SHIPLINK TM to support your performance: cable solutions and services for safety and reliability

Symbols Temperature Admissible ambient temperature for continuous duty operation Weather Resistance to severe weather conditions Fire Performances Fire performance according to: «Flame retardant» IEC 6033- «Fire retardant» IEC 6033-3- (for category A) IEC 6033-3-3 (for category B) IEC 6033-3-4 (for category C) IEC 6033-3-5 (for category D) «Fire resistant» IEC 6033- IEC 6033- or Halogen Free Br Cl F Smoke-Corrosivity-Toxicity Smoke density, gases corrosivity and toxicity Flexibility Minimum Bending Radius MBR = n x outer diameter r Electro Magnetic Interference EMI Copyright April 03 - Nexans Water tight 3

Shipboard cables Generalities - Power cables 9 - Control & instrumentation cables 3 - Communication cables 4 - Fire performance 7 5 - Pulling & installation 0 6 - Electrical parameters 7 - Electrical parameters for instrumentation cables 6 8 - Nexans Services 8 Page Shipboard cables Cables Voltage Operating temperature Page Medium voltage cables MPRXCX & MPRXCX FLEXISHIP.8/3 (3.6) kv 90 C 3 MPRXCX 3.6/6 (7.) kv - 6/0 () kv 90 C 34 MEPRXCX 8.7/5 (7.5) kv - /0 (4) kv 90 C 36 MPRXCX FLEXISHIP 3.6/6 (7.) kv - 6/0 () kv - 90 C 38 MEPRXCX FLEXISHIP 8.7/5 (7.5) kv - /0 (4) kv 90 C 40 MMGSHXCHX & MMGSEHXCHX 6/0 () kv 90 C 4 MMGSHX & MMGSEHX 6/0 () kv - 8.7/5 (7.5) kv 90 C 44 E.T.I. Terminaison 6/0 () kv - 8.7/5 (7,5) kv 48 - /0 (4) kv Power & Control cables MPRX 0.6/ (.) kv 90 C 5 MPRXCX 0.6/ (.) kv 90 C 56 MPRX FLEXISHIP 0.6/ (.) kv 90 C 60 MPRXCX FLEXISHIP 0.6/ (.) kv 90 C 6 MPRX(ST)X 0.6/ (.) kv 90 C 64 MPRX 33 0.6/ (.) kv 90 C 66 MPRXCX 33 0.6/ (.) kv 90 C 68 MPRX(ST)X 33 0.6/ (.) kv 90 C 70 MPRX 33 FLEXISHIP 0.6/ (.) kv 90 C 7 MPRXCX 33 FLEXISHIP 0.6/ (.) kv 90 C 74 Instrumentation & Control cables MPRX 50/50 (300) V 90 C 78 MPRXCX 50/50 (300) V 90 C 80 TX (C) 50/50 (300) V 90 C 8 TX (I) 50/50 (300) V 90 C 84 TCX (C) 50/50 (300) V 90 C 86 TCX (I) 50/50 (300) V 90 C 88 TX (C) 33 50/50 (300) V 90 C 90 TX (I) 33 50/50 (300) V 90 C 9 TCX (C) 33 50/50 (300) V 90 C 94 TCX (I) 33 50/50 (300) V 90 C 96 4

Cables Voltage Temperature Page Communication cables COAX FLAMEX - RG serie 50 Ω / 75 Ω 70 C 00 COAX FLAMEX - KX serie 50 Ω / 75 Ω 70 C 0 PROFIBUS 50 Ω 85 C 04 CAN BUS CABLES 0 Ω 70 C 06 LAN SF/UTP Category 6 Cables 08 LAN F/UTP Category 5e Cables 0 LAN S/FTP Category 7 Cables LAN CABLING 4 LANmark LSZH 6 Optical Fiber cables 8 BREAKOUT CABLES 0 Specific Application cables MX Wiring Cables 0.6/ (.) kv 90 C 4 MPRXCX EMC & MPRXCX FLEXISHIP EMC 0.6/ (.) kv 90 C 6 MPRXCX FLEXISHIP EMC.8/3 (3.6) kv 90 C 6 MPRX CAB 300/500 V 90 C 8 MPRX F 0.6/ (.) kv 90 C 30 BMKHC (I) 50/50 (300) V 90 C 3 CCTV composite 34 Type approvals Nexans Shipboard cables are approved by certification bodies in accordance with their rules and regulations for classification of ships: DNV (Det Norge Veritas) GL (Germanischer Lloyd) LRS (Lloyd register of Shipping) BV (Bureau Veritas) ABS (American Bureau of Shipping) RINA (Registro Italiano Navale) For updated type approvals, please consult our web site: www.nexans.com/shipbuilding (a login is required) Copyright April 03 - Nexans 5

Designing and building modern vessels as: Cruise ships, LNG Tankers, Container ships, FPSOs, specialized and offshore support vessels, is a complex process. The perfect integration of electrical modules will need performing and easy to install electrical cables. Nexans has designed a groundbreaking range of cables which will bring advanced electrical and mechanical performances to shipyards, electrical installers and naval engineering and consultants. Nexans cables bring outstanding benefits and advantages as: Easy installation, enhanced flexibility, easy pulling, easy connecting & stripability, reduced size and weight. Outstanding performances: halogen free, extreme resistance to: Fire, paint, EMC, crush, cold and thermal. In addition, thanks to its customer oriented approach, Nexans has developped a very efficient logistic service and cable management able to serve the most stringent delivery time and requirements. 8

POWER CABLES GENERALITIES Shipboard cables manufactured by Nexans are designed for fixed applications on board of commercial or navy vessels. Depending on the mechanical risk exposition, various ranges are proposed: Un-armoured cables with MPRX designation Armoured cables with MPRXCX designation - Conductor: All conductors integrated in Nexans shipboard cables are strictly compliant with the International Electrical Committee IEC 608 Standard. Depending on the application, vessel manufacturers have to choose conductors flexibility, and also, eventually copper protection against corrosion or chemical attack by using tin coated copper. IEC 608 specifies different maximum electrical resistance values for each nominal cross section area, both in class or class 5 conductors, and in bare or tinned copper. In the table below, these values in Ohm/km are given for DC measurement (direct current) at the normative temperature of 0 C. Power copper conductors according to IEC 608 Class Class 5 Cross section (mm ) Number of wires DC Maximum Resistance at 0 C (Ohm/km) Bare copper Tinned copper Max. diameter of wires in conductor DC Maximum Resistance at 0 C (Ohm/km) Bare copper Tinned copper.5 7...5 7 7.4 7.56 4 7 4.6 4.70 6 7 3.08 3. 0 7.83.84 6 7.5.6 5 7 or 9 0.77 0.734 35 7 or 9 0.54 0.59 50 9 or 37 0.387 0.39 70 9 or 37-5 0.68 0.70 95 9 or 37-6 0.93 0.95 0 37 or 6 0.53 0.54 50 37 or 6 0.4 0.6 85 37 or 6 0.099 0.00 40 6 or 6 0.0754 0.076 300 6 or 6 0.060 0.0607 0.6 3.3 3.7 0.6 7.98 8. 0.3 4.95 5.09 0.3 3.30 3.39 0.4.9.95 0.4..4 0.4 0.780 0.795 0.4 0.554 0.565 0.4 0.386 0.393 0.5 0.7 0.77 0.5 0.06 0.0 0.5 0.6 0.64 0.5 0.9 0.3 0.5 0.06 0.08 0.5 0.080 0.087 0.5 0.064 0.0654 For different length, or other air ambient temperature, the electrical resistance can be calculated with the formula: Copyright April 03 - Nexans Rt (Ohm/km) R0 (Ohm/km) Kt Rt = R0 x L / Kt where Electrical resistance in DC at a temperature t in C for a length L (km). Maximum electrical resistance value in DC given in the IEC608 at 0 C. Correction temperature factor given in the following table and depending on the room air ambient temperature. 9

Correction factors according to IEC 608 IEC 608 standard provides electrical resistance of copper conductors at an ambient temperature of 0 C. For other temperatures, correction factors are applied as below: Temperature ( C) Kt 5.064 0.04 5.00 0.000 5 0.980 30 0.96 35 0.943 40 0.96 45 0.909 50 0.893 55 0.877 60 0.86 65 0.847 70 0.833 75 0.80 80 0.806 85 0.794 90 0.78 95 0.769 00 0.758 - Insulation: Nexans has selected Halogen Free XLPE (cross linked polyethylene) compound for all power LV and MV cables up to 6/0 kv, and Halogen Free EPR (ethylene propylene rubber) for MV cables with 8.7/5 kv or /0 kv voltages. All material characteristics: electrical, mechanical and chemical are complying with the requirements of IEC 6009-35. For fire resistant cables, Nexans has chosen the new INFIT TM technology HF 90 or S95 in IEC 6009-35 that brings many installation advantages, as easy stripping insulation. HF XLPE and HF EPR compounds can be used for a permanent conductor temperature of 90 C; that corresponds to a life time of more than 40 years (Arrhenius ageing curve). These cross linked compounds can also accept a 50 C temperature in case of short circuit. -3 Armour: On board, mechanical risk on cables is quite usual in unprotected spaces, it is the reason why most of them are armoured. As cable weight is important, and is aimed to be minimized, steel tapes or steel wires armour are not used, preference is given to metal braid. That is the best compromise between mechanical protection, weight and installation facility. For all ranges of shipboard cables, Nexans has chosen copper braid armour that also can be used as a screen and an electro magnetic protection. Generally, bare copper braid is used on the commercial vessels. Tinned copper braid armour is only required in offshore projects where hydrogen sulphide can corrode the bare copper. -4 Sheath: Outer sheath is the final protection of the cable. Depending on the cable environment, outer sheath compound must satisfy performances as extreme temperature, solar radiations, oil, grease and various aggressive substances. IEC 6009-359 standard specifies performance values to different tests for sheathing material families: SHF for thermoplastic compounds, and SHF for thermosetting compounds. Of course, these materials are halogen free, low smoke density, low gas toxicity and low gas acidity. For the main ranges of stocked products, Nexans has chosen its own SHF compound that offers a good compromise of performances (cold behaviour + oil drops resistance at ambient temperature). For permanent oil contact, SHF compound is recommended. 0

CONTROL & INSTRUMENTATION CABLES Shipboard cables manufactured by Nexans are designed for fixed applications for circuits rated at 50/50 V, and are complying with IEC 6009-376 standard. Multi-cores cables are mainly dedicated for control, and multi pairs, triples or quads are for instrumentation devices. When required, circuit integrity in fire is made by using fire resistant cables complying with IEC 6033 fire tests. Control and Instrumentation cables are proposed in versions: Un-armoured: MPRX /MPRX 33 for control or TX /TX 33 for instrumentation. Armoured: MPRXCX /MPRXCX 33 for control or TCX /TCX 33 for instrumentation. TX and TCX ranges are designed with individual screen over each unit (I) or collective screen over the assembly of units (C). - Conductor: Tinned or bare copper, class stranded conductors with 7 wires are generally required for control and instrumentation links. Nominal cross section areas are: 0.5 0.75.5 and.5 mm². Due to assembly length factor for large number of unit, electrical resistance are not strictly in accordance with IEC 608, but electrical resistance values are complying with IEC 6009-376 as indicated in the following table: Instrumentation and control conductors in accordance with IEC 6009-376 GENERALITIES Cross section (mm ) Number of wires Class Bare copper DC Maximum Resistance at 0 C (Ohm/km) Tinned copper 0.50 7 40.4 4.6 0.75 7 6.0 6.3.00 7 9. 9.3.50 7.8.9.50 7 7.86 8.0 - Insulation: As for the power cables, Nexans s choice is for XLPE compound that offers the best compromise in terms of mechanical and electrical properties. XLPE compound has also a low permittivity value about.3. For fire resistant cables, the new INFIT ttm technology (HF 90 compound in IEC 6009-35) has been chosen. -3 Cabling: For instrumentation range, in adjacent units, different cores lay lengths are selected, in order to reduce inductive effects and cross-talks. All units are assembled in concentric layers. Copyright April 03 - Nexans -4 Electrostatic Screen Individual (I) or/and Collective (C): Laminated aluminium bonded to polyester tape with a tinned drain wire is generally used as electrostatic screen with a minimum overlap of 5% of the tape width. Copper braid is also allowed to be used as screening as stated in IEC 6009-376. -5 Armour: As for power cables, armour is made of tinned or bare copper braid. For instrumentation TCX (C) range, the armour is also used to provide the function of a collective screen. -6 Sheath: SHF or SHF Sheathing compounds are in accordance with IEC 6009-359 standard.

3 COMMUNICATION CABLES Communication cables include Coaxial, Fieldbus, LAN copper pairs and optical fibres cables. 3- COAXIAL cables: Main characteristic of this family is Impedance that could be 50 Ohms or 75 Ohms. MIL-C-7 Coaxial cables are usually used for onboard high frequency data transmission (communication equipment, radar, and instrumentation) and also carry video signals for surveillance cameras. FLAMEX RG offers exceptional fire safety in single cable. A coaxial cable is often combined with various conductors in a compact hybrid cable for piloting and powering CCTV cameras. 3- FIELDBUS cables: These Halogen-Free Flame and Fire-Retardant cables are dedicated to maritime applications. They have fixed impedance and transmit an extremely precise digital signal to control all essential shipboard functions, like motors, rudder and hydraulic systems. Can Bus cable comes in a single or double pair; while Profibus cable is a single pair and both can be supplied with SHF or SHF outer sheath depending on specification. Adapted from the industrial plant environment, these high performance cables are fully sea resistant and can operate safely in temperatures from -0 C to +70 C. 3-3 LAN (Local Area Network) copper cables: Several categories (Cat 5, Cat 6 and Cat 7) cables designed in 4 pairs are dedicated for high frequency signal and high rate transmissions. 3-4 OPTICAL FIBRE cables: General Overview Optical fibers are mainly used to transmit information over long distances and with high bit rates. Their benefits are numerous: the signal transmitted on the fiber is not disturbed by any electromagnetic wave created by power cables or electric machines. It also provides more security, as these cables can be fully dielectric. Besides, they provide a weight and space saving due to their small diameter, only 50 µm. An optical fiber is made up of three main parts: the core, the cladding and the coating. In the center, the core is made of doped silica and is surrounded by the cladding, made of natural silica. The light signal propagates along the core and the signal is reflected on the surface between the core and the cladding. An acrylic coating, generally made of two layers, is protecting the sillica part against abrasion during installation. Coating Cladding Core

Different fiber types are available: Multimode fibers are used for Local Area Networks (LAN) where the network links can be up to,000 meters. Two standard sizes of core are offered: 6.5 µm and 50 µm (with better performances). Multimode fibers have a graded index profile to reduce the dispersion of the signal during the transmission. The high size of the core is interesting for easy connection and does not require high cost test equipment. Singlemode fibers are able to transmit over longer distances. The installation is more delicate as they have a smaller core of 9 µm. This implies more precise connectors and test equipment. GENERALITIES Multimode fibers { { Singlemode fiber 5 µm 5 µm 5 µm 6.5 µm 50 µm 9 µm 6.5/5 50/5 9/5 Copyright April 03 - Nexans 3

On a global network point of view, although the cost of multimode fiber is more important than the singlemode s, the complete system is more economic. Indeed Multimode fibers are used with cheap transmission components LED () or VCSEL () whilst Singlemode fiber operates with more expensive LASER. () LED: Light Emitting Diode () VCSEL: Vertical Cavity Surface Emitting Laser Optical fibers are used at specific wavelength. Multimodes fibers are mainly used at 850 nm and,300 nm and Singlemode are used at,30 nm and,550 nm. The attenuation performances are better at the higher bandwidth with consequently improved transmission performances. Optical fiber can be provided with different characteristics. Indeed the performance need for fiber in patch cord or fiber over one kilometer link are obviously different. The fiber choice is based on optical parameters such as attenuation, bandwidth performances and chromatic dispersion. Different international standards are available to describe the optical fiber characteristics: ITU G65 for Singlemode fiber and IEC 60793--0 for Multimode fibers are worldwide references. Photographer Flying Focus 4

Technical fibers properties Fiber types... E9/5... G50/5... G6.5/5 GENERALITIES Geometrical characteristics Core diameter 9.0 ± 0,5 µm 50 ± 3 µm 6.5 ± 3 µm Cladding diameter 5 ± µm Coating diameter 45 ± 0 µm Numeral aperture 0.00 ± 0.05 0.75 ± 0.05 Optical characteristics Attenuation: 850 nm.8 db/km 3.4 db/km 300 nm.0 db/km. db/km 550 nm 0.6 db/km Brandwidth at: 850 nm - 600MHz 00MHz 300 nm - 00MHz 600MHz Dispersion at: 30 nm < 3.5 ps/nm 550 nm < 8 ps/nm Index of reflaction (IOR) at: 850 nm.48.496 300 nm.477.49 30 nm.4677 550 nm.468 Copyright April 03 - Nexans 5

Optical fiber connectors Nexans are able to preassemble optical fibers with plugs, we can provide this service in our factory or on site. A fiber optic connector is a non permanent join between two fibers. Standard fiber connectors may be used, as e.g. ST, SC, FC and LC connectors ST Connector (standard) This type of connector is suitable for both multimode fiber and singlemode fiber. The ST connector and the bajonet-holder is the most popular used connector worldwide. STX Europe To achieve the best possible transfer of light signal between fibers, higher quality connector is required as E000 or MT-RJ that is used for fiber modem applications. E000 Connector An E000 connector is a special connector with high level attenuation coefficient. This connector is suitable for multimode fiber and singlemode fiber. Due to the code system, this connector is very user friendly and can also be fit as a single connector or duplex connector The built-in filler cap protects the ferrule against contamination. The filler cap open/close during the connector plug in/out. 6

4 FIRE PERFORMANCE Nexans Research Center has adapted a program of constant improvement for insulation and sheathing materials, and cable designs. Some developments ensure fire performance characteristics for the Nexans shipboard cables range as flame and fire retardancy, smoke and fumes emission, fire resistance integrity and cable recycling after life time. Nexans shipboard cables are fully withstanding the requirements of the following IEC standards: 4- Flame retardancy: IEC 6033- Test on a single vertical insulated wire or cable This simple test provides an adequate evaluation of the flame retardant characteristic of a single cable. Depending on the cable size (diameter and weight) a regulated flame is continuously applied for a calculated time to the cable. The test is passed if the cable has self extinguished and the burnt portion of the cable has not reached the top of the sample. 4- Fire retardancy: IEC 6033-3 Test on bunched wires or cables Cables, when installed, vertically or horizontally laid, bunched on cable trays, in conduit or pipes, are potential vectors for fire propagation. This test was developed to obtain a method to determine the fire propagation characteristic of a group of bunched cables fixed on a vertical 3.5 m ladder (see Part 0 apparatus). The fire propagation along a bunch of cables depends on: the volume of combustible exposed to fire the geometrical configuration of the cables installation (touching or spaced) the temperature at which it is possible to ignite any emitted gases from the cables the quantity of combustible gas released from the cables the volume of air passing through the cables installation Nexans provides fire retardant IEC6009 series shipboard cables meeting the requirements of the general standard Part 350 that specifies category in touching configuration in one or more layers. IEC 6033-3 standard indicates 5 categories depending on parameters: the volume of combustible material ( insulation, filler and sheaths) the duration of flame exposition ( 0 or 40 minutes) For specific and small cables (diameter < mm), fire test is according to the new category (5 previously D) test category that needs less cable quantity. Flame Retardant IEC 6033- GENERALITIES Copyright April 03 - Nexans Test category Volume of combustible (litres/meter) Time of flame application (min) (A F/R) 7 40 (A) 7 40 3 (B) 3.5 40 4 (C).5 0 5 (D) 0.5 0 Fire retardant test according to the IEC 6033-3- - Cables installed in group on a vertical ladder 7

4-3 Fire resistance: IEC 6033 Test of fire resistance integrity of cables In case of fire, some circuits must maintain the power supply for vital safety equipment as emergency lighting, alarm systems, fire pumps IEC 6033 standard determines the circuit integrity of a cable during and after a prolonged fire with different test equipments and test methods: flame at 750 C temperature during 90 minutes applied to a horizontal cable under the nominal voltage Part - apparatus and Part - procedure and requirements flame at 850 C temperature during 90 minutes with shocks on the ladder support applied to a cable under the nominal voltage Part - for cable diameter > 0 mm, Part - for cable diameter 0 mm for data cables Part 3 - procedure and requirement for optical fiber cables Part 5 - procedure and requirement For electrical cables, tests are passed if no breakdown occurs (no failure of the fuses). Nexans proposes a large range: power, control and instrumentation of fire resistant shipboard cables. To meet these requirements, Nexans offers the traditional technology with lapped mica tape + extruded XLPE insulation system; and has developed a specific INFIT TM technology with HF90 and S95 extruded compounds. This new insulation gives installation advantages: easier insulation stripping and secured connexions. Fire resistant test according to IEC 6033 Part & Fire resistant test according to IEC 6033 Part Fire resistant test according to IEC 6033 Part 8

4-4 Measurements of combustion gases: IEC 60754 Part & Part : this test permits the determination of the amount of halogen gas emitted during the combustion of the different polymeric compounds (insulation, filler, sheaths) taken from a cable. Part : this test determinates the degree of acidity of gases by measuring ph and conductivity. GENERALITIES 4-5 Smoke density: IEC 6034 (7 m 3 chamber) In case of fire; smoke emissions considerably reduce the visibility on board. Passenger evacuation has to be held in a very short time. Therefore materials used in ships should not spread a lot of opaque smoke. Nexans shipboard cables are designed to withstand the requirements of IEC 6034 based on the 7 m 3 test developed by the London Transport Executive Research Laboratory. This test permits to measure the opacity of smoke emitted from burning cables (light transmittance). Part : apparatus including light measurement, fire source, smoke mixing method and qualification procedure Part : procedure and requirements. Measurements test equipment of combustion gases according to the IEC 60754-/60754- Copyright April 03 - Nexans Measurement of smoke opacity - 7m 3 - Chamber 9

