Table of Contents Amplifiers... 4-5 ELITE Series... 6-7.. Ti Series... 8-9 SX Series... 10-11 RX Series... 12-13 Subwoofers... 14-15 ELITE Series... 16-17.. Ti Series... 18-19 SX Series... 20-23 RX Series... 24-25 OEM Integrated System Kit Integrated Series... 26-27.. Loaded Enclosure BassCase8... 28-29 Speakers... 30-31 ELITE...32 Ti Series... 33-34 SX Series... 34-35 RX Series... 36-37.. Accessories...38 Promo Items...39
Introduction It s all about The Ultimate Experience... It s about driving top down along a winding California highway with the Rolling Stones as a soundtrack. It s about winning an earth-shaking sound-off competition with amps and subs that people definitely want to take a second and third look at. It s about actually enjoying a long, workday commute thanks to a beautifully remastered version of One Nation Under a Groove playing through your Phoenix Gold system. Its freedom, peace, passion, drive, joy, living for the moment. It s The Ultimate Experience Yes, we ve been around since 1985. Yes, we continue to be the leader in high-end amplifiers, speakers, processors and subwoofers. Yes, our products win awards and accolades around the globe. But, what we actually sell what we offer the audiophile who is serious about their music is The Ultimate Experience. And, with that said we proudly present our newest catalog of products. Phoenix Gold Team
Amplifers For nearly three decades, Phoenix Gold has earned the distinguished reputation for engineering and design excellence of mobile audio amplifiers. Our world class engineering and R/D teams continue to create amplifiers that are more powerful, more efficient and more convenient to integrate into OEM systems. All while maintaining the ultimate goal, the sonic excellence of reproducing your music exactly as it was intended. Over the years, Phoenix Gold has been used as the benchmark for mobile audio amplifiers due to their legacy of unparalleled sound quality. Today, the Phoenix Gold product line is diverse with multiple applications, but it s fundamental engineering and design goals of uncompromising performance remain unchanged. ELITE series Ti series SX series RX series 5
Elite Series Series Features: Burr Brown Operational Amplifiers (Elite.2/.4/.5) Monolithic Signal Capacitors (Elite.2/.4/.5) Audiophile Sanken Output Devices (Elite.2/.4/.5) Overbuilt Unregulated Power Supplies Handwound Power Supply Transformers Triple Darlington Output Stage (Elite.2/.4/.5) Isolated Pre-Amp Section Crossovers have 41 Detents for Exact Frequency Selection Aluminum Shaft Potentiometers Panel Mounted RCAs Clip Indicators Extruded Aluminum Heatsink with Evenflow Technology Integrated Cooling via Endcap Vents Each Amp is Shipped in its Own Soft Felt Protective Cover High Temperature Plexiglass Cover RMD - Remote Voltage Display Ready Remote Level Control with Clip Indicator Included Audio Precision Quality Control Verification Power Output Birth Certificate ELITE.4 shown Dual package Sanken output devices Usually only reserved for the highest end of home amplifiers, they are more than 13 times faster than a normal output device (40MHz vs 3MHz). They are also rated at higher power levels, drive lower impedance loads better and have up to 2.5 times the surface mounting area to transfer heat. The end result is the highest possible sound quality, dynamic performance and reliability. Note: Elite.2 and.4 feature the MT200 dual package devices, the Elite.5 features the TO3 package. Burr Brown Op-Amps and Monolithic Signal Capacitors Burr Brown op-amps provide ultra low distortion and maximum resolution in the pre-amp circuitry. Audiophile monolithic signal capacitors provide frequency response past 50kHz, well past the ability of human hearing. Power Birth Certificate A power birth certificate is included for each amplifier. Elite amplifiers are VERY CONSERVATIVELY rated and will exceed the RMS power rating by up to 30%. 6 1 Ohm Stability Elite amplifiers are overbuilt with massive power supplies that can drive 1 ohm loads. Note: Elite.5 front and rear channels are stable to 2 ohms. All other Elite amplifier channels are stable to 1 ohm.
