Thanks for shopping with Improvements! Needham TV/Media Stand Item #437093 To order, call 1-800-642-2112 West Chester, OH 45069 Made of China 0715 If you have questions regarding this product, call 1-800-642-2112 Mon.-Fri. 9:00-5:00 EST (Ohio) and ask for our product specialists, or e-mail: productspecialist@improvementscatalog.com See many more products on the Internet! www.improvementscatalog.com If you have any questions regarding this product, 1
Parts List Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Do not return to store/retailer. Using hardware that is too long will cause damage. Before beginning assembly, separate each type of hardware. Carefully study the hardware diagrams below. You may receive extra hardware with your unit A B C D Drawer Face Panel Drawer Left Side Panel E F G Drawer Right Side Panel Drawer Bottom Panel H Drawer Back Panel Bottom Panel Left Middle Panel I J K Right Middle Panel L Fixed Shelf Left Side Panel Right Side Panel M N O Support Post P Left Door Right Door Top Panel Q R S Back Panel Middle Adjustable Shelf Left Adjustable Shelf Right Adjustable Shelf
Parts List Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Do not return to store/retailer. Using hardware that is too long will cause damage. Before beginning assembly, separate each type of hardware. Carefully study the hardware diagrams below. You may receive extra hardware with your unit 2 2 (3) (4) (5) (6) (7) 0 of 3 Magnet of 3 3.5mm x 15 mm Screw For Magnet (8) 3.5mm x 12 mm Screw For Back Metal Knob 5/32 x 15mm Bolt For Metal Knob Metal Nut (9) (10) 2 (11) (12) 1/4 x 38mm Bolt For Drawer Metal Pin (13) (14) Bracket (15) 3.5mm x 15 mm Screw For Bracket Plastic Anchor 7mm x 38mm Screw For Wall Plastic Chain Care and Cleaning Instructions: Before using, wipe with a clean, dry cloth. Periodically apply furniture wax to renew the finish. Avoid rubbing or scratching the Assembly Tool Required No. 2 Phillips Screwdriver surface with rough or abrasive objects. Assembly Tool Required No. 2 Phillips Screwdriver (Not Included)
: Wood may scratch easily. Be careful when assembling. Do not scratch. Step 1. Unpack and lay parts on clean, padded surface like carpet or blanket. Check that you have all parts indicated on the front page. Step 2. Insert the s into predrilled holes in Left Middle Panel(G). Step 3. Attach Left Middle Panel(G) to the Bottom Panel(F) with Bolt. Figure 1 Step 1. Insert the s into predrilled holes in Fixed Shelf(I). Step 2. Attach Fixed Shelf(I) to the Left Middle Panel(G). Figure 2
Step 1. Insert the s into predrilled holes in Fixed Shelf(I) and Right Middle Panel(H). Step 2. Attach Right Middle Panel(H) to the Fixed Shelf(I) and Bottom Panel(F) with Bolt, then fasten them. Figure 3 Step 1. Insert the s into predrilled holes in Bottom Panel (F). Step 2. Attach Side Panels(J,K) to the Bottom Panel(F) with Bolt, then fasten them. Figure 4 Step 3. Attach Support Post(L) to the Bottom Panel(F) with Bolt, then fasten them. of 6 Step 1. Attach the Left Door(M) to the Left Side Panel(J) and Right Door(N) to the Right Side Panel(K). Step 2. Attach Handle(6) to Doors(M,N) with Bolt For Handle(7). Figure 5 (6) Metal Knob (7) 5/32 x 15mm Bolt For Metal Knob
Step 1. Attach the Magnet(3) to the Top Panel(O) with Screw For Magnet(4), then fasten them. Figure 6 (3) (4) Magnet 3.5mm x 15 mm Bolt For Magnet Step 1. Insert the s into predrilled holes in Side Panels(J,K) and Middle Panels(G,H). Step 2. Attach Top Panel(O) to the Side Panels(J,K) and Middle Panels(G,H) with Bolt, then fasten them. Figure 7 of 8 of 8 Step 1. Attach the Back Panel(P) with Screw For Back(5). Figure 8 (5) 3.5mm x 12mm Screw For Back 0
Step 1. Attach the Drawer Side Panels(B,C) to Drawer Face Panel(A) with Bolt through outer predrilled holes in Drawer Side Panels(B,C). Step 2. Put the Drawer Bottom Panel(D) into inner grooves of Drawer Side Panels(B,C) and Drawer Face Panel(A). Step 3. Insert Nut(8) into predrilled holes on Drawer Back Panel(E), then be attach Drawer Back Panel(E) to end side of Drawer Side Panels(B,C), fasten with Bolts for Drawer(9). Step 4. Attach Handle(6) to Drawer Face Panel(A) with Bolt For Handle(7). (6) Metal Knob Figure 9 (7) 5/32 x 15 mm Bolt For Metal Knob (8) Metal Nut (9) 1/4 x 38 mm Bolt For Drawer Step 1. Place Drawer on Middle Panel(G,H). Step 2. Insert s into predrilled holes Drawer Side Panel(B,C). Step 3. Insert the Metal Pins(10) into desirous holes of inner Side Panels(J,K) and Middle Panels(G,H). Step 4. Put the Adjustable Shelves(Q,R,S) on the Metal Pins(10) in each section. Figure 10 (10) 2 Metal Pin
Step 1. Attach Bracket(11) to the Side Panel(J,K) with Screw For Bracket(12). Step 2. Drill 1/4 pilot holes in near proximity of the Bracket(11) attached to the Side Panel(J,K) and tap the Plastic Anchor(13) into wall. Step 3. Fasten Bracket(11) using Screw For Wall(14) into the Plastic Anchor(13). Figure 11 (11) Bracket (12) (13) 3.5mm x 15 mm Screw For Plastic Anchor (14) 7mm x 38 mm Screw For Wall Step 1. Move this item to the fastened wall Bracket(11) and tie in both Bracket(11) with Plastic Chain(15) as shown in diagram. Figure 12 (15) Plastic Chain