5 PULLING & INSTALLATION In order to reduce pulling and installation time, Nexans has designed a cable range which offers: time saving on connexions by easy sheath and insulation stripping reduced weight, diameter and volume easier drawing due to low friction coefficient of polyolefin outer sheath compound. Nexans decides to distinguish main cable circuits by different outer sheath colours: red for medium voltage cables (from.8/3 kv up to /0 kv) black for power and control cables rated 0.6/ kv grey for instrumentation and control cables rated 50/50 V orange for all types fire resistant cables blue for intrinsic circuit cables In order to avoid unwanted effects of electromagnetic interference (EMI) as far as possible, Nexans recommends to separate on different cable trays, power circuits from control, instrumentation or communication circuits. 5- Pulling The process of pulling electrical cables on board of marine vessels is relatively a usual procedure. Nevertheless, Nexans would suggest some following rules to avoid any cable degradation and damage. Prior to start, care must be taken to ensure that the pulling equipment directly attached to the cable is tightly fitted over the complete cable and not only to one cable element such as the outer sheath, armour or conductors. The maximum pulling force exerted on the cable must not exceed 50 N/mm² (of nominal cross section area of the conductors) whether the cable is being manually pulled or with a winch or other mechanical equipment. If the cable link is pre-cut before pulling, the cable has to be correctly coiled to avoid any over twist. Pre-cut cable ends, in waiting position before final installation and connexion must be protected. All cable runs must be smooth and clean or covered with a complementary protection to prevent any outer sheath damage. When several cables are pulled together, talcum is recommended to limit friction and abrasion between cables and to ease the pulling process with better cables sliding. Where cables have to be pulled perpendicularly to other cables already installed, it is advised to protect them to avoid abrasion damage. Cables have to be pulled with a slow and regular speed about 0 m/minute, and with a minimum outer temperature of -5 C. It is always necessary, to store cables in warmed premises at an ambient temperature of + 0 C for hours. A longer period might be necessary for large drums. 5- Installation Cables installation must be in accordance with certification Bodies rules, and also with IEC 6009-35 or IEC 689-4. Some recommendations are given as follow about: special precautions for single-core cables for A.C. wiring minimum bending radius parallel cable links solar to sun rays in open areas. 5-- Precautions for single-core cables: In order to reduce electro-dynamic forces when a short circuit appears, symmetric method for cable installation is recommended as is shown in the following table (L, L and L3 indicates the location of the respective phase conductor). See st template on opposite page. 5-- Minimum bending radius: To limit the stress (elongation/compression) on insulation and sheath materials when cable are bent, rules about minimum internal bending radius have to be respected: in fixed installations during pulling and installation Values for these MBR stated in IEC 6009-35 and IEC 689-4 are given in the following table. See nd template on opposite page. 0

Number of conductors per phase Number of single core cables Recommended cable positionning L L L3 L3 L L 6 or L L L3 L3 L L GENERALITIES L L L3 3 9 L L3 L L3 L L L L L3 L3 L L L3 L L L L L3 or 4 L3 L L L3 L L3 L L L L L3 L Cables Type up to.8/3 kv Minimum internal bending radius Unarmoured Cables Armoured Cables Cables with circular class conductors: outer diameter 5 mm 4D 6D outer diameter > 5 mm 6D 6D Cables with sector shaped class conductors 8D 8D FLEXISHIP cable with class 5 conductors 4D 5D (round or sector shaped conductors) Cables Type from 3.6/6 kv to /0 kv Single core cables - class conductors D - FLEXISHIP 0D 3 cores cables - class conductors 9D - FLEXISHIP 7.5D All these bending radius values must be multiplied by, during pulling and installation of the cables. 5--3 Parallel cables link: According to certification society rules, several cables can be installed in parallel if certain conditions are respected: cables type must be the same (same design) cables must be rated for the same temperature class cables must have the same nominal cross section areas conductor cross section area > 0 mm² cables must have equal lengths. Copyright April 03 - Nexans 5--4 Exposure to the sun in open areas: Cables with black sheaths are intended for direct UV exposure. Cables with other sheath colors are sensitive to UV without impact on the electrical functionality and the performances in terms of fire propagation and smoke emission. Nexans recommends to protect cables which are sensitive to UV by UV-proof hoods installed over those. When cables are installed in luminaries or lighting, specific protection of insulation and cables must be applied as required in IEC 60598.

6 ELECTRICAL PARAMETERS For power, low voltage and medium voltage cables, cross section nominal areas are calculated in taking into account several parameters as: permissible current carrying capacities voltage drop short circuit values 6- Permissible current carrying capacities: Permissible current carrying capacities are stated by the rules of the vessel approval authority and in line with IEC 6009-35 and IEC 6894-4 standards. These values are applicable for DC and AC with a nominal frequency of 50 Hz or 60Hz. For higher frequency, current ratings shall be calculated with appropriate method. First, these values depend on the temperature class of the cable, and mainly on the maximum service temperature suitable for the insulation compound. Nowadays, in shipbuilding industry, 90 C rated cables are mostly installed on board. Other important parameters are to be taken into account for the choice of the nominal cross section areas of conductors: ambient temperature mutual heating effect due to cables grouping short time duty solar radiation This catalogue gives only an extract of IEC 6009-35 standard that selected methods for the determination of current carrying capacities for continuous service. These methods are derived from experimental data and from IEC 6087 (Electric cables- Calculation of current rating). Method A: calculation with the formula I = A S m B S n where I is the current rating capacity (in Ampere). S is the nominal cross section area of conductor (in mm²). A and B are coefficients, m and n are exponents according to cable type and method of installation. This method allows for greater choice of use in different installation configurations (see IEC 6009-35 and/or IEC 60364-5-5). Method B: calculation with the formula I = A S 0.65 where I is the current rating capacity (in Ampere). S is the nominal cross section area of conductor (in mm²). A is a coefficient depending on the conductor temperature class, e.g. A = 8 for MPRX and MPRXCX cables. The following table gives current carrying capacities in continuous service for 85 C and 90 C rated cables for an ambient air temperature of 45 C Conductor temperature: 85 C Nominal cross-sectional area mm Current carrying capacity Single core (A) cores (A) 3 or 4 cores (A).5 8 5.5 8 4 0 4 38 3 7 6 49 4 34 0 67 57 47 6 9 77 64 5 0 0 84 35 48 6 04 50 84 56 9 70 8 94 60 95 76 35 93 0 39 7 3 50 367 3 57 85 48 355 93 40 49 48 344 300 565 480 396

Conductor temperature: 90 C Nominal cross-sectional area mm Current carrying capacity Single core (A) cores (A) 3 or 4 cores (A).5 3 0 6.5 30 6 4 40 34 8 6 5 44 36 0 7 6 50 6 96 8 67 5 7 08 89 35 57 33 0 50 96 67 37 70 4 06 69 95 93 49 05 0 339 88 37 50 389 33 7 85 444 377 3 40 5 444 365 300 60 5 4 GENERALITIES 6-- Correction factor for different ambient temperature For other ambient air temperatures, correction factors have to be applied. Ambient temperature 35 C 40 C 45 C 50 C 55 C 60 C 65 C 70 C 75 C 80 C.0.05.00 0.94 0.88 0.8 0.74 0.67 0.58 0.47 6-- Correction factor for cables grouping When cables are installed in group, due to thermal effect, a correction factor 0.85 must be applied to reduce the current carrying capacities. Current ratings are recommended as being applicable to both unarmoured and armoured cables laid in free air as a group of 4 bunched together. These ratings may be considered applicable, without correction factors for a group of maximum 6 cables bunched together on cable trays, operating simultaneously at their full rated capacity, without free air circulation around them. When, it is to be expected that air temperature around cables could be higher than 45 C (due to heat transfer or in compartments where heat is produced) the current rating given in the table shall be reduced. 6--3 Correction factor for short time duty Correction factor could be also applied to maximise current ratings when cables are operating during a short period (less than hour). This factor depends on the cable time constant and also on the cable diameter. For more details, see IEC 6009-35. Copyright April 03 - Nexans 6--4 Correction factor for U.V. solar radiation Nexans recommends shielding cables from direct solar exposition. For cables with black or grey sheath, in case of solar radiation, a correction factors must be applied to the current carrying capacities given in the table : 0.8 for black colour of outer sheath 0.9 for light colour of outer sheath (e.g. light grey) Cables with other colors are not intended for direct UV. 3

6- Voltage drop: Current carrying in an electrical link induces a voltage drop. This value is the difference between the measured voltages at both ends of the link. In general, accepted values (in percentage) are 3% for lighting and 5% for motors or other uses. Voltage drop depends on: type of current: direct current (DC) or alternative current (AC) in single or tri-phased systems length of the link : directly proportional carrying current (amperage) and power factor (cos phi) cable and conductor electrical parameters: electrical resistance and inductance. In direct current system: DU = L R I In single phased alternative current system: DU = L I (R cos j + Z sin j) In tri-phased alternative current system: DU = L I 3 (R cos j + Z Sin j) DU R L I where voltage drop (in Volts). electrical conductor resistance in operating temperature (in Ohm/km). cable length (in km). current rating value (in Ampere). Cos j power factor, if no details, power factor is cos j = 0.8 and sin j = 0.6. Z reactance (in Ohm/km). For a quick calculation, the following table gives the voltage drop for most of low voltage cables with XLPE (90 C temperature class) and for various values of cos j. Values are for a tri-phased system (3 or 4 conductor cable, or 3 single core cables). Cross-section area (mm ) cos j = cos j = 0.9 Voltage drop (V/ A x km) cos j = 0.8 cos j = 0.6.5 6.00 4.0.50 6.0.5 5.50 4.40.80 9.60 4 0.00 9.00 8.00 6.0 5 6.60 6.0 5.40 4.0 0 3.90 3.60 3.0.50 6.50.30.0.50 5.60.50.35.0 35.5.0.00 0.85 50 0.85 0.80 0.75 0.65 70 0.57 0.60 0.55 0.50 95 0.4 0.45 0.4 0.40 0 0.35 0.35 0.36 0.34 50 0.8 0.30 0.3 0.3 85 0.3 0.5 0.8 0.4 40 0.8 0. 0.6 0.3 300 0.4 0.8 0.4 0. 4

6-3 Short circuit values: Cables and their insulated conductors must withstand the thermal effect produced by the short circuit which can flow in the circuit. As the duration is low, normally less than 5 seconds, adiabatic heating in insulation compound is only considered. The short circuit current rating calculation is based on the difference of conductor temperature before and at the end of the short circuit. These temperatures are depending on the insulation compound, e.g. for XLPE, initial temperature is 90 C (maximum operating conductor temperature) and final max temperature is 50 C. Short circuit current ratings are also depending on the duration of the short circuit before the setting off the electrical protection (circuit breaker or fuse). The following table gives values for cables insulated with XLPE, HEPR, S95 and HF90 compounds as MPRX, MPRXCX, MPRX 33 and MPRXCX 33. GENERALITIES Cross sectional area (mm ) Short circuit current ratings (A) Time duration (s) 0.s 0.s 0.5s s.0.5.5 4 6 0 6 5 35 50 70 95 0 50 85 40 300 453 30 0 43 680 480 304 5 33 800 506 358 80 80 80 57 70 90 0 860 4 50 3 00 00 430 7 50 5 00 3 40 90 300 7 950 5 050 3 570 5 800 00 7 070 5 000 600 6 000 0 00 7 50 3 600 300 4 00 0 000 43 300 30 600 9 300 3 700 54 00 38 00 4 00 7 00 67 700 47 800 30 00 400 83 500 59 000 37 300 6 400 08 000 76 700 48 500 34 300 35 000 96 000 60 600 4 900 For other short circuit duration, the maximum short circuit rating is calculated with the formula: I sc = A/ t where I sc is the short circuit rating during t second. t is the short circuit duration. A is the short circuit rating for second. Copyright April 03 - Nexans 5

7 ELECTRICAL PARAMETERS FOR INSTRUMENTATION CABLES For instrumentation cables, main electrical parameters are: electrical resistance and loop resistance current ratings voltage drop mutual capacitance loop inductance and L/R ratio insulation resistance (conductors, screen, armour) All these values are given in the following table for Nexans TX and TCX range with bare copper conductor. Number of 0.5 mm 0.75 mm.5 mm pairs Electrical conductor resistance in DC at 0 C (Ohm/km) Loop resistance (Ohm/km) 40.4 6.0.8 80.8 5.0 5.6 Current carrying capacity (A) Voltage drop in DC (V/A.km) 4 p 8 4 > 4 p 4 6 7 5 39 6 Capacitance at khz Individual screen (nf/km) Capacitance at khz Collective screen (nf/km) Capacitance for 33 types with HF 90 compound Individual screen (nf/km) 8 8 9 p 63 6 69 4 p 53 5 56 7 p to 4 p 5 to 49 p 5 to 48 p 54 to 5 p - 00 5 Loop Inductance (mh/km) at khz 0.63 0.64 0.60 L/R ratio at 0 C Cores insulation resistance (M Ohm - km) Screen insulation resistance (M Ohm - km) Screen/Armour insulation resistance (M Ohm - km) 0.0078 0.03 0.034 > 000 > 000 > 800 > > > > 0.5 > 0.5 > 0.5 Permissible current carrying capacity is given for an ambient temperature of 45 C and for a maximum conductor temperature of 90 C. 6

An other important parameter for these instrumentation cables could be the screen efficiency and the transfer impedance value designated by Zt. Nexans has studied screening efficiency for TX and TCX range. Curves (transfer impedance related to frequency) have been established for various 7 pairs. Transfer impedance Value (Zt) according to the frequency (F) GENERALITIES Zt (mw/m) F (khz) Copyright April 03 - Nexans TX (C): (Unarmoured, collective screen) Electromagnetic screening of the TX (C) cable is simple electromagnetic surroundings. TX (I): (Unarmoured, individual screen) TX (I) is an excellent compromise between TX (C) and TCX (C) cables. and shows a medium protection in polluted TCX (C): (Armoured, collective screen) The TCX (C) cable shows a low transfer impedance in low frequency and an effective screening in high frequency. TCX (C) would be recommended in polluted electromagnetic surroundings. TCX (I): (Armoured, individual screen) This cable type shows an excellent protection in both low and high frequency runs. 7

A customized services program to help you to keep the lead Nexans, the world leader in the cable industry, draws on its vast experience to serve your special needs and enhance your performance. By responding to your operational concerns, expectations and requirements, the Nexans Service Program combines just the right cables with a tailored service package to generate immediate value for your activity. The Nexans service program provides you with solutions that are adapted both to your organization and goals. A Suite of services: Supply Chain - Engineering - Cable Systems - E-business To help you meet new challenges, Nexans proposes high value-added services, associated with a large range of cables. These services are a response to your overall procurement, production and marketing needs. Supply Chain Inventory management Our experts use high-performance analysis tools to carry out diagnostics and propose personalized solutions to speed up the flow and fluidity of your supply chain. Reduces costs, frees up warehouse space and simplifies project management. Custom-tailored packaging We deliver on special reels and use customized packaging with special protection (protective film wrap, lagging, hooping) and cross-docking to consolidate deliveries. Adapts to your operational constraints, facilitates rollout of new projects, and reduces waste. Cable Systems Ready to use Harnesses Shipboard harnesses integrates cables connections, boxes ready for fast installations on board your vessels. Nexans developped in partnership with a major player of electrical components a dedicated cabling solution for flexible, and quick installation of tour lighting systems. Engineering Technological consulting We optimize electrical, thermal and mechanical designs for shipboard and conduct life cycle analysis to assess environmental impact. - For major projects, a resident engineer oversees the project and provides maximum onsite support. Re-design to cost On-site experts identify solutions and technical alternatives, allowing you to make your cable purchase portfolio leaner and reduce total cost-of-ownership. Makes you more competitive by optimizing bills of materials, both in terms of process and performance. Innovation For OEMs, Nexans makes available R&D tools like numerical modeling, electron microscopy, laboratory testing and engineering expertise. Innovation accelerates time-to-market, optimizes performance, and lowers development costs. E-business Extranet Through personalized access, you can track orders/deliveries, create pre-selected catalogues, and consult inventory, and product availability, etc. Provides a secure electronic library of all technical, administrative and commercial documentation over a project s lifetime. 8

Application MPRXCX type is used on board of ships for fixed installations complying with IEC standards 6009-35. Thanks to its flexibility and low bending force, MPRXCX FLEXISHIP is recommended to be used in narrow space. MPRXCX type withstands IEC 6033-3- fire test on bunched cables and performs to the SOLAS requirements. MPRXCX & MPRXCX FLEXISHIP.8/3 (3.6) kv Max conductor temperature: 90 C Design. Conductor Stranded bare copper class or Flexible bare copper class 5. Insulation XLPE (cross linked polyethylene) 3. Inner covering Polyolefin 4. Armouring Bare copper braid 5. Outer sheath Polyolefin SHF Colour: red SHF on request 3 4 5 Marking NEXANS MPRXCX.8/3 kv «n» x «s» mm 90 C IEC 6033-3- «WW/YY» + Metric Marking Core Identification By colour: black - brown - grey Standards Construction & Design: IEC 608 IEC 6009-350 IEC 6009-353 Tests performances: IEC 6033- IEC 6033-3- IEC 60754-/60754- IEC 6034 Materials: IEC 6009-35 IEC 6009-359 Fire retardant IEC 6033-3- Flame retardant IEC 6033-- Br Cl F Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- -30 + 80 C EMI 3

MPRXCX -.8/3 (3.6) kv Cables (mm ) Permissible current rating in open air (A) Min. Outer diameter Nom. Max. Weight approx. (kg/km) x 5 7 5.0 5.9 7.5 500 x 35 57 6.0 6.9 8.5 60 x 50 96 7.5 8. 9.5 780 x 70 4 9.0 9.7.5 000 x 95 93.0.8 3.5 80 x 0 339.0 3. 5.0 540 x 50 389 4.0 4.8 6.5 860 x 85 444 5.5 6.7 8.5 30 x 40 5 8.5 9.8 3.0 830 x 300 60 30.5 3.8 34.0 3 40 3 x 5 89 8.0 9.0 3.0 60 3 x 35 0 30.0 3. 33.5 00 3 x 50 37 33.0 34.0 36.5 590 3 x 70 69 36.5 37.7 40.5 3 350 3 x 95 05 40.5 4. 45.0 4 400 3 x 0 37 44.0 45.8 49.0 5 360 3 x 50 73 47.5 49.0 5.0 6 40 MEDIUM VOLTAGE CABLES MPRXCX FLEXISHIP -.8/3 (3.6) kv Products on request Cables (mm ) Permissible current rating in open air (A) Min. Outer diameter Nom. Max. Weight approx. (kg/km) x 5 7 5.5 6.4 8.0 50 x 35 57 7.0 7.8 9.5 650 x 50 96 8.0 9.0 0.5 80 x 70 4 0.0 0.7.5 030 x 95 93.0 3. 5.0 340 x 0 339 3.5 4.5 6.5 590 x 50 389 6.0 7.0 9.0 950 x 85 444 7.5 8.8 3.0 30 x 40 5 3.5 3.8 35.0 960 x 300 60 3.5 34.0 36.5 3 530 3 x 5 89 9.0 30.0 3.0 690 3 x 35 0 3.5 33.6 36.0 80 3 x 50 37 34.5 36.0 38.5 730 3 x 70 69 38.5 39.9 4.5 3 530 3 x 95 05 44.0 45.6 48.5 4 660 3 x 0 37 47.0 48.6 5.0 5 570 3 x 50 73 5.0 5.9 56.5 6 790 Copyright April 03 - Nexans r Test Voltage Minimum bending radius Fixed installations Products on request 6.5 kv AC between cores 6 x outer diameter 33

MPRXCX Application MPRXCX Medium Voltage cable type is used on board of ships for fixed installations complying with IEC standards 6009-35. Semi conductive layer over insulation is easily stripable. MPRXCX type withstands IEC 6033-3- fire test on bunched cables and performs to the SOLAS requirements. 3.6/6 (7.) kv 6/0 () kv Max conductor temperature: 90 C Design. Conductor Stranded bare copper class. Extruded semi-conductor 3. Insulation XLPE (cross linked polyethylene) 4. Screen Extruded semi-conductor Bare copper tape 5. Inner covering Polyolefin 6. Armouring Bare copper braid 7. Outer sheath Polyolefin SHF Colour: red SHF on request 3 4 5 6 7 Marking NEXANS MPRXCX «voltage» «n» x «s» mm 90 C IEC 6033-3- «WW/YY» + Metric Marking Core Identification By coloured thread: blue-white-red Standards Construction & Design: IEC 608 IEC 6009-350 IEC 6009-354 Tests performances: IEC 6033-3- IEC 6033- IEC 60754-/60754- IEC 6034 Materials: IEC 6009-35 IEC 6009-359 Fire retardant IEC 6033-3- Flame retardant IEC 6033- Br Cl F Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- -30 + 80 C EMI 34

