QC-4* 300.00 QC-8* 350.00 QC-2* 465.00 HT* 56.00 Custom Cut to Length* 0.25 FIREPIN-C4 (For 80"-95" hinge) 38.75 FIREPIN-C5 (For 96"-20" hinge) 43.80 Painted Colors P.O.A. For QC-2 order one of each of the above C Repl Cover 22HD CL 28.00 D Repl Cover 22HD BZ 30.00 C Repl Cover 54HD CL 28.00 D Repl Cover 54HD BZ 30.00 C293C Repl Cover 58HD 28.00 D293D Repl Cover 58HD 28.00 Specify length 22HD & 54HD Fastener Kits (one kit required up to 95" 2 kits for 20") Option FSHSK-CL (77350) 7.00 FSHSK-BZ (7735) 7.00 58HD Option 58K-CL (77348) 7.00 58K-BZ (77349) 7.00 ALUMINUM CONTINUOUS GEARED HINGES When ordering advise location for electrical options from top of hinge to center-line of electrical prep location. Handing is required for hinges with electrical prep. * Handing Required Refer to pages CH-0 for the appropriate power transfer locator template. This template must be filled out and included with your order. Gold or other custom finishes may have 6-8 week lead time. s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. CG-2

ALUMINUM CONTINUOUS GEARED HINGES Product FullMortiseEdgeHungFlushDoor MCK-2HD Heavy Duty Code 80 79" 7676 CLEAR 88.46 79" 7674 BRONZE 4.4 83" 7677 CLEAR 88.46 83" 76742 BRONZE 4.4 85" 7678 CLEAR 89.87 85" 76743 BRONZE 5.89 95" 7679 CLEAR 06.42 95" 76744 BRONZE 40.58 20" 76720 CLEAR 7.52 20" 76745 BRONZE 25.20 Crtn Crtn 8 K-MCK-2HD Code 80 For Kawneer Tuffline Series Aluminum Doors, pre-fix the MCK-2HD series with K, example 83" K-MCK-2HD CL Full Mortise Edge Hung Inset Door MCK-22HD Heavy Duty Code 80 Product 79" 7677 CLEAR 48.02 79" 76796 BRONZE 206.24 83" 76772 CLEAR 48.02 83" 76797 BRONZE 206.24 85" 76773 CLEAR 49.49 85" 76798 BRONZE 208.36 95" 76774 CLEAR 85.75 95" 76799 BRONZE 255.35 20" 76775 CLEAR 276.68 20" 76800 BRONZE 380.43 Crtn Crtn 2 4 Complete installation hardware kit which includes 2-24 x 7 6" Phillips, Flat Head Undercut, Zinc screws for frame leaf, and thru bolts and shoulder screws for the door leaf are provided as standard pack unless otherwise specified. Product Product Product 83" 76826 CLEAR 88.46 MCK-WTHD Heavy Duty Code 80 83" 76822 CLEAR 95.73 83" 76823 BRONZE 282.86 95" 76824 CLEAR 282.86 95" 76825 BRONZE 369.93 MCK-4HD Heavy Duty Code 80 79" 7675 CLEAR 89.87 79" 76776 BRONZE 6.94 83" 76752 CLEAR 89.87 83" 76777 BRONZE 6.94 85" 76753 CLEAR 9.33 85" 76778 BRONZE 8.4 95" 76754 CLEAR 09.02 95" 76779 BRONZE 43.52 20" 76755 CLEAR 78.40 20" 76780 BRONZE 232.55 Crtn Crtn Crtn Crtn Crtn 8 Crtn 8 MCK-25HD Heavy Duty Code 80 Product Product MCK-28HD Heavy Duty Code 80 Available Options: To order, specify length and finish. Hinges are supplied with # 2-24 x 7 6" Flat Head Undercut, Type C, thread-forming screws. Crtn Crtn Crtn Crtn Option (Suffix) Net Add Custom Cut to Length* 0.25 Fire Pin Kit: FIREPIN-C4 (For 80"-95" hinge) 38.75 FIREPIN-C5 (For 96"-20" hinge) 43.80 Painted Colors: Gear Cap Only Complete Hinge 79" 76706 CLEAR 92.8 9 79" 7673 BRONZE.47 9 83" 76707 CLEAR 94.22 9 83" 76732 BRONZE 3.02 9 85" 76708 CLEAR 97.30 9 85" 76733 BRONZE 7.72 9 95" 76709 CLEAR 20.84 0 95" 76734 BRONZE 35.39 0 20" 7670 CLEAR 79.87 5 20" 76735 BRONZE 203.37 5 83" 76920 CLEAR 37.98 0 83" 76924 BRONZE 60.20 0 85" 7692 CLEAR 39.45 0 85" 76925 BRONZE 6.62 0 95" 76922 CLEAR 60.79 95" 76926 BRONZE 97.76 20" 76923 CLEAR 247.74 4 20" 76927 BRONZE 254.25 4 * Requires Handing Fire Pins are required on 3 hour rated doors only. Full Mortise Safety Hinges MCK-35HD...Same Pricing as MCK-2HD MCK-38HD...Same Pricing as MCK-2HD P.O.A P.O.A. s Effective January, 206 CG-3 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Continuous Hinges Full Surface MCK-54HD Heavy Duty Code 80 Crtn Crtn 79" 7676 CLEAR 37.99 0 79" 76786 BRONZE 68.5 83" 76762 CLEAR 37.99 83" 76787 BRONZE 68.22 85" 76763 CLEAR 39.46 85" 76788 BRONZE 69.70 95" 76764 CLEAR 68.85 95" 76789 BRONZE 207.64 20" 76765 CLEAR 260.2 4 20" 76790 BRONZE 335.95 MCK-58HD Heavy Duty Code 80 Crtn Crtn 79" 768 CLEAR 30.06 79" 7682 BRONZE 55.38 83" 7683 CLEAR 3.8 83" 7684 BRONZE 56.93 85" 7685 CLEAR 35.8 85" 7686 BRONZE 60.6 95" 7687 CLEAR 4.08 2 95" 7688 BRONZE 85.42 20" 7689 CLEAR 247.5 4 20" 76820 BRONZE 278.50 ALUMINUM CONTINUOUS GEARED HINGES Complete installation hardware kit which includes 2-24 x 7 6" selftapping, Phillips, Flat Head Undercut, Zinc screws for frame leaf, and thru bolts and shoulder screws for the door leaf are provided as standard pack unless otherwise specified. Complete installation hardware kit which includes 2-24 x 7 6" x #0 head, Thread-Forming, Flat Head Undercut screw for the frame leaf. Door leaf fasteners are 4"-20 shoulder bolts and thru bolts for 3 4" door. Available Options: Option (Suffix) Refer to Page CG-3 s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. CG-4

ALUMINUM CONTINUOUS GEARED HINGES McKinney PT Information Form s Effective January, 206 CG-5 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

ing System & Standard Lengths Hinge Prefixes EG Edge Guard FM Edge Mount FS Full Surface HG Hinge/Guard HM Half Mortise HS Half Surface SC Swing Clear Hinge Series This series number indicates the type of hinge and base material used: MCK-3700 Carbon steel barrel hinges with stainless pin MCK-300 Stainless steel barrel hinges with stainless pin MCK-3500 2 Gauge stainless steel pin and barrel security hinges Hinge Models 00 Edge mount (formerly full mortise) 0 Full surface, 8" offset 02 Full surface, flush 03 Half surface, 8" offset 04 Half mortise, 8" offset 05 Edge mount hinge/guard 06 Half mortise hinge/guard 08 Edge guard 09 Full surface, swing clear 0 Swing clear hinge/guard Edge mount, self aligning 5 Edge mount, self aligning flush edge guard 2 Full surface inset, 3 4" offset 22 Edge mount hinge/guard, deep 23 Edge mount hinge/guard, deep, thru bolt 25 Edge mount swing clear 26 Edge mount hinge/guard, swing clear 27 Edge mount, safety hinge 29 Edge mount, self aligning Option Suffixes AS Adjust-A-Screws AMS Adjustable Monitoring Switch CTP Current Transfer Preparation EL ElectroLynx Current Transfer ETAP Electrical Transfer Access Prep *The MP-EMAP was changed to MP-ETAP. There is no prepping necessary for the MP-ETAP, although the frame and door need to be prepped for the EL2. EPT Electrical Power Transfer HT Hospital Tip LL Lead Lined PC Powder Coated RB Raised Barrel WT Wide Throw Standard Hinge Length Conversion Chart A 6'8" door opening = an actual length of 79 3 6" (handed) A 7'0" door opening = an actual length of 83 8" A 7'2" door opening = an actual length of 85 8" (handed) A 8'0" door opening = an actual length of 95" A 0'0" door opening = an actual length of 8 3 4" Custom hinge length will be evaluated at the time of request to ensure proper pin to knuckle alignment. Some custom length requests may be adjusted to ensure a proper hinge assembly. Specify handing on all custom hinge lengths Standard Powder Coat es POA BHMA # Nearest McKINNEY Description Equivalent 690 MP-PC- Dark Bronze 74 MP-PC-2 Eggshell White 693 MP-PC-3 Semi Gloss Black 689 MP-PC-4 Aluminum 706 MP-PC-5 Sun Gold 69 MP-PC-6 Light Bronze For FM300 Series Only POA 605 MP-PC-7 Polished Brass Kynar Paint with Color Approval - POA Adjust-A-Screws for MCK-HG-305; HG-30; HG-322; HG-323; HG326 7' Requires 2 8' Reguires 23 0' Requires 27 STAINLESS AND STEEL CONTINUOUS HINGES s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. CH-

STAINLESS AND STEEL CONTINUOUS HINGES Continuous Hinge Modifications Cut to Charge ADDITIONAL PRICE Please specify handing on all custom hinge lengths. For hinges 40" to 83 8" in length +30.5 to 7'0" price For hinges 83 3 6" to 95" in length +30.5 to 8'0" price For hinges 95 6" to 8 3 4" in length +30.5 to 0'0" price For hinges 8 3 6" to 92" in length POA Handing Required PRODUCT SUFFIX ADDITIONAL PRICE Hospital Tip -HT +4.70/hinge Available on all models except springloaded toilet partition hinges. Helps provide a safe, clean environment. Handing Required PRODUCT SUFFIX ADDITIONAL PRICE Available on all edge mount and half surface models except on Aluminum hinges. PRODUCT SUFFIX ADDITIONAL PRICE Lead Lined Cover -LL +50.27/cover Lead lined astragal for EGT+85.95/astragal Only available on surface mounted Hinges. Used for x-ray room doors and other locations where radiation leakage could be a problem. PRODUCT SUFFIX ADDITIONAL PRICE Wide Throw -WT POA Only available on 300 series hinges. Specify distance from pin centerline to heel edge of hinge when ordering. Reinforcement may be required on extreme wide throw applications. These conditions will be determined through a drawing approval process. Cost will be determined at time of approval. Custom Angle: 97.39 per angle Automatic Door Bottom Cut +34.70 Weld End Pins +45.75 PRODUCT ADDITIONAL PRICE Security Studs + 77.00/hinge up to 85" + 88.00/hinge over 85" Stainless steel security studs mounted to the frame leaf. Door leaf is drilled to accommodate studs Three studs installed on hinges up to 85" Four studs installed on hinges over 85" Door and frame must be specially prepared to accommodate security studs. PRODUCT ADDITIONAL PRICE Raised Barrel (Swaged) +35.00 For cased open or center pivot doors. Available on all edge mount and half surface models. s Effective January, 206 CH-2 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Continuous Hinge & Edge Guard Modifications PRODUCT EL Concealed Circuit ADDITIONAL PRICE For 300, 3500, and 3700 series Edge mount only. Not available on Raised Barrel applications. ElectroLynx EL-4 +226.8 EL-8 +30.58 EL-2 +402.09 PRODUCT PT or EPT Power Transfer Prep ADDITIONAL PRICE Centerline of hinge is standard location by submitting the Power Transfer Template located on page Ch-0. Please provide location and handing forall locations. For swing clear models +60.25/hinge For all other models +48.25/hinge STAINLESS AND STEEL CONTINUOUS HINGES PRODUCT ADDITIONAL PRICE Electrical Modification Access Prep Cutout prep for the AMS & EL. Modifications that allows easy one person access to wiring between the hinge and door/frame. MP-EMAP +88.46/per PRODUCT ADDITIONAL PRICE AMS Adjustable Monitoring Switch Rigid welded assembly gives you the ability to adjust your monitoring switch to work with all applications. Not available on aluminum hinges or powder coat finishes. +240.25 /hinge +88.46 prep charge (see MP-EMAP) PRODUCT Security Fastener ADDITIONAL PRICE +22.45/hinge Torx Head security fasteners are available in lieu of standard fasteners. TKS267SP0SS PRODUCT MTSP00 ADDITIONAL PRICE 75.00 each Right Angle Skew Driver for HG30 and HG3 Standard Screw Pack (see following pages for additional Screw Packs) Standard Screw Pack for FM300; HG305; HG3; HG35 - KMPSS Standard Screw Pack for FM3500; FS350; FS3502; HG3505 - MS244SP0SS24 Standard Screw Pack for FS30; FS302 - M9-0003-630 Standard Screw Pack for HS303; HM304; HG306 - M9-0003-630, TKS267SP05523 s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. CH-3

