Abrasive Tools/Separating Tools Separating Tools.

Saw frame Jig saw blades Circular saw blades Hole saws Power hack saw blades Saw bands Workshop files Precision files Needle files Rifflers Shaper planes Wood rasps File handles Sharpening files Whetstones Hand laps 4 4.3 4.22 41 41.1 41.18 42 42.1 42.4 Matt-finishing wheels Abrasive caps Abrasive belts Abrasive cloth Sandpaper Fibre discs Abrasive flap discs Burrs Grinding and polishing points Polishing paste Grinding discs Rough grinding discs Cutting-off discs Dressing tools Diamond dresser 43 43.1 43.3 44 44.1 44.34 46 46.1 46.2 File brush Rotary end brushes Wire wheels Cup brushes Tapered brushes Tube brushes Internal brushes Honing brushes 47 47.1 47.1

Our suppliers for ABRASIVE TOOLS/SEPARATING TOOLS: ß Q x 1 w J U m G B H g i 1 c Info ß Abrasives The quality products of the following manufacturers which are available from ß ß Q m G H g 1 are in compliance with the ( quality standard In close collaboration with the Federation of European Producers of Abrasives (FEPA), ( pursues the objective of maintaining and improving the currently achieved safety standard, and making this standard more transparent for the users and consumers. The members produce safe and accident-preventing grinding tools and specially mark them so that the user can easily recognise them. ( members are obligated to manufacture and market their grinding tools and have them certified in accordance with the safety regulations specified in the procurement directives. 4.2 Fax order hotline: +49 624 739-1217

433 With multi-purpose saw blade (PUK) and reinforced plastic handle. For metal, plastics, wood. Multi-purpose pocket hacksaw Spare blades see cat.-no. 439 and 44. Span length 433 146 11 433 435-44 Multi-purpose pocket hacksaws/junior hacksaws PUK 2 435 Multi-purpose pocket hacksaw Handle adjustable in all directions for sawing at points where access is difficult, frame made of square steel, nickel-plated, with clamped multi-purpose saw blade for burr-free cutting of all coon materials. Length 31, folded 19. For industry, trades, do-it-yourselfers, hobbyists, households. In the most confined spaces, it quickly and effortlessly cuts pipes, bars, profiles, strips, rails, screws, cable, branches, etc. 437 Junior Hacksaw PUK 2 Frame made of round steel, surface powder-coated, black, with red plastic handle and clamped multi-purpose saw blade for burr-free cutting of all coon materials, length 24 439 Spare saw blades Metal saw blade, corrugated fine serration, tooth pitch,8, 32 teeth per inch. Pack = 12 pieces For high quality saw cuts: All metals, non-ferrous metals (copper), stainless steels, special alloys, Plexiglas, plastics. 44 Spare saw blades Metal fine saw blade, extremely fine serration, tooth pitch,5, 5 teeth per inch. Pack = 12 pieces For clean, highest quality cuts: Very thin rods, strips, fine sheet metals, thin-walled profiles/pipes, hard and high-alloyed steels, aluminium, brass, copper, etc., particularly suitable for electronics and model construction. 435 437 439 435 437 439 44 11 11 11 11 417 Frame With ergonomically-shaped, non-slip plastic handle. Delivery without saw blades. For tasks in hard-to-reach places. For hand saw blades 25 and 3. Only use bi-metal saw blades, see cat.-no. 4224-4225. 417 417 11 418 Metal saw frame x With SANDFLEX bi-metal saw blade for metal and plastic. For tasks in hard-to-reach places. For hand saw blades 25 and 3. Only use bi-metal saw blades, see cat.-no. 4224-4225. 418 418 11 Fax order hotline: +49 624 739-1217 4.3

Saw frames Hacksaw blades 419 Metal saw frame x Frame made of oval tubular steel. Working radius 165. With plastic blade guard, knuckle guard and clamping lever. Fits into every tool box. Complete with pointed-tooth saw blade for wood and SANDFLEX bi-metal saw blade for metal and plastic. For cutting ceramics, a carbide rod saw with a length of 3 can be used. For hand saw blades 3. Hand saw blades see cat.-no. 4212-4228. 419 419 11 4195 Metal saw frame J With reversed bow, one-block frame made of shockproof cast resin, lightweight, handy, corrosion-resistant (1). Ergonomic handle with firm grip for the hand (2), metal core for tension and integrated clamping crank.(3) Saw blade tension to 8 kg with play adjustment system.(4) Wide hand guard.(5) 2 saw blade positions (45 and 9 ), one is for flush cuts (6). Minimal -blind angle- at first cut (7). Rear bevelled frame keeps cutting edge free. Rest for the left (second) hand (8). Complete with bi-metal hand saw blade, 24 teeth per inch. For hand saw blades 3. Hand saw blades see cat.-no. 4212-4228. (3) (4) (5) (6) (7) (8) (1) 4195 (2) 8 Kg 9 45 mini 4195 11 422-428 Metal saw frames For hand saw blades 3. Hand saw blades see cat.-no. 4212-4228. 422 x Traditional metal saw frame with wooden handle. Delivery with SANDFLEX saw blade. 424 With ergonomically-shaped handle made of light alloy injection moulding and blade clamping with wing nut. Heavy-duty, stable frame. Negative curve on back saw frame - thus no deformation when tightening the blade. With captive pins. Delivery without saw blade. 426 x Lightweight 2-component frame with steel core for easy handling. High blade tension of 1 kg for straight, clean cuts with precise kerfs. Clamping mechanism integrated in the handle. Alternative blade tension at 55 for flush cuts. Complete with practically unbreakable SANDFLEX bi-metal saw blade, with 24 teeth per inch, for excellent cutting results. 427 x Ergonomic, professional metal frame with extremely high blade tension. Centred blade for perfect balance, spring-tightened blade mounting for fast blade change. Alternative blade tension at 55 for flush cuts. Equipped with unbreakable SAND- FLEX bi-metal saw blade, 24 teeth per inch. For straight, clean cuts and precise kerfs. For hand saw blades 3. 428 Blade tightening at 9 and 5. Solid, sturdy type. Handle made of special cast aluminium, with hand guard. Clamping mechanism integrated in the handle. Delivery without saw blade. 422 424 426 427 428 x x x 422 424 426 427 428 11 11 21 11 11 4.4 Fax order hotline: +49 624 739-1217