MPRXCX 3.6/6 (7.) kv Cables (mm ) Permissible current rating in open air (A) Min. Outer diameter Nom. Max. Weight approx. (kg/km) x 5 7 9.0 0.0.5 750 x 35 57 0.5.5 3.0 900 x 50 96.5.5 4.0 080 x 70 4 3.5 4.3 6.0 330 x 95 93 5.0 6.0 8.0 630 x 0 339 7.0 8.5 30.5 950 x 50 389 8.5 30.0 3.0 300 3 x 5 89 38.0 39.5 4.5 700 3 x 35 0 40.5 4.0 45.0 3 60 3 x 50 37 4.5 44.5 47.0 3 800 3 x 70 69 46.5 48.0 5.5 4 750 3 x 95 05 50.5 5.5 56.0 5 850 3 x 0 37 54.5 56.5 60.0 6 950 3 x 50 73 58.0 60.0 63.5 8 00 MEDIUM VOLTAGE CABLES Products on request MPRXCX 6/0 () kv Cables (mm ) Permissible current rating in open air (A) Min. Outer diameter Nom. Max. Weight approx. (kg/km) x 5 7.0.8 4.5 80 x 35 57 3.0 4.0 6.0 960 x 50 96 4.0 4.9 6.5 0 x 70 4 6.0 7. 9.0 40 x 95 93 7.5 8.9 3.0 700 x 0 339 9.5 30.8 33.0 000 x 50 389 30.5 3.9 34.0 30 x 85 444 33.0 34. 36.5 750 x 40 5 35.5 37. 39.5 3 370 x 300 60 38.0 39.5 4.0 4 090 3 x 5 89 43.0 44.7 47.5 3 0 3 x 35 0 45.5 47. 50.5 3 60 3 x 50 37 47.5 49. 5.5 4 0 3 x 70 69 5.5 53.3 56.5 5 60 3 x 95 05 55.5 57.5 6.0 6 90 3 x 0 37 59.5 6.4 65.0 7 390 3 x 50 73 6.5 64.8 68.0 8 50 Products on request Test Voltage between conductor and screen in A.C. Copyright April 03 - Nexans r 3.6/6 (7.) kv Rated cables 6/0 () kv Rated cables Minimum bending radius for fixed installations Single core cable 3 cores cable.5 kv kv x outer diameter 9 x outer diameter 35

MEPRXCX Application MEPRXCX Medium Voltage cable type is used on board of ships for fixed installations complying with IEC standards 6009-35. Semi conductive layer over insulation is easily stripable. MEPRXCX type withstands IEC 6033-3- fire test on bunched cables and performs to the SOLAS requirements. 8.7/5 (7.5) kv /0 (4) kv Max conductor temperature: 90 C Design Conductor Stranded bare copper class. Extruded semi-conductor 3. Insulation EPR (ethylene propylene rubber) 4. Screen Extruded semi-conductor Bare copper tape 5. Inner covering Polyolefin (only for 3 cores) 6. Armouring Bare copper braid 7. Outer sheath Polyolefin SHF Colour: red SHF on request 3 4 5 6 7 Marking NEXANS MEPRXCX «voltage» «n» x «s» mm 90 C IEC 6033-3- «WW/YY» + Metric Marking Core Identification By coloured thread: blue-white-red Standards Construction & Design: IEC 608 IEC 6009-350 IEC 6009-354 Tests performances: IEC 6033-3- IEC 6033- IEC 60754-/60754- IEC 6034 Materials: IEC 6009-35 IEC 6009-359 Fire retardant IEC 6033-3- Flame retardant IEC 6033- Br Cl F Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- -30 + 80 C EMI 36

MEPRXCX - 8.7/5 (7.5) kv Cables (mm ) Permissible current rating in open air (A) Min. Outer diameter Nom. Max. Weight approx. (kg/km) x 5 7 5.0 6.0 8.0 030 x 35 57 7.0 8.3 30.5 80 x 50 96 8.0 9.3 3.5 380 x 70 4 3.0 3.0 34.5 640 x 95 93 33.0 34.0 36.5 970 x 0 339 34.5 36.0 38.5 30 x 50 389 36.5 38.0 40.5 670 x 85 444 38.5 40. 43.0 3 50 x 40 5 4.5 43. 46.0 3 840 x 300 60 44.5 46. 49.0 4 490 3 x 5 89 50.5 5.3 55.5 3 900 3 x 35 0 5.5 54.6 58.0 4 440 3 x 50 37 56.5 58.6 6.0 5 0 3 x 70 69 6.0 64.5 68.5 6 80 3 x 95 05 65.5 67.5 7.5 7 330 3 x 0 37 70.0 7.3 76.5 8 50 3 x 50 73 74.0 76.5 8.0 9 750 MEDIUM VOLTAGE CABLES MEPRXCX - /0 (4) kv Products on request Cables (mm ) Permissible current rating in open air (A) Min. Outer diameter Nom. Max. Weight approx. (kg/km) x 35 57 7.5 9.0 3.0 390 x 50 96 8.5 30.0 3.0 530 x 70 4 30.5 3.5 34.0 80 x 95 93 3.5 34.0 36.0 60 x 0 339 34.0 35.5 38.0 500 x 50 389 35.5 37.0 39.5 940 x 85 444 37.5 39.0 4.0 3 340 x 40 5 40.5 4.0 45.0 4 00 x 300 60 4.5 44.5 47.0 4 70 3 x 35 0 55.0 57.0 60.5 5 400 3 x 50 37 57.5 59.5 63.0 6 0 3 x 70 69 6.0 63.0 67.0 7 40 3 x 95 05 65.0 67.5 7.0 8 440 3 x 0 37 68.5 7.5 75.0 9. 660 3 x 50 73 7.0 74. 79.0 0 940 Products on request Copyright April 03 - Nexans r Test Voltage between conductor and screen in A.C. 8.7/5 (7.5) kv Rated cables 30.5 kv /0 (4) kv Rated cables 4 kv Minimum bending radius for fixed installations Single core cable x outer diameter 3 cores cable 9 x outer diameter 37

MPRXCX FLEXISHIP Application MPRXCX FLEXISHIP type is used on board of ships for fixed installations complying with IEC standards 6009-35. MPRXCX FLEXISHIP is recommended for installations in narrow space. MPRXCX FLEXISHIP type withstands IEC 6033-3- fire test on bunched cables and performs to the SOLAS requirements. 3.6/6 (7.) kv 6/0 () kv Max conductor temperature: 90 C Design. Conductor Flexible bare copper class 5. Extruded semi-conductor 3. Insulation XLPE or EPR (cross-linked polyethylene) 4. Screen Extruded semi-conductor Bare copper spinning 5. Inner covering Polyolefin 6. Armouring Bare copper braid 7. Outer sheath Polyolefin SHF Colour: red SHF on request 3 4 5 6 7 Marking NEXANS MPRXCX FLEXISHIP «voltage» «n» x «s» mm 90 C IEC 6033-3- «WW/YY» + Metric Marking Core Identification By coloured thread: blue-white-red Standards Construction & Design: IEC 608 IEC 6009-350 IEC 6009-354 Tests performances: IEC 6033-3- IEC 6033- IEC 60754-/60754- IEC 6034 Materials: IEC 6009-35 IEC 6009-359 Br Cl F EMI Fire retardant IEC 6033-3- Flame retardant IEC 6033- Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- Flexible -30 + 80 C 38

MPRXCX FLEXISHIP 3.6/6 (7.) kv Cables (mm ) Permissible current rating in open air (A) Min. Outer diameter Nom. Max. Weight approx. (kg/km) x 5 7 9.5 0.3.0 730 x 35 57 0.5.5 3.0 870 x 50 96.5.7 4.5 050 x 70 4 3.5 4.3 6.0 80 x 95 93 5.0 6. 8.0 580 x 0 339 7.5 8.5 30.5 90 x 50 389 8.5 9.9 3.0 30 x 85 444 30.5 3.5 33.5 60 x 40 5 33.5 35.0 37.5 3 80 x 300 60 36.5 37.8 40.5 4 00 3 x 5 89 39.5 40.8 43.5 780 3 x 35 0 4.5 4.9 46.0 3 40 3 x 50 37 44.0 45.5 48.5 3 870 3 x 70 69 48.0 49.5 5.5 4 80 3 x 95 05 5.5 53.4 57.0 5 870 3 x 0 37 56.0 57.8 6.0 7 00 3 x 50 73 59.0 6. 65.0 8 90 MEDIUM VOLTAGE CABLES MPRXCX FLEXISHIP 6/0 () kv Products on request Cables (mm ) Permissible current rating in open air (A) Min. Outer diameter Nom. Max. Weight approx. (kg/km) x 5 7.0 3. 5.0 840 x 35 57 4.0 4.8 6.5 00 x 50 96 5.0 6. 8.0 00 x 70 4 7.5 8.8 3.0 500 x 95 93 30.0 3. 33.5 790 x 0 339 3.0 33. 35.5 40 x 50 389 34.0 35.3 38.0 500 x 85 444 35.5 36.8 39.5 850 x 40 5 39.0 40.4 43.0 3 500 x 300 60 4.5 43. 46.0 4 30 3 x 5 89 44.0 45.7 49.0 3 40 3 x 35 0 47.0 48.9 5.0 3 730 3 x 50 37 50.5 5.3 55.5 4 470 3 x 70 69 55.5 57. 6.0 5 500 3 x 95 05 60.0 6.0 66.0 6 580 3 x 0 37 64.0 66.0 70.0 7 760 3 x 50 73 68.0 70.3 74.5 9 040 Products on request Copyright April 03 - Nexans r Test Voltage between conductor and screen in A.C. 3.6/6 (7.) kv Rated cables 6/0 () kv Rated cables Minimum bending radius for fixed installations Single core cable 3 cores cable.5 kv kv 9 x outer diameter 7.5 x outer diameter 39

MEPRXCX FLEXISHIP Application MEPRXCX FLEXISHIP type is used on board of ships for fixed installations complying with IEC standards 6009-35. MEPRXCX FLEXISHIP is recommended for installations in narrow space. MEPRXCX FLEXISHIP type withstands IEC 6033-3- fire test on bunched cables and performs to the SOLAS requirements. 8.7/5 (7.5) kv /0 (4) kv Max conductor temperature: 90 C Design. Conductor Flexible bare copper class 5. Extruded semi-conductor 3. Insulation EPR (Ethylene propylene rubber) 4. Screen Extruded semi-conductor Bare copper spinning 5. Inner covering Polyolefin 6. Armouring Bare copper braid 7. Outer sheath Polyolefin SHF Colour: red SHF on request 3 4 5 6 7 Marking NEXANS MEPRXCX FLEXISHIP «voltage» «n» x «s» mm 90 C IEC 6033-3- «WW/YY» + Metric Marking Core Identification By coloured thread: blue-white-red Standards Construction & Design: IEC 608 IEC 6009-350 IEC 6009-354 Tests performances: IEC 6033-3- IEC 6033- IEC 60754-/60754- IEC 6034 Materials: IEC 6009-35 IEC 6009-359 Br Cl F EMI Fire retardant IEC 6033-3- Flame retardant IEC 6033- Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- Flexible -30 + 80 C 40

MEPRXCX FLEXISHIP 8.7/5 (7.5) kv Cables (mm ) Permissible current rating in open air (A) Min. Outer diameter Nom. Max. Weight approx. (kg/km) x 5 7 5.0 6.0 8.0 030 x 35 57 7.0 8.3 30.5 80 x 50 96 8.0 9.3 3.5 380 x 70 4 3.0 3.0 34.5 640 x 95 93 33.0 34.0 36.5 970 x 0 339 34.5 36.0 38.5 30 x 50 389 36.5 38.0 40.5 670 x 85 444 38.5 40. 43.0 3 50 x 40 5 4.5 43. 46.0 3 840 x 300 60 44.5 46. 49.0 4 490 3 x 5 89 50.5 5.5 55.5 3 900 3 x 35 0 5.5 54.6 58.0 4 440 3 x 50 37 56.5 58.6 6.0 5 0 3 x 70 69 6.0 64.5 68.5 6 80 3 x 95 05 65.5 67.5 7.5 7 330 3 x 0 37 70.0 7.3 76.5 8 50 3 x 50 73 74.0 76.5 8.0 9 750 MEDIUM VOLTAGE CABLES MEPRXCX FLEXISHIP /0 (4) kv Cables (mm ) Permissible current rating in open air (A) Min. Outer diameter Nom. Max. Weight approx. (kg/km) x 35 57 9.0 30.3 3.5 390 x 50 96 30.0 3.3 33.5 530 x 70 4 33.0 34.5 37.0 80 x 95 93 35.0 36. 38.5 60 x 0 339 36.5 37.9 40.5 500 x 50 389 38.5 39.9 4.5 940 x 85 444 44.0 45.6 48.5 3 340 x 40 5 44.0 45.6 48.5 4 00 x 300 60 46.5 48. 5.0 4 70 3 x 35 0 57.5 59.3 63.0 5 400 3 x 50 37 6.0 6.9 66.5 6 0 3 x 70 69 66.5 68.7 73.0 7 40 3 x 95 05 70.0 7.3 76.5 8 440 3 x 0 37 74.0 76.6 8.0 9 600 3 x 50 73 78.0 80.7 85.5 0 940 Copyright April 03 - Nexans r Test Voltage between conductor and screen in A.C. 8.7/5 (7.5) kv Rated cables /0 (4) kv Rated cables Minimum bending radius for fixed installations Single core cable 3 cores cable 30.5 kv 4 kv 9 x outer diameter 7.5 x outer diameter 4

MMGSHXCHX & MMGSEHXCHX Application For fixed installations on ships and offshore-units. The cables meet the flame test requirements for bunched cables according to IEC 6033-3- and IEEE 45-8.3 and perform to the SOLAS requirements. 6/0 () kv Max conductor temperature: 90 C Design. Conductor Flexible tinned copper class 5. Semi-conductor Extruded 3. Insulation EPR (Ethylene Propylene Rubber) 4. Screen Extruded semi-conductor Tinned copper wires 5. Common covering (only for 3 cores) 6. Inner sheath Cross linked polymere 7. Armouring Tinned copper braid 8. Outer sheath Cross linked rubber SHF Colour: red 3 4 5 6 7 8 Marking NEXANS MMGSEHXCHX or MMGSHXCHX «n» x «s» / «Braid section» mm 6/0 kv 90 C IEC 6009-354 IEC 6033-3 «n»: number of cores «s»: cross section Core Identification Natural colour (beige) Standards Construction & Design : IEC 6009-354 Tests performances : IEC 6033-3- IEC 6033- IEC 60754-/60754- IEC 6034 Materials : IEC 6009-35 IEC 6009-359 Br Cl F EMI Fire retardant IEC 6033-3- Flame retardant IEC 6033- Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- Flexible -30 + 75 C 4

MMGSHXCHX 6/0 () kv - Single core Cables (mm ) Min. Outer diameter Nom. Max. Weight approx. (kg/km) x 50/6 8.5 3.0 3.0 30 x 70/6 30.0 3.0 33.0 580 x 95/6 33.0 35.0 37.0 890 x 0/6 34.0 36.0 38.0 50 x 50/6 35.0 37.0 39.0 600 x 85/5 36.0 38.0 40.0 950 x 40/5 40.0 4.0 44.0 3 550 x 300/5 43.0 45.0 47.0 4 00 MMGSEHXCHX 6/0 () kv - 3 cores Products on request MEDIUM VOLTAGE CABLES Cables (mm ) Min. Outer diameter Nom. Max. Weight approx. (kg/km) 3 x 5/6 48.0 50.0 5.0 3 400 3 x 35/6 5.0 53.0 55.0 4 050 3 x 50/6 55.0 57.0 59.0 4 700 3 x 70/6 58.0 60.0 6.0 5 650 3 x 95/6 64.0 66.0 68.0 6 900 3 x 0/6 68.0 70.0 7.0 8 000 Products on request r Test Voltage between conductor and screen in A.C. 3.6/6 (7.) kv Rated cables 6/0 () kv Rated cables Minimum bending radius for fixed installations.5 kv kv 6 x outer diameter Copyright April 03 - Nexans 43

MMGSHX & MMGSEHX Application For fixed installations on ships and offshore-units. The cables meet the flame test requirements for bunched cables according to IEC 6033-3-. 6/0 () kv 8.7/5 (7.5) kv Max conductor temperature: 90 C Design. Conductor Flexible tinned copper class 5. Semi-conductor Extruded 3. Insulation EPR (Ethylene Propylene Rubber) 4. Screen Extruded semi-conductor Tinned copper wires 5. Inner covering (only for 3 cores) 6. Outer sheath Cross linked rubber SHF Colour: red 3 4 5 6 Marking NEXANS MMGSEHX or MMGSHX «n» x «s» voltage 85 C IEC 6009-354 IEC 6033-3- «n»: number of cores «s»: cross section Core Identification Natural colour (beige) Standards Construction & Design : IEC 6009-354 IEC 6050 Tests performances : IEC 6033-3- IEC 6033- IEC 60754-/60754- IEC 6034 Materials : IEC 6009-35 IEC 6009-359 Br Cl F EMI Fire retardant IEC 6033-3- Flame retardant IEC 6033- Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- Flexible -30 + 75 C 44

MMGSHX 6/0 () kv - Single core Cables (mm ) Min. Outer diameter Nom. Max. Weight approx. (kg/km) x 70/6 4.0 5.5 7.0 300 x 95/6 6.0 7.5 9.0 600 x 0/6 8.0 9.5 3.0 800 x 50/6 9.0 30.5 3.0 400 x 85/5 3.5 33.0 34.5 800 x 40/5 34.0 35.5 37.0 3 300 x 300/5 36.5 38.0 39.5 3 700 MMGSEHX 6/0 () kv - 3 cores Cables (mm ) Min. Outer diameter Nom. Max. Products on request Weight approx. (kg/km) MEDIUM VOLTAGE CABLES 3 x 35/6 46.0 48.0 49.5 3 700 3 x 50/6 48.5 50.0 5.0 4 50 3 x 70/6 53.0 54.5 56.5 5 500 3 x 95/6 57.0 58.0 6.0 7 300 3 x 0/5 6.0 6.5 64.5 8 400 Products on request Copyright April 03 - Nexans 45

MMGSHX 8.7/5 (7.5) kv - Single core Cables (mm ) Min. Outer diameter Nom. Max. Weight approx. (kg/km) x 0/6 3.5 3.0 9.5 900 x 50/5 34.5 33.0 3.5 600 x 85/5 36.0 34.5 33.0 3 000 x 40/5 38.5 37.0 35.5 3 500 x 300/5 4.5 40.0 38.5 3 900 MMGSEHX 8.7/5 (7.5) kv - 3 cores Products on request Cables (mm ) Min. Outer diameter Nom. Max. Weight approx. (kg/km) 3 x 35/6 50.0 5.0 53.5 3 700 3 x 50/6 54.0 56.0 57.5 4 50 3 x 70/6 58.0 60.0 6.5 5 500 3 x 95/6 63.0 65.0 66.5 7 300 3 x 0/5 66.0 68.0 69.5 8 400 3 x 50/5 7.0 73.0 74.5 9 400 3 x 85/5 75.0 77.0 78.5 0 600 3 x 40/5 8.5 83.5 85.0 00 Products on request r Test Voltage between conductor and screen in A.C. 6/0 () kv Rated cables 8.7/5 (7.5) kv Rated cables Minimum bending radius for fixed installations Single core cable 3 cores cable kv 30.5 kv x outer diameter 6 x outer diameter 46

E.T.I. Application Terminations are designed to connect Medium Voltage cables to equipments such as transformers, alternators, motors.... 6/0 () kv 8.7/5 (7.5) kv /0 (4) kv Design Cable lug. Filler tape 3. Conductor Stranded bare copper Class - IEC 608 4. Heat-shrinkable tubing Anti tracking sheath 5. Heat-shrinkable tubing R.L.T Stress Control Tubing 6. Semi-conductor tape 7. Screen Copper tape: thickness = 0. mm 8. Holding tape Field-controlling copper wire binding ( mm ) 9. Heat-shrinkable trifurcating 0. Holding tape Field-controlling copper wire binding ( mm ). Armouring Bare copper braid. Cable outersheath Polyolefin Colour: black 3. Shrinkable insulating sheath Anti tracking sheath 4. Braid connection to earth 3 4 5 6 7 8 9 0 3 4 48

E.T.I. - Inner three-phase terminal Designation Voltage Cross-section (mm ) ETI - 0-6/0 6/0 () kv 6-0 ETI - 5-50/40 8.7/5 (7.5) kv 50-40 ETI - 0-50/50 /0 (4) kv 50-50 E.T.I. - Inner single-phase terminal Designation Voltage Cross-section (mm ) E3UI - 0 6/0 () kv 0 MEDIUM VOLTAGE CABLES ITK 4 MT 8.7/5 (7.5) kv 35-40 ITK 4 MT /0 (4) kv 50-50 For any further details, please refer to the corresponding installation instructions. Copyright April 03 - Nexans 49

Part 3 Power & control kv cables POWER & CONTROL KV CABLES Copyright April 03 - Nexans 5

MPRX Control & Power Application MPRX type is used on board of ships for fixed installations, not subject to mechanical risk complying with IEC standards 6009-35. MPRX type withstands IEC 6033-3- fire test on bunched cables and performs to the SOLAS requirements. 0.6/ (.) kv Design. Conductor Stranded bare copper class. Insulation XLPE (cross linked polyethylene) 3. Outer sheath (Filler if necessary) Polyolefin SHF Colour: black SHF on request Max conductor temperature: 90 C 3 Marking NEXANS MPRX 0.6/ kv «n» x «s» mm 90 C IEC 6033-3- «WW/YY» * * + metric marking Core Identification core: black cores: brown-blue 3 x: brown-black-grey 3 G: brown-blue-green/yellow 4 x: brown-black-grey-blue 4 G: brown-black-grey-green/yellow 5 G: brown-black-grey-green/yellow-blue 5 x: white with printed numbers > 5 cores n x : white with printed numbers n G : white with printed numbers + green/yellow earth core Standards Construction & Design : IEC 608 IEC 6009-350 IEC 6009-353 Tests performances IEC 6033-3- IEC 6033- IEC 60754-/60754- IEC 6034 Materials IEC 6009-35 IEC 6009-359 Br Cl F Fire retardant IEC 6033-3- Flame retardant IEC 6033-- Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- -30 + 80 C 5

