S999200TX Eclectic TV/edia Stand ssembly Instructions PO# Page 1
Eclectic TV/edia Stand Parts ist Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface like carpet or blanket. heck that you have all parts indicated. all customer service if hardware is missing. efore beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures. Using the incorrect hardware will cause damage. 1 2 3 4 left middle panel right middle panel big fixed shelf small middle panel 5 6 7 8 small fixed shelf left side panel right side panel bottom panel 9 10 11 12 door top panel upper back panel lower back panel 13 14 15 16 Of 3 middle adjustable shelf side adjustable shelf drawer front panel drawer right side panel 17 18 19 20 Of 3 drawer left side panel drawer back panel drawer bottom panel drawer front panel 21 22 23 24 drawer back panel drawer bottom panel drawer front panel drawer front panel Page 2
Eclectic TV/edia Stand Parts ist Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface like carpet or blanket. heck that you have all parts indicated. all customer service if hardware is missing. efore beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures. Using the incorrect hardware will cause damage. 25 26 27 28 drawer front panel drawer left side panel drawer right side panel drawer back panel 29 drawer bottom panel Of 32 Of 8 Of 8 6 wood dowel cam bolt cam lock bolt ia: 1/4 x 1-1/4 E F G 6 6 6 ia: 1/8 x 0.5 bolt ø1/4 x 1/2 metal washer allen wrench screw for back I J K Of 8 Of 40 ia: 1/8 x 5/8 ia: 3/16 x 1-1/4 magnet screw for magnet shelf holder bolt for drawer O P Of 40 Of 8 nut short bolt knob knob Page 3
Eclectic TV/edia Stand Parts ist Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface like carpet or blanket. heck that you have all parts indicated. all customer service if hardware is missing. efore beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures. Using the incorrect hardware will cause damage. Q R S Of 4 knob handle steel wheels are and leaning Instructions: efore using, wipe with a clean, dry cloth. Periodically apply furniture wax to renew the finish. void rubbing or scratching the surface with rough or abrasive objects. For replacement parts or questions, please call customer service at 1-800-633-5096. Page 4
Eclectic TV/edia Stand ssembly Instructions (3) (1) Insert 4 pcs cam locks () into holes on fixed shelf (3). Screw 4pcs cam bolts () into holes on left middle panel (1) and right middle panel (2). ttach left middle panel (1) and right middle panel (2) to fixed shelf panel (3) by inserting wood dowels () and cam bolts () into corresponding holes until all panels meet. ote: ake sure the holes for the wood dowels on fixed shelf (3) are facing up as shown on the illustration. Tighten by rotating cam locks () clockwise with (2) Phillips screwdriver. Figure 1 (4) (4) (1) Insert 4 pcs cam locks () into holes on small fixed shelf (5). Screw 4pcs cam bolts () into holes on right middle panel (2) and right side (5) (5) (2) (3) panel (7). ttach assembled unit and right side panel (7) to small fixed shelf panel (5) by Inserting wood dowels () and cam bolts () into corresponding holes until all panels meet. Tighten by rotating cam locks () clockwise with Phillips screwdriver. (7) ttach small middle panels (4) to assembled unit as shown in figure 2 by inserting wood dowels into corresponding holes on fixed shelf (3). Figure 2 Page 5
Eclectic TV/edia Stand ssembly Instructions (8) (6) (4) (4) (2) (1) ttach bottom panel (8) to assembled unit and left side panel (6) by inserting wood dowels into corresponding holes until bottom panel (8), assembled unit 2, and left side panel (6) meet. Use 8 pcs bolts () to connect bottom panel (8) to left side panel (6) and assembled unit. Tighten bolts () with Phillips screwdriver. (7) Figure 3 S S Use bolts (E) through metal washer (F) to connect steel wheels (S) to bottom panel (8). Tighten bolts (E) with allen wrench (G). G E F E F T (S) (8) Figure 4 Page 6
Eclectic TV/edia Stand ssembly Instructions ttach door (9) to left side panel (6). (7) Use bolt () to connect knob (O) to door (9). Tighten bolt () with Phillips screwdriver. (2) (6) (1) O (9) () Figure 5 (10) ttach top panel (10) to assembled unit by inserting wood dowels () into corresponding holes until assembled unit and top panel (10) meet. (2) (7) Use bolts () to connect assembled unit to top panel (10). Tighten bolts () with Phillips screwdriver. (6) (1) Figure 6 Page 7
Eclectic TV/edia Stand ssembly Instructions Insert upper back panel (11) and lower back panel (12) into grooves on the back of assembled unit. (10) (1) (6) (11) Tighten screws () with Phillips screwdriver (not included). (7) (2) (12) (8) Figure 7 ttach magnet (I) to corresponding holes of top panel (10) with screws (J). (6) (10) I J K (1) K K (2) (13) Insert shelf holder (K) into desired holes of the middle panels (1), (2) and left side panel (6). Then, place middle adjustable shelf (13) and side adjustable shelf (14) onto the shelf holders (K). K (14) Figure 8 Page 8
