krog
krog Customers can be divided into various groups. One way krog is simple and cheap furniture in the best sense of desk shelves and accessories, making the table-top vivid. to divide them is to look at the word. All you need is The elongated visual their main criteria for buying there and you will not have language has been a furniture. to pay more just for design. deliberate choice to fulfil the krog consists of big parts: wishes of Thulema s open- There are the so-called desks and auxiliary surfaces minded customers and offer Beautiful Customers who functioning as storage units, a modern and elegantly consider their image and forming three-dimensional minimalistic solution to more message conveyed to be of workstation architecture. demanding customers. great importance these There is nothing excessive in So that Thulema s mass people employ an interior this range of furniture, but production would be a designer and buqy beautiful the needs of a busy worker in worthy representative of our furniture. The second group an open or private office are work. could be called the Wise met. Customers. They know what Martin Pärn, they want and buy furniture In its practical and designer according to their needs. The minimalistic way krog goes third type is the Practical well with other products of Customers who are so busy Thulema such as Moi dealing with themselves that cabinets and Modul shelves. buying furniture is krog can also be used in a big considered as an unpleasant office to alleviate Thor s necessity to be solved as strictness and seriousness by quickly as possible at minimal furnishing the back office cost. more modestly. Although these types of Despite the lack of detail, customers cannot be krog still allows to achieve a approached similarly, krog wide range of solutions from will attempt to do it along conservative to trendy. The with the rest of Thulema s ideology of the krog range is products. most clearly expressed in
Classic square work desk. The cabinet with a sliding door as an auxiliary surface creates a multilevel workstation.
Desks with broken shape facilitate communication with the customer and are perfect for working with a flat-screen monitor. The practical desk shelf is a vivid addition to the workstation. The auxiliary surface with a drawer unit provides more space under the table. Two matching workstations, one of which has an additional customer surface.
Work desk with a deep corner creates two zones for working with papers and a computer. The small partition shield covers the back of the monitor and the cables. The cabinet with a sliding door as an auxiliary surface creates a multilevel workstation. The customer surface can be attached to the drawer unit in two ways. The drawer unit on castors can be relocated according to need.
Modern writing desk with traditional features suitable for an office. The vertical drawer takes very little space. The front shield offers workers greater privacy.
FINISH krog series furniture is manufactured from resilient melamine-coated boards that are easy to care for. Its main boards and auxiliary surface top boards are 22 mm thick and available in seven varieties of finish: white, basalt grey, steel grey, olive, birch, beech and hazelnut. Melamine Colour White Light grey Dark grey Basalt grey Steel grey Olive Birch Beech Hazelnut White Grey Cream Salad Brick Violet The drawer unit and the body of the auxiliary surface are made from 19 mm thick board. You can choose between a white, light or dark grey finish. Metal legs Body and drawer unit Accessories (desk and file shelves, front and partition shields, auxiliary surface cabinet doors and customer surface KR-R desk boards) are made from resilient MDF boards that are 12 mm thick and available in four colours: cream, brick, salad and violet. The metal details are grey or white. Work surfaces Accessories (desk and file shelves, front and partition shields, auxiliary surface cabinet doors and customer surface KR-R desk boards) All materials conform to international standards. METAL LEGS The colours depicted in the photos are for illustrative purposes only. White Grey BODY AND DRAWER UNIT White Light grey Dark grey WORK SURFACES White Basalt grey Steel grey Olive Birch ACCESSORIES Beech Hazelnut Cream Brick Salat Violet