MPRX 0.6/ (.) kv - Power Cables (mm ) Permissible current rating in open air (A) Min. Outer diameter Nom. Max. Weight approx. (kg/km) x.5 3 4.6 4.9 5.6 40 x.5 30 5.0 5.4 6. 50 x 4 40 5.5 6.0 6.8 60 x 6 5 5.8 6.3 7. 80 x 0 7 6.6 7. 8.0 30 x 6 96 7.6 8. 9. 80 x 5 7 9.6 0..5 80 x 35 57 0.5..5 380 x 50 96.5.4 3.5 490 x 70 4 3.5 4.5 6.0 700 x 95 93 5.5 6. 7.5 940 x 0 339 7.0 8.0 9.5 80 x 50 389 9.0 0.0.5 480 x 85 444.0. 4.0 80 x 40 5 4.0 5.0 7.0 360 x 300 60 6.0 7.4 9.5 930 x.5 0 7.0 8. 8.8 80 x.5 6 8.0 9. 0.0 00 x 4 34 9.6 0.4.5 40 x 6 44 0.0.0.6 00 x 0 6.0.8 4.9 30 x 6 8 4.0 5. 6.7 460 x 5 08 7.5 8.8 0.5 700 POWER & CONTROL KV CABLES 3 x.5 / 3 G.5 6 7.5 8.7 9. 00 3 x.5 / 3 G.5 9.0 9.7.0 40 3 x 4 8 0.0.0.0 90 3 x 6 36.0.9 3.3 60 3 x 0 50.5 3.6 5.8 390 3 x 6 67 5.0 6. 7.7 580 3 x 5 89 9.0 0.0.5 940 3x35 S9 0 8.8 0..3 30 3x50 S37 37.0.3 3.5 550 3x70 S5 69 4.4 5.7 6.9 0 3x95 S6 05 8.6 9.9 3. 3 050 3x0 S6 37 3.3 3.6 33.8 3 700 S : sector shaped conductor. Copyright April 03 - Nexans 53

MPRX 0.6/ (.) kv - Power Cables (mm ) Permissible current rating in open air (A) Min. Outer diameter Nom. Max. Weight approx. (kg/km) 4 x.5 / 4 G.5 6 8.8 9. 0.5 0 4 x.5 / 4 G.5 0.0 0.4.5 70 4 x 4 / 4 G 4 8.5.9 3.5 50 4 x 6 / 4 G 6 36.0.8 4.0 330 4 x 0 / 4 G 0 50 4.0 4.9 6.5 500 4 x 6 / 4 G 6 67 7.0 8.0 9.5 770 4 x 5 / 4 G 5 89.0.3 4.0 80 4 x 35 S 9 0 4.0 3.7 4.9 500 4 x 50 S 37 37 5. 6.4 7.6 00 5 x.5 / 5 G.5 6 9.6 0.5.5 60 5 x.5 / 5 G.5 0.5.4.5 00 5 G 4 8.5 3. 4.5 30 5 G 6 36 3.5 4. 5.5 40 5 G 0 50 5.5 6.4 8.0 630 MPRX 0.6/ (.) kv - Control Cables (mm ) Permissible current rating in open air (A) Min. Outer diameter Nom. Max. Weight approx. (kg/km) 7 x.5 0.5.4.5 00 0 x.5 0 3.3 4. 4.8 60 x.5 0 4.0 5.3 6.5 330 4 x.5 0 4.9 5.7 6.4 350 6 x.5 9 5.7 6.5 7. 400 9 x.5 9 6.5 7.6 9.0 500 4 x.5 8 9.5 0.7.5 630 7 x.5 8 0.0. 3.0 700 37 x.5 7 3.0 4.6 6.0 930 7 x.5 6.0.8 4.0 80 x.5 3 5.5 6.9 8.5 460 9 x.5 8.5 0.0.5 690 4 x.5 0.0 3.8 5.5 880 7 x.5 0 3.0 4.5 6.5 970 37 x.5 9 5.5 7.6 9.5 300 MPRX cables are also manufactured with extruded inner covering, on request r Test Voltage Minimum bending radius for fixed installations cable diameter 5 mm cable diameter > 5 mm 3.5 kv AC between cores 4 x outer diameter 6 x outer diameter 54

MPRXCX Control & Power Application MPRXCX type is used on board of ships for fixed installations complying with IEC standards 6009-35. MPRXCX type withstands IEC 6033-3- fire test on bunched cables and performs to the SOLAS requirements. 0.6/ (.) kv Design. Conductor Stranded bare copper class. Insulation XLPE (cross linked polyethylene) 3. Inner covering (Filler if necessary) Lapped 4. Armouring Bare copper braid 5. Outer sheath Polyolefin SHF Colour: black SHF on request Max conductor temperature: 90 C 3 4 5 Marking NEXANS MPRXCX 0.6/ kv «n» x «s» mm 90 C IEC 6033-3- «WW/YY» * * + Metric Marking Core Identification core: black cores: brown-blue 3 x: brown-black-grey 3 G: brown-blue-green/yellow 4 x: brown-black-grey-blue 4 G: brown-black-grey-green/yellow 5 G: brown-black-grey-green/yellow-blue 5 x: white with printed numbers > 5: - n x: white with printed numbers - n G: white with printed numbers + green/yellow earth core Standards Construction & Design: IEC 608 IEC 6009-350 IEC 6009-353 Tests performances: IEC 6033-3- IEC 6033- IEC 60754-/60754- IEC 6034 Materials: IEC 6009-35 IEC 6009-359 Br Cl F EMI Fire retardant IEC 6033-3- Flame retardant IEC 6033- Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- -30 + 80 C 56

MPRXCX 0.6/ (.) kv - Power Cables (mm ) Permissible current rating in open air (A) Min. Outer diameter Nom. Max. Weight approx. (kg/km) x.5 3 5.8 6.3 7. 70 x.5 30 6. 6.7 7.6 80 x 4 40 6.6 7.3 8.4 00 x 6 5 7.0 7.6 8. 0 x 0 7 8.0 8.6 9.4 80 x 6 96 9.0 9.7 0.5 50 x 5 7 0.5.6.5 360 x 35 57.5.6 3.5 470 x 50 96 3.5 4.4 5.5 660 x 70 4 5.5 6.5 7.5 80 x 95 93 7.0 8.0 9.5 060 x 0 339 9.0 9.8.5 30 x 50 389 0.5.8 3.5 630 x 85 444.5 3.9 5.5 980 x 40 5 5.5 6.8 8.5 550 x 300 60 8.0 9. 3.5 3 40 x.5 0 8.3 9.5 0.5 30 x.5 6 9. 0.3.5 60 x 4 34 0.3.7 3.0 0 x 6 44.5.3 4.0 80 x 0 6 3.5 4.6 7.0 430 x 6 8 6.0 7.0 8.5 600 x 5 08 9.0 0.6.5 880 POWER & CONTROL KV CABLES 3 x.5 / 3 G.5 6 8.8 0.0.0 50 3 x.5/ 3 G.5 0.0 0.8.0 90 3 x 4 8.0.3 3.5 60 3 x 6 36.0 3.0 4.5 330 3 x 0 50 4.0 5.3 7.0 530 3 x 6 67 6.5 7.9 9.5 770 3 x 5 89 0.5.8 3.5 40 3 x 35 S9 0 0.5.0 3.5 30 3 x 50 S37 37 4.0 5.6 7.0 650 3 x 70 S5 69 7.0 9.0 30.5 370 3 x 95 S6 05 3.0 33.0 34.5 3 00 3 x 0 S6 37 34.0 35.5 37.5 4 050 S : sector shaped conductor. Copyright April 03 - Nexans 57

MPRXCX 0.6/ (.) kv Power Cables (mm ) Permissible current rating in open air (A) Min. Outer diameter Nom. Max. Weight approx. (kg/km) 4 x.5 / 4 G.5 6 9.8 0.7.0 80 4 x.5 / 4 G.5.0.9 3.0 40 4 x 4 8.5 3.4 5.0 30 4 x 6 36 3.5 4.7 6.0 450 4 x 0 50 5.5 6.9 8.5 640 4 x 6 67 8.5 9.7.5 930 4 x 5 89.5 4.0 6.0 380 4 x 35 S9 0 3.0 4.3 6.0 700 4 x 50 S37 37 6.0 7.3 9.0 300 4 x 70 S5 69 3.5 3.8 34.0 3 0 4 x 95 S6 05 35.5 36.8 39.0 4 300 5 x.5 / 5 G.5 6 0.5.8 3.0 30 5 x.5 / 5 G.5.0.9 4.5 90 5 G 4 8 4.5 5. 6.5 360 5 G 6 36 5.0 5.8 7.5 490 5 G 0 50 7.5 8. 0.0 70 MPRXCX 0.6/ (.) kv - Control Cables (mm ) Permissible current rating in open air (A) Min. Outer diameter Nom. Max. Weight approx. (kg/km) 7 x.5.5.7 4.0 70 0 x.5 4.5 5.3 7.5 380 x.5 0 5.5 7.0 8.0 460 4 x.5 9 6.5 7.3 9.0 470 6 x.5 9 7.5 8.5 0.0 530 9 x.5 9 8.0 9.8.0 650 4 x.5 8.0 3.0 4.5 760 7 x.5 8.5 3.4 4.5 870 37 x.5 7 4.0 6. 7.5 060 7 x.5 6 3.5 4.6 6.0 390 x.5 3 7.0 8.7 0.5 60 9 x.5 0.0.8 3.5 870 4 x.5 0 3.5 5.6 7.5 00 7 x.5 0 4.0 6. 8.0 00 37 x.5 9 7.0 9. 3.5 560 MPRXCX cables are also manufactured with extruded inner covering, on request. r Test Voltage Minimum bending radius for fixed installations 3.5 kv AC between cores 6 x outer diameter 58

MPRX FLEXISHIP Power Application MPRX FLEXISHIP type is used on board of ships for fixed installations, not subject to mechanical risk, complying with IEC standards 6009-35. MPRX FLEXISHIP is recommended for installations in narrow space, and in particular for connexions. Bending force is reduced by 30% to compare with MPRX cable. MPRX FLEXISHIP type withstands IEC 6033-3- fire test on bunched cables and performs to the SOLAS requirements. 0.6/ (.) kv Max conductor temperature: 90 C Design. Conductor Flexible bare copper class 5 sector-shaped for 3 cores with cross section from 70 mm to 50 mm. Insulation XLPE (cross linked polyethylene) 3. Outer sheath (Filler if necessary) Polyolefin SHF Colour: black SHF on request 3 Marking NEXANS MPRX FLEXISHIP 0.6/ kv «n» x «s» mm 90 C IEC 6033-3- «WW/YY» * * + Metric Marking Core Identification core: black cores: brown-blue 3 x: brown-black-grey 3 G: brown-blue-green/yellow 4 x: brown-black-grey-blue 4 G: brown-black-grey-green/yellow 5 G: brown-black-grey-green/yellow-blue Standards Construction & Design: IEC 608 IEC 6009-350 IEC 6009-353 Tests performances: IEC 6033-3- IEC 6033- IEC 60754-/60754- IEC 6034 Materials: IEC 6009-35 IEC 6009-359 Br Cl F Fire retardant IEC 6033-3- Flame retardant IEC 6033- Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- Flexible -30 + 80 C 60

MPRX FLEXISHIP 0.6/ (.) kv - Power Cables (mm ) Permissible current rating in open air (A) Min. Outer diameter Nom. Max. Weight approx. (kg/km) x 35 57.0.5.5 400 x 50 96.5 3.4 4.5 560 x 70 4 5.0 5.5 7.0 780 x 95 93 7.0 7.6 9.0 030 x 0 339 8.5 9.3.0 90 x 50 389.0.8 3.5 600 x 85 444.5 3.5 5.5 750 x 40 5 6.5 7.6 9.5 60 3 x 0 50 3.5 4. 5.5 350 3 x 6 67 7.0 7.6 9.0 590 3 x 5 89 0.0. 3.0 890 3 x 35 0.5 3. 5.0 30 3 x 50 37 6.5 7.5 9.5 690 3 x 70 S 69 6.5 7.7 30.0 0 3 x 95 S 05 30.5 3.8 34.0 870 3 x 0 S 37 33.5 35.0 37.5 3 660 3 x 50 S 73 38.0 39.4 4.0 4 570 4 x 0 / 4 G 0 50 5.0 5.8 7.5 600 4 x 6 / 4 G 6 67 8.5 9.5.5 930 4 x 5 / 4 G 5 89.5 3.5 5.5 40 4 x 35 / 4 G 35 0 5.0 6. 8.0 860 4 x 50 / 4 G 50 37 9.0 30.4 3.5 80 4 x 70 / 4 G 70 69 33.5 34.9 37.5 3 00 Copyright April 03 - Nexans POWER & CONTROL KV CABLES S : sector shaped conductor. Test Voltage 3.5 kv AC between cores r Minimum bending radius for fixed installations 4 x outer diameter 6

MPRXCX FLEXISHIP Power Application MPRXCX FLEXISHIP type is used on board of ships for fixed installations complying with IEC standards 6009-35. MPRXCX FLEXISHIP is recommended for installations in narrow space, in particular for connexions. Bending force is reduced by 30% compared to MPRXCX cable. MPRXCX FLEXISHIP type withstands IEC 6033-3- fire test on bunched cables and performs to the SOLAS requirements. 0.6/ (.) kv Max conductor temperature: 90 C Design. Conductor Flexible bare copper class 5 sector-shaped for 3 cores with cross section from 70 mm to 50 mm. Insulation XLPE (cross linked polyethylene) 3. Inner covering (Filler if necessary) Lapped 4. Armouring Bare copper braid 5. Outer sheath Polyolefin SHF Colour: black SHF on request 3 4 5 Marking NEXANS MPRXCX FLEXISHIP 0.6/ kv «n» x «s» mm 90 C IEC 6033-3- «WW/YY» * * + Metric Marking Core Identification core: black cores: brown-blue 3 x: brown-black-grey 3 G: brown-blue-green/yellow 4 x: brown-black-grey-blue 4 G: brown-black-grey-green/yellow 5 G: brown-black-grey-green/yellow-blue Standards Construction & Design: IEC 608 IEC 6009-350 IEC 6009-353 Tests performances: IEC 6033-3- IEC 6033- IEC 60754-/60754- IEC 6034 Materials: IEC 6009-35 IEC 6009-359 Fire retardant Flame retardant IEC 6033-3- IEC 6033- Br Cl F Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- Flexible -30 + 80 C EMI 6

MPRXCX FLEXISHIP 0.6/ (.) kv - Power Cables (mm ) Permissible current rating in open air (A) Min. Outer diameter Nom. Max. Weight approx. (kg/km) x 35 57.5 3.0 4.5 480 x 50 96 4.5 5.4 7.0 680 x 70 4 6.5 7.5 9.0 870 x 95 93 8.5 9..0 090 x 0 339 0.5.3 3.0 340 x 50 389 3.0 3.8 5.5 660 x 85 444 4.0 5.5 7.5 990 x 40 5 8.5 9.6 3.5 50 3 x 0 50 5.5 6.0 7.5 530 3 x 6 67 8.5 9.3.0 780 3 x 5 89.0.8 4.5 30 3 x 35 0 4.0 5.0 7.0 470 3 x 50 37 8.0 9.0 3.0 00 3 x 70 S 69 7.5 9.3 3.5 340 3 x 95 S 05 3.5 33.3 36.0 3 00 3 x 0 S 37 35.0 37.0 39.5 3 870 3 x 50 S 73 39.5 4.4 44.5 4 800 4 x 0 / 4 G 0 50 7.0 7.6 9.0 640 4 x 6 / 4 G 6 67 0.5.3 3.0 970 4 x 5 / 4 G 5 89 4.0 5. 7.0 40 4 x 35 / 4 G 35 0 6.5 7.6 9.5 80 4 x 50 / 4 G 50 37 3.0 3. 34.5 30 4 x 70 / 4 G 70 69 37.5 39. 4.0 3 30 POWER & CONTROL KV CABLES MPRXCX cables are also manufactured with extruded inner covering, on request. S : sector shaped conductor. Test Voltage 3.5 kv AC between cores r Minimum bending radius for fixed installations 5 x outer diameter Copyright April 03 - Nexans 63

MPRX (ST)X Application For fixed installation on ship and offshore-units. The cables meet the flame test requirements for bunched cables acc. to IEC 6033-3-. All cable materials are free of halogens. This design ensures that non corrosive and low toxic gases are emitted in case of fire. Therefore, these cables are especially suitable for the installation on Mega Yachts. 0.6/ kv Max conductor temperature: 90 C Design MPRX(ST)X XLPE insulated, electrostatic screening and polyolefin halogenfree outer sheath acc. To IEC 6009-353. Conductor Plain copper conductor Acc. To IEC 608, class (RM). Insulation XLPE acc. To IEC 6009-35 (cross linked polyethylene) 3. Inner covering Polyester tape and PP-tape 4. Collective screen Alu/Polyester tape with drain wire 5. Separator Polyester tape (optional) 6. Outer sheath Polyolefin type SHF Acc. To IEC 6009-359 black 4 6 Marking NEXANS MPRX(ST)X "n" x "s"mm 0,6 / kv 90 IEC 6033-3- Cat. Year * * Core Identification Cores with green/yellow 3 Green/yellow/blue/brown 4 Green/yellow/brown/black/brown 5 Green/yellow/brown/black/grey Up to 7 Green/yellow/white (with black numbers) Cores without green/yellow Blue/brown 3 Brown/black/grey 4 Blue/brown/black/grey 5 White cores (with black numbers) Up to 7 White cores (with black numbers) Br Cl F Fire retardant IEC 6033-3- Flame retardant IEC 6033- Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- -30 + 80 C 64

MPRX (ST)X 0.6/ kv Cables (mm ) Min. Outer diameter Max. Weight approx. (kg/km) core cables x.5 7.0 9.5 80 x.5 8.0 0.5 05 3 core cables 3 x.5 8.0 0.5 00 3 x.5 9.0.5 40 4 core cables 4 x.5 8.5.0 30 4 x.5 0.0.5 80 Multicore cables 5 x.5 9.5.0 65 7 x.5 0.5 3.0 05 0 x.5 3.5 6.0 90 x.5 4.0 7.0 330 4 x.5 4.9 6.4 360 9 x.5 6.5 9.5 500 4 x.5 9.5.0 600 7 x.5 0.0 3.0 700 5 x.5 0.5 3.0 5 7 x.5.0 4.0 80 0 x.5 4.5 6.0 40 x.5 5.5 6.9 480 9 x.5 8.5.5 700 7 x.5 3.0 6.5 980 POWER & CONTROL KV CABLES Further technical details Rated voltage (AC or DC): Max. voltage in DC-systems: U /U= 0,6/ kv 4 Green/yellow/brown/black/brown,8 kv conductor/conductor or 0,9 kv conductor/earth Max. rated conductor temperature: normal operation : 85 C / short circuit: 50 C Lowest installation temperature: 0 C Lowest temperature for fixed installation: -35 C Minimum internal bending radius: For overall diameter of cable <5 mm: 4 x overall cable diameter For overall diameter of cable >5 mm: 6 x overall cable diameter Current rating for continuous operation: See IEC 6009-35 Further hinds for cable installation: See IEC 6009-35 Copyright April 03 - Nexans 65

MPRX 33 Control & Power Application MPRX 33 type is used on board of ships for fixed installations, not subject to mechanical risk complying with IEC standards 6009-35 in safety circuits, where fire resistance is required. MPRX 33 type meets the IEC 6033- and also IEC 6033- or fire resistant performances during 90 minutes, withstands IEC 6033-3- fire test on bunched cables and performs to the SOLAS requirements. 0.6/ (.) kv Max conductor temperature: 90 C Design. Conductor Stranded bare copper class. Insulation Cross section.5 -.5-4 mm : Special Fire Resistant HF 90 Halogen Free Compound Cross section 6mm : silicone rubber S95 3. Outer Sheath (Filler if necessary) Polyolefin SHF Colour: orange SHF on request 3 Marking NEXANS MPRX 33 0.6/kV «n» x «s» mm 90 C IEC 6033-3- «WW/YY» * * + Metric Marking Core Identification core: black cores: brown-blue 3 x: brown-black-grey 3 G: brown-blue-green/yellow 4 x: brown-black-grey-blue 4 G: brown-black-grey-green/yellow 5 G: brown-black-grey-green/yellow-blue 5 x: white with printed numbers 5: - n x: white with printed numbers - n G: white with printed numbers + green/yellow earth core Standards Construction & Design: IEC 608 IEC 6009-350 IEC 6009-353 Tests performances: IEC 6033- IEC 6033- or IEC 6033- IEC 6033-3- IEC 60754-/60754- IEC 6034 Materials: IEC 6009-35 IEC 6009-359 Br Cl F Fire resistant IEC 6033- IEC 6033- or Fire retardant IEC 6033-3- Flame retardant IEC 6033- Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- -30 + 80 C 66