STAINLESS AND STEEL CONTINUOUS HINGES Fastener / Screw Pack Information Product Description Properties 2-24 x /6 x #0 Head, Flat Head Undercut Self-Drilling Screw TKS267SP0SS24 (24 Pack) Stainless Steel $ 5.25 TKS267SP0BL24 S323-08R2-603 S323-08R2-663 TORX-TKS8075Z Formerly MP-; Replaces MP-0, MP-, MP-2 (24 Pack) #8 x 3/4" Flat Head Self-Drilling Screw Formerly MP-8; For attaching 00, 200, and 300 series covers (Per each) Formerly MP-9; For attaching 00, 200, and 300 series covers (Per each) Formerly MP-6; For attaching 00, 200, and 300 series covers (Per each) Black Zinc $ 6.25 Zinc Phillips $ 0.25 Black $ 0.25 ZincTorx $ 0.70 PBS250SP0SS24 PBS250SP0BL24 TORX-PBS250SP0SS24 2-8 x -/2 x #0 Head, icle Board Screw Formerly MP-28; For edge mounting to wood (24 Pack) Formerly MP-29; For edge mounting to wood (24 Pack) Formerly MP-54; For edge mounting to wood. Security Pin. (24 Pack) Stainless Steel $ 3.75 Black $ 4.75 Stainless Steel Torx $ 0.85 M26-003-0-3/8" Adjust-A-Screw With 0-32 InternalThread and Hex Head Adjustment Formerly MP-25; Right Hand used with MS0075SS screw (Per each) Note: 5/6" pilot hole required for 3/8" - 6 tap 2 ga. reinforcement required $.20 0-32 x 3/4" Flat Head Machine Screw See note on CH for quantities required. MS0075SS Formerly MP-7; Used with M26-003-0 Adjust-A-Screw (Per each) Stainless Steel Phillips $ 0.30 TORX-MS0075SS Formerly MP-55; Used with M26-003-0 Adjust-A-Screw (Per each) Stainless Steel Torx $ 0.75 MS0075BL Used with M26-003-0 Adjust-A-Screw (Per each) Black Stainless Steel $ 0.40 TORX-MS0075BL Used with M26-003-0 Adjust-A-Screw (Per each) Black $ 0.85 Stainless Steel Torx s Effective January, 206 CH-4 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Fastener / Screw Pack Information Product Description Properties 2-24 x 7/6 x #0 Head, Flat Head Undercut Machine Screw, with Security Pin, Tri-RoundThreads TORX-MS244SP0SS24 Formerly MP-52; For edge mounting to metal (24 Pack) Stainless SteelTorx $ 0.85 TORX-MS244SP0BL24 (24 Pack) Black Stainless Steel Torx $ 2.85 3/6 x -/4 Phillips Flat Head Concrete Screw TC3625 Formerly MP-60; (Per each) Zinc $ 0.52 STAINLESS AND STEEL CONTINUOUS HINGES TB420Z4 TB420SS TB420BL4 TB38Z /4-20 x -5/8" Thru-bolt Formerly MP-22; For surface mounting to wood (4 pack) Formerly MP-23, replaces MP-38. For surface mounting to wood (Per each) Formerly MP-56 For surface mounting to wood (4 Pack) /4-20 x -/4"Thru-bolt Formerly MP-24 For surface mounting to wood (Per each) Zinc Steel $ 3.35. Stainless Steel $ 3.35 Black $ 3.35 Zinc $ 0.85 8 SJN /4-20 Molly Jack Nut M26-005-02 Formerly MP-20; 7/6" hole (Per each) Zinc $.75 #4 x 3/4"T-27Torx Button Head Sheet Metal Screw S32C4T2-630 Formerly MP-49. (Per each) Stainless $.60 S308-46-2-603 S222-46R6-603 TORX-MS400Z /4-4 x 3/4" Pan Head Self-Drilling Screw Formerly MP-62; For surface mounting to metal (Per each) /4-20 x " Pan Head Machine Screw Formerly MP-4; For surface mounting to metal (Per each) Formerly MP-65; For surface mounting to metal (Per each) ZincTorx $.60 Zinc Phillips $ 0.75 ZincTorx $.00 Wood Screws PBS250SP0SS24 (24 PK) $ 3.25 Per Pack s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. CH-5

STAINLESS AND STEEL CONTINUOUS HINGES Stainless Steel Edge Mount Hinge MCK-FM300 Code 83 Door Length Hand 6'8" 79 3 6" 76850 32D 224.40 6'8" 79 3 6" 7685 32 25.94 7'0" 83 8" 76852 32D 224.40 7'0" 83 8" 76853 32 25.94 7'2" 85 8" 76854 32D 244.80 7'2" 85 8" 76855 32 292.74 8'0" 95" 76856 32D 270.30 8'0" 95" 76857 32 38.24 0'0" 8 3 4" 76858 32D 364.4 0'0" 8 3 4" 76859 32 42.08 Refer to Pages CH- thru CH-3 For Available Options. Door Length Hand 6'8" 79 3 6" 76860 RH 32D 303.46 6'8" 79 3 6" 7704 LH 32D 303.46 6'8" 79 3 6" 7686 RH 32 350.9 6'8" 79 3 6" 7705 LH 32 350.9 7'0" 83 8" 76862 32D 303.46 7'0" 83 8" 76863 32 350.9 7'2" 85 8" 76864 RH 32D 343.4 7'2" 85 8" 7706 LH 32D 343.4 7'2" 85 8" 76865 RH 32 390.87 7'2" 85 8" 7707 LH 32 390.87 8'0" 95" 76866 32D 348.4 8'0" 95" 76867 32 395.86 0'0" 8 3 4" 76868 32D 47.09 0'0" 8 3 4" 76869 32 464.55 Carton Qty Wgt Stainless Steel Edge Mount Full- Wrap - Edge Guard MCK-HG305 Code 83 Refer to Pages CH- thru CH-3 For Available Options. 6'8" 79 3 6" 76870 RH 32D 282.86 6'8" 79 3 6" 7708 LH 32D 282.86 6'8" 79 3 6" 7687 RH 32 330.3 6'8" 79 3 6" 7709 LH 32 330.3 7'0" 83 8" 76872 32D 282.86 7'0" 83 8" 76873 32 330.3 7'2" 85 8" 76874 RH 32D 320.3 7'2" 85 8" 770 LH 32D 320.3 7'2" 85 8" 76875 RH 32 367.77 7'2" 85 8" 77 LH 32 367.77 8'0" 95" 76876 32D 326.56 8'0" 95" 76877 32 374.0 0'0" 8 3 4" 76878 32D 395.86 0'0" 8 3 4" 76879 32 443.32 0 3 Carton Qty Wgt Stainless Steel Edge Mount Half- Wrap - Edge Guard MCK-HG35 Code 83 Door Length Hand Refer to Pages CH- thru CH-3 For Available Options. Carton Qty Wgt 2 3 5 Stainless Steel Edge Mount Full- Wrap Edge Guard MCK-HG322 Code 83 Door Length Hand 6'8" 79 3 6" 772 RH 32D 372.4 6'8" 79 3 6" 773 LH 32D 372.4 6'8" 79 3 6" 774 RH 32 49.60 6'8" 79 3 6" 775 LH 32 49.60 7'0" 83 8" 776 32D 372.4 7'0" 83 8" 777 32 49.60 7'2" 85 8" 778 RH 32D 429.58 7'2" 85 8" 779 LH 32D 429.58 7'2" 85 8" 7720 RH 32 477.03 7'2" 85 8" 772 LH 32 477.03 8'0" 95" 7722 32D 429.58 8'0" 95" 7723 32 477.03 0'0" 8 3 4" 7724 32D 543.22 0'0" 8 3 4" 7725 32 590.68 Refer to Pages CH- thru CH-3 For Available Options. 6'8" 79 3 6" 7726 RH 32D 372.4 6'8" 79 3 6" 7727 LH 32D 372.4 6'8" 79 3 6" 7728 RH 32 49.60 6'8" 79 3 6" 7729 LH 32 49.60 7'0" 83 8" 7730 32D 372.4 7'0" 83 8" 773 32 49.60 7'2" 85 8" 7732 RH 32D 429.58 7'2" 85 8" 7733 LH 32D 429.58 7'2" 85 8" 7734 RH 32 477.03 7'2" 85 8" 7735 LH 32 477.03 8'0" 95" 7736 32D 429.58 8'0" 95" 7737 32 477.03 0'0" 8 3 4" 7738 32D 543.22 0'0" 8 3 4" 7739 32 590.68 Carton Qty Wgt Stainless Steel Edge Mount Full- Wrap Edge Guard MCK-HG323 Code 83 Door Length Hand 6'8" 79 3 6" 7740 RH 32D 362.5 6'8" 79 3 6" 774 LH 32D 362.5 6'8" 79 3 6" 7742 RH 32 409.60 6'8" 79 3 6" 7743 LH 32 409.60 7'0" 83 8" 7744 32D 362.5 7'0" 83 8" 7745 32 409.60 7'2" 85 8" 7746 RH 32D 47.09 7'2" 85 8" 7747 LH 32D 47.09 7'2" 85 8" 7748 RH 32 464.55 7'2" 85 8" 7749 LH 32 464.55 8'0" 95" 7750 32D 423.33 8'0" 95" 775 32 470.79 0'0" 8 3 4" 7752 32D 530.74 0'0" 8 3 4" 7753 32 578.9 2 3 4 6 Carton Qty Wgt Refer to Pages CH- thru CH-3 For Available Options. Stainless Steel Swing Clear Full- Wrap Edge Guard MCK-HG326 Code 83 Door Length Hand 2 3 4 6 Carton Qty Wgt 2 3 4 6 Refer to Pages CH- thru CH-3 For Available Options. s Effective January, 206 CH-6 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Stainless Steel Edge Mount Safety Hinge MCK-FM327 Code 83 Door Length Hand 6'8" 79 3 6" 7754 RH 32D 32.20 6'8" 79 3 6" 7755 LH 32D 32.20 6'8" 79 3 6" 7756 RH 32 359.65 6'8" 79 3 6" 7757 LH 32 359.65 7'0" 83 8" 7758 32D 32.20 7'0" 83 8" 7759 32 359.65 7'2" 85 8" 7760 RH 32D 353.4 7'2" 85 8" 776 LH 32D 353.4 7'2" 85 8" 7762 RH 32 400.86 7'2" 85 8" 7763 LH 32 400.86 8'0" 95" 7764 32D 359.65 8'0" 95" 7765 32 407. 0'0" 8 3 4" 7766 32D 442.07 0'0" 8 3 4" 7767 32 489.52 Refer to Pages CH- thru CH-3 For Available Options. Stainless Steel Half Mortise Hinge MCK-HM304 Code 83 Door Length Hand 2 3 4 6 7'0" 83 8" 76882 32D 24.02 7'0" 83 8" 76883 32 288.48 7'2" 85 8" 7768 RH 32D 282.86 7'2" 85 8" 7769 LH 32D 282.86 0 7'2" 85 8" 7770 RH 32 330.3 7'2" 85 8" 777 LH 32 330.3 8'0" 95" 76886 32D 288.48 8'0" 95" 76887 32 335.92 0'0" 8 3 4" 7772 32D 353.4 3 Refer to Pages CH- thru CH-3 For Available Options. Door Length Hand 7'0" 83 8" 76892 32D 249.76 7'0" 83 8" 76893 32 297.22 7'2" 85 8" 7774 RH 32D 292.2 7'2" 85 8" 7775 LH 32D 292.2 7'2" 85 8" 7776 RH 32 339.67 7'2" 85 8" 7777 LH 32 339.67 8'0" 95" 76896 32D 298.45 8'0" 95" 76897 32 345.9 0'0" 8 3 4" 7778 32D 362.5 0'0" 8 3 4" 7779 32 409.60 Refer to Pages CH- thru CH-3 For Available Options. Carton Qty Wgt Carton Qty Wgt Stainless Steel Half Mortise, Half- Wrap - Edge Guard MCK-HG306 Code 83 Carton Qty Wgt 2 3 4 Stainless Steel Swing Clear Half- Wrap - Edge Guard MCK-HG3 Code 83 Door Length Hand 7'0" 83 8" 76902 32D 260.99 7'0" 83 8" 76903 32 308.45 7'2" 85 8" 7780 RH 32D 299.7 7'2" 85 8" 778 LH 32D 299.7 7'2" 85 8" 7782 RH 32 347.7 7'2" 85 8" 7783 LH 32 347.7 8'0" 95" 76906 32D 305.95 8'0" 95" 76907 32 353.4 0'0" 8 3 4" 7784 32D 375.26 0'0" 8 3 4" 7785 32 422.7 Refer to Pages CH- thru CH-3 For Available Options. Stainless Steel Full Surface 8" Inset Hinge MCK-FS30 Code 83 Door Length Hand 6'8" 79 3 6" 7786 RH 32D 269.74 6'8" 79 3 6" 7787 LH 32D 269.74 6'8" 79 3 6" 7788 RH 32 37.9 6'8" 79 3 6" 7789 LH 32 37.9 7'0" 83 8" 7790 32D 269.74 7'0" 83 8" 779 32 37.9 7'2" 85 8" 7792 RH 32D 3.58 7'2" 85 8" 7793 LH 32D 3.58 7'2" 85 8" 7794 RH 32 359.03 7'2" 85 8" 7795 LH 32 359.03 8'0" 95" 7796 32D 37.82 8'0" 95" 7797 32 365.27 0'0" 8 3 4" 7798 32D 437.69 0'0" 8 3 4" 7799 32 485.5 Refer to Pages CH- thru CH-3 For Available Options. Stainless Steel Half Surface Hinge MCK-HS303 Code 83 Door Length Hand Carton Qty Wgt 3 4 6 Carton Qty Wgt 2 3 4 6 6'8" 79 3 6" 77358 32D 24.02 7'0" 83 8" 77359 32D 24.02 3 7'2" 85 8" 77360 32D 282.86 8'0" 95" 7736 32D 282.86 4 0'0" 8 3 4" 77362 32D 353.4 6 Refer to Pages CH- thru CH-3 For Available Options. Carton Qty Wgt STAINLESS AND STEEL CONTINUOUS HINGES s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. CH-7

