Junction boxes Surface mounting - IP44 - - IP56 TECHNICAL CHARACTERISTICS Technical specifications 3 models with cable outlets and snap fixed cover (IP44 according to Standards EN 60529) 7 models with cable outlets and screw fixed cover ( according to Standards EN 60529) 7 models with undrilled walls and screw fixed cover, 4 of which also available with transparent cover (IP56 to EN 60529) solidity and stiffness granted in any point by the materials used and their thickness wide inner space seats, on the box bottom, provided for the fixing of terminal blocks and plates captive, stainless combined Phillips and slotted-head screws cable outlets, with stepped rims to ease cutting screwcaps for complete insulation according to EN 60439-1 (provided with articles in the table on the opposite page) resistance to ageing: 7 days at 70 C resistance to heat: 70 C Conformity to Standards LV Directive EN 60670-22 Standard Complete insulation with the use of screwcaps Captive, stainless steel screws, to ease installation and maintenance Ribs on the box bottom to accomodate terminal blocks and plates. Seat for the terminal for the continuity of the earth circuit High structural stiffness to allow fixing also on uneven walls Knockout to realize drain hole Cable outlets with eased cutting Lateral screw fixing to exploit the inner to the best and ease cabling Ribs to accomodate terminal blocks and plates UV resistant technopolymer, RAL 7035 grey 752
BOXES Surface mounting - IP44 - - IP56 Types of junction boxes for surface mounting The surface junction boxes are available: with cable entries and blind cover either snap fixed or closed with stainless steel screws* with undrilled walls and blind cover fixed with stainless steel screws* with undrilled walls and transparent cover closed with stainless steel screws* with undrilled walls and high, blind cover closed with stainless steel screws with undrilled walls and high, transparent cover closed with stainless steel screws *) The 2 largest models are supplied with a couple of hinges and screws in insulating material, to allow inspections without taking off the cover. Surface mounting junction boxes Temperature during installation Glow Wire Test (GW) snap fixing (IP44) With cable entries with screws () number of cable entries cable max ø (mm) Undrilled walls and blind and transparent cover (IP56) Undrilled walls and blind and transparent high cover (IP56) Inner dimensions (mm) V55001* 4 ø 20 ø 65x35-5 C +60 C 960 C V55002* V55003* V55104* 4 6 6 ø 20 ø 20 ø 25 V55204* ø 80x40 80x80x40 100x100x50 BOXES CONSUMER UNITS V55105* 6 ø 25 V55205* 0x80x50 V55214/V55314 110x110x1 V55106 10 ø 25 V55206/V55306 150x110x70 V55216/V55316 150x110x150 V55217/V55317 150x150x150-15 C +60 C 650 C V55107 10 ø 32 V55207/V55307 190x140x70 V55218/V55318 220x150x150 V55218/V55318 300x220x0 V55108 ø 32 V55208/V55308 240x190x90 V55109 ø 40 V55209/V55309 300x220x0 V55110 ø 40 V55210/V55310 380x300x0 753
MADE IN ITALY V55105 MADE IN ITALY V55107 MADE IN ITALY V55104 Junction boxes Surface mounting - IP44 - - IP56 Dimensions (in mm) ø 72,5 ø 88 40 50 29 39 81 34 44 98 V55001 V55002 109 88 103 130 108 85 45 89 103 50 109 8,5 105 60 88 34 44 V55003 V55104 V55204 45 105 56 60 8,5 45 56 80 5 148 V55105 V55205 197 158 158 54 147 42 118 V55106 131 114 70 85 164 144 101 117 110 70 76 135 154 173 70 78 151 193 214 V55106 V55206 V55306 V55107 V55207 V55307 754
BOXES Surface mounting - IP44 - - IP56 Surface mounting junction box V55001 Surface mounting junction box with cable entries, snap closed cover, RAL 7035 grey. Dimensions ø 65x35 mm V55002 Surface mounting junction box with cable entries, snap closed cover, RAL 7035 grey. Dimensions ø 80x40 mm V55003 Surface mounting junction box with cable entries, snap closed cover, RAL 7035 grey. Dimensions 80x80x40 mm V55104 Surface mounting junction box with cable entries, cover with stainless steel screws, RAL 7035 grey. Dimensions 100x100x50 mm V55204 Surface junction box with undrilled walls, cover closed with stainless steel screws, RAL 7035 grey. Dimensions 100x100x50 mm V55105 Surface mounting junction box with cable entries, cover with stainless steel screws, RAL 7035 grey. Dimensions 0x80x50 mm V55205 Surface junction box with undrilled walls, cover closed with stainless steel screws, RAL 7035 grey. Dimensions 0x80x50 mm V55001 V55002 V55003 V55104 V55204 V55105 V55205 Surface mounting junction box V55106 Surface mounting junction box with cable entries, cover closed with stainless steel screws, RAL 7035 grey. Dimensions 150x110x70 mm V55206 Surface junction box with undrilled walls, cover closed with stainless steel screws, RAL 7035 grey. Dimensions 150x110x70 mm V55306 Surface junction box with undrilled walls, transparent cover closed with stainless steel screws, RAL 7035 grey. Dimensions 150x110x70 mm V55107 Surface mounting junction box with cable entries, cover closed with stainless steel screws, RAL 7035 grey. Dimensions 190x140x70 mm V55207 Surface junction box with undrilled walls, cover closed with stainless steel screws, RAL 7035 grey. Dimensions 190x140x70 mm V55307 Surface junction box with undrilled walls, transparent cover closed with stainless steel screws, RAL 7035 grey. Dimensions 190x140x70 mm V55106 V55206 V55306 BOXES CONSUMER UNITS V55107 V55207 V55307 Baseplate dimensions, page 761 755