42 - Made completely of pressure cast aluminium - Weight just 65 g - Ergonomic shape - Comfortable use thanks to soft rubber handle and front grip Aluminium saw frame - Fast-clamping in the haft - Blade holder through captive pins - Delivery without saw blade. For hand saw blades 3. Hand saw blades see cat.-no. 4212-4228. For saw blade length Weight 42 g 3 65 11 42 4212-4225 Single-sided metal hacksaw blades 3 x 13 x,65. Teeth per inch: 18 teeth for solid material above approx. 5 thickness. 24 teeth for sheet metal and profiles. 32 teeth for very thin sheet metal and profiles with a thickness of less than approx. 2. 4212 Flexible, tooth-hardened blade. For multi-purpose use in industry and workshop. Flex-SS-hard tooth. 4218 Flexible, crossed blade. For cutting hard and tough but flexible steel. HSS fully hardened 422 ß For cutting extremely hard steels. HSS DMo5 completely through-hardened. 4224 x SANDFLEX Virtually unbreakable and non-chipping with precision-ground teeth. Back of blade made of resistant, flexible spring steel. Tooth edge of highalloyed Super-HSS steel. For all metal cutting purposes. Bi-metal 4225 Semi-flexible, heavy-duty, break-proof safety blade. Multi-purpose use, also for hard, high-alloyed steels or stainless steels. Extremely long service life and high cutting force. HSS bi-cobalt, hardened tooth tips and semi-flexible. 4225 14 With progressive tooth pitch. 4212 4218 422 4224 4225 21-23 4225 14 Flex-SS HSS HSS DMo5 Bi-metal HSS Bi-cobalt TPI 4212 4218 422 4224 4225 per inch a 18 1 pieces 11 21 24 1 pieces 12 12 22 12 22 32 1 pieces 13 23 18-32 1 pieces 14 4226-4228 Double-sided metal hacksaw blades For multi-purpose use in industry and workshop. 4226 Flexible, tooth-hardened blade. Flex-SS-hard tooth. 4228 With hardened teeth, very flexible. Particularly suited for free-hand sawing. Alloyed tool steel 4226 4228 Flex-SS WS TPI Dimensions 4226 4228 per inch a 24 3 x 25 x,8 1 pieces 12 24 3 x 25 x,65 1 pieces 11. ( ) = Klaerpreise teilweise # aus = partly Lagervorrat. extent in stock. in the catalogue. Purchase orders must be in units. Fax order hotline: +49 624 739-1217 4.5 a

Jig saw blades Info Pictograph overview For jig, sword, tiger, car body, and circular saw blades (cat.-no. 4229-4239) Aluminium Laminated sheets Solid wood Stainless steel Sheets Profiles Non-ferrous metals Pipes Eternit boards Sandwich boards Fresh, wet wood Chipboard Gas concrete Plywood Plasterboard Cement-bound chipboard Steel, iron Glass Coreboard Hard-fibre boards Straight cuts Hardwood and softwood Curve cuts Wood with nails Rectangular cuts Ceramics, clay Clean cut Plastics Fast cut 4.6 Fax order hotline: +49 624 739-1217

423 Jig Saw Blades HSS Suitable for AEG, Atlas Copco, Bosch, ELU, Festool, Flex, Hitachi, Holz-Her, Kanggo Wolf, Kress, Makita, Metabo, Milwaukee, Perles. HSS. 423 11-111 Pack = 5 pieces 423 22-24 Pack = 2 pieces 423 31 Multi set metal: 8 x cat.-no. 423 12, 8 x cat.-no. 423 13, 4 x cat.-no. 423 14. Tooth Usable Same as 423 pitch length Bosch no.,9 corrugated, 36 tpi 5 1 thick T 118 G for thin sheet steel 11 1,2 corrugated, 12 21 tpi 5 1 thick T 118 A 22 2, corrugated, 13 13 tpi 5 1 thick T 118 B 23 3, crossed, 14 8 tpi 75 1 thick T 127 D 24 3, crossed, 8 tpi 75 1,3 thick - With back toothing 15 tapered 2, ground, 13 tpi 75 1,45 thick T 11 A 17 3, crossed, 8 tpi 75 1 thick T 227 D 18 1,2 tapered, 21 tpi 5 1 thick T 218 A 19 1,2-2,5 crossed, 24-1 tpi 75 1 thick T 123 X Progressive tooth pitch 111 8 pieces 1,2 tapered, 21 tpi 5 1 thick T 118 A 8 pieces 2, tapered, 13 tpi 5 1 thick T 118 B 4 pieces 3, crossed, 8 tpi 75 1 thick T 127 D 31 Pack = 423 5 11 5 12 2 22 5 13 2 23 5 14 2 24 5 15 5 17 5 18 5 19 5 111 Multi set 31 Fax order hotline: +49 624 739-1217 4.7

Jig saw blades 4232 Jig Saw Blades WS Suitable for AEG, Atlas Copco, Bosch, ELU, Festool, Flex, Hitachi, Holz-Her, Kanggo Wolf, Kress, Makita, Metabo, Milwaukee, Perles. Tool steel. 4232 13-125 Pack = 5 pieces 4232 28 Pack = 2 pieces 4232 31 Multi set wood: 8 x cat.-no. 4232 18, 8 x cat.-no. 4232 11 and 4 x cat.-no. 4232 112. Tooth Usable Same as 4232 pitch length Bosch no. 3, crossed, 8 tpi 75 1,3 thick T 111 C 13 2,5 tap. ground 18 1 tpi 75 1,45 thick T 11 B 28 4, tap. ground, 6 tpi 75 1,45 thick T 11 D 19 4, crossed, 6 tpi 75 1,3 thick T 144 D 11 1,35 tap. ground, 18 tpi 5 1,25 thick T 11 AO Pointed teeth 111 2, tapered, 13 tpi 5 1 thick T 119 BO 112 4, crossed, 6 tpi 75 1,3 thick T 244 D 113 2,5 tap. ground, 1 tpi 75 1,4 thick T 11 BR Reverse cutting direction 115 4, tap. ground, 6 tpi 85 1,45 thick T 31 D 116 4,/1,2 crossed, 6/21 tpi 75 1,3 thick - With back toothing 117 2,5/1,2 tap. ground., 1/21 tpi 75 1,45 thick - With back toothing 118 4, tap. ground, 6 tpi 75 1,7 thick T 11 DP 12 4, tap. ground, 6 tpi 11 1,45 thick T 31 DL Special tooth shape 123 2,-3, tap. ground., 13-8 tpi 9 1,45 thick T 234 X Progressive tooth pitch 125 8 pieces 2,5 tap. ground 1 tpi 75 1,45 thick T 11 B 8 pieces 4, crossed 6 tpi 75 1,3 thick T 144 D 4 pieces 2, corrugated, 13 tpi 5 1 thick T 119 BO 31 4.8 Fax order hotline: +49 624 739-1217

