SOLENOI VLVES solenoid air pilot operated, spool type single/dual solenoid (mono/bistable function) aluminium body, / - / FETURES The monostable spool valves in conformity with IE 608 Standard (00 route H version) have TÜV ( series) and EXI (- series) certified with integrity levels: SIL for HFT = 0 / SIL for HFT = The spool valves / have threaded port connections ll the exhaust ports of this spool valve are connectable, providing better environmental protection, particularly recommended for sensitive areas such as clean rooms, and applications in the pharmaceutical and food processing sectors The valve offers environmental protection against the ingress of liquids, dusts or any other foreign matter (environmentally-protected construction) Ultra low level for inside application, suitable to connect to process fieldbus remote I/O or valve couplers The solenoid valves satisfy all relevant EU irectives / Series GENERL ifferential pressure Flow (Qv at 6 bar) - 0, bar [ bar = 00 kpa] / = 860 l/min (/) ; 760 l/min (/)(NR) / = 800 l/min (/, /) fluids ( ) temperature range (TS) seal materials ( ) - to + 0 air, inert gas, filtered () NR (nitrile) + PUR (polyurethane) - to + 60 () With series 0 pilots, suffixes FS/FVT/FSIS/FSZN. MTERILS IN ONTT WITH FLUI ( ) Ensure that the compatibility of the fluids in contact with the materials is verified ody luminium, black anodized End cover (spring) Glass-filled P Spool valve internal parts Zamak, stainless steel, (POM), aluminium Pilot internal parts Size 0 (E06.0.80), refer to specific catalogue pages: /LPKF (contact us) and 9 (LIS) pilots Size (E06.6.0N), refer to specific catalogue pages: 0 pilots (FS/FVT/FSIS/FSZN) and 60 piezotronic (PIS-PISIS) Pilot end covers luminium UP (es FS/FS) - (es FS/FS) LP 0,00W - 0,W 0,W -,W RP - MP P Not available 7,W - 7,6W Ultra Low Low Reduced and Medium asic SPEIFITIONS pipe orifice flow coefficient kv operating pressure differential (bar) min. level optional solenoids POWER LEVELS - cold electrical holding values (watt) max. (PS) TEX / IEEx IP6 air ( ) Ex d Ex ia / Ex ib IP6 Ex n NOMO 0 basic catalogue number NOMO ( ) (mm) (m /h) (l/min) ~ = ~/= () LIS FSIS PISIS FS FSZN PIS Solenoid air pilot operated - spring return (monostable) / 6 0,7, 0 0 LP - - - - m - - 7 () / 6 0,7, - 8 LP - - m - - - - - 7 () / 6 0,7, 0 0 P - - - - - - 7 () - / 6 0,7, - 8 LP - m - - - - - 7 () - / 6 0,7, 8 8 UP - - - m - - - 7 () /,, 0 0 LP - - - - m - - 7 () /,, - 8 LP - - m - - - - - 7 () /,, 0 0 P - - - - - - 7 () - /,, - 8 LP - m - - - - - 7 () - /,, 8 8 UP - - - m - - - 7 () Select 8 for NPT NSI.0. or select G for ISO G (8/) vailable feature m vailable feature in only - Not available () ertified IE 608 Functional Safety data, use suffix "SL". () /LPKF: ontact us ll leaflets are available on: www.asco.com Process Industry - 80089G-07/R0