STAINLESS AND STEEL CONTINUOUS HINGES Stainless Steel Full Surface Flush Mount Hinge MCK-FS302 Code 83 Door Length Hand 6'8" 79 3 6" 7690 32D 269.74 6'8" 79 3 6" 769 32 37.9 7'0" 83 8" 7692 32D 269.74 7'0" 83 8" 7693 32 37.9 7'2" 85 8" 7694 32D 3.58 7'2" 85 8" 7695 32 365.27 8'0" 95" 7696 32D 323.43 8'0" 95" 7697 32 365.27 0'0" 8 3 4" 77204 32D 437.69 0'0" 8 3 4" 77205 32 485.5 Refer to Pages CH- thru CH-3 For Available Options. Stainless Steel Full Surface Swing Clear Hinge MCK-FS309 Code 83 Door Length Hand 6'8" 79 3 6" 77206 RH 32D 29.59 6'8" 79 3 6" 77207 LH 32D 29.59 6'8" 79 3 6" 77208 RH 32 339.05 6'8" 79 3 6" 77209 LH 32 339.05 7'0" 83 8" 7720 32D 279.0 7'0" 83 8" 772 32 339.05 7'2" 85 8" 7722 RH 32D 339.67 7'2" 85 8" 7723 LH 32D 339.67 7'2" 85 8" 7724 RH 32 387.2 7'2" 85 8" 7725 LH 32 387.2 8'0" 95" 7726 32D 345.9 8'0" 95" 7727 32 393.36 0'0" 8 3 4" 7728 32D 42.72 0'0" 8 3 4" 7729 32 460.7 Refer to Pages CH- thru CH-3 For Available Options. Stainless Steel Full Surface 3 4" Offset Hinge MCK-FS32 Code 83 Door Length Hand 6'8" 79 3 6" 77220 RH 32D 36.57 6'8" 79 3 6" 7722 LH 32D 36.57 6'8" 79 3 6" 77222 RH 32 364.02 6'8" 79 3 6" 77223 LH 32 364.02 7'0" 83 8" 77224 32D 36.57 7'0" 83 8" 77225 32 364.02 7'2" 85 8" 77226 RH 32D 362.5 7'2" 85 8" 77227 LH 32D 362.5 7'2" 85 8" 77228 RH 32 409.60 7'2" 85 8" 77229 LH 32 409.60 8'0" 95" 77230 32D 368.39 8'0" 95" 7723 32 45.84 0'0" 8 3 4" 77232 32D 480.7 0'0" 8 3 4" 77233 32 527.62 Refer to Pages CH- thru CH-3 For Available Options. Carton Qty Wgt 2 3 4 6 Carton Qty Wgt 2 3 4 6 Carton Qty Wgt 2 3 4 6 Stainless Steel Swing Clear Full- Wrap Edge Guard MCK-HG30 Code 83 Refer to Pages CH- thru CH-3 For Available Options. Door Length Hand 6'8" 79 3 6" 77234 RH 32D 337.7 6'8" 79 3 6" 77235 LH 32D 337.7 6'8" 79 3 6" 77236 RH 32 384.63 6'8" 79 3 6" 77237 LH 32 384.63 7'0" 83 8" 77238 32D 337.7 7'0" 83 8" 77239 32 384.63 7'2" 85 8" 77240 RH 32D 384.0 7'2" 85 8" 7724 LH 32D 384.0 7'2" 85 8" 77242 RH 32 43.45 7'2" 85 8" 77243 LH 32 43.45 8'0" 95" 77244 32D 390.25 8'0" 95" 77245 32 437.69 0'0" 8 3 4" 77246 32D 484.53 0'0" 8 3 4" 77247 32 53.99 Carton Qty Wgt 3500 Series Stainless Security Hinges Stainless Steel Heavy Duty Edge Mount Hinge MCK-FM3500 Code 83 Door Length Hand 6'8" 79 3 6" 77263 RH 32D 32.20 6'8" 79 3 6" 77264 LH 32D 32.20 6'8" 79 3 6" 77265 RH 32 359.65 6'8" 79 3 6" 77266 LH 32 359.65 7'0" 83 8" 77267 32D 32.20 7'0" 83 8" 77268 32 359.65 7'2" 85 8" 77269 RH 32D 366.52 7'2" 85 8" 77270 LH 32D 366.52 7'2" 85 8" 7727 RH 32 43.98 7'2" 85 8" 77272 LH 32 43.98 8'0" 95" 77273 32D 372.76 8'0" 95" 77274 32 420.22 0'0" 8 3 4" 77275 32D 437.69 0'0" 8 3 4" 77276 32 485.5 Refer to Pages CH- thru CH-3 For Available Options. Stainless Steel Heavy Duty Full Surface 8" Inset Hinge MCK-FS350 Code 83 Door Length Hand 6'8" 79 3 6" 77277 RH 32D 342.6 6'8" 79 3 6" 77278 LH 32D 342.6 6'8" 79 3 6" 77279 RH 32 389.62 6'8" 79 3 6" 77280 LH 32 389.62 7'0" 83 8" 7728 32D 342.6 7'0" 83 8" 77282 32 389.62 7'2" 85 8" 77283 RH 32D 39.50 7'2" 85 8" 77284 LH 32D 39.50 7'2" 85 8" 77285 RH 32 438.95 7'2" 85 8" 77286 LH 32 438.95 8'0" 95" 77287 32D 397.74 8'0" 95" 77288 32 397.74 0'0" 8 3 4" 77289 32D 484.53 0'0" 8 3 4" 77290 32 53.99 Refer to Pages CH- thru CH-3 For Available Options. 2 3 4 6 Carton Quantity Carton Quantity s Effective January, 206 CH-8 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Stainless Steel Heavy Duty Full Surface Hinge MCK-FS3502 Code 83 Door Length Hand 6'8" 79 3 6" 7729 RH 32D 342.6 6'8" 79 3 6" 77292 LH 32D 342.6 6'8" 79 3 6" 77293 RH 32 389.62 6'8" 79 3 6" 77294 LH 32 389.62 7'0" 83 8" 77295 32D 342.6 7'0" 83 8" 77296 32 389.62 7'2" 85 8" 77297 RH 32D 39.50 7'2" 85 8" 77298 LH 32D 39.50 7'2" 85 8" 77299 RH 32 438.95 7'2" 85 8" 77300 LH 32 438.95 8'0" 95" 7730 32D 397.74 8'0" 95" 77302 32 445.9 0'0" 8 3 4" 77303 32D 484.53 0'0" 8 3 4" 77304 32 53.99 Refer to Pages CH- thru CH-3 For Available Options. Carton Quantity 3500 Series Stainless Security Hinges (Continued) Stainless Steel Heavy Duty Full Wrap Edge Guard MCK-HG3505 Code 83 Door Length Hand 6'8" 79 3 6" 77305 RH 32D 342.6 6'8" 79 3 6" 77306 LH 32D 342.6 6'8" 79 3 6" 77307 RH 32 389.62 6'8" 79 3 6" 77308 LH 32 389.62 7'0" 83 8" 77309 RH 32D 342.6 7'0" 83 8" 7730 RH 32 389.62 7'2" 85 8" 773 RH 32D 39.50 7'2" 85 8" 7732 LH 32D 39.50 7'2" 85 8" 7733 RH 32 438.95 7'2" 85 8" 7734 LH 32 438.95 8'0" 95" 7735 RH 32D 397.74 8'0" 95" 7736 RH 32 445.9 0'0" 8 3 4" 7737 RH 32D 484.53 0'0" 8 3 4" 7738 RH 32 53.99 Refer to Pages CH- thru CH-3 For Available Options. Carton Quantity STAINLESS AND STEEL CONTINUOUS HINGES Steel Full Mortise Hinge MCK-FM3700 Code 87 Door Length Hand Steel Hinges Carton Qty Wgt SteelFullSurfaceFlushMountHinge MCK-FM3702 Code 87 Door Length Hand Carton Qty Wgt 6'8" 79 3 6" 76950 RH P 3.2 6'8" 79 3 6" 77248 LH P 3.2 7'0" 83 8" 7695 P 3.2 0 7'2" 85 8" 76952 RH P 60.47 7'2" 85 8" 77249 LH P 60.47 8'0" 95" 76953 P 66.7 6'8" 79 3 6" 76980 RH P 68.59 6'8" 79 3 6" 77257 LH P 68.59 7'0" 83 8" 7698 P 68.59 0 7'2" 85 8" 76982 RH P 86.07 7'2" 85 8" 77258 LH P 86.07 8'0" 95" 76983 P 92.3 Refer to Pages CH- thru CH-3 For Available Options. Steel Full Surface 8" Inset Hinge MCK-FS370 Code 87 Door Length Hand Carton Qty Wgt Refer to Pages CH- thru CH-3 For Available Options. Steel Half Surface Hinge MCK-HS3703 Code 87 Door Length Hand Carton Qty Wgt 6'8" 79 3 6" 77250 RH P 68.59 6'8" 79 3 6" 7725 LH P 68.59 7'0" 83 8" 77252 P 68.59 0 7'2" 85 8" 77253 RH P 206.67 7'2" 85 8" 77254 LH P 206.67 8'0" 95" 77255 P 22.9 6'8" 79 3 6" 7739 RH P 5.73 6'8" 79 3 6" 77260 LH P 5.73 7'0" 83 8" 77320 P 5.73 0 7'2" 85 8" 7732 RH P 86.07 7'2" 85 8" 7726 LH P 92.3 8'0" 95" 77322 P 92.3 Refer to Pages CH- thru CH-3 For Available Options. Refer to Pages CH- thru CH-3 For Available Options. s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. CH-9

STAINLESS AND STEEL CONTINUOUS HINGES McKinney Current Transfer Prep (CTP) Information Form s Effective January, 206 CH-0 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