MPRX 33 0.6/ (.) kv - Control & Power Cables (mm ) Permissible current rating in open air (A) Min. Outer diameter Nom. Max. Weight approx. (kg/km) x 5 7 0.0 0.4.5 30 x 35 57.0.4 3.5 40 x 50 96.0.8 5.0 560 x 70 4 4.0 4.8 7.5 780 x 95 93 6.5 7.5 9.5 030 x 0 339 9.0 9.6.5 90 x.5 0 7.6 8.0 9.0 70 x.5 6 8.6 9. 0.5 00 x 4 34 9.6 0.4.5 40 x 6 44.0.4 4.0 70 x 0 6 3.5 4.0 5.5 380 x 6 8 5.5 6.4 8.0 560 x 5 08 9.0 0.0.5 850 x 35 33.5. 4.0 0 x 50 67 4.5 5.4 7.5 50 3 x.5 6 8. 8.5 9.4 00 3 x.5 9.4 9.7.0 40 3 x 4 8 0.5.0.5 00 3 x 6 36.5 3. 4.5 330 3 x 0 50 4.5 5. 6.5 480 3 x 6 67 7.0 7.6 9.5 730 3 x 5 89 0.5.5 3.5 0 3 x 35 0 3.0 3.9 6.0 460 3 x 50 37 6.0 7. 9.0 000 POWER & CONTROL KV CABLES 4 x.5 6 9.0 9.4 0.5 30 4 x.5 0.0 0.6.0 80 4 x 4 8.5.3 3.5 60 4 x 6 36 4.0 4.6 6.0 40 4 x 0 50 6.0 6.6 8.0 60 4 x 6 67 8.5 9.4.0 930 4 x 5 89 3.0 3.9 6.0 40 4 x 35 0 5.5 6.7 9.0 880 5 x.5 4 9.8 0.3.5 70 7 x.5 0.5..5 0 x.5 0 4.0 4.9 6.5 350 9 x.5 9 7.0 7.6 9.0 50 7 x.5 8 0.0. 3.0 730 37 x.5 8 3.0 4.0 6.0 980 5 x.5 8.0.6 3.0 30 7 x.5 6.0.8 4.0 300 x.5 3 6.0 6.8 8.5 490 9 x.5 9.0 0.0.5 750 7 x.5 0 3.5 4.5 6.5 060 Copyright April 03 - Nexans r Test Voltage Minimum bending radius for fixed installations cable diameter 5 mm cable diameter > 5 mm 3.5 kv AC between cores 4 x outer diameter 6 x outer diameter 67

MPRXCX 33 Control & Power Application MPRXCX 33 type is used on board of ships for fixed installations complying with IEC standards 6009-35 in safety circuits, where fire resistance is required. MPRXCX 33 type meets the IEC 6033- and also IEC 6033- or fire characteristics during 90 minutes, withstands IEC 6033-3- fire test on bunched cables and performs to the SOLAS requirements. 0.6/ (.) kv Max conductor temperature: 90 C Design. Conductor Stranded bare copper class. Insulation Cross section.5 -.5-4 mm : Special Fire Resistant HF 90 Halogen Free Compound Cross section 6 mm : silicone rubber S95 3. Inner covering Extruded 4. Armouring Bare copper braid 5. Outer sheath Polyolefin SHF Colour: orange SHF on request 3 4 5 Marking NEXANS MPRXCX 33 0.6/ kv «n» x «s» mm 90 C IEC 6033-3- «WW/YY» * * + Metric Marking Core Identification core: black cores: brown-blue 3 x: brown-black-grey 3 G: brown-blue-green/yellow 4 x: brown-black-grey-blue 4 G: brown-black-grey-green/yellow 5 G: brown-black-grey-green/yellow-blue 5 cores: - n x: white with printed numbers - n G: white with printed numbers + green/yellow earth core Standards Construction & Design: IEC 608 IEC 6009-350 IEC 6009-353 Tests performances: IEC 6033- IEC 6033- or IEC 6033- IEC 6033-3- IEC 60754-/60754- IEC 6034 Materials: IEC 6009-35 IEC 6009-359 Fire resistant Flame retardant Fire retardant IEC 6033- IEC 6033- or IEC 6033- IEC 6033-3- Br Cl F Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- -30 + 80 C EMI 68

MPRXCX 33-0.6/ (.) kv - Control & Power Cables (mm ) Permissible current rating in open air (A) Min. Outer diameter Nom. Max. Weight approx. (kg/km) x 5 7.5 3.0 4.5 40 x 35 57.5 4.6 6.0 550 x 50 96 4.5 5.8 7.0 70 x 70 4 6.5 7.8 9.5 960 x 95 93 8.5 0.7.5 50 x 0 339 0.5.8 4.5 540 x.5 0 0.0 0.5.0 80 x.5 6.0.7 3.0 30 x 4 34.5.9 4.5 90 x 6 44 4.5 5. 6.5 400 x 0 6 5.0 6.6 8.0 570 x 6 8 7.5 9.0 0.5 770 x 5 08.0.8 4.5 30 x 35 33 4.0 5.0 7.0 40 x 50 67 6.5 8.0 30.0 860 3 x.5 6 0.5..5 0 3 x.5.5. 3.5 60 3 x 4 8 3.0 3.5 5.0 340 3 x 6 36 4.5 5.7 7.5 480 3 x 0 50 6.5 7.7 9.5 680 3 x 6 67 8.5 0.0.0 930 3 x 5 89.5 4. 6.0 380 3 x 35 0 5.0 6.4 8.5 770 3 x 50 37 9.0 30. 3.5 350 POWER & CONTROL KV CABLES 4 x.5 6.5. 3.5 50 4 x.5.5.9 4.5 300 4 x 4 8 3.5 4. 5.5 440 4 x 6 36 7.0 7.6 9.0 570 4 x 0 50 8.0 9..0 80 4 x 6 67 0.5. 4.0 60 4 x 5 89 6.0 7.3 9.5 770 4 x 35 0 8.5 9.7 3.0 0 5 x.5 6.0.8 4.0 80 7 x.5 3.5 4.3 5.5 370 x.5 0 7.0 7.9 9.5 570 9 x.5 9 0.0 0.7.5 790 7 x.5 8 3.5 4.4 6.5 00 37 x.5 7 6.5 7.3 9.5 380 5 x.5 3.0 3.9 5.5 340 7 x.5 6 5.0 5.8 7.5 480 x.5 3 9.5 0.3.0 780 9 x.5.5 3.4 5.5 070 7 x.5 0 7.0 7.9 30.0 500 Copyright April 03 - Nexans r Test Voltage Minimum bending radius for fixed installations 3.5 kv AC between cores 6 x outer diameter 69

MPRX (ST)X 33 Application For fixed installation on ship and offshore-units. The cables meet the flame test requirements for bunched cables acc. to IEC 6033-3. All cable materials are free of halogens. This design ensures that non corrosive and low toxic gases are emitted in case of fire. Therefore, these cables are especially suitable for the installation on Mega Yachts. 0.6/ (.) kv Max conductor temperature: 90 C Design MPRX(ST)X33 XLPE insulated, electrostatic screening and polyolefin halogenfree outer sheath acc. To IEC 6009-353. Conductor Plain copper conductor Acc. To IEC 608, class (RM). Insulation Fire protection barrier XLPE acc. To IEC 6009-35 (cross linked polyethylene) 3. Inner covering Polyester tape and PP-tape 4. Collective screen Alu/Polyester tape with drain wire 5. Separator Polyester tape (optional) 6. Outer sheath Polyolefin type SHF Acc. To IEC 6009-359 orange 4 6 Marking NEXANS MPRX(ST)X33 n x,5mm 0,6 / kv 90 IEC 6009-353 IEC 6033-3- Cat. Year * * IEC 6033- (or ) Year * * Core Identification Cores with green/yellow 3 Green/yellow-blue-brown 4 Green/yellow-brown-black-brown 5 Green/yellow-brown-black-grey Up to 7 Green/yellow-white (with black numbers) Cores without green/yellow Blue-brown 3 Brown-black-grey 4 Blue-brown-black-grey 5 White cores (with black numbers) Up to 7 White cores (with black numbers) Br Cl F Fire resistant IEC 6033- Fire retardant IEC 6033-3- Flame retardant IEC 6033- Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- -30 + 80 C 70

MPRX (ST)X 33 0.6/ (.) kv Cables (mm ) Min. Outer diameter Max. Weight approx. (kg/km) core cables x.5 7.0 9.5 80 x.5 8.0 0.5 05 3 core cables 3 x.5 8.0 0.5 00 3 x.5 9.0.5 40 4 core cables 4 x.5 8.5.0 30 4 x.5 0.0.5 80 Multicore cables 5 x.5 9.5.0 65 7 x.5 0.5 3.0 05 0 x.5 3.5 6.0 90 x.5 4.0 7.0 330 4 x.5 4.9 6.4 360 9 x.5 6.5 9.5 500 4 x.5 9.5.0 600 7 x.5 0.0 3.0 700 5 x.5 0.5 3.0 5 7 x.5.0 4.0 80 0 x.5 4.5 6.0 40 x.5 5.5 6.9 480 9 x.5 8.5.5 700 7 x.5 3.0 6.5 980 POWER & CONTROL KV CABLES Further technical details Rated voltage (AC or DC): Max. voltage in DC-systems: U /U= 0,6/ kv,8 kv conductor/conductor or 0,9 kv conductor/earth Max. rated conductor temperature: normal operation : 85 C / short circuit: 50 C Lowest installation temperature: 0 C Lowest temperature for fixed installation: -35 C Minimum internal bending radius: For overall diameter of cable <5 mm: 4 x overall cable diameter For overall diameter of cable >5 mm: 6 x overall cable diameter Current rating for continuous operation: See IEC 6009-35 Further hinds for cable installation: See IEC 6009-35 Copyright April 03 - Nexans 7

MPRX 33 FLEXISHIP Power Application MPRX 33 type is used on board of ships for fixed installations, not subject to mechanical risk complying with IEC standards 6009-35 in safety circuits, where fire resistance is required. MPRX 33 type meets the IEC 6033- and also IEC 6033- or fire resistant performances during 90 minutes, withstands IEC 6033-3- fire test on bunched cables and performs to the SOLAS requirements. 0.6/ (.) kv Max conductor temperature: 90 C Design. Conductor Flexible bare copper class 5. Insulation Silicone rubber S95 3. Outer Sheath Extruded filler (if necessary) Polyolefin SHF Colour: orange SHF on request 3 Marking NEXANS MPRX 33 FLEXISHIP 0.6/kV «n» x «s» mm 90 C IEC 6033-3- «WW/YY» * * + Metric Marking Core Identification core: black cores: brown-blue 3 x: brown-black-grey 3 G: brown-blue-green/yellow 4 x: brown-black-grey-blue 4 G: brown-black-grey-green/yellow 5 G: brown-black-grey-green/yellow-blue Standards Construction & Design: IEC 608 IEC 6009-350 IEC 6009-353 Tests performances: IEC 6033-, IEC 6033- or IEC 6033- IEC 6033-3- IEC 60754-/60754- IEC 6034 Materials: IEC 6009-35 IEC 6009-359 Br Cl F EMI Fire resistant IEC 6033- IEC 6033- or Flame retardant IEC 6033- Fire retardant IEC 6033-3- Halogen free IEC 60754- Low smoke IEC 6034 Flexible No toxicity No corrosivity IEC 60754- -30 + 80 C 7

MPRX 33 FLEXISHIP 0.6/ (.) kv - Power Cables (mm ) Permissible current rating in open air (A) Min. Outer diameter Nom. Max. Weight approx. (kg/km) x 35 57.5.3 3.5 400 x 50 96 3.5 4.0 5.5 580 x 70 4 5.5 6. 7.5 780 x 95 93 7.5 8. 0.0 060 x 0 339 9.0 9.9.5 350 x 50 389.5.4 4.5 640 x 85 444 3.5 4.6 6.5 00 x 40 5 7.5 8.4 30.5 560 x 35 33.0 3.0 5.0 40 x 50 67 6.5 7.4 9.5 600 3 x 35 0 4.0 4.8 7.0 380 3 x 50 37 8.0 8.9 3.0 900 3 x 70 69 3.0 33. 35.5 850 3 x 95 05 36.5 38. 4.0 3 790 3 x 0 37 40.0 4.5 44.5 4 680 4 x 35 0 6.5 7.7 30.0 90 4 x 50 37 3.5 3.5 35.0 670 4 x 70 69 35.5 37.0 39.5 3 60 POWER & CONTROL KV CABLES Test Voltage 3.5 kv AC between cores r Minimum bending radius for fixed installations 4 x outer diameter Copyright April 03 - Nexans 73

MPRXCX 33 FLEXISHIP Power Application MPRXCX 33 FLEXISHIP type is used on board of ships for fixed installations complying with IEC standards 6009-35 in safety circuits, where fire resistance is required. MPRXCX 33 FLEXISHIP type meets the IEC 6033- and also IEC 6033- or fire characteristics during 90 minutes, withstands IEC 6033-3- fire test on bunched cables and performs to the SOLAS requirements. 0.6/ (.) kv Max conductor temperature: 90 C Design. Conductor Flexible bare copper class 5. Insulation Silicone rubber S95 3. Inner covering Extruded 4. Armouring Bare copper braid 5. Outer sheath Polyolefin SHF Colour: orange SHF on request 3 4 5 Marking NEXANS MPRXCX 33 FLEXISHIP 0.6/ kv «n» x «s» mm 90 C IEC 6033-3- «WW/YY» * * + Metric Marking Core Identification core: black cores: brown-blue 3 x: brown-black-grey 3 G: brown-blue-green/yellow 4 x: brown-black-grey-blue 4 G: brown-black-grey-green/yellow 5 G: brown-black-grey-green/yellow-blue Standards Construction & Design: IEC 608 IEC 6009-350 IEC 6009-353 Tests performances: IEC 6033-/IEC 6033- or IEC 6033-/IEC 6033-3- IEC 60754-/60754- IEC 6034 Materials: IEC 6009-35 IEC 6009-359 Fire resistant Flame IEC 6033- retardant IEC 6033- or IEC 6033- Fire retardant IEC 6033-3- Br Cl F Halogen free IEC 60754- Low smoke IEC 6034 Flexible No toxicity No corrosivity IEC 60754- -30 + 80 C EMI 74

MPRXCX 33 FLEXISHIP 0.6/ (.) kv - Power Cables (mm ) Permissible current rating in open air (A) Min. Outer diameter Nom. Max. Weight approx. (kg/km) x 35 57 4.0 4.5 6.0 550 x 50 96 6.0 7.0 8.5 740 x 70 4 8.5 9. 0.5 00 x 95 93 0.5.4 3.0 90 x 0 339.0 3. 5.0 580 x 50 389 4.5 5.6 7.5 000 x 85 444 6.5 7.8 30.0 300 x 40 5 3.0 3.0 34.0 900 x 35 33 5.0 6. 8.0 490 x 50 67 9.5 30.6 33.0 030 3 x 35 0 7.0 8. 30.5 80 3 x 50 37 3.5 3.6 35.0 400 3 x 70 69 35.5 36.9 39.5 3 50 3 x 95 05 40.5 4. 45.0 4 30 3 x 0 37 44.5 46.0 49.0 5 330 4 x 35 0 9.5 30.8 33.0 30 4 x 50 37 34.5 36.0 38.5 3 80 4 x 70 69 39.5 4.0 44.0 4 80 POWER & CONTROL KV CABLES Test Voltage 3.5 kv AC between cores r Minimum bending radius for fixed installations 5 x outer diameter Copyright April 03 - Nexans 75

Part 4 Instrumentation & control 50 V cables Copyright April 03 - Nexans INSTRUMENTATION & CONTROL 50 V CABLES 77

MPRX Control Application MPRX type is used on board of ships for fixed installations not subject to mechanical risk complying with IEC standards 6009-35. MPRX type withstands IEC 6033-3- fire test on bunched cables and performs to the SOLAS requirements. All materials used to produce this cable are halogen free. This design ensures that non corrosive and low toxic gases are emitted in case of fire. Therefore, this cable type is especially designed for installations on passenger ships, as on other commercial vessels. 50/50 (300) V Max conductor temperature: 90 C Design. Conductor Stranded bare copper class cross section area : 0.75mm and mm 3. Outer Sheath (Filler if necessary) Polyolefin SHF Colour: grey SHF on request 3 3. Insulation XLPE (cross linked polyethylene) 3 Marking NEXANS MPRX 50/50 V «n» x «s» mm 90 C IEC 6033-3- «WW/YY» * * + Metric Marking Core Identification white with printed number Standards Construction & Design: IEC 6009-350 IEC 6009-376 Tests performances: IEC 6033- IEC 6033-3- IEC 60754-/60754- IEC 6034 Materials: IEC 6009-35 IEC 6009-359 Br Cl F Fire retardant IEC 6033-3- Flame retardant IEC 6033- Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- -30 + 80 C 78

MPRX 50/50 (300) V - Control Cables (mm ) Permissible current rating in open air (A) Min. Outer diameter Nom. Max. Weight approx. (kg/km) x 0.75 3 6.0 6. 7. 50 3 x 0.75 6. 6.5 7.4 60 5 x 0.75 7.4 7.7 8.6 80 7 x 0.75 8 8.0 8.3 9.4 00 x 0.75 7 0.5 0.9.0 70 9 x 0.75 6.5 3.0 4.5 50 7 x 0.75 5 5.0 5.6 7.0 350 37 x 0.75 5 7.0 7.6 9.0 470 x 5 6.4 6.6 7.6 60 3 x 3 6.6 7.0 7.8 70 5 x 3 7.8 8. 9. 00 7 x 9 8.8 9. 0.5 30 x 8.0.7 3.0 0 9 x 7 3.5 4.0 5.5 30 7 x 6 6.0 6.8 8.5 430 37 x 5 8.0 9.0 0.5 580 MPRX cables are also manufactured with extruded inner covering, on request r Test Voltage 3600V DC between cores Minimum bending radius in fixed installations 4 x outer diameter INSTRUMENTATION & CONTROL 50 V CABLES Copyright April 03 - Nexans 79

MPRXCX Control Application MPRXCX type is used on board of ships for fixed installations complying with IEC standards 6009-35. The good screening qualities of the braid also reduce radio interference and electrical influences to electronic installations. MPRXCX type withstands IEC 6033-3- fire test on bunched cables and performs to the SOLAS requirements. All materials used to produce this cable are halogen free. The design ensures that non corrosive and low toxic gases are emitted in case of fire. Therefore, this cable type is especially designed for installations on passenger ships, on Mega Yachts as on other commercial vessels. 50/50 (300) V Max conductor temperature: 90 C Design. Conductor Stranded bare copper class cross section area : 0.75mm and mm. Insulation XLPE (cross linked polyethylene) 4. Armouring Bare copper braid 5. Outer sheath Polyolefin SHF Colour: grey SHF on request 3 3 3 4 3. Inner covering (Filler if necessary) Lapped 5 Marking NEXANS MPRXCX 50/50 V «n» x «s» mm 90 C IEC 6033-3- «WW/YY» * * + Metric Marking Core Identification white with printed number Standards Construction & Design: IEC 6009-350 IEC 6009-376 Tests performances: IEC 6033-3- IEC 6033- IEC 60754-/60754- IEC 6034 Materials: IEC 6009-35 IEC 6009-359 Fire retardant IEC 6033-3- Flame retardant IEC 6033- Br Cl F Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- -30 + 80 C EMI 80

MPRXCX 50/50 (300) V - Control Cables (mm ) Permissible current rating in open air (A) Min. Outer diameter Nom. Max. Weight approx. (kg/km) x 0.75 3 6.8 7. 8. 80 3 x 0.75 7. 7.5 8.4 90 5 x 0.75 8.6 8.9 0.0 30 7 x 0.75 8 9. 9.8.0 50 x 0.75 7.5.4 3.5 30 9 x 0.75 6 4.0 4.6 6.0 30 7 x 0.75 5 6.5 7.3 9.0 460 37 x 0.75 5 8.0 9.3 0.5 590 x 5 7.6 7.9 8.6 90 3 x 3 8.0 8.3 9.0 00 5 x 3 9.4 9.7 0.5 50 7 x 9 0.0 0.4.5 80 x 8.5 3. 4.5 70 9 x 7 5.0 5.9 7.0 40 7 x 6 7.5 8.4 0.0 560 37 x 5 9.5 0.7.5 70 MPRXCX cables are also manufactured with extruded inner covering, on request. r Test Voltage 3600V DC between cores 800V DC between cores and armour Minimum bending radius in fixed installations 6 x outer diameter Copyright April 03 - Nexans INSTRUMENTATION & CONTROL 50 V CABLES 8

TX (C) Instrumentation Application TX (C) type is used on board of ships for fixed installations not subject to mechanical risk complying with IEC standards 6009-35. TX (C) type withstands IEC 6033-3- fire test on bunched cables and performs to the SOLAS requirements. All materials used to produce this cable are halogen free. The design ensures that non corrosive and low toxic gases are emitted in case of fire. Therefore, this cable type is especially designed for installations on passenger ships, on Mega Yachts as on other commercial vessels. 50/50 (300) V Max conductor temperature: 90 C Design. Conductor Stranded bare copper class 3. Collective screen Alu/Polyester tape with a tinned copper drain wire 3 3 3 3 3. Insulation XLPE (cross linked polyethylene) 4. Outer sheath Polyolefin SHF Colour: grey SHF on request 4 4 4 4 4 3 4 Marking NEXANS TX (C) 50/50 V «n» P or T «s» mm 90 C IEC 6033-3- «WW/YY» * * + Metric Marking Core Identification Pair: white/ blue with printed pair number and core number Triple: white/ blue/ red with printed triple number Standards Construction & Design: IEC 6009-350 IEC 6009-376 Tests performances: IEC 6033-3- IEC 6033- IEC 60754-/60754- IEC 6034 Materials: IEC 6009-35 IEC 6009-359 Fire retardant IEC 6033-3- Flame retardant IEC 6033- Br Cl F Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- -30 + 80 C EMI 8