SPEIFITIONS pipe orifice flow coefficient kv operating pressure differential (bar) min. level optional solenoids max. (PS) TEX / IEEx IP6 air ( ) Ex d Ex ia / Ex ib IP6 Ex n NOMO 0 basic catalogue number NOMO ( ) (mm) (m /h) (l/min) ~ = ~/= () LIS FSIS PISIS FS FSZN PIS Solenoid air pilot operated and return (bistable) / 6 0,7, 0 0 LP - - - - m - - 8 / 6 0,7, - 8 LP - - m - - - - - 8 / 6 0,7, 0 0 P - - - - - - 8 - / 6 0,7, - 8 LP - m - - - - - 8 - / 6 0,7, 8 8 UP - - - m - - - 8 /,, 0 0 LP - - - - m - - 8 /,, - 8 LP - - m - - - - - 8 /,, 0 0 P - - - - - - 8 - /,, - 8 LP - m - - - - - 8 - /,, 8 8 UP - - - m - - - 8 () /LPKF: ontact us PREFIX TLE level description 6 7 UP LP RP P NOMO solenoid (pilot) interface 0 L I S Intrinsically safe, pilot 9, TEX (EN/IE 60079-)* - m - - () Flameproof with pilot /LPKF, aluminium (EN 60079-, -)* - - - NOMO solenoid (pilot) interface F S Solenoid + spade plug MP,x0,, 9, mm, (EN 6070), 0 pilot - - - F V T Solenoid with M connection, LE + protection (EN 6070), 0 pilot - m - - F S I S Intrinsically safe, 9, mm, pilot 0; TEX (EN/IE 60079-, -6)* - m - - F S Z N Non sparking, connector 9, mm cable m, pilot 0 (EN 60079-, -) * - m - - P I S Solenoid with spade plug connector (EN 6070), 60 piezotronic pilot - - - P I S I S Intrinsically safe, piezotronic 60 pilot, TEX (EN/IE 60079-, -6) * m - - - SUFFIX TLE suffix level description UP LP RP P NOMO solenoid (pilot) interface 0 M S Screw type manual operator () () - - - S L ertified IE 608 Functional Safety data (monostable) - m - NOMO solenoid (pilot) interface M S Screw type manual operator () - - - M O Push type manual operator / / - - S L ertified IE 608 Functional Safety data (monostable) / / - - SERIES - PROUT SELETION GUIE STEP Select the fluid temperature range and seal material from the general table on page. Select basic catalogue number, including pipe thread identification letter. Refer to the specifications tables on pages and 6. Example : G7 STEP Select (combination). Select the appropriate operator from the tables on pages and 6. Select for this operator in the electrical characteristics table on page 7: the level (UP, LP, P), the type of electrical enclosure protection and the desired temperature class. Warning: The ambient temperature range of your application may not exceed the temperature range of your operator. Example : FS STEP Select suffix. Suffix MO mandatory for the pilot 0 (FSIS/FSIS/FVTIS/FSZN/ FVTZN). Refer to the suffix table on page 6, respect the indicated level. Example : MO STEP Selection of TPL is mandatory for the 60 pilot (PISIS), HV ( mw) and HV ( mw). dd "X" between the "PISIS" and the basic catalogue number. STEP Select voltage. Refer to standard voltages on page 7. Example : 0V / 0Hz STEP 6 Final catalogue / ordering number. Example : FSG7MO 0 V / 0 Hz OPTIONS & ESSORIES series pipe ll leaflets are available on: www.asco.com - Process Industry exhaust protector (stainless steel) (G) (NPT) (M) / /8 6008 () 6008 () - / 6009 () 6008 () - / 60079 () 6008 () - / M - - 6008 () Select 8 for NPT NSI.0. or select G for ISO G (8/) vailable feature vailable feature in only - Not available * TEX solenoids are also approved according to EN 6- (non electrical valves) () Not to use with SL suffix () Provided with SL suffix () Not to use with LIS ORERING EXMPLES: LIS G 7..V / FS G 8 0V / 0 Hz FS 8 7 MO 0V / 0 Hz FS G 7 SLMO 0V / 0 Hz FSZN G 7 V / PISIS G 8 MO 6V / PISIS G 7 SLMO 6V / PISIS X G 7 MO TPL0666 HV / voltage pipe thread TPL basic number suffix 80089G-07/R0
