CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board/ACLASS 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Kistler Instrument Corporation 75 John Glenn Drive Amherst, NY 14228 has been assessed by ACLASS and meets the requirements of international standard ISO/IEC 17025:2005 and national standard ANSI/NCSL Z540-1-1994 while demonstrating technical competence in the field(s) of CALIBRATION Refer to the accompanying Scope(s) of Accreditation for information regarding the types of calibrations to which this accreditation applies. AC - 1117 Certificate Number ACLASS Approval Certificate Valid: 05/01/2014-07/07/2016 Version No. 004 Issued: 05/01/2014 901-344a-07.14 This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated January 2009).
ANSI-ASQ National Accreditation Board/ACLASS SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 Kistler Instrument Corporation 75 John Glenn Drive Amherst, NY 14228 www.kistler.com Fred Bartz fred.bartz@kistler.com Phone: 716-213-5752 And satellite site located at 30280 Hudson Drive Novi, MI 48377 Bruce Noland www.bruce.noland@kistler.com Phone: 248-668-6843 CALIBRATION Valid to: July 7, 2016 Certificate Number: AC-1117 I. Electromagnetic - DC/Low Frequency PARAMETER / Vibration 3 (0.5 to 20) 1.01 % Honeywell QA700 060-2273-001 Vibration, A, B, F, G 3 (5 to 2 000) 1.24 % Vibration, A, B, F, G 3 2, 4, (>2 000 to 10 000) 2.14 % Kistler Vibration System 8002K/5020 060-1304-001 Vibration, A, F, G 3 (>10 000 to 14 000) 3.12 % Version 017 Issued: 06/24/2014 Page 1 of 5
Vibration, A, F, G 3 (>14 000 to 18 000) 4.08 % Vibration, A, F, G 3 (>18 000 to 20 000) 5.08 % Vibration, C 3 (5 to 2 000) 1.24 % Vibration, C 3 2, 4, (>2 000 to 10 000) 2.14 % Kistler Vibration System 809K112/5020 060-1304-001 Vibration, C 3 (>10 000 to 14 000) 3.12 % Vibration, C 3 (>14 000 to 18 000) 4.12 % Vibration, C 3 (>18 000 to 20 000) 5.12 % Vibration 6 (5 to <10) (10 to <20) (20 to 1 000) 100 (>1 000 to 5 000) (>5 000 to 10 000) 2.00 % 1.00 % 0.75 % 0.50 % 1.50 % 2.50 % Spektra Calibration System CS-18 060-2310-001 Vibration, Rotational 3 12.5 1.11 % Kistler Vibration System 8002K/5020 978-5384-701 Charge 3 (10 to 50 000) pc 0.18 % Charge 3 (10 to 2 000 000) pc 0.51 % Keithley LCZ Meter 3322 Kistler Charge Calibrator 5395A 060-6015-001 Version 017 Issued: 06/24/2014 Page 2 of 5
Gain Accuracy 2,3 0.5 to 150 0.11 % DC Voltage - Source 6 (-10 to 10 V) 0.1 V DC Voltage - Measure 6 (0 to 20) V 0.0095 V National Instruments Data Acquisition Board PXI-4461 Hewlett Packard Universal Source 3245A Keithley Digital Multimeter 2000 977-7645-701 060-2288-001 060-2289-001 II. Time & Frequency PARAMETER / Frequency - Measure 6 (0 to 20 000) 0.0046 Time - Measure 6 (0 to 150) µs 0.93 µs Agilent Universal Counter 53131A 060-2288-001 060-2289-001 III. Mechanical PARAMETER / Force, Dynamic 3 Up to 5 lbf 1.5 % Force, Impulse Hammer 3 Up to 5 000 lbf 1.3 % Rice Lake 5 lb Mass Agilent Spectrum Analyzer 3562A 978-8147-701 978-8121-701 Version 017 Issued: 06/24/2014 Page 3 of 5
Force, Static 3 Up to 50 000 lbf 0.18 % Force, Static 6 Up to 500 N Up to 5 000 N Up to 50 000 N 0.30 % 0.12 % 0.12 % Absolute 3 Up to 500 psi 0.37 % Sinusoidal 3 Up to 1 000 psi 0.42 % Dynamic Low 3 Up to 1 500 psi 0.33 % Morehouse Ring Dynamometers MTS Criterion C45-504 Load Frame Mensor Digital Pressure Gage 11900-401 Mansfield and Green Deadweight Tester 060-6016-001 060-2309-001 060-6013-001 060-2133-001 060-6014-001 Static 6 Up to 4 350 psi 0.42 % Reference Pressure Sensor 978-0303-702 Static 3 Up to 5 000 psi 0.18 % Mansfield and Green Deadweight Tester 060-0967-001 Static 3 Up to 15 000 psi 0.18 % Static 3 Up to 100 000 psi 0.56 % Mansfield and Green Deadweight Tester Sensotec High Pressure Transducer 060-0967-001 (Current) 4 Up to 1 500 psi 0.25 % (Voltage) 4 Up to 1 500 psi 0.2 % Mensor Digital Pressure Gage 600 680-0000-701 (Current) 4 Up to 5 000 psi 0.25 % Pressurements Dead Weight Tester Version 017 Issued: 06/24/2014 Page 4 of 5
(Voltage) 4 Up to 6 000 psi 0.2 % Pressurements Dead Weight Tester 680-0000-701 Velocity 6 Up to 330 kph 0.17 % Speed Measurement System 060-2266-701 Notes: 1. Calibration and Measurement Capability Uncertainties (Expanded Uncertainties) are based on approximately a 95% confidence interval, using a coverage of k=2. 2. Gain Accuracy is expressed as a ratio of input voltage to output voltage, therefore it has no units. 3. Calibration and Measurement Capability is expressed as a percent of reading. 4. Calibration and Measurement Capability is expressed as a percent of range. 5. This scope is part of and must be included with the Certificate of Accreditation No. AC-1117. 6. This calibration is performed at the Kistler Satellite Lab at 30280 Hudson Drive, Novi MI 48377. Vice President Version 017 Issued: 06/24/2014 Page 5 of 5