FARETTO LARGE LED. SPECIFICATION SHEET PAGE: 1 OF 2 Project name: Type: General information

FARETTO LARGE LED SPECIFICATION SHEET PAGE: OF 2 Project name: Type: General information Luminaire characteristics: Power input: 8W Lumens: TBC Luminaire efficacy: TBC Source: XICATO XSM Artist Series LED Module 000K: 95CRI, 500K and 4000K: 85CRI. Lumen maintenance: >70% of initial lumens at 50 000 hours (L70) LM-80 (LED) / LM-79 tested Configuration: 0 vertical (pan), and 270 horizontal (tilt) pivoting axes with locking screws. -/4" 8" Optics: Metalized PC reflector: 20,40 or 60 beam with clear acrylic protection screen. Mounting: Track: Track adaptor with circuit selector for two circuit tracks. Also, compatible with TEK or HTEK from Nordic Aluminium. Canopy: Round die cast aluminum canopy. Body: Aluminum housing and heatsink. Electrical: Integral high efficiency dimmable driver, 20-277V. Ø" 6-/4" FRONT VIEW -/4" Dimming: Compatible with Leading (TRIAC) and trailing edge (ELV) for 20V only. Finish: Natural or black matte anodized with black accent and black track adaptor or painted white RAL 900 with white track adaptor. Weight: lbs. (.6 Kg) including track adaptor. Warranty: 5 years limited warranty. Certification: culus listed. Ratings: Damp location. 6-/2" MAX. PROJ. SIDE VIEW DUE TO CONTINUOUS IMPROVEMENTS, THE INFORMATION HEREIN MAY BE CHANGED WITHOUT NOTICE. LAST UPDATE: MARCH 05, 204 920 Boul. St-Laurent, suite 00, Montréal (Québec) Canada H2N N7 P.: 54.52.9 F.: 54.525.607 www.sistemalux.com MGD - R

FARETTO LARGE LED SPECIFICATION SHEET Project name: Type: PAGE: 2 OF 2 ACCESSORIES (TO BE ORDERED SEPARATELY) * fixture can hold a maximum of accessories at a time 70 - Frosted lens INSTALLATION Sistemalux 2 circuit track 20V or 277V Canopy for 4" junction box 20-277V (UNV). 702 - Elliptic lens 70 - Soft focus lens 704-52 - Black hex cell louver MOUNTING Canopy (ceiling/wall) for 4" junction box 4-/2" Track 695-52 - Black cross baffle Length: 7/8" (22.5mm) 6-/4" 8" 705-52 - Black snoot Length: -/4" (44mm) 706-52 - Black visor Length: -/4" (44mm) ORDERING INFO MODEL - - - - LED OPTIC VOLTAGE FINISH MODEL LED OPTIC VOLTAGE FINISH 692 - Track 692C - Canopy 90-000K, 95CRI 85-500K, 85CRI 840-4000K, 85CRI 20-20 40-40 60-60 20-20V 277-277V 0 - White 5 - Natural matte anodized 52 - Black matte anodized DUE TO CONTINUOUS IMPROVEMENTS, THE INFORMATION HEREIN MAY BE CHANGED WITHOUT NOTICE. LAST UPDATE: MARCH 05, 204 920 Boul. St-Laurent, suite 00, Montréal (Québec) Canada H2N N7 P.: 54.52.9 F.: 54.525.607 www.sistemalux.com MGD - R

Arri 50 Watt Fresnel Tungsten Light (220V) 5002 B&H Photo Page of B&H Federal/GSA Government, Education & Corporate Students/Educators Español My Account Help Center About Us Welcome, Login/Register 800.606.6969 / 22.444.665 $59 95 Ends In 2 days 08:40:44 0 $0.00 Wish List Track Order Search by Keyword or Item # GO Shop Photography Computers Pro Video Lighting & Studio Pro Audio Mobile TVs & Entertainment Film, Tapes & Media Camcorders Security & Surveillance Binoculars & Scopes Underwater Darkroom A/V Presentation Passover Closing From April 2 at 7:00pm EDT through April, 205 Orders placed at this time will be processed after we reopen See Schedule Details Home Shop by Brand Arri Location & Studio Fresnel Arri Fresnel 50 Arri 50 Watt Fresnel Tungsten Light (220V) B&H # ARF50X MFR # 5002 SPECIAL ORDER Ship Time: -7 business days Free Standard Shipping Not eligible for free Expedited Shipping You Pay: QTY $4.95 (0) Write a review Q&A ADD TO CART WARNING: This is a "European Voltage" product and CANNOT be used in the USA. ADD TO WISH LIST Shown with Optional Equipment Like Tweet 0 0 0 Email Print Recommended Accessories OVERVIEW SPECS IN THE BOX REVIEWS ACCESSORIES Q&A Lamps /Tubes /Flashtubes Rating Socket (Lampholder) Lens (Condenser) Reflector (Mirror) Mounting Yoke 50W GY9.5 2" (50mm) low expansion borosillicate fresnel lens Spherical specular high purity aluminum 5/8" (6mm) stand mount Fits on standard 5/8" stand or mounting stud Required item: A lamp (not included) is required to operate this light. Arri - A248 Lamp for Arri 50W Fresnel (220V) You Pay: $.95 WARNING: This is a "European Voltage" product and CANNOT be used in the USA. + Wish List ADD TO CART Cable 5' (4.6 m) Focusing Worm gear driven Weight 2. lbs (kg) Light Stands & Accessories See More Required item: A light stand (not included) is necessary to mount this light. http://www.bhphotovideo.com/c/product/6427-reg/arri_5002_50_watt_fresnel_tu... 4//205

Arri 50 Watt Fresnel Tungsten Light (220V) 5002 B&H Photo Page 2 of Dimensions 5.25 x 7.75 x 6." (. x 9.7 x 5.6cm) Arri - AS- Lightweight Light Stand (8.') Shipping Info Shipping Weight.5 lb You Pay: $96.25 + Wish List ADD TO CART Box Dimensions (WxHxD) 6.9 x 5.9 x.0 Impact - Air-cushioned Light Stand (Black, 8') You Pay: $2.95 + Wish List ADD TO CART Light Controls See More Arri - Four Leaf Barndoor Set for Arri 50W Fresnel You Pay: $47.88 + Wish List ADD TO CART Reflectors Arri - Snoot for Arri 50W Fresnel You Pay: $44.5 + Wish List ADD TO CART Grip & Gaffer Gear See More ProTapes - Gaffer's Kit You Pay: $57.06 + Wish List ADD TO CART Light meters Sekonic - L-08DC DigiCineMate You Pay: $279.00 + Wish List ADD TO CART Misc Accessories and Adapters Impact - 2.0" End Jaw Vise Grip You Pay: $44.00 + Wish List ADD TO CART Customers Also Viewed: http://www.bhphotovideo.com/c/product/6427-reg/arri_5002_50_watt_fresnel_tu... 4//205

Arri 50 Watt Fresnel Tungsten Light (220V) 5002 B&H Photo Page of YOUR RECENTLY VIEWED ITEMS See any errors on this page? Let us know. Sales: 800.606.6969 or 22.444.665 Customer Service: 800.22.574 or 22.29.7765 Hours of Operation Directions to our NYC SuperStore WHY SHOP AT B&H Sign up for B&H news and special offers email address Sign Up Manage your Existing Subscription See sample Newsletter DealZone Alerts Weekly B&H Newsletter Help Choose Currency Company Information B&H Resources Change/Cancel Order US Dollar About Us Shop By Brand Contact Us Track/Request a Return International NY Superstore The Event Space Manufacturers Directory Sourcebooks & Catalogs Return Policy Language: English National Workshops B&H Gift Card Unsubscribe from Catalog Unsubscribe from Email Brasil Site Reviews & Awards Imaging Partners Browse our Winter 205 Interactive Catalog Shipping & Delivery Shipping Affiliate Program Send Us your Feedback Payments Payments Career Opportunities View our Mobile Site All Help Topics Customs Please note that B&H does not process web orders from Friday evening to Saturday evening. Weekend hours Recommend Follow Follow @bhphotovideo Like 578k 2000-205 B & H Foto & Electronics Corp.420 9th Ave, New York, NY 000 Privacy & Security User Agreement & Disclaimer Export Policy California Privacy Rights Site Map Prices, specifications, and images are subject to change without notice. Not responsible for typographical or illustrative errors. Manufacturer rebates, terms, conditions, and expiration dates are subject to manufacturers printed forms NYC DCA Lic.: Elec. Store #090672 Elec. & Home App. Serv. Deal. #0907905; Sec. Hd. Deal. Gen. #0907906 http://www.bhphotovideo.com/c/product/6427-reg/arri_5002_50_watt_fresnel_tu... 4//205