Pack = 4232 5 13 5 18 2 28 5 19 Pack = 4232 5 11 5 111 5 112 5 113 Pack = 4232 5 115 5 116 5 117 5 118 Pack = 4232 5 12 5 123 5 125 Multi set 31 4231 Jig Saw Blades Bi-Metal Suitable for AEG, Atlas Copco, Bosch, ELU, Festool, Flex, Hitachi, Holz-Her, Kanggo Wolf, Kress, Makita, Metabo, Milwaukee, Perles. Bi-metal 4231 11-112 Pack = 5 pieces 4231 21-23 Pack = 2 pieces Tooth Usable Same as 4231 pitch length Bosch no. 1,2 corrugated, 11 21 tpi 5 1 thick T 118 AF 21 2, corrugated, 13 13 tpi 5 1 thick T 118 BF 23 3, crossed, 8 tpi 75 1 thick T 127 DF 14 2,5 tap. ground., 1 tpi 75 1,45 thick T 11 BF 17 1,8-2,4 crossed, 14-1 tpi 11 1,3 thick - Combination tooth shape 18 1,65 tapered ground, 15 tpi 75 1,25 thick T 11 AIF Pointed teeth 11 2,5-5, crossed, 1-5 tpi 15 1,25 thick T 345 XF Progressive tooth pitch 112 Pack = 4231 5 11 2 21 5 13 4233 Jig Saw Blades, Carbide Pack = 4231 2 23 5 14 5 17 Pack = 4231 5 18 5 11 5 112 Suitable for AEG, Atlas Copco, Bosch, ELU, Festool, Flex, Hitachi, Holz-Her, Kanggo Wolf, Kress, Makita, Metabo, Milwaukee, Perles. Pack = 1 piece Carbide. Tooth Usable Same as 4233 pitch length Bosch no. crossed, - 5 1.3 thick T 13 Riff 11 Bi-metal 1,1 tapered, 24 tpi 5 1 thick T 118 AHM Especially for VA-steel 15 Bi-metal 1,4 tapered, 18 tpi 5 1 thick T 118 EHM Especially for VA-steel 17 Pack = 4233 1 11 Pack = 4233 1 15 Pack = 4233 1 17 Fax order hotline: +49 624 739-1217 4.9

Jig saw blades 4229 Jig saw blades HSS/WS for Fein and Kanggo-Wolf Suitable for Fein: ASt 636-1, ASt 636b, ASte 636-1, Mot 6-17-1. Kanggo-Wolf: 6544, 6552. 4229 12-14 HSS. Pack = 5 pieces 4229 118 Tool steel. Pack = 5 pieces Tooth Usable Same as 4229 pitch length Bosch no. 1,2 corrugated, 21 tpi 5 1 thick Z 22-35 12 2, corrugated, 13 tpi 5 1 thick Z 22-36 13 3, crossed, 8 tpi 75 1 thick - Specially for aluminium 14 4, tap. ground, 6 tpi 75 1,45 thick 82 1 118 Pack = 4229 5 12 5 13 5 14 5 118 4234 Long jig saw blades Suitable for AEG, Atlas Copco, Bosch, ELU, Festool, Flex, Hitachi, Holz-Her, Kango Wolf, Makita, Metabo, Milwaukee, Perles. Pack = 5 pieces 4234 11 Tool steel. 4234 12-13 Bi-metal Tooth Usable Same as 4234 pitch length Bosch no. 4, crossed, 6 tpi 11 1,3 thick T 344 D 11 Bi-metal 2, corrugated, 13 tpi 1 1 thick T 318 BF 12 Bi-metal 1,2 tapered, 21 tpi 1 1 thick T 318 AF 13 Pack = 4234 5 11 5 12 5 13 When you are king...... your wishes come true. www.atorn.de Performance requires quality 4.1 Fax order hotline: +49 624 739-1217

4235 Sword/tiger saw blades bi-metal Suitable for AEG, Atlas Copco, Black & Decker, Bosch, Fein, Flex, Hitachi, Holz-Her, Makita, Metabo, Milford, Milwaukee, Rockwell, Rems, Skill, etc. Pack = 5 pieces Bi-metal Tooth- Overall Same as 4235 pitch length Bosch no. 2,5 crossed, 1 tpi 15 1 thick S 922 H 21 1,8 crossed, 14 tpi 15 1 thick S 922 BF 211 1,4 corrugated, 18 tpi 15 1 thick S 922 EF 212 1, tapered, 25 tpi 15 1 thick S 922 AF 213 1,8 crossed, 14 tpi 2 1 thick S 1122 BF 217 1,4 tapered, 18 tpi 2 1 thick S 1122 EF 218 1,8-2,4 crossed, 14-1 tpi 2 1,3 thick S 122 VF Combination tooth shape 219 2,5 crossed, 1 tpi 3 1 thick S 1211 H 224 1,8-2,4 crossed, 14-1 tpi 3 1,3 thick S 1222 VF Combination tooth shape 225 1,8-2,4 crossed, 14-1 tpi 15 1,3 thick S 922 VF Combination tooth shape 229 2,5 crossed, 1 tpi 25 1,3 thick - Specially for pallet production 23 4,2 crossed, 6 tpi 15 1,3 thick - 231 4,2 crossed, 6 tpi 25 1,3 thick - 232 1,75-3, crossed, 14-8 tpi 15 1,3 thick - Progressive tooth pitch 235 2,5-4,5 crossed, 1-5 tpi 2 1,3 thick S 3456 XF Progressive tooth pitch 236 Pack = 4235 5 21 5 211 5 212 5 213 Pack = 4235 5 217 5 218 5 219 5 224 Pack = 4235 5 225 5 229 5 23 5 231 Pack = 4235 5 232 5 235 5 236 Fax order hotline: +49 624 739-1217 4.11

