Elettra Evolution OK! OK! b. User manual

Similar documents
Aquauno Select MINUTES. (duration) FREQUENCY LED. OFF 8h AQUAUNO SELECT 5 MIN FREQUENCY. the timer is being programmed;

ASY P.O. BOX 729 TERRELL, TEXAS / PAGE 1 OF 13 SAM

McAfee Network Security Platform

Question Paper Wednesday 13 Thursday 14 January 2010

INSTALLER REFERENCE GUIDE

Operation Manual. Embroidery Machine. Product Code: 888-M30/M31

MODEL 351 POWERGLIDE SERIES INSTRUCTIONS FOR INSTALLING SARGENT DOOR CLOSERS WITH "H" HOLDER ARMS

DCM Series DC T-Series Non-Spring Return Rotary Electronic Damper Actuators

WORKSHOP 15 PARASOLID MODELING

SIMPLEX 5000 CYLINDRICAL INSTALLATION INSTRUCTIONS

SERVICE MANUAL 9940/20/10

POWER TRIM. Table of Contents. Section 5C - Dual Power Trim System

PROGRAMMING MANUAL MTMA/01 MTMV/01 FB00329-EN

RWM4400UH High Performance Hand Held Wireless Microphone System

SEIKO DIGITAL STOPWATCH Cal. S058

mac profile Configuration Guide Adobe Photoshop CS/CC Sawgrass Virtuoso SG400/SG800 Macintosh v

ISM-PRO SOFTWARE DIGITAL MICROSCOPE OPERATION MANUAL

001CK CK0012 FR-001CK0013 FR EN English

CAL. NX15 DUO-DISPLAY QUARTZ

A 3 WIRE PASSES THROUGH FLOOR IN THIS AREA.

Analog Input Modules

McAfee Network Security Platform

Operation Manual GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX. Computerized Sewing Machine Product Code: 888-V12/V13/V15

McAfee Network Security Platform

GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX. Operation Manual. Computerized Sewing Machine

AGA56... Analog Input Modules. Siemens Building Technologies HVAC Products

Operation Manual. Product Code 885-V51. Computerized Embroidery Machine GETTING READY EMBROIDERY APPENDIX

36C 10 MOBILEYE WJ,AFM TO STABILIZERS DOWN INDICATOR LIGHT AND ALARM 64A LJ,LR,KE TO BATTERY BOOST SWITCH STARTER CABLE TO CHASSIS BATTERY DETAIL

Installation manual. Daikin Altherma LAN adapter BRP069A61 BRP069A62. Installation manual Daikin Altherma LAN adapter. English

1" MORTISE INSTALLATION INSTRUCTIONS

PORCH. Canopies and Accessories DECKING SYSTEMS. For more information. STOCKISTS For details of your nearest stockist for any product:

PORCH. Canopies and Accessories. For more information. STOCKISTS For details of your nearest stockist for any product:

* * 98/9949WDC. 1-Point Latch (LBL) 2-Point Latch includes these additional parts. Customer Service

BACK DOOR GLASS REPLACEMENT HINT:

Aluminium Roof Outlets - Introduction to Detail Outlets

IMPORTANT SAFETY INSTRUCTIONS

INSTALLATION GUIDE P57T15 PARTITION CURRENT TAHOE. pro-gard.com STRONG RELIABLE SECURE

D DETAIL AA. 1 OF / Nov-2016 NOTES: JY YYF SWITCH-WATER PUMP CHT ACTUATOR CHT CIRCUITS JA,JY,YYF,XXZ

Regular languages can be expressed as regular expressions.

CONGRATULATIONS ON CHOOSING OUR MACHINE PLEASE READ BEFORE USING THIS MACHINE

INSTALLATION & OPERATION INSTRUCTIONS LEVER HANDLE LOCKSETS.

Programming Guide. Neurostimulators for Chronic Pain. RestoreSensor, RestoreUltra, RestoreAdvanced, and PrimeAdvanced

D TO PSM (AEU,AEW,AEX,AEZ, AEY,AFA,AFB,AFC)

For installation help please visit Please Do Not Return Product to Store!

Computerized Embroidery and Sewing Machine. Operation Manual

COVER-ELECTRICAL CHT LABEL-SLIDEOUT WIRE ASM-AUX HOLDING TANK PIN HOUSING TO WIRE ASM-AUX HOLDING TANK LSS-1

ECE 274 Digital Logic Spring Digital Design. Combinational Logic Design Process and Common Combinational Components Digital Design

DETAIL A SCALE 1 : 85

WIRE ASM-A/V / WIRE ASM-A/V TO EXTERIOR TV (COIL ABOVE FLOOR)

EASY DISC Assessment

Operation Manual. Sewing Machine. Product Code: 888-F42

510 Series Color Jetprinter

Operation Manual GETTING READY SEWING BASICS UTILITY STITCHES EMBROIDERY APPENDIX. Easy Thread Cassette System

2 PIN HSG TO WIRE ASM-ROOF DA BA PANEL ASM-CLOSEOUT,ELECT / CHT SCREW G U (6) DOOR ASM CHT SCREW G U (6)

IMPORTANT SAFETY INSTRUCTIONS

Q tomography towards true amplitude image and improve sub-karst image Yang He and Jun Cai, TGS

IMPORTANT SAFETY INSTRUCTIONS

Patterns and Algebra

WIRING INSTL-BODY,110V. 1 OF / Sep J NOTES: (BLU) 2400 DROP FROM GFI GALLEY TO EXT RCP

Cage your cat! Assembly guide

SAMPLE. End of term: TEST A. Year 4. Name Class Date. Complete the missing numbers in the sequences below.