McKinney 3-Day QuickShip Program The McKINNEY 3-Day QuickShip program provides quick access to over 440 of our most popular products to meet the needs of your next job. Orders for items on the program will be shipped within 3 business days. Fax orders to 877-888-2772 or email to orders@assaabloydss-cs.com. Please note that made-to-order hinges ship in 2-3 weeks. Purchase orders that combine made-to-order and QuickShip items will be held and shipped together. Enter QuickShip items on a separate purchase order to ensure the shorter lead time. Standard Weight Spring Hinges SKU Cat. No. es 56007 502 4-/2 x 4 5 56008 502 4-/2 x 4 26D 5605 502 4-/2 x 4-/2 D4 5607 502 4-/2 x 4-/2 P 5609 502 4-/2 x 4-/2 4 56020 502 4-/2 x 4-/2 0 5602 502 4-/2 x 4-/2 0B Standard Weight 2K Hinges SKU Cat. No. Options es 65623 TA273 4-/2 x 4-/2 RH 26D SKU Cat. No. es 5602E 502 4-/2 x 4-/2 0BE 56022 502 4-/2 x 4-/2 5 56024 502 4-/2 x 4-/2 26 56025 502 4-/2 x 4-/2 3 56045 522 4-/2 x 4-/2 0B 56046 522 4-/2 x 4-/2 5 56047 522 4-/2 x 4-/2 26D SKU Cat. No. Options es 65624 TA273 4-/2 x 4-/2 LH 26D MCKINNEY THREE-DAY QUICKSHIP PROGRAM Standard Weight 3K Hinges SKU Cat. No. Options es SKU Cat. No. Options es 56402 TA34 4-/2 x 4 NRP 32D 56403 TA74 4-/2 x 4 5 6976 TA74 4-/2 x 4 0A 6977 TA74 3-/2 x 3-/2 26D 6988 TA74 3-/2 x 3-/2 5 69207 TA74 4-/2 x 4 26D 6920 TA74 4-/2 x 4 4 692 TA74 4-/2 x 4 0 6922 TA74 4-/2 x 4 0B 6925 TA74 4-/2 x 4 26 6927 TA74 4-/2 x 4 3 6922 TA74 4-/2 x 4 D4 69222 TA74 4-/2 x 4-/2 26D 69222FT TA74 4-/2 x 4-/2 FT 26D 69223 TA74 4-/2 x 4-/2 P 69225 TA74 4-/2 x 4-/2 4 69226 TA74 4-/2 x 4-/2 0 69227 TA74 4-/2 x 4-/2 0B 69228 TA74 4-/2 x 4-/2 5 Standard Weight 5K Hinges 69230 TA74 4-/2 x 4-/2 26 69232 TA74 4-/2 x 4-/2 3 69233 HTA74 4-/2 x 4-/2 26D 69236 TA74 4-/2 x 4-/2 0A 69237 TA74 5 x 4-/2 26D 69252 TA74 5 x 5 26D 69353 TA34 4-/2 x 4 32D 69356 TA34 4-/2 x 4-/2 NRP 32D 69362 TA34 4-/2 x 4-/2 0B 69363 HTA34 4-/2 x 4-/2 32D 69368 TA34 4-/2 x 4-/2 32D 69383 TA34 5 x 4-/2 32D 69489 HTA34 4-/2 x 4 32D 69625 TA74 5 x 4 26D 7388 TA34 5 x 4 32D 7420 TA74 4-/2 x 4 NRP 26D 74283 TA74 4-/2 x 4-/2 NRP 26D 74284 TA74 4-/2 x 4-/2 D4 74350 HTA74 4-/2 x 4 26D SKU Cat. No. Options es SKU Cat. No. Options es 5534 T274 3-/2 x 3-/2 5 5535 T274 3-/2 x 3-/2 P 5537 T274 3-/2 x 3-/2 3 5539 T274 3-/2 x 3-/2 26D 5532 T274 3-/2 x 3-/2 0 55327 T274 3-/2 x 3-/2 26 55333 T274 3-/2 x 3-/2 0B 55337 T274 3-/2 x 3-/2 4 55380 T274 3-/2 x 3-/2 D4 55385 TA274 3-/2 x 3-/2 P 55389 TA274 3-/2 x 3-/2 0B 5539 TA274 3-/2 x 3-/2 3 55392 TA274 3 /2 X 3 /2 5 55393 TA274 3-/2 x 3-/2 26D 55395 TA274 3 /2 X 3 /2 0 55430 RCT274 3-/2 x 3-/2 0B 55438 RCT274 3-/2 x 3-/2 26D 55443 RCT274 3 /2 X 3 /2 D4 55485 T274 4 x 4 P 55487 T274 4 x 4 4 5549 T274 4 x 4 3 55496 T274 4 x 4 0B 55497 T274 4 x 4 5 55499 T274 4 x 4 26 5550 T274 4 x 4 26D 55509 T274 4 x 4 D4 5552 RCT274 4 x 4 26D 55555 TA274 4 x 4 P 5556 TA274 4 x 4 3 55563 TA274 4 x 4 0 55569 TA274 4 x 4 26 5557 TA274 4 x 4 26D 55577 TA274 4 x 4 0B 5566 TA274 4-/2 x 4 5 55632 RCTA274 4 x 4 26D 55635 T274 4-/2 x 4 P 55639 T274 4-/2 x 4 26D 55644 T274 4-/2 x 4 0B 55656 T274 4-/2 x 4 5 55673 TA274 4-/2 x 4 0A 55674 TA274 4-/2 x 4 4 55675 TA274 4-/2 x 4 P 55679 TA274 4-/2 x 4 26D 5568 TA274 4-/2 x 4 0 55683 TA274 4-/2 x 4 3 55688 TA274 4-/2 x 4 26 55690 TA274 4-/2 x 4 NRP 26D 5569 TA274 4-/2 x 4 0B 5569E TA274 4-/2 x 4 0BE 55742 T274 4-/2 x 4-/2 0B 55742E T274 4-/2 x 4-/2 0BE 55745 T274 4-/2 x 4-/2 P Continued on next page s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. QS-

MCKINNEY THREE-DAY QUICKSHIP PROGRAM Standard Weight 5K Hinges (Continued) SKU Cat. No. Options es SKU Cat. No. Options es 55747 T274 4-/2 x 4-/2 NRP P 5575 T274 4-/2 x 4-/2 5 55753 T274 4-/2 x 4-/2 26 55755 T274 4-/2 x 4-/2 26D 55763 T274 4-/2 x 4-/2 4 55767 T274 4-/2 x 4-/2 4 5577 T274 4-/2 x 4-/2 3 55774 T274 4-/2 x 4-/2 0 55778 T274 4-/2 x 4-/2 NRP 26D 55783 T274 4-/2 x 4-/2 D4 55797 RCTA274 4-/2 x 4 26D 55802 RCTA274 4-/2 x 4 NRP D4 5580 TA274 4-/2 x 4-/2 D4 5582 TA274 4-/2 x 4-/2 NRP D4 5589 HTA274 4-/2 x 4 26D 55820 TA274 4-/2 x 4-/2 P 55822 TA274 4-/2 x 4-/2 NRP P 5584 TA274 4-/2 x 4-/2 5 55842 TA274 4-/2 x 4-/2 4 55844 TA274 4-/2 x 4-/2 9 55846 TA274 4-/2 x 4-/2 3 55847 TA274 4-/2 x 4-/2 0A 55848 TA274 4-/2 x 4-/2 0 55852 TA274 4-/2 x 4-/2 4 55853 TA274 4-/2 x 4-/2 NRP 3 55854 TA274 4-/2 x 4-/2 5 55856 TA274 4-/2 x 4-/2 26 55858 TA274 4-/2 x 4-/2 26D 55859 HTA274 4 4-/2 x 4-/2 26D 55860 TA274 4-/2 x 4-/2 NRP 26D 55862 TA274 4-/2 x 4-/2 0B 55862E TA274 4-/2 x 4-/2 0BE 55875 TA274 4-/2 x 4-/2 NRP 0B 55940 TB274 4-/2 x 4-/2 26D 55962 TA274 5 x 4 26D 5600 TA274 5 x 4-/2 P 5608 TA274 5 x 4-/2 26 56020 TA274 5 x 4-/2 26D 5602 TA274 5 x 4-/2 5 56026 TA274 5 x 4-/2 0B 56035 HTA274 5 x 4-/2 26D 5606 TA274 4-/2 x 4-/2 BT 0B 5635 TA274 5 x 5 US4 5639 TA274 5 x 5 US3 5645 TA274 5 X 5 5 5647 TA274 5 x 5 US26 5649 TA274 5 x 5 26D 5655 TA274 5 x 5 0B 57533 TA277 4-/2 26D 58845 T234 3-/2 x 3-/2 32D 58964 T234 4-/2 x 4-/2 32D 58972 T234 4-/2 x 4-/2 0B 59646 T234 4 x 4 0B 5966 T234 4 x 4 32D 59678 TA234 4 x 4 32D 59680 TA234 4 x 4 0B 59746 TA234 4-/2 x 4 0B 59752 TA234 4-/2 x 4 32D 59755 TA234 4-/2 x 4 NRP 26D 59756 TA234 4-/2 x 4 NRP 32D 59807 HTA234 4-/2 x 4 32D 59808 HTA234 4-/2 x 4-/2 32D 59822 TA234 4-/2 x 4-/2 4 59823 TA234 4-/2 x 4-/2 32 59826 TA234 4-/2 x 4-/2 3 59828 TA234 4-/2 x 4-/2 0 59832 TA234 4-/2 x 4-/2 26D 59837 TA234 4-/2 x 4-/2 NRP 26D 59838 TA234 4-/2 x 4-/2 32D 59839 TA234 4-/2 x 4-/2 0B 59840 TA234 4-/2 x 4-/2 NRP 32D 59847 TA234 4-/2 x 4-/2 NRP SSF 32D 59904 TA234 5 x 4-/2 32D 59906 TA234 5 x 4-/2 0B 59984 TA234 5 x 5 32D 67206 TCA274 4-/2 x 4 26D 67226 TCA274 4-/2 x 4-/2 26D 67246 TCA274 5 X 4-/2 26D 69829 RCT274 4 X 4 0B Heavy Weight 3K Hinges SKU Cat. No. Options es SKU Cat. No. Options es 56400 TA786 4-/2 x 4 26D 5640 TA786 4-/2 x 4 NRP 26D 56404 TA786 4-/2 x 4 5 69267 TA786 4-/2 x 4-/2 26D 6927 TA786 4-/2 x 4-/2 0 69272 TA786 4-/2 x 4-/2 0B 69275 TA786 4-/2 x 4-/2 26 69276 TA786 4-/2 x 4-/2 5 69278 TA786 5 x 4 5 69279 TA786 5 x 4 26D 69282 TA786 5 x 4-/2 26D 69297 TA786 5 x 5 26D Heavy Weight 5K Hinges 69396 TA386 4-/2 x 4 NRP 32D 6943 TA386 4-/2 x 4-/2 32D 6945 TA386 4-/2 x 4-/2 NRP 32D 69446 HTA386 4-/2 x 4 32D 74942 HTA386 5 x 4 32D 74956 TA386 5 x 4-/2 NRP 32D 75230 HTA786 4-/2 x 4 26D 75232 HTA786 4-/2 x 4-/2 26D 75233 HTA786 5 X 4-/2 26D 75240 TA786 4-/2 x 4-/2 NRP 26D 8306 HTA386 4-/2 x 4-/2 32D 8535 HTB386 4-/2 x 4-/2 PSF 32D SKU Cat. No. Options es SKU Cat. No. Options es 5833 T4A3786 4-/2 x 4 26D 58337 T4A3786 4-/2 x 4 NRP 26D 5834 T4A3786 4-/2 x 4-/2 D4 58343 T4A3786 4-/2 x 4-/2 3 58344 T4A3786 4-/2 x 4-/2 4 58346 T4A3786 4-/2 x 4-/2 0B 58346E T4A3786 4-/2 x 4-/2 0BE 58373 T4A3786 4-/2 x 4-/2 5 58375 T4A3786 4-/2 x 4-/2 P 58377 T4A3786 4-/2 x 4-/2 26 58379 T4A3786 4-/2 x 4-/2 0 58384 T4A3786 4-/2 x 4-/2 26D 58388 T4A3786 4-/2 x 4-/2 NRP 26D 58396 HT4A3786 4-/2 x 4-/2 26D 58435 T4A3786 5 x 4 26D 58437 T4A3386 5 x 4 32D 58440 T4A3786 5 x 4-/2 P 58443 T4A3786 5 x 4-/2 26D 58444 T4A3786 5 x 4-/2 3 58445 T4A3786 5 x 4-/2 0 58446 T4A3786 5 x 4-/2 4 58449 T4A3786 5 x 4-/2 NRP 26D 58453 T4A3786 5 x 4-/2 0A 58462 HT4A3786 5 x 4-/2 26D 58464 T4A3786 5 x 4-/2 0B 58467 T4A3786 5 x 4-/2 26 58522 T4A3786 5 x 5 26D Continued on next page s Effective January, 206 QS-2 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Heavy Weight 5K Hinges (Continued) SKU Cat. No. Options es 58524 T4A3786 5 x 5 0 58532 T4A3786 5 x 5 0B 58533 T4A3786 5 x 5 5 6772 T4A3386 4-/2 x 4 NRP 32D 6773 HT4A3386 4-/2 x 4 32D 6779 T4A3386 4-/2 x 4 32D 6780 T4A3386 4-/2 x 4-/2 NRP SSF 32D 6787 T4A3386 4-/2 x 4-/2 32D 6790 T4A3386 4-/2 x 4-/2 4 679 T4A3386 4-/2 x 4-/2 32 6794 T4A3386 4-/2 x 4-/2 3 6795 T4A3386 4-/2 x 4-/2 0B 6796 T4A3386 4-/2 x 4-/2 0 680 T4A3386 4-/2 x 4-/2 NRP P 682 T4A3386 4-/2 x 4-/2 NRP 26D 683 T4A3386 4-/2 x 4-/2 NRP 0 684 T4A3386 4-/2 x 4-/2 NRP 32D 685 T4A3386 4-/2 x 4-/2 NRP 0B 6820 HT4A3386 4-/2 x 4-/2 32D 6849 T4B3386 4-/2 x 4-/2 NRP 32D 6860H HT4A3386 5 x 4 32D 686 T4A3386 5 x 4-/2 NRP 0B 6862 T4A3386 5 x 4-/2 0 6868 T4A3386 5 x 4-/2 32D 6868H HT4A3386 5 x 4-/2 32D 687 T4A3386 5 x 4-/2 NRP 32D 6873 T4A3386 5 x 4-/2 0B 6928 T4A3386 5 x 5 32D 6946 T4A3386 5 x 5 NRP 32D 6739 TCA3786 4-/2 x 4-/2 NRP 26D 67326 TCA3786 4-/2 x 4-/2 26D 67335 TCA3786 5 x 4 26D 67346 TCA3786 5 x 4-/2 26D 68822 T4A3386 6 x 5 NRP 32D 7285 T4A3786 5 x 4-/2 5 Half Surface Standard Weight 3K Hinges SKU Cat. No. Options es 74466 TA772 4-/2 26D Half Surface & Half Mortise Standard Weight 5K Hinges SKU Cat. No. Options es 5770 TA2772 4-/2 P 5777 TA2772 4-/2 26D 57833 TA2772 5 26D 57880 TA2774 4-/2 P 57884 TA2774 4-/2 26D 63240 BP-0 Hinge Back Plate 4-/2 26D Half Surface Heavy Weight 5K Hinges SKU Cat. No. Options es 5807 T4A3782 4-/2 26D 588 T4A3782 6-3/4 DR 26D 6563 T4A3382 4-/2 32D 72339 T4A3782 6 2-/4 DR 26D 63240 BP-0 Hinge Back Plate 4-/2 26D Swing Clear Heavy Weight 3K Hinges SKU Cat. No. es 7538 TA795 5 26D 75476 TA795 4-/2 26D 73454 HT4A3795 4-/2 26D 7346 T4A3795 4-/2 4 Swing Clear Standard Weight 5K Hinges SKU Cat. No. es 57006 TA2895 4-/2 26D 570 TA2895 4-/2 26 5704 TA4895 4-/2 26D 57045 TA4895 4-/2 26 57030 TA2895 5 26D 57049 TA4895 5 26D 73584 TA4395 5 32D 73585 TA2395 5 32D Swing Clear Heavy Weight 5K Hinges SKU Cat. No. es 5595 T4A3395 4-/2 32D 5596 T4A3395 5 32D 7344 T4A4395 4-/2 32D 73449 T4A4795 4-/2 26 7345 T4A4795 4-/2 26D 73452 HT4A4795 4-/2 26D 73463 T4A3795 4-/2 26D 73482 T4A3795 5 26D 73486 HT4A3795 5 26D 73522 T4A3796 5 26D 73589 HT4A4795 5 26D 73590 T4A4795 5 26D Anchor Hinge Heavy Weight 3K Hinges SKU Cat. No. Options es 75492 TA792 5 x 4-/2 RH 26D 75493 TA792 5 x 4-/2 LH 26D 75500 TA392 5 x 4-/2 RH 32D 7550 TA392 5 x 4-/2 LH 32D 75532 TA5792 5 x 4-/2 RH 26D 75533 TA5792 5 x 4-/2 LH 26D 75544 TA5392 5 x 4-/2 RH 32D 75545 TA5392 5 x 4-/2 LH 32D 7558 TA5393 5 x 4-/2 RH 32D 75582 TA5393 5 x 4-/2 LH 32D MCKINNEY THREE-DAY QUICKSHIP PROGRAM Electric Hinges SKU Cat. No. Options es SKU Cat. No. Options es 55669 TA274 4-/2 x 4 CC4 26D 55885 TA274 4-/2 x 4-/2 CC4 26D 55904 TA274 4-/2 x 4-/2 CC8 26D 55905 TA274 4-/2 x 4-/2 CC8 26 69083 TA74 4-/2 x 4 CC8 26D 69084 TA74 4-/2 x 4-/2 CC8 26D 69203 TA74 4-/2 x 4 CC4 26D 69266 TA74 4-/2 x 4-/2 CC4 26D 78 T4A3786 4-/2 x 4-/2 CC4 26D 736 T4A3786 5 x 4-/2 CC4 26D 766 T4A3786 4-/2 x 4-/2 CC8 26D 7469 TA274 4-/2 x 4-/2 CC8 26D 7475 TA274 4-/2 x 4-/2 CC8 3 7476 TA274 4-/2 x 4-/2 CC8 4 7477 TA274 4-/2 x 4-/2 CC8 0 7479 TA274 4-/2 x 4-/2 CC8 0B 7494 T4A3786 4-/2 x 4-/2 CC8 3 7495 T4A3786 4-/2 x 4-/2 CC8 4 7496 T4A3786 4-/2 x 4-/2 CC8 0 7498 T4A3786 4-/2 x 4-/2 CC8 0B 7499 T4A3786 4-/2 x 4-/2 CC8 26 7508 T4A3786 5 x 4-/2 CC8 26D 7520 TA274 4-/2 x 4-/2 CC8 5 7392 TA274 4-/2 x 4-/2 QC4 26D 7326 T4A3786 4-/2 x 4-/2 QC4 26D 73274 T4A3786 4-/2 x 4-/2 QC6 26D 73279 T4A3786 5 x 4-/2 QC6 26D Continued on next page s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. QS-3

