KWS Handrail Systems Architectural Hardware
Technical Information KWS Handrail-Systems - the flexible solution System for handrails in stainless steel and timber Completely pre-assembled or single components for self-assembly Special designs on request Further products and information in catalogue TEK_0407. Texts for invitation to tender as download on the internet at www.woelm.de Number of handrail brackets pieces up to GL 600 3 pieces GL > 600 up to GL 800 4 pieces GL > 800 up to GL 4000 5 pieces GL > 4000 up to GL 5000 Individual dimensions on request Installation notes Recommended mounting height: 850 mm 900 mm Distance between brackets: approx. 800 mm 00 mm (depending on load and wall properties and condition) Use suitable fixing material Observe building regulations Depending on the model from a total length (GL) of 000 mm 500 mm a connection element is used by default (see page 4-6) DIN standards Depending on the model, type and construction the handrails comply with: DIN 804, DIN 805 and DIN 8040 (stairs, handrail) DIN 34 (load requirement) DIN 40 reaction to fire classification A or B (fire behaviour) DIN 6886-B (resistance to chemicals) Certification according to DIN EN ISO 900 Contents Technical Informations... Page Handrail Systems completely pre-assembled (model A-F)... Page 3 Handrail Systems stainless steel - single components (model A,B)... Page 4 Handrail Systems timber - single components (model C,D,E)... Page 5 Handrail Systems timber/stainless steel - single components (model F)... Page 6 Accessories... Page 7 Finishes for timber handrails... Page 8 Order example for timber handrails... Page 8 Angular Handrail-Systems stainless steel (model G,H)... Page 9 Enquiry Form... Page 0 KWS Finishes Chart... Page BEK_HS/07.07
KWS Handrail Systems Handrail Systems Ø 40mm completely pre-assembled Handrail brackets Stainless steel (Details Page 4) Number of handrail brackets see table Page 4545.. 460.. 467.. A 46.. 468.. B Timber (Details Page 5) Number of handrail brackets see table Page C 4547.. 460.. 469.. Ø50 Ø68 Ø68 D 46.. 4630.. Ø70 Ø70 E Timber/stainless steel (Details Page 6) Number of handrail brackets see table Page F 460.. * 460.. * 464.. * Ø68 46.. * 46../46.. 465../466.. Ø70 BEK_HS/07.07 *From a total length of 480 mm, additional mid-point brackets (460../464.. resp. 460../46..) are necessary. 3
Handrail-Systems of stainless steel A/B single components A 3 B 4 from 500 mm with joint 70.80 from 000 mm with joint 70.80 4 KWS - tube Ø 40 mm 8308.8.000 stainless steel Ø 40x.0 mm, L= 000 mm 8308.8.3000 stainless steel Ø 40x.0 mm, L= 3000 mm (special dimensions on request) KWS handrail brackets 4545.. 460.. 467.. 4545.8 with curved saddle and hanger bolt M8, handrail fixing with screw M6 460.8 with curved saddle and rosette Ø 68 mm for screwing-on 46.. 468.. 46.8 like 460.8, but with end cap Ø 70 mm 467.8 with Ø mm rod for welding-on and rosette Ø 68 mm for screwing-on 468.8 like 467.8, but with end cap Ø 70 mm wall distance mm (to centre handrail) 3 KWS end cap 08.8 for tube Ø 40 x.0 mm 4 KWS joints 70.80 for tube Ø 40 x.0 mm, 65 mm long, with two screws 4 BEK_HS/07.07
Handrail-Systems of timber C/D/E single components C D E 4 from 500 mm with connection element KWS - timber Ø 40 mm 7604. Timber handrail Ø 40 mm, L = 500 mm (Timber types and order example see page 9) Special dimensions on request! KWS handrail brackets (Stainless steel) 4547.. 460.. 469.. 4547.8 with curved saddle and hanger bolt M8, handrail fixing with 6 mm wood screw 460.8 with curved saddle and rosette Ø 68 mm for screwing-on 46.. 4630.. 46.8 like 460.8, but with end cap Ø 70 mm 469.8 with thread M and rosette Ø 68 mm for screwing-on 3 KWS bends (stainless steel) 4630.8 like 469.8, but with end cap Ø 70 mm wall distance mm (to centre handrail) 7605. Timber Ø 40 mm (Timber types and order example see page 8) (End piece incl. drill hole Ø 5 mm for wooden dowels!) 4 KWS wooden dowel 790.00 Ø 5 mm (unit = 0 pieces) BEK_HS/07.07 5