TX (C) 50/50 (300) V - Instrumentation Cables (mm ) Min. Outer diameter Nom. Max. Weight approx. (kg/km) x x 0.5* 6.0 6.3 7. 60 4 x x 0.5 8.8 9. 0.5 00 7 x x 0.5 0.5 0.9.0 50 0 x x 0.5.0.8 4.0 0 4 x x 0.5 3.5 4.4 6.0 70 9 x x 0.5 6.0 6.7 8.5 350 4 x x 0.5 8.0 8.7 0.5 450 x x 0.75* 7.0 7.3 8. 80 4 x x 0.75 0.0 0.8.0 40 7 x x 0.75.5 3. 4.5 0 0 x x 0.75 5.0 5.6 7.0 30 4 x x 0.75 7.0 7.7 9.5 400 9 x x 0.75 9.5 0.4.0 50 4 x x 0.75.0.7 4.5 660 x 3 x 0.75 0.0 0.8.0 50 4 x 3 x 0.75.5. 3.5 90 7 x 3 x 0.75 4.5 5.4 7.0 30 0 x 3 x 0.75 7.0 7.9 9.5 440 x x.5* 8.6 8.9 0.0 30 4 x x.5.5 3.4 5.0 30 7 x x.5 5.5 6.4 8.0 370 0 x x.5 9.0 9.7.5 50 4 x x.5.5.4 4.5 690 9 x x.5 5.0 5.8 8.0 90 x 3 x.5.5 3.4 5.0 40 4 x 3 x.5 4.5 5.0 6.5 30.5 mm cables are manufactured on request. Test Voltage * pairs are assembled as a quad 3600V DC between cores of the same unit 800V DC between cores and screen INSTRUMENTATION & CONTROL 50 V CABLES r Minimum bending radius in fixed installations 4 x outer diameter Copyright April 03 - Nexans 83

TX (I) Instrumentation Application TX (I) type is used on board of ships for fixed installations not subject to mechanical risk complying with IEC standards 6009-35. TX (I) type withstands IEC 6033-3- fire test on bunched cables and performs to the SOLAS requirements. All materials used to produce this cable are halogen free. The design ensures that non corrosive and low toxic gases are emitted in case of fire. Therefore, this cable type is especially designed for installations on passenger ships, on Mega Yachts as on other commercial vessels. 50/50 (300) V Max conductor temperature: 90 C Design. Conductor Stranded bare copper class. Insulation XLPE (cross linked polyethylene) 4. Outer sheath Polyolefin SHF Colour: grey SHF on request 3 3. Individual screen Alu/Polyester tape with a tinned copper drain wire 4 Marking NEXANS TX (I) 50/50 V «n» P or T «s» mm 90 C IEC 6033-3- «WW/YY» * * + Metric Marking Core Identification Pair: white/ blue with printed pair number and core number Triple: white/ blue/ red with printed triple number Standards Construction & Design: IEC 6009-350 IEC 6009-376 Tests performances: IEC 6033-3- IEC 6033- IEC 60754-/60754- IEC 6034 Materials: IEC 6009-35 IEC 6009-359 Fire retardant IEC 6033-3- Flame retardant IEC 6033- Br Cl F Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- -30 + 80 C EMI 84

TX (I) 50/50 (300) V - Instrumentation Cables (mm ) Min. Outer diameter Nom. Max. Weight approx. (kg/km) x x 0.5 5.4 5.7 6.6 50 x x 0.5 8.0 8.3 9.4 90 4 x x 0.5 9.4 9.8.0 0 7 x x 0.5.0.7 3.0 90 0 x x 0.5 3.0 3.9 5.5 60 4 x x 0.5 4.5 5.4 7.0 340 9 x x 0.5 7.5 8. 0.0 460 4 x x 0.5 9.5 0..0 580 x 3 x 0.5 5.8 6.0 6.8 50 x x 0.75 6. 6.5 7.4 60 x x 0.75 9.4 9.8.0 30 4 x x 0.75.0.4.5 70 7 x x 0.75 3.0 3.9 5.5 60 0 x x 0.75 6.0 6.7 8.5 370 4 x x 0.75 8.0 8.8 0.5 490 9 x x 0.75 0.5.6 3.5 650 4 x x 0.75 3.5 4.3 6.5 840 x 3 x 0.75 6.4 6.8 7.8 70 x 3 x 0.75.0.4.5 60 4 x 3 x 0.75.0.7 4.0 0 7 x 3 x 0.75 5.5 6. 8.0 350 0 x 3 x 0.75 8.0 8.9 0.5 50 x x.5 7.4 7.7 8.6 90 x x.5.5.0 3.5 90 4 x x.5 3.5 4.0 5.5 70 7 x x.5 6.5 7.3 9.0 440 0 x x.5 9.5 0.6.5 60 4 x x.5.5 3.4 5.5 80 9 x x.5 6.0 7.0 9.0 00 x 3 x.5 7.8 8. 9. 00 x 3 x.5 3.5 4.0 5.5 60 4 x 3 x.5 5.0 5.6 7.0 350.5 mm cables are manufactured on request. INSTRUMENTATION & CONTROL 50 V CABLES Test Voltage 3600V DC between cores of the same unit 800V DC between cores and screen Minimum bending radius in fixed installations 4 x outer diameter Copyright April 03 - Nexans 85

TCX (C) Instrumentation Application TCX (C) type is used on board of ships for fixed installations complying with IEC standards 6009-35. TCX (C) type withstands IEC 6033-3- fire test on bunched cables and performs to the SOLAS requirements. All materials used to produce this cable are halogen free. The design ensures that non corrosive and low toxic gases are emitted in case of fire. Therefore, this cable type is especially designed for installations on passenger ships, on Mega Yachts as on other commercial vessels. 50/50 (300) V Max conductor temperature: 90 C Design. Conductor Stranded bare copper class. Insulation XLPE (cross linked polyethylene) 4. Armouring Bare copper braid. 5. Outer sheath Polyolefin SHF Colour: grey SHF on request 3 4 3. Inner covering Lapped polyester tape 5 Marking NEXANS TCX (C)* 50/50 V «n» P or T «s» mm 90 C IEC 6033-3- «WW/YY» * * + Metric Marking * except for pair and triple, the cable marking is TCX(I) Core Identification Pair: white/ blue with printed pair number and core number Triple: white/ blue/ red with printed triple number Standards Construction & Design: IEC 6009-350 IEC 6009-376 Tests performances: IEC 6033-3- IEC 6033- IEC 60754-/60754- IEC 6034 Materials: IEC 6009-35 IEC 6009-359 Fire retardant IEC 6033-3- Flame retardant IEC 6033- Br Cl F Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- -30 + 80 C EMI 86

TCX (C) 50/50 (300) V - Instrumentation Cables (mm ) Min. Outer diameter Nom. Max. Weight approx. (kg/km) x x 0.5 6.4 6.6 7.6 60 x x 0.5* 6.8 7. 8. 90 4 x x 0.5 9.6 0..5 50 7 x x 0.5.5.0 3.5 0 0 x x 0.5 3.5 4.4 6.0 30 4 x x 0.5 5.0 5.8 7.5 380 9 x x 0.5 7.5 8.3 0.0 490 4 x x 0.5 9.5 0.3.0 600 x 3 x 0.5 6.6 6.9 7.8 80 x x 0.75 7.0 7.4 8.4 90 x x 0.75* 7.8 8. 9. 0 4 x x 0.75.5.9 3.0 00 7 x x 0.75 4.0 4.7 5.5 80 0 X X 0.75 6.5 7. 9.0 440 4 x x 0.75 8.5 9..0 530 9 x x 0.75.0.8 3.5 670 4 x x 0.75 3.0 4. 6.0 830 x 3 x 0.75 7.4 7.7 8.6 00 x 3 x 0.75.0.7 3.0 00 4 x 3 x 0.75.5 3.0 4.5 50 7 x 3 x 0.75 6.0 6.8 8.5 40 0 x 3 x 0.75 8.5 9.5.0 580 x x.5 8. 8.6 9.6 0 x x.5* 9.4 9.8.0 70 4 x x.5 4.5 5.0 6.5 340 7 x x.5 7.0 8.0 9.5 490 0 x x.5 0.0. 3.0 680 4 x x.5 3.0 3.8 5.5 850 9 x x.5 6.0 7. 9.5 00 x 3 x.5 8.6 9.0 0.0 40 x 3 x.5 3.5 4.3 6.0 300 4 x 3 x.5 5.5 6.4 8.0 430 7 x 3 x.5 0.0 0.7.5 660.5 mm cables are manufactured on request.. TCX(C) cables are also manufactured with extruded inner covering, on request. * pairs are assembled as a quad INSTRUMENTATION & CONTROL 50 V CABLES Test Voltage 3600V DC between cores of the same unit 800V DC between cores and screen Copyright April 03 - Nexans r Minimum bending radius in fixed installations 6 x outer diameter 87

TCX (I) Instrumentation Application TCX (I) type is used on board of ships for fixed installations complying with IEC standards 6009-35. TCX (I) type withstands IEC 6033-3- fire test on bunched cables and performs to the SOLAS requirements. All materials used to produce this cable are halogen free. The design ensures that non corrosive and low toxic gases are emitted in case of fire. Therefore, this cable type is especially designed for installations on passenger ships, on Mega Yachts as on other commercial vessels. 50/50 (300) V Max conductor temperature: 90 C Design. Conductor Stranded bare copper class. Insulation XLPE (cross linked polyethylene) 3. Individual screen Alu/Polyester tape with a tinned copper drain wire 4. Inner covering Lapped polyester tape 5. Armouring Bare copper braid 6. Outer sheath Polyolefin SHF Colour: grey SHF on request 3 4 5 6 Marking NEXANS TCX (I) 50/50 V «n» P or T «s» mm 90 C IEC 6033-3- «WW/YY» * * + Metric Marking Core Identification Pair: white/ blue with printed pair number and core number Triple: white/ blue/ red with printed triple number Standards Construction & Design: IEC 6009-350 IEC 6009-376 Tests performances: IEC 6033-3- IEC 6033- IEC 60754-/60754- IEC 6034 Materials: IEC 6009-35 IEC 6009-359 Fire retardant IEC 6033-3- Flame retardant IEC 6033- Br Cl F Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- -30 + 80 C EMI 88

TCX (I) 50/50 (300) V - Instrumentation Cables (mm ) Min. Outer diameter Nom. Max. Weight approx. (kg/km) x x 0.5 9.0 9.4 0.5 40 4 x x 0.5 0.0 0.7.0 70 7 x x 0.5.0.8 4.0 50 0 x x 0.5 4.5 5.3 7.0 380 4 x x 0.5 6.0 7.0 8.5 470 9 x x 0.5 9.0 9.6.5 600 4 x x 0.5 0.5.6 3.5 740 x x 0.75 0.0 0.7.0 80 4 x x 0.75.0.5 4.0 30 7 x x 0.75 5.0 5.5 7.0 380 0 x x 0.75 7.5 8. 0.0 50 4 x x 0.75 9.5 0.4.0 650 9 x x 0.75.5 3. 5.0 830 4 x x 0.75 4.5 5.7 7.5 00 x 3 x 0.75.0.5 4.0 30 4 x 3 x 0.75 3.0 3.6 5.0 90 7 x 3 x 0.75 7.0 7.6 9.5 500 0 x 3 x 0.75 9.5 0.5.5 700 x x.5.5.9 4.5 60 4 x x.5 5.0 5.6 7.0 380 7 x x.5 8.0 8.7 0.5 570 0 x x.5.5. 4.0 80 4 x x.5 4.0 5.0 7.0 00 9 x x.5 7.5 8.6 3.0 30 x 3 x.5 5.0 5.6 7.0 380 4 x 3 x.5 6.5 7. 9.0 490.5 mm cables are manufactured on request.. TCX(I) cables are also manufactured with extruded inner covering, on request. Test Voltage 3600V DC between cores of the same unit 800V DC between cores and screen INSTRUMENTATION & CONTROL 50 V CABLES r Minimum bending radius in fixed installations 6 x outer diameter Copyright April 03 - Nexans 89

Application TX (C) 33 type is used on board of ships for fixed installations not subject to mechanical risk complying with IEC standards 6009-35 in safety circuit, where fire resistance is required. TX (C) 33 type meets 6033-and also IEC 6033- or fire resistant performances during 90 minutes, withstands IEC 6033-3- fire test on bunched cables and peforms to the SOLAS requirements. All materials used to produce this cable are halogen free. The design ensures that non corrosive and low toxic gases are emitted in case of fire. Therefore, this cable type is especially designed for installations on passenger ships, on Mega Yachts as on other commercial vessels. TX (C) 33 Instrumentation 50/50 (300) V Max conductor temperature: 90 C Design. Conductor Stranded bare copper class. Insulation HF 90 Special Fire Resistant Halogen Free Compound 3. Collective screen Alu/Polyester tape with a tinned copper drain wire 4. Outer sheath Polyolefin SHF Colour: orange SHF on request 3 3 3 3 3 4 4 4 4 4 3 4 Marking NEXANS TX (C) 33 50/50 V «n» P or T «s» mm 90 C IEC 6033-3- «WW/YY» * * + Metric Marking Pair Identification Pair: white/ blue with printed pair number and core number Triple: white/ blue/ brown with only printed triple number Standards Construction & Design: IEC 6009-350 IEC 6009-376 Tests performances: IEC 6033- IEC 6033-, IEC 6033- or IEC 6033-3- IEC 60754-/60754- IEC 6034 Materials: IEC 6009-35 IEC 6009-359 Fire resistant IEC 6033- IEC 6033- or Fire retardant IEC 6033-3- Flame retardant IEC 6033- Br Cl F Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- -30 + 80 C EMI 90

TX (C) 33 50/50 (300) V - Instrumentation Cables (mm ) Min. Outer diameter Nom. Max. Weight approx. (kg/km) x x 0.75* 7.8 8. 9. 0 4 x x 0.75.0.4 4.0 70 7 x x 0.75 4.5 5. 6.5 70 0 x x 0.75 7.5 8.3 0.0 40 4 x x 0.75 9.5 0.5.5 50 9 x x 0.75.5 3.7 5.5 670 4 x x 0.75 5.5 6.6 8.5 860 x 3 x 0.75.0.6 4.0 90 4 x 3 x 0.75 3.0 3.9 5.5 40 7 x 3 x 0.75 7.0 7.8 9.5 390 0 x 3 x 0.75 0.0.0 3.0 570 x x.5* 9.0 9.4 0.5 60 4 x x.5 3.5 4. 5.5 60 7 x x.5 7.0 7.6 9.0 40 0 x x.5 0.0.0 3.0 60 4 x x.5 3.0 3.8 5.5 780 9 x x.5 6.5 7.4 9.5 030 x 3 x.5 3.5 4. 5.5 70 4 x 3 x.5 5.0 6.0 7.5 370.5 mm cables are manufactured on request.. * pairs are assembled as a quad r Test Voltage 3600V DC between cores of the same unit 800V DC between cores and screen Minimum bending radius in fixed installations cable diameter 5 mm 4 x outer diameter cable diameter > 5 mm 6 x outer diameter Copyright April 03 - Nexans INSTRUMENTATION & CONTROL 50 V CABLES 9

TX (I) 33 Instrumentation Application TX (I) 33 type is used on board of ships for fixed installations not subject to mechanical risk complying with IEC standards 6009-35 in safety circuit, where fire resistance is required. TX (I) 33 type meets IEC 6033- and also 6033- or fire resistant performances during 90 minutes, withstands IEC 6033-3- fire test on bunched cables and peforms to the SOLAS requirements. All materials used to produce this cable are halogen free. The design ensures that non corrosive and low toxic gases are emitted in case of fire. Therefore, this cable type is especially designed for installations on passenger ships, on Mega Yachts as on other commercial vessels. 50/50 (300) V Max conductor temperature: 90 C Design. Conductor Stranded bare copper class. Insulation HF 90 Special Fire Resistant Halogen Free Compound 4. Outer sheath Polyolefin SHF Colour: orange SHF on request 3 3. Individual screen Alu/Polyester tape with a tinned copper drain wire 4 Marking NEXANS TX (I)33 50/50 V «n» P or T «s» mm 90 C IEC 6033-3- «WW/YY» * * + Metric Marking Pair Identification Pair: white/ blue with printed pair number and core number Triple: white/ blue/ brown with only printed triple number Standards Construction & Design: IEC 6009-350 IEC 6009-376 Tests performances: IEC 6033- IEC 6033-, IEC 6033- or IEC 6033-3- IEC 60754-/60754- IEC 6034 Materials: IEC 6009-35 IEC 6009-359 Fire resistant IEC 6033- IEC 6033- or Fire retardant IEC 6033-3- Flame retardant IEC 6033- Br Cl F Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- -30 + 80 C EMI 9

TX (I) 33 50/50 (300) V - Instrumentation Cables (mm ) Min. Outer diameter Nom. Max. Weight approx. (kg/km) x x 0.75 6.6 6.9 8. 80 x x 0.75 0.0 0.5.5 50 4 x x 0.75.0.4 4.5 0 7 x x 0.75 4.5 5. 7.5 340 0 x x 0.75 7.0 7.9.0 470 4 x x 0.75 9.5 0.4 3.5 630 9 x x 0.75.5 3.5 7.0 830 4 x x 0.75 5.0 6. 30.0 060 x 3 x 0.75 7.0 7.3 8.6 80 x 3 x 0.75.0.4 4.5 0 4 x 3 x 0.75 3.0 3.6 6.0 70 7 x 3 x 0.75 6.5 7.4 0.5 450 0 x 3 x 0.75 9.5 0.5 3.5 660 x x.5 7.8 8. 9. 00 x x.5.0.7 4.0 0 4 x x.5 4.5 5.0 6.5 30 7 x x.5 7.5 8.3 0.0 500 0 x x.5.0. 4.0 700 4 x x.5 4.0 5.0 7.0 950 9 x x.5 8.0 8.9 3.0 60 x 3 x.5 8. 8.6 9.6 0 x 3 x.5 4.5 5.0 6.5 300 4 x 3 x.5 6.0 6.7 8.5 40.5 mm cables are manufactured on request. r Test Voltage 3600V DC between cores of the same unit 800V DC between cores and screen Minimum bending radius in fixed installations cable diameter 5 mm 4 x outer diameter INSTRUMENTATION & CONTROL 50 V CABLES cable diameter > 5 mm 6 x outer diameter Copyright April 03 - Nexans 93

TCX (C) 33 Instrumentation Application TCX (C) 33 type is used on board of ships for fixed installations complying with IEC standards 6009-35 in safety circuit, where fire resistance is required. TCX (C) 33 type meets IEC 6033- and also IEC 6033- or fire resistant performances during 90 minutes, withstands IEC 6033-3- fire test on bunched cables and performs to the SOLAS requirements. All materials used to produce this cable are halogen free. The design ensures that non corrosive and low toxic gases are emitted in case of fire. Therefore, this cable type is especially designed for installations on passenger ships, on Mega Yachts as on other commercial vessels. 50/50 (300) V Max conductor temperature: 90 C Design. Conductor Stranded bare copper class. Insulation HF 90 Special Fire Resistant Halogen Free Compound 4. Armouring Bare copper braid. 5. Outer sheath Polyolefin SHF Colour: orange SHF on request 3 4 3 3 4 3 4 3 4 4 3 4 3. Inner covering Lapped Polyester Tape 5 Marking NEXANS TCX (C) 33 50/50 V «n» P or T «s» mm 90 C IEC 6033-3- «WW/YY» * * + Metric Marking * except for pair and triple, the cable marking is TCX(I) Pair Identification Pair: white/ blue with printed pair number and core number Triple: white/ blue/ brown with only printed triple number Standards Construction & Design: IEC 6009-350 IEC 6009-376 Tests performances: IEC 6033- IEC 6033-, IEC 6033- or IEC 6033-3- IEC 60754-/60754- IEC 6034 Materials: IEC 6009-35 IEC 6009-359 Fire resistant IEC 6033- IEC 6033- or Fire retardant IEC 6033-3- Flame retardant IEC 6033- Br Cl F Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- -30 + 80 C EMI 94

TCX (C) 33 50/50 (300) V - Instrumentation Cables (mm ) Min. Outer diameter Nom. Max. Weight approx. (kg/km) x x 0.75 7.4 7.8 9. 00 x x 0.75* 8.4 8.7 0.5 40 4 x x 0.75.0.7 5.0 50 7 x x 0.75 5.0 5.7 8.5 40 0 x x 0.75 7.5 8.4.5 560 4 x x 0.75 0.0 0.7 4.0 690 9 x x 0.75.5 3.6 7.5 880 4 x x 0.75 5.0 6. 30.0 090 x 3 x 0.75 7.8 8. 9.6 0 x 3 x 0.75.0.7 5.0 60 4 x 3 x 0.75 4.0 4.6 7.0 360 7 x 3 x 0.75 7.5 8..0 550 0 x 3 x 0.75 0.0 0.9 4.5 750 x x.5 8.6 9.0 0.0 30 x x.5* 9.8 0.3.5 90 4 x x.5 5.0 5.8 7.5 380 7 x x.5 8.0 9.0 0.5 560 0 x x.5.5.6 4.5 790 4 x x.5 4.5 5.4 7.5 990 9 x x.5 8.0 9.0 3.0 80 x 3 x.5 9. 9.5 0.5 50 x 3 x.5 5.0 5.8 7.5 390 4 x 3 x.5 6.5 7.5 9.0 500 7 x 3 x.5.0. 4.0 770.5 mm cables are manufactured on request. TCX(C) 33cables are also manufactured with extruded inner covering, on request. r Test Voltage * pairs are assembled as a quad 3600V DC between cores of the same unit 800V DC between cores and armour Minimum bending radius in fixed installations 6 x outer diameter Copyright April 03 - Nexans INSTRUMENTATION & CONTROL 50 V CABLES 95