ELITE.5 5 Channel Amplifier Power Rating... 150 Watts x 4 Channel / 2 Ohms... 100 Watts x 4 Channel / 4 Ohms...1100 Watts x 1 Channel / 1 Ohm... 700 Watts x 1 Channel / 2 Ohms Front and Rear Specifications: Front High Pass Filter Range...20Hz to 4kHz Front High Pass Filter Slope...18dB/Octave Rear High Pass Filter Range...40Hz to 4kHz Front High Pass Filter Slope...18dB/Octave Rear Low Pass Filter Range...40Hz to 4kHz Rear Low Pass Filter Slope...18dB/Octave Efficiency...55% Subwoofer Specifications: Low Pass Range... 30Hz to 300Hz Low Pass Slope...24dB/Octave Subsonic Range... 10Hz to 55Hz Subsonic Filter Slope...24dB/Octave Variable Phase... 0 to 180 degrees Efficiency...85% Overall Specifications: Frequency Response... 20Hz to 50kHz (+/- 1dB) Signal to Noise Ratio...Greater than 110dB Damping Factor... Greater than 200 Power Terminal...1/0GA Heatsink Thermal Mass...13 grams per mm Dimensions...23.3 L x 10.5 W x 2.6 H ELITE.4 4 Channel Amplifier Power Rating...300 Watts x 4 Channel / 1 Ohm*... 250 Watts x 4 Channel / 2 Ohms... 150 Watts x 4 Channel / 4 Ohms Low Pass Range...40Hz to 4kHz Low Pass Slope...18dB/Octave High Pass Filter Range...20Hz to 4kHz High Pass Filter Slope...18dB/Octave Power Terminal...1/0GA Frequency Response... 10Hz to 50kHz (+/- 1dB) Signal to Noise Ratio...Greater than 110dB Efficiency...55% Damping Factor... Greater than 200 Heatsink Thermal Mass...13 grams per mm Dimensions...23.3 L x 10.5 W x 2.6 H... *Reactive Load Measurement Elite Series Amplifiers ELITE.2 2 Channel Amplifier Power Rating...500 Watts x 2 Channel / 1 Ohm*... 400 Watts x 2 Channel / 2 Ohms... 250 Watts x 2 Channel / 4 Ohms Low Pass Range...40Hz to 4kHz Low Pass Slope...18dB/Octave High Pass Filter Range...20Hz to 4kHz High Pass Filter Slope...18dB/Octave Power Terminal...1/0GA Frequency Response... 10Hz to 50kHz (+/- 1dB) Signal to Noise Ratio...Greater than 110dB Efficiency...55% Damping Factor... Greater than 200 Heatsink Thermal Mass...13 grams per mm Dimensions...23.3 L x 10.5 W x 2.6 H... *Reactive Load Measurement ELITE.1 Mono Block Amplifier Power Rating...3200 Watts x 1 Channel / 1 Ohm... 2400 Watts x 1 Channel / 2 Ohms Low Pass Range... 30Hz to 300Hz Low Pass Slope...24dB/Octave Subsonic Range... 10Hz to 55Hz Subsonic Filter Slope...24dB/Octave Bass Boost... 0 to +18dB Variable Phase... 0 to 180 degrees Power Terminal...1/0GA Frequency Response... 20Hz to 300Hz (+/- 1dB) Signal to Noise Ratio...Greater than 100dB Efficiency...85% Damping Factor... Greater than 200 Heatsink Thermal Mass...13 grams per mm Dimensions...23.3 L x 10.5 W x 2.6 H 7
Ti Series Series Features: Efficient Class D Topology Compact Size for Easy Installation Balanced Differential Input Circuitry Audiophile NJM2068M Operational Amplifiers Ultra High Speed IR Class D Chipset ADAPT Power Management (Ti21000.4, Ti21600.5) Thermal Rollback System Circuitry (Ti21000.4, Ti21600.5) 48dB per Octave Subsonic Filter (Ti2800.1, Ti21300.1) Crossovers have 41 detents for Exact Frequency Selection High Grade Aluminum Shaft Potentiometers Surface Mount Component Technology RMD - Remote Voltage Display Ready RBCF - Remote Bass Level Control Included (except Ti21000.4) Direct Insert Power and Speaker Terminals Audio Precision Quality Control Verification High Temperature Plexiglass Cover Signal Clipping Indicators Power Output Birth Certificate Ti12300.1 shown Ultra Efficient Class D Circuitry Ti2 amplifiers operate at 80% efficiency, while most class A/B amplifiers operate at 50% efficiency. This means Ti2 amplifiers generate much less heat and draw much less current from your vehicle. Cooler running amplifiers and less stress on your vehicle s electrical system is a good thing. Thermal Rollback System Circuitry Under most conditions, Ti2 amplifiers generate very little heat during normal use. However, if extreme conditions exist, as temperatures rise the amplifier will automatically adjust the amplifier s output, so your music continues to play without the possibility of thermal shutdown or amplifier damage. Power Birth Certificate As part of quality control, each Ti2 series amp is tested and the actual specifications of that amp are included on each power birth certificate. 8 ADAPT Power Management The amplifier seamlessly optimizes the power supply and Class D operating circuitry by adapting to the end user s listening habits. When the ADAPT circuit senses lower power levels, it will automatically optimize the amplifier s power supply and Class D circuitry to a low power mode that maximizes efficiency and minimizes heat to almost zero. As a power increase is detected the amplifier instantly shifts into a high power mode, where the power supply and Class D sections are now optimized to deliver massive power and headroom for those demanding listening sessions. The amplifier is constantly monitoring and adapting between these modes which results in higher overall efficiency, much lower operating temperatures and rock solid reliability.