Handrail-Systems of timber/stainless steel F single components * from 480 mm with mid-point bracket* KWS - timber Ø 40 mm 7604. Timber handrail Ø 40 mm, L = 500 mm (Timber types and order example see page 8) Special dimensions on request! KWS handrail brackets (stainless steel) 460..* 46.. 46.. 460.8* with curved saddle and screwed-on tube Ø 40 x.0 x 80 mm, rosette Ø 68 mm for screwing on 464..* 465.. 466.. 46.8 with curved saddle and screwed-on right end bend Ø 40 x.0 mm, rosette Ø 68 mm for screwing on 46.8 with curved saddle and screwed-on left end bend Ø 40 x.0 mm, rosette Ø 68 mm for screwing on 460..* 46..* 464.8* like 460.8, but with end cap Ø 70 mm 465.8 like 46.8, but with end cap Ø 70 mm 466.8 like 46.8, but with end cap Ø 70 mm 460.8* with curved saddle and rosette Ø 68 mm for screwing-on 46.8* like 460.8, but with end cap Ø 70 mm wall distance mm (to centre handrail) *Please note the information from page 3 and page 0. 6 BEK_HS/07.07
Accessories Accessories 3 3 Article Description Article Description KWS tube or timber Ø 40 mm 5 KWS joint stainless steel tube, see Page 4 timber, see page 8 70.80-65 mm long with two screws, for tube Ø 40 x.0 mm KWS handrail brackets (Stainless steel) for stainless steel tube see Page 4 for timber see Page 5 454.. 4570.. 4574.. 4608.. 468.. further handrail brackets: 454.8 - with curved saddle and rosette Ø 58 mm for screwing-on 4570.8 - with curved saddle, loose rosette Ø 50 mm and hanger bolt for screwing-on 4574.8 - with curved saddle and rosette Ø 80 mm for screwing-on 4608.8 - straight, height mm, with curved saddle and rosette Ø 68 mm for screwing-on 468.8 - like 4608.8, but with end cap Ø 70 mm 6 KWS end caps 7607. timber end cap, semicircular Ø 40 mm (end pieces incl. drill hole Ø 5 mm for wooden dowel!) 7 KWS drilling template (Kinds of timber and order example see page 8) 79.40 for timber Ø 40 mm, for drilling in centre Ø 5 mm wall distance mm (to centre handrail) 3 KWS ball-and-socket joint 80.8 - for tube Ø 40 x.0 mm 7H80.8 - for timber Ø 40 mm 8 KWS wooden dowel 790.00 Ø 5 mm (unit = 0 pieces) 4 KWS bends 9 KWS fixing kit 73.8 - bend 90 - with drill holes on the side (further stainless steel bends available, see catalogue TEK_0407) 7606. bend 90 (bends 90 of timber incl. two drill holes Ø 5 mm for wooden dowels) (Kinds of timber and order example see page 8) 930.00 93.00 3 piece dowels and 3 wood screws DIN 7995 Ø 6 x 60 mm - A for wall mounting of handrail brackets plug for hanger bolt (unit = 0 pieces) BEK_HS/07.07 7
Finishes for timber handrails Maple, crude brushed Design.5. Maple, varnished Design.5. Beech, crude brushed Design.5. Beech, varnished Design.5. Ash tree, crude brushed Design.5.3 Ash tree, varnished Design.5.3 Walnut, crude brushed Design.5.4 Walnut, varnished Design.5.4 Other timber types on request! Order example: Part number Diameter Processing Design Timber Design 7603 Ø 35 mm Maple crude brushed.5 7603 Ø 35 mm Maple varnished.5 7604 Ø 40 mm Maple crude brushed.5 7604 Ø 40 mm Maple varnished.5 8 BEK_HS/07.07
Handrail-Systems of stainless steel 30 x 30 mm completely pre-installed G H 8540.8 8545.8 KWS handrail 850.8 Stainless steel handrail 30 x 30 x mm, L = 500 mm KWS handrail brackets 4546.. 4679.. 4546.8 with straight saddle and hanger bolt M8, handrail fixing with screw M6 4679.8 with flat saddle and hanger bolt M8, handrail fixing with screw M6 G KWS handrail complete pre-installed 8540.8 Stainless steel handrail 30 x 30 x mm, L = 500 mm H KWS handrail complete pre-installed (number of handrail brackets, 4546.8 or 4679.8 see table Page ) 8545.8 Stainless steel handrail 30 x 30 x mm, L = 500 mm (number of handrail brackets see table Page ) Order example Piece Finish no.... Piece 8540.8 BEK_HS/07.07 9
Enquiry Form Required Information for standard handrails (Special designs on request) Order Enquiry Date Company Telephone Name Fax Street E-Mail Postcode/city Contact person Supply exclusively through specialised trade. Please indicate your specialist dealer if appropriate: Details round handrails: Number of handrails: piece(s) Total length (GL) handrail: mm Type handrail: A B C D E F * G H with fixing material Type timber (C/D/E/F): Maple Beech 3 Ash tree 4 Walnut other timber type (please specify: ) Handrail bracket: (e. g. 4545..) *Mid-point bracket(f): (e. g. 460../464 or 460../46..) (number of handrail brackets see table Page ) Details 30 x 30 mm complete pre-installed handrails: *Please note that for type F and a total length from480 mm an additional mid-point bracket (460../464.. or. 460../46..) is necessary. Number of handrails Pieces Total lenght (GL) handrail (max. 500 mm): mm Other Woelm GmbH I Hasselbecker Str. - 4 I D - 4579 Heiligenhaus I Tel.: + 49 (0) 0 56-8 - 0 I Fax: + 49 (0) 0 56-8 - Woelm Austria GmbH I Seewalchen 5a I A - 50 Seekirchen I Tel.: + 43 (0) 6-5 - 0 I Fax: + 43(0) 6-69 - 95 0 BEK_HS/07.07