Cove FSD Fluorescent. Cove 50 [5.9] CAT #: PREP BY: DATE: PROJECT: TYPE: NOTES: 8 [.5] ORDERING LOGIC SPECIFICATIONS Housing: A profile of 50mm [5.90 ] x 8mm [.50 ]. Die formed post-painted 20- ga steel housing with knockouts on top and at the ends of the fixture. A quick access plate and removable lamp and ballast assembly simplify field maintenance. Fixtures are available in 60-, 95-, 220-, 2440-mm [2-, -, 4-, 8-ft] lengths. Optical System: Metalumen offers one of the most efficient cove lighting products in Optics FSD COV # of lamps Source Length Up Down Reflector Finish Ballast Circuitry Mounting Voltage IC # of Lamps Length Optics Up Finish Circuitry Voltage = Lamp 2 = 2 ft _ = Open Top W = White (Standard) = Circuit = 20 V = ft C = Clear Dust Cover C = Custom finish EM = Emergency/Night Light 2 = 277 V Specify RAL#: 4 = 4 ft Optics Down B = Battery = 47 V Source 8 = 8 ft _ = None (leave space empty) Mounting 4 = UNV (20-277 V) T5 Reflector Ballast COV = Cove Integrated Controls (IC) T5HO SPA = Specular Aluminum R = Programmed Rapid Start (T5 / T5HO) W = White Due to the Continuous Improvement Policy at Metalumen, we reserve the right to change our specifications without notice. the industry with an 8.8% efficiency. Choice of field variable mounting positions: horizontal, 2 or 24 degree angles. Computer modeled, formed, post painted steel reflector panels, or optional specular aluminum computer modeled reflector assemblies minimize socket shadows on the wall. FSD provides asymmetric distribution with peak candle power @ 5 degrees of 269. Efficiency 82.6%. D = 0-0V Dimming D2 = DALI Finish: White polyester powder coated paint finish with 9% reflectance is standard. Consult factory for custom colors/finishes. Weight:.9 kg/00mm [2.0 lb/ft] Mounting: Lamp and ballast assemblies are removable for ease of maintenance. Fixtures can be field installed without any disassembly and will accommodate flat, arched, floating or sloped ceiling Consult factory applications. Ballast: Programmed Rapid Start, 0-0V Dimming, DALI Integrated Controls: Consult factory. Approvals: Certified to NRTL and IES testing standards. This product is culus listed. Environment: Suitable for dry locations. WARRANTY LENGTHS Metalumen will warrant a one year parts and labour warranty. Warranty is valid if luminaire is installed and used according to specification. The Ballast will carry a standard 5 year warranty by the manufacturer. If defective, Metalumen will send replacement ballasts or drivers at no cost along with detailed replacement instructions and instructions on how to return defective components to Metalumen. 577 [22.7] 2 77 [46.4] 4 877 [4.5] 8 24 [92.2] FILE NAME: Cove_FSD_SPEC_SHEET 254 APPROVALS: Signature Date 570 Southgate Drive, Guelph, Ontario NG 4P6 Mailing Address: P.O. Box 779 Guelph, Ontario, NH 6Z9.800.62.6785 T 59.822.48 F 59.822.4589 www.metalumen.com SPECIFICATION SHEET PAGE

Cove FSD Fluorescent. Cove FEATURES COMMERCIAL // Commercial Lighting - With over 0 years of successful architectural lighting, providing unique concept and installation solutions has become second nature. Metalumen s Start to End Development Process results in unique performance, design and architectural requirements from concept through implementation. Metalumen s Lighting Solutions have been applied to customer projects requiring: high profile architectural installations; improved energy efficiency; retrofit installations; unique installations. Metalumen can provide top-quality innovative fixtures when and where they are needed and, at the same time, allow the customer to determine their level of involvement in Metalumen s Start to End Development Process. FIELD VARIABLE MOUNTING The cove series can be field mounted at several factory preset angles to provide variable beam distributions. Installation holes provided for each of the three mounting positions. Close ceiling applications. PHOTOMETRIC DISTRIBUTION AT CORNERS In order to minimize brightness in corner situations the following spacing and stop distances are suggested for corner installations. A - Stop at wall: B - Inside corner: C - Outside corner: ELECTRICAL QUICK CONNECT Knockouts are provided on top and at the ends of the fixture. All fixtures are prewired with push in quick connectors (B). In addition, the quick access plate (A) is removable to allow splice connections within the fixture. CORNER INSTALLATION Knockouts are provided on top and at the ends of the fixture to accommodate BX and conduit connectors (by others). In addition, the quick access plate (A) is removable to allow splice connections within the fixture. FILE NAME: Cove_FSD_SPEC_SHEET 254 570 Southgate Drive, Guelph, Ontario NG 4P6 Mailing Address: P.O. Box 779 Guelph, Ontario, NH 6Z9.800.62.6785 T 59.822.48 F 59.822.4589 www.metalumen.com SPECIFICATION SHEET PAGE 2

Cove FSD Fluorescent. Cove PHOTOMETRIC DATA T5HO LAMP File Name: FSD-T5HO-4-W-24 Luminaire Lumens: 597 Total Watts: 59 Efficiency: 82 % Efficacy: 6 lms/w Reflector: White Close ceiling applications. CANDLEPOWER DISTRIBUTION Vertical Angle Horizontal Angle COEFFICIENTS OF UTILIZATION Zonal Cavity Method Effective Floor Cavity Reflectance =.20 PHOTOMETRIC CURVE LUMINANCE DATA (CD/M 2 ) Vertical Angle Horizontal Angle 0 45 90 45 0 0 0 55 0 0 0 65 228 26 0 75 2856 449 0 85 658 905 25 T5HO LAMP File Name: FSD-T5HO-4-W-2 Luminaire Lumens: 602 Total Watts: 59 Efficiency: 82 % Efficacy: 6 lms/w Reflector: White CANDLEPOWER DISTRIBUTION Vertical Angle Horizontal Angle COEFFICIENTS OF UTILIZATION Zonal Cavity Method Effective Floor Cavity Reflectance =.20 PHOTOMETRIC CURVE LUMINANCE DATA (CD/M 2 ) Vertical Angle Horizontal Angle 0 45 90 45 0 0 0 55 0 0 0 65 0 0 0 75 852 42 0 85 24928 45 0 FILE NAME: Cove_FSD_SPEC_SHEET 254 570 Southgate Drive, Guelph, Ontario NG 4P6 Mailing Address: P.O. Box 779 Guelph, Ontario, NH 6Z9.800.62.6785 T 59.822.48 F 59.822.4589 www.metalumen.com SPECIFICATION SHEET PAGE

Cove FSD Fluorescent. Cove PHOTOMETRIC DATA T5HO LAMP File Name: FSD-T5HO-4-W Luminaire Lumens: 606 Total Watts: 59 Efficiency: 82 % Efficacy: 6 lms/w Reflector: White CANDLEPOWER DISTRIBUTION Vertical Angle Horizontal Angle COEFFICIENTS OF UTILIZATION Zonal Cavity Method Effective Floor Cavity Reflectance =.20 PHOTOMETRIC CURVE LUMINANCE DATA (CD/M 2 ) Vertical Angle Horizontal Angle 0 45 90 45 0 0 0 55 0 0 0 65 0 0 0 75 0 0 0 85 0 0 0 FILE NAME: Cove_FSD_SPEC_SHEET 254 570 Southgate Drive, Guelph, Ontario NG 4P6 Mailing Address: P.O. Box 779 Guelph, Ontario, NH 6Z9.800.62.6785 T 59.822.48 F 59.822.4589 www.metalumen.com SPECIFICATION SHEET PAGE 4

H recessed 99

H abacus elements direct recessed 2' x 2' LED 4 regressed lens HTD lens 2ft on center t-bar to t-bar LED 2 boards in cross per foot watts/ft lumens/ft LS 0 200 LH 20 2400 Lumens at board at 4000k. Consult IES files online for delivered lumens. Specifications subject to change. Available Light Platforms: Available Mounting: LED T5 T8 recessed 200 www.alights.com a l i g h t