Ti21600.5 5 Channel Amplifier Power Rating...200 Watts x 4 Channel / 2 Ohms...125 Watts x 4 Channel / 4 Ohms... 800 watts x 1 Channel / 2 Ohms... 500 watts x 1 Channel / 4 Ohms Sub Low Pass Range... 30Hz to 300Hz Low Pass Slope...12dB/Octave Sub Variable Phase...0 to 180 degrees Front High Pass Filter Range... 40Hz to 4kHz High Pass Filter Slope...12dB/Octave Rear High Pass Filter Range... 20Hz to 4kHz Rear High Pass Filter Slope...12dB/Octave Rear Low Pass Filter Range... 40Hz to 4kHz Rear Low Pass Filter Slope...12dB/Octave Power Terminal...4GA Frequency Response... 20Hz to 20kHz (+/- 1dB) Signal to Noise Ratio... Greater than 100dB Efficiency... 80% Damping Factor...Greater than 200 Heatsink Thermal Mass...6.0 grams per mm Dimensions...14.4 L x 7.1 W x 2.0 H Ti21000.4 4 Channel Amplifier Power Rating...250 Watts x 4 Channel / 2 Ohms...150 Watts x 4 Channel / 4 Ohms Front High Pass Filter Range... 40Hz to 4kHz High Pass Filter Slope...12dB/Octave Rear High Pass Filter Range... 20Hz to 4kHz Rear High Pass Filter Slope...12dB/Octave Rear Low Pass Filter Range... 40Hz to 4kHz Rear Low Pass Filter Slope...12dB/Octave Power Terminal...4GA Frequency Response... 20Hz to 20kHz (+/- 1dB) Signal to Noise Ratio... Greater than 100dB Efficiency... 80% Damping Factor...Greater than 200 Heatsink Thermal Mass...6.0 grams per mm Dimensions...11.7 L x 7.1 W x 2.0 H Ti Series Amplifiers Ti21300.1 Mono Block Amplifier Power Rating...1300 Watts x 1 Channel / 1 Ohm...900 Watts x 1 Channel / 2 Ohms Low Pass Range... 30Hz to 200Hz Low Pass Slope...24dB/Octave Subsonic Range... 10Hz to 55Hz Subsonic Filter Slope...48dB/Octave Bass Boost... 0 to +18dB Variable Phase...0 to 180 degrees Power Terminal...4GA Frequency Response...20Hz to 200Hz (+/- 1dB) Signal to Noise Ratio... Greater than 90dB Efficiency... 80% Damping Factor...Greater than 200 Heatsink Thermal Mass...6.0 grams per mm Dimensions...14.4 L x 7.1 W x 2.0 H Ti2800.1 Mono Block Amplifier Power Rating...800 Watts x 1 Channel / 1 Ohm...600 Watts x 1 Channel / 2 Ohms Low Pass Range... 30Hz to 200Hz Low Pass Slope...24dB/Octave Subsonic Range... 10Hz to 55Hz Subsonic Filter Slope...48dB/Octave Bass Boost... 0 to +18dB Variable Phase...0 to 180 degrees Power Terminal...4GA Frequency Response...20Hz to 200Hz (+/- 1dB) Signal to Noise Ratio... Greater than 90dB Efficiency... 80% Damping Factor...Greater than 200 Heatsink Thermal Mass...6.0 grams per mm Dimensions...11.7 L x 7.1 W x 2.0 H 9
SX Series Series Features: Ultra Efficient Class D Topology Compact Size for Easy Installation ADAPT Power Management (SX800.4, SX1200.5) Surface Mount Component Technology Thermal Rollback System Circuitry (SX800.4, SX1200.5) RMD - Remote Voltage Display Ready (see pg. 40) RBCF - Remote Bass Level Control Included (except SX800.4) Direct Insert Power and Speaker Terminals Audio Precision Quality Control Verification Backlit Blue Phoenix Gold Logo Power Output Birth Certificate SX600.1 shown Ultra Efficient Class D Circuitry SX amplifiers operate at 80% efficiency, while most class A/B amplifiers operate at 50% efficiency. This means SX amplifiers generate much less heat and draw much less current from your vehicle. Cooler running amplifiers and less stress on your vehicle s electrical system is a good thing. Thermal Rollback System Circuitry Under most conditions, SX amplifiers generate very little heat during normal use. However, if extreme conditions exist, as temperatures rise the amplifier will automatically adjust the amplifier s output, so your music continues to play without the possibility of thermal shutdown or amplifier damage. Power Birth Certificate As part of quality control, each SX series amp is tested and the actual specifications of that amp are included on each power birth certificate. 10 ADAPT Power Management The amplifier seamlessly optimizes the power supply and Class D operating circuitry by adapting to the end user s listening habits. When the ADAPT circuit senses lower power levels, it will automatically optimize the amplifier s power supply and Class D circuitry to a low power mode that maximizes efficiency and minimizes heat to almost zero. As a power increase is detected the amplifier instantly shifts into a high power mode, where the power supply and Class D sections are now optimized to deliver massive power and headroom for those demanding listening sessions. The amplifier is constantly monitoring and adapting between these modes which results in higher overall efficiency, much lower operating temperatures and rock solid reliability.