Jig saw blades Circular saw blades 4236 Sword/tiger saw blades TS Suitable for AEG, Atlas Copco, Black & Decker, Bosch, Fein, Flex, Hitachi, Holz-Her, Makita, Metabo, Milford, Milwaukee, Rockwell, Rems, Ridgid, Skill, etc. Pack = 5 pieces Tool steel. Tooth Overall Same as 4236 pitch length Bosch no. 4,2 crossed, 6 tpi 15 1,3 thick S 644 D 21 4,2 crossed, - 6 tpi 3 1,3 thick 211 4-6,5 crossed, 5 tpi 25 1,3 thick S 1531 L 218 Pack = 4236 5 21 Pack = 4236 5 211 Pack = 4236 5 218 4237 Suitable for AEG, Atlas Copco, Black & Decker, Bosch, Fein, Flex, Hitachi, Holz-Her, Makita, Metabo, Milford, Milwaukee, Rockwell, Rems, Ridgid, Skill, etc. Pack = 1 pc. Sword/tiger saw blades, carbide Carbide. Tooth Overall Same as 4237 pitch length Bosch no. Tool steel carbide-equipped, - 15 1 thick S 113 Riff 11 crossed, 8,5 carbide equipped, 3 tpi 22 1,3 thick S 1141 HM 14 crossed, 8,5 carbide equipped, 3 tpi 4 1,3 thick - 16 Pack = 4237 1 11 Info Pack = 4237 1 14 Pack = 4237 1 16 offers a wide variety of electric compass, jig and circular saws. See our catalogue, group 92. 4.12 Fax order hotline: +49 624 739-1217

4239 Car Body Jig Saw Blades Bi-Metal Suitable for pneumatic, as well as electric machines from SIG, Flex, Pneutec, Chicago-Pneumatic, Shinano, Ober, Red-Rooster, Yokota, Holger-Clasen, PMS. Pack = 5 pieces Bi-metal 4239 11 St 37, V2A, non-ferrous metal sheet steel with a thickness of up to 1. 4239 12 St 37, V2A, non-ferrous metal sheet steel with a thickness of up to 2. 4239 13 St 37, non-ferrous metal sheets to 2.5, plastics, hard fabric. Tooth pitch Overall length 4239,8 32 tpi 76 11 1, 24 tpi 76 12 1,8 14 tpi 76 13 Pack = 4239 5 11 5 12 5 13 4238 Circular saw blades, carbide Alternative top bevel tooth, carbide-equipped. Suitable for AEG, Atlas Copco, Bosch, ELU, Festool, Milwaukee, etc. Saw blade Ø Bore Ø No of Cutting 4238 teeth width 16 2 12 2,4 11 19 3 16 2,4 12 16 2 48 2,8 13 19 3 48 2,8 14 Pack = 4238 1 11 1 12 Pack = 4238 1 13 1 14 Fax order hotline: +49 624 739-1217 4.13

Hole Saws 424-4242 Hole Saws (Cylinder Saws) Teeth precision milled, low tolerance of tooth pitch, with variable tooth pitch, therefore more room for chips. Low-vibration sawing, robupieces With solid base plate, therefore more thread and higher stability and true-running accuracy. Problems with conventional hole saws, like cracked or overturned threads, are considerably minimised by this new tool construction. For cutting holes in metal, wood with nails, plywood, fibreboard, plastics, pipes, panels. For use in column drilling machines and low-speed hand drills as well as lathes. Cutting depth up to approx. 38. HSS Bi-metal. 4242 Hole saws, single. Supplied without arbor and pilot drill. 4242 Hole saw also suitable for other standard arbors. Set contents 424 21 12 hole saws Ø 16 / 19 / 22 / 25 / 29 / 32 / 35 / 38 / 44 / 51 / 64 / 76, 1 arbor A 6, 1 arbor A 2-SS, 1 spare pilot drill. 424 Set contents 424 22 9 hole saws Ø 16 / 19 / 22 / 29 / 35 / 44 / 52 / 57 / 67, 1 arbor A 6, 1 arbor A 2-SS, 1 spare pilot drill. Set contents 424 23 8 hole saws Ø 16 / 19 / 24 / 29 / 38 / 44 / 57 / 67, 1 arbor A 6, 1 arbor A 2-SS, 1 spare pilot drill. Set contents 424 24 7 hole saws Ø 22 / 29 / 35 / 44 / 51 / 64 / 68, 1 arbor A 6, 1 arbor A 2-SS, 1 spare pilot drill. Content 424 Set Profi 15-pieces in storage case 21 Set Standard 12-pieces in storage case 22 Set Installation 11-pieces in storage case 23 Set Elektro 1-pieces in storage case 24 single Ø 4242 14 2 16 21 17 26 19 22 2 261 21 23 22 24 24 262 25 25 27 26 29 27 3 28 32 29 33 21 single Ø 4242 35 211 37 27 38 213 4 272 41 214 43 274 44 215 46 276 48 216 51 217 52 28 54 218 57 219 59 282 single Ø 4242 6 221 64 222 67 223 68 224 7 225 73 226 76 228 79 229 83 23 86 288 89 231 92 232 95 29 98 292 single Ø 4242 12 233 15 234 18 294 111 # 296 114 235 121 298 127 236 14 237 152 238 16 # 246 168 # 25 177 # 254 21 # 258 4.14 Fax order hotline: +49 624 739-1217