V55107 Junction boxes Surface mounting - IP44 - - IP56 Dimensions (in mm) 197 158 54 V55107 V55207 V55307 247 60 215 197 194 151 54 157 164 144 101 147 117 70 78 151 193 214 V55108 V55208 V55308 89 96 200 217 244 265 230 316 310 62 328 306 224 62 62 62 277 396 62 62 62 415 390 330 81 62 81 442 V55109 V55209 V55309 118 7 174 196 226 248 V55110 V55210 V55310 0 9 250 265 309 334 756
BOXES Surface mounting - IP44 - - IP56 Surface mounting junction box V55108 Surface mounting junction box with cable entries, cover closed with stainless steel screws, RAL 7035 grey. Dimensions240x190x90 mm V55208 Surface junction box with undrilled walls, cover closed with stainless steel screws, RAL 7035 grey. Dimensions 240x190x90 mm V55308 Surface junction box with undrilled walls, transparent cover closed with stainless steel screws, RAL 7035 grey. Dimensions 240x190x90 mm V55108 V55208 V55308 Surface mounting junction box V55109 Surface mounting junction box with cable entries, cover closed with stainless steel screws, RAL 7035 grey. Supplied with two hinges. Dimensions 300x220x0 mm V55209 Surface junction box with undrilled walls, cover closed with insulating material screws, RAL 7035 grey. Supplied with two hinges. Dimensions 300x220x0 mm V55309 Surface junction box with undrilled walls, transparent cover closed with stainless steel screws in insulating material, RAL 7035 grey. Supplied with two hinges. Dimensions 300x220x0 mm V55109 V55209 V55309 Surface mounting junction box V55110 Surface mounting junction box with cable entries, cover closed with stainless steel screws, RAL 7035 grey. Supplied with two hinges. Dimensions 380x300x0 mm V55210 Surface junction box with undrilled walls, cover closed with insulating material screws, RAL 7035 grey. Supplied with two hinges. Dimensions 380x300x0 mm V55310 Surface junction box with undrilled walls, transparent cover closed with stainless steel screws in insulating material, RAL 7035 grey. Supplied with two hinges. Dimensions 380x300x0 mm BOXES CONSUMER UNITS V55110 V55210 V55310 Baseplate dimensions, page 761 757
Junction boxes Surface mounting -, high cover Dimensions (in mm) 75 75 110 1 75 115 110 150 V55214 V55314 110 50 62 V55216 V55316 150 60 90 115 115 150 150 115 185 150 150 V55217 V55317 150 60 90 V55218 V55318 220 60 90 185 265 220 150 V55219 V55319 300 60 90 758
BOXES Surface mounting -, high cover Undrilled walls - high cover - V55214 Surface junction box with undrilled walls, high cover fixed with stainless steel screws, RAL 7035 grey. Dimensions 110x110x1 mm V55314 As above, with transparent cover V55216 Surface junction box with undrilled walls, high cover fixed with stainless steel screws, RAL 7035 grey. Dimensions 150x110x150 mm V55316 As above, with transparent cover V55214 V55314 V55216 V55316 Undrilled walls - high cover - V55217 Surface junction box with undrilled walls, high cover fixed with stainless steel screws, RAL 7035 grey. Dimensions 150x150x150 mm V55317 As above, with transparent cover V55218 Surface junction box with undrilled walls, high cover fixed with stainless steel screws, RAL 7035 grey. Dimensions 220x150x150 mm V55318 As above, with transparent cover V55217 V55317 V55218 V55318 Undrilled walls - high cover - V55219 Surface junction box with undrilled walls, high cover fixed with stainless steel screws, RAL 7035 grey. Dimensions 300x220x150 mm V55319 As above, with transparent cover BOXES CONSUMER UNITS V55219 V55319 Baseplate dimensions, page 761 759
Junction boxes Accessories * For total insulation according to Standard EN 60439-1, insert a screwcap V55900 in every fixing hole, into the provided seat Cable entries Cable entry dimensions V55001 V55002 V55003 V55104 V55105 V55106 V55107 V55108 V55109 V55110 C A B C 23 20 4 23 20 4 23 20 6 29 25 6 29 25 6 30 25 10 38 32 10 38 32 38 32 40 45 ø B ø A A B Baseplate dimensions Article A B V55507,9 17,0 V55508 17,0 22,9 V55509 20,7 28,7 V55510 28,7 39,7 V55514 8,8 8,8 V55516 8,8,6 V55517,6,6 V55518,6 18,5 V55519 18,5 25,2 760
BOXES Accessories Accessories V55900 Screwcap ø 14 mm for junction boxes V55001, V55002, V55003, V55104, V55105, V55204, V55205. For total insulation according to EN 60439-1 Standard 13900 Cable entry ø 16-20 mm. Spare part for V55001, V55002, V55003 13900.A As above, ivory V55905 Cable entry ø 25 mm. Spare part for V55104, V55105 V55900 13900 V55905 Baseplate for junction boxes with cable entries and undrilled walls V55507 Metal baseplate for V55107, V55207 and V55307 V55508 Metal baseplate for V55108, V55208 and V55308 V55509 Metal baseplate for V55109, V55209 and V55309 V55510 Metal baseplate for V55110, V55210 and V55310 V55507 V55508 V55509 V55510 Baseplate for junction boxes with cable entries and undrilled walls V55514 Metal baseplate for V55214 and V55314 V55516 Metal baseplate for V55216 and V55316 V55517 Metal baseplate for V55217 and V55317 V55518 Metal baseplate for V55218 and V55318 V55519 Metal baseplate for V55219 and V55319 BOXES CONSUMER UNITS V55514 V55517 V55518 V55519 Available until stocks last 761