H abacus project type quantity interior Mounting: Universal T-Bar: Flange is designed to fit into both 9/6 and 5/6 standard T-Bar systems. For 9/6 slot ceiling, vertically adjustable flange may be raised to the top of the slot T-Bar for flush mounting. No visible flange. Optics: Choice of... Standard opal acrylic lens. HTD high performance, high transmission, dichotomous opal polycarbonate lens. 9% transmission. Lengths: All length dimensions are designed at exactly 2 and 4 on-center for use in T-Bar systems. LED: 5yr warranty. >60,000hr LED life. Tested to LM-79 and LM-80. See wattage/lumen table for specifications per foot. All specifications are subject to change. T5/T5HO: Single, dual or triple lamps in cross section. Program start is factory standard. T8: Single, dual or triple lamps in cross section. Instant start is factory standard: choose low <0.8BF; standard 0.8-.0BF; high >.0BF. Specify if program start or custom ballast factor is required. Construction: 22GA steel housing designed to emulate the lines of a T-Bar grid system. Finish: Electrostatically applied powder coat finish. Listing: UL/CUL. Damp Location. Companion Luminaires: H2 recessed Legend:. Standard multi-circuiting: see fixture chart below. Series: Dimension: nominal 2 x 2 2 nominal 2 x 4 4 Lamping: LED standard output LS LED high output LH T5 () S T5HO () H T5 (2) D T5HO (2) O T5 () T T5HO () F T8 () low output T8L T8 () standard output T8S T8 () high output T8H T8 (2) low output T8LD T8 (2) standard output T8SD T8 (2) high output T8HD T8 () low output T8LT T8 () standard output T8ST T8 () high output T8HT LED Temp (if applicable): 000k 0 500k 5 4000k 40 Voltage: universal 20V - 277V U 20V 277V 2 47V Optics: opal acrylic lens OA HTD opal polycarbonate lens HTD Mounting: universal t-bar K Finish: gloss white L Options: dimming - specify manufacturer, model/series and voltage D emergency (fluorescent only) - specify model/series or lumens E external fusing F multi-circuit M new york city code N chicago plenum code C H recessed Multi-circuit standards 2, 4 : elements www.alights.com 20 Version March 204

Platin SD4 Fluorescent. Pendant 62 [2.4] 74 [2.9] CAT #: PREP BY: DATE: PROJECT: TYPE: NOTES: 90 [7.5] ORDERING LOGIC SD4 2 SPECIFICATIONS Optics # of lamps Source Length Up Down Finish Ballast Circuitry Mounting Voltage IC # of Lamps Length Optics Down Ballast Mounting Integrated Control (IC) 2 = 2 Lamps 4 = 4 ft _ = Open Top (leave space empty) E = Electronic Instant Start (T8) PA = Pendant Aircraft Cable _ = None (leave space empty) Source 8 = 8 ft ML = Micro Linear Lens R = Programmed Rapid Start PT = Pendant Aircraft Cable for T-Bar D = Daylight Sensor T8 2 = 2 ft MP = Micro Prismatic Lens D = 0-0V Dimming SS = Solid Stem O = Occupancy Sensor T5 R = Continuous Rows (Consult factory) Finish D2 = DALI T5HO Body A = Anodized aluminum body with Circuitry silver metallic paint finish on metal end caps D = Ribbed = Circuit = 20 V S = Smooth C = Custom Finish on end caps Specify RAL#: LR = Left/Right Switching (2 Lamps) 2 = 277 V Select HANGER LENGTH and HANGER FINISH on p2 Voltage Optics Up EM = Emergency/Night Light = 47 V _ = Open Top (leave space empty) B = Battery 4 = UNV (20-277 V) Due to the Continuous Improvement Policy at Metalumen, we reserve the right to change our specifications without notice. DO = Daylight/Occupancy Sensor Housing: A low profile, rectangular direct/indirect luminaire with a single louver opening at 6mm [6."]. The side profile is offered in a choice of either ribbed or smooth detail and made from extruded aluminum with an anodized matte finish and painted end caps. Optical System: The SD4 provides up to 6% downlight depending on the control option selected. Finish: Anodized aluminum body with silver metallic paint finish on metal end caps is standard. Consult factory for custom colors/finishes. Weight: 2.9 kg/ea [ 6.5 lb/ea ] Mounting: Pendant: Aircraft cable field adjustable is standard with Easy Adjust Quick Connect Cable Grips that are selflocking tamper resistant (contact factory for custom lengths). Solid Stem: Solid stem mm (/2 ) OD. Factory prewired with easy wire quick connect sections. Ballast: Instant Start (T8), Programmed Rapid Start, 0-0V Dimming, DALI Approvals: Certified to NRTL and IES testing standards. culus certified. Environment: Suitable for dry locations. WARRANTY Metalumen will warrant a one year parts and labour warranty. Warranty is valid if luminaire is installed and used according to specification. The Ballast will carry a standard 5 year warranty by the manufacturer. If defective, Metalumen will send replacement ballasts or drivers at no cost along with detailed replacement instructions and instructions on how to return defective components to Metalumen. MOUNTING INFORMATION Nominal Overall mm [in] Centers mm [in] Length T8 T5 T8 T5 4 294 [50.9] 24 [48.9] 270 [50.0] 29 [48.0] 8 255 [99.8] 24 [95.8] 252 [98.9] 240 [94.9] 2 777 [48.7] 62 [42.6] 754 [47.8] 600 [4.7] Overall Centers Mounting dimensions indicated are for individual units only. For continuous row mounting dimensions consult factory. FILE NAME: Platin SD4_SPEC_SHEET 02065 APPROVALS: Signature Date 570 Southgate Drive, Guelph, Ontario NG 4P6 Mailing Address: P.O. Box 779 Guelph, Ontario, NH 6Z9.800.62.6785 T 59.822.48 F 59.822.4589 www.metalumen.com SPECIFICATION SHEET PAGE

Platin SD4 Fluorescent. Pendant BODY HANGER Ribbed Solid Select Hanger Length and Finish: SOLID STEM /2" OD STANDARD Standard supplied length is 8 (460mm). Hangers will be supplied at closest length. All other lengths are considered custom unless otherwise stated. AIRCRAFT CABLE Total adjustment range is 6 up & down for each standard length. All other lengths are considered custom unless otherwise stated. FEATURES COMMERCIAL // Commercial Lighting - With over 0 years of successful architectural lighting, providing unique concept and installation solutions has become second nature. Metalumen s Start to End Development Process results in unique performance, design and architectural requirements from concept through implementation. Metalumen s Lighting Solutions have been applied to customer projects requiring: high profile architectural installations; improved energy efficiency; retrofit installations; unique installations. Metalumen can provide top-quality innovative fixtures when and where they are needed and, at the same time, allow the customer to determine their level of involvement in Metalumen s Start to End Development Process. HANGER FINISH White Paint (Standard) Custom Specify RAL#: IMPERIAL (in) METRIC (mm) 2 05 5 80 8 460 2 5 24 60 27 685 0 760 840 6 95 9 990 42 067 45 45 48 220 Custom length: IMPERIAL (in) METRIC (mm) 2 05 8 460 24 60 0 760 6 95 42 067 48 220 54 72 60 525 72 80 96 2440 20 050 44 660 Custom length: MOUNTING - ROW CONFIGURATION Qty 4ft 8ft 2ft nominal run length x 4 x 8 x 2 Overall Length 294 [50.9] 255 [99.8] 777 [48.7] 252 [98.9] 270 [50.0] 754 [47.8] Individual Sections Distance between mounting points T8 2x 6 x x 20 2x 24 2x x 28 x 2x 2 x 6 2x 2x 40 x x 44 4x 48 5048 [98.7] 6289 [247.6] 750 [296.5] 8802 [46.5] 0042 [95.4] 284 [444.] 2554 [494.] 797 [54.2] 508 [592.0] 252 [98.9] 252 [98.9] 754 [47.8] 252 [98.9] 754 [47.8] 754 [47.8] 252 [98.9] 754 [47.8] 252 [98.9] 754 [47.8] 252 [98.9] 754 [47.8] 754 [47.8] 754 [47.8] 754 [47.8] 754 [47.8] 252 [98.9] 252 [98.9] 754 [47.8] Continuous Rows 754 [47.8] 754 [47.8] 754 [47.8] 252 [98.9] 754 [47.8] 754 [47.8] 754 [47.8] 754 [47.8] FILE NAME: Platin SD4_SPEC_SHEET 02065 570 Southgate Drive, Guelph, Ontario NG 4P6 Mailing Address: P.O. Box 779 Guelph, Ontario, NH 6Z9.800.62.6785 T 59.822.48 F 59.822.4589 www.metalumen.com SPECIFICATION SHEET PAGE 2

