GO Hyper-link ALL text to corresponding sections MODEL: GOSTR, GOCANDY, GODASH DAB+ Digital Radio with Bluetooth and smartphone charging USER MANUAL
1 Welcome 2 3 Your DAB+ Digital Radio 2.1 In The Box 2.2 Front View 2.3 Rear View 2.4 Top View Quick Setup 3.1 Power On and Autoscan 3.2 Changing DAB+ Stations 3.3 Scanning for DAB+ Stations 3.4 Adjusting the Volume 3.5 Switching Off 4 Features MODE button 4.1 DAB+ Mode 4.2 FM Mode 4.3 Bluetooth Mode 4.4 AUX mode 4.5 Charging Mode VOLUME Dial 4.5 Adjust Volume 4.6 Select DAB+ Station 4.7 Select FM frequency 4.8 FM Station seeking MENU button 4.9 Scan View DLS information(fm) 4.10 Full Scan(DAB+) 4.11 Manual Tune(DAB+) 4.12 Prune Station(DAB+) 4.13 Equaliser 4.14 Set Backlight 4.15 Set Language 4.16 Factory Reset 4.17 Software Version PRESET button 4.18 Storing DAB+/FM Presets 4.19 Selecting a Preset Station 5 6 7 Troubleshooting Technical Specifications Customer Support
1 Welcome Thank you for choosing this Goodmans product. We ve been making electronics for the British people for 70 years. Each of our projects has been carefully designed to be great at what it does and this one is no exception. We hope you enjoy your new GO DAB+ Digital Radio. 2 2.1 Your DAB+ Digital Radio In The Box Carefully remove your DAB+ Digital Radio from the box. Inside the box you will find: DAB+ Digital Radio Mains power supply lead Quick Start Guide Guarantee Booklet Mains Power Your DAB/FM Radio requires a mains supply of 100-240V AV ~ 50/60Hz. Please ensure that your mains supply is compatible before use. Disconnect the Power Cord from the mains when not in use. Position of DAB Digital Radio Place on a flat, stable surface that is not subject to vibrations. Avoid the following locations: Where it is exposed to direct sunlight Where it is close to heat radiating sources Where the humidity is high and ventilation is poor Where it is dusty Adjusting the Aerial Fully extend the aerial to ensure good reception in both DAB and FM Radio modes. It may be necessary to alter the position of the DAB Digital Radio and/or the aerial to achieve the best signal.
2.2 Front View LED Indicator A Red/Green Charging/Fully Charged 2.3 Rear View B Aerial C D E Micro USB Socket Used to connect the radio to the mains power supply. Aux-In Socket Used to connect external audio sources. Reset Button A F USB Socket Used to charge up mobile devices. F E D C B 2.4 Top View G H I J K Power button Press to switch on/off. Presets buttons Press to store presets or recall preset station Mode button Press to switch between DAB+, FM, Bluetooth and AUX mode. MENU button Press to display DLS. Press and hold to display MENU options. VOLUME Dial Press and rotate to select DAB+/FM station. Rotate to adjust volume. G F I J K
3 3.1 3.2 3.3 3.4 3.5 4 4.1 Quick Setup Power on and Autoscan 1. Connect the power cable to the DAB Radio and mains power supply to charge up the radio. 2. Raise and extend the aerial. 3. Press down the POWER button to turn on the radio, it will autoscan automatically for first time usage. Changing DAB+ stations 1. Make sure it is in DAB+ mode. 2. Press the VOLUME dial and then scroll between the station you want to listen to. 3. Press the VOLUME dial again to confirm. Scanning for DAB+ stations 1. Make sure it is in DAB+ mode. 2. Press and hold the MENU button. 3. Rotate the VOLUME dial to FULL SCAN and then press VOLUME dial to perform full scan. Adjusting the volume Rotate the VOLUME dial to adjust the volume. Switching Off Press the POWER button to switch off the radio, the button will restore to originally position. Features MODE button DAB+ mode 1. If the DAB+ radio is in DAB+ mode, press the MODE button repeatedly until FM is shown on the display. 2. Press and hold MENU button, rotate the VOLUME dial to FULL SCAN and then press VOLUME dial to perform full scan. 4.2 FM Mode 1. If the DAB+ radio is in FM mode, press the MODE button repeatedly until DAB+ is shown on the display. 4.3 Bluetooth Mode The DAB+ Digital Radio has Bluetooth capability. To pair the DAB+ Digital Radio with a Bluetooth device: 1. Press the MODE button repeatedly to select Bluetooth mode and Bluetooth logo will be flashing on the display. 2. Activate your Bluetooth device and search for thedigital DAB+ radio. 3. GO will appear on your Bluetooth device. 4. The name of Bluetooth device will appear once it is connected.
