ULTRASONIC LEVEL INDICATOR REFLEX/SCANFLEX MULTIFLEX MINIFLEX LR MICROFLEX-C TYPICAL NON-CONTACT LEVEL METER! OUTSTANDING SOFWARE MAKES HIGHLY STABLE AND RELIABLE. A WIDE RANGE OF S FROM SOLIDS TOLIQUIDS, MEASUREMENT IN LONGER RANGE WITH MULTI-POINT SCANNING SYSTEM CAT.No.UMH-04-080E
HI.TO LO.TO HEAD FLOW R.HR R.HR R.HR R4.HR R.ST R.ST R.ST R4.ST R.HR GAIN R.ST TEMP DISP ma HI.TO LO.TO HEAD FLOW R.HR R.HR R.HR R4.HR R.ST R.ST R.ST R4.ST R.HR GAIN R.ST TEMP DISP ma ULTRASONIC LEVEL INDICATOR From Long-range Measurement to Multipoint Scanning, Excellent Ultrasonic Level 0 REFLEX CONTROLLER 60 0 Wall mount 90 8 Mounting slot 4-4. Cable gland - Mounting slot 4-4. % 00 80 60 Measure Level Measure Empty distance Measure Volume Expiosion EExm T6 Accuracy : ±0.% (ambient temp. ) Resolution : mm or 0.%FS whichever greater Blanking : Programmable (min 0.m dependent on transducer) Transducers : RVY / RYT / RWV / RWT / RXM9 series Power Supply : 0/0VAC ±0% 0/60Hz VA selectable or 4VDC % 0% 9W Relay output : SPDT 0VAC 8A 0VDC 8A (Resistance load) Analogue output : 4-/ 4mA 70 Serial output : RS/ RS48 Display : Graphics LCD module ( x dot) red LED s for relay status Ambient Temp : 70 Enclosure : IP6 Polycarbonate Dimensions : x 60 x 90mm Weight :.7kg 0 0.00.0.0 4. 6.0 7. 9.0 0..0.4.04 VERSATILE Multi-channel non-contact ultrasonic level controller for liquids, slurries & solids from up to 0 points of level measurement. It can store data and output orderly or arbitrarily. Its measuring range up to 0 meters. MEASUREMENT & CONTROL An analogue output and up to two relays per point can be achieved by the addition of SA-0 analogue and SR-0 relay cards to the system. FAST Scanning of ten points can be achieved in under 0 seconds on liquid applications. Scan times are programmable but dependent on the application. HYCONTROL Multi-control System REFLEX Controller Multiplexor SM0 REDUCING COST PER POINT The Multiplexor SM-0, added to the Reflex, enables to scan up to 0 separate points of level, thus reducing the cost per point for each additional tank or silo monitored. SM-0 can remotely be added. SERIAL COMMUNICATION RS port allows transfer of level data for all 0 points, and provides the means for fast commissioning when using Vision System software. Analogue module SA 0 Relay module SR0 0 4-mA Relay0 4 6 7 8 9 0
RYV RYT (Inbuilt Temp Sensor) REFLEX TRANSDUCER Face material : Epoxy Max range liquids : m Ambient temp : 90 Haz. area : EExm IIT6 Mounting : M x P. OPTION 0m RWV RWT (Inbuilt Temp Sensor) RYVF /RWVF RVTF /RWTF (Inbuilt Temp Sensor) RXM9 8 70 0 Face material : PVDF Max range liquids : m Ambient temp : 90 Haz. area : EExm T6 Face material : Epoxy / PVDF Max range liquids : m Ambient temp : 90 Haz. area : EExm T6 Weight : Flange size Flange(plastic) 4"/" ASME, DN80/00 Body material : Polypropylene Face material : Polyethylene Frequency : 9KHz Beam angle : 8 Min dead band : 0.7m Max range liquids : 0m Max range solids : m Ambient temp : 60 Haz. area : No Protection : IP6 Mounting : M x P. Weight :.8kg 7 G /4 Aiming kit 0 9 6 0 Terminal Box Terminal Box 70 4 T L about 0 Adjustable angle T RXM9E 8 70 Body material : Polypropylene Face material : Polyethylene Frequency : 7KHz Beam angle : Min dead band :.0m Max range liquids : 0m Max range solids : m Ambient temp : 60 Haz. area : No Protection : IP6 Mounting : M x P. Weight : 4.8kg 0 The min. dead band and the max.range are varied by the operating temperature and environments. ISOLATION KIT Kit to prevent oscillation loss of ultrasonic wave (standard) M P. 48 Isolation Kit Attached Unused