TCX (I) 33 Instrumentation Application TCX (I) 33 type is used on board of ships for fixed installations complying with IEC standards 6009-35 in safety circuit, where fire resistance is required. TCX (I) 33 type meets IEC 6033- and also IEC 6033- or fire resistant performances during 90 minutes, withstands IEC 6033-3- fire test on bunched cables and performs to the SOLASrequirements. All materials used to produce this cable are halogen free. The design ensures that non corrosive and low toxic gases are emitted in case of fire. Therefore, this cable type is especially designed for installations on passenger ships, on Mega Yachts as on other commercial vessels. 50/50 (300) V Max conductor temperature: 90 C Design. Conductor Stranded bare copper class. Insulation HF 90 Special Fire Resistant Halogen Free Compound 3. Individual screen Alu/Polyester tape with a tinned copper drain wire 4. Inner covering Lapped Polyester Tape 5. Armouring Bare copper braid 6. Outer sheath Polyolefin SHF Colour: orange SHF on request 3 4 5 6 Marking NEXANS TCX (I) 33 50/50 V «n» P or T «s» mm 90 C IEC 6033-3- «WW/YY» * * + Metric Marking Pair Identification Pair: white/ blue with printed pair number and core number Triple: white/ blue/ brown with only printed triple number Standards Construction & Design: IEC 6009-350 IEC 6009-376 Tests performances: IEC 6033- IEC 6033-, IEC 6033- or IEC 6033-3- IEC 60754-/60754- IEC 6034 Materials: IEC 6009-35 IEC 6009-359 Br Cl F EMI Fire resistant IEC 6033- IEC 6033- or Fire retardant IEC 6033-3- Flame retardant IEC 6033- Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- -30 + 80 C 96

TCX (I) 33 50/50 (300) V - Instrumentation Cables (mm ) Min. Outer diameter Nom. Max. Weight approx. (kg/km) x x 0.75.0.4 3.5 0 4 x x 0.75.5 3.3 5.5 80 7 x x 0.75 6.0 6.5 9.0 470 0 x X 0.75 8.5 9.5.5 660 4 x x 0.75.0.8 5.5 800 9 x x 0.75 4.0 4.9 8.5 030 4 x x 0.75 6.5 7.8 3.0 300 x 3 x 0.75.5 3.3 5.5 80 4 x 3 x 0.75 4.5 5. 7.5 400 7 x 3 x 0.75 8.0 9.0.0 60 0 x 3 x 0.75.0. 5.5 850 x x.5 3.5 4.3 6.0 330 4 x x.5 6.0 6.6 8.0 430 7 x x.5 9.0 9.9.5 650 0 x x.5.5 3.7 5.5 90 4 x x.5 5.5 6.4 8.5 50 9 x x.5 9.5 30.5 33.0 500 4 x x.5 33.0 34.4 37.0 970 x 3 x.5 5.5 6.4 8.0 40 4 x 3 x.5 7.5 8. 0.0 550.5 mm cables are manufactured on request TCX(I) 33cables are also manufactured with extruded inner covering, on request. r Test Voltage 3600V DC between cores of the same unit 800V DC between cores and screen Minimum bending radius in fixed installations 6 x outer diameter Copyright April 03 - Nexans INSTRUMENTATION & CONTROL 50 V CABLES 97

Part 5 Communication cables Copyright April 03 - Nexans COMMUNICATION CABLES 99

Radio Frequency Cables COAX FLAMEX - RG serie Application High Frequency Data transmission (communication equipment, radar, instrumentation equipment). Video signal transmission 50 Ω / 75 Ω Max conductor temperature: 70 C Design. Conductor Solid or stranded TC: Tinned copper BC: Bare copper BCw: Bare copperweld SC: Silvered copper SPCCS: Silver plated copper on steel. Dielectric Foam PE (polyethylene) 3. Fire Barriers Aluminium foil 4. Screen Single or double braid Bare, tinned or silvered copper 5. Outer sheath Polyolefin SHF Colour: Black 3 4 5 Marking FILOTEX P FLAMEX «Cable Type» Standards Construction & Design MIL C 7 (RG) Tests performances: IEC 6033- IEC 60754-/60754- IEC 6034 Material: IEC 6009-359 Br Cl F EMI Flame retardant IEC 6033- Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- -30 + 60 C 00

COAX 50 Ω - MIL C7 Cable type Conductor Stranding Diam Dielectric Diam Braid Wire Diameter Outer Diameter Weight (kg/km) RG 58 CU 9 x 0.8 TC 0.90 3.0 TC 4.95 ± 0.5 40 RG 74 AU 7 x 0.6 BCw 0.48.55 TC.80 ± 0.5 0 RG 3 U 7 x 0.75 BC.5 7.30 BC 0.3 ± 0.0 57 RG 4 U 7 x 0.75 SC.5 7.30 x SC 0.8 ± 0.0 95 RG 78 U 7 x 0.0 SPCCS 0.30 0.90 SC.80 ± 0.0 7 RG 3 U x 0.90 SC 0.90 3.0 x SC 5.38 ± 0.5 55 COAX 75 Ω - MIL C7 Cable type Stranding Conductor Diam Dielectric Diam Braid Wire Outer Diameter Weight (kg/km) RG 6 x.0 BC.0 4.5 TC 7. ± 0.0 80 RG 59 x 0.57 BCw 0.57 3.75 BC 6.5 ± 0.5 53 RG x.6 BC.6 7. TC 0.3 ± 0.0 35 TC: Tinned copper BC: Bare copper BCw: Bare copper weld SC: Silvered copper SPCCS: Silver plated copper or steel conductor Electrical Characteristics RG 78 RG 58 RG 74 RG 3 RG 4 RG 59 RG 3 RG 6 RG Capacitance (pf/m) 00 00 00 00 00 67 00 5 53 Copyright April 03 - Nexans Impedance at 00 MHz 50 ± 50 ± 50 ± 50 ± 50 ± 75 ± 3 50 ± 75 ± 3 75 ± 3 (Ω) Attenuation (db/00m): 50 MHz 38 3 3 5 0 5 4.6.8 00 MHz 5 3 7 8 4 6.4 4. 00 MHz 74 34 46 3 3 0 30 9.0 5.9 400 MHz 08 55 8 5 9 39.8 8.5 000 MHz 70 9 47 9 39 5 68 0.8 4.3 r Minimum bending radius in fixed installations 0 x outer diameter COMMUNICATION CABLES 0

Radio Frequency Cables COAX FLAMEX - KX serie Application High Frequency Data transmission (communication equipment, radar, instrumentation equipment). Video signal transmission. 50 Ω / 75 Ω Max conductor temperature: 70 C Design. Conductor Solid or stranded APCR: Bare copper plated steel BC: Bare copper. Dielectric PE (polyethylene) 3. Fire Barriers Aluminium foil 4. Screen Single or double braid Bare or tinned copper 5. Outer sheath Polyolefin SHF Colour: Black 3 4 5 Marking FILOTEX P FLAMEX «Cable Type» Standards Construction & Design in line with MIL C7 Tests performances: IEC 6033-3- IEC 60754-/60754- IEC 6034 Material: IEC 6009-359 Br Cl F EMI Flame retardant IEC 6033--3- Low smoke IEC 6034 Halogen free IEC 60754- No toxicity No corrosivity IEC 60754- -30 + 60 C 0

COAX 50 Ω Cable type Conductor Stranding Diam Dielectric Diam Braid Material Outer Diameter Weight (kg/km) KX 3B 7 x 0.6 APC R 0.48.50 TC.55 ± 0.3 0 COAX 75 Ω Cable type Stranding Conductor Diam Dielectric Diam Braid Material Outer Diameter Weight (kg/km) KX 6A 7 x 0.0 BC 0.60 3.70 BC 6.0 ± 0.5 57 KX 8 7 x 0.40 BC.0 7.5 BC 0.30 ± 0.0 45 APCR: Bare copper plated steel TC: Tinned copper BC: Bare copper Electrical Characteristics KX 3B KX 8 KX 6A Characteristic Impedance (Ω) 50 75 75 Capacitance (pf/m) 06 7 7 Velocity (%) 66 66 66 Attenuation (db) at : 00 MHz 45 0 Equivalence Table between KX and RG series Copyright April 03 - Nexans 50 Ω 75 Ω r KX 3B RG 74 AU KX 4 RG 3 U KX 3 RG 4 U KX 5 RG 58 CU KX RG 78 BU KX 6A RG 59 BU KX 8 RG AU Minimum bending radius in fixed installations 0 x outer diameter COMMUNICATION CABLES 03

Application Profibus cables dedicated for fixed installation on board of ship. Connection cable for digital signals up to 0 MBd. PROFIBUS PI 735 - Pair AWG 50 Ω Max conductor temperature: 70 C Design. Conductor Standed bare copper AWG 9 wires. Insulation Foam skin PE 3. Overall Screen Aluminium/Polyester tape + tinned copper braid 4. Outer sheath Halogen Free Polyolefin SHF Colour: black 3 4 Marking NEXANS 50 Ω PROFIBUS x x 4 AWG or x x AWG Core Identification core : red core : green Standards Construction & Design: Nexans Specification Tests Performances: IEC 6033- & IEC 60754- / IEC 60754- IEC 6034 Br Cl F Flame retardant IEC 6033-& Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- -30 C + 75 C 04

PROFIBUS - x x AWG Electrical characteristics Characteristic impedance 50 Ω ± 0 Ω Mutual capacitance 35 nf/km (at 800 Hz) Insulation resistance G Ω.km Attenuation at 9.6 khz 3 db/km 38.4 khz 5 db/km 4 khz 30 db/km 6 khz 60 db/km Screening attenuation 00 khz to 30 MHz 65 db Physical characteristics Cable Designation Diameter Weight (kg/km) x x AWG PI 735 0.0 30 r Minimum bending radius in fixed installations 0 x outer diameter Copyright April 03 - Nexans COMMUNICATION CABLES 05

CAN BUS CABLES Application These cables are dedicated to the shipbuilding industry 0 Ω pair & pairs Max conductor temperature: 70 C Design. Pair Tinned copper AWG 0 = 0.5 mm 9 wires 0,0 mm. Insulation Foam PE 3. Screen Tinned copper braid 4. Tape Polyester 5. Outer sheath SHF compound Colour: black 3 4 5 Marking NEXANS P FILOTEX ( PI 734 CAN BUS XX0,5) or ( PI 33 CAN BUS XX0,5) Core Identification pair : blue-red pair : white-yellow Standards Tests performances: IEC 6033-3- IEC 6033-- IEC 60754-/60754- IEC 6034 Materials: IEC 6009-359 Br Cl F Flame retardant IEC 6033-- Fire retardant IEC 6033-3- Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- -0 + 60 C 06

Dimensionnal Characteristics Core diameter Cable diameter Min/Max Weight (kg/km) pair.35 6.30/7.30 65 pairs.85 9.0/0.0 0 r Minimum bending radius in fixed installations 0 x outer diameter Copyright April 03 - Nexans COMMUNICATION CABLES 07

Local Area Network (LAN) SF/UTP Category 6 Cables Application Nexans SF/UTP Category 6 cables are the mid-range 50 MHz offered from Nexans. Manufactured in accordance with ISO IEC 656-5 requirements, the SF/UTP cable is the best choice to support all Class E applications like Ethernet, Fast Ethernet, Gigabit Ethernert... The Cat. 6 SF/UTP cables are suitable for basic voice and data installations up to 50 MHz. 4 pairs and 8 pairs (DUAL x 4 pairs) Design. Central cross. Conductor Solid bare copper 4 AWG 3. Insulation Foam skin PE (polyethylene) diameter:.3 mm 4. Collective Screen Alu/Polyester tape + Tinned copper braid 5. Outer sheath Polyolefin Colour: orange 3 4 5 Marking SF /UFTP «Number of pairs» LSZH LANMark CATEGORY 6 «MM/YY» + Metric Marking Core Identification Pair : white/blue Pair : white/orange Pair 3: white/green Pair 4: white/brown Standards Construction & Design : EN 5088 IEC 656-5 ISO 80 Tests Performances : IEC 6033- IEC 60754-/60754- IEC 6034 Br Cl F EMI Flame retardant IEC 6033- Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- -0 + 60 C 08

LOCAL AREA NETWORK (LAN) - SF/UTP Category 6 Cables Dimensional data Cable Outer Diameter Weight Approx. (kg/km) Minimum Bending Radius 4 Pairs 7.6 60 3 8 pairs (DUAL) 5. x 7.6 0 3 Electrical Characteristics Electrical characteristics Mutual capacitance Characteristic impedance Maximum conductor electrical resistance in DC at 0 C 56 nf/km 00 Ohm 80 Ohm/km Transmission Characteristics Transmission characteristics Skew 45ns/00m Velocity of propagation 67% Coupling attenuation at 30 MHz 75 db Propagation delay (Max at 00 MHz 537.6 ns/00m Copyright April 03 - Nexans COMMUNICATION CABLES 09

Local Area Network (LAN) F/UTP category 5e Cables Application F/UTP Category 5e cables are the standard 00 MHz offered from Nexans. Manufactured in accordance with ISO IEC 656-5 requirements, the F/UTP cable is the best choice to support all Class D applications like Ethernet, Fast Ethernet, Gigabit Ethernet,... Cat. 5e F/UTP cables are suitable for basic voice and data installations up to 00 MHz. 4 pairs Design. Conductor Solid bare copper 4 AWG. Insulation Foam skin PE (polyethylene) diameter:.06 mm 3. Screen Alu/Polyester tape Tinned copper drain wire 4. Outer sheath Polyolefin Colour: grey 3 4 Marking F/UTP «Number of pairs» LSZH LANMark CATEGORY 5e «MM/YY» + Metric Marking Core Identification Pair : white/blue Pair : white/orange Pair 3: white/green Pair 4: white/brown Standards Construction & Design: EN 508 IEC 656-5 ISO 80 Tests performances: IEC 6033- IEC 60754- / IEC 60754- IEC 6034 Br Cl F EMI Flame retardant IEC 6033- Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- -0 + 60 C 0

LOCAL AREA NETWORK (LAN) - F/UTP Category 5e Cables Dimensional data Cable Outer Diameter Weight Approx. (kg/km) Minimum Bending Radius 4 Pairs 5.9 4 4 Electrical Characteristics Electrical characteristics Mutual capacitance Characteristic impedance Maximum conductor electrical resistance in DC at 0 C 56 nf/km 00 Ohm 95 Ohm/km Transmission Characteristics Transmission characteristics Skew 45ns/00m Velocity of propagation 67% Coupling attenuation at 30 MHz 75 db Propagation delay (Max at 00 MHz 537.6 ns/00m Attenuation values at 0 C for various frequency (db/00m) Frequency (MHz) Attenuation NEXT ACR PS NEXT EL FEXT PS EL FEXT Return LOSS (Ohm) Copyright April 03 - Nexans. 67.3 65. 65.3 65.0 6.0 0.5 0 6.5 5.3 45.8 50.3 45.0 4.0 5.5 0 9.3 47.8 38.5 45.8 39.0 36.0 5.5 3.5.7 44.9 33. 4.9 35. 3. 4. 6.5 7.0 40.4 3.4 38.4 9. 6..0 00.0 37.3 5.3 35.3 5.0.0 0.6 55 8. 34.4 6.3 3.4. 8. 9.3 ACR:...................Attenuation to Crosstalk Ratio (Headroom) It is the difference between NEXT and Attenuation NEXT:....................................... Near End Crosstalk PS NEXT:..... Power Sum (Cumulative measure of crosstalk) FEXT:..........................................Far End Crosstalk EL FEXT:.........................................Equal Level FEXT PE EL FEXT:..................................Power Sum EL FEXT COMMUNICATION CABLES

Local Area Network (LAN) S/FTP Category 7 Cables Application Nexans S/FTP Category 7 cables are the high end 600 MHz offered from Nexans. Manufactured in accordance with ISO IEC 656-5 requirements, this cable is the best choice to support all Class F applications like Ethernet, Fast Ethernet, Gigabit Ethernet... The Cat. 7 S/FTP cables are suitable for voice, data, CATV and and sharing application installations up to 600 MHz. 4 pairs Design. Conductor Solid bare copper 3 AWG. Insulation Foam skin PE (polyethylene) diameter:.4 mm 3. Laying up 4 pairs screened by individual Alu/PET tape 4. Screen Overall tinned copper braid 5. Outer sheath Polyolefin Colour: orange 3 4 5 Marking S/FTP «Number of pairs» LSZH CATEGORY 7 «MM/YY» + Metric Marking Core Identification Pair : white/blue Pair : white/orange Pair 3: white/green Pair 4: white/brown Standards Construction & Design : EN 5073 /EN 5088-4- ISO/IEC 80 IEC 656-5 Tests Performances : IEC 6033- IEC 60754-/60754- IEC 6034 Br Cl F EMI Flame retardant IEC 6033- Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- -0 + 60 C

LOCAL AREA NETWORK (LAN) - S/FTP Category 7 Cables Dimensional data Cable Outer Diameter Weight Approx. (kg/km) Minimum Bending Radius 4 Pairs 7.6 53 3 Electrical Characteristics Electrical characteristics Mutual capacitance Characteristic impedance Maximum conductor electrical resistance in DC at 0 C 45 nf/km 00 Ohm 75 Ohm/km Transmission Characteristics Transmission characteristics Velocity of propagation 80% Propagation delay (Max at 00 MHz 537.6 ns/00m Attenuation values at 0 C for various frequency (db/00m) Frequency (MHz) Attenuation NEXT ACR PS NEXT EL FEXT PS EL FEXT Return LOSS (Ohm) Copyright April 03 - Nexans.0 83.0 8.0 80.0 78.0 75.0 0.5 0 5.9 83.0 77. 80.0 74.0 7.0 5.5 0 8.3 83.0 74.7 80.0 68.0 65.0 5.5 3.5 0.4 83.0 7.6 80.0 64. 6. 4. 6.5 4.9 80.5 65.6 77.5 58. 55..0 00 9.0 77.4 58.4 74.4 54.0 5.0 0.6 55 4.0 74.5 50.6 7.5 50. 47. 9.3 00 7.5 7.9 45.4 69.9 48.0 45.0 8.5 50 3.0 7.4 40.5 68.4 46.0 43.0 7.8 500 45.3 66.9.7 63.9 40.0 37.0 7.8 600 50. 65.7 5.6 6.7 38.4 35.4 7.8 ACR:...................Attenuation to Crosstalk Ratio (Headroom) It is the difference between NEXT and Attenuation NEXT:....................................... Near End Crosstalk PS NEXT:..... Power Sum (Cumulative measure of crosstalk) FEXT:..........................................Far End Crosstalk EL FEXT:.........................................Equal Level FEXT PE EL FEXT:..................................Power Sum EL FEXT COMMUNICATION CABLES 3

LAN CABLING Application Nexans Cabling Solutions has developed the LANmark Maritime Cabling System to support LAN communication onboard ships and on offshore units. It addresses the requirement of the marine industry for performing, highly reliable and ruggedised data networks. The LANmark Maritime product series benefits from advanced copper (LANmark-7A GG45 Maritime) and optical technologies (LANmark-OF) in order to support the deployment of LANs in office and control areas, in accommodation and living quarters as well as in processing and industrial areas. Nexans Cabling Solutions offers an application independent LAN platform that will support the existing as well as the forthcoming LAN technologies such as Ethernet, Gigabit Ethernet, 0Gigabit Ethernet, ATM, fibre channel It also offers the possibility to deploy neighbouring technologies such as CATV for entertainment, voice applications and VoIP. It is also designed to support industrial technologies such as Industrial Ethernet. Design. Cable Fully screened 000 MHz Cat.7A Multimedia or fibre optic. Patchpanel 4 connectors GG45 Maritime Cat. 7A vibration proof or Fiber optic, for 9 racks 3. Outlet connectors GG45 Maritime Cat. 7A or Fiber optic For data, voice and multimedia application For indoor or outdoor or industrial areas 4. Consolidation Point Connection of pre-assembled cabins equipement Standards ISO/IEC 80:008 EN 5073:00 Draft ISO/IEC 470 IEC 60603-7-7 IEC 656-5 EN 5088-4- Please contact our commercial department for further information about LAN cabling systems: - Copper patchcords - Fibre optic patchcords - Pre-terminated copper and fibre optic cables - Multimedia adapters - Specific link / channel requirements 4

LAN CABLING - Cable Cables Type Bandwidth Copper LANmark-7A Maritime(*) SHF LSFROH S-FTP 000 MHz 7.9 mm 4 pairs AWG3-70 Kg/km Indoor N0m.00 Copper LANmark-7A Oil & Gas Mud Resistant S-FTP 000 MHz 8.9 mm 4 pairs AWG3-7 Kg/km Drilling / N0g.003 exposed area Fibre LANmark-OF Tight Buffer 50/5 OM Various - 4-6 -8 - - 4 cores Indoor / Several P/N - 4-6 -8 - - 4 or OM3 Outdoor Single/Multimode Fiber LAN CABLING - Connectors and Couplers 9/5 OS Nominal Diameter Conductors Cables Weight Application Part Number (*) SHF : Fire Performance according to IEC 6033-3-4, IEC 60754-, IEC 60754-, IEC 6034- Item Type Number of ports Connection Application Part Number Copper LANmark-7A GG45 maritime Connector 4 copper connectors RJ45 - GG45 9 patchpanels N4m.730 Fibre Fibre Optic Coupler 4 LC Duplex or 4 LC Duplex or 9 patchpanels Various SC Duplex SC Duplex LAN CABLING - Outlets to be fitted with LANmark-7 Maritime or LANmark-OF connectors Outlet Type Number of ports Dimensions H x W x D Application Part Number Copper & Fibre Wall / Surface mount 50 x 50 mm Metal 50 x 50 x 55 mm Indoor N790.980 Copper & Fibre Din / Rail mount DIN-Rail 77.8 x 8 x 65 mm Technical cabinets N0m.00 LAN CABLING - Patchpanels to be fitted with LANmark-7A Maritime or LANmark-OF connectors Patchpanel Type Number of ports Dimensions H x W x D Application Part Number Copper Vibration Proof 4 copper connectors HU x 9 9 racks N5m00 Fibre Optic Metal / Sliding 4LCDuplex or SCDuplex or 4 MTRJ HU x 9 x 80 mm 9 racks N44.0 Fibre Optic Metal / Sliding 4 ST couplers HU x 9 x 80 mm 9 racks N44.0 LAN CABLING - Class FA Link Performances (ISO / IEC 80) Copyright April 03 - Nexans Frequency (MHz) Attenuation (db/00m) NEXT (db) PSNEXT (db) 00 0.3 65.0 44.7 63.4 50 3.5 59. 6.7 54. 600 5.4 54. 0,7 49. 000 67.6 47.9-9.6 44.8 LAN CABLING - LANmark - 7A cable Performances (Typical at 0 C) Frequency (MHz) Attenuation (db/00m) NEXT (db) ACR (db/00m) ACR (db/00m) PSNEXT (db) 00 8.0 > 00 85.0 > 00 50 9.4 98.0 68.6 96.0 600 47.6 88.0 40.4 86.0 000 63.6 8.0 8.4 80.0 COMMUNICATION CABLES 5

