MS986400TX- Antique White Finishing MS986500TX- Espresso Finishing For assistance with assembly contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com www.seidal.com PO#:12778
Parts List Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Using hardware that is too long will cause damage. Before beginning assembly, separate each type of hardware. Carefully study the hardware diagrams below. You may receive extra hardware with your unit A B C Top Panel Left Middle Panel Right Middle Panel D E F Left Side Panel Right Side Panel Bottom Panel G H I of 4 Apron Frame Leg Back Panel J K L Left Door M Right Door N of 2 Left Middle Door O Right Middle Door Side Shelf Middle Shelf
Parts List Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Using hardware that is too long will cause damage. Before beginning assembly, separate each type of hardware. Carefully study the hardware diagrams below. You may receive extra hardware with your unit (1) 6 (2) of 24 (3) of 2 8mm x 30 mm Wood Dowel 1/4 x 1 Bolt (4) (5) (6) 0 Single Magnet of 32 Double Magnet 3.5mm x 15 mm Screw For Magnet (7) (8) (9) Flat Washer 6 1/4 x 1-1/2 Allen Bolt Allen Wrench (10) (11) (12) of 24 3.5mm x 12 mm Screw For Back of 4 3.5mm x 12 mm Screw For Door Metal Handle 5/32 x 12mm Bolt For Handle (13) 2 P Metal Pin Middle leg Care and Cleaning Instructions: Before using, wipe with a clean, dry cloth. Periodically apply furniture wax to renew the finish. Avoid rubbing or scratching the Assembly Tool Required No. 2 Phillips Screwdriver surface with rough or abrasive objects. For replacement parts or questions, please call Customer Service at 1-800-633-5096. Please call manufacturer for assistance, questions or parts. Assembly Tool Required No. 2 Phillips Screwdriver (Not Included)
: Wood may scratch easily. Be careful when assembling. Do not scratch. Step 1. Unpack and lay parts on clean, padded surface like carpet or blanket. Check that you have all parts indicated on the front page. Step 2. Put the Top Panel (A) on the soft working surface. Step 3. Attach the Single Magnet(3) and Double Magnet(4) to the Top Panel(A) with Screw For Magnet(5), then fasten them. (3) of 2 Single Magnet (4) Double Magnet (5) 0 Figure 1 3.5mm x 15mm Screw For Magnet Step 1. Insert the Wood Dowels(1) into predrilled holes in Top Panel(A). Step 2. Attach Middle Panels(B,C) and Right side Panel(E) to the Top Panel(A) with Bolt(2)and flat Washer(6), then fasten them. (1) 8mm x 30 mm Wood Dowel of 6 (6) of 6 Washer Figure 2 (2) 1/4 x 1 Bolt of 6
Step 1. Insert the Wood Dowels(1) into predrilled holes in Bottom Panel(F) and Middle Panels(B,C) as pictured. Step 2. Attach the Bottom Panel(F) to the Right Side Panel(E) and Middle Panels(B,C). Figure 3 (1) 8mm x 30 mm Wood Dowel of 6 Figure 4 Step 1. Insert the Wood Dowels(1) into predrilled holes in Bottom Panel(F). Step 2. Attach Left Side Panels(D) to the Top Panel(A) and Bottom Panel (F) with Bolt(2) and flat (1) (6) (2) Washer(6), then fasten them. of 2 8mm x 30 mm Wood Dowel 0 Washer 1/4 x 1 Bolt 0 Step 1. Attach Apron Frame (G) as Picture with Bolt(2) and Washer (6), then fasten them. (6) Washer Figure 5 (2) 1/4 x 1 Bolt
F P Step 1. Put the flat Washer(6) into Allen Bolt (7), attach the Legs(H) into corner block with Allen Bolt (7) by Allen Wrench(8), Then fasten them. Step2. Attach the Middle leg (P) to bottom panel (F) as shown (6) Washer (7) 1/4 x 1-1/2 Allen Bolt Figure 6 (8) Allen Wrench Step 1. Attach the Back Panel(I) as pictured with Screw For Back(9), then fasten them. Figure 7 (9) 3.5mm x 12mm Screw For Back 6 Step 1. Attach Left Door(J) to Left Middle Panel(B) with Screw For Door(10), then fasten them. Step 2. Attach Right Door(K) to Right Middle Panel(C) with Screw For Door(10), then fasten them. Figure 8 (10) 3.5mm x 12mm Screw For Door 2
Step 1. Attach Left Middle Door (L) to Left Middle Panel(B) with Screw (10) for Door, then fasten them. Step 2. Attach Right Middle Door (M) to Right Middle Panel(C) with Screw (10) for Door, then fasten them. Step 3. Attach Handle (11) to Doors(L,M) with Bolt For Handle(12). (10) 3.5mm x 12mm Screw For Door 2 (11) Metal Handle Figure 9 (12) 5/32 x 12mm Bolt For Handle of 4 Step 1. Insert Metal Pins(13) to Side Panels (D,E) and Middle Panels(B,C). Step 2. Put the Shelves (N,O) above the Metal Pins(13). Now your Media Stand is ready to use Figure 10 (13) Metal Pin 2
Parts Replacement Form Customer Information Name Address City/State/Zip Code Phone Number Please indicate where you purchased this item: Store/Website/Catalog Please indicate color/size/style number: Style No Parts Letter Parts Description Needed Please immediately examine this product carefully. Any request for missing parts or damage replacement must be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time frame. Parts will not be available for items arriving fully assembled. We do not recommend modifying product(s) and we are not responsible for any damages due to product modification(s). If damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement merchandise. Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am 4pm Mon-Fri Central time if you have product issues or email us at service@seidal.com. Please ask for customer service representative for issues involving damages or replacement parts. Please ask for technical assistance representative for any issues with product and assembly/construction. Please contact the retailer that you purchased from for returns. Customer Service 1-800-633-5096 service@seidal.com Southern Enterprises, Inc. 600 Freeport Parkway, Suite 200 Coppell, Texas 75019
CAUTION The top shelf is intended for a flat screen television with a maximum overall width of 46 and supports up to 175 lb. The top shelf is NOT INTENDED for tube televisions. Each shelf should not be loaded with more than 20 lb. DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the maximum sizes and weights indicated may result in instability causing possible injury. This unit contains a permanent warning sticker located on under side of top shelf or inside drawer. Do not allow children under 16 years to move the cart. Model: MS986500TX/6400TX Dynasty TV/Media Stand Southern Enterprises, Inc 600 Freeport Parkway, Suite 200 Coppell, Texas, 75019 Manufacture Date: 01/21/2011