MCKINNEY THREE-DAY QUICKSHIP PROGRAM Electric Hinges (Continued) SKU Cat. No. Options es SKU Cat. No. Options es 73300 TA274 4-/2 x 4 QC8 26D 7332 TA274 4-/2 x 4-/2 QC8 26D 73332 T4A3786 4-/2 x 4-/2 QC8 26D 73336 T4A3786 5 x 4-/2 QC8 26D 73358 TA274 4-/2 x 4 QC2 26D 73364 TA274 4-/2 x 4-/2 QC2 3 73365 TA274 4-/2 x 4-/2 QC2 4 73366 TA274 4-/2 x 4-/2 QC2 0 73368 TA274 4-/2 x 4-/2 QC2 0B 73369 TA274 4-/2 x 4-/2 QC2 26 73370 TA274 4-/2 x 4-/2 QC2 26D 93970 QC-C2500P 2 WIRE 22AWG 25 FT 9397 QC-C3000P 2 WIRE 22AWG 30 FT 93978 QC-RM4 MALE PLUG 4CKT 93979 QC-RM8 MALE PLUG 8CKT 93980 QC-MT2024 MALE TERMINAL AWG 20-24 9398 QC-C003 2 WIRE 22AWG 3 IN 93982 QC-C006 2 WIRE 22AWG 6 IN 93983 QC-C02 2 WIRE 22AWG 2 IN 93984 QC-C200 2 WIRE 22AWG 26 IN 93985 QC-C206 2 WIRE 22AWG 32 IN 93986 QC-C300 2 WIRE 22AWG 38 IN 93987 QC-C306 2 WIRE 22AWG 44 IN 93988 QC-C400 2 WIRE 22AWG 50 IN 93989 QC-C500 2 WIRE 22AWG 5 FT 2 IN 93990 QC-C003P 2 WIRE 22AWG 3 IN 9399 QC-C006P 2 WIRE 22AWG 6 IN 93992 QC-C02P 2 WIRE 22AWG 2 IN 93993 QC-C200P 2 WIRE 22AWG 26 IN 93994 QC-C206P 2 WIRE 22AWG 32 IN 93995 QC-C300P 2 WIRE 22AWG 38 IN 93996 QC-C306P 2 WIRE 22AWG 44 IN 93997 QC-C400P 2 WIRE 22AWG 50 IN 93998 QC-C500P 2 WIRE AWG 5 FT 2 IN 94002 MCK-TSB-C DOOR CORD 8 IN 94003 MCK-TSB-CXL DOOR CORD 36 IN 94004 MCK-EPT ELEC. PWR TRANSFER 94005 MCK-EPTL ELEC. PWR TRNSFR LONG MACPro Hinges 5K Hinges SKU Cat. No. Options es 7632 MPB79 4-/2 x 4-/2 3 7636 MPB79 4-/2 x 4-/2 4 76324 MPB79 4-/2 x 4-/2 0B 76324E MPB79 4-/2 x 4-/2 0BE 76325 MPB79 4-/2 x 4-/2 NRP 0B 76325E MPB79 4-/2 x 4-/2 NRP 0BE 76328 MPB79 4-/2 x 4-/2 26 76332 MPB79 4-/2 x 4-/2 26D 76333 MPB79 4-/2 x 4-/2 NRP 26D 76336 MPB79 4-/2 x 4-/2 P 76337 MPB79 4-/2 x 4-/2 NRP P 76340 MPB9 4-/2 x 4-/2 32D 7634 MPB9 4-/2 x 4-/2 NRP 32D 76344 MP79 4-/2 x 4-/2 3 76360 MP79 4-/2 x 4-/2 26 76362 MPB79 4-/2 x 4 26D 76363 MPB79 4-/2 x 4 NRP 26D 76364 MP79 4-/2 x 4-/2 26D 76364E MP79 4-/2 x 4-/2 0BE 76365 MP79 4-/2 x 4-/2 NRP 26D MACPro Electric Hinges 5K Hinges SKU Cat. No. Options es 76402 MPB79 4-/2 x 4 CC8 26D 76404 MPB79 4-/2 x 4 QC2 26D 76405 MPB79 4-/2 x 4-/2 CC4 26D 76407 MPB79 4-/2 x 4-/2 CC8 26D 73390 T4A3786 4-/2 x 4-/2 QC2 26D 73394 T4A3786 5 x 4-/2 QC2 26D 7340 TA74 4-/2 x 4-/2 QC2 26D 73439 TA786 4-/2 x 4 QC2 26D 73749 TA786 4-/2 x 4-/2 QC8 26D 73994 TA74 4-/2 x 4 QC2 26D 73995 T4A3786 4-/2 x 4 CC8 26D 73996 T4A3786 4-/2 x 4 QC2 26D 73999 TA786 4-/2 x 4 CC8 26D 74000 TA786 4-/2 x 4 QC2 26D ElectroLynx Accessories SKU Cat. No. Description SKU Cat. No. Description 94006 MCK EL-EPT-2 ELEC. PWR TRNSFR 2 WIRE 94007MCK EL-EPTL-2 ELEC. PWR TRNSFR 2 WIRE, LONG 9406 POE-MT2024 MALE TERMINAL AWG 20-24 9407 POE-RM6 MALE PLUG 6 CKT 9408 POE-RF6 FEMALE PLUG 6 CKT 9409 POE-MT2630 MALE TERMINAL AWG 26-30 94020 POE-FT2630 FEMALE TERMINAL AWG 26-30 9402 PoE-C700P DOOR HARNESS ASSY 84 IN 94022 PoE-C206P DOOR HARNESS ASSY 30 IN 94023 PoE-CEPT30 DOOR HARNESS ASSY 30 FT 94026 QC-RF4 FEMALE RECEPTACLE 4 CKT 94027 QC-RF8 FEMALE RECEPTACLE 8 CKT 94028 QC-RM2 MALE PLUG 2 CKT 94029 QC-FT2024 FEMALE TERMINAL AWG 20-24 94030 QC-FT2630 FEMALE TERMINAL AWG 26-30 9403 QC-MT2630 MALE TERMINAL AWG 26-30 94034 QC-R00 MOLEX REPAIR SERVICE KIT 94035 QC-R002 EXTRACTION TOOL 94036 QC-R003 MOLEX HAND CRIMP TOOL 94037 QC-RF2 FEMALE RECEPTACLE 2 CKT 94038 PoE-C300P DOOR HARNESS ASSY 36 IN 94039 PoE-C306P DOOR HARNESS ASSY 42 IN 94040 PoE-C400P DOOR HARNESS ASSY 48 IN 9404 PoE-C406P DOOR HARNESS ASSY 54 IN 94042 PoE-C500P DOOR HARNESS ASSY 60 IN 94043 PoE-C300P DOOR HARNESS ASSY 56 IN 94044 PoE-C500P FRAME HARNESS 80 IN SKU Cat. No. Options es 76368 MP79 4-/2 x 4-/2 P 76369 MP79 4-/2 x 4-/2 NRP P 76374 MPB68 4-/2 x 4-/2 26D 76375 MPB68 4-/2 x 4-/2 NRP 26D 76376 MPB99 4-/2 x 4-/2 32D 76377 MPB99 4-/2 x 4-/2 NRP 32D 76378 MPS60 4-/2 x 4-/2 26D 76379 MPB679 4-/2 x 4-/2 26D 76380 MPS60 4-/2 x 4-/2 P 76383 MPB79 4-/2 x 4-/2 5 76384 MP79 4-/2 x 4-/2 5 76385 MPS 60 4-/2 x 4-/2 5 76386 MPB79 4-/2 x 4 5 76387 MP79 4-/2 x 4 5 76388 MPS60 4-/2 x 4 5 76390 MPB68 5 x 4-/2 26D 76392 MPB99 5 x 4-/2 32D 76393 MPB99 5 x 4-/2 NRP 32D 76395 MPB68 4-/2 x 4-/2 5 76383 MPB79 4-/2 x 4-/2 5 SKU Cat. No. Options es 76409 MPB79 4-/2 x 4-/2 QC2 26D 7642 MPB68 4-/2 x 4-/2 CC8 26D 7644 MPB68 4-/2 x 4-/2 QC2 26D s Effective January, 206 QS-4 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Specialty Hinges SKU Cat. No. Options es 55957 RBTB274 4-/2 x 4-/2 26D 58436 RBT4A3786 4-/2 x 4-/2 26D 57470 TA274 5 x 4-/2 Interim 26D 57475 T4A3386 5 x 4-/2 Interim 32D 57480 T4A3786 5 x 4-/2 Interim 26D 63539 PH-4 26D Rescue Hardware SKU Cat. No. es 63330 CSS-9 Center Hung 5-3/4 26D 63332 CSS-9 Offset Hung 5-3/4 26D 63345 DS-6 26D 63346 EP-5J 26D 63293 CSS-9 Offset Hung 5-7/8 26D 6333 CSS-9 Center Hung 5-7/8 26D 6333 CSS-9 Center Hung 6-3/4 26D Square Barrel Hinges SKU Cat. No. Options es 75844 SQ333 4-/2 x 4-/2 LH 4 75742 SQ333 4-/2 x 4-/2 LH 5 75846 SQ333 4-/2 x 4-/2 LH 26 75744 SQ333 4-/2 x 4-/2 LH 26D 75840 SQ333 4-/2 x 4-/2 LH 3 75843 SQ333 4-/2 x 4-/2 RH 0B 75845 SQ333 4-/2 x 4-/2 RH 4 75743 SQ333 4-/2 x 4-/2 RH 5 75847 SQ333 4-/2 x 4-/2 RH 26 75745 SQ333 4-/2 x 4-/2 RH 26D 7584 SQ333 4-/2 x 4-/2 RH 3 Stocking Programs Pick up orders must be placed by noon. These items are in stock at both: Butt Hinge Sample SKU Cat. No. Description 73002 FS-86 Sample Residential Hinges SKU Cat. No. es 56288 400 3-/2 26D 5682 44 3-/2 26D 56868 458 3-/2 26D Door Springs SKU Cat. No. es 5537 45 9 D4 5538 453 D4 5540 452 3 D4 Olive Knuckle Hinges SKU Cat. No. Options es 76206 TA3383 6 LH 0B 76207 TA3383 6 RH 0B 76208 TA3383 6 LH 4 76209 TA3383 6 RH 4 76200 TA3383 6 LH 5 7620 TA3383 6 RH 5 7620 TA3383 6 LH 26 762 TA3383 6 RH 26 76202 TA3383 6 LH 26D 76203 TA3383 6 RH 26D 76204 TA3383 6 LH 3 76205 TA3383 6 RH 3 SKU Cat. No. Option SKU Cat. No. Option Three Knuckle Steel Standard Weight Hinges 69222 4 /2 x 4 /2 TA74 26D 69227 4 /2 x 4 /2 TA74 0B Five Knuckle Steel Standard Weight Hinges 55742 4 /2 x 4 /2 T274 0B 55755 4 /2 x 4 /2 T274 26D 55820 4 /2 x 4 /2 TA274 P 55846 4 /2 x 4 /2 TA274 3 55848 4 /2 x 4 /2 TA274 0 55854 4 /2 x 4 /2 TA274 5 55856 4 /2 x 4 /2 TA274 26 55858 4 /2 x 4 /2 TA274 26D 55860 4 /2 x 4 /2 TA274 26D NRP 55862 4 /2 x 4 /2 TA274 0B 55875 4 /2 x 4 /2 TA274 0B NRP 55940 4 /2 x 4 /2 TB274 26D 56020 5 x 4 /2 TA274 26D Five Knuckle Non-Ferrous Standard Weight Hinges 59832 4 /2 x 4 /2 TA234 26D 59837 4 /2 x 4 /2 TA234 26D NRP 59838 4 /2 x 4 /2 TA234 32D 59840 4 /2 x 4 /2 TA234 32D NRP Five Knuckle Steel Heavy Weight Hinges 58384 4 /2 x 4 /2 T4A3786 26D 58388 4 /2 x 4 /2 T4A3786 26D NRP 58443 5 x 4 /2 T4A3786 26D Five Knuckle Non-Ferrous Heavy Weight Hinges 6787 4 /2 x 4 /2 T4A3386 32D 684 4 /2 x 4 /2 T4A3386 32D NRP 687 5 x 4 /2 T4A3386 32D NRP Steel Spring Hinges 56023 4 /2 x 4 /2 502 26D Ventura, CA Stocking Program: 4226 Transport Street, Ventura, CA 93003 Phone: 805-535-3262 or 805-535-3246 Mason City, IA Stocking Program: 600 2TH Street, NE, Mason City, IA 5040 Phone: 64-494-683 Fax: 64-422-965 Five Knuckle Steel Standard Weight Electric Hinges 7392 4 /2 x 4 /2 TA274 26D QC4 7332 4 /2 x 4 /2 TA274 26D QC8 73370 4 /2 x 4 /2 TA274 26D QC2 Five Knuckle Steel Heavy Weight Electric Hinges 7326 4 /2 x 4 /2 T4A3786 26D QC4 73332 4 /2 x 4 /2 T4A3786 26D QC8 Mac Pro Standard Weight Steel Hinges 76364 4 /2 x 4 /2 MP79 26D 76332 4 /2 x 4 /2 MPB79 26D 76333 4 /2 x 4 /2 MPB79 26D NRP 76336 4 /2 x 4 /2 MPB79 P Mac Pro Standard Weight Non-Ferrous Hinges 76340 4 /2 x 4 /2 MPB9 32D 7634 4 /2 x 4 /2 MPB9 32D NRP Mac Pro Heavy Weight Steel Hinges 76374 4 /2 x 4 /2 MPB68 26D 76375 4 /2 x 4 /2 MPB68 26D NRP Mac Pro Heavy Weight Non-Ferrous Hinges 76376 4 /2 x 4 /2 MPB99 32D 76377 4 /2 x 4 /2 MPB99 32D NRP Mac Pro Steel Spring Hinges 76378 4 /2 x 4 /2 MPS60 26D Transfer Device Cables 9398 QC-C003 2 WIRE 22AWG 3 INCH 93984 QC-C200 2 WIRE 22AWG 26 INCH 93985 QC-C206 2 WIRE 22AWG 32 INCH 93986 QC-C300 2 WIRE 22AWG 38 INCH 93987 QC-C306 2 WIRE 22AWG 44 INCH 93988 QC-C400 2 WIRE 22AWG 50 INCH 93989 QC-C500 2 WIRE 22AWG 5 FT,2 IN. 93998 QC-C500P 2 WIRE 22AWG 5 FT,2 IN. MCKINNEY THREE-DAY QUICKSHIP PROGRAM MCKINNEY STOCKING PROGRAMS s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. QS-5