LANmark LSZH 7 Lloyd s CAT7 S / FTP 3 AWG LSZH Application LANmark 7 is the highest performing standardised solution in the market and will support all current and planned data applications. All Ethernet applications including 4 pairs 000 base T 000 base TX 0 GBase-T Any future class F application Cable sharing applications The Lloyd s version is certified for marine use. Design. Type of cable STP. Screen Aluminium tape and copper braid 3. Sheath colour LSZH Blue Specification LANmark 7 cable is a 4pr S/FTP with individual pair foils and overall braid offering performance to 600MHz. It is fully compliant with the category 7 standards. The Lloyd s certified for marine use and has a blue jacket. 3 Performance Tested and guaranteed performances to 600MHz. The LanMARK-7 Lloyd s cable provides headroom and bandwidth over and above the requirements of ISO/IEC 80:00, IEC 656-5, EN 5073, EN 5088 and TIA/EIA 568-B--. Installation Installation is one of the unique features of the LANmark-7 cable. Extra attention has been paid to ensure that screen coverage is maintaied both during and after installation. The cable has been designed specifically to offer both optimum performance and ease of termination with LANmark Snap-in connectors. Standards EN 5073 /EN 5088-4- ISO/IEC 80 IEC 656-5 Br Cl F EMI Flame retardant IEC 6033- Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- -0 + 60 C 6

LANMARK 7 LLOYD S CAT7 S / FTP 3 AWG LSZH BLUE 500M REEL Attenuation db/m NEXT p/p db ACR db/ Frequency Standard Typical Standard Typical Standard Typical.0.9 80.0 90.0 78.0 88.0 4 3.6 3.5 80.0 90.0 76.4 86.0 0 5.7 5.5 80.0 90.0 74.3 84.0 6 7. 7.0 80.0 90.0 7.8 83.0 0 8. 7.8 80.0 90.0 7.9 8.0 3.5 0. 9.9 80.0 90.0 69.9 79.0 6.5 4.5 4. 5.5 90.0 6.0 76.0 00 8.5 8.0 7.4 85.0 53.9 67.0 55 3.4.7 69.6 80.0 46. 57.0 00 6.8 6.0 67.9 75.0 4. 50.0 50 30. 9.4 66.5 75.0 36.3 45.0 300 33.3 3.5 65.3 75.0 3.9 4.0 600 48.9 47.6 60.8 7.0.9 5.0 Copyright April 03 - Nexans COMMUNICATION CABLES 7

Optical Fiber cables Application These optical fiber cables are designed to data transmission in ship and specially in cruise ship where low smoke, halogen free and fire retardant cables are required to increase safety on board. TBW Structure. Central FRP. Coated optical fiber 50/900 µm 3. Glass Yarns Reinforcement 4. Outer sheath LSHF - FR compound black 3 4 Marking Nexans Fiber Optic cable TBW SP 678 «n» x «ft» Marking Nexans Fiber Optic cable UG LSZH SP 767 «n» x «ft» - FB Br Cl F Fire resistant IEC 6033-5 (80 ) Flame retardant IEC 6033- FRT 6033-3 Fire retardant IEC 6033-3-5 Water tight Halogen Free Low smoke -40 + 70 C 8

TBW Structure - Optical Fibers Cable Number of Optical Fibers Cable diameter Weight Approximative (kg/km) Minimum Bending Radius without tension Minimum Bending Radius with tension Maximum pulling force (dan) 4/6 5.7 38 55 85 00 8 6.5 47 65 95 00 6.7 49 70 00 00 4 7.9 75 80 0 75 Products on request Copyright April 03 - Nexans COMMUNICATION CABLES 9

BREAKOUT CABLES Halogen Free multi-patchs Application These cables are designed for data transmission in on-board electronic equipments when a higher ban width and a higher transmission distance are required. They are also designed for direct ST or SC termination. Multimode 6.5/5 µm Design. Patch cord Core: glass ø = 6.5 ± 3 µm Cladding: glass ø = 5 ± 3 µm Coating: acrylate ø = 45 ± 0 µm Buffer: thermoplastic elastomer ø = 900 ± 50 µm Sheath SHF compound ø =.00 ± 0.5 mm. Polyester separator tape 3. Outer sheath SHF compound Colour: yellow Reinforcement Aramid yarns 3 Marking FILOTEX P EDE Study number - WW YY* (*week and year) Core Identification Orange cores printed in black number from to n Standards Performance Test : IEC 6033-3-4 IEC 6034-& IEC 60754-/ & IEC 6034-/ Materials : IEC 6009-359 Br Cl F Fire retardant IEC 6033-3- Flame retardant IEC 6033- Halogen free IEC 60754- Low smoke IEC 6034-/ Low toxicity Low corrosivity IEC 60754- -5 + 75 C 0

BREAKOUT Cables - Halogen free multi-patchs cables NEXANS Reference Numbers of Fibers Diameter Weight (kg/km) Static (N) Max. load IEC 794--E Dynamic (N) Minimum Bending Radius IEC 794--E0 Static Dynamic Crush Resistance IEC 794--E3 (N/cm) PC94 6.0 0 500 50 60 0 50 PC95 4 7.0 40 000 500 70 40 50 PC909 6 8.0 60 500 600 80 60 50 PC96 8 8.5 80 000 700 85 70 50 PC908 0.0 00 000 700 00 00 50 Transmission Characteristics Attenuation Wave length 850 nm 3.5 db/km 300 nm.5 db/km Copyright April 03 - Nexans COMMUNICATION CABLES

Part 6 Specific applications cables Copyright April 03 - Nexans SPECIFIC APPLICATIONS CABLES

MX Wiring Cables Application MX type is used on board of ships installations complying with IEC standards 6009-35 and especially for electrical cabling of cabinet or switchboard. MX type withstands IEC 6033-3- fire test on bunched cables and performs to the SOLAS requirements. 0.6/(.) kv Max conductor temperature: 90 C Design. Conductor Flexible bare copper class 5. Insulation Polyolefin HF 90 Colours: red, black, blue, white, green/yellow Marking NEXANS MX 0.6/ kv «Section» mm 90 C IEC 6033-3- «year» * * Standards Construction & Design: IEC 608 IEC 6009-350 IEC 6009-353 Tests performances: IEC 6033-3- IEC 6033- IEC 60754-/60754- IEC 6034 Materials: IEC 6009-35 Br Cl F Fire retardant IEC 6033-3- Flame retardant IEC 6033- Halogen free IEC 60754- Low smoke IEC 6034 Flexible No toxicity No corrosivity IEC 60754- -30 to 80 C 4

MX - 0.6/(.) kv - Wiring Cables Cables (mm ) Permissible current rating in open air (A) Min. Outer diameter Nom. Max. Weight approx. (kg/km) x 0.75 5..4.9 3 x 6.3.5 3.0 6 x.5.8.9 3.5 0 x.5 8 3. 3.4 4.0 30 x 4 37 3.7 3.9 4.5 50 x 6 48 4. 4.4 5. 70 x 0 69 5. 5.4 6. 0 x 6 9 6.6 6.8 7.6 70 x 5 6 8.0 8.4 9.4 70 x 35 48 9.4 9.8.0 370 x 50 96.0.7 3.0 50 x 70 38 3.0 3.5 5.0 70 x 95 74 5.0 5.8 7.0 950 x 0 3 6.5 7. 8.5 90 Colour of stocked products Packaging : - Coil of 00 m for cross-section 6 mm - Cut on request for cross-section 5 mm Cables (mm ) Black Red Blue White Green/Yellow x 0.75 x x.5 x.5 x 4 x 6 x 0 x 6 x 5 x 35 x 50 x 70 Copyright April 03 - Nexans x 95 r Test Voltage 3600V AC 5 min immersed cable Minimum bending radius in fixed installations 4 x outer diameter 5 SPECIFIC APPLICATIONS CABLES

Application Motor supply cable for frequency converters controlled low voltage AC drives on ships, called VFD applications. MPRXCX EMC cables are designed with a special coverage, copper-polyester tape and braid, which provide a 00% EMC protection. Insulation with low dielectric constant is used to reduce reflected wave voltage peak magnitude. Symmetrical insulated ground wires, placed in corner, can reduce reflected wave and return common mode noisy currents back to the drive. Enhanced insulation is implement for 0.6/(.)kV cable to fulfill periodic peak voltage up to xu=kv due to harmonics..8/3(3.6)kv cable secure 3kV periodic peak voltage. These cables are used on board of ships in all locations for fixed installations. MPRXCX EMC and MPRXCX FLEXISHIP EMC Cables for variable frequency drives 0.6/(.) kv.8/3(3.6) kv Max conductor temperature: 90 C Design. Conductor Stranded or flexible bare copper Class or class 5. Insulation (enhanced) XLPE (cross-linked polyethylene) 3. Optionnal Return earth conductor 4. Inner covering Lapped or extruded 5. Screen/Armouring Copper/Polyester tape Bare copper braid 6. Outer sheath Polyolefin SHF Colour: black SHF on request 3 4 5 6 Marking NEXANS MPRXCX EMC Voltage «n» x «s» mm 90 C IEC 60 33- «year» * * + Metric Marking Core Identification 3 cores: black-grey-brown 4 cores: phases: black-grey-brown earth: split in 3 conductors Standards Construction & Design: IEC 608 IEC 6009-350 IEC 6009-353 Tests performances: IEC 6033-3- IEC 6033- IEC 60754-/60754- IEC 6034 Materials: IEC 6009-35 IEC 6009-359 Fire retardant IEC 6033-3- Flame retardant IEC 6033- Br Cl F Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- -30 to 80 C EMI High protection 6

MPRXCX EMC - 0.6/ (.) kv Cables (mm ) Permissible current rating in open air (A) Min. Outer diameter Nom. Max. Weight approx. (kg/km) 3 x 70 44 33.5 34.7 37.0 790 3 x 95 74 37.0 38.5 4.0 3 390 3 x 0 0 4.5 43.3 46.0 4 30 3 x 50 3 46.0 47.7 5.0 5 300 3 x 70 + 3 G 6 44 33.5 34.7 37.0 3 30 3 x 95 + 3 G 6 74 37.0 38.5 4.0 3 830 3 x 0 + 3 G 5 0 4.5 43.3 46.0 4 990 3 x 50 + 3 G 5 3 46.0 47.7 5.0 5 980 MPRXCX FLEXISHIP EMC - 0.6/ (.) kv Cables (mm ) Permissible current rating in open air (A) Min. Outer diameter Nom. Max. Weight approx. (kg/km) 3 x 70 44 35.0 36.6 39.0 3 00 3 x 95 74 40.0 4.3 44.0 3 870 3 x 0 0 44.5 46. 49.0 4 90 3 x 50 3 49.5 5.3 54.5 6 080 3 x 70 + 3 G 6 44 35.0 36.6 39.0 3 500 3 x 95 + 3 G 6 74 40.0 4.3 44.0 4 70 3 x 0 + 3 G 5 0 44.5 46. 49.0 5 50 3 x 50 + 3 G 5 3 49.5 5.3 54.5 6 680 MPRXCX FLEXISHIP EMC -.8/3 (3.6) kv Cables (mm ) Permissible current rating in open air (A) Min. Outer diameter Nom. Max. Weight approx. (kg/km) 3 x 70 44 38.5 39.8 4.5 3 350 3 x 95 74 44.0 45.6 48.5 4 380 3 x 0 0 47.0 48.6 5.0 5 70 3 x 50 3 5.0 5.9 56.5 6 90 3 x 70 + 3 G 6 44 38.5 39.8 4.5 3 750 3 x 95 + 3 G 6 74 44.0 45.6 48.5 4 780 3 x 0 + 3 G 5 0 47.0 48.6 5.0 5 770 3 x 50 + 3 G 5 3 5.0 5.9 56.5 6 890 Products on request Copyright April 03 - Nexans r Test Voltage Voltage test between phases conductors 5 kv in AC Minimum bending radius in fixed installations class 6 x outer diameter class 5 5 x outer diameter 7 SPECIFIC APPLICATIONS CABLES

MPRX CAB Cables for Cabins Application These cables are designed for cabin walls where space is limited, and needs reduced sized cables. 300/500V Max conductor temperature: 90 C Design. Conductor Flexible bare copper Class 5. Insulation XLPE (Cross linked Polyethylene) 3. Outer sheath SHF compound Colour: black 3 Marking NEXANS MPRX CAB 300/500 V 90 C «WW/YY» * * + Metric Marking Core Identification 3 cores: brown-blue-green/yellow Standards Construction & Design : IEC 608 Tests Performances IEC 6033-3- IEC 6033- IEC 60754-/60754- IEC 6034 Materials IEC 6009-35 IEC 6009-359 Br Cl F Fire retardant IEC 6033-3 Flame retardant IEC 6033- Halogen free IEC 60754- Low smoke IEC 6034 Flexible No toxicity No corrosivity IEC 60754- -30 to 80 C 8

MPRX -CAB - 300/500 V - Cables for Cabins Cables (mm ) Min. Outer diameter Nom. Max. Weight approx. (kg/km) 3 G.5 6.4 6.6 7. 90 3 G.5 7.3 7.6 8. 0 Products on request Test Voltage.5 kv in AC between cores r Minimum bending radius in fixed installations MPRX-CAB cl5 3 x outer diameter Copyright April 03 - Nexans 9 SPECIFIC APPLICATIONS CABLES

MPRX F 3 G.5 Application MPRX F cable type is used for lighting distribution on board of ships in all public areas complying with IEC standards 6009-35. MPRX F type withstands the IEC 6033-3- fire test on bunched cables and performs to the SOLAS requirements. All materials used to produce this cable are halogen free. This design ensures that non corrosive and low toxic gases are emitted in case of fire. Therefore, this cable type is especially designed for installations on passenger ships. 0.6/ (.) kv Max conductor temperature: 90 C Design. Conductor Stranded bare copper class. Insulation XLPE (cross linked polyethylene) 3. Outer sheath Polyolefin SHF Colour: green or red 3 Marking NEXANS MPRX F 0.6/kV 3 G.5 mm 90 C IEC 6033-3- «WW/YY» * * + Metric Marking Core Identification brown-green/yellow-blue Dimensions x 5 mm permissible current rating in open air: 6 A Standards Construction & Design: IEC 608 IEC 6009-350 Tests performances: IEC 6033-3- IEC 6033- IEC 60754-/60754- IEC 6034 Materials: IEC 6009-35 IEC 6009-359 Br Cl F Fire retardant IEC 6033-3- Flame retardant IEC 6033- Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- -30 + 80 C 30

BMKHC (I) Control Application Bus cable with integrated power supply for fixed installations in communication-radio, control and data processing facilities on ships and offshore units in all locations and open decks. 50/50 (300) V Max conductor temperature: 90 C Design. Control cores Stranded bare copper (class ) Cross section area: 0.75mm Insulation : XLPE (cross linked polyethylene) Insulation : XLPE (cross linked polyethylene) Colour white with black numbers Protective: green-yellow 3 a. Shielded (individual screened) Bare copper wire braid 4. Common covering Rubber compound 4 5. Centre element 3. Power cores Standed bare copper (class ) Cross section area:.5mm 5. Armouring Bare copper wire braid 6. Outer sheath Polyolefin SHF Colour: black 6 Marking NEXANS BMKHC (I) (xx0.75)c + 3G.5RM 50 V IEC 6033-3- «year» + Metric Marking Core Identification Power cores : white with printed number 3+ green/yellow Control cores : black-blue Standards Construction & Design: IEC 6009-350 IEC 6009-376 Tests performances: IEC 6033-3- IEC 6033- IEC 60754-/60754- IEC 6034 Materials: IEC 6009-35 IEC 6009-359 Br Cl F EMI Fire retardant IEC 6033-3- Flame retardant IEC 6033- Halogen free IEC 60754- Low smoke IEC 6034 No toxicity No corrosivity IEC 60754- -30 + 80 C 3

BMKHC (I) 50/50 (300) V - Control Cables (mm ) Min. Outer diameter Nom. Max. Weight approx. (kg/km) ( x x 0.75)C + 3G.5RM 7. 9.0 0.0 500 Test Voltage 500V AC r Minimum bending radius in fixed installations 6 x outer diameter Copyright April 03 - Nexans 33 SPECIFIC APPLICATIONS CABLES

CCTV Camera Cable Application This specific composite cables are designed to electronic equipment for CCTV camerasv. Halogen Free and Low smoke materials have been used to protect people and installations on board. Design. Triple AWG 6 Flexible tinned copper insulated with halogen free compound thin wall. Screened Pair AWG 0 Flexible tinned copper insulated with thin wall halogen free compound screen: aluminium/polyester tape and drain wire 3. Coaxial: 75 Ohms Type RG59U with halogen free sheath 4. General Screen Tinned copper braid 5. Outer sheath SHF compound Colour: green 6. Screened pair Flexible tinned copper insulated with thin wall halogen free compound Screen: tinned copper braid Sheath: halogen free 7. Coaxial: 75 Ohms Type RX6 with halogen free sheath 7 3 4 5 6 Marking NEXANS reference WW/YY Core Identification Triple AWG 6 black-brown-g/y (PI99) and yellow-white-blue (PJ399) Pair AWG 0 (PJ94) or red-white-blue (PJ399) n = green-yellow n = white-brown Pair AWG 0 (PJ399) white-blue Standards Tests performances: IEC 6033-3- IEC 6033- IEC 60754-/60754- IEC 6034 Materials: IEC 6009-359 Br Cl F Flame retardant IEC 6033-3- Fire retardant IEC 6033- Halogen free IEC 60754- Low smoke IEC 6034 Low toxicity Low corrosivity IEC 60754- -5 + 70 C 34

CCTV - Camera Cable Nexans reference Cable diameter Weight Approx. (kg/km) Minimum Bending Radius PI 99.5 / 3.5 5 30 PJ 399 9.4 / 0.6 50 00 Electrical Characteristics PI 99 PJ 399 TRIPLE (UNSCREENED) AWG 6 =.34 mm TRIPLE (UNSCREENED) AWG 4 =.08 mm Triple conductor electrical resistance at 0 C 3.7 Ω/km 8. Ω/km Triple voltage rate up to 50V up to 50V Triple core diameter.0 mm.60 mm SCREENED PAIR AWG 0 = 0.60 mm SCREENED PAIR AWG 0 = 0.60 mm Pair conductor electrical resistance at 0 C 33 Ω/km 33 Ω/km Pair voltage rate up to 50V up to 50V Pair core diameter.50 mm.50 mm COAXIAL 75 Ω type RG 59 U COAXIAL 75 Ω type KX6 Type Solid bare 0.8 mm 7 x 0.0 mm - Tinned copper Characteristic impedance 75 Ω ± 4 Ω 75 Ω ± 3 Ω at 00 MHz Conductor electrical resistance at 0 C 39 Ω/km - Nominal capacitance 54pF/km - Attenuation at 0 MHz.8 db/00m - 50 MHz 6. db/00m - 00 MHz 8.9 db/00m - 00 MHz.8 db/00m 0 db/00m 500 MHz 3.0 db/00m - Diameter - 6.0 mm ± 0.5 mm PI 99 :...................RG59 + ( x 0.6) + (3 x.34) PJ 399 :.....................KX6 + ( x 0.6) + (3 x.08) Copyright April 03 - Nexans 35 SPECIFIC APPLICATIONS CABLES

Copyright April 03 - Nexans This catalogue shows a general description of products which characteristics are not contratual in any case. NEXANS reserves the right to change specifications without prior notice. All total or partial reproduction, done without NEXANS authorization is unlawful.

Global expert in cables and cabling systems With energy at the basis of its development, Nexans, worldwide expert in the cable industry, offers an extensive range of cables and cabling solutions. The Group is a global player in the energy transmission and distribution, industry and building markets. Nexans addresses a wide series of market segments: from energy and telecom networks to energy resources (wind turbines, photovoltaic, oil and gas, and mining) to transportation (shipbuilding, aerospace, automotive and automation, and railways). Nexans is a responsible industrial company that regards sustainable development as integral to its global and operational strategy. Continuous innovation in products, solutions and services, employee development and commitment, customer orientation and the introduction of safe industrial processes with limited environmental impact are among the key initiatives that place Nexans at the core of a sustainable future. With an industrial presence in 40 countries and commercial activities worldwide, Nexans employs 5,000 people and had sales in 0 of nearly 7. billion euros. Nexans is listed on NYSE Euronext Paris, compartment A. For more information, please consult: www.nexans.com For further information, please contact us at: Copyright April 03 - Nexans Document printed on paper 00% Cert. N PEFC/0-3-587 from sustainably-managed forest. www.nexans.com www.nexans.com/shipbuilding