Catalog 8-4/USA Small, Low-Voltage Digital Servo Drive The (Small, Low-Voltage Drive) is a powerful and compact digital servo drive available for use with 24V input providing up to 5 Amps of continuous current (RMS). This equates to 1.5kW of shaft power. It accepts standard drive signals ±1V analog and step & direction signals. In addition to standard drive operation, the has simple position control functionality. The user has the ability to set preset moves, program I/O, solve following applications and carry out camming functions. It also has an internal PLC for simple machine control functions with up to 15 instructions. A CANBUS interface is also available. Part Numbering System 5 Small, Low-Voltage Drive Series Example: 5 Continuous Current Level 1 2 5 Optional Keypad part number SK13 KEYPAD Features Up to 5 Amps of continuous current (RMS) Optional keypad interface for drive configuration, monitoring and application commands Standard D-shell and removable screw terminal connectors Resolver feedback 24 VAC, 3-phase operation ±1V velocity and torque control Step & direction input for position control 24 Volt Keep Alive (required) RS422/485 communication CE (EMC & LVD) Additional control features Position preset mode drive can be set up to perform simple trapezoidal moves. Following (digital locking) drive can ration against encoder signal; acceleration and slip speeds can also be set. Electronic cam profiling cam profiling up to 257 elements. CANBUS interface can be used in communication mode and in real-time mode. Internal PLC drive can be programmed via keypad or with a ladder diagram system. - Scan time: 6.144 ms - Timers: 2 - Instructions: 15 - Stack depth: 1 - Program steps: 64 - Mathematics operation: 16/32 bits - Fast inputs (fast copy): 3-512 microseconds 128 Parker Hannifin Corporation
Catalog 8-4/USA Specifications Common Specifications 1 2 5 Drive Input Power Voltage 23V±1% 23V±1% 23V±1% Phase 3 3 3 Frequency 5/6 Hz 5/6 Hz 5/6 Hz Drive Output Power Bus voltage @ 24VAC 34VDC 34VDC 34VDC PWM 8kHz 8kHz 8kHz Continuous current (peak of sine) 1.75A 3.54A 7.7A Continuous current (RMS) 1.24A 2.5A 5A Peak current (peak of sine) 3.54A 7.7A 14.14A Peak current (RMS) 2.5A 5A 1A Commutation Sinusoidal Sinusoidal Sinusoidal Performance Feedback Resolver Resolver Resolver Inputs Command velocity and torque mode ±1V ±1V ±1V Command position mode Step/direction input Step/direction input Step/direction input 8kHz max 8kHz max 8kHz max Digital inputs (2+2) 24V 24V 24V Encoder input 2kHz max pre-quad 2kHz max pre-quad 2kHz max pre-quad Analog input - Auxiliary ±1V (1 bit) ±1V (1 bit) ±1V (1 bit) Outputs Digital outputs (2 outputs) 24V/1mA/PNP 24V/1mA/PNP 24V/1mA/PNP Encoder output 45Hx max 45Hx max 45Hx max Analog output - Auxiliary ±4.5V (8 bit) ±4.5V (8 bit) ±4.5V (8 bit) Communication Type RS422/485 RS422/485 RS422/485 Daisychain Up to 32 units Up to 32 units Up to 32 units Power Dissipation Control stage 18W 18W 18W Power stage 18W 28W 45W Internal braking resistor 6W 6W 6W Environmental Temperature 113 F (45 C) 113 F (45 C) 113 F (45 C) Protection Grade IP2 IP2 IP2 Compumotor Motors BE, J and NeoMetric Series BE, J and NeoMetric Series BE, J and NeoMetric Series B Find Your Local Factory Authorized Distributor at www. or Call 1-8-358-97. 129 Parker Hannifin Corporation
Catalog 8-4/USA Speed-Torque Curves Motor Speed-Torque Performance Curves with BE, NeoMetric and J Series motors, 23, 34, and 7mm frame, resolver feedback, 24 VAC For complete BE, Neometric, and J motor and cable information, please refer to Servo Motor section. BE23D/5 BE231F/5 BE232D/5 2 1.4 3 2.1 6 4.2 25 1.75 5 3.5 15 1.5 2 1.4 4 2.8 1.7 15 1.5 3 2.1 1.7 2 1.4 5.35 5.35 1.7 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 7 6 5 4 3 2 1 BE233F/5 BE341/5 N71DR/J71DR/5 4.9 7 4.9 35 2.45 4.2 3.5 2.8 2.1 1.4 6 5 4 3 2 4.2 3.5 2.8 2.1 1.4.7 1.7 5.42 1 2 3 4 5 1 2 3 4 5 15 3 45 6 75 3 25 2 15 1 2.1 1.75 1.4 1.5.7 6 5 4 3 2 1 N72E/J72E/5 15 3 45 6 75 4.2 3.5 2.8 2.1 1.4.7 8 7 6 5 4 3 2 1 N73F/J73F/5 15 3 45 6 75 5.6 4.9 4.2 3.5 2.8 2.1 1.4.7 CONTINUOUS PEAK 34V For complete motor and cable information, please refer to the Motor Cable Table at the end of the Servo Motors section. 13 Parker Hannifin Corporation
Catalog 8-4/USA Connections Terminal Board X1 Resolver/Input DB9 Female X2 Com/Bus DB9 Male X3 Encoder In/Out 1 + ECC 2 - ECC 3 SIN + 4 SIN - 5 COS + 6 COS - 7 V 8 V 9 IN 1 IN 1 1 TX 2 RX 3 /TX 4 /RX 5 CANH 6 +BR18 7 -BR18 8 CANL 9 V 1 PHA 2 /PHA 3 PHB 4 /PHB 5 PHC 6 /PHC 7 V 8 Not used 9 Not used Terminal Board X4 CMD/Analog I/O Terminal X6 Power 1 ANALOG REFERENCE + 2 ANALOG REFERENCE - 3 V 4 AUXILIARY ANALOG INPUT + 5 AUXILIARY ANALOG INPUT - 6 V OUT 7 OUT /IN 2 8 OUT 1/IN 3 9 + 24 V 1 V 1 MOTOR PHASE U 2 MOTOR PHASE V 3 MOTOR PHASE W 4 LIVE 1 (L1) 5 LIVE 2 (L2) 6 LIVE 3 (L3) 7 PE B Find Your Local Factory Authorized Distributor at www. or Call 1-8-358-97. 131 Parker Hannifin Corporation
Catalog 8-4/USA Dimensions Dimensions in inches (mm).28 (7.2) 1.42 (4.) 3.39 (86.).57 (14.7).69 (17.5) 5.49 (139.6) 2.52 (64.1).79 (2.1) 5.56 (141.2) 5.9 (129.) 2.11 (53.5) 2.99 (76.) 3.17 (8.5) 2.9 (53.) 1.99 (5.5).2 (5.).2 (5.).2 (5.) 3.9 (99.2).9 (22.9).4 (1.) 4.56 (115.7) 132 Parker Hannifin Corporation