MCKINNEY STOCKING PROGRAMS Berlin, CT Stocking Program These items are in stock at 225 Episcopal Road, Berlin CT 06037 Phone 800-346-7707 - Fax 800-54-073. Pick up orders must be placed by noon. Berlin, CT Stocking Program These items are in stock at 225 Episcopal Road, Berlin CT 06037 Phone 800-346-7707 - Fax 800-54-073. Pick up orders must be placed by noon. STEEL HINGES SKU Cat. No. Option SKU Cat. No. Option Residential Hinges 56868 3-/2 x 3-/2 458 26D 5682 3-/2 x 3-/2 44 26D 56288 3-/2 x 3-/2 400 26D Full Mortise Standard Weight Two Knuckle 65623 4-/2 TA273 26D RH 65624 4-/2 TA273 26D LH Full Mortise Standard Weight Three Knuckle 6977 3-/2 x 3-/2 TA74 26D 6988 3-/2 x 3-/2 TA74 5 56403 4-/2 x 4 TA74 5 6976 4-/2 x 4 TA74 0A 69207 4-/2 x 4 TA74 26D 6920 4-/2 x 4 TA74 4 692 4-/2 x 4 TA74 0 6922 4-/2 x 4 TA74 0B 6925 4-/2 x 4 TA74 26 6927 4-/2 x 4 TA74 3 6922 4-/2 x 4 TA74 D4 7420 4-/2 x 4 TA74 26D NRP 69222 4-/2 x 4-/2 TA74 26D 69222FT 4-/2 x 4-/2 TA74 26D FT 69223 4-/2 x 4-/2 TA74 P 69225 4-/2 x 4-/2 TA74 4 69226 4-/2 x 4-/2 TA74 0 69227 4-/2 x 4-/2 TA74 0B 69228 4-/2 x 4-/2 TA74 5 69230 4-/2 x 4-/2 TA74 26 69232 4-/2 x 4-/2 TA74 3 69236 4-/2 x 4-/2 TA74 0A 74283 4-/2 x 4-/2 TA74 26D NRP 74284 4-/2 x 4-/2 TA74 D4 69625 5 x 4 TA74 26D 69237 5 x 4-/2 TA74 26D 69252 5 x 5 TA74 26D Full Mortise Standard Five Knuckle 5534 3-/2 x 3-/2 T274 5 5535 3-/2 x 3-/2 T274 P 5537 3-/2 x 3-/2 T274 3 5539 3-/2 x 3-/2 T274 26D 5532 3-/2 x 3-/2 T274 0 55327 3-/2 x 3-/2 T274 26 55333 3-/2 x 3-/2 T274 0B 55337 3-/2 x 3-/2 T274 4 55380 3-/2 x 3-/2 T274 D4 55430 3-/2 x 3-/2 RCT274 0B 55438 3-/2 x 3-/2 RCT274 26D 55443 3-/2 x 3-/2 RCT274 D4 55385 3-/2 x 3-/2 TA274 P 55389 3-/2 x 3-/2 TA274 0B 5539 3-/2 x 3-/2 TA274 3 55392 3-/2 x 3-/2 TA274 5 55393 3-/2 x 3-/2 TA274 26D 55395 3-/2 x 3-/2 TA274 0 55485 4 x 4 T274 P 55487 4 x 4 T274 4 5549 4 x 4 T274 3 55496 4 x 4 T274 0B 55497 4 x 4 T274 5 55499 4 x 4 T274 26 5550 4 x 4 T274 26D 55509 4 x 4 T274 D4 5552 4 x 4 RCT274 26D 69829 4 x 4 RCT274 0B 55555 4 x 4 TA274 P 5556 4 x 4 TA274 3 55563 4 x 4 TA274 0 55569 4 x 4 TA274 26 5557 4 x 4 TA274 26D 55577 4 x 4 TA274 0B 55632 4 x 4 RCTA274 26D 55635 4-/2 x 4 T274 P 55639 4-/2 x 4 T274 26D 55644 4-/2 x 4 T274 0B 55656 4-/2 x 4 T274 5 5566 4-/2 x 4 TA274 5 55673 4-/2 x 4 TA274 0A 55674 4-/2 x 4 TA274 4 55675 4-/2 x 4 TA274 P 55679 4-/2 x 4 TA274 26D 5568 4-/2 x 4 TA274 0 55683 4-/2 x 4 TA274 3 55688 4-/2 x 4 TA274 26 55690 4-/2 x 4 TA274 26D NRP 5569 4-/2 x 4 TA274 0B 5569E 4-/2 x 4 TA274 0BE 55797 4-/2 x 4 RCTA274 26D 55802 4-/2 x 4 RCTA274 D4 NRP 55742 4-/2 x 4-/2 T274 0B 55742E 4-/2 x 4-/2 T274 0BE 55745 4-/2 x 4-/2 T274 P 55747 4-/2 x 4-/2 T274 P NRP 5575 4-/2 x 4-/2 T274 5 55753 4-/2 x 4-/2 T274 26 55755 4-/2 x 4-/2 T274 26D 55763 4-/2 x 4-/2 T274 4 55767 4-/2 x 4-/2 T274 4 5577 4-/2 x 4-/2 T274 3 55774 4-/2 x 4-/2 T274 0 55778 4-/2 x 4-/2 T274 26D NRP 55783 4-/2 x 4-/2 T274 D4 5580 4-/2 x 4-/2 TA274 D4 5582 4-/2 x 4-/2 TA274 D4 NRP 55820 4-/2 x 4-/2 TA274 P 55822 4-/2 x 4-/2 TA274 P NRP 5584 4-/2 x 4-/2 TA274 5 55842 4-/2 x 4-/2 TA274 4 55844 4-/2 x 4-/2 TA274 9 55846 4-/2 x 4-/2 TA274 3 55847 4-/2 x 4-/2 TA274 0A 55848 4-/2 x 4-/2 TA274 0 55852 4-/2 x 4-/2 TA274 4 55853 4-/2 x 4-/2 TA274 3 NRP 55854 4-/2 x 4-/2 TA274 5 55856 4-/2 x 4-/2 TA274 26 55858 4-/2 x 4-/2 TA274 26D 55860 4-/2 x 4-/2 TA274 26D NRP 55862 4-/2 x 4-/2 TA274 0B 55862E 4-/2 x 4-/2 TA274 0BE 55875 4-/2 x 4-/2 TA274 0B NRP 55940 4-/2 x 4-/2 TB274 26D 5606 4-/2 x 4-/2 TA274 0B BT 55962 5 x 4 TA274 26D 5600 5 x 4-/2 TA274 P 5608 5 x 4-/2 TA274 26 56020 5 x 4-/2 TA274 26D 5602 5 x 4-/2 TA274 5 56026 5 x 4-/2 TA274 0B 5635 5 x 5 TA274 4 5639 5 x 5 TA274 3 5645 5 x 5 TA274 5 5647 5 x 5 TA274 26 5649 5 x 5 TA274 26D 5655 5 x 5 TA274 0B Full Mortise Heavy Weight Three Knuckle 56400 4-/2 x 4 TA786 26D 5640 4-/2 x 4 TA786 26D NRP 56404 4-/2 x 4 TA786 5 69267 4-/2 x 4-/2 TA786 26D 6927 4-/2 x 4-/2 TA786 0 69272 4-/2 x 4-/2 TA786 0B Continued on next page s Effective January, 206 QS-6 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Berlin, CT Stocking Program These items are in stock at 225 Episcopal Road, Berlin CT 06037 Phone 800-346-7707 - Fax 800-54-073. Pick up orders must be placed by noon. SKU Cat. No. Option SKU Cat. No. Option Full Mortise Heavy Weight Three Knuckle (Continued) Five Knuckle Standard Weight Electric Hinges 69275 4-/2 x 4-/2 TA786 26 55669 4-/2 x 4 TA274 26D CC4 69276 4-/2 x 4-/2 TA786 5 7469 4-/2 x 4 TA274 26D CC8 75240 4-/2 x 4-/2 TA786 26D NRP 73300 4-/2 x 4 TA274 26D QC8 69278 5 x 4 TA786 5 73358 4-/2 x 4 TA274 26D QC2 69279 5 x 4 TA786 26D 55885 4-/2 x 4-/2 TA274 26D CC4 69282 5 x 4-/2 TA786 26D 55904 4-/2 x 4-/2 TA274 26D CC8 69297 5 x 5 TA786 26D 55905 4-/2 x 4-/2 TA274 26 CC8 7475 4-/2 x 4-/2 TA274 3 CC8 Full Mortise Heavy Weight Five Knuckle 7476 4-/2 x 4-/2 TA274 4 CC8 5833 4-/2 x 4 T4A3786 26D 7477 4-/2 x 4-/2 TA274 0 CC8 58337 4-/2 x 4 T4A3786 26D NRP 7479 4-/2 x 4-/2 TA274 0B CC8 5834 4-/2 x 4-/2 T4A3786 D4 7520 4-/2 x 4-/2 TA274 5 CC8 58373 4-/2 x 4-/2 T4A3786 5 7392 4-/2 x 4-/2 TA274 26D QC4 58379 4-/2 x 4-/2 T4A3786 0 7332 4-/2 x 4-/2 TA274 26D QC8 58343 4-/2 x 4-/2 T4A3786 3 73364 4-/2 x 4-/2 TA274 3 QC2 58344 4-/2 x 4-/2 T4A3786 4 73365 4-/2 x 4-/2 TA274 4 QC2 58346 4-/2 x 4-/2 T4A3786 0B 73366 4-/2 x 4-/2 TA274 0 QC2 58346E 4-/2 x 4-/2 T4A3786 0BE 73368 4-/2 x 4-/2 TA274 0B QC2 58375 4-/2 x 4-/2 T4A3786 P 73369 4-/2 x 4-/2 TA274 26 QC2 58377 4-/2 x 4-/2 T4A3786 26 73370 4-/2 x 4-/2 TA274 26D QC2 58384 4-/2 x 4-/2 T4A3786 26D 58388 4-/2 x 4-/2 T4A3786 26D NRP Five Knuckle Heavy Weight Electric Hinges 58435 5 x 4 T4A3786 26D 73995 4-/2 x 4 T4A3786 26D CC8 58440 5 x 4-/2 T4A3786 P 73996 4-/2 x 4 T4A3786 26D QC2 58443 5 x 4-/2 T4A3786 26D 78 4-/2 x 4-/2 T4A3786 26D CC4 58444 5 x 4-/2 T4A3786 3 7326 4-/2 x 4-/2 T4A3786 26D QC4 58445 5 x 4-/2 T4A3786 0 73274 4-/2 x 4-/2 T4A3786 26D QC6 58446 5 x 4-/2 T4A3786 4 766 4-/2 x 4-/2 T4A3786 26D CC8 58449 5 x 4-/2 T4A3786 26D NRP 7494 4-/2 x 4-/2 T4A3786 3 CC8 58453 5 x 4-/2 T4A3786 0A 7495 4-/2 x 4-/2 T4A3786 4 CC8 58464 5 x 4-/2 T4A3786 0B 7496 4-/2 x 4-/2 T4A3786 0 CC8 58467 5 x 4-/2 T4A3786 26 7498 4-/2 x 4-/2 T4A3786 0B CC8 7285 5 x 4-/2 T4A3786 5 7499 4-/2 x 4-/2 T4A3786 26 CC8 58522 5 x 5 T4A3786 26D 73332 4-/2 x 4-/2 T4A3786 26D QC8 58524 5 x 5 T4A3786 0 736 5 x 4-/2 T4A3786 26D CC4 58532 5 x 5 T4A3786 0B 73279 5 x 4-/2 T4A3786 26D QC6 58533 5 x 5 T4A3786 5 73336 5 x 4-/2 T4A3786 26D QC8 7508 5 x 4-/2 T4A3786 26D CC8 Three Knuckle Standard Weight Hospital Tip Hinges 73390 4-/2 x 4-/2 T4A3786 26D QC2 74350 4-/2 x 4 HTA74 26D 73394 5 x 4-/2 T4A3786 26D QC2 69233 4-/2 x 4-/2 HTA74 26D Anchor Hinges Five Knuckle Standard Weight Hospital Tip Hinges 75492 5 x 4-/2 TA792 26D RH 5589 4-/2 x 4 HTA274 26D 75493 5 x 4-/2 TA792 26D LH 55859 4-/2 x 4-/2 HTA274 26D 75532 5 x 4-/2 TA5792 26D RH 56035 5 x 4-/2 HTA274 26D 75533 5 x 4-/2 TA5792 26D LH Three Knuckle Heavy Weight Hospital Tip Hinges Steel Door Springs 75230 4-/2 x 4 HTA786 26D 5537 45 D4 75233 5 x 4-/2 HTA786 26D 5540 452 D4 75232 4-/2 x 4-/2 HTA786 26D 5538 453 D4 Five Knuckle Heavy Weight Hospital Tip Hinges Steel Spring Hinges 58396 4-/2 x 4-/2 HT4A3786 26D 56007 502 4-/2 x 4 5 58462 5 x 4-/2 HT4A3786 26D 56008 502 4-/2 x 4 26D Five Knuckle Concealed Bearing Standard Weight Hinges 5605 502 4-/2 x 4-/2 D4 5607 502 4-/2 x 4-/2 P 67206 4-/2 x 4 TCA274 26D 5609 502 4-/2 x 4-/2 4 67226 4-/2 x 4-/2 TCA274 26D 56020 502 4-/2 x 4-/2 0 67246 5 x 4-/2 TCA274 26D 5602 502 4-/2 x 4-/2 0B Five Knuckle Concealed Bearing Heavy Weight Hinges 5602E 502 4-/2 x 4-/2 0BE 6739 4-/2 x 4-/2 TCA3786 26D NRP 56022 502 4-/2 x 4-/2 5 67326 4-/2 x 4-/2 TCA3786 26D 56024 502 4-/2 x 4-/2 26 67335 5 x 4 TCA3786 26D 56025 502 4-/2 x 4-/2 3 67346 5 x 4-/2 TCA3786 26D 56045 522 4-/2 x 4-/2 0B 56046 522 4-/2 x 4-/2 5 Three Knuckle Standard Weight Electric Hinges 56047 522 4-/2 x 4-/2 26D 69203 4-/2 x 4 TA74 26D CC4 Mac Pro Standard Weight Steel Hinges 69083 4-/2 x 4 TA74 26D CC8 73994 4-/2 x 4 TA74 26D QC2 76387 4-/2 x 4 MP79 5 69084 4-/2 x 4-/2 TA74 26D CC8 76386 4-/2 x 4 MPB79 5 69266 4-/2 x 4-/2 TA74 26D CC4 76362 4-/2 x 4 MPB79 26D 7340 4-/2 x 4-/2 TA74 26D QC2 76363 4-/2 x 4 MPB79 26D NRP 76344 4-/2 x 4-/2 MP79 3 Three Knuckle Heavy Weight Electric Hinges 76360 4-/2 x 4-/2 MP79 26 73999 4-/2 x 4 TA786 26D CC8 76364 4-/2 x 4-/2 MP79 26D 74000 4-/2 x 4 TA786 26D QC2 76364E 4-/2 x 4-/2 MP79 0BE 73749 4-/2 x 4-/2 TA786 26D QC8 76365 4-/2 x 4-/2 MP79 26D NRP 73439 4-/2 x 4-/2 TA786 26D QC2 Continued on next page MCKINNEY STOCKING PROGRAMS s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. QS-7