4244-4248 Accessories for hole saws 4244 Arbor With centre drill HSS. The arbor A 2-SS cat.-no. 4244 12 is a quickexchange arbor with solid shank. Therefore no deforming effect in the drilling chuck. 4246 Arbor extension Length 3. Fits arbors A 6 and A 2-SS. 4247 Spare centre drills HSS. 4248 Ejection spring 4244 11 4244 12-13 4244 14 4244 15 4246 4248 Arbor extension E-pilot drill Ejection spring for saw Ø Shank Ø Shank type 4244 4246 4247 4248 14-3 A 6 9,5 6kant 11 11 12 11 32-152 A 2-SS 9,5 6kant 12 11 12 11 32-21 A 3-SS 11,11 6kant 13 12 11 14-3 A 6-SDS-plus - SDS 14 12 11 32-152 A 2-SDS-plus - SDS 15 12 11 4249-4252 Carbide Hole Saws ß Hole saw with integrated holder. High concentricity accuracy thanks to stable construction. Positive rake angle for good chip removal. 12 use height/overall height. Ø 15,2-5 shank Ø 1. Ø 51-1 shank Ø 13. Flat-cut type for materials with a thickness of up to 4 or of up to 2 in V2A-, V4A-steel, glass fibre, plastics, armoured materials, PVC, aluminium, zinc, plaster and fibre panels. For hand and column drilling machines. Carbide-equipped. Pilot drill and ejection spring included. Deep-cutting type for cutting pipes available on requepieces 4249 Hole Saw Set 5-pieces, incl. 2 Allen keys. 425 Hole saws, single. 4252 Spare centre drills For cat-no. 4249-425. HSS. 4249 425 Set contents Hole saw Ø 4249 5-pieces 16 / 2 / 25 / 32 / 4 in plastic case 11 Drill Ø For core bit Ø 4252 Spare centre drills 6 15,2-1 11 Ø 425 15,2 PG 9 11 16 M 16 12 17-13 18-14 18,6 PG 11 15 19-16 2 M 2 17 2,4 PG 13 18 21-19 22-11 22,5 PG 16 111 23-112 25 M 25 114 26-115 Ø 425 27-116 28-117 28,3 PG 21 118 29-119 3-12 32 M 32 122 33-123 34-124 35-125 36-126 37 PG 29 127 38-128 39 - # 129 4 M 4 13 Ø 425 42-132 43-133 44-134 45-135 46 - # 136 47 PG 36 137 48-138 49-139 5 M 5 14 51 - # 141 52 - # 142 53-143 54 PG 42 144 55-145 Ø 425 57 - # 147 58 - # 148 59 - # 149 6 PG 48 15 63 M 63 19 65-151 68-152 7-153 75-154 8-156 85-157 9 - # 158 95 - # 159 1-16 Fax order hotline: +49 624 739-1217 4.15

Machine saw blades Info Recoendations for choosing the correct band saw blade The correct serration Selecting the right tooth pitch is crucial for optimal cutting results: - The tooth pitch results from the usable length of the band saw blade - If the serration is too small, this can result in undesirable results, because the chips clog the chip compartments and the band saw blade is forced in a different direction. - If the serration is too large, teeth might break because the load on a given tooth is too high. - At least 3 teeth should be in the material at all times in order to achieve an economical result. Sawing of solid stock Standard tooth Combination tooth Material Cross section Tooth pitch w. tooth shape Material Cross section Tooth pitch w. tooth up to 15 14 tpi N up to 3 1/14 standard 15-3 1 tpi N 2-5 8/12 standard 3-5 8 tpi N 25-7 6/1 standard 5-8 6 tpi N/KL 35-9 5/8 tpi standard 8-12 4 tpi KL 5-1 4/6 tpi plus* 12-2 3 tpi KL 8-15 3/4 tpi plus* 2-4 2 tpi KL 12-35 2/3 tpi plus* 4-8 1,25 tpi KL 25-6 1,4/2 tpi plus* above 8,75 tpi KL greater than 5,75-1,25 tpi plus* Sawing of pipes and profiles Wall thickness TPI Diameter (B) S 2 4 6 8 1 12 15 2 3 5 75 1 2 32 24 18 18 14 14 1/14 1/14 8/12 6/1 5/8 5/8 3 24 18 14 14 1/14 1/14 8/12 8/12 6/1 5/8 4/6 4/6 4 18 1/14 1/14 1/14 8/12 8/12 6/1 6/1 5/8 4/6 4/6 4/6 5 18 1/14 1/14 8/12 6/1 6/1 6/1 5/8 4/6 4/6 4/6 3/4 6 14 8/12 8/12 8/12 6/1 6/1 5/8 5/8 4/6 4/6 3/4 3/4 8 6/1 6/1 6/1 5/8 5/8 5/8 4/6 4/6 3/4 3/4 1 6/1 6/1 5/8 5/8 5/8 4/6 4/6 4/6 3/4 3/4 12 5/8 5/8 5/8 4/6 pos 4/6 pos 4/6 pos 4/6 pos 3/4 pos 3/4 pos 2/3 pos 2/3 pos 15 5/8 4/6 pos 4/6 pos 4/6 pos 4/6 pos 3/4 pos 3/4 pos 2/3 pos 2/3 pos 2/3 pos 2 4/6 pos 4/6 pos 4/6 pos 3/4 pos 3/4 pos 3/4 pos 2/3 pos 2/3 pos 2/3 pos 2/3 pos 3 3/4 pos 3/4 pos 3/4 pos 3/4 pos 2/3 pos 2/3 pos 2/3 pos 1,4/2 pos 1,4/2 pos 5 3/4 pos 2/3 pos 2/3 pos 2/3 pos 1,4/2 pos 1,4/2 pos 1,4/2 pos 75 2/3 pos 1,4/2 pos 1,4/2 pos 1,4/2 pos,75/1,25 pos 1 1,4/2 pos,75/1,25 pos,75/1,25 pos,75/1,25 pos 15,75/1,25 pos,75/1,25 pos,75/1,25 pos 2,75/1,25 pos,75/1,25 pos,75/1,25 pos Decisive factors for choosing the correct tooth pitch: - Sawing of pipes and profiles in layers and bundles - Sawing of single pipes and profiles 4.16 Fax order hotline: +49 624 739-1217