SX1200.5 SX1200.1 5 Channel Amplifier Power Rating...200 Watts x 4 Channel / 2 Ohms...125 Watts x 4 Channel / 4 Ohms... 400 watts x 1 Channel / 2 Ohms... 250 watts x 1 Channel / 4 Ohms Sub Low Pass Range... 30Hz to 300Hz Low Pass Slope...12dB/Octave Front/Rear High Pass Filter Range... 15Hz to 300Hz High Pass Filter Slope...12dB/Octave Power Terminal...4GA Frequency Response... 20Hz to 20kHz (+/- 1dB) Signal to Noise Ratio... Greater than 100dB Total Harmonic Distortion...Less than.1% Efficiency... 80% Damping Factor...Greater than 200 Heatsink Thermal Mass...5.0 grams per mm Dimensions...12.3 L x 6.9 W x 2.0 H Mono Block Amplifier Power Rating...1200 Watts x 1 Channel / 1 Ohm... 800 Watts x 1 Channel / 2 Ohms Low Pass Range... 30Hz to 300Hz Low Pass Slope...12dB/Octave Subsonic Range... 10Hz to 55Hz Subsonic Filter Slope...12dB/Octave Bass Boost... 0 to +18dB Variable Phase... 0 to 180 degrees Power Terminal... 4GA Frequency Response... 20Hz to 300Hz (+/- 1dB) Signal to Noise Ratio...Greater than 90dB Total Harmonic Distortion... Less than.1% Efficiency...80% Damping Factor... Greater than 200 Heatsink Thermal Mass...5.0 grams per mm Dimensions...12.3 L x 6.9 W x 2.0 H SX800.4 SX600.1 4 Channel Amplifier Power Rating...200 Watts x 4 Channel / 2 Ohms...125 Watts x 4 Channel / 4 Ohms Low Pass Range... 40Hz to 400Hz Low Pass Slope...12dB/Octave High Pass Filter Range... 40Hz to 400Hz High Pass Filter Slope...12dB/Octave Bass Boost... 0 to +18dB Power Terminal...4GA Frequency Response... 20Hz to 20kHz (+/- 1dB) Signal to Noise Ratio... Greater than 100dB Total Harmonic Distortion...Less than.1% Efficiency... 80% Damping Factor...Greater than 200 Heatsink Thermal Mass...5.0 grams per mm Dimensions... 11.2 L x 6.9 W x 2.0 H Mono Block Amplifier Power Rating...600 Watts x 1 Channel / 1 Ohm... 400 Watts x 1 Channel / 2 Ohms Low Pass Range... 30Hz to 300Hz Low Pass Slope...12dB/Octave Subsonic Range... 10Hz to 55Hz Subsonic Filter Slope...12dB/Octave Bass Boost... 0 to +18dB Variable Phase... 0 to 180 degrees Power Terminal... 4GA Frequency Response... 20Hz to 300Hz (+/- 1dB) Signal to Noise Ratio...Greater than 90dB Total Harmonic Distortion... Less than.1% Efficiency...80% Damping Factor... Greater than 200 Heatsink Thermal Mass...5.0 grams per mm Dimensions...10.1 L x 6.9 W x 2.0 H SX Series Amplifiers SX400.1 Mono Block Amplifier Power Rating... 400 Watts x 1 Channel / 2 Ohms... 250 Watts x 1 Channel / 4 Ohms Low Pass Range... 30Hz to 300Hz Low Pass Slope...12dB/Octave Subsonic Range... 10Hz to 55Hz Subsonic Filter Slope...12dB/Octave Bass Boost... 0 to +18dB Variable Phase... 0 to 180 degrees Power Terminal... 8GA Frequency Response... 20Hz to 300Hz (+/- 1dB) Signal to Noise Ratio...Greater than 90dB Total Harmonic Distortion... Less than.1% Efficiency...80% Damping Factor... Greater than 200 Heatsink Thermal Mass...5.0 grams per mm Dimensions...7.4 L x 6.9 W x 2.0 H 11
RX Series Series Features: Surface Mount Component Technology Robust Unregulated Power Supply Audiophile Bi-Polar Output Devices (Except RX1100.1) High Level inputs for Easy OEM integration RMD - Remote Voltage Display Ready (see pg. 40) RBCF - Remote Bass Level Control Included (except RX400.4) Direct Insert Power and Speaker Terminals Audio Precision Quality Control Verification High Temperature Plexiglass Cover Power Output Birth Certificate RX600.5 shown Surface Mount Technology Most entry line amplifiers use a low cost single sided circuit board where parts are hand inserted and crudely soldered that end up in the wrong location or fail over time due to poor solder. RX amplifiers use a high quality doubled sided circuit board with SMT parts. Each part is computer tested before instantly inserted and soldered by machine onto the PCB. The result is the correct part secured in the correct place for the lifetime of the amplifier. Overbuilt from input to output RX amplifiers feature overbuilt power supplies with more capacitance, larger transformers and higher quality MOSFETs. The result is better reliability, more dynamic output and more RMS power. Musically the amplifiers sound excellent as the output stages feature audiophile Bi-Polar output transistors. Power Birth Certificate As part of quality control, each RX series amp is tested and the actual specifications of that amp are included on each power birth certificate. 12 High Level Inputs Connecting to the OEM factory system is easy as all RX series feature high levels inputs.