Platin SD4 Fluorescent. Pendant MOUNTING - ROW CONFIGURATION Qty 4ft 8ft 2ft nominal run length x 4 x 8 x 2 Overall Length 24 [48.9] 24 [95.8] 62 [42.6] 240 [94.9] 29 [48.0] 600 [4.7] Individual Sections Distance between mounting points T5 / T5HO 2x 6 x x 20 2x 24 2x x 28 x 2x 2 x 6 2x 2x 40 x x 44 4x 48 4844 [90.7] 604 [27.6] 7224 [284.4] 8444 [2.4] 964 [79.] 0824 [426.] 2044 [474.2] 24 [52.0] 4424 [567.9] 240 [94.9] 240 [94.9] 600 [4.7] 240 [94.9] 600 [4.7] 600 [4.7] 240 [94.9] 600 [4.7] 240 [94.9] 600 [4.7] 240 [94.9] 600 [4.7] 600 [4.7] 600 [4.7] 600 [4.7] 600 [4.7] 240 [94.9] 240 [94.9] 600 [4.7] Continuous Rows 600 [4.7] 600 [4.7] 600 [4.7] 240 [94.9] 600 [4.7] 600 [4.7] 600 [4.7] 600 [4.7] PHOTOMETRIC DATA 2 T8 LAMPS File Name: SD4-2T8-4 Luminaire Lumens: 487 Input Watts: 78 Efficiency: 84 % Efficacy: 62 lms/w Optics Up: Open Top Optics Down: Open Bottom PHOTOMETRIC CURVE CANDLE DISTRIBUTION Vertical Angle Horizontal Angle COEFFICIENTS OF UTILIZATION Zonal Cavity Method Effective Floor Cavity Reflectance =.20 LUMINANCE DATA (CD/M 2 ) Vertical Angle Horizontal Angle 0 45 90 45 495 498 502 55 40 48 546 65 4047 4927 554 75 86 5680 7029 85 05 4089 027 FILE NAME: Platin SD4_SPEC_SHEET 02065 570 Southgate Drive, Guelph, Ontario NG 4P6 Mailing Address: P.O. Box 779 Guelph, Ontario, NH 6Z9.800.62.6785 T 59.822.48 F 59.822.4589 www.metalumen.com SPECIFICATION SHEET PAGE

Platin SD4 Fluorescent. Pendant PHOTOMETRIC DATA 2 T5 LAMPS File Name: SD4-2T5-4-MP Luminaire Lumens: 4297 Input Watts: 66 Efficiency: 82 % Efficacy: 65 lms/w Optics Up: None Optics Down: Micro Prismatic lens PHOTOMETRIC CURVE CANDLE DISTRIBUTION Vertical Angle Horizontal Angle COEFFICIENTS OF UTILIZATION Zonal Cavity Method Effective Floor Cavity Reflectance =.20 LUMINANCE DATA (CD/M 2 ) Vertical Angle Horizontal Angle 0 45 90 45 246 059 57 55 245 795 70 65 294 97 00 75 528 94 452 85 20 248 FILE NAME: Platin SD4_SPEC_SHEET 02065 570 Southgate Drive, Guelph, Ontario NG 4P6 Mailing Address: P.O. Box 779 Guelph, Ontario, NH 6Z9.800.62.6785 T 59.822.48 F 59.822.4589 www.metalumen.com SPECIFICATION SHEET PAGE 4

Stail RMEP LED. Pendant RMEP6 [.] 2009 AWARD GOLD CAT #: PREP BY: DATE: PROJECT: TYPE: NOTES: 5 [6.0] RMEP8 [.] 204 [8.0] Model Shown : RMEP8 ORDERING LOGIC Model Optics RMEP 8 2L5K R M SG PA 20 O Series Width Color Temp Length Up Down Finish LL/Driver Circuitry Mounting Voltage IC Width Length Optics - Down Light Level (LL) / Driver Circuitry Voltage 6 = 6 inches 4 = 4 ft M = Meta Ice Fixture Lumens = Circuit = 20 V 8 = 8 inches 8 = 8 ft *Light level measured at 500K. Add % lumen output for 4000K or EM = Light Emergency/Night 2 = 277 V subtract 2% lumen output for 000K. R = Continuous Rows See p.2 B = Battery Pack 4 = UNV (20-277V) Color Temp Finish 0-0V Dimming 500K 2L0K = 000K Optics Up SG = Silver/grey textured coat (Standard) RMEP6 RMEP8 Mounting Integrated Control (IC) L = 064 76 2L5K = 500K _ = None - Open Top C = Custom Finish (leave space empty) PA = Pendant Aircraft Specify RAL#: L2 = 904 4047 Cable _ = None (leave space empty) L = 5596 580 2L40K = 4000K ODC = Opal Dust Cover 20% up/80% down PT = Pendant Aircraft L4 = 0727 20 Cable for T-Bar D = Daylight Sensor Select CABLE LENGTH and C = Clear Dust Cover Based on 4ft sections. HANGER FINISH on p.2 O = Occupancy Sensor DO = Daylight/Occupancy Sensor SPECIFICATIONS Due to the Continuous Improvement Policy at Metalumen, we reserve the right to change our specifications without notice. Housing: Cold rolled steel body fabrication, 0.9mm (20 Ga.) wall thickness. Optical System: MetaLED mid flux LED technology. CRI: Minimum 8 CRI at 500K Lumen Maintenance: At an ambient operating temperature of 25 C the LED lifetime expectancy => 50 000 hrs at L70. Finish: Silver/grey textured powder-coat paint. For custom finish, consult factory. Mounting: Pendant: Aircraft cable with Quick-Grip field adjustable suspension system provides for quick and easy onsite alignment. Electrical: Factory prewired with easy wire quick connect sections. Drivers: Metalumen offers dimming drivers as a standard on our entire LED product offering at 0-0V. Dimming is 0%-00% range Power factor is >90% with a Class 2 rating. Integrated Controls: Refer to Ordering Logic chart above. Approvals: Certified to NRTL and IES testing standards. All components are UL and CUL listed. RoHS compliant. Environment: Suitable for dry locations. WARRANTY Metalumen will warrant defective luminaires for 5 years from date of purchase. Warranty is valid if luminaire is installed and used according to specification. If defective, Metalumen will send replacement boards or drivers at no cost along with detailed replacement instructions and instructions on how to return defective components to Metalumen. LUMINAIRE WATTAGE AND OUTPUT SPECIFICATION Light Level Wattage Lumens Delivered Efficacy (LPW) RMEP6 RMEP8 RMEP6 RMEP8 RMEP6 RMEP8 L 27. 27. 064 76 2 6 L2 4.8 4.8 904 4047 2 6 L 47.7 47.7 5596 580 7 2 L4 95.5 95.5 0727 20 2 6 APPROVALS Signature Date FILE NAME: Stail_RMEP_LED_SPEC_SHEET 0205 570 Southgate Drive, Guelph, Ontario NG 4P6 Mailing Address: P.O. Box 779 Guelph, Ontario, NH 6Z9.800.62.6785 T 59.822.48 F 59.822.4589 www.metalumen.com SPECIFICATION SHEET PAGE