4412 Multi-purpose machine saw blade. Suitable for normal to difficult separating tasks. Special Power Hacksaw Blades HSS HSS. 4412 L x W x T Teeth 4412 3 x 25 x 1,25 14 11 3 x 25 x 1,25 18 # 12 3 x 25 x 1,5 8 # 13 3 x 25 x 1,5 1 14 3 x 25 x 1,5 14 15 35 x 3 x 1,5 6 # 16 35 x 3 x 1,5 8 # 17 35 x 3 x 1,5 1 # 18 35 x 3 x 1,5 14 # 19 35 x 3 x 2, 4 11 35 x 3 x 2, 6 111 35 x 3 x 2, 8 # 112 35 x 3 x 2, 1 # 113 L x W x T Teeth 4412 4 x 25 x 1,25 14 # 114 4 x 25 x 1,5 1 115 4 x 25 x 1,5 14 # 116 4 x 3 x 1,5 8 117 4 x 3 x 1,5 1 118 4 x 3 x 1,5 14 119 4 x 3 x 2, 4 # 12 4 x 3 x 2, 6 121 4 x 3 x 2, 8 122 4 x 3 x 2, 1 123 4 x 4 x 2, 4 # 124 4 x 4 x 2, 6 125 4 x 4 x 2, 8 # 126 L x W x T Teeth 4412 45 x 3 x 2, 4 127 45 x 3 x 2, 6 128 45 x 3 x 2, 8 129 5 x 4 x 2, 6 131 5 x 4 x 2, 8 132 55 x 4 x 2, 4 # 133 55 x 5 x 2,5 6 134 6 x 5 x 2,5 6 # 138 65 x 5 x 2,5 4 139 65 x 5 x 2,5 6 # 14 7 x 5 x 2,5 4 141 7 x 5 x 2,5 6 # 142 4414 Multi-purpose machine saw blade. For KASTO power saws (offset clamping holes). For standard up to heavy-duty cutting-off projects. Special Power Hacksaw Blades HSS for KASTO-Hacksaws HSS. 4414 Saw blades for KASTO saws with a length less than 45 see cat.-no. 4412 L x W x T Teeth 4414 45 x 36 x 2, 4 11 45 x 36 x 2, 6 12 45 x 36 x 2, 8 13 55 x 45 x 2,5 4 # 17 L x W x T Teeth 4414 55 x 45 x 2,5 6 # 18 575 x 5 x 2,5 4 11 575 x 5 x 2,5 6 # 111 6 x 5 x 2,5 6 112 L x W x T Teeth 4414 65 x 55 x 2,5 4 # 113 65 x 55 x 2,5 6 114 7 x 55 x 2,5 4 115 7 x 55 x 2,5 6 # 116 4416 HSS tooth tips on spring-tempered blade, increased break resistance. Special Power Hacksaw Blades HSS Bi-Metal HSS Bi-metal. 4416 4418 HSS tooth tips on spring-tempered blade, increased break resistance. For KASTO power saws (offset clamping holes). Special Power Hacksaw Blades HSS Bi-Metal for KASTO Saws HSS Bi-metal. 4418 Saw blades for KASTO saws with a length less than 4 see cat.-no. 4416 L x W x T Teeth 4418 4 x 4 x 2, 4 11 4 x 4 x 2, 6 12 4 x 4 x 2, 1 # 13 L x W x T Teeth 4418 5 x 4 x 2, 6 # 14 6 x 5 x 2,5 4 16 6 x 5 x 2,5 6 # 17 L x W x T Teeth 4418 7 x 5 x 2,5 4 # 18 7 x 5 x 2,5 6 19 Fax order hotline: +49 624 739-1217 4.17

Band saw blades 469-4614 In 3 m rolls, hard teeth, flexible back, standard tooth -N-, standard setting Bandsaw blades in 5 m, 1 m and productionlength rolls available on requepieces 469 Tooth-hardened with flexible blade body. Suitable for cutting non-ferrous materials, unalloyed and low-alloy steels. Unalloyed tool steel Metal-cutting bandsaw blades TS 4614 Optimised by heat treatment and alloy techniques to provide greater cutting accuracy and cutting power. Suitable for cutting up to medium difficult to machine materials. Tool steel. 469-4614 Unalloyed WS WS W x T Teeth 469 4614 4 x,65 14 # 17 17 4 x,65 18 # 18 4 x,65 22 # 19 # 19 6 x,65 8 118 # 118 6 x,65 1 # 119 # 119 6 x,65 14 121 121 6 x,65 18 # 122 # 122 6 x,65 22 123 123 8 x,65 6 125 # 125 8 x,65 8 126 8 x,65 1 # 127 # 127 8 x,65 14 # 129 129 8 x,65 18 13 13 8 x,65 22 # 131 # 131 Unalloyed WS WS W x T Teeth 469 4614 1 x,65 6 # 133 133 1 x,65 8 134 134 1 x,65 1 135 135 1 x,65 14 137 137 1 x,65 18 # 138 # 138 1 x,65 22 # 139 # 139 13 x,65 8 # 15 13 x,65 1 # 151 # 151 13 x,65 14 # 153 # 153 13 x,65 18 # 154 # 154 13 x,65 22 # 155 16 x,8 6 157 16 x,8 14 # 161 25 x,9 3 # 174 25 x,9 8 # 177 4616 In 3 m rolls. Heavy-duty band saw blade, highly wear-resistant. Achieves maximum cutting performance in series production. HSS Bi-metal M 42 Cutting edge made of wear-resistant HSS bi-metal M 42. Metal-cutting bandsaw blades HSS Bi-metal M 42 Bandsaw blades in 5 m, 1 m and productionlength rolls available on requepieces 4616 W x T Teeth 4616 6 x,9 1 # 119 6 x,9 14 121 1 x,9 6 133 1 x,9 1 135 W x T Teeth 4616 1 x,9 14 137 13 x,9 6 149 13 x,9 1 151 13 x,9 14 153 When you receive quality...... then it s ATORN. www.atorn.de Performance requires quality 4.18 Fax order hotline: +49 624 739-1217

