Kaba Door Furniture AS1428 Design for Access and Mobility
Kaba Australia has been designing and developing door furniture in Australia for over 30 years. Our extensive range includes a wide selection of items that are suitable for installations needing to comply with the Australian Standard AS1428 Design for Access and Mobility.
Index LEVER HANDLES 240 Series Page 1 270 Series Page 2 280 Series Page 3 740 Series Page 4 PLATE FURNITURE 100 Series, 600 Series Page 5 N100 Series, N600 Series 1500 Series, 2900 Series Page 6 DA Turn Snibs Page 7 TAFE AND WAFE Tafe and Wafe Page 8 PULL HANDLES Pull Handles, Handles on 300 Plate Page 9 PP300 and PH300 Plate 5200 Push Plate and Pull Handles 5250 Push Plate and Pull Handles Page 10 ELECTRONIC DOOR FURNITURE c-lever Page 11 E-Flash Range Page 12
15 37 64 26 43.0 45 16 21 43.4 49 45.0 57 21.7 27 22 24 25.3 29 Lever Handles Kaba Australia has numerous lever handle options that meet the requirements of AS1428, covering both contemporary and classic designs. All Kaba lever sets are sold as a pair. 240 Series PRIVACY INSIDE Shown as 240 rose The 240 Series is a high quality, cost effective range of handles suitable for commercial and domestic applications. Levers are fitted on a 50mm round rose mounting plate projecting 12mm from the door. This series has been designed to suit Kaba mortice locks and latches but is also compatible with similar locks and tubular latches. 240-30 DIMENSIONS 102mm 240-32 DIMENSIONS 118mm 49mm 57mm 43.4mm 45mm 102 118 240-33 DIMENSIONS 240-36 DIMENSIONS 113mm 64mm 43mm 113mm mm 45mm 113 113 Page 1
45.0 57 24 25.3 29 37 43.4 49 43.0 64 16 21.7 27 22 21 Lever Handles 270 Series The 270 Series is a premium quality range of door furniture constructed of a solid brass mounting plate. The range has been designed for commercial applications and is best suited to heavy traffic areas or for external applications. Levers are fitted on a 50mm round rose mounting plate projecting 12mm from the door and have been designed for use with Kaba mortice locks and latches but are also compatible with similar locks and tubular latches. 270-25 DIMENSIONS 270-30 DIMENSIONS 113mm 64mm 43mm 102mm 49mm 43.4mm 113 102 270-32 DIMENSIONS 118mm 57mm 45mm 118 Page 2
25 63 38 23 57.4 44 19 19 Lever Handles 280 Series COMING SOON The 280 Series is a premium quality range of door furniture constructed of a solid brass mounting plate and 316 grade stainless steel dress ring and lever. The range has been designed for commercial applications and is suited for use in coastal or harsh climate conditions. Levers are fitted on a 50mm round rose mounting plate projecting 12mm from the door and have been designed for use with Kaba mortice locks and latches but are also compatible with similar locks and tubular latches. 280-20 DIMENSIONS 280-21 DIMENSIONS 124.5mm 121mm 63mm 57.4mm 44mm 38mm 124.5 121 Page 3
15 37 43.0 64 26 45 16 21 43.4 49 45.0 57 21.7 27 22 25.3 29 24 Lever Handles 740 Series The 740 Series is a high quality, cost effective range of round rose door furniture suitable for commercial and domestic applications. Levers are fitted on a 65mm round rose projecting 12mm from the door. This series has been designed for use with Kaba mortice locks and latches but is also compatible with similar locks and tubular latches. 740-30 DIMENSIONS 740-32 DIMENSIONS 102mm 118mm 49mm 57mm 43.4mm 45mm 65 102 65 118 740-33 DIMENSIONS 740-36 DIMENSIONS 113mm 64mm 43mm 113mm mm 45mm 65 113 65 113 Page 4
Plate Furniture Kaba Australia has plate furniture available to compliment the range of compliant handles specified in the previous section. Our plate furniture has been designed for use with Australian mortice locks and latches and is available in a variety of configurations including, concealed and visible fixing, with cylinder hole and with AS1428 compliant turn snibs. Our 100 and 600 Series are suitable for all levers stated within this brochure. These plates are best suited for commercial applications due to their hard wearing design and features. Available in a square end 600 Series and round end 100 Series to compliment the modern architectural design of Kaba lever handles. The levers are mounted on a 165mm high x 44mm wide solid forged brass base plate projecting 12mm and are designed for use with Kaba mortice locks and latches but also are compatible with similar locks and tubular latches. Our N100 and N600 Series are our narrow stile plate furniture and match with our 25 Series lever only (see 270-25 for lever style) for compliance with AS1428. Constructed from forged solid brass, this series has been designed for use with the Kaba SBM Narrow Back Set Mortice latch and similar products. 100 Series 600 Series N100 Series N600 Series Page 5