RX600.5 RX1100.1 5 Channel Amplifier Power Rating... 80 Watts x 4 Channel / 2 Ohms... 60 Watts x 4 Channel / 4 Ohms...300 watts x 1 Channel / 2 Ohms...200 watts x 1 Channel / 4 Ohms Sub Low Pass Range... 30Hz to 300Hz Low Pass Slope...12dB/Octave Front/Rear High Pass Filter Range... 15Hz to 300Hz High Pass Filter Slope...12dB/Octave Power Terminal... 4GA Frequency Response... 20Hz to 20kHz (+/- 1dB) Signal to Noise Ratio...Greater than 100dB Front/ Rear Efficiency...50% Sub Efficiency...80% Damping Factor... Greater than 200 Heatsink Thermal Mass...7.0 grams per mm Dimensions...14.5 L x 8.4 W x 2.0 H Mono Block Amplifier Power Rating...1100 Watts x 1 Channel / 1 Ohm... 800 Watts x 1 Channel / 2 Ohms Low Pass Range... 30Hz to 300Hz Low Pass Slope...12dB/Octave Subsonic Range... 10Hz to 55Hz Subsonic Filter Slope...12dB/Octave Bass Boost... 0 to +18dB Variable Phase... 0 to 180 degrees Power Terminal... 4GA Frequency Response... 20Hz to 300Hz (+/- 1dB) Signal to Noise Ratio... Greater than 90dB Efficiency... 80% Damping Factor... Greater than 200 Heatsink Thermal Mass... 7.0 grams per mm Dimensions...11.75 L x 8.4 W x 2.0 H RX400.4 RX500.1 4 Channel Amplifier Power Rating... 100 Watts x 4 Channel / 2 Ohms... 75 Watts x 4 Channel / 4 Ohms Low Pass Range... 40Hz to 400Hz Low Pass Slope...12dB/Octave High Pass Filter Range... 40Hz to 400Hz High Pass Filter Slope...12dB/Octave Power Terminal... 8GA Frequency Response... 20Hz to 20kHz (+/- 1dB) Signal to Noise Ratio...Greater than 100dB Efficiency...50% Damping Factor... Greater than 200 Heatsink Thermal Mass... 7.0 grams per mm Dimensions...14.5 L x 8.4 W x 2.0 H Mono Block Amplifier Power Rating... 500 Watts x 1 Channel / 2 Ohms... 300 Watts x 1 Channel / 4 Ohms Low Pass Range... 30Hz to 300Hz Low Pass Slope...12dB/Octave Subsonic Range... 10Hz to 55Hz Subsonic Filter Slope...12dB/Octave Bass Boost... 0 to +18dB Variable Phase... 0 to 180 degrees Power Terminal... 4GA Frequency Response... 20Hz to 300Hz (+/- 1dB) Signal to Noise Ratio... Greater than 90dB Efficiency... 50% Damping Factor... Greater than 200 Heatsink Thermal Mass... 7.0 grams per mm Dimensions...14.5 L x 8.4 W x 2.0 H RX Series Amplifiers RX250.1 Mono Block Amplifier Power Rating... 250 Watts x 1 Channel / 2 Ohms... 150 Watts x 1 Channel / 4 Ohms Low Pass Range... 30Hz to 300Hz Low Pass Slope...12dB/Octave Subsonic Range... 10Hz to 55Hz Subsonic Filter Slope...12dB/Octave Bass Boost... 0 to +18dB Variable Phase... 0 to 180 degrees Power Terminal... 8GA Frequency Response... 20Hz to 300Hz (+/- 1dB) Signal to Noise Ratio... Greater than 90dB Efficiency... 50% Damping Factor... Greater than 200 Heatsink Thermal Mass... 7.0 grams per mm Dimensions...9.4 L x 8.4 W x 2.0 H 13
Subwoofers From the bone crushing Elite to the ultra compact SXt, Phoenix Gold offers a wide range of subwoofer solutions with outstanding low frequency performance. Each series is carefully engineered with the focus on real world sound quality and reliability. Featuring overbuilt OFC copper voice coils, woven tinsel leads, and highexcursion CAE/CAD motor structures Phoenix Gold subwoofers will take your audio system to the next level of performance. ELITE series Ti series SX series RX series 15
Elite Series 16
Series Features:: 60mm of Peak to Peak Excursion Dual 4 Ohms Voice Coil Model 3.0 Premium OFC Copper Wound Voice Coil Dual Long Throw Spider Suspension Woven Tinsel Leads Composite Material Hybrid Cone High Excursion CAE/CAD Motor Design Vented Titanium-Aluminum Hybrid Former One Piece Aluminum Plated Dustcap with Tri-Blue LEDs High Roll Butyl Rubber Surround Nickel Plated 12 Gauge Speaker Terminal Optimized for Sealed or Vented Enclosures Rigid Powder Coated Anti-Resonant Castbasket Elite Series Subwoofers ELITE.12d4 12 inch Subwoofer (Dual 4 Ohms) Power Handling...1600w RMS Impedance... Dual 4 Ohms Frequency Response...20 to 300Hz 17ELITE.12d2 12 inch Subwoofer (Dual 2 Ohms) Power Handling...1600w RMS Impedance... Dual 2 Ohms Frequency Response...20 to 300Hz
Ti Series 18
Series Features:: 40mm of Peak to Peak Excursion Dual Voice Coil Models Long Throw Spider Suspension Woven Tinsel Leads Expanded Polypropylene Cone High Excursion CAE/CAD Motor Design Vented Titanium-Aluminum Hybrid Former One Piece Aluminum Plated Dustcap High Roll Butyl Rubber Surround High Temperature 2.5 inch OFC Copper Voice Coils Nickel Plated 12 Gauge Speaker Terminal Optimized for Sealed or Vented Enclosures Rigid Powder Coated Anti-Resonant Cast Basket Ti215d4 15 inch Subwoofer (Dual 4 Ohms) Power Handling...800w RMS Impedance... Dual 4 Ohms Frequency Response...20 to 300Hz Ti Series Subwoofers Ti212d4 12 inch Subwoofer (Dual 4 Ohms) Power Handling... 600w RMS Impedance...Dual 4 Ohms Frequency Response... 20 to 300Hz Ti212d2 12 inch Subwoofer (Dual 2 Ohms) Power Handling... 600w RMS Impedance...Dual 2 Ohms Frequency Response... 20 to 300Hz Ti210d4 10 inch Subwoofer (Dual 4 Ohms) Power Handling... 600w RMS Impedance...Dual 4 Ohms Frequency Response... 20 to 300Hz Ti210d2 10 inch Subwoofer (Dual 2 Ohms) Power Handling... 600w RMS Impedance...Dual 2 Ohms Frequency Response... 20 to 300Hz 19