4624 Endless, ready for use, for horizontal and vertical bandsaw machines. Standard tooth -N-, standard set. Optimised by heat treatment and alloy techniques to provide greater cutting accuracy and cutting power. Metal-cutting bandsaw blades TS Suitable for cutting up to medium difficult to machine metal materials. Tool steel. Other dimensions available on requepieces L x W x T Teeth 4624 366 x 25 x,9 4 # 117 366 x 25 x,9 6 # 118 366 x 25 x,9 8 # 119 366 x 25 x,9 1 # 121 366 x 25 x,9 14 # 122 4624 4626-4628 Endless, ready for use, for horizontal and vertical bandsaw machines. HSS Bi-metal M 42 Cutting edge made of wear-resistant HSS bi-metal M 42. Metal-cutting bandsaw blades HSS Bi-metal M 42 4626 Heavy-Duty Band Saw Blade Standard tooth -N-, standard set. Very wear-resistant. Optimal fatigue strength. Achieves maximum cutting performance in series production. Suitable for non-ferrous materials and difficult-tomachine materials. 4626-4628 Other dimensions available on requepieces 4628 Combination tooth Different tooth pitches suppress vibration when machining. Therefore longer service life and better cutting surface. Suitable for most machinable materials. Also for tempered steel up to approx. 12 N/ 2. Saw bands with serration 1/14, 8/12, 6/1, 5/8 Saw bands with serration 4/6, 3/4, 2/3 L x W x T Teeth 4626 366 x 27 x,9 4 117 366 x 27 x,9 6 118 366 x 27 x,9 8 12 366 x 27 x,9 1 121 366 x 27 x,9 14 # 122 Combination tooth L x W x T Teeth 4628 114 x 13 x,65 6/1 # 1 114 x 13 x,65 8/12 # 11 114 x 13 x,65 1/14 # 12 1335 x 13 x,65 6/1 # 13 1335 x 13 x,65 8/12 # 14 1335 x 13 x,65 1/14 # 15 144 x 13 x,65 6/1 16 144 x 13 x,65 8/12 17 144 x 13 x,65 1/14 18 275 x 27 x,9 2/3 # 19 275 x 27 x,9 3/4 # 11 275 x 27 x,9 4/6 112 275 x 27 x,9 5/8 114 275 x 27 x,9 8/12 116 Combination tooth L x W x T Teeth 4628 328 x 27 x,9 3/4 # 118 328 x 27 x,9 4/6 12 328 x 27 x,9 6/1 122 366 x 27 x,9 2/3 # 124 366 x 27 x,9 3/4 125 366 x 27 x,9 4/6 126 366 x 27 x,9 6/1 128 383 x 27 x,9 2/3 # 132 383 x 27 x,9 3/4 133 383 x 27 x,9 4/6 134 415 x 27 x,9 2/3 # 142 415 x 27 x,9 3/4 # 143 415 x 27 x,9 4/6 144 Fax order hotline: +49 624 739-1217 4.19

Saw bands 475 Band saw blades tool steel WIKUS DIAMANT c In rolls of 3,5 m. tungsten-silicon-chrome alloyed belt with tempered back made of high-alloyed tool steel and especially hardened tooth tips. Long service life and good wear resistance. Suitable for the standard workshop all the way to machining of composite materials. For low-alloyed steel and steel of medium strength. Suitable for horizontal and vertical bandsaw machines. Tool steel. Other dimensions and serrations on rolls of 3,5 m available on requepieces W x T Teeth Tooth shape 475 6 x,65 6 hook tooth # 11 6 x,65 1 standard tooth # 12 6 x,65 14 standard tooth 13 13 x,65 4 hook tooth # 14 13 x,65 6 hook tooth # 15 13 x,65 14 standard tooth # 16 471-4711 Bi-Metal Band Saw Blades WIKUS VARIO M 42 475 c Tooth shape standard tooth, variable tooth pitch, wear-resistant tooth tips. For all horizontal and vertical bandsaw machines. Especially suitable for Vibration-prone sawing tasks in series cutting. For small and medium-sized workpieces. Suitable for steel up to a hardness of 45 HRC. WIKUS VARIO M 42. Other dimensions available on requepieces 471 In rolls of 3,5 m. 4711 Endless welded saw bands. 471-4711 4.2 WIKUS VARIO M 42 W x T Teeth Tooth shape 471 6 x,9 1/14 standard tooth # 11 1 x,9 1/14 standard tooth # 12 13 x,65 6/1 standard tooth # 13 13 x,65 1/14 standard tooth # 14 13 x,9 6/1 standard tooth # 15 13 x,9 1/14 standard tooth # 16 WIKUS VARIO M 42 L x W x T Teeth Tooth shape 4711 1335 x 13 x,65 8/12 standard tooth 11 144 x 13 x,65 6/1 standard tooth 12 144 x 13 x,65 1/14 standard tooth 13 1735 x 13 x,65 6/1 standard tooth 14 2 x 2 x,9 6/1 standard tooth # 15 214 x 2 x,9 6/1 standard tooth 16 214 x 2 x,9 1/14 standard tooth 17 236 x 2 x,9 6/1 standard tooth 18 2625 x 2 x,9 5/8 standard tooth # 19 2625 x 2 x,9 6/1 standard tooth 11 2625 x 2 x,9 1/14 standard tooth # 111 245 x 27 x,9 5/8 standard tooth 112 275 x 27 x,9 4/6 standard tooth 113 275 x 27 x,9 5/8 standard tooth # 114 276 x 27 x,9 4/6 standard tooth 115 276 x 27 x,9 5/8 standard tooth 116 276 x 27 x,9 6/1 standard tooth 117 276 x 27 x,9 8/12 standard tooth 118 2835 x 27 x,9 5/8 standard tooth # 119 289 x 27 x,9 4/6 standard tooth 12 289 x 27 x,9 6/1 standard tooth # 121 291 x 27 x,9 4/6 standard tooth 122 291 x 27 x,9 5/8 standard tooth 123 31 x 27 x,9 5/8 standard tooth 124 39 x 27 x,9 4/6 standard tooth # 125 Fax order hotline: +49 624 739-1217 WIKUS VARIO M 42 L x W x T Teeth Tooth shape 4711 39 x 27 x,9 8/12 standard tooth # 126 328 x 27 x,9 4/6 standard tooth # 127 328 x 27 x,9 6/1 standard tooth # 128 366 x 27 x,9 5/8 standard tooth 129 366 x 27 x,9 6/1 standard tooth # 13 366 x 27 x,9 8/12 standard tooth # 131 366 x 27 x,9 1/14 standard tooth # 132 377 x 27 x,9 4/6 standard tooth 133 377 x 27 x,9 6/1 standard tooth 134 38 x 27 x,9 6/1 standard tooth # 135 38 x 27 x,9 8/12 standard tooth # 136 38 x 27 x,9 1/14 standard tooth # 137 383 x 27 x,9 4/6 standard tooth # 138 487 x 27 x,9 4/6 standard tooth # 139 372 x 34 x 1,1 5/8 standard tooth # 14 372 x 34 x 1,1 6/1 standard tooth # 141 372 x 34 x 1,1 8/12 standard tooth # 142 464 x 34 x 1,1 5/8 standard tooth # 143 464 x 34 x 1,1 6/1 standard tooth # 144 464 x 34 x 1,1 8/12 standard tooth # 145 486 x 34 x 1,1 4/6 standard tooth # 146 486 x 34 x 1,1 5/8 standard tooth # 147 486 x 34 x 1,1 6/1 standard tooth # 148 486 x 34 x 1,1 8/12 standard tooth # 149