MCKINNEY STOCKING PROGRAMS Berlin, CT Stocking Program These items are in stock at 225 Episcopal Road, Berlin CT 06037 Phone 800-346-7707 - Fax 800-54-073. Pick up orders must be placed by noon. SKU Cat. No. Option SKU Cat. No. Option Mac Pro Standard Weight Steel Hinges (Continued) 9399 QC-C006p 2 Wire AWG 6 Inch 76368 4-/2 x 4-/2 MP79 P 93992 QC-C02p 2 Wire 22AWG 2 Inch 76369 4-/2 x 4-/2 MP79 P NRP 93993 QC-C200p 2 Wire 22AWG 26 Inch 76384 4-/2 x 4-/2 MP79 5 93994 QC-C206p 2 Wire 22AWG 32 Inch 7632 4-/2 x 4-/2 MPB79 3 93995 QC-C300p 2 Wire 22AWG 38 Inch 7636 4-/2 x 4-/2 MPB79 4 93996 QC-C306p 2 Wire 22AWG 44 Inch 76324 4-/2 x 4-/2 MPB79 0B 93997 QC-C400p 2 Wire 22AWG 50 Inch 76324E 4-/2 x 4-/2 MPB79 0BE 93998 QC-C500p 2 Wire 22AWG 5 Ft,2 In. 76325 4-/2 x 4-/2 MPB79 0B NRP 94002 MCK-TSB-C Door Cord 8 Inch 76325E 4-/2 x 4-/2 MPB79 0BE NRP 94003 MCK-TSB-C X L Door Cord 36 Inch 76328 4-/2 x 4-/2 MPB79 26 94004 MCK-EPT 76332 4-/2 x 4-/2 MPB79 26D 94005 MCK-EPTL 76333 4-/2 x 4-/2 MPB79 26D NRP 94006 MCK EL-EPT-2 76336 4-/2 x 4-/2 MPB79 P 94007 MCK EL-EPTL-2 76337 4-/2 x 4-/2 MPB79 P NRP 9406 PoE-Mt2024 Male Terminal(AWG 20-24) 76383 4-/2 x 4-/2 MPB79 5 9407 PoE-RM6 Male Plug (6 CKT) 9408 PoE-RF6 Female Plug (6 CKT) Mac Pro Heavy Weight Steel Hinges 9409 PoE-MT2630 Male Terminal(AWG 26-30) 76395 4-/2 x 4-/2 MPB68 5 94020 PoE-FT2630 Female Termin (AWG 26-30 76374 4-/2 x 4-/2 MPB68 26D 9402 PoE-C700p 84 Inch Door Harness Assy 76375 4-/2 x 4-/2 MPB68 26D NRP 94022 PoE-C206p 30 Inch Door Harness Assy 76390 5 x 4-/2 MPB68 26D 94023 PoE-Cept30 30 Ft Door Harness Assy. Mac Pro Standard Weight Electric Hinges 94026 QC-Rf4 Female Recep. (4ckt) Per C 76402 4-/2 x 4 MPB79 26D CC8 94027 QC-Rf8 Female Recep (8ckt) Per C 76404 4-/2 x 4 MPB79 26D QC2 94028 QC-RM2 Male Plug (2CKT) Per C 76405 4-/2 x 4-/2 MPB79 26D CC4 94029 QC-FT2024 Female Term (AWG 20-24) 76407 4-/2 x 4-/2 MPB79 26D CC8 94030 QC-FT2630 Female Term (AWG 26-30) 76409 4-/2 x 4-/2 MPB79 26D QC2 9403 QC-MT2630 Male Terminal (AWG 26-30) 94034 QC-R00 Mole X Repair Service Kit Mac Pro Heavy Weight Electric Hinges 94035 QC-R002 E X Traction Tool 7642 4-/2 x 4-/2 MPB68 26D CC8 94036 QC-R003 Mole X Hand Crimp Tool 7644 4-/2 x 4-/2 MPB68 26D QC2 94037 QC-RF2 Female Recep. (2ckt) Per C 94038 PoE-C300p 36 Inch Door Harness Assy Mac Pro Spring Hinges 94039 PoE-C306p 42 Inch Door Harness Assy 76388 4-/2 x 4 MPS60 5 94040 PoE-C400p 48 Inch Door Harness Assy 76378 4-/2 x 4-/2 MPS60 26D 9404 PoE-C406p 54 Inch Door Harness Assy 76379 4-/2 x 4-/2 MPS679 26D 94042 PoE-C500p 60 Inch Door Harness Assy 76380 4-/2 x 4-/2 MPS60 P 94043 PoE-C300p 56 In Door Harness Assy 76385 4-/2 x 4-/2 MPS60 5 94044 PoE-C500p 80 Inch Frame Harness Miscellaneous Non-Ferrous Standard Weight Swing Clear Hinges 63293 CSS-9 5 7/8 Offset 26D 73585 5 TA2395 32D 6333 CSS-9 5-7/8 Center Hung 26D 73584 5 TA4395 32D 63330 CSS-9 5 3/4 Center Hung 26D 6333 CSS-9 6 3/4 Center Hung 26D Steel Standard Weight Swing Clear Hinges 63332 CSS-9 5 3/4 Offset Hung 26D 57006 4-/2 TA2895 26D 63345 DS-6 26D 570 4-/2 TA2895 26 63346 EP-5J 26D 5704 4-/2 TA4895 26D 63539 PH-4 26D 57045 4-/2 TA4895 26 73002 FS-86 Sample 57030 5 TA2895 26D 57049 5 TA4895 26D Steel Raised Barrel Standard Weight Hinges 55957 4-/2 x 4-/2 RBTB274 26D Steel Heavy Weight Swing Clear Hinges 75476 4-/2 TA795 26D Steel Raised Barrel Heavy Weight Hinges 7538 5 TA795 26D 58436 4-/2 x 4-/2 RBT4B3786 26D 73454 4-/2 HT4A3795 26D Specialty Hinges (Interim Hinges) 7346 4-/2 T4A3795 4 73463 4-/2 T4A3795 26D 57470 Interim 5 x 4-/2 TA274 26D 73449 4-/2 T4A4795 26 57475 Interim 5 x 4-/2 T4A3386 32D 7345 4-/2 T4A4795 26D 57480 Interim 5 x 4-/2 T4A3786 26D 73452 4-/2 HT4A4795 26D Wire Harness Transfer Devices 73589 5 HT4A4795 26D 93970 QC-C2500p 25 Ft. 2 Wire 22AWG 73590 5 T4A4795 26D 9397 QC-C3000p 30 Ft. 2 Wire 22AWG 73482 5 T4A3795 26D 93978 QC-RM4 Male Plug (4CKT) 73486 5 HT4A3795 26D 93979 QC-RM8 Male Plug (8CKT) 73522 5 T4A3796 26D 93980 QC-MT2024 Male Terminal (AWG 20-24) Non-Ferrous Heavy Weight Swing Clear Hinges 9398 QC-C003-2 Wire 22AWG 3 In. 5595 4-/2 T4A3395 32D 93982 QC-C006 2 Wire 22AWG 6 Inch 5596 5 T4A3395 32D 93983 QC-C02 2 Wire 22AWG 2 Inch 7344 4-/2 T4A4395 32D 93984 QC-C200 2 Wire 22AWG 26 Inch 93985 QC-C206 2 Wire 22AWG 32 Inch Back Plates For Half Surface Hinges 93986 QC-C300 2 Wire 22AWG 38 Inch 63240 4-/2 BP-0 26D 93987 QC-C306 2 Wire 22AWG 44 Inch Steel Half Surface Standard Weight Hinges Wire Harness Transfer Devices 74466 4-/2 TA772 26D 93988 QC-C400 2 Wire 22AWG 50 Inch 5777 4-/2 TA2772 26D 93989 QC-C500 2 Wire 22AWG 5 Ft,2 In. 5770 4-/2 TA2772 P 93990 QC-C003p 2 Wire AWG 3 Inch 57833 5 TA2772 26D s Effective January, 206 QS-8 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved.

