EUG150SxxxDV Features Ultra High Efficiency (Up to 93.5%) Full Power at Wide Output Current Range (Constant Power) 05V/010V/PWM/Timer Dimmable Input Surge Protection: 6kV lineline, 10kV lineearth AllAround Protection: OVP, SCP, OTP Waterproof (IP67) SELV Output Suitable for Independent Use 7 Years Warranty Description The EUG150SxxxDV series is a 150W, constantcurrent, programmable LED driver that operates from 90305 Vac input with excellent power factor. It is created for many lighting applications including high bay, tunnel and roadway lights. The high efficiency of these drivers and compact metal case enables them to run cooler, significantly improving reliability and extending product life. To ensure troublefree operation, protection is provided against input surge, output over voltage, short circuit, and over temperature. Models Adjustable Output Current Range FullPower Current Range (1) Default Output Current Input Voltage Range(2) Output Voltage Range Max. Output Power Typical Efficiency (3) Power Factor 120Vac 220Vac Model Number (4) 45700mA 90~305 Vac 450700mA 530 ma 117~333Vdc 150 W 100~250 Vdc 93.5% 0.99 0.96 EUG150S070DV 90~305 Vac 701050mA 7001050mA 700 ma 75~214Vdc 100~250 Vdc 150 W 93.5% 0.99 0.96 EUG150S105DV 90~305 Vac 1402100mA 14002100mA 1400 ma 38~107Vdc 100~250 Vdc 150 W 92.5% 0.99 0.96 EUG150S210DV(5) 90~305 Vac 2453500mA 24503500mA 3150 ma 22 ~ 61Vdc 100~250 Vdc 150 W 92.0% 0.99 0.96 EUG150S350DV(5) 90~305 Vac 3855600mA 38505600mA 4200 ma 14 ~ 39Vdc 100~250 Vdc 150 W 92.0% 0.99 0.96 EUG150S560DV(5) Notes: (1) Output current range with constant power at 150W (2) Certified Voltage range: 100240Vac or 100250Vdc (except CCC, PSE, KS and BIS). (3) Measured at full load and 220Vac input (see below General Specifications for details). (4) All the models are certificated to KS, except EUG150S070DV (5) SELV Output. 1 / 14 www.inventronicsco.com Tel: 8657156565800 Fax: 8657186601139 sales@inventronicsco.com
EUG150SxxxDV EUG150S070DV IV Operation Area EUG150S105DV EUG150S210DV EUG150S350DV EUG150S560DV 2 / 14 www.inventronicsco.com Tel: 8657156565800 Fax: 8657186601139 sales@inventronicsco.com
EUG150SxxxDV Input Specifications Parameter Min. Typ. Max. Notes Input Voltage 90 Vac 305 Vac 100250Vdc Input Frequency 47 Hz 63 Hz Leakage Current 0.70 ma IEC605981; 240Vac/ 60 Hz Input AC Current Inrush Current(I 2 t) 1.98 A 2 s PF 0.9 THD 20% THD 10% Output Specifications 1.87 A Measured at full load and 100 Vac input. 0.81 A Measured at full load and 220 Vac input. At 220Vac input, 25 cold start, duration=712 μs, 10%Ipk10%Ipk. See Inrush Current Waveform for the details. At 100240Vac, 5060Hz, 60%100% Load (90150 W) At 220240Vac, 5060Hz, 75%100% Load (112.5150 W) Parameter Min. Typ. Max. Notes Output Current Tolerance 5%Ioset 5%Ioset At full load condition Output Current Setting(Ioset) Range EUG150S070DV EUG150S105DV EUG150S210DV EUG150S350DV EUG150S560DV Output Current Setting Range with Constant Power EUG150S070DV EUG150S105DV EUG150S210DV EUG150S350DV EUG150S560DV Total Output Current Ripple (pkpk) Output Current Ripple at < 200 Hz (pkpk) 45 ma 70 ma 140 ma 245 ma 385 ma 450 ma 700 ma 1400 ma 2450 ma 3850 ma 700 ma 1050 ma 2100 ma 3500 ma 5600 ma 700 ma 1050 ma 2100 ma 3500 ma 5600 ma 5%Iomax 10%Iomax At full load condition, 20 MHz BW 2%Iomax Startup Overshoot Current 10%Iomax At full load condition No Load Output Voltage EUG150S070DV EUG150S105DV EUG150S210DV EUG150S350DV EUG150S560DV 370 V 235 V 120 V 75 V 48 V At full load condition. Only this component of ripple is associated with visible flicker. Line Regulation ±0.5% Measured at full load Load Regulation ±1.5% 3 / 14 www.inventronicsco.com Tel: 8657156565800 Fax: 8657186601139 sales@inventronicsco.com