SX Series 20
Series Features:: 35mm of Peak to Peak Excursion High Excursion CAE/CAD Motor Design Vented Aluminum Former Long Throw Spider Suspension One Piece Polypropylene Plated Dustcap High Roll Butyl Rubber Surround 2.5 Inch High Temperature OFC Copper Voice Coils (SX18s4 2.0 inch) Nickel Plated 12 Gauge Speaker Terminal Optimized for Sealed or Vented Enclosures Powder Coated Anti-Resonant Steel Basket SX112d4 12 inch Subwoofer (Dual 4 Ohms) Power Handling... 400w RMS Impedance...Dual 4 Ohms Frequency Response... 20 to 300Hz SX112d2 12 inch Subwoofer (Dual 2 Ohms) Power Handling... 400w RMS Impedance...Dual 2 Ohms Frequency Response... 20 to 300Hz SX Series Subwoofers SX110d4 10 inch Subwoofer (Dual 4 Ohms) Power Handling... 400w RMS Impedance...Dual 4 Ohms Frequency Response... 20 to 300Hz SX110d2 10 inch Subwoofer (Dual 2 Ohms) Power Handling... 400w RMS Impedance...Dual 2 Ohms Frequency Response... 20 to 300Hz SX18s4 8 inch Subwoofer (Single 4 Ohms) Power Handling... 200w RMS Impedance... Single 4 Ohms Frequency Response... 35 to 300Hz 21
SX Series 22
Series Features:: High Excursion Performance with Slim Mounting Depths 25mm of Peak to Peak Excursion Dual 2 and 4 Ohms Voice Coil Models Woven Tinsel Leads High Excursion CAE/CAD Motor Design Reinforced Vacuum Form Cone Assembly One Piece Polypropylene Plated Dustcap Die Cast Aluminum Spider Spacer Heat Sink High Temperature 2.0 inch OFC Copper Voice Coils Nickel Plated 12 Gauge Speaker Terminal Optimized for Small Sealed Enclosures Powder Coated Anti-Resonant Steel Basket SX Series Subwoofers SXt12d4 12 inch Subwoofer (Dual 4 Ohms) Power Handling... 300w RMS Impedance...Dual 4 Ohms Frequency Response... 20 to 300Hz Mounting Depth... 4.1 SXt12d2 12 inch Subwoofer (Dual 2 Ohms) Power Handling... 300w RMS Impedance...Dual 2 Ohms Frequency Response... 20 to 300Hz Mounting Depth... 4.1 SXt10d4 10 inch Subwoofer (Dual 4 Ohms) Power Handling... 300w RMS Impedance...Dual 4 Ohms Frequency Response... 20 to 300Hz Mounting Depth... 3.7 SXt10d2 10 inch Subwoofer (Dual 2 Ohms) Power Handling... 300w RMS Impedance...Dual 2 Ohms Frequency Response... 20 to 300Hz Mounting Depth... 3.7 23
RX Series 24
Series Features:: 25mm of Peak to Peak Excursion Single and Dual 4 Ohms Voice Coil Models High Excursion CAE/CAD Motor Design Vented Kapton Former One Piece Polypropylene Plated Dustcap High Roll Butyl Rubber Surround High Temperature 2.0 Inch OFC Copper Voice Coils Nickel Plated 12 Gauge Speaker Terminal Optimized for Sealed or Vented Enclosures Powder Coated Anti-Resonant Steel Basket RX Series Subwoofers RX112d 12 inch Subwoofer (Dual 4 Ohms) Power Handling... 200w RMS Impedance...Dual 4 Ohms Frequency Response... 20 to 300Hz RX110d 10 inch Subwoofer (Dual 4 Ohms) Power Handling... 200w RMS Impedance...Dual 4 Ohms Frequency Response... 20 to 300Hz RX112 12 inch Subwoofer (Single 4 Ohms) Power Handling... 200w RMS Impedance... Single 4 Ohms Frequency Response... 20 to 300Hz RX110 10 inch Subwoofer (Single 4 Ohms) Power Handling... 200w RMS Impedance... Single 4 Ohms Frequency Response... 20 to 300Hz 25
Integrated Series The Integrated Series is the first aftermarket mobile amplifier with full databus awareness and integration, this means it can replace the factory amplifier in a nearly plug n play installation. Installing an amplifier into a newer car can be a painful experience of splicing into a maze of wires or using buggy black boxes that will disable many key OEM features and functions of the vehicle. Installing an Integrated Series amplifier is easy, simply remove the stock amplifier, then plug in the Integrated Series amplifier using the provided wiring harnesses. There are no wires to cut, no fishing for obscure wires and no additional band aids to wire up. The amplifier fully retains all the OEM functions such as steering wheel controls, head unit functionality, blue tooth, On-star, chime function, etc. This makes for a predictable and painless installation that is completely reversible when the lease is up or the vehicle is sold. 800w, 6 channel Amplifier with Fully Integrated Vehicle Data-bus System Custom Fit, High Output 10 Subwoofer Enclosure Quick and Painless Plug-n-Play Installation Remote Touchscreen LCD The Integrated Series enclosure has been designed to use minimal space and match the look of your trunk. Thanks to the integrated 10 sub woofer the system allows you to hear and feel the punch of a bass drum. Equipped with a road-proven Phoenix Gold power amp that delivers power and clarity. 26 A touchscreen LCD screen allows you to tune your car sonically to your preferences.