Plate Furniture Our 1500 Series of plate furniture matches with the 32 Series and 20 Series levers (see previous section). The 1500 Series plates, along with the levers used for this application are of 316 grade stainless steel. Our 2900 Series, harm minimisation and vandal resistant plate furniture matches with the 32 Series lever only (see 740-32 for lever style). These plates, along with the lever are manufactured using 316 grade stainless steel. The 2900 Series is are also available in a narrow stile, if required. 1500 Series 2900 Series 160mm 160mm SHOWN WITH 20 LEVER 160mm SHOWN WITH 32 LEVER 316SS SHOWN WITH 32 LEVER 160mm Page 6
52.5 45.3 DA Turn Snibs The Kaba Case Fixed Turn Snib has been designed for use of all of our plate furniture, except for the 2900 and N2900 Series. The Kaba Surfaced Fixed DA Turn Snib is available on all our plate furniture, excluding 2900 Series and N2900 Series, as well as our round rose furniture. If a round rose is the selected door furniture, a cylinder escutcheon is required for aesthetic purposes. Please consult your Kaba catalogue to see our full range of escutcheons. FA311 Case Fixed Turn Snib Surface Fixed DA Turn Snib 14.0 12.7 SHOWN ON 600 SERIES PLATE Page 7
Tafe and Wafe Available in both visible and concealed fixing, our Tafe and Wafe range features a 316 grade stainless steel handle on a forged brass plate. The Tafe pulls have been designed to suit our 600 Series plate furniture (outlined previously), while our Wafe pulls suit our 100 Series plate furniture (outlined previously). DIMENSIONS PLATES 180mm length 40mm width 10mm depth HANDLE 150mm length 16mm diameter 45mm finger clearance TAFE TAFE03 concealed left hand TAFE03 visible left hand WAFE WAFE03 concealed left hand WAFE03 visible left hand WAFE04 concealed left hand Page 8
Pull Handles Kaba Australia has a range of stainless steel pull handles that satisfy the requirements of AS1428. Pull handles are available with through fixings, visible fixings, via the use of a 40mm rose, and on plate furniture. Push plates are also available to match with our pull handle range. 19mm Diameter Tubular Pull Handle 203mm PH5111SSS PH5111VSSS 35mm PH5120SSS PH5120VSSS 43mm 16mm Diameter Offset Solid Pull Handle 150mm 115mm PH5000SSS PH5000VSSS 40mm Handles on 300 Plate 65mm 150mm 300mm 150mm PH5115SSS 35mm PH5115VSSS PH150SSS PH220SSS PH230SSS Dimensions Plates : length - 300mm, width - 65mm, depth - 2mm Handle : PH5160 length - 150mm, diameter - 16mm, finger clearance - 43mm Page 9
Pull Handles All plates are available in visible or concealed fix and with oval cylinder hole or round cylinder hole. PP300 and PH300 Plate 100mm 203mm 300mm PH300VSSS Dimensions Plates : length - 300mm, width - 100mm, depth - 2mm Handle : PH5120 length - 203mm, diameter - 19mm, finger clearance - 43mm 43mm 5200 Push Plate and Pull Handle on Plate 203mm 250mm PP5200V PH5200V-25SSL Dimensions Plates : length - 250mm, width - 200mm, depth - 2.5mm Handle : PH5120 length - 203mm, diameter - 19mm, finger clearance - 43mm 43mm 200mm 5250 Push Plate and Pull Handle on Plate 250mm 320mm PP5250V PH5250V-25SSL Dimensions Plates : length - 320mm, width - 160mm, depth - 2.5mm Handle : PH5150 length - 250mm, diameter - 19mm, finger clearance - 43mm 43mm 160mm Page 10
Electronic Door Furniture Along with the mechanical door furniture listed above, Kaba Australia has a range of electronic door furniture that complies with AS1428. Kaba c-lever Our commercial grade c-lever product is lock and cylinder independent, providing any door with a stand-alone access control system which is easy to program and operate. Kaba c-lever can be purchased complete with our MS2 mortice lock and cylinder or it can be retrofitted to an existing Australian mortice lock and cylinder. The cylinder system provides a mechanical key override and can be implemented as a master key system for added security. Page 11
Electronic Door Furniture Kaba E-Flash The Kaba E-Flash is a residential electronic door lock available in proximity card and biometric versions. Both versions come in an Egress model, perfect for use on apartment blocks where compliance to AS1428 is necessary. The Kaba E-Flash comes with a pin code and key override as standard on all models and has a range of accessories to add to the convenience of the system. EF680 EF780 Accessories Prox Card Mifare Card Remote Control Additional Keys Prox Fob Page 12
Kaba Australia Pty Limited Tel: 1300 728 088 Fax: 1300 728 708 info@kaba.com.au www.kaba.com.au Kaba New Zealand Limited Tel: 09 274 3341 Fax: 09 274 3301 info@kaba.co.nz www.kaba.co.nz Copyright Kaba Australia Pty Ltd 01102-1