TABLES SAWS Laguna Fusion 10 tablesaw Laguna Platinum 10" Tablesaw Laguna Platinum Dovetail 10 Tablesaw BANDSAWS Laguna 14 Bandsaw 14 Twelve Laguna LT14 SUV Bandsaw Laguna 18 Bandsaw LT 18 3000 PLANERS / THICKNESSERS Laguna Planer 16 ShearTec II Laguna Planer 20 4 Post Planer Laguna Planer 20 HD Planer Laguna Planer 25 HD Thicknesser JOINTERS Laguna 6 Jointer Laguna 6 ShearTec II Jointer Laguna 8 Wedgebed Jointer with Shear-Tec Laguna 8 Parallelogram Jointer with Shear-Tec Laguna 12 Parallelogram Jointer with Shear-Tec ROUTER AND SPINDLE MOULDING Laguna Pro Spindle Moulder LATHE Laguna Lathe REVO 24 x 36 3HP
Laguna Fusion 10 tablesaw LT*FUSION-10/1 Wheels are built in Fence Storage Quick change riving knife & precision fence with Hairline readout Push Stick is mounted onto the Rip Fence for convenience Double Miter Slot Motor: 1 3/4 HP, 1 phase Blade Diameter: 10 (254mm) Arbor: 5/8 Max Dado: 13/16 Quick Release Riving Knife: Yes Safety Blade Guard: Yes Rip Capacity Right: 36 (915mm) optional 52 (1320mm) Rip Capacity Left: 12 (305mm) Blade Tilt: 90-45 Cast Iron Table: 20 x 27 (508mm x 685mm) Cast Iron Table Extension X 2: 12 x 27 (305m x 685mm) Table Height: 34 1/2 (876mm) Built-In Wheel System: Yes Miter Slots x 2: 3/4 x 3/8 (19mm x 9.5mm) Dustport: 4 (100mm) Drive: 1 + 1 Belt Weight Net/Ship: 266/349 Lbs. (120 / 158kg)
Laguna Platinum 10 Tablesaw LT*PLATINUM-10/1 Precision ground table made of premium grade cast iron, heat treated and ground to a mirror like finish. Massive widely spaced cabinet mounted trunnions: perfectly machined to high accuracy to support the heavy duty saw carriage. Quick release riving knife with access through throat plate. Robust spindle supported by two precision ball bearings. Triple V-belt drive system mounted between the two spindle bearings. EZ Glide T square system for accuracy, repeatability and easy operation. Standard precisely machined miter gauge with adjustable miter bar. Minimal vibration that ensures proper blade alignment. CSA, UL, CE certified. Motor: 3HP Leeson single phase Blade Diameter: (250mm) Left hand blade tilt: 0-45 Depth of cut: 90 80mm, 45 57mm Rip capacity: 762mm, Optional: 1300mm Arbor spindle size: 16mm: Contact Assembled table dimension: 1000 x 675 x 850mm H Dado diameter: 200mm, Maximum width: 20mm Mitre slots X 2: 19 x 9.5mm Dust port: 100mm (E-Z remove) Drive: 3 x V-belt Weight: 220Kgs
Laguna Platinum Dovetail 10 Tablesaw LT*DOVETAIL-10/1 Precision ground table made of premium grade cast iron, heat treated and ground to a mirror like finish. Heavy duty supported saw carriage in precision machined dovetails: perfectly machined to high accuracy to support the heavy duty saw carriage. Quick release riving knife with access through throat plate. Robust spindle supported by two precision ball bearings. Triple V-belt drive system mounted between the two spindle bearings. EZ Glide T square system for accuracy, repeatability and easy operation. Standard precisely machined miter gauge with adjustable miter bar. Minimal vibration that ensures proper blade alignment. CSA, UL, CE certified. Motor: 3HP Leeson single phase Blade Diameter: (250mm) Left hand blade tilt: 0-45 Depth of cut: 90 80mm, 45 57mm Rip capacity: 1300mm Arbor spindle size: 16mm: Contact Assembled table dimension: 1600 x 675 x 850mm H Dado diameter: 200mm, Maximum width: 20mm Mitre slots X 2: 19 x 9.5mm Dust port: 100mm (E-Z remove) Drive: 3 x V-belt Weight: 250Kgs
Laguna 14 Bandsaw 14 Twelve LT*B/SAW-1412 Euro-style hinges & ceramic guides Tension window, tracking window & tension indicator Worm gear rack & pinion upper guide Tension quick release Cast iron wheels Flat Poly-groove drive belt Brass-tipped lock handle for rip fence Adjustable anodized aluminium throat plate Table 540mm x 405mm & height 965mm 90 positive stop 45 table-tilt right / 7 table-tilt left Hi / low aluminium fence 460mm x 140mm x 12mm Heavy duty cast trunion 200mm x 330mm Motor: 1 3/4 HP TEFC single phase Blade length: 2920mm Min-Max width of blade: 3mm 19mm Resaw capacity: 335mm Throat Capacity: 330mm Dust Port: 100mm Dimensions: 635mm x 460mm x 1785mm high Shipping dimensions: 1400mm x 565mm x 565mm Weight: 117kgs *Does not include blade* Please see our accessories for blade options.