EXPLNTION OF TEMPERTURE RNGES OF SOLENOI VLVES Valve temperature range The valve temperature range (TS) is determined by the selected seal material, the temperature range for proper operation of the valve and sometimes by the fluid (e.g. steam) Operator ambient temperature range The operator ambient temperature range is determined by the selected level and the safety code Total temperature range The temperature range of the complete solenoid valve is determined by the limitations of both temperature ranges above ELETRIL HRTERISTIS oil insulation class F Electrical safety IE Standard voltages (=) (8) : V - 8V ; FS/FSZN/FVT : V FSIS : V - V ; LIS :..V ; PIS : V to 70V ; PISIS : 6V, 8V, V, V (~) (8) : V - 8V - V - 0V/0Hz ; FS : V - V - 0V/0Hz ; PIS : V to 70V - other voltages and 60Hz are available on request ratings operator electrical ambient replacement coil inrush holding hot/ temperature enclosure cold safety code option ~ ~ = range (TS) protection ~ = (V) (V) (W) (W) ( ) (EN 609) - - type () asic = P (8) 8,6,6 7, 6/7,6 - à +80 IIG Ex d II+H Gb T, II Ex tb III b aluminium IP6 - - 0 Low = LP FS,,, /, - to +60 EN 6070 moulded IP6 - - 0 FS, (7),6 (7), (7) - - to +60 EN 6070 moulded IP6 - - 0 FVT (6) - - -,/, - to +60 EN 6070 moulded IP67 - - 0 FSZN - - - /, - to +0//60 II G Ex n II T6/T/T Gc, II Ex tc III c moulded IP6 - - 07 FSIS ()() - - - 0, -0 to +0/60 II G Ex ia II T6/T Ga, II Ex ia III a moulded IP6 - - 09 LIS ()() - - - 0, -0 to +6 II G Ex ia II T6 Ga, II Ex ib III b () moulded IP6 - - 0 Ultra low = UP PIS - - - 0,007-0 to +60 - moulded IP6 - - 06 PISIS ()() 6V - - - 0,00-0 to +0 II G Ex ia II T6 Ga, II Ex ia III a moulded IP6 - - 06 PISIS ()() 8V - - - 0,0-0 to +0 II G Ex ia II T6 Ga, II Ex ia III a moulded IP6 - - 06 PISIS ()() LV - - - 0,0-0 to +0 II G Ex ia II T6 Ga, II Ex ia III a moulded IP6 - - 06 PISIS ()() HV - - - 0,0-0 to +0 II G Ex ia II T6 Ga, II Ex ia III a moulded IP6 - - 06 PISIS ()() LV - - - 0,06-0 to +0 II G Ex ia II T6 Ga, II Ex ia III a moulded IP6 - - 06 PISIS ()() HV - - - 0, -0 to +0 II G Ex ia II T6 Ga, II Ex ia III a moulded IP6 - - 06 () Piezotronic standard voltages: Prefix PIS, V to 70 V /, peak current max. : 80 m, holding current max. : m Prefix PISIS: 6 V / mw 8 V / mw L V / mw H V / mw L V / 6 mw H V / mw Turn ON voltage U ON 6.. 9 V 7,.. V 0,8.. 6 V 0,8.. 6 V,6.. 8 V,6.. 