WIHA Tools Canada Valid until Dec 31st, 2012 25% On Wiha Quality Tools Drive-Loc 33 Pc. Multi Blade Tray Set Includes Both Soft Cushion Grip & MicroFinish Non-Slip Grip Handles Slotted: 3, 3.5, 4, 4.5, 5.5, 6, 6.5 Phillips: #0,#1 & #2 Square: 1 & 2 TORX: T6,7,8,9,10,15,20, 25,30,40 Nut Drivers: Inch 3/16, 1/4, 5/16, 11/32, 3/8, 7/16, 1/2 Metric: 5.5, 6, 7, 8, 9, 10,11mm HEX Inch: 3/32, 7/64, 1/8, 9/64, 5/32, 3/16 HEX Metric: 2, 2.5, 3, 4, 5, 6mm Molded Storage Tray: 11.5" x 20" x 2.25" Set Includes 48 Driver Sizes Secure Blade Locking Hard Chromed Protection Adjustable Blade Lengths from 1.7" to 4.7" in 1/8" Increments Reg. 461.98 346 49 item # 28191 5 Pc. Drive- Loc VI Interchangeable Slotted, Phillips and Square Set Soft-Grip Drive-Loc Handle Slotted: 3.5, 4.5, 5.5, 6.5, Phillips: #1 & #2 Square: #1 & #2, In Rugged Canvas Storage Pouch Reg. 84.34 63 26 item#: 28194 39 Piece Security Bit Set With Standard Handle & Magnetic Bit Holder Security Bits: TR Hex, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32 TR TORX, TR8, 10, 15, 20, 25, 27, 30, 40 Spanner - #4, #6, #8, #10 Tri-Wing - #1, #2, #3, #4 Torq-Set - #6, #8, #10 Standard Bits: Square - #1, #2, #3 PoziDriv - #0, #1, #2, #3 Slotted - 6.5, 8.0 Phillips - #1, #2 Reg. 113.44 85 08 item# 71990 New 51 Piece Precision Tech Set In Rugged Molded Tray Storage Each Tool Location Marked With Size For Fast Identification Slotted: 0.8, 1.0, 1.2, 1.5, 1.8, 2.0, 2.5, 3.0, 3.5, 4.0mm Phillips: #000, 00, 0, 1 Hex Metric: 1.3, 1.5, 2.0, 2.5, 3.0, 4.0mm Hex Inch:.028,.035,.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32 Torx: T1, 2, 3, 4, 5, 6, 7, 8, 9, & T10 Nut Drivers: 1.5, 1.8, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5mm Chip Lifter: 1mm x 2mm Molded Tray: 11.5" x 20" x 2.25" Reg. 373.52 280 14 # 92191 ErgoStar 9pc Metric Ball End Hex Set 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm Extra Long Keys With Durable Hard Chromed Surface item # 66996 ErgoStar 13pc Inch Ball End Hex Set item # 66988.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, & 3/8" ErgoStar 22 Pc Inch & Metric Combo Ball End Hex Set 13pc Inch:.050, 1/16, 5/64, 3/32, 7/64 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, & 3/8" 9pc Metric: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm item # 66982 Reg. 39.98 29 98 Reg. 55.98 41 98 Reg. 93.78 70 34
Adjustable Torque Control Vario-S Handle With Reading Scale Tools Marked with Serial No. & Include Calibration Certificate Meets ASME B107.14m, EN ISO 6789, BS EN 26789 Includes 4mm MicroBit Holder In Newton Meter Secure Torque Setting, Requires torque adjustment tool Guaranteed accuracy to 5000 cycles or 1 year (+/-6% Accuracy Rate), *(+/-10% Accuracy Rate) Slotted, Phillips, Torx, Torx Plus, Inch & Metric Hex Blades Available In Inch Lbs. No. Nm Scale 28550* 0.1-0.6 Nm 28551* 0.4-1.0 Nm 28552 0.8-2.0 Nm 28553 1.0-5.0 Nm 28554 2.0-8.0 Nm Increments 0.2 Nm 0.5 Nm 0.5 Nm 0.20 Nm 0.25 Nm List 170.72 170.72 187.80 192.96 204.88 Sale 128.04 128.04 140.85 144.72 153.66 No. 28501* 28502 28504 28506 28508 Inch Lbs. 15-80 (in/oz) 5-10 7.5-20 10-50 20-70 Increments 2.5 (in/oz) 0.5 (in/lbs) 0.5 (in/lbs) 2.0 (in/lbs) 2.0 (in/lbs) List Sale 163.92 122.94 163.92 122.94 182.48 136.86 187.68 140.76 199.82 149.87 Bit Holder Adapter For 1/4 Drive Bits, CVM Steel item # 28581 Socket Adapter For 1/4 Sockets, CVM Steel item # 28582 6 Pc. TORX SoftFinish Screwdrivers Set Sizes: T6, T7, T8, T9, T10, T15 Reg. 17.12 12 84 Reg. 16.38 12 28 Reg. 43.80 32 85 item # 36291 19 Piece Quick Change Bit Belt Pack In Rugged Belt Mounted Porta Pack Canvas Pouch Power Bits Slotted: 5.5, 6.5 Phillips: #1, #2, #3 Square: #1, #2, #3 Nut Drivers: 1/4, 5/16, 3/8 Insert Bits Torx: T10, 15, 20, 25, 27, T30 Automatic Quick Release: Magnetic Bit Holder For both Insert & Power Bits Reg. 74.10 55 58 item # 74990 8 Pc. Precision Slotted & Phillips Screwdrivers Set in Pouch Reg. 60.00 45 00 8 Pc. TORX PoerHandle Screwdrivers Set Sizes: T6, T8, T10, T15, T20, T25, T27, T30 Reg. 72.50 54 38 item # 26199 Slotted: 1.0-2.0-3.0-4mm Phillips: # 000, -#00, #0, #1 item # 36292 7 Pc. Precision Slotted & Phillips Screwdrivers Set Slotted 1.5mm, 2.0mm, 2.5mm, 3.0mm, Phillips -#00, #0, #1 Reg. 40.38 30 29 8 Pc. Precision TORX Screwdrivers Setin Pouch Sizes: T3, 4, 5, 6, 7, 8, 9, & T10 Reg. 70.32 52 74 item # 26799 item # 26190
6 Pc. Insulated Slotted, Phillips and Square Screwdrivers Set item # 35891 Slotted 3.0,5.5mm, Phillips #1, 2 & Square #1,2 Reg. 62.86 47 15 9 Pc. Insulated Pliers & Cutters Set in Tray 9.0 Lineman s Pliers 8.0 High Leverage Combo Pliers 6.3 & 8.0 Long Nose Pliers 8.0 Cable Cutters 6.3 & 8.0 Diagonal Cutters 7.0 Crimping Pliers Molded Storage Tray: 11.5" x 20" x 2.25" Reg. 494.14 296 49 SAVE 40% Industrial Finish with Dynamic Joint item # 32999 7 Piece Insulated 3/8" Drive Hex Bit Socket Set Set Includes: 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2 Insulated 3/8" Drive Ratchet 7.5"/190mm Overall Length Electricians Switch Cabinet Key Square 5, 6, 8mm, Triangle 9mm,2-way Key Bit, Slotted and Phillips Insert Bits, Zinc Finish Reg. 289.44 217 08 item # 31890 Reg. 282.88 212 16 item # 12852 Reg. 42.98 32 23 item # 21103 14 Pc. Insulated Pliers, Cutters and Slimline Screwdrivers Set Insulated SlimLine Screwdrivers Slotted: 9/64,3/16,1/4 Phillips: #1, #2, Square: #1, #2, Terminal Block: #2 Voltage Detector Long Nose Pliers 8" Lineman's Combo Pliers 9" High Leverage Cutter 8" Stripping Pliers 6.3" Cable Cutter 8 Up to 33% Narrower Than Standard Insulated Tools 15 Pc. Insulated Slimline Interchangeable Screwdrivers Set Interchangeable Multi Blade Roll Sets Slotted: 3.0, 4.0, 5.5, 6.5mm, Phillips: #1, #2, Terminal: #1, #2, Square: #1, #2, Torx: T8, T10, T15, T20 Reg. 624.34 468 26 item# 32869 Insulated Screwdrivers & Nut Drivers Slotted: 1/8, 3/16, 1/4" Phillips: #1 & #2 Metric Nut Drivers: 7,8,10,13mm Inch Nut Drivers: 1/4, 5/16, 11/32, 3/8, 7/16, 1/2" Square: #1 & #2 Terminal Drivers: #1, #2 Wiha Special CRM-72 Tool Steel Blades Reg. 215.36 161 52 item# 28390 25 Pc. Insulated Master Electricians Set Insulated Pliers & Cutters Long Nose Pliers w/cutters 8" Lineman's Combo Pliers 9" High Leverage Cutter 8" Stripping Pliers (AWG 4-24) 6.3" 1 Insulated Electricians Knife 7.2" 1 Poly Glass Fiber Folding Ruler item# 32879 Reg. 660.50 495 38
