Broadband communication Technical description
Summary Product description 4 Installable via Plug and Play 5 Perspectives and Chances on the Market 5 Economic and Political Perspectives 6 Unique Selling Points 6 Technical Variantes 7 Data sheet TECHNIK START-LIGHT 8 Data sheet TECHNIK PRE-LIGHT 9 Data sheet TECHNIK FUSION-LIGHT 10
Product description RadioLED is a multifunctional streetlight which corresponds to most current technical standards. A combination of street lighting and broadband communication give nearly every area the possibility to get easily connected to high performance high performance broadband network. Offering high speed internet access to inhabitants and local companies is connected to many economic and political requirements. Realizing this without disadvantages and high operating expenses like for example caused by installing a buried cable is a revolutionary technical achievement. A street lamp post with LED illuminant contains the centerpiece, namely a special control system which is base technology for broadband communication. Maintenance and additional services are controlled in a central technical system administration. The LED revolution in the light technology increases the durability of an illuminant and makes maintenance services easier. LED has become an important semiconductor component for status display in the last decades in the electronic industry. LED is also used for analog and digital signal transmission. LED has also proved its advantages in the construction of traffic lights. From a technical point of view LED light is generated through a interaction of positive and negative charging in a semiconductor crystal and is nearly monochrome. Thanks to RadioLED the maintenance effort significantly decreases due to an automatic error reporting/ feedback, a remote control of the system and the status of the lights, the durability of the illuminant LED and the consistent and directed change of the light quantity which also increases the durability of the lamp. Different lighting conditions can be produced by using a demand directed dimmer and sensor system combined with a scene programming. The LED technology also makes possible a directed refraction of light as well as a change in coloure. For instance, it is possible to light up a crossroad in a way that pedestrians and bicycle riders are less likely to be overseen by a car driver. The measurement of the current light situation makes possible the automatic adjustment of the illumination by the used lamp. Saving of energy and cost reduction are consequences of this technical function. Acting globally
Installable via plug & play Lightshow and audio engineering for events (e.g. christmas markets, town festivity Event information on screens Centrally controlled observation and panorama cameras Traffic light pre-emption, measurements of traffic density, day/night and weather connected displays. All traffic signs can be shown on connected screens (e.g. construction work, dangerous spots etc.) Digital info points, emergency call, taxi call, bus schedules, tourism and advertising information, charging station for electro cars. Connection possibility for different digital parking ticket vending machine On-Demand transmission via mobile phone and helmet camera, etc. Perspektivs and Chances on the Market Due to the economic circumstances the legislator has to act, modernizing the municipal street lights significantly contributes to energy reduction and to the improvement of illumination quality. The EU-Regulation 245/2009 includes requirements concerning the environmentally friendly construction of luminescent screen tubes. Therefore, the metal vapor lamps which have been used before will be prohibited. This regulation has an influence on the market situation and RADIOLED is therefore the best and only solution. From 2012 to 2017 the used luminescent screen tubes have to fulfill a specific efficiency criteria. The luminescent screen tubes (T12-38mm), high pressure mercury vapor lamps and high pressure sodium vapor lamps which have been used until now will be forbidden in a defined period of time. Only electronic controller units are allowed to be used. Financing and promotion support are important factors when it comes to realizing a project. In order to fulfill the regulations of the legislator there are financing models and promotional funds. Requires integrated thinking.
Economic and Political Perspectives Municipal independence to install the broad band network Municipal autonomy of decision leads to fast realization The needs of the region and the citizens can be taken into account individually. Rurale regions can be opened up innovatively and economically. Thanks to the broad band communication even rural areas become attractive location for companies of every size. Workplaces in rural regions relieve the traffic network; current situation: concentration of workplaces in big cities. RadioLED offers a goal and future oriented solution to solve the problem of high concentration of workplaces in big cities. Transparency for all people involved regarding technical standards and economic efficiency. Technical upgradings can be implemented easily and are modularly expandable. Individual poles guarantee an attractive design as well as individual adjustment to the architecture of the different areas. Unique Selling Points Developing an area-wide broad band network Wireless laying no excavation are necessary Current standardized energy management (e.g. directed illumination and dimming) Light smog can be minimized thanks to technical possibilities and the significantly more directed use of illumination. More safety in road traffic Modulare and service-friendly concept Cartographic presentation of all lamps with error reporting External interface to integrate measurement techniques, sensors for different areas, cameras and screens, etc. Highlight for events (light shows, colors, effects, etc.) Areawide broad band access improves the economic development of different areas and industries. A big part of the society benefits from this technology along the value chain Winning Technology