HI.TO LO.TO HEAD FLOW R.HR R.HR R.HR R4.HR R.ST R.ST R.ST R4.ST R.HR HI.TO LO.TO HEAD FLOW R.HR R.HR R.HR R4.HR R.ST R.ST R.ST R4.ST R.HR R.ST TEMP DISP ma GAIN R.ST TEMP DISP ma GAIN ULTRASONIC LEVEL INDICATOR 4 6 Measure Level Measure Empty distance Measure Volume Measure Differential level Measure Open channel flow Pump control MULTIFLEX CONTROLLER 0 60 0 Wall mount MULTIFLEX Expiosion EExm T6 90 8 Mounting slot 4-4. Cable gland - Mounting slot 4-4. Providing all the functionality of level control ranging from solids to liquids whatever the conditions may be. FEATURES It can operate in dirty, dusty environments, and a high degree of resolution and functionality enables it to apply to diversified applications. It can be protected from any unauthorized access if a password is used. It maintains the high level of security. Linearisation for 7 different vessel shapes held in memory, its volume conversion is easier. It can accept power supplies of either DC or AC volt. There is no need for separate programmers or computers to set up but all you need is to set up necessary parameters using the keypad. % 00 80 60 0 0.00.00.0.0 4.0.0 6.0 7.0 8.0 9.0 0.0 Accuracy : ±0.% (ambient temp. ) Resolution : mm or 0.%FS whichever greater Blanking : Programmable (min 0.m dependent on transducer) Transducers : RVY / RYT / RWV / RWT Power Supply : 0/0VAC ±0% 0/60Hz VA selectable or 4VDC % 0% 9W Relay output : SPDT 0VAC 8A 0VDC 8A (Resistance load) Analogue output : 4-/ 4mA 70 Serial output : RS/ RS48 Display : 4 digit mm LCD red LED s for relay status Ambient Temp : 70 Enclosure : IP6 Polycarbonate Dimensions : x 60 x 90mm Weight :.7kg 44 MULTIFLEX 96 Panel mount 8 7 DIVERSITY In applications on solids, it can operate in adverse environments such as dirt and dust. For liquids, it can achieve a high-degree of resolution and functionality. It can satisfy the requirements necessary for liquid and solid applications in one instrument, in either a panel or wall mount enclosure. SECURITY It can be protected from any unauthorized access if a password is used. MULTIPLE POWER SUPPLIES It can accept power supplies of either 0 or 0 volt AC. A separate 4 volt DC input is provided on every unit for those who want to operate on a safe DC voltage or provide back-up in case of power failure. INTEGRAL CONSOLE Neither complex codes or programming nor separate programmers or computers to set up are required. All you need is to set up necessary parameters using the keypad. VOLUME CONVERSION Linearisation for 7 different vessel shapes is held in memory 90 Accuracy : ±0.% (ambient temp. ) Resolution : mm or 0.%FS whichever greater Blanking : Programmable (min 0.m dependent on transducer) Transducers : RVY / RWV / RXM Power Supply : 0/0VAC ±0% 0/60Hz VA selectable or 4VDC % 0% 9W Relay output : SPDT 0VAC 8A 0VDC 8A (Resistance load) Analogue output : 4-/ 4mA 70 Serial output : RS/ RS48 Display : 4 digit mm LCD Ambient Temp : 70 Enclosure : IP6 Polycarbonate Dimensions : 44 x 96 x mm Weight :.7kg
RYV RYT (Inbuilt Temp Sensor) MULTIFLEX TRANSDUCER Face material : Epoxy Max range liquids : m Ambient temp : 90 Haz. area : EExm T6 Mounting : M x P. OPTION 0m RWV RWT (Inbuilt Temp Sensor) Face material : PVDF Max range liquids : m Ambient temp : 90 Haz. area : EExm T6 Terminal Box 0 G /4 7 4 RYVF /RWVF RVTF /RWTF (Inbuilt Temp Sensor) 0m Face material : Epoxy / PVDF Max range liquids : m Ambient temp : 90 Haz. area : EExm T6 Weight : Flange size Flange(plastic) 4"/" ASME, DN80/00 Aiming kit Terminal Box T *The min. dead band and the max.range are varied by the operating temperature and environments. 9 6 Controller Channel 70 Flow output Weir Measuring Flow at Open Channel Weir Build a weir and measure the upstream level. It can come up with flow measurement in setting up the inbuilt functionality of Weir Flow Conversion. Adjustable angle about T about 0 Downstream sensor Controller Dust extractor Channel ISOLATION KIT Output of differential level Kit to prevent oscillation loss of ultrasonic wave(standard) M P. Upstream sensor 48 Measuring Differential Level The mechanism is that each sensor is installed at upper and lower locations of the dust extractor and a controller measures differential level. The device is used for the automatic operation of a dust extractor and can be applied to floodgate control as well. Attached Isolation Kit Unused 4