MECHANICAL RF STAT INSTRUCTION MANUAL MECHANICAL RF STAT TRANSMITTER & RECEIVER FITTING & OPERATING INSTRUCTIONS

Operation Manual. Read before use. Read when additional information is required. GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX

ASSEMBLY INSTRUCTIONS

ANTENNA-TPMS W/ EXT CABLE / SENSOR-WHEEL, TPMS / (8) 84 TO GROUND BAR

IMPORTANT SAFETY INSTRUCTIONS

Introduction 6 Basics 8 Projects 26. Stitching terms 94. About the author 95

REMOTE IR/LED MODULE REMOTE 3 REVISION HISTORY C DETAIL A SCALE 1 : 1.5 I\O PANEL - SHEET 1 OF 6 ECO ZONE REV. DESCRIPTION DATE APPR'D

R O M CARGO COVER / HOSE BED COVER HORIZONTAL SHUTTER

English Printed in Taiwan XG

Operation Manual GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX. Computerized Sewing Machine

WIRING INSTL-BODY,110V ITEM/PART NO: 1 OF / REF:

B PANEL-CLOSEOUT CHT

Operation Manual Sewing Machine

PRODUCT MANUAL IDLE TIMER ETR CONTROLLER 12/24 V. Part No

LEXUS IS250/IS350 FRONT SPOILER Section I - Installation Preparation. Part Number: Section I - Installation Preparation.

Operation Manual GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX. Computerized Sewing Machine Product Code: 888-V14

Copyright 2015 Winnebago Industries, Inc.

1 tray of toffee 1 bar of toffee. 10 In the decimal number, 0 7, the 7 refers to 7 tenths or

Basic Embroidery. Chapter 5 COMBINING PATTERNS BEFORE EMBROIDERING PREPARING THE FABRIC SELECTING PATTERNS...

LORING THE SMARTER WAY TO ROAST PROPRIETARY ITEM:

Resistors, Current and Voltage measurements, Ohm s law, Kirchhoff s first and second law. Kirchhoff s first Objectives:

M O T I O N A S S Y 7

FOMA M702iG Manual for Data Communication

660 Freestyle/Style Door with Double In-Line Panels

MATKI ONE MOSR- RECESS SLIDER

1 OF / Aug-2018

ANTENNA-TPMS W/ EXT CABLE / SENSOR-WHEEL, TPMS / (6) CODES/STANDARDS-CSA/CMVSS CABLE ASM (GRN)

Flow Divider / Combiner Cartridge Valves

Installer and user reference guide

McAfee Network Security Platform

1 OF / Sep-2017

SWITCH-LP SHUTOFF ACTUATOR CHT WIRE ASM-MAIN HOLDING TANK WIRE ASM-TANK HEATER TO TANK HEATER PADS GND PWR

MITSUBISHI MITSUBISHI Industrial Sewing Machine

Probability and Statistics P(A) Mathletics Instant Workbooks. Copyright

CONTROL-SLIDEOUT,IN-WALL SCREW G U (4) DETAIL GA SCREW G U (4) DETAIL GB 2 PIN HOUSING TO WATER PUMP A 3 2 PIN HOUSING

Math Circles Finite Automata Question Sheet 3 (Solutions)

TEE-STL BLK 1/2" (SCH 80) TEE-STL BLK 1/2" REGULATOR-TWO STAGE REGULATOR-TWO STAGE

WIRING INSTL-BODY,12V. 1 OF / Sep-2016 NOTES: PLATE-WALL, DUAL COAX CHT SCREW G U (2)

Operation Manual. Addendum. Embroidery Machine. Product Code: 884-T13

Transcription:

Elettr Evolution User mnul Pg. 1 INSTALLING THE SOLENOID VALVE. The progrmmle solenoi vlve is fully wtertight n will funtion even if instlle permnently uner wter t epth of up to one metre (IP68 ingress protetion). It n e instlle in the open or in vlve ox, positione either horizontlly or vertilly.to ensure the ontrol unit remins wtertight, mke ertin tht it is ligne with n fully inserte in its set, n tht the trnsprent over is seurely srewe on, with the sel properly positione in its groove. Wrning: e ertin to instll the progrmmle solenoi vlve oserving the wter flow iretion inite y the rrow: "FLOW". To instll the ttery n set the progrmmes, simply lift the li of the vlve ox: the solenoi vlve n e esily hnle insie the ox. OK! mx 1m OK! For Elettr Evolution 1 F (o.): 90826 For Elettr Evolution 1 M (o.): 90827 FITTING THE. Unsrew the trnsprent over. Remove the ontrol unit. Unsrew the p of the ttery housing n onnet the ttery, oserving the orret polrity. Fit the ttery insie the housing. Retighten the p, heking tht the sel is positione orretly in its set. Align the ontrol unit with the guie on the sing n fit it k into ple. Retighten the trnsprent over, heking tht the sel is in its set. Importnt: use only 9V lkline tteries. When fitting the ttery, the isply lights up for 2 seons, the solenoi vlve loses, n the timer lok will e set utomtilly to 00:00. Alline 9V 2 se. 9V Alline For Elettr Evolution 1 F (o.): 90826 For Elettr Evolution 1 M (o.): 90827

Elettr Evolution Pg. 2 SETTING THE CURRENT TIME. Pressing the utton ENTER, the messge OK will pper. Set the urrent time using the FORWARD/BACK key uttons. (09:00, for exmple) Press ENTER to onfirm the setting. User mnul x 1 x 1 k forwr For Elettr Evolution 1 F (o.): 90826 For Elettr Evolution 1 M (o.): 90827 DAILY PROGRAMMING. The timer is progrmme using just 3 uttons, with the i of wie isply.eh pge hs two funtions: view progrm n, pressing ENTER, mke hnge to progrm. Pressing forwr, the isply will show the other progrms of the line. TIME OPEN PROGRAM 1 (OPEN) CLOSE PROGRAM 1 (CLOSED) OPEN PROGRAM 2 (OPEN) CLOSE PROGRAM 2 (CLOSED) OPEN PROGRAM 3 (OPEN) CLOSE PROGRAM 3 (CLOSED) OPEN PROGRAM 4 (OPEN) CLOSE PROGRAM 4 (CLOSED) OPEN PROGRAM 5 (OPEN) CLOSE PROGRAM 5 (CLOSED) OPEN PROGRAM 6 (OPEN) For Elettr Evolution 1 F (o.): 90826 For Elettr Evolution 1 M (o.): 90827 CLOSE PROGRAM6 (CLOSED)

Elettr Evolution Pg. 3 Press the FORWARD utton to view the strt time t whih the vlve opens, for progrmme 1. Press ENTER to hnge the time isplye. Use the FORWARD n BACK key uttons to set the strt time (open): for exmple, 10:26 hours. Press ENTER to onfirm the setting. Press FORWARD seon time to view the losing time of the vlve, for progrmme 1. User mnul For Elettr Evolution 1 F (o.): 90826 For Elettr Evolution 1 M (o.): 90827 The isply res 1=progr. 1 CLOSED. Use the FORWARD n BACK key uttons to set the require losing time (lose): for exmple, 10:35 hours. Press ENTER to onfirm the setting If susequent progrmmes re to e set, repet the sme proeure. For Elettr Evolution 1 F (o.): 90826 For Elettr Evolution 1 M (o.): 90827

Elettr Evolution User mnul Pg. 4 WEEKLY PROGRAMMING. Press the FORWARD key utton repetely until the weekly progrmming pge is isplye. Press ENTER to mke hnges to the weekly progrmming sheule. Numer 1 is ssoite with the urrent y of the week on whih the first wtering progrmme is to e set: if the urrent y is Thursy, for exmple, then 1=Thursy, 2=Friy, et. Use the FORWARD n BACK key uttons to position the ursor on the y of the week you wish to selet. Press ENTER to etivte or retivte wtering for the selete y (the reltive numer isppers from the isply). For exmple: 2 (Friy) n 5 (Mony) To quit weekly progrmming, position the ursor uner EXIT n press ENTER. x 3 x 3 TIME TIME TIME For Elettr Evolution 1 F (o.): 90826 For Elettr Evolution 1 M (o.): 90827 MANUAL FUNCTION. Press the FORWARD key utton to isply the mnul wtering funtion. Press ENTER to tivte it. Pressing BACK, the timer vlve opens, whilst pressing FORWARD the vlve will lose. This funtion is useful for wtering plnts when require, without eleting the progrmmes lrey store. In ny se, the vlve will lose utomtilly fter 5 minutes. To quit the mnul funtion efore 5 minutes hve elpse, lose the vlve n press ENTER. 1 2 TIME TIME TIME e TIME For Elettr Evolution 1 F (o.): 90826 For Elettr Evolution 1 M (o.): 90827

Elettr Evolution Pg. 5 DELETE PROGRAMMES. To elete progrmme, press FORWARD until the isply shows the CLOSED pge for the progrmme to e remove (progrmme 2, for exmple) Press ENTER, then press the FORWARD n BACK key uttons simultneously. 1 x 4 2 User mnul Progrm 1 elete For Elettr Evolution 1 F (o.): 90826 For Elettr Evolution 1 M (o.): 90827 For more informtion n further etils, plese onsult the instrution mnul supplie with the prout.