Stail RMEP LED. Pendant FEATURES COMMERCIAL // Commercial Lighting - With over 0 years of successful architectural lighting, providing unique concept and installation solutions has become second nature. Metalumen s Start to End Development Process results in unique performance, design and architectural requirements from concept through implementation. Metalumen s Lighting Solutions have been applied to customer projects requiring: high profile architectural installations; improved energy efficiency; retrofit installations; unique installations. Metalumen can provide top-quality innovative fixtures when and where they are needed and, at the same time, allow the customer to determine their level of involvement in Metalumen s Start to End Development Process. EDULUMEN // Educational Lighting Edulumen is a collection of premium luminaires that maximize both the functionality and performance of any educational facility. Based on maximum efficiency, integration of controls and exceptional design, Edulumen will earn high marks for meeting your requirements. Students challenge themselves throughout the day to achieve, and Metalumen is dedicated to this by creating sustainable environments that foster enhanced educational experiences META ICE is a smooth Continuum Optical System with a 9% transmission rate that creates smooth subdued lighting with no source imagery. Meta Ice is a premium lensing optic unique to Metalumen but coupled with a high performance side kicking specular reflector to maximize the lumens from the source creating an unparalleled lumen delivery. LED boards with a raw efficacy of over 20lm/W, proprietary to Metalumen. A slim LED platform for any of your LED linear application. HANGER Select Hanger Length and Hanger Finish: HANGER FINISH White Paint (Standard) Custom Specify RAL#: AIRCRAFT CABLE Total adjustment range is 6 up & down for each standard length. All other lengths are considered custom unless otherwise stated. IMPERIAL (in) METRIC (mm) 2 05 8 460 24 60 0 760 6 95 42 067 48 220 54 72 60 525 72 80 96 2440 20 050 44 660 Custom length: MOUNTING - ROW CONFIGURATION - 8 ft sections QTY 8ft nominal run length x 8 Actual Length 2480.0 [97.6] 2457 [96.7] Individual Sections LEGEND Distance between mounting points 2x 6 4959.0 [95.2] 2457 [96.7] 2480 [97.6] This chart is not to scale. x 24 4x 2 5x 40 6x 48 749.0 [292.9] 998.0 [90.5] 298.0 [488.] 4878.0 [585.7] 2457 [96.7] 2480 [97.6] 2480 [97.6] 2457 [96.7] 2480 [97.6] 2480 [97.6] 2480 [97.6] 2457 [96.7] 2480 [97.6] 2480 [97.6] 2480 [97.6] 2480 [97.6] Sections in a continuous row 2457 [96.7] 2480 [97.6] 2480 [97.6] 2480 [97.6] 2480 [97.6] 2480 [97.6] For more configurations, consult factory. FILE NAME: Stail_RMEP_LED_SPEC_SHEET 0205 570 Southgate Drive, Guelph, Ontario NG 4P6 Mailing Address: P.O. Box 779 Guelph, Ontario, NH 6Z9.800.62.6785 T 59.822.48 F 59.822.4589 www.metalumen.com SPECIFICATION SHEET PAGE 2

Stail RMEP LED. Pendant PHOTOMETRIC DATA - 500K RMEP6 L File Name: RMEP6-2L5K-4-M-L Luminaire Lumens: 5596 Total Watts: 47.8 Efficacy: 7 lms/w Optics Up: Open Top Optics Down: Meta Ice COEFFICIENTS OF UTILIZATION Zonal Cavity Method Effective Floor Cavity Reflectance =.20 PHOTOMETRIC CURVE LUMINANCE DATA (CD/M 2 ) Vertical Angle Horizontal Angle 0 45 90 45 845 254 090 55 84 2407 2746 65 784 989 287 75 46 294 295 85 829 449 98 CANDLE DISTRIBUTION Vertical Angle Horizontal Angle 0 22.5 45 67.5 90 0 258.05 258.05 258.05 258.05 258.05 5 26.84 252.2 27.59 285.0 29.5 0 27.7 269.49 28.6 00.9 04.77 5 266.84 275.6.78 4.84 56. 20 268.47 285.49 9.4 90.8 40.06 25 269.7 02.7 77.84 46.2 458.04 0 27.6 07.85 40.78 469.2 497.5 5 280.26 22.46 45.54 496.0 529.79 40 262.99 4.47 48.4 502.95 52.6 45 254.22 04.2 404.6 482.94 5.2 50 26.4 28.5 80. 440.6 46.5 55 208.5 256.42.8 88.5 98.49 60 88. 222.04 285.9 22.8 4.6 65 5.7 77 222.96 256.04 26.7 70 6.78 4.95 66.25 8.68 88.2 75 76.92 92.2 07.64 9.07 9.22 80 46.9 52.5 6.27 64.6 67.7 85 8.22 20.94 2.2 2.44 24.26 90.76 2.4 2.8 2.05 2.58 95 48.75 80.22 45.47 44.44 55. 00 27.99 256.84 88.6 56.9 4.9 05 20.9 96.7 60.02 776.4 84.28 0 264.46 54.2 747.9 959.59 060.62 5 24.9 60.67 87.56 072.92 64.4 20 75.69 65.5 955.59 9.29 229.88 25 4.62 680.54 992.4 95.45 278.46 0 46.85 68.9 997.5 77.8 250. 5 456.7 68.7 987.86 45.27 22.84 40 458.75 682.89 940.7 0.48 60.7 45 474.7 649.69 88.76 057.02 7.25 50 467.45 6.68 80.86 959.26 02.6 55 462.95 592.64 757.4 87.42 95.0 60 455.07 556.67 702.47 78.5 805.6 65 468.92 5.5 62.4 697.44 725.2 70 448.2 490.94 545.98 588. 600.8 75 45.84 45.29 48.0 496.48 55.54 80 429.87 429.87 429.87 429.87 429.87 RMEP8 L File Name: RMEP8-2L5K-4-M-L Luminaire Lumens: 580 Total Watts: 47.8 Efficacy: 2 lms/w Optics Up: Open Top Optics Down: Meta Ice COEFFICIENTS OF UTILIZATION Zonal Cavity Method Effective Floor Cavity Reflectance =.20 PHOTOMETRIC CURVE LUMINANCE DATA (CD/M 2 ) Vertical Angle Horizontal Angle 0 45 90 45 77 589 905 55 25 554 828 65 26 62 52 75 970 952 987 85 57 68 70 CANDLE DISTRIBUTION Vertical Angle Horizontal Angle 0 22.5 45 67.5 90 0 246.74 246.74 246.74 246.74 246.74 5 26.0 242.66 27.58 25.48 28.07 0 244.05 244.8 258.58 26.54 267.4 5 242.64 242.09 275.7 294.62 00.69 20 242.9 25.45 288.8 7.8 29.46 25 245.96 257.8 0.48 48.79 67.04 0 28.94 264.22 2.95 78.4 97.6 5 240.27 268.06.7 84.6 4.42 40 227.22 262.27.89 90.89 422.05 45 26.9 25.75 26.6 84. 40.9 50 205.92 242.27 02.6 50.57 69.82 55 86.78 24.25 27. 6.75.2 60 56.8 79.5 229.42 268.96 280.4 65 28.2 5.8 9.8 26.4 225.25 70 00.85 40.7 58.64 68.89 75 70.56 78.87 96.72 06.59 07.96 80 4.5 46.07 55.08 6.4 62.6 85 5.27 9.69 2.85 24.5 24.87 90 4.5.74.94 4.05 4.8 95 5.0 79.65 82.8 75. 69.8 00 6.5 255.6 265.6 09.7 9.87 05 24. 44.42 56.6 5.48 504.79 0 4.02 5.78 767.9 892.78 96.69 5 49.6 620.6 880.05 070.02 2.4 20 49.0 688.2 955.48 46.7 225.5 25 557.08 764.02 989.57 79.2 20.84 0 605.24 89 0.6 79.0 245.69 5 656.9 85.6 049.4 64.22 29.62 40 686.2 89.7 077.27 55.69 20.85 45 79.9 892.98 22.67 68.6 208.58 50 769.44 92.2 20.48 2 97.87 55 79.4 99.42 0.84 98.67 227.5 60 79.44 90.46 047.79 70.96 78.2 65 86.62 90.7 05.76 088.02 42. 70 87.47 876.5 952.08 006.2 004.42 75 855.65 849.44 875.05 909.5 897.4 80 852.5 852.5 852.5 852.5 852.5 FILE NAME: Stail_RMEP_LED_SPEC_SHEET 0205 570 Southgate Drive, Guelph, Ontario NG 4P6 Mailing Address: P.O. Box 779 Guelph, Ontario, NH 6Z9.800.62.6785 T 59.822.48 F 59.822.4589 www.metalumen.com SPECIFICATION SHEET PAGE

GENERAL NOTES V D- B L L H A-5 A-4 A-2 A-4 A-5 H A- A- A- V V M C V D B L S L V A-5 A- A-5 V V V V V O V 04 CONFERENCE ROOM V V V V Z- Z- G G 07 DIRECTOR'S OFFICE I G H A- V A- A-5 H H A- H H A-5 A- A-5 V A-4 A-4 A-5 A-2 A- A- H H H H MCE MCE MCE MCE H H V V MCE MCE V H SPECIFIC NOTES V A- A- T A- 06 K K K K STAFF WORK AREA L L L E Y CLOSET T Y 06 RECEPTION DESK L 0 FILM STORAGE ROOM 05 SECURE FILE ROOM Y V B A N I Z Y? B COPY/PRINTING ROOM Z-4 0 QUIET ROOM L 2 KITCHEN L T L ENGINEERING PROGRAM MANAGEMENT CONSTRUCTION MANAGEMENT 55 PICCARD DRIVE, SUITE 260 ROCKVILLE, MARYLAND 20850 (T) 0-26-287 (F) 0-26-967 www.theges.com 0 Z-2 02 FILM ROOM ENTRANCE LOBBY A- L L 08 STORAGE ROOM 5 CLOSET 2 DW REF. MAIN ENTRANCE ELECTRICAL FLOOR PLAN POWER SCALE: /4"='-0" KEY PLAN SCALE: /2"='-0" 2 ELECTRICAL ROOF PLAN POWER SCALE: /4"='-0"