Eclectic TV/edia Stand ssembly Instructions Insert nuts () into holes on drawer front panel (15). ttach drawer side panels (16) and (17) to drawer front panel (15) with bolts (). O (18) (19) (16) (15) (17) Q Tighten bolts () with Phillips screwdriver. Insert the drawer bottom (19) into inner grooves of drawer side panels (16), (17) and drawer face panel (15). Insert nuts () into holes on drawer back panel (18), then, attach drawer back panel (18) to ends of drawer side panels (16) and (17). Tighten bolts () with Phillips screwdriver. ttach knob (Q) to drawer face panel (15) with Figure 9 bolt (). Insert nuts () into holes on drawer front panel (20). ttach drawer side panels (16) and (17) to drawer front panel (20) with bolts for drawer (). (21) (22) (16) (17) Tighten bolts for drawer () with Phillips screwdriver. Insert the drawer bottom (22) into inner grooves of drawer side panels (16), (17) and drawer front panel (20). (20) P Insert nuts () into holes on drawer back panel (21). Then, attach drawer back panel (21) to ends of drawer side panels (16) and (17). Tighten bolts () with Phillips screwdriver. Figure 10 ttach knob (P) to drawer front panel (20) with bolt (). Page 9
Eclectic TV/edia Stand ssembly Instructions Insert nuts () into holes on drawer front panel (23). ttach drawer side panels (16) and (17) to drawer front panel (23) with bolts for drawer (). (21) (22) (17) Tighten bolts for drawer () with Phillips screwdriver. (16) Insert the drawer bottom (22) into inner grooves of drawer side panels (16), (17) and drawer front panel (23). (23) P Insert nuts () into holes on drawer back panel (21). Then, attach drawer back panel (21) to ends of drawer side panels (16) and (17). Tighten bolts () with Phillips screwdriver. Figure 11 ttach knob (P) to drawer front panel (23) with bolt (). Insert nuts () into holes on drawer front panel (28) (29) (27) (24). ttach drawer side panels (26) and (27) to drawer front panel (24) with bolts for drawer (). Tighten bolts for drawer () with Phillips screwdriver. Insert the drawer bottom (29) into inner grooves of drawer side panels (26), (27) and drawer front (26) R panel (24). (24) Insert nuts () into holes on drawer back panel (28). Then, attach drawer back panel (28) to ends of drawer side panels (26) and (27). Tighten bolts () with Phillips screwdriver. ttach knob (R) to drawer front panel (24) with Figure 12 bolts (). Page 10
Eclectic TV/edia Stand ssembly Instructions (27) Insert nuts () into holes on drawer front panel (24). ttach drawer side panels (26) and (27) to drawer front panel (25) with bolts for drawer (). (28) (29) Tighten bolts for drawer () with Phillips screwdriver. Insert the drawer bottom (29) into inner grooves (26) R of drawer side panels (26), (27) and drawer front panel (25). (25) Insert nuts () into holes on drawer back panel (28). Then, attach drawer back panel (28) to ends of drawer side panels (26) and (27). Tighten bolts () with Phillips screwdriver. Figure 13 ttach knob (R) to drawer front panel (25) with bolts (). Insert all drawers into assembled unit as shown in figure 14. ow your new TV/edia stand is ready to use. (24) (15) (20) (23) (25) Figure 14 Page 11
Parts Replacement Form ustomer Information ame ddress ity/state/zip ode Phone umber Please indicate where you purchased this item: Store/Website/atalog Please indicate color/size/style number: Style o Parts etter Parts escription eeded Please immediately examine this product carefully. ny request for missing parts or damage replacement must be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time frame. Parts will not be available for items arriving fully assembled. We do not recommend modifying product(s) and we are not responsible for any damages due to product modification(s). If damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement merchandise. Please contact Southern Enterprises at 800-633-5096 or in allas 972-869-0111/ 9am 4pm on-fri entral time if you have product issues or email us at service@seidal.com. Please ask for customer service representative for issues involving damages or replacement parts. Please ask for technical assistance representative for any issues with product and assembly/construction. Please contact the retailer that you purchased from for returns. odel: S999200TX Eclectic TV/edia Stand Southern Enterprises, Inc 600 Freeport Parkway, Suite 200 oppell, Texas, 75019 anufacture ate: 04/5/2014
UTIO The top shelf is intended for a flat screen television with a maximum overall width of 50 and supports up to 175 lb. The top shelf is OT ITEE for tube televisions. Each shelf should not be loaded with more than 20 lb. Each drawer box should not be loaded with more than 10 lb. O OT EXEE REOEE O. Use with products heavier than the maximum sizes and weights indicated may result in instability causing possible injury. This unit contains a permanent warning sticker located on under side of top shelf or inside drawer. o not allow children under 16 years to move the cart. odel: S999200TX Eclectic TV/edia Stand Southern Enterprises, Inc 600 Freeport Parkway, Suite 200 oppell, Texas, 75019 anufacture ate: 12/31/2010