8 V Turn OFF voltage U OFF V, V, V, V V V Peak current 6 m 0 m 6,8 m 8, m 0 m m Holding current 0, m,8 m m,7 m,9 m, m able + max. barrier resistances (R S + R ) 00 Ω max. 00 Ω max. 00 Ω max. 70 Ω max. 00 Ω max. 70 Ω max. () safety parameters Refer to the dimensional drawings on pages 8 to 0. () Min. operating current (I(ON) min.): 0,06 / U (ON) min. =,8 V (For use in zone 0 locations, see the installation conditions given in the I&M instructions) option U I = () I I P I L I I (V) (m) (W) (H) (µf) Low = LP FSIS 8 00,6 0 0 LIS 0 00,6 0 0 Ultra low = UP PISIS 0 00 0,9 0 0 () Intrinsically safe pilots: heck the electrical characteristics in the corresponding catalogue pages (FSIS/LIS/PISIS: 0/90006/60 pilots). () FSIS (0 pilots): V : I (ON) min., with LE = m; U (ON) min.=,9 V; U (max.) recommended = V; U (OFF) =, V; I (OFF) = 0 m V : I (ON) min., with LE = m; U (ON) min.= 6, V; U (max.) recommended = 8 V; U (OFF) =,7 V; I (OFF) = 7 m (6) Values for LE + protection. (7) : 0V (8) /LPK: ontact us - Not available ELETRIL ONNETIONS connection (8) /" NPT threaded cable entry. Enclosures are supplied without cable gland LIS Spade plug connector with cable gland EN70-80 (ISO 00) for cables with an outer diameter from 6 to 8 mm FS, FSIS, PIS, PISIS Spade plug connector with cable gland IN 60, 9, mm, form, for cables with an outer diameter from to 6 mm FVT M connection for M connector FSZN Spade plug connector, IN 60, 9, mm, form, pre-wired connector length m FL Moulded-in flying lead, standard length 0, m ITIONL OPTIONS TPL numbers: TPL 066: Piezotronic, PISIS, HV ( mw); TPL 0666: Piezotronic, PISIS, HV ( mw) TPL 067: LE and protection, FS, only available in V / and V - dd 0, W () and 0, W/V () Other pipe threads are available on request INSTLLTION SERIES - Installation/maintenance instructions are included with each valve The valves can be mounted in any position without affecting operation IE 608 Functional Safety (suffix SL). heck temperature range of valve body and solenoid for suitability. For probability of failure, contact us It is necessary to connect pipes or fittings to the exhaust ports to protect the internal parts of the valve if used outside or in harsh environments (dusts, liquids etc.) Threaded pipe connection identifier is: 8 = NPT (NSI.0.); G = G (ISO 8/) Valves with suffix "SL" are provided with specific exhaust protectors ll leaflets are available on: www.asco.com Process Industry - 80089G-07/R0
SERIES - IMENSIONS (mm), WEIGHT (kg) Types 0 et 0 Types 0 to 0 Types 0 to 0 Series Series Series 69,6 0, 7 = = 6 x / 7, mounting holes dia., mm Spotfacing: dia. 9 mm, depth mm mounting holes dia. 6, mm Spotfacing: dia. mm, depth 6 mm,8 8, 0, 7, x G/ T W 78, X U 6, 89 Y x V 0, 7, type T U V W X Y 0 to 0 7,6 / 9,,6,8 TYPE 0: pilot/lpkf operator EN/IE 60079-, 60079- TYPE 0: luminium 9/LIS: EN 60079- /: ontact us 7 / 8 7 / 8 /8 NPT / NPT 7 60 M 6 60 07 60 TYPE 0: Polyarylamide 0 pilot FS: IE / IN 60 98 6 76 8 8, 7 / 8 7MS / 7MO / 06MS / 06MO M 0 99 0 7 ll leaflets are available on: www.asco.com 7, 9,8 7,6 7/7MS/7MO/8/8MS/8MO 0 M 80089G-07/R0 - Process Industry
80 SERIES - IMENSIONS (mm), WEIGHT (kg) TYPE 0: Polyarylamide 0 pilot FVT: IE / connection M + LE and protection 7 / 8 7MS / 7MO / 06MS / 06MO 7 / 7MS / 7MO / 8 / 8MS / 8MO 9 9,,6 6 M 6 7, M TYPE 06: Polyamide Piezotronic pilot PIS: IE / IN 60 PISIS: EN/IE 60079-, 60079-6 7MO / 8MO 7MO / 8MO 60 7 0 M 7 M TYPE 07: Polyarylamide 0 pilot FSZN : EN 60079-, 60079-7MO / 8MO 7MO / 8MO 80 60 7 80 80 M 7 M ll leaflets are available on: www.asco.com 80089G-07/R0 Process Industry -