Surface Raceway and Lighting Support Systems B-900 G-962 Channel raceway system supports and feeds fluorescent lighting fixtures. Surface Raceway and Lighting Support Systems The Kindorf Lighting Support System consists of high quality construction materials that afford definite installation advantages to those most concerned with lighting installations. When used as a Surface Metal Raceway it is U.L. Listed and complies with National Electrical Code Article 52. To The Owner A flexible installation requiring fewer attachments to the building structure with built-in provisions for easy maintenance and future modifications when lighting fixtures must be added, deleted or relocated. Kindorf channel and fittings form a strong, economical and attractive support and wiring system for fixtures and other equipment. To The Architect and Engineer A system of construction least demanding on general design conditions and readily adaptable to all spacing of pillars, purlins and other structural components. Supply will not delay a job because Kindorf is stocked at many locations throughout the country. The Kindorf System saves planning time because it is designed for fast and easy installation by the contractor with little or no detailing. To the Contractor The Kindorf System consists of time saving materials that will simultaneously provide for the electrical feed and the mechanical support of lighting and other equipment. Kindorf affords a means of making fewer attachments to the structure at wider spacing. It insures true and rigid alignment and lends itself to systematic preassembly methods which economize on labor. No special tools for installation and no painting is required. Kindorf speeds all jobs because a complete line of fittings assures easy solution of many installation problems as they arise in the field. K Kindorf 200 Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com K7

Surface Raceway and Lighting Support Systems Surface Raceway Channel Systems Knock-out type by means of 2" channel knockouts on 6" centers 2 x 2 x 4 ga. 2 x 2 x 4 ga. G-975-M 2 x 2 x 2 ga. 2 x 2 x 2 ga. G-975 2 x 7 8 x 2 ga. 7 2 x 8 x 2 ga. G-965 2 x x 2 ga. 2 x x 2 ga. Plug-in type by means of sliding fixture hanger 2 x 2 x 4 ga. 2 x 2 x 4 ga. B-900-M 2 x 2 x 2 ga. 2 x 2 x 4 ga. B-900 2 x 7 8 x 2 ga. 2 x 2 x 4 ga. B-90 2 x 4 x 4 ga. 2 x 2 x 4 ga. B-906 Electrical Conductors Lay-In the Channel Kindorf Surface Raceway channels provide a central wiring distribution system with conductor capacity that exceeds requirements of any lighting layout and with power to spare for other uses. Channel adapts to any interval of structural support may be dropped to any level where it becomes a rigid platform for fixture attachment. Lighting fixtures may be spaced and fastened anywhere along the channel system with plug-in or direct feed electrical connection. Branch lighting circuit conductors are completely enclosed in channel from panel to fixture eliminating the ordinary clutter of external conductors and protecting the wires from physical damage. Listed by Underwriters Laboratories, Inc. G-955 K Kindorf G-972-/2 Nipple Lock nut and bushing G 974 G-974--/4 G-02 Hanger with H-5-A bolt and square nut plus G-06 and H-8-C washers G-02 hangar with H-5-A bolt and sq G-06 and H-8- K72 200 Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com

Surface Raceway and Lighting Support Systems Channel Support Lighting Systems Shoulder bolt type Spring-nut type by means of special shoulder bolt by means of spring-nut and bolt combination 2" x " slots on 4" centers 2 x 2 x 2 ga. 2 x 2 x 2 ga. 2 x 4 x 4 ga. 2 x 4 x 4 ga. B-906 G-95 2 x 2 x 4 ga. 2 x 2 x 4 ga. 2 2x x 2 2 x 4 2 ga. ga. G-956 B-900-M 2 x 2 x 2 ga. 2 x 2 x 2 ga. B-900 Kindorf channels, installed slot-side down, are designed to provide fixture support only. A range of accessory fittings permit fixture attachment to the channel safely and securely in an approved manner. Channels with solid base or with slots are generally used for simple channel support systems. Channel support systems combine economy of investment with maximum strength and rigidity. The continuousslot channel provides complete flexibility of lighting layout with fixture spacing continuous or intermittent. Fixtures may be added or relocated to meet changing requirements without disturbing the basic support system. The rigid channels maintain fixture alignment, adapt to any interval of structural support. 2 x 7 8 x 2 ga. 2 x 7 8 x 2 ga. G-97-2- 4 B-90 2 x x 2 ga. 2 x x 2 ga. B-902 K Kindorf B-9-4 4 -B H--B 200 Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com K7

Surface Raceway and Lighting Support Systems Other mechanical details G-02 G-967 G-975 G-975 G-967 G-969A G-969 G-02 G-02 For mounting or suspending high intensity lighting fixtures in high bay installations. G-969A or G-969AP Closure Strip G-975 G-972-2 Nipple G-020 G-02 G-969A G-08 G-972-HB- 2 & 4 Fixture Hanger Adapter Fixture Hanger Fixture Box and Fixture K B-900 G-962 G-962 Kindorf Maximum Number of Wires in Raceway See page K8 and K9 for maximum number of wires in raceway. K74 200 Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com

Surface Raceway and Lighting Support Systems G-950 Fixture Hanging Channel Cat. No. Description Joiner G-950 d" x g" x 2 ga. G-978C L" x 2b" slots on 4 foot centers 20 ft. lengths only 94#/C ft. Standard finish: Galv-Krōm 7 8 2 8 4 ft. 2 4 4 ft. 8 G-95 Fixture Hanging Channel Cat. No. Description Joiner G-95 d" x d" x 2 ga. G-958 Fixtures attached to channel of G-97-2- 4 shoulder bolts. 54#/C ft. u" x " slots on 4" centers Standard finish: Galv-Krōm K 2 Kindorf 2 2 2 200 Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com K75

Surface Raceway and Lighting Support Systems To be used in place of G-975 channel when heavy fixtures are used or supports are on wider spacing. G-955 Fixture Hanging Channel Cat. No. Description Joiner End Cap G-955 d" x " x 2 ga. G-978-D G-957 G-959 270#/C ft. UL Listed for raceway. d" KO s on 6" centers Standard finish: Galv-Krōm 2 2 KO 6 K Kindorf Similar to G-95 channel except it is lighter gauge and only 4" deep. G-956 Fixture Hanging Channel Cat. No. Description Joiner G-956 d" x f" x 4 ga. G-960 Fixtures attached to channel by means of G-97--/2 shoulder bolts or G-97-2- 4 fixture bolts. 80#/C ft. u" x " slots on 4" centers Standard finish: Galv-Krōm 2 2 4 4 2 2 2 2 K76 200 Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com

Surface Raceway and Lighting Support Systems Blank end cap for use with G-955 and B-902 channel. G-957 End Cap Cat. No. Wt. lbs./c G-957 4 4 ga. steel. U.L. Listed for raceway. Galv-Krōm finish 8 8 5 6 For 2" deep slotted channel G-95. G-958 Channel Joiner Cat. No. Wt. lbs./c G-958 92 Four c" x f" bolts and nuts are furnished with the joiner. 4 ga. steel. Galv-Krōm finish K Bolts and Nuts 7 6 Kindorf 9 6 2 2 8 2 200 Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com K77

Surface Raceway and Lighting Support Systems For use with G-955 and B-902 channel. G-959 End Cap With Two d inch Knockouts Cat. No. Wt. lbs./c G-959 2 ga. steel. U.L. Listed for raceway. Galv-Krōm finish 8 stud 8 nut nut G-974 G-974 - - 2 2 8 8 5 5 552 52 6 6 2 KO 2 K Kindorf For 4" deep slotted channel G-956. G-960 Channel Joiner Cat. No. Bolts and Nuts Wt. lbs./c G-960 70 Four c" x f" bolts and nuts are furnished with the joiner. 4 ga. steel. Galv-Krōm finish 4 9 6 2 2 8 2 K78 200 Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com