Technical Variante FUSION-LIGHT Lamp with LED & Antenna & Mobile communication Technology PRE-LIGHT lamp with LED & antenna technology START-LIGHT Lamp with LED Technology broadband prepared lamp broadband communication lamp GSM/UMTS/LTE Remote- Unit for Multi-Operator Basis Light integrated antenna IP Connection LED as well as integrated and centrally assessable individual brightness control individual brightness control central control of operating state customer specific antenna characteristics upgrading possibilities integrated design of the antenna Multi-Adapter USB, LAN, NFC, Bluetooth Capacity routing & Power management Integrated Wireless LAN High quality Future oriented innovativ and revolutionary
TECHNIK START-LIGHT Electronic for lights Technical dates Application General information input voltage (VAC) Electronic for marketable street lighting with or without LED with use in adjustable electric and voltage range, and centrally control about current protocol.investigated to European standards output power output voltage (VDC) adjustable output circuit (IDC) adjustable in 256 levels 110V... 240V ±10%, 50Hz... 60Hz 90W range of tolerance ±2% 0V... 110V standby-use / standby applicaten rate < 0,1W PFC power factor 100mA... 2100mA active THD < 10% efficiency 0.92 interface cable interface radio Mechanic operating temperature -30 C... +75 C case temperature 80 C surface moisture (operation) storage temperature surface moisture (storage) access cable anchorage dimensions (l/b/h) weight Savety protection class I protection device degree of protection >0,97 over the entire power range DALI, DSI, KNX, PowerLine, RS232/485, USB 2.0, LAN 10/100/1000 QUAD Band GSM/GPRS/UMTS/LTE, WLAN 802.11 b/g/n, ZigBee, Bluetooth 4.0 (Low Energy) RF-ID, NFC 10%... 90% RH -40 C... +85 C 5%... 95% RH clip from 0,75mm2... 1,5mm2 integrated 270mm x 80mm x 50mm ca. 410g short circuit, idle time, excess voltage IP 20 to be bueild in outdoor housing min. IP56 Norm reliability EN 61347-1:2008 / A1:2011 / EN 61347-2-13:2006 Type EMV EN 55015:2006 / A1:2007 / A2:2009 / EN 61547:2009 CE RoHS TECHNIK START-LIGHT electronic for lights article number TSL-014 yes yes 1
TECHNIK PRE-LIGHT Broadband communication ready electronic for lights Technical dates Application General information input voltage (VAC) Electronic for marketable street lighting with or without LED with use in adjustable electric and voltage range, and centrally control about current protocol. Prepared for update with a mobile communication base station. Investigated to European standards output power output voltage (VDC) adjustable output circuit (IDC) adjustable in 256 levels 110V... 240V ±10%, 50Hz... 60Hz 90W range of tolerance ±2% 0V... 110V standby-use / standby applicaten rate < 0,1W PFC power factor 100mA... 2100mA active THD < 10% efficiency 0.92 >0,97 over the entire power range interface cable DALI, DSI, KNX, PowerLine, RS232/485, USB 2.0, LAN 10/100/1000 interface radio Antenna antenna technology 450kHz... 6GHz cable QUAD Band GSM/GPRS/UMTS/LTE, WLAN 802.11 b/g/n, ZigBee, Bluetooth 4.0 (Low Energy) RF-ID, NFC koaxial Mechanic operating temperature -30 C... +75 C case temperature 80 C surface moisture (operation) storage temperature surface moisture (storage) access cable anchorage dimensions (l/b/h) weight Savety protection class I protection device degree of protection 10%... 90% RH -40 C... +85 C 5%... 95% RH clip from 0,75mm2... 1,5mm2 integrated 270mm x 80mm x 50mm ca. 410g short circuit, idle time, excess voltage IP 20 to be bueild in outdoor housing min. IP56 Norm reliability EN 61347-1:2008 / A1:2011 / EN 61347-2-13:2006 EMV EN 55015:2006 / A1:2007 / A2:2009 / EN 61547:2009 CE yes Type RoHS TECHNIK PRE-LIGHT electronic for lights article number TPL-014 yes 1
TECHNIK FUSION-LIGHT Broadband communication electronic for lights Technical dates Application Electronic for marketable street lighting with or without LED with use in adjustable electric and voltage range, and centrally control about current protocol. Integrated mobile communication base station. Investigated to European standards General information input voltage (VAC) 110V... 240V ±10%, 50Hz... 60Hz output power output voltage (VDC) adjustable output circuit (IDC) adjustable in 256 levels 90W range of tolerance ±2% 0V... 110V standby-use / standby applicaten rate < 0,1W PFC 100mA... 2100mA active power factor >0,97 over the entire power range THD < 10% efficiency 0.92 interface cable interface radio Antenna antenna technology 450kHz... 6GHz cable DALI, DSI, KNX, PowerLine, RS232/485, USB 2.0, LAN 10/100/1000 QUAD Band GSM/GPRS/UMTS/LTE, WLAN 802.11 b/g/n, ZigBee, Bluetooth 4.0 (Low Energy) RF-ID, NFC koaxial Mobile communication basis station range transmission power routing and powermanagement 10m... 500m < 1W Mechanic operating temperature -30 C... +75 C case temperature 80 C surface moisture (operation) storage temperature surface moisture (storage) access cable anchorage dimensions (l/b/h) weight Savety protection class I protection device degree of protection 10%... 90% RH -40 C... +85 C 5%... 95% RH clip from 0,75mm2... 1,5mm2 integrated 270mm x 80mm x 50mm ca. 410g short circuit, idle time, excess voltage IP 20 to be bueild in outdoor housing min. IP56 Norm reliability EN 61347-1:2008 / A1:2011 / EN 61347-2-13:2006 Type EMV EN 55015:2006 / A1:2007 / A2:2009 / EN 61547:2009 CE yes RoHS TECHNIK FUSION-LIGHT electronic for lights yes article number TFL-014 1
RADIOLED Tel +43(0)664/3170202 E-Mail andreas.strasser@radioled.eu