SERIES - IMENSIONS (mm), WEIGHT (kg) TYPE 09: Polyarylamide 0 pilot FSIS: EN/IE 60079-, 60079-6 7MO / 8MO 7MO / 8MO 9 0 9, M 7 7, M Ex d certified cable gland (on request) Three-core cable, length m able gland for unarmoured cable with 7 to mm dia. sheath 6 onnector rotatable by 90 increments, cable Ø 6-8 mm 7 Screw type manual operator, suffix MS 8 Push type or screw type manual operator, suffix MO 9 External pilot air supply, /8 pipe 0 onnector rotatable by 90 increments, cable Ø 6-7 mm Push type manual operator, suffix MO onnectable pilot exhaust port Non-connectable pilot exhaust port IMENSIONS (mm), WEIGHT (kg) type option level weight () monostable bistable 0 () P 97 6, 90 7,7 7 86,7,09,7,7,0 0 LIS LP 76, 07 6, 7, 0,6,9 0,8,7 0 FS LP - 6, - 89-90, - 7, 0,6, 0,, 0 FVT LP - 6, - 89-79, - 7, 0,6,7 0,,7 06 PIS / PISIS UP - 6, - 89-9, - 7, 0,, 0,, 07 FSZN LP -, - 6-90, - 7, 0,, 0,7,9 09 FSIS LP - 6, - 89-9, - 7, 0,7,7 0,,7 () Including coil(s) and connector(s). () /LPKF: ontact us ESSORIES Ø Ø M /8 / /8 /, - exhaust protector (stainless steel) ll leaflets are available on: www.asco.com 80089G-07/R0 6 - Process Industry
SERIES - ESSORIES SERIES Supply rail (supplied with seals and banjo bolts, without mounting brackets) () supply rail for "n" valves supply rail with isolation valves with mounting brackets () llows the isolation of one or more valves from the general pressure supply catalogue number supply rail catalogue number G / NPT / for "n" valves G / NPT 88000 88000 88009-88000 () 880096-880006 88000 880097-880007 880008 880098-6 880008 88000 6 880099-7 880009 880009 7 880090-8 880000 8800060 8 88009 - () vailable on request. 9 88009-0 88009-88009 - 88009-7 / 0 6 series number of valves 6 7 8 08 6 6 9 0 8 76 9 0 8 76 0 60 8 9 67 9 78 06 6 90 8 6 E 70 98 6 8 0 type weight (kg) 0, mono/bistable 0,96 /,,9 /,,6 /,, /,0,8 /,7 /,,0 /,9 0, mono/bistable 0,96 /,,9 /,,6 /,, /,0,8 /,7 /,,0 /,9 06, mono/bistable 0,9 /,0, /,, /,98,9 /,,96 /,76, /,7,8 /,8 07, mono/bistable 0,96 /,,9 /,,6 /,, /,0,8 /,7 /,,0 /,9 08, mono/bistable, /,67,8 /,6, /,8,8 /,, /,8,/,7,8 /,89 09, mono/bistable 0,98 /,6, /,6,66 /, /,, /,6 /,,96 /, mounting brackets () series catalogue number 880009 () () TYPE 0-0-06-07-09 See pages to 0. Supply rail with isolation valves () G /8) 9 E 9 7 Ø 6, 0 8 6,,8 9, 6 60 87,,8 8, () or () supply rail () mounting bracket (x) This mounting arrangement allows valves to be mounted in the positions bellow. Not possible with supply rail and isolation valves Only with supply rail with isolation valves 7 ll leaflets are available on: www.asco.com 80089G-07/R0 Process Industry - 7
SERIES - ll leaflets are available on: www.asco.com 8 - Process Industry vailability, design and specifications are subject to change without notice. ll rights reserved. 80089G-07/R0