4713 Bi-Metal Band Saw Blades WIKUS MARATHON M 42 c Endless welded saw bands, tooth shape hook tooth, tooth tips with a high content of cobalt and molybdenum. Highest machining performance, long service life. Hook tooth for multi-purpose use. For cutting bundles or several layers of large workpiece dimensions For hardened steel up to a hardness of 45 HRC and non-ferrous metals. L x W x T Teeth Tooth shape 4713 27 x 27 x,9 4/6 hook tooth # 11 275 x 27 x,9 4/6 hook tooth # 12 2835 x 27 x,9 3/4 hook tooth # 13 2835 x 27 x,9 4/6 hook tooth # 14 289 x 27 x,9 3/4 hook tooth 15 289 x 27 x,9 4/6 hook tooth 16 39 x 27 x,9 3/4 hook tooth # 17 39 x 27 x,9 4/6 hook tooth # 18 328 x 27 x,9 3/4 hook tooth # 19 328 x 27 x,9 4/6 hook tooth 11 3375 x 27 x,9 3/4 hook tooth 111 3375 x 27 x,9 4/6 hook tooth # 112 366 x 27 x,9 2/3 hook tooth # 113 366 x 27 x,9 3/4 hook tooth 114 366 x 27 x,9 4/6 hook tooth 115 372 x 27 x,9 2/3 hook tooth # 118 377 x 27 x,9 3/4 hook tooth 116 377 x 27 x,9 4/6 hook tooth 117 383 x 27 x,9 2/3 hook tooth # 119 383 x 27 x,9 3/4 hook tooth 12 383 x 27 x,9 4/6 hook tooth # 121 355 x 34 x 1,1 3/4 hook tooth 122 372 x 34 x 1,1 4/6 hook tooth # 123 39 x 34 x 1,1 3/4 hook tooth # 124 41 x 34 x 1,1 2/3 hook tooth # 125 4713 L x W x T Teeth Tooth shape 4713 41 x 34 x 1,1 3/4 hook tooth 126 41 x 34 x 1,1 4/6 hook tooth # 127 4115 x 34 x 1,1 2/3 hook tooth # 128 4115 x 34 x 1,1 3/4 hook tooth # 129 4115 x 34 x 1,1 4/6 hook tooth # 13 457 x 34 x 1,1 2/3 hook tooth # 131 457 x 34 x 1,1 3/4 hook tooth # 132 464 x 34 x 1,1 2/3 hook tooth 133 464 x 34 x 1,1 3/4 hook tooth 134 486 x 34 x 1,1 2/3 hook tooth # 135 486 x 34 x 1,1 3/4 hook tooth # 136 493 x 34 x 1,1 3/4 hook tooth 137 5 x 34 x 1,1 2/3 hook tooth # 138 5334 x 34 x 1,1 2/3 hook tooth # 139 5334 x 34 x 1,1 3/4 hook tooth # 14 54 x 41 x 1,3 3/4 hook tooth # 141 58 x 41 x 1,3 2/3 hook tooth # 142 58 x 41 x 1,3 3/4 hook tooth # 143 63 x 41 x 1,3 2/3 hook tooth # 144 683 x 41 x 1,3 2/3 hook tooth # 145 7239 x 54 x 1,3 2/3 hook tooth # 146 72 x 54 x 1,6 1,4/2 hook tooth # 147 72 x 54 x 1,6 2/3 hook tooth # 148 8585 x 67 x 1,6 1,4/2 hook tooth # 149 4716 Carbide band saw blades WIKUS FUTURA c Endless welded saw bands, tooth shape trapezoid tooth. For horizontal and vertical bandsaw machines. Extreme running smoothness even with high cutting speeds for perfect machining performance. Division of the cutting channel into seven chip sections. For hardened steel up to a hardness of 62 HRC, zirconium, molybdenum, aluminium bronze, Ampco and titanium alloys. 4716 L x W x T Teeth Tooth shape 4716 355 x 27 x,9 3/4 trapezoid tooth # 11 383 x 27 x,9 3/4 trapezoid tooth # 12 355 x 34 x 1,1 2/3 trapezoid tooth # 13 4115 x 34 x 1,1 2/3 trapezoid tooth # 14 4115 x 34 x 1,1 3/4 trapezoid tooth # 15 4115 x 41 x 1,3 2/3 trapezoid tooth # 16 464 x 41 x 1,3 2/3 trapezoid tooth # 17 464 x 41 x 1,3 3/4 trapezoid tooth # 18 683 x 41 x 1,3 2/3 trapezoid tooth # 19 72 x 54 x 1,6 1,4/2 trapezoid tooth # 11 7675 x 54 x 1,6 1,4/2 trapezoid tooth # 111 Fax order hotline: +49 624 739-1217 4.21

Our new services brand for everything to do with your tools. The ComBee brand stands for innovation and the highest quality in the area of self-service machines. Our responsible technical consultants in our field service organisation would be pleased to advise you with regard to the versatile implementation possibilities in your company. www.combee.de