WIHA Master Electricians 80 Pc. Insulated Tool Set 1000 V Insulated Tools Tools are 10,000 Volt Tested 1000 V Rated All Tools Comply with one or more of The following Insulation VDE, ASTM, CSA, OSHA, EN/IEC, NFPA item# 32800 Reg. 2788.84 2091 63 Insulated Pliers & Cutters 2 Long Nose Pliers (7.9") & (6.3") 1 Bent Nose Pliers (6.3") 1 Lineman's Pliers with Crimper (8.9") 1 Diagonal Cutter (6.3") 1 Heavy Duty High Lev Cutter (7.9") 1 Stripping Pliers (6.3") 1 Multi Strand Cable Cutter (6.3") 1 Flat Nose Pliers (6.3") 1 Adjustable Wrench (8") Insulated Sockets 3/8" Drive 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8 13, 14, 15, 17, 19, 20, 22mm Insulated 3/8" Drive Ratchet Insulated 3/8" Drive 5" Extension Insulated Voltage Detector 3.0mm Slotted Tip Amber Light Insulated Drivers Slotted: 2.5, 3, 3.5, 4, 4.5, 5.5, 6, 6.5, 8, 10mm Phillips : #0, #1, #2, #3 Terminal Drivers : #1 & #2 Square Drivers: #1 & #2 Inch Nut Drivers: 7/32, 1/4, 5/16, 3/8, 7/16 Metric Nut Drivers: 5, 5.5, 6, 7, 8, 10, 13mm T-Handle Inch Hex: 5/32, 3/16, 7/32, 1/4, 5/16, 3/8" T-Handle MM Hex: 4.0, 5.0, 6.0, 8.0mm Hex L-Keys: 1/2" & 10mm Torx Drivers: T6, 7, 8, 9, 10, 15, 20, 25, 30 Insulated Knife 8.5" Ruler 78" Job Site Folding Ruler Tool Box - Rolling Water Tight Travlling Rugged 23" Tool Box Distributed by: Wiha Tools Canada 249 Summerlea Road, Brampton, ON. L6T 4X4 T: 1-866-494-0096 F: 1-800-494-7456 www. wihatools.ca
Insulated Industrial Pliers & Cutters IEC, VDE, EN, 10,000 Volt tested 1000 Volt Rated Induction hardened jaws and cutters to 60 HRC 1000V Industrial brushed finish Two component ergo cushion grip handles New dynamic joint provides 40% easier cuts & significantly longer tool life Insulated Lineman s Pliers With Crimpers Long life high performance dynamic 60/40 joint 32917 Insulated Industrial Lineman s Pliers 5-In-1 Professional Design Insulation According to EN/IEC, ASTM, NFPA70E & CSA, up to 1000 volt. Individually Tested. Deep cut radius conduit jaws for non-slip handling. Sure grip knurled & cross hatched flat jaw for non-slip griping. Extra long induction hardened precision matched cutting edges. Lower crimping jaw accepts most standard non-insulated electrical connectors. Large head with square anvil surface on each side. Premium CV tool steel forgings. Cutting Capacity 32917 225 9.0 #4 1.98 64.38 48.29 Insulated Long Nose Pliers With Cutters 329 Insulated Industrial Long Nose Pliers With Cutters. Insulation According to VDE 0682/part 201, EN/IEC 60900, ASTM F-1505-01, NFPA70E & CSA, up to 1000 volt. Individually Tested. Drop-forged from special tool steel, cutters additionally induction hardened (approx. 