WORK SURFACES CUSTOMER SURFACES AUXILIARY SURFACES METAL FRAME The krog series features four work surfaces in different shapes and lengths: Square KR-N: 1600, 1, 2000 mm. KR-L with a computer corner: 1350, 1600, 1, 2000 mm. Writing desk work surface KR-M: 1 mm. KR-C with a customer corner: 1, 2000 mm. The height of the work desk is 740 + 10 mm. One side of the work surface always rests on either the auxiliary surface or drawer unit, and cable access is provided. A customer surface integrated into a work surface creates extra room for communication. KR-R is attached to the leg frame of the work desk. KR-D and KR-T are either attached to the leg frame of the work desk or rest on the drawer unit. KR-O is a separate customer surface that is supported by a trumpet leg. KR-T is a customer surface shared by two workstations. There are three kinds of auxiliary surfaces: Simple KR-A1 auxiliary surface, to which a KR-K1 file shelf can be connected. KR-A2 auxiliary surface with a KR-ASB3 drawer unit. KR-A3 auxiliary surface with a cabinet has one sliding door. The finish of the auxiliary surface top board is the same as the work surface. The auxiliary surface is lower than the work surface. The KR-J leg frame provides the workstation with a unique look and a strong construction. The frame does not prevent the addition of a keyboard drawer to the desk. This kind of customer surface makes sitting at a small desk comfortable. The height of the leg is adjustable. Work surface KR-N Work surface KR-L Leg KR-J 2000 2000 2000 1 727 Ø460 M 1 : 50 Work surface KR-M Work surface KR-C Customer surfaces 1 900 1600 1600 1350 1350 KR-N/20 KR-L/20 P KR-L/20 V 762 KR-L/18 P KR-L/18 V KR-L/16 P KR-L/16 V KR-L/14 P KR-L/14 V 2000 2000 540 540 428 KR-C/20 P KR-C/20 V 1 1 KR-D P KR-D V 1652 Ø 600 1200 KR-T 700 740 1 1 KR-N/18 1600 KR-N/16 Trumpet leg KR-C/18 P KR-C/18 V KR-R/6 KR-O/12
DRAWER UNITS DESK AND FILE SHELVES FRONT AND PARTITION SHIELDS There are three types of drawer units that support work surfaces: KR-SB1 is a new solution with one upright drawer. It takes up the least amount of room and includes a frame for hanging files. KR-SB4 with four standard drawers. KR-SB3 features one drawer with space for hanging files and two ordinary drawers. Placement of the drawer unit under the auxiliary surface leaves more space for a small work surface. KR-ASB3 drawer unit under the auxiliary surface is made up of three small drawers. Drawer units on castors also leave more space for a small work surface, as it is easy to change their location. There are two types of drawer units on castors: KR-SBR3 with three standard drawers. KR-SBR2 with one standard drawer and one drawer for hanging files. Drawer units include a drawer for pens. Drawer units are also available as lockable options (except KR-ASB3). Dividers and CD holders can be purchased to be installed inside the drawers. KR-LR1 is a simple desk shelf for files or papers. KR-LR2 is a file shelf with support. KR-K1 is a file shelf suitable for installation beneath an auxiliary or on a work surface. Shelves are not fixed to the desks but can be placed on the work or auxiliary surfaces as required. The 1100 mm wide front shield KR-EK1 provides sufficient shielding for the base of desks in various sizes. The front shield is attached to the work surface. If a job requires concentration and seclusion, the most suitable shield is the KR-VK1. The partition shield can be regulated to two heights. KR-VK2 is designed to shield monitors. Drawer unit KR-SB1 P KR-SB1L* P Drawer unit KR-SB1 V KR-SB1L* V Drawer unit Drawer unit KR-SB3 KR-SB4 L* lockable KR-SB3L* KR-SB4L* L* llockable Desk shelf KR-LR1 600 220 178 782 430 602 File shelf KR-LR2 340 280 687 718 File shelf KR-K1 600 360 Drawer unit on castors KR-SBR2 KR-SBR3 KR-SBR2L* KR-SBR3L* 434 434 L* lockable 606 Auxiliary surface KR-A1 P KR-A1 V 1620 Auxiliary surface with cabinet KR-A3 P KR-A3 V 1620 420 617 617 620 Auxiliary surface drawer unit KR-ASB3 418 419 Auxiliary surface KR-A2 P 1620 Auxiliary surface KR-A2 V 1620 420 598 620 Drawer unit KR-ASB3 Drawer unit KR-ASB3 1100 1100 400 580 350 1100 70 350 Work surface 490 770 Partition shield KR-VK1 Partition shield KR-VK1 Front shield KR-EK1 Partition shield KR-VK2
Thulema Pärnu mnt 158 11317 Tallinn Estonia Phone +372 651 8118 thulema@thulema.ee KIT Kaluste OY Tikkurilantie 136 01510 Vantaa Finland GSM +358 400 449 799 finland@thulema.ee www.thulema.ee Vincent: 06-ENG-02.2011