Laguna LT14 SUV Bandsaw LT*B/SAW-14SUV 14 of resaw capacity requires more power & blade width, so Laguna equipped the LT14 SUV with a 3HP Leeson motor & gave it a 1 blade capacity. Coupled with the Laguna Resaw King blade, this saw makes cutting large stock into smaller workpieces, OR slicing wafer thin veneers a breeze. Strong table lock designed to last Rubber-seals inside doors for improved dust collection & lower noise level Windows for easy blade tracking adjustments Large leveling pads for extra suitability Large and well designed handles & wheels Quick release blade tension Foot brake with micro switch Rack and pinion table tilt 45 R, 15 L Rack and pinion upper guide Motor: 3HP 1 Phase Min-Max blade width: 0.125 25.4mm Resaw Capacity: 355mm Throat: 336mm Blade Length: 3175mm Cast Table Size: 500 x 400mm Table Height: 900mm Dust Ports: 100mm Overall Height: 1778mm Dimensions: 762 X 915 X 1905mm Net Weight: 154kg Weight (Ship): 170kg *Does not include blade* Please see our accessories for blade options.
Laguna 18 Bandsaw LT 18 3000 LT*B/SAW18-3000 Meet the senior member of our Bandsaw family the LT18 3000 Series that has been designed to improve your performance. All of the Laguna innovations are included, such as the patented and award winning Laguna Ceramic Guides, massive three horsepower motor, rack and pinion tilt system to tilt the table and counter balanced with a gas spring. Motor: 3HP 1 Phase Resaw capacity: 385mm Throat: 440mm Min-Max blade width: 3.0 31.75mm (1/8-1 1/4 ) Dust Ports: 2 x 100mm Cast Table Size: 510 x 510mm Nitrogen cylinder table tilt Blade Length: 3685mm Table Height: 900mm Overall Height: 1875mm Gross Weight: 254kg Net Weight: NW 238kg *Does not include blade* Please see our accessories for blade options.
Laguna Planer 16 ShearTec II LT*THICK-16/1 With optional keypad lockout system fitted Depth of cut digital readout with tape backup ShearTec ll helical cutter head Mechanical adjustment of bed Mechanical adjustment of bed rollers 2 cast iron extension tables 2 polished steel rollers for material return Internal caster system for mobility Width of cut: 400mm (16 ) Motor: 3 HP,1 PH Table: 1400 X 400mm including 2 x extensions 6 Rows of 18 helical knives = 108 total 2 Feed Speeds: 4.8 & 6.0 metres / min Dust-hood: 100mm Max removal: 3mm (1/8 ) per pass Min-Max: 4.8 153mm (3/16 6 ) Dimensions: 875 x 1400 x 1125mm high Net Weight: 258 kg Gross Weight: 304 kg
Laguna Planer 20 4 Post Planer Depth of cut digital readout with tape backup Table: 1442 x 508mm wide including 2 x extensions 6 rows ShearTec II helical cutterheads with four sided German carbide knife inserts Mechanical adjustment of bed Mechanical adjustment of bed rollers 2 Cast iron extension tables 2 Steel rollers for material return Internal caster system for mobility Width of cut: 500mm (20 ) Motor: 3 HP, 1 PH 5 HP, 3 PH 6 rows of 23 helical knives = 138 total knives 2 x feed speeds: 4.8 & 6.0 metres / min 125mm dust hood Max removal: 3mm per pass Min-Max depth of cut: 4.8mm 203mm (3/16 8 ) Overall dimensions with cast iron extension tables installed: 990 x 1524 x 1143mm high Net Weight: 399kg Gross Weight: 449kg
Laguna Planer 20 HD Planer LT*THICK-20HD/3 500mm (20 ) width of cut Depth of cut digital readout with tape backup 6 rows ShearTec II helical cutterheads with four sided German carbide knife inserts Mechanical adjustment of bed Mechanical adjustment of bed rollers Fully enclosed cabinet Motor: 10 HP, 3 PH 6 rows of 23 helical knives = 138 total knives 2 x feed speeds: 4.8 & 6.0 metres / min 125mm dust hood Overall dimensions with cast iron extension tables installed: 990 x 1575 x 1170mm high Weight: 544kg