60 HRC), half-round jaws, serrated gripping surface. Industrial brushed finish. Ergonomic comfort grip with slip guard. Cutting Capacity 32926 160 6.3 #10 1.36 32923 200 8.0 #8 1.46 44.78 53.18 33.59 39.89 Insulated Diagonal Cutters Long life high performance dynamic 60/40 joint 329 Insulated Industrial Diagonal Cutters. Insulation According to VDE 0682/part 201, EN/IEC 60900, ASTM F-1505-01, NFPA70E & CSA, up to 1000 volt. Individually Tested. DIN ISO 5749 Low wear lap joint, riveted and able to withstand high levels of load. Lightweight action, clean cutting. Long term cutting is achieved through additional inductive hardening to approx. 60 HRC. Special tool steel hardened and tempered. Industrial brushed finish. For soft, medium hard wire & piano wire. Cutting Capacity 32933 160 6.3 #6 1.64 32929 200 8.0 #6 1.80 44.78 55.98 33.59 41.99
Toll Free: (866) 494.0096 Insulated Industrial Pliers & Cutters Insulated Combo Pliers With Dynamic Joint 32930 Insulated Industrial High Leverage Combination Pliers. Insulation According to EN/IEC 60900, ASTM F-1505-01, NFPA70E & CSA, up to 1000 volt. Individually Tested. DIN ISO 5746 Extra long cutting edge for flat and round cables. Serrated jaws. Cutting edges additionally induction hardened to approx. 60HRC. Use for gripping, pulling & holding as well as cutting wires and cables ranging in hardness from soft to extremely hard. Industrial brushed finish. Two component soft grip ergonomic handles. Cutting Capacity 32930 200 8.0 #4 1.92 54.58 40.94 Long life high performance dynamic 60/40 joint Insulated Heavy Duty Cable Cutters 32927 Insulated Industrial Serrated Edge Cable Cutters. Insulation According to VDE 0682/part 201, EN/IEC 60900, ASTM F-1505-01, NFPA70E and CSA, up to 1000 Volt. Individually Tested. Light, clean cutting ground precision cutting edges. Durable cutting is achieved through additional inductive hardening to approx. 60 HRC. Premium CV tool steel forgings. For cutting of copper & aluminum cables without crushing. Two component ergo cushion grips for best user comfort. Ø mm2 Pkg. lbs. 32927 200 8.0 20 60 1.78 55.98 41.99 Insulated Crimping Pliers 32945 Insulated Industrial Crimping Pliers. Insulation According to VDE 0682/part 201, EN/IEC 60900, ASTM F-1505-01, NFPA70E and CSA, up to 1000 Volt. Individually Tested. Semi-circular profiles for secure connection between end sleeve and conductor. Long life is achieved through additional induction hardening to 60 HRC. Industrial brushed finish. Two component ergo cushion grips for best user comfort. Crimps 6-30 AWG Connectors. mm2 AWG Pkg. wt. 32945 180 7.0 0.25-2.5 6-30 1.64 55.70 41.78 Insulated Stripping Pliers 32947 Insulated Industrial Stripping Pliers. Insulation According to VDE 0682/part 201, DIN 7437, EN/IEC 60900, ASTM F-1505-01, NFPA70E & CSA, 1000 volt rated. Individually Tested. DIN ISO 5745 Made from Premium CV tool steel forgings. Induction hardened jaws and cutters to 60 HRC. Industrial brushed finish. Two component ergo cushion grips for best user comfort. Spring & adjusting screw, for stripping up to Ø 5mm/#4 Awg. Stripping Capacity 32947 160 6.3 #4 - #28 1.46 50.38 37.79