Features:: Integrated Sound System Upgrade for the Chevrolet Camaro (2010-2014) All-in-one, complete high-power car audio upgrade solution 1 hour, quick and painless installation AMPLIFIER - i800.6» 800 Watts, 6 Channels» First fully integrated aftermarket mobile audio amplifier with full data-bus awareness and integration» Created in collaboration with Pacific Accessory Corporation (PAC) OEM integration experts» Easy Plug and Play OEM installation with provided signal and power wiring harnesses» Fully retains all OEM/stock functions such as steering wheel controls, Headunit, Onstar, Bluetooth, etc.» Utilizes Digital Signal Processing System for proper OEM signal integration, crossover and equalization for factory speakers.» Compatible with amplified, or non amplified factory audio systems.» Touch Panel LCD remote control allows adjustment of sub-level, EQ presets, settings, etc.» Subwoofer Pre-Amp Output for easy addition of an even larger subwoofer amplifier» Remote turn-on output for triggering additional aftermarket Amplifiers» Advanced PC Adjustment - 14 Band Digital EQ, +-12dB and user preset storage - 6 pre-configured presets, and 6 user definable presets» User adjustable center channel gain, subwoofer gain, and crossover point» 5 listening positions: Driver, Passenger, Front, Rear, and Off SUBWOOFER» 10 High Power Subwoofer» High Efficiency Vented Enclosure» Integrated Amplifier Rack Integrated Series Programmable Software Interface Enables you to Fine-Tune your System to Perfection. iamp-gm1 Power Rating...Front/Rear: 50 Watts x 4 Channel / 4 Ohms...Center: 25 watts x 1 Channel / 4 Ohms... Sub: 320 watts x 1 Channel / 2 Ohms Sub Low Pass Range... 30Hz to 300Hz Low Pass Slope...24dB/Octave Front/Rear High Pass Filter Range... 40Hz to 400Hz High Pass Filter Slop...12dB/Octave Bass Boost... 0 to +18dB Power Terminal... 4GA Frequency Response... 20Hz to 20kHz (+/- 1dB) Signal to Noise Rati... Greater than 100dB Total Harmonic Distortion...Less than.01% Efficiency...50% Damping Factor... Greater than 200 Heatsink Thermal Mass...9.5 grams per mm...note: Compatible with hardtop vehicles only. Integrated Series 27
Loaded Enclosure 28
Features:: Loaded 8 Inch Vented Subwoofer Enclosure Compact Size for Easy Installation Powder Coated Protective Metal Grill Heavy Duty 5/8 Inch MDF Construction High Air Flow Slot Vent Embroidered Logo and Cosmetics Highlights High Excursion CAE/CAD Subwoofer Motor Design One Piece Polypropylene Dustcap Butyl Rubber Surround High Temperature OFC Copper Voice Coil Nickel Plated Spring Wiring Terminal Loaded Enclosure BASSCASE8 High performance Vented Subwoofer Enclosure Power Handling... 200w RMS Impedance... 4 Ohms Frequency Response... 30 to 300Hz Dimensions... 18.7 L x 6.7 W x 11.0 H 29
30
Speakers Whether upgrading a stock system with RX coaxials or enjoying the highest levels of sound quality with the Elite component system, Phoenix Gold has a wide range of full range speakers solutions. Each speaker model is engineered with some of the finest materials available such as pure silk dome tweeters, dual roll surrounds, and CAE/CAD motor structures. The finest materials combined with countless hours of real world measuring, listening and voicing of each speaker model ensures all Phoenix Gold speaker systems deliver ultra dynamic and realistic performance. ELITE series Ti series SX series RX series 31
Elite Series ELITE.65CS Features 25mm Silk Dome Tweeter Fully Machined Aluminum Tweeter Housing Dampened Polypropylene Cone Smooth Termination Dual Roll Rubber Surround Powder Coated Diecast Aluminum Basket Custom Tooled Crossover Housing with Direct Insert Wiring Connections 24dB External Audiophile Crossover with Tweeter Level Adjustment Two Stage Light Bulb Tweeter Protection Circuitry Integrated Phase Plug Interwoven Tinsel Leads High Temperature CAE/CAD Motor Structure Component Speakers Power Handling...150w RMS - 300w PEAK Impedance... 4 Ohms Frequency Response...50Hz to 20kHz ELITE.CS1T Features 25mm Silk Dome Tweeter Inline 6dB High Pass Crossover Filter Fully Machined Aluminum Housing Neodymium Motor Structure Ferrofluid Cooling Technology Tweeters Power Handling...100w RMS - 200w PEAK Impedance... 4 Ohms Frequency Response... 2.5kHz to 20kHz 32
Ti269PS Series Features 20mm Silk Dome Tweeter Pointsource Tweeter and Midrange Design Poly Treated Paper Cone Smooth Termination Dual Roll Rubber Surround Powdercoated Anti-Resonant Steel Basket 24dB External Crossover Interwoven Tinsel Leads High Temperature CAE/CAD Motor Structure 6 x 9 Pointsource Speakers Power Handling...100w RMS - 200w PEAK Impedance... 4 Ohms Frequency Response...50Hz to 20kHz Ti Series Speakers Ti265PS 6.5 Pointsource Speakers Power Handling...100w RMS - 200w PEAK Impedance... 4 Ohms Frequency Response...50Hz to 20kHz Ti257PS 5 x 7 Pointsource Speakers Power Handling...100w RMS - 200w PEAK Impedance... 4 Ohms Frequency Response...50Hz to 20kHz 33