Laguna Planer 25 HD Thicknesser LT*THICK-25IND3 Solid cast Sheartec II helical head with four-sided insert tooling, Built with digital readout & simple PC controller Segmented infeed roller with segmented chip breakers Infeed & outfeed rollers are supported by four large & sealed needle bearings for long life Table rollers built with a quick-set lever to raise & lower the table Heavy cast iron frame & extra wide side panels with gibs Large precision ground table contains two adjustable table rollers 3 speed feed selector allows quick feed rate changes 10 pieces 4-sided carbide inserts with 10 screws & 2 screwdrivers Ø150mm / Ø127mm dust port adaptor 4 foot pads Motor: 11100W/415V (3PH -15HP) Max planning width: 635mm Planning thickness: 4-230mm Max chip removal: 6mm Feed speed: 6, 8, 10m/min Segmented infeed roller dia.: 76mm Steel outfeed roller dia.: 65mm (x2) Bed rollers: 2 Table size: 820 x 660mm Max work piece length: 250mm Cutter block speed: 5000RPM Cutter block dia.: 86mm No. of knives helical head: 174 Weight: 720Kgs Dimensions: 1320 x 915 x 1500mm
Laguna 6 Jointer LT*JOINTER-6/1 3 High Speed Steel blades 1422mm long bed allows for longer work pieces Enclosed steel stand In-feed table adjustment wedge bed with lever Motor 1.5 HP Single phase Cutter-Head: 5000 RPM Cutting Width: 150mm Cutting Depth: 12.5mm 3 HSS Blades Cutter-Head Diameter: 60mm Table Dimensions: 150 X 1422mm Fence Dimensions: 100 X 736mm Fence Tilt: 90 & 45 with Positive Stop Table Height: 805mm Dust port: 100mm
Laguna 6 ShearTec II Jointer LT*JOINTER-6/1H 6 row ShearTec II helical cutterhead Deep gullets in the head allow chips to exit fast & keep the machining area clear of chips 42 four-sided German carbide helical cutter inserts set into the head on a flat landing surface which allows more torque to be applied when fixing Inserts are slightly angled to give a shear type cut with low impact and less kick-back Insert leading edge crowned to prevent lines appearing 6 rows of cutters in each head for premium results 1422mm long bed allows for longer work pieces Enclosed steel stand In-feed table adjustment wedge bed w lever Motor 1.5 HP Single phase Cutter-Head: 5000 RPM Cutting Width: 150mm Cutting Depth: 12.5mm 4 Sided Solid Carbide 6 Rows X 7 = 42 inserts Cutter-Head Diameter: 60mm Table Dimensions: 150 X 1422mm Fence Dimensions: 100 X 736mm Fence Tilt: 90 & 45 with Positive Stop Table Height: 805mm Dust port: 100mm
Laguna Jointer 8 Wedgebed Jointer with Shear-Tec LT*JOINTER-8/1W Oversized table give maximum support for long work pieces. Precision ground cast in and out feed tables feature independent adjustment on dovetail ways Deep gullets in the head allow chips to exit fast & keep the machining area clear of chips. Inserts are slightly angled to give a shear type cut with low impact and less kick-back action. Oversized table give maximum support for long work pieces Precision ground cast in and out feed tables feature independent adjustment on dovetail ways Deep gullets in the head allow chips to exit fast & keep the machining area clear of chips Inserts are slightly angled to give a shear type cut with low impact and less kick-back action 54 four-sided German carbide helical cutter inserts set into the head on a flat landing surface which allows more torque to be applied when fixing Inserts leading edge crowned to prevent lines appearing 6 rows of cutters in each head for premium results Enclosed steel stand Motor: 2HP single phase 10A Cutter-Head: 5600 RPM Fence Tilt: 45 Degree. 90 & 45 positive stop Width of cut: 200mm Depth of cut: 12.5mm Rabbeting capacity: 12.5mm 4 Sided carbide inserts 6 Row X 9 = 54 Cutter-Head Diameter: 75mm Table Dimensions: 228 x 1803mm Fence Dimensions: 120 X 1009mm Table height: 800mm Weight: 231kg Dust port: 100mm