www.wihatools.ca Insulated Industrial Pliers & Cutters Wiha Insulated Industrial Tool Sets In Belt Pack Pouch 32985 7 Pc. Insulated Industrial Pliers/Cutters & Screwdrivers 32983 5 Pc. Insulated Industrial Diagonal Cutters & Screwdrivers No. Insulated Pliers/Cutters & Screwdrivers Insulation According to VDE 0682/part 201, DIN EN 60900, EN/IEC 32985 8.0 Combo Pliers 60900, ASTM F-1505-01, NFPA70E, up to 1000 volt. 6.3 Long Nose Pliers lbs. Individually Tested. 6.3 Diagonal Cutters 2.30 No. Insulated Diagonal Cutters: Insulated Screwdrivers: 32983 6.3 /160mm Diagonal Cutters lbs. Slotted: 3.0, 4.5mm Insulated Screwdrivers: 1.17 Phillips: #1, #2 221.18 165.89 Slotted: 3.0, 4.5mm Phillips: #1, #2 77.54 58.16 32981 3 Pc. Insulated Industrial Pliers & Cutters. Insulation According to VDE 0682/part 201, DIN EN 60900, EN/IEC 60900, ASTM F-1505-01, NFPA70E, up to 1000 volt. Individually Tested. No. 32981 Insulated Pliers & Cutters 8.0 Combo Pliers lbs. 8.0 Long Pliers 2.18 8.0 Diagonal Cutters Reg. 163.72 122.79 32984 6 Pc. Insulated Industrial Combo Pliers & Screwdrivers Insulation According to VDE 0682/part 201, DIN EN 60900, EN/IEC 60900, ASTM F-1505-01, NFPA70E, up to 1000 volt. Individually Tested. No. 32984 Insulated Combination Pliers: 8.0 Combination Pliers lbs. 8 Long Nose Pliers 2.06 Insulated Screwdrivers: Slotted: 3.0, 4.5mm Phillips: #2 Square: #2 Reg. 152.66 114.50
Insulated Industrial Pliers & Cutters Wiha Insulated Industrial Tool Sets In Roll Out Pouches In Roll Out Pouch 32988 22 Pc. Pliers & Cutters Set. Insulation According to VDE 0682/part 201, DIN EN 60900, EN/IEC 60900, ASTM F-1505-01, NFPA70E, up to 1000 volt. Individually Tested. In Roll Out Pouches No. Set Includes: 32988 6.3 & 8.0 Diagonal Cutters lbs. 8.0 Long Nose Pliers 5.74 9.0 Lineman s w/cutters 8.0 Cable Cutters 7.0 Crimpers 15 Pc. SlimLine Blade Set Includes: Blade Holder Slotted: 3.0, 4.0, 5.5, 6.5mm Phillips: #1, #2 & Xeno: #1, #2 : T8, T10, T15, T20 & Square: #1, #2 SAVE 40% 699.98 524.99 32986 11 Pc. Pliers & Screwdriver Set. Insulation According to VDE 0682/part 201, DIN EN 60900, EN/IEC 60900, ASTM F-1505-01, NFPA70E, up to 1000 volt. Individually Tested. In Roll Out Pouch No. Set Includes: 32986 6.3 Long Nose Pliers lbs. 6.3 Diagonal Cutters 3.62 8.0 Combination Pliers Insulated Slotted: 3.0, 4.5, 5.5mm Insulated Phillips: #1, #2 Insulated Square: #1, #2 In Roll Out Pouch 271.58 203.69 32999 9 Piece Insulated Industrial Pliers & Cutters Set Insulated pliers & cutters set in a light weight tool box tray. No. 32999 Set Includes: 9.0 Lineman s Pliers lbs. 8.0 High Leverage Combo Pliers 6.34 6.3 & 8.0 Long Nose Pliers 8.0 Cable Cutters 6.3 & 8.0 Diagonal Cutters 7.0 Crimping Pliers Tool box set in blow molded tray 494.14 296.49 32987 8 Pc. Pliers & Cutters Set. Insulation According to VDE 0682/part 201, DIN EN 60900, EN/IEC 60900, ASTM F-1505-01, NFPA70E, up to 1000 volt. Individually Tested. In Roll Out Pouch No. Set Includes: 32987 6.3 & 8.0 Long Nose Pliers lbs. 6.3 Diagonal Cutters 5.52 8.0 H.D. Diagonal Cutters 9.0 Lineman s w/cutters Distributed by: 8.0 Cable Cutters 7.0 Crimpers 447.98 335.99 (866)494-0096 fax: (763)295-6598 www.wihatools.ca Sale Prices Good Through December 31, 2012