SMT Opto-Device & Custom LED SMD Type NIR LED SMT High Performance NIR TOP IR LED SMT consists of an InGaAsP LED mounted on the lead frame as TOP LED package, and is sealed with epoxy resin. It emits a spectral band of radiation at nm. Specifications Outer dimension (Unit: mm) ) Product Name TOP NIR LED ) Type No. SMT ) Chip () Chip Material InGaAsP () Peak Wavelength nm typ. ) Package () Lead Frame Die Silver Plated () Package Resin PAT () Lens Epoxy or Silicone resin Absolute Maximum Ratings [Ta= C] Item Symbol Maximum Rated Value Unit Power Dissipation PD mw Forward Current IF ma Pulse Forward Current IFP ma Reverse Voltage VR V Thermal Resistance Rthja K/W Junction Temperature Tj C Operating Temperature TOPR - ~ + C Storage Temperature TSTG - ~ + C Soldering Temperature TSOL C Pulse Forward Current condition: Duty=% and Pulse Width=us. Soldering condition: Soldering condition must be completed within seconds at C Electro-Optical Characteristics [Ta= C typ.] Item Symbol Condition Minimum Typical Maximum Unit Forward Voltage VF IF=mA.. VFP IFP=mA. V Radiated Power PO IF=mA IFP=mA mw Radiant Intensity IE IF=mA - IFP=mA - mw/sr Peak Wavelength P IF=mA nm Half Width IF=mA nm Viewing Half Angle IF=mA ± deg. Rise Time tr IF=mA ns Fall Time tf IF=mA ns Radiated Power is measured by G-. Radiant Intensity is measured by Ando Optical Multi Meter AQ & AQ. EPITEX INC.: - Minami-Kawabe Cho, Higashi-Kujyo, Minami-Ku, Kyoto, Japan Tel: ++--- Fax: ++---
Opto-Device & Custom LED SMD Type NIR LED SMT Forward Current (ma) Forward Curent - Forward Voltage (ta= C, tw=ms, Duty=%). Relative Radiant Intensity - Forward Current (ta= C, tw=ms, Duty=%) ma Standard......... Forward Voltage (V)... Forward Current (ma) Forward Current - Pulse Duration Allowable Forward Current - Ambient Temperature Forward Current Ifp [ma] khz khz Hz Hz Hz Allowable Forward Current (ma) Rthja=K/W - - - Duration tw [ms] Ambient Temperature ( C) EPITEX INC.: - Minami-Kawabe Cho, Higashi-Kujyo, Minami-Ku, Kyoto, Japan Tel: ++--- Fax: ++---
Opto-Device & Custom LED SMD Type NIR LED SMT Forward Voltage (V).......... Forward Voltage - Ambient Temperture If=mA Relative Radiant Intensity - Ambient Temperature If=mA. Ambient Temperatture ( C). Ambient Temperature ( C) Peak Wavelength - Ambient Temperature If=mA Peak Wavelength (nm) Ambient Temperature ( C) EPITEX INC.: - Minami-Kawabe Cho, Higashi-Kujyo, Minami-Ku, Kyoto, Japan Tel: ++--- Fax: ++---
Opto-Device & Custom LED SMD Type NIR LED SMT Relative Spectral Emission Radiation Characteristics.......... (ta= C)......... ±. Wavelength (nm) - - - Angle (deg.) Radiation Characteristics - - - - ± Angle (deg.) - - - - -.................. EPITEX INC.: - Minami-Kawabe Cho, Higashi-Kujyo, Minami-Ku, Kyoto, Japan Tel: ++--- Fax: ++---
Opto-Device & Custom LED SMD Type NIR LED SMT SMD Application Recomended Lnd Layout (Unit : mm) IR-Reflow Soldering Profile for lead free soldering C Temperature [ C] C C MAX s s s s s Time [s] SMD Packing Tape and Reel Dimensions (Unit: mm) Wrapping Moisture barrier bag aluminum laminated film with a desiccant to keep out the moisture absorption during the transportation and storage. EPITEX INC.: - Minami-Kawabe Cho, Higashi-Kujyo, Minami-Ku, Kyoto, Japan Tel: ++--- Fax: ++---
Opto-Device & Custom LED SMD Type NIR LED SMT Disclaimer Product specifications and data shown in this product catalog are subject to change without notice for the purposes of improving product performance, reliability, design, or otherwise. Product data and parameters in this catalog are typical values based on reasonably up-to-date measurements. Product data and parameters may vary by user application and over time. Products shown in this catalog are intended to be used for general electronic equipment. Products are not guaranteed for applications where product malfunction or failure may cause personal injury or death, including but not limited to life-supporting / saving devices, medical devices, safety devices, airplanes, aerospace equipment, automobiles, traffic control systems, and nuclear reactor control systems. EPITEX INC.: - Minami-Kawabe Cho, Higashi-Kujyo, Minami-Ku, Kyoto, Japan Tel: ++--- Fax: ++---.