5. To turn off the Bluetooth function, switch to other mode or disable Bluetooth on your Bluetooth device. 4.4 AUX mode AUX-IN allows your DAB+ Digital Radio quickly and easily to connect to external audio sources. 1. Press the MODE button repeatedly to select AUX mode and AUX will be flashing on the display. 2. Use a 3.5mm audio cable(not supplied) to connect your external audio device to the AUX socket at the rear of the DAB+ Digital radio. 3. In AUX mode, you may need to operate your external audio device for playback features. 4. For optimum volume levels, you may adjust the volume on the external audio device. 4.5 Charge mode The charge mode allows your radio to charge up mobile phone. 1. Press the MODE button repeatedly to select Charging mode and Charging will be flashing on the display. 2. Use USB cable to connect your mobile phone to the USB socket at the rear of the DAB+ Digital radio. VOLUME Dial 4.6 Adjust Volume Rotate the VOLUME dial to adjust volume levels, there are totally 30 volume levels. 4.7 Select DAB+ Station In DAB+ mode, press the VOLUME dial and rotate to thestation you want to listen to, then press the VOLUME dial to confirm. 4.8 Select FM frequency In FM mode, press the VOLUME dial and rotate to the frequency you want to listen to, then press the VOLUME dial to confirm. 4.9 FM Station seeking In FM mode, press the VOLUME dial and the FM frequency will flash, press again the VOLUME dial to seek for the nearest FM station.(direction will be determined by last VOLUME dial direction.) MENU button 4.10 View DLS information In DAB+ mode, press MENU button to view DLS information. 4.11 Full Scan(DAB+) In DAB+ mode, press and hold MENU button, rotate the VOLUME dial to FULL SCAN and then press VOLUME dial to perform full scan. You may select the station you want to listen to from the scanned station list. 4.12 Manual Tune(DAB+) 1. In DAB+ mode, press and hold MENU button, rotate the VOLUME dial to Manual Tune and then press VOLUME dial to enter Manual Tune. 2. Rotate the VOLUME dial to the frequency you want to listen to and then press VOLUME dial to confirm. The radio will search the stations at this specific frequency. 3. When the searching is finished, you can select the stations at the frequency.
4.13 Prune Station(DAB+) 1. In DAB+ mode, press and hold MENU button, rotate the VOLUME dial to Prune and then press VOLUME dial to confirm. 2. Rotate the VOLUME dial to the station you want to prune and then press VOLUME dial to confirm. 4.14 Equaliser 1. Press and hold MENU button, rotate to SYSTEM and press VOLUME dial to confirm. 2. Rotate and press VOLUME dial to switch ON/OFF TREBLE BASS according to your needs. 4.15 Set Backlight Set TIMEOUT: 1. Press and hold MENU button, rotate to SYSTEM and press VOLUME dial to confirm. 2. Rotate and press VOLUME dial to select TIMEOUT. 3. Select TIMEOUT interval(on 10 20 30 45 60 90 120 180) by rotating and pressing VOLUME dial. Set DIM LEVEL: 1. Press and hold MENU button, rotate to SYSTEM and press VOLUME dial to confirm. 2. Rotate and press VOLUME dial to select DIM LEVEL. 3. Select DIM LEVEL(HIGH MEDIUM LOW) by rotating and pressing VOLUME dial. 4.16 Set Language 1. Press and hold MENU button, rotate to SYSTEM and press VOLUME dial to confirm. 2. Rotate and press VOLUME dial to select Language. 4.17 Factory Reset 1. Press and hold MENU button, rotate to SYSTEM and press VOLUME dial to confirm. 2. Rotate and press VOLUME dial to select Factory Reset. 3. Select Yes for Factory Reset. 4.18 Software Version 1. Press and hold MENU button, rotate to SYSTEM and press VOLUME dial to confirm. 2. Rotate and press VOLUME dial to view Software Version. PRESET button 4.19 Storing DAB+/FM Presets When you are listening to the DAB+/FM station you want to store, press and hold 1/2/3/4 button for 2 seconds to store the stations. 4.20 Selecting a Preset Station In DAB+/FM mode, press 1/2/3/4 button to recall the stored stations.
5 Troubleshooting Problem There is no sound from my radio The display shows NO SERVICES in DAB+ mode Poor reception Some of the buttons on the DAB+ Digital Radio are not working I cannot find GO on the Bluetooth device What to do Check that the volume is not set to the minimum. Make sure that the radio has been able to locate DAB/FM stations. Make sure that DAB+ coverage exists in your area. Try adjusting the position of the aerial or location of the radio. Hyper-link ALL text to corresponding sections As with any radio service, there will be areas of weak signal that may cause poor reception. Follow the instructions for Manual Tuning on 4.11 and adjust the aerial while monitoring the signal strength until the optimum signal is obtained. If reception is still poor, try re-locating the radio to another part of the room. This may be caused by electrostatic discharge. Turn the DAB+ Digital Radio off, disconnect the mains plug and reconnect after a few seconds. Make sure that the Bluetooth function is activated on your Bluetooth device. Re-pair the DAB+ Digital Radio with your Bluetooth device. 6 Model Number Power Supply Speaker Output Power Frequency Range LCD Display Battery Capacity Dimensions GO 100-240V AC ~ 50/60Hz Adapter: DC 5V, 2.5A 1.8W x2 (AC Power), 1.0W x2 (Battery Power) FM: 87.5-108MHz DAB+: 174-240MHz B&W Dot Matrix LCD 4400mAh 200mm (W) x 95mm (D) x 60mm (H) 7 Customer Support Our customer service team is available for technical or guarantee support. Visit www.goodmans.co.uk/support www.goodmans.co.uk