EUG150SxxxDV Output Specifications (Continued) Parameter Min. Typ. Max. Notes Turnon Delay Time Temperature Coefficient of Ioset 1.0 s 0.5 s 12V Auxiliary Output Voltage 10.8 V 12 V 13.2 V 12V Auxiliary Output Source Current Measured at 120Vac input, 60%100% Load Measured at 220Vac input, 60%100% Load 0.03%/ C Case temperature = 0 C ~Tc max 0 ma 20 ma Return terminal is Dim Note: All specifications are typical at 25 C unless otherwise stated. General Specifications Parameter Min. Typ. Max. Notes Efficiency at 120 Vac input: EUG150S070DV Io= 450 ma Io= 700 ma EUG150S105DV Io= 700 ma Io=1050 ma EUG150S210DV Io=1400 ma Io=2100 ma EUG150S350DV Io=2450 ma Io=3500 ma EUG150S560DV Io=3850 ma Io=5600 ma Efficiency at 220 Vac input: EUG150S070DV Io= 450 ma Io= 700 ma EUG150S105DV Io= 700 ma Io=1050 ma EUG150S210DV Io=1400 ma Io=2100 ma EUG150S350DV Io=2450 ma Io=3500 ma EUG150S560DV Io=3850 ma Io=5600 ma 87.5% 87.0% 88.0% 87.0% 87.0% 87.0% 87.0% 86.5% 86.5% 85.0% 91.5% 91.5% 88.5% 91.0% 89.5% 89.5% 88.0% 93.5% 92.5% 93.5% 92.5% 92.5% 92.0% 92.0% 92.0% 92.0% Measured at full load and steadystate temperature in 25 C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Measured at full load and steadystate temperature in 25 C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) 4 / 14 www.inventronicsco.com Tel: 8657156565800 Fax: 8657186601139 sales@inventronicsco.com
EUG150SxxxDV General Specifications (Continued) Parameter Min. Typ. Max. Notes Efficiency at 277 Vac input: EUG150S070DV Io= 450 ma Io= 700 ma EUG150S105DV Io= 700 ma Io=1050 ma EUG150S210DV Io=1400 ma Io=2100 ma EUG150S350DV Io=2450 ma Io=3500 ma EUG150S560DV Io=3850 ma Io=5600 ma 92.0% 91.0% 91.5% 91.0% 91.0% 88.5% MTBF Lifetime Operating Case Temperature for Safety Tc_s Operating Case Temperature for Warranty Tc_w 94.0% 93.0% 93.5% 93.0% 93.0% 92.0% 92.5% 92.5% 92.0% 271,000 Hours 99,000 Hours 40 C +90 C 40 C +75 C Measured at full load and steadystate temperature in 25 C ambient; (Efficiency will be about 2.0% lower if measured immediately after startup.) Measured at 220 Vac input, 80%Load and 25 C ambient temperature (MILHDBK 217F) Measured at 220 Vac input, 80%Load and 70 C case temperature; See lifetime vs. Tc curve for the details Case temperature for 7 years warranty. Please see Inventronics Warranty Statement for complete details. Storage Temperature 40 C +85 C Humidity: 5%RH to 100%RH Dimensions Inches (L W H) Millimeters (L W H) 7.40 2.66 1.56 188 67.5 39.7 Net Weight 1100 g Note: All specifications are typical at 25 C unless otherwise stated. Dimming Specifications With mounting ear 8.23 2.66 1.56 209 67.5 39.7 Parameter Min. Typ. Max. Notes Absolute Maximum Voltage on the Vdim (+) Pin Source Current on Vdim (+)Pin Dimming Output Range EUG150S070DV EUG150S105DV EUG150S210DV EUG150S350DV EUG150S560DV EUG150S070DV EUG150S105DV EUG150S210DV EUG150S350DV EUG150S560DV 20 V 20 V 200 ua 300 ua 450 ua Vdim(+) = 0 V 10%Ioset Ioset 45 ma 70 ma 140 ma 245 ma 385 ma Ioset 450 ma Ioset 700 ma 700 ma Ioset 1050 ma 1400 ma Ioset 2100 ma 2450 ma Ioset 3500 ma 3850 ma Ioset 5600 ma 45 ma Ioset < 450 ma 70 ma Ioset < 700 ma 140 ma Ioset < 1400 ma 245 ma Ioset < 2450 ma 385 ma Ioset < 3850 ma 5 / 14 www.inventronicsco.com Tel: 8657156565800 Fax: 8657186601139 sales@inventronicsco.com