Berlin, CT Stocking Program These items are in stock at 225 Episcopal Road, Berlin CT 06037 Phone 800-346-7707 - Fax 800-54-073. Pick up orders must be placed by noon. SKU Cat. No. Option SKU Cat. No. Option Steel Half Surface Heavy Weight Hinges 588 6 T4A3782 26D -3/4 DR 72339 6 T4A3782 26D 2-/4 DR Non-Ferrous Half Surface Heavy Weight Hinges 6563 4-/2 T4A3382 32D 5807 4-/2 T4A3782 26D Steel Full Surface Standard Weight Hinges 57533 4-/2 TA277 26D Steel Half Mortise Standard Weight Hinges 57880 4-/2 TA2774 P 57884 4-/2 TA2774 26D NON-FERROUS Full Mortise Standard Weight Three Knuckle 56402 69353 4-/2 x 4 4-/2 x 4 TA34 TA34 32D 32D NRP 69356 4-/2 x 4-/2 TA34 32D NRP 69362 4-/2 x 4-/2 TA34 0B 69368 4-/2 x 4-/2 TA34 32D 69383 5 x 4-/2 TA34 32D 7388 5 x 4 TA34 32D Full Mortise Standard Five Knuckle 58845 3-/2 x 3-/2 T234 32D 58964 4-/2 x 4-/2 T234 32D 58972 4-/2 x 4-/2 T234 0B 59646 4 x 4 T234 0B 5966 4 x 4 T234 32D 59678 4 x 4 TA234 32D 59680 4 x 4 TA234 0B 59746 4-/2 x 4 TA234 0B 59752 4-/2 x 4 TA234 32D 59755 4-/2 x 4 TA234 26D NRP 59756 4-/2 x 4 TA234 32D NRP 59822 4-/2 x 4-/2 TA234 4 59823 59826 4-/2 x 4-/2 4-/2 x 4-/2 TA234 TA234 32 3 59828 59832 4-/2 x 4-/2 4-/2 x 4-/2 TA234 TA234 0 26D 59837 4-/2 x 4-/2 TA234 26D NRP 59838 4-/2 x 4-/2 TA234 32D 59839 4-/2 x 4-/2 TA234 0B 59840 4-/2 x 4-/2 TA234 32D NRP 59847 4-/2 x 4-/2 TA234 32D NRP SSF 59904 5 x 4-/2 TA234 32D 59906 5 x 4-/2 TA234-0B 5990 5 x 4-/2 TA234 32D NRP 59984 5 x 5 TA234 32D 7600 4-/2 x 4-/2 TA234 0B NRP Mac Pro Standard Weight Non-Ferrous Hinges 76340 4-/2 x 4-/2 MPB9 32D 7634 4-/2 x 4-/2 MPB9 32D NRP Full Mortise Heavy Weight Three Knuckle 69396 4-/2 x 4 TA386 32D NRP 69407 4-/2 x 4-/2 TA386 0B 6943 4-/2 x 4-/2 TA386 32D 6945 4-/2 x 4-/2 TA386 32D NRP 7494 5 x 4 TA386 32D 74956 5 x 4-/2 TA386 32D NRP Full Mortise Heavy Weight Five Knuckle 58437 5 x 4 T4A3386 32D 6772 4-/2 x 4 T4A3386 32D NRP 6779 4-/2 x 4 T4A3386 32D 6780 4-/2 x 4-/2 T4A3386 32D NRP SSF 6787 4-/2 x 4-/2 T4A3386 32D 6790 4-/2 x 4-/2 T4A3386 4 679 4-/2 x 4-/2 T4A3386 32 6794 4-/2 x 4-/2 T4A3386 3 6795 4-/2 x 4-/2 T4A3386 0B 6796 4-/2 x 4-/2 T4A3386 0 680 4-/2 x 4-/2 T4A3386 P NRP 682 4-/2 x 4-/2 T4A3386 26D NRP 683 4-/2 x 4-/2 T4A3386 0 NRP 684 4-/2 x 4-/2 T4A3386 32D NRP 685 4-/2 x 4-/2 T4A3386 0B NRP 6849 4-/2 x 4-/2 T4B3386 32D NRP 686 5 x 4-/2 T4A3386 0B NRP 6862 5 x 4-/2 T4A3386 0 6868 5 x 4-/2 T4A3386 32D 687 5 x 4-/2 T4A3386 32D NRP 6873 5 x 4-/2 T4A3386 0B 6928 5 x 5 T4A3386 32D 6946 5 x 5 T4A3386 32D NRP 68822 6 x 5 T4A3386 32D NRP Mac Pro Heavy Weight Non-Ferrous Hinges 76376 4-/2 x 4-/2 MPB99 32D 76377 4-/2 x 4-/2 MPB99 32D NRP 76392 5 x 4-/2 MPB99 32D 76393 5 x 4-/2 MPB99 32D NRP Three Knuckle Standard Weight Hospital Tip Hinges 69489 4-/2 x 4 HTA34 32D 69363 4-/2 x 4-/2 HTA34 32D Five Knuckle Standard Weight Hospital Tip Hinges 59807 4-/2 x 4 HTA234 32D 59808 4-/2 x 4-/2 HTA234 32D Three Knuckle Heavy Weight Hospital Tip Hinges 69446 4-/2 x 4 HTA386 32D 8306 4-/2 x 4-/2 HTA386 32D 8535 4-/2 x 4-/2 HTB386 32D W/PSF 74942 5 x 4 HTA386 32D Five Knuckle Heavy Weight Hospital Tip Hinges 6773 4-/2 x 4 HT4A3386 32D 6820 4-/2 x 4-/2 HT4A3386 32D 6860H 5 x 4 HT4A3386 32D 6868H 5 x 4-/2 HT4A3386 32D Stainless Steel Spring Hinges 56056 4-/2 x 4 552 32D 56080 4-/2 x 4-/2 552 32D Anchor Sets 75500 5 x 4-/2 TA392 32D RH 7550 5 x 4-/2 TA392 32D LH 75544 5 x 4-/2 TA5392 32D RH 75545 5 x 4-/2 TA5392 32D LH 7558 5 x 4-/2 TA393 32D RH 75582 5 x 4-/2 TA393 32D LH Specialty Hinges (Square Barrel Hinges) 75742 4-/2 x 4-/2 SQ333 LH 5 75743 4-/2 x 4-/2 SQ333 RH 5 75744 4-/2 x 4-/2 SQ333 LH 26D 75745 4-/2 x 4-/2 SQ333 RH 26D 75840 4-/2 x 4-/2 SQ333 LH 3 7584 4-/2 x 4-/2 SQ333 RH 3 75843 4-/2 x 4-/2 SQ333 RH 0B 75844 4-/2 x 4-/2 SQ333 LH 4 75845 4-/2 x 4-/2 SQ333 RH 4 75846 4-/2 x 4-/2 SQ333 LH 26 75847 4-/2 x 4-/2 SQ333 RH 26 Specialty Hinges (Olive Knuckle Hinges) 76200 6 TA3383 5 LH 7620 6 TA3383 5 RH 76202 6 TA3383 26D LH 76203 6 TA3383 26D RH 76204 6 TA3383 3 LH 76205 6 TA3383 3 RH 76206 6 TA3383 0B LH 76207 6 TA3383 0B RH 76208 6 TA3383 4 LH 76209 6 TA3383 4 RH 7620 6 TA3383 26 LH 762 6 TA3383 26 RH MCKINNEY STOCKING PROGRAMS s Effective January, 206 Copyright 202, 206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. QS-9

McKinney Products Company 225 Episcopal Road Berlin, CT 06037 Phone: (800) 346-7707 Fax: (800) 54-073 www.mckinneyhinge.com Copyright 988-206, McKinney Products Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of McKinney Products Company is prohibited. (In Canada) Door Security Solutions Canada 60 Four Valley Drive Vaughan, ON L4K 4T9 800-46-3007 www.assaabloy.ca 5300 /206