Finishes Chart Short symbols for the finishes of aluminium Material aluminium anodisable surface treatment subsequently anodised and compacted ground-brush-finished ground-polished chemically polished short symbol E4 E5 E6 effect on surface damage (marks- slight damage) structure and appearance up to completely removed evenly dull bright up to completely removed smooth and highly brilliant to reflecting partly to mostly set off variation option from dull to matt gleaming Finish Codes raw steel, untreated surface.0 silver stove enamelled.0 black stove enamelled.03 gold stove enamelled.04 electro-galvanised.06 hot galvanised.07 dark bronze stove enamelled.0 special stove enamelled finish.9 Aluminium E4 natural finish, surface untreated.0 ground and brushed. KWS silver anodised. KWS nickel silver anodised.3 KWS 3 gold anodised.4 special anodised colour.6 KWS 4 light bronze anodised.7 KWS 5 dark bronze anodised.8 KWS 6 black anodised.9 Aluminium E5 natural finish, surface untreated.30 KWS silver anodised.3 KWS nickel silver anodised.3 KWS 3 gold anodised.33 brushed stainless steel effect anodised.35 KWS 4 light bronze anodised.36 KWS 5 dark bronze anodised.37 KWS 6 black anodised.38 special anodised colour.39 Brass natural finish.60 brushed and waxed.6 brushed and lacquered.6 nickel plated.63 polished and waxed.65 polished and lacquered.66 Plastic Coated Colours.70 golden yellow RAL 004 flame red RAL 3000 ruby red RAL 3003 wine red RAL 3005 sapphire blue (.) RAL 5003 brilliant blue RAL 5007 azure blue RAL 5009 leaf green RAL 600 moss green RAL 6005 olive drab RAL 60 stone grey RAL 7030 sepia brown RAL 804 mahagoni brown RAL 806 dark brown(.74) RAL 8077 grey white RAL 900 pure white (.7) RAL 900 graphite black (.73) RAL 90 traffic white (.7) RAL 906 other RAL colours on request Plastic coated colours steel glimmer, dark grey DB703 Stainless Steel stainless steel VA nature finish stainless steel VA ground and brushed stainless steel VA ground and polished stainless steel VA finely turned stainless steel V4A nature finished stainless steel V4A ground and brushed stainless steel V4A ground and polished.80.8.83.84.85.87.88 Plastic / Rubber PVC.95 rubber.96 Timber finished by crude brushed.5. varnished.5. Timber species maple. beech. ash-tree.3 walnut.4 Aluminium E6 chemically stained.40 KWS silver anodised.4 KWS nickel silver anodised.4 KWS 3 gold anodised.43 KWS 4 light bronze anodised.46 KWS 5 dark bronze anodised.47 KWS 6 black anodised.48 special anodised colour.49 BEK_HS/07.07
HELM Range TEH_0 Hardware for Sliding Wardrobe Doors TEH_0H Hardware for Sliding Doors (Timber) TEH_0G Hardware for Sliding Doors (Glass) TEH_0D TEH_06 TEH_09 TEH_ TEH_ TEH_40 Design Hardware for Sliding Doors (Timber and Glass) Hardware for Sliding Gates Hardware for Gateway Gates Hardware for Curtains and Tarpaulins Safety Equipment against Falls from a Height (PSE) Hardware for Sliding Shutters KWS Range TEK_00 Door Holders and Door Stops TEK_0308 Pull Handles, Door Handles and Accessories TEK_0506 Flush Handles and Locks TEK_0407 Hardware for Handrails, Floor Rails, Coat Racks and Toilet Partition Walls Code with link to download the brochure BEK_HS The technical specifications are up-to-date. We reserve the right to make modifications with regard to design and styling which serve the purpose of technical improvement. We appreciate your understanding that we assume no liability for any typing errors or any other errors. The reproduction of this document, in extracts or complete, is not permitted without our express written permission. : BEK_HS/07.07 This brochure supersedes all previous brochures.g. Woelm GmbH Hasselbecker Str. - 4 D - 4579 Heiligenhaus Tel.: + 49 (0) 0 56-8 - 0 Fax: + 49 (0) 0 56-8 - www.woelm.de contact@woelm.de Woelm Austria GmbH Seewalchen 5a A - 50 Seekirchen Tel.: + 43 (0) 6-5 0 Fax: + 43 (0) 6-69 95 www.woelm.at contact@woelm.at