RELAY RELAY RELAY ECHO BACK INCREASE DIGIT (MODIFY) OPTION / DIGIT ULTRASONIC LEVEL INDICATOR MINIFLEX LR CONTROLLER For Liquids 8 7 98 06. MINIFLEX LR LEVEL CONTROLLER 0.4 9. Compact but Highly Functional Measure Level Measure Empty distance Measure Volume 4 Measure Differential level Pump control 6 Weir flow Expiosion EExm T6 Accuracy : ±0.% (ambient temp. C) Resolution : mm or 0.%FS whichever greater Blanking : Fully Programmable Transducers : RYV / RYT / RWV / RWT Power Supply : 9/0/0VAC ±0% 0/60Hz VA selectable or 4VDC +% ~ 0% 9W Relay output : SPDT 0VAC 8A 0VDC (Resistance load) Analogue output : 4-/ ~ 4mA 70 Serial output : RS/ RS48 Display : Multiline Ambient Temp : - ~ +70 C Enclosure : IP6 Polycarbonate Dimensions : 8 x x 9.mm Weight :.kg RYV RYT MINIFLEX CONTROLLER (Inbuilt Temp Sensor) Face material : Epoxy Max range liquids : 0m Max range solids : m Ambient temp : 90 Haz. area : EExm T6 Mounting : M x P. OPTION 0m RWV RWT (Inbuilt Temp Sensor) RYVF /RWVF RVTF /RWTF (Inbuilt Temp Sensor) Face material : PVDF Max range liquids : 0m Max range solids : m Ambient temp : 90 Haz. area : EExm T6 Face material : Epoxy / PVDF Max range liquids : m Ambient temp : 90 Haz. area : EExm T6 Weight : varied by flange size 7 G /4 Kit to prevent oscillation loss of ultrasonic wave (standard) 0 Terminal Box ISOLATION KIT M P. 4 T 48 Flange(plastic) 4"/" ASME, DN80/00 Isolation Kit *The min. dead band and the max.range are varied by the operating temperature and environments. Attached Unused
Integral Amplifier Two-wire Loop Powered Simple to Calibrate and Use Empty Distance and Span can be entered TWO WIRE ULTRASONIC LEVEL For Liquids FEATURES The setup is simple as you set up with push buttons while seeing the LCD. You can select to indicate LCD either by meter, feet or inch The transducer material consisting of PVDF that is corrosion resistant, it can have a wide range of applications. It has a False Echo Rejection function that enables the instrument to identify two fixed obstructions, memorize their position and ignore them during the measuring process. Principle of Operation An ultrasonic pulse is emitted from a sensor down towards the media and is reflected back from the surface. The time it takes to travel from/to the sensor is proportional to the distance traveled. OUTLINE DIMENSIONS 4 77 80 0 0 Cable gland M.mm. 67. 4. 96 0 8 Main body Mounting portion Probe Accuracy : mm (<m) / 0.%FS (>m) Resolution : mm Max. range : 8m Min. dead band : 0.m Power Supply : -0VDC(two wire loop powered) Analogue output : DC4-mA 70 Serial output : Display : digital LCD Ambient Temp : 70 Housing : Glass filled nylon Wet side : PVDF Protection : IP67 Weight : 80g MOUNTING GUIDELINES Below. Display Push buttons for setup INTERIOR Over0.88m 0. 8m Over 0.m Below 0.m 6
HYCONTROL VISION SYSTEM REFLEX/SCANFLEX & MULTIFLEX can be connected to PC with serial outputs. A dedicated software (option) can be used to allow all echoes of ultrasonic waves to be viewed in trend analysis, thus enabling to make a higher degree of setup. Please inform us of the following when referring and ordering Object to be measured Type Powder Solids Lump Liquids Slot Shape 4 Repose angle Hopper height Degree Sensor 6 Cone height 7 Measurable range 8 Hopper diameter 7 9 Umbo 0 Agitator Yes No Yes No 6 Means of carriage Mounting position Slot position 4 Temp in a tank Ambient Temp. From slot From tank wall Center / From center Sensor Control Unit 8 Dust 9 Corrosion 8 Yes No Yes No Y N Aiming kit 6 Pressure in a tank Yes KPa None Nozzle height 7 Moisture Mounting standard Flange size Line of business Rotary Paddle Type Level Switch Vibration Type Level Switch Swing Type Level Switch Acoustic Level Switch Capacitance Type Level Switch Capacitive Proximity Sensor Capacitance Type Level Indicator Diaphragm Type Level Switch Tilt Switch Leak Type Level Switch Microwave Switch Sounding Bob Type Level Indicator Flow Switch Conductance Type Level Switch Float Switch Float Type Level Indicator Ultrasonic Type Level Indicator Equipments For Conveyor Lines Dust Monitor System Zirconia Oxygen Analyzer Laser Type Level Indicator RADAR Type Level Indicator On-line Sensors for Accurate Liquid Analysis Ultrasonic Flow meter Nuclear Power Generation to Rice Milling All-round Manufacturer of Level Controllers for Powder, Granules and Liquid Agent *Please be sure to read USER'S GUIDE, Installation & Operation Instructions before using the instrument. *The specifications herein may be subject to change without advance notice.