EUG150SxxxDV Dimming Specifications (Continued) Parameter Min. Typ. Max. Notes Recommended Dimming Range for 05V Recommended Dimming Range for 010V 0 V 5 V Dimming mode set to 05V in PC interface. 0 V 10 V Default 010V dimming mode with positive logic. PWM_in High Level 3 V 10 V PWM_in Low Level 0.3 V 0.6 V PWM_in Frequency Range 200 Hz 2 KHz Dimming mode set to PWM in PC interface. PWM_in Duty Cycle 1% 99% Note: All specifications are typical at 25 C unless otherwise stated. Safety &EMC Compliance Safety Category Standard CE EN 613471, EN61347213 KS KS C 7655 EMI Standards EN 55015 (1) EN 6100032 EN 6100033 EMS Standards EN 6100042 EN 6100043 EN 6100044 Notes Conducted emission Test &Radiated emission Test Harmonic current emissions Voltage fluctuations & flicker Notes Electrostatic Discharge (ESD): 8 kv air discharge, 4 kv contact discharge RadioFrequency Electromagnetic Field Susceptibility TestRS Electrical Fast Transient / BurstEFT EN 6100045 Surge Immunity Test: AC Power Line: line to line 6 kv, line to earth 10 kv (2) EN 6100046 EN 6100048 EN 61000411 EN 61547 Conducted Radio Frequency Disturbances TestCS Power Frequency Magnetic Field Test Voltage Dips Electromagnetic Immunity Requirements Applies To Lighting Equipment Note: (1) This LED driver meets the EMI specifications above, but EMI performance of a luminaire that contains it depends also on the other devices connected to the driver and on the fixture itself. (2) To perform electric strength (hipot) testing, the GDT ground disconnect (nut and metal lock sheet) on the driver endcap should be removed temporarily to prevent the internal gas discharge tube from conducting (as allowed by IEC 605981 Clause 10.2). After testing is completed, these items must be reinstalled to restore linetoearth surge protection and secure the end cap. 6 / 14 www.inventronicsco.com Tel: 8657156565800 Fax: 8657186601139 sales@inventronicsco.com
EUG150SxxxDV Lifetime vs. Case Temperature Inrush Current Waveform Efficiency vs. Load EUG150S070DV(Io=450mA) EUG150S070DV(Io=700mA) 7 / 14 www.inventronicsco.com Tel: 8657156565800 Fax: 8657186601139 sales@inventronicsco.com
EUG150SxxxDV EUG150S105DV(Io=700mA) EUG150S105DV(Io=1050mA) EUG150S210DV(Io=1400mA) EUG150S210DV(Io=2100mA) EUG150S350DV(Io=2450mA) EUG150S350DV(Io=3500mA) 8 / 14 www.inventronicsco.com Tel: 8657156565800 Fax: 8657186601139 sales@inventronicsco.com
EUG150SxxxDV EUG150S560DV(Io=3850mA) EUG150S560DV(Io=5600mA) Power Factor Total Harmonic Distortion 9 / 14 www.inventronicsco.com Tel: 8657156565800 Fax: 8657186601139 sales@inventronicsco.com
EUG150SxxxDV Protection Functions Parameter Over Temperature Protection Short Circuit Protection Over Voltage Protection Notes Decreases output current, returning to normal after over temperature is removed. Auto Recovery. No damage will occur when any output is short circuited. The output shall return to normal when the fault condition is removed. Limits output voltage at no load and in case the normal voltage limit fails. Dimming 05V Dimming The recommended implementation of the dimming control is provided below. Implementation 1: Positive logic Implementation 2: Negative logic Notes: 1. The dimmer can also be replaced by an active 05V voltage source signal or passive components like resistors and zener. 