Ti and SX Series Speakers Ti265CS SX65CS Features 20mm Silk Dome Tweeter Fully Machined Aluminum Tweeter Housing Poly Treated Paper Cone Smooth Termination Dual Roll Rubber Surround Powder Coated Diecast Aluminum Basket Custom Tooled Crossover Housing with Direct Insert Wiring Connections 24dB External Audiophile Crossover with Tweeter Level Adjustment Continuous Play Tweeter Protection Circuitry Integrated Aluminum Dustcap Interwoven Tinsel Leads High Temperature CAE/CAD Motor Structure Component Speakers Power Handling...125w RMS - 250w PEAK Impedance... 4 Ohms Frequency Response...50Hz to 20kHz Features 20mm Pivoting Silk Dome Tweeter Aluminum Plated Grained Polypropylene Cone Powdercoated Anti-Resonant Steel Basket Tweeter Flush Mount or Surface Mount Capability 24dB External Audiophile Crossover with Tweeter Level Adjustment Integrated Phase Plug Interwoven Tinsel Leads Butyl Rubber Surround High Temperature CAE/CAD Motor Structure Component Speakers Power Handling...125w RMS - 250w PEAK Impedance... 4 Ohms Frequency Response...60Hz to 20kHz 34
SX69CX Series Features 20mm Silk Dome Tweeter Aluminum Plated Grained Polypropylene Cone Powder Coated Anti-Resonant Steel Basket 18dB Integrated Crossover Interwoven Tinsel Leads Butyl Rubber Surround High Temperature CAE/CAD Motor Structure 6 x 9 Coaxial Speakers Power Handling...90w RMS - 180w PEAK Impedance... 4 Ohms Frequency Response...50Hz to 20kHz SX Series Speakers SX65CX 6.5 Coaxial Speakers Power Handling...75w RMS - 150w PEAK Impedance... 4 Ohms Frequency Response...60Hz to 20kHz SX57CX 5 x 7 Coaxial Speakers Power Handling...75w RMS - 150w PEAK Impedance... 4 Ohms Frequency Response...60Hz to 20kHz SX6CX 6 Coaxial Speakers Power Handling...75w RMS - 150w PEAK Impedance... 4 Ohms Frequency Response...60Hz to 20kHz SX5CX 5.25 Coaxial Speakers Power Handling...60w RMS - 120w PEAK Impedance... 4 Ohms Frequency Response...70Hz to 20kHz 35
RX Series Speakers RX65CS Features 19mm Mylar Balanced Dome Tweeter Triple Laminated, Ultra Stiff and Light Cone Integrated Phase Plug Anti-Resonant Steel Basket UV Treated Foam Surround High Temperature CAE/CAD Motor Structure 24dB External Audiophile Crossover Component Speakers Power Handling...75w RMS - 150w PEAK Impedance... 4 Ohms Frequency Response...60Hz to 20kHz 36
Series Features 19mm Mylar Balanced Dome Tweeter Anti-Resonant Steel Basket High Temperature CAE/CAD Motor Structure Triple Laminated, Ultra Stiff and Light Cone UV Treated Foam Surround RX Series Speakers RX69CX RX65CX RX57CX 6 x 9 Coaxial Speakers Power Handling...60w RMS - 120w PEAK Impedance... 4 Ohms Frequency Response... 70Hz to 20kHz 6.5 Coaxial Speakers Power Handling...50w RMS - 100w PEAK Impedance... 4 Ohms Frequency Response... 70Hz to 20kHz 5 x 7 Coaxial Speakers Power Handling...50w RMS - 100w PEAK Impedance... 4 Ohms Frequency Response... 70Hz to 20kHz RX5CX RX46CX RX4CX 37 5.25 Coaxial Speakers Power Handling...40w RMS - 80w PEAK Impedance... 4 Ohms Frequency Response... 70Hz to 20kHz 4 x 6 Coaxial Speakers Power Handling...40w RMS - 80w PEAK Impedance... 4 Ohms Frequency Response... 100Hz to 20kHz 4 Coaxial Speakers Power Handling...40w RMS - 80w PEAK Impedance... 4 Ohms Frequency Response... 100Hz to 20kHz
Accessories Remote Mountable Amplifier Voltage Display Compact Size for Easy Installation in Any Vehicle Backlit Blue Display for Excellent Day and Night Time Viewing Plugs Into the RMD port on RX, SX, Ti and Elite Includes all Mounting Hardware and Cable Remote Bass Level Control Allows 20dB of Subwoofer Level Adjustment No housing, simple flush mountable knob Cable and Mounting Hardware Included For Use with Ti2, SX and RX amplifiers RBCF RMDRemote Mountable Amplifier Voltage Display G11212 inch Subwoofer Grill Powder Coated Protective Metal Grill Stealth Mounting Design Hides Mounting Screws Rubber Mounting Gasket Eliminates Vibrations or Air Leaks Fits Current 12 inch Models: RX1, SX1, SXt, Fits Older 12 inch Models: R1, R2, R3, SL *(Does not Fit Ti or Elite 12 inch models) G11010 inch Subwoofer Grill Powder Coated Protective Metal Grill Stealth Mounting Design Hides Mounting Screws Rubber Mounting Gasket Eliminates Vibrations or Air Leaks Fits Current 10 inch Models: RX1, SX1, SXt, Fits Older 10 inch Models: R1, R2, R3, SL *(Does not Fit Ti or Elite 10 inch Models) 38
PG DECALS Phoenix Gold Black Gold Decal 6 x 1... PGDECAL1 9.75 x 1.75... PGDECL12W 36 x 4... PGDECAL2 9.75 x 1.75... PGDECL12B 4 x 1...PGDECAL3W 4 x 1...PGDECAL4B Promo Items PG BANNERS Phoenix Gold Banner 18 x 24...PGDBANNER12 3 x 5... PGBANNER12
PhoenixGold.com A Division of AAMP of America 13190 56th Courth, Suite 451 Clearwater, Fl 33760 Sales: 800-477-2267 Tech Support: 866-788-4237 2014 AAMP of Florida, Inc. SPECIFICATIONS SUBJECT TO CHANGE