Surface Raceway and Lighting Support Systems G-962 and G-962-D Channel Hangers Cat. Wt. Cat. Wt. Dim. A No. lbs./c No. lbs./c Hanger Size (in.) (in.) G-962-40 G-962-D- 47 b and c rod 2 G-962-2 42 G-962-D-2 47 d rod and b pipe 9 6 G-962-9 G-962-D- 47 c pipe and e rod 6 G-962-4* 47 G-962-D-4** 47 d pipe 7 8 G-962 fits around 2" or 7 8" deep channel. G-962-D series hangers for " deep channel. * Load rating of 600 lbs. with a safety factor of three. ** Load rating of 700 lbs. with a safety factor of three. B dimension for G-962:2 2"; for G-962-D:4". U.L. Listed for raceway. C dimension for G-962, F", for G-962-D, ƒ". Galv-Krōm finish A 4 4 6 6 Ga C B 5 6 6 2 2 G-96 Channel Hanger Cat. No. Hanger Size (in.) Dim. A (in.) G-96- b and c rod 2 G-96-2 d rod and b pipe 9 6 Load rating of 900 lbs. with a safety factor of three. 48#/C. Galv-Krōm finish K Kindorf For use with G-95 or G-956 channel. Does not interfere with fluorescent fixtures. 2 Ga A 7 7 64 6 6 2 2 8 8 2 2 x x 6 8 8-6 200 Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com K79

Surface Raceway and Lighting Support Systems Provides a combination fixture support and surface raceway. 2 G-965 Fixture Hanging Channel d" x g" Cat. No. Description Joiner End Cap G-965 2 ga., 90#/C ft. G-978-C 6959 U.L. Listed for raceway. d" knockouts on 6" centers Standard finish: Galv-Krōm 7 8 2 KO 2 6 K For 7 8" deep channel. G-966 Blank End Cap Cat. No. Wt. lbs./c G-966 8 U.L. Listed for raceway. Galv-Krōm finish Kindorf 57 64 8 5 6 K80 200 Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com

Surface Raceway and Lighting Support Systems G-967 Blank End Cap Cat. No. Wt. lbs./c G-967 6 U.L. Listed for raceway. Galv-Krōm finish For use with 2" deep channel. G-968 Blank End Cap Cat. No. Wt. lbs./c G-968 U.L. Listed for raceway. Galv-Krōm finish K For 4" deep channel. Kindorf 200 Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com K8

Surface Raceway and Lighting Support Systems G-969A Closure Strip for New Style Kindorf Channel Cat. No. Description G-969A Steel Closure Strip Galv-Krōm finish G-969AP Plastic Closure Strip Gold 9 ga. steel. 5#/C. U.L. Listed for raceway. For use with all channel series to complete enclosure. 7 2 2 G-969A G-969AP K Kindorf The 2" size can nipple fixtures through channel knockouts. All sizes can be fastened to the open slot of all Kindorf channels. Locknut supplied with nipple. G-972 Nipple Malleable Iron Cat. No. A B C Wt. in lbs./c G-972-/2 d" Pipe Size g" b" 7 G-972-/4 f" Pipe Size g" b" G-972-L-/2 d" Pipe Size 2" b" 9 The extra length of the G-972-L-/2 permits its use as a spacing nipple when locked into knockout or continuous slot. Load rating 750#, with a safety factor of. Galv-Krōm finish A B C K82 200 Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com

Surface Raceway and Lighting Support Systems G-972-HB-/2 Steel Fixture Hanger Adapter Cat. No. Wt. lbs./c G-972-HB-/2 Galv-Krōm finish 7 G-975 G-969 or G-969P Closure Strip The Fixture Hanger Adapter extends the flexibility of the Kindorf System by easily adapting the 4" hanger size of high intensity fixtures to channel mounting. The hanger adapter securely mounts the fixture hanger or box to the channel through the 2" KO in the base. No special tools are needed for installation of fittings and fixtures. Kindorf channels, with 2" KO s every 6", hangs and feeds the fixtures thus simplifying installation. Fixture Hanger G-972-2 Nipple G-972-HB- 2 & 4 Fixture Hanger Adapter Fixture Box and Fixture G-97 Shoulder Type Fixture Bolt and Nut Used with Cat. No. Channel Size Wt. lbs./c G-97--/2 G-956 c x d 7 G-97-2-/4 G-95 c x 2b 0 Galv-Krōm finish K Kindorf For use in fastening fixtures to slotted channels. Permits the preassembly of hardware to the fixture. The head of the G-97 is simply inserted into the channel slot and twisted 90 to seat. The fixture is secured tightly when the nut is run home. 200 Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com K8

Surface Raceway and Lighting Support Systems Will fasten fluorescent fixtures to G-975 thru knockouts or to the open slot of all Kindorf channels when installed slot down. G-974 Fastener Cat. No. Size Wt. lbs./c G-974-/2 b x d 8 G-974-/4 b x f 8d G-974- b x 9 G-974--/4 b x b 0 G-974--/2 b x d Galv-Krōm finish K Kindorf Designed to provide a combination fixture support and surface raceway. Fixture attaches to KO s by G-972-2 nipple for wiring, or a G-974 stud nut where wiring is not required. G-975 Fixture Hanging Channel d" x d" Cat. No. Description Joiner End Cap G-975 2 ga. G978A G967 G-975-M 4 ga. G50-S G979 G-975: 60#/C ft. G-975-M: 07#/C ft. U.L. Listed for raceway. d" knockout s on 6" centers Standard finish: Galv-Krōm 2 2 2 2 KO 6 K84 200 Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com

Surface Raceway and Lighting Support Systems G-976 Connector Cat. No. Wt. lbs./c G-976 Galv-Krōm finish 54 Load rating 000# with a safety factor of. U.L. Listed for raceway. Accepts either 2" or 4" conduit to feed control channel when used as a combination raceway and lighting fixture support. Includes two stud nuts. Malleable iron. 4 2 2 6 4 conduit thd. in main unit 4 conduit thd. in main unit G-977 Swing Connector Channel feed hanger Cat. No. Wt. lbs./c G-977 Galv-Krōm finish 0 Includes two stud nuts. Malleable iron. U.L. Listed for raceway. Load rating of 00 lbs. with a safety factor of three. K 5 2 2 Kindorf Provides a 5 swing in either direction to the channel run. Accepts 2" or 4" conduit, or may be adapted for use with 8" fixture stem when specified. 4 conduit conduit thd. main 4thd. in main unit 2 5 5 2 2 200 Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com K85

Surface Raceway and Lighting Support Systems To splice lengths of raceway channel. Installed by tightening nuts on 4" studs which are permanently attached to a smooth inner plate. G-978 Joiners Dim. A Wt. Cat. No. Type of Channel Applicable (in.) lbs./c G-978 Use with G-975, G-975-M and d 07 B-900, B-900-M G-978-L Use with B-906 f 87 G-978-D Use with G-955 and B-902 7 G-978-C Use with B-90, G-950 and G-965 g 22 Nuts included. 4 ga. steel. U.L. Listed for raceway. Galv-Krōm finish 2 2 7 2 7 2 2 2 4 4 A K Kindorf For installations where fixtures are mounted flush to slot-down channels. Fastening is accomplished by tightening flat head machine screws. G-978-A Joiners Dim. A Wt. Cat. No. Type of Channel Applicable (in.) lbs./c G-978-A Use with G-975, G-975-M and B-900, B-900-M d 0 G-978-AL Use with B-906 f 8 4 ga. steel. Galv-Krōm finish 2 7 2 2 4 A K86 200 Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com

Surface Raceway and Lighting Support Systems Use with G-975 or B-900 channel to provide conduit entrance. G-979 End Cap Cat. No. Description Wt. lbs./c G-979-/2 For g" hole, d" conduit 25 G-979-/4 For p" hole, f" conduit 25 Furnished with stud nut. 2 ga. steel. U.L. Listed for raceway. Galv-Krōm finish 5 5 8 8 2 2 7 7 8 8 Mounts 2" x 2" raceway channel to panel board. G-007 Panel Adapter Cat. No. 7 8 8 Wt. lbs./c G-007 6 Complete with stud nuts. U.L. Listed for raceway. Galv-Krōm finish 2 6 6 4 K 7 8 8 8 8 6 6 9 9 6 6 Kindorf 4 4 G-02 Lay-In Channel Hanger Cat. No. Wt. lbs./c G-02 Galv-Krōm finish 4 ga. steel. U.L. Listed for raceway. Load rating of 500 lbs. with a safety factor of three. 9 2 2 6 hole total - 6 dia. hole total - 2 2 4 4 Hinged channel hanger for raceway channel. 9 long x wide slot 2 8 5 5 64 dia. hole total - 2 5 64 64 9 2 long x 8 wide slot 2 dia. hole total - 8 8 5 8 8 200 Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com K87