Laguna 8 Parallelogram Jointer with Shear-Tec LT*JOINTER-8/1 Adjustment: Parallelogram with crank allows the table to move in the same arc as the cutter-head when raised or lowered, keeping clearance to a minimum. 6 row Shear Tec II helical cutter-head for premium results Deep gullets in the head allow chips to exit fast and keep the machining area clear of chips 54 four-sided German carbide helical cutter inserts set into the head on a flat landing surface which allows more torque to be applied when fixing Inserts angled to give a shear cut with low impact and less kick-back action edge crowned to prevent lines appearing Built in mobility wheels with locking screws Fully enclosed steel cabinet protects motor and mechanics 2108mm long bed allows for very long work pieces Bed length: 2108mm Motor: 3 HP single Phase, 15 Amp Cutter head: 5200 RPM Cutter-head diameter: 75mm 4 sided carbide inserts 6 rows x 9 = 54 Width of cut: 200mm Fence Tilt: 90 & 45 with Positive Stop Table dimensions: 2108 x 200mm Fence dimensions: 914 x 127mm Table height : 838mm Dust port: 100mm Overall dimensions: 2108 x 635 x 1193mm Weight: gross 319kg, net 248kg
Laguna 12 Parallelogram Jointer with Shear-Tec LT*12 L/BEDJOIN Choice of 3 HP Single Phase or 5 HP Phase Three motor. Adjustment: Parallelogram with crank allows the table to move in the same arc as the cutter-head when raised or lowered, keeping clearance to a minimum. 6 row Shear Tec II helical cutter-head for premium results Deep gullets in the head allow chips to exit fast and keep the machining area clear of chips 84 four-sided German carbide helical cutter inserts set into the head on a flat landing surface which allows more torque to be applied when fixing Inserts angled to give a shear cut with low impact and less kick-back action Edge crowned to prevent lines appearing Built in mobility wheels with locking screws 2210 x 305mm bed allows for very large work pieces Fully enclosed steel cabinet protects motor and mechanics Bed size: 2210 x 305mm Motor: 3 HP 1 Phase or 5 HP 3 Phase Cutter head: 5500 RPM Cutter head diameter: 100mm (4 ) 4 sided carbide inserts 6 rows x 14 = 84 Width of cut: 300mm Rabbeting capacity: 19mm Fence Tilt: 90, 45 & 135 Positive stops: 90 & 45 Fence dimensions: 1524 x 137 mm Table height : 838mm Dust port: 152mm Overall dimensions: 2235 x 838 x 1130mm Gross Weight: 488kg Net Weight: 399kg
Laguna Pro Spindle Moulder LT*S/MOULDER/3 Standard digital readout Heavy duty motor Quick change poly-groove belt system Each full revolution of the turn handle gives an exact 1.5mm adjustment to the fence Pre-drilled holes to accept most power feeders Wheel kit built right into the machine base Motor: 7 1/2 HP 3 Phase 415V Table size: 998 X 798 X 89mm Spindle travel: 101mm Spindle size: 19mm and 31mm Spindle speeds: 5000 / 7000 / 10000 RPM Table opening diameter: 185mm Direction: forward / reversing switch Fence: micro adjustment Net Weight: 290kg Ship Weight: 326 kg
Laguna Lathe REVO 24 x 36 3HP LT*LATHE24-36 Motor Power: 3HP single phase reversible Swing over bed: 609mm Distance between centres: 900mm Swing over tool rest base: 508mm RPM: 200 3500 (high) / 50-820 (low) Floor to spindle centre height: 1117mm Maximum outboard turning swing: 863mm Laguna tools is leading the Revo-lution in lathes. The new generation lathe has more mass than an other machine in its class, less vibration and a revolutionary servo motor drive system for much higher torque in low RPM. Expect the REVO to exceed your expectations. Spindle size: 1-1/4 x 8(RH) TPI Spindle bore: 16mm / 5/8 Hole through tailstock: 9.5mm / 3/8 Tailstock quill travel: 115mm Tool rest width: 355mm 304mm cast extension with swing away park system Face Plate: 75mm Net Weight: 349kg Ship Weight: 408 kg