2. Do NOT connect Dim to the output V or V+, otherwise the driver will not work properly. 3. If 05V dimming is not used, Dim + should be open. 4. When 05V negative logic dimming mode and Dim+ is open, the driver will output maximum current. 10 / 14 www.inventronicsco.com Tel: 8657156565800 Fax: 8657186601139 sales@inventronicsco.com
EUG150SxxxDV 010V Dimming The recommended implementation of the dimming control is provided below. Implementation 3: Positive logic Implementation 4: Negative logic Notes: 1. The dimmer can also be replaced by an active 010V voltage source signal or passive components like resistors and zener. 2. Do NOT connect Dim to the output V or V+, otherwise the driver will not work properly. 3. If 010V dimming is not used, Dim + should be open. 4. When 010V negative logic dimming mode and Dim+ is open, the driver will output minimum current. PWM Dimming The recommended implementation of the dimming control is provided below. Implementation 5: Positive logic 11 / 14 www.inventronicsco.com Tel: 8657156565800 Fax: 8657186601139 sales@inventronicsco.com
EUG150SxxxDV Implementation 6: Negative logic Notes: 1. Do NOT connect Dim to the output V or V+, otherwise the driver will not work properly. 2. If PWM dimming is not used, Dim + should be open. 3. When PWM negative logic dimming mode and Dim+ is open, the driver will output minimum current. Time Dimming Set the timing curve by pulling the sliders. 12 / 14 www.inventronicsco.com Tel: 8657156565800 Fax: 8657186601139 sales@inventronicsco.com
EUG150SxxxDV Programming Connection Diagram Note: The driver does not need to be powered on during the programming process. Please refer to PRGMUL2 (Programmer) datasheet for details. Mechanical Outline INPUT(VDE H05RNF 3*1.0mm 2 7.2) DIMMING WIRE(VDE 3*0.5mm 2 6.3) AC/L(BROWN) AC/N(BLUE) GND (YELLOW/GREEN) V+(BROWN) V(BLUE) BLACK/WHITE PURPLE GRAY Tc OUTPUT(VDE H05RNF 2*1.0mm 2 6.8) PROJ: Unspecified tolerance:±1 RoHS Compliance Our products comply with the European Directive 2011/65/EC, calling for the elimination of lead and other hazardous substances from electronic products. 13 / 14 www.inventronicsco.com Tel: 8657156565800 Fax: 8657186601139 sales@inventronicsco.com
EUG150SxxxDV Revision History Change Date Rev. Description of Change Item From To 20150807 A Datasheets Release / / 20160112 B TUV KS BIS / Added EUG150S070DV / Added Input Specifications Input AC Current Updated General Specifications With mounting ear Added 20160407 C General Specifications Net Weight Added Safety &EMC Compliance / Updated Mechanical Outline / Updated Input Specifications PF/THD Updated Output Specifications Temperature Coefficient of Ioset Updated 20170801 D General Specifications Dimensions Updated Safety &EMC Compliance / Updated Mechanical Outline / Updated 20171026 E 20180131 F Features 7 Years Warranty Added Operating Case Temperature for Warranty Tc_w / Updated Description / Updated General Specifications Lifetime Updated General Specifications Operating Case Temperature for Warranty Tc_w Updated Lifetime vs. Case Temperature / Updated 14 / 14 www.inventronicsco.com Tel: 8657156565800 Fax: 8657186601139 sales@inventronicsco.com