Surface Raceway and Lighting Support Systems G-02-D Lay-In Channel Hanger Cat. No. Wt. lbs./c G-02-D Galv-Krōm finish 40 4 ga. steel. U.L. Listed for raceway. Load rating of 450 lbs. with a safety factor of three. 9 2 2 hole total - 6 6 dia. hole total - 2 2 4 4 Hinged channel hanger for " deep raceway channel. 9 long x wide slot 2 8 5 5 64 dia. hole total - 2 5 64 64 9 2 long x 8 wide slot 2 dia. hole total - 4 6 5 5 8 8 K Kindorf Two required for each G-02 channel hanger to provide swivel action. Use with G-02 fixture hanger as cushion between fixture and hanger. G-0 Hex Swivel Nuts Wt. Cat. No. Description lbs./c G-0-/8 For c" hanger rod 7 G-0-/2 For d" hanger rod 7 G-06 Rubber Washer Cat. No. Wt. lbs./c G-06 Washers are " diameter, b" thick with j" hole. G-07 Mercury Vapor Hanger Cat. Used with Depth Wt. No. Channel Size lbs./c B-900, B-90 G-07 G-975 4 4" 76 G-965 Galv-Krōm finish 2 2 To support high or low bay mercury vapor or heavy incandescent fixtures from raceway channels. Permits plug-in connections with G- 08 raceway outlets. 6 4 4 8 dia. hole C 2 K88 200 Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com

Surface Raceway and Lighting Support Systems G-020 End Swivel Joint Cat. No. Wt. lbs./c G-020 Galv-Krōm finish 40 U.L. Listed for raceway. Mounts to 2" x 2" raceway channel. Threaded for 4" conduit or fitting. Swivel action, adapter for 2" conduit furnished. 4-4 N P S Thread with 4 to 2 Reducer 5 2 6 8 G-02 Threaded End Fitting Cat. No. Wt. lbs./c G-02 Galv-Krōm finish 2 U.L. Listed for raceway. Mounts to 2" x 2" raceway channel. Threaded for " conduit or fitting. No swivel action. 7 8 8 K 2 6 2 " Pipe Thread Kindorf 7 8 " I.D. 200 Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com K89

Surface Raceway and Lighting Support Systems G-02 Channel Swivel Joint Cat. No. Wt. lbs./c G-02 Galv-Krōm finish 25 Load rating 500# with a safety factor of. U.L. Listed for raceway. 9 2 dia. holes Total 2 Provides a 5 swivel action (to offset possible movement) for connection of 2" or 4" conduit to raceway channels. May be accepted for use with 8" fixture stem when specified. Order two G-974-4" fasteners for channel mounting. 4 Pipe thread with to 4 2 reducer 8 2 6 4 5 2 6 K Cover for G-2000 through G-2004 junction boxes. Use with 4" or 2" conduit. Swivel action. G-0 4 Inch Diameter Swivel Cover Cat. No. Wt. lbs./c G-0 Galv-Krōm finish 5 Load rating 400# with a safety factor of three. U.L. Listed for raceway. Kindorf 4 5" 4 Pipe Thread with 4 to 2 Reducer 2 6 K90 200 Thomas & Betts Corporation. Specifications are subject to change without notice. www.tnb.com

WDG Architecture, PLLC 025 Connecticut Avenue NW Suite 00 Washington DC 2006 tel 202 857 800 fax 202 46 298 e-mail wdg@wdgarch.com Interior Design WDG ARchitecture Number LEVEL ROOM NAME FLOOR FLOOR BASE BASE WALL WALL CEILING CEILING SUBSTRATE FINISH SUBSTRATE FINISH MATERIAL FINISH MATERIAL FINISH 0 ENTRANCE LOBBY CONCRETE CPT-0 GYP BD WB-0* GYP BD PT-0 GYP BD WHITE PAINT 02 FILM ROOM CONCRETE CPT-0 GYP BD WB-0* GYP BD PT-0 ACT 0 FILM STORAGE ROOM CONCRETE RF-0 GYP BD WB-0* GYP BD PT-0 ACT 04 CONFERENCE ROOM CONCRETE CPT-0 GYP BD WB-0* GYP BD PT-0 ACT 05 SECURE FILE ROOM CONCRETE RF-0 GYP BD WB-0* GYP BD PT-0 ACT 06 CLOSET CONCRETE CPT-0 GYP BD WB-0* GYP BD PT-0 GYP BD WHITE PAINT 06 RECEPTION DESK CONCRETE RF-0 GYP BD WB-0* GYP BD PT-0 GYP BD WHITE PAINT COMMENTS 07 DIRECTOR'S OFFICE CONCRETE CPT-0 GYP BD WB-0* GYP BD PT-0 ACT PT-02 Orange on the exterior of Office Walls, see Interior Elevations 07 GUEST SEATING CONCRETE CPT-02 GYP BD WB-0* GYP BD PT-0 GYP BD WHITE PAINT 08 STORAGE ROOM CONCRETE RF-0 GYP BD WB-0* GYP BD PT-0 GYP BD WHITE PAINT 08 MAIN ENTRANCE CONCRETE CPT-0 GYP BD WB-0* GYP BD PT-0 GYP BD WHITE PAINT 0 QUIET ROOM CONCRETE CPT-0 GYP BD WB-0* GYP BD PT-0 ACT COPY/PRINTING ROOM CONCRETE RF-02 GYP BD WB-0* GYP BD PT-0 ACT PT-0 Gold on the exterior of Copy Room walls, see Interior Elevations 2 KITCHEN CONCRETE RF-02 GYP BD WB-0* GYP BD PT-0 GYP BD WHITE PAINT STAFF WORK AREA CONCRETE CPT-0 GYP BD WB-0* GYP BD PT-0 ACT 5 CLOSET 2 CONCRETE RF-02 GYP BD WB-0* GYP BD PT-0 GYP BD WHITE PAINT Finishes: CPT-0: Bolyu/Point of View/Orientation PT404/24 x 24 CPT-02: Bolyu/ AER 25/ High Altitude/ Aerial Map/24 x 24 RF-0: Armstrong/Imperial Texture/Standard Excelon/5927 Field Gray/2 x 2 RF-02: Mannington Commercial/Amtico Collection/Shibori Jasmine Arow7800/6 x 6 SSUR-0: Zodiaq/Coarse Carrara SSUR-02: Zodiaq/Galaxy Black PLAM-0: Leedo/D Laminate/Como/White PT-0: PMS 5 C: M:2 Y:94 K:0 R:255 G:27 B:5 #ffd92 (Gold) PT-02: PMS 52 C:5 M:67 Y:00 K:0 R:24 G:4 B:0 #ea7200 (Orange) PT-0: Benjamin Moore/Color Preview/White 025 Connecticut Ave, NW Suite 00 Washington DC 2006 tel 202.857.800 fax 202.857.068 e-mail MEP Engineer Global Engineering Solutions 55 Piccard Drive Suite 260 Rockville MD 20850 tel 0.26.287 fax 0.26.967 e-mail 04 CONFERENCE ROOM 07 DIRECTOR'S OFFICE CPT-0 Robinson Hall Marketing Suite 4000 Jericho Park Road Bowie MD 2075-9465 CPT-0 CPT-0 STAFF WORK AREA 06 CLOSET CPT-0 Bowie State University 4000 Jericho Park Road Bowie, MD 2075-9465 Tel. 0.860.4000 0 FILM STORAGE ROOM 05 SECURE FILE ROOM RECEPTION DESK # 95% CD'S 04.0.4 00% CD'S 2.09.4 2 Issued for Bid 0.2.5 RF-0 RF-0 GUEST SEATING COPY/PRINTING ROOM 02 FILM ROOM CPT-02 0 ENTRANCE LOBBY RF-02 0 QUIET ROOM CPT-0 RF-02 2 KITCHEN CPT- CPT-0 RF-0 08 STORAGE ROOM 5 CLOSET 2 RF-02 Professional Seal I certify that these documents were prepared or approved by me and that I am a duly licensed architect under the laws of the State of Maryland, License Number 2-A, Expiration Date 05..204 204 WDG Project No: WA206. FINISH FLOOR PLAN Finish Plan SCALE: /4" = '-0" SCALE: /4" = '-0" A2.2