Utensil sets a 15" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides 11-5/8" 6-1/8" 4-1/4" 18" Drawer length ZHI.457FI1A 21" Drawer length ZHI.533FI1A 21" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides 17-5/8" 4-13/16" 11-9/16" 18" Drawer length ZHI.457FI3A 21" Drawer length ZHI.533FI3A 21" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides 17-5/8" 4-1/2" 11-7/8" NOTE: Compensation tray not included with ZHI.457GI3A 18" Drawer length 21" Drawer length ZHI.457GI3A ZHI.533MI3A Dimensions in millimeters (inch equivalents as noted) 41
Cutlery sets 15" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides 11-5/8" 6-1/8" 4-1/4" 21" Drawer length ZHI.533BI1A 21" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides 17-5/8" 5-3/16" 11-3/16" 21" Drawer length ZHI.533BI3A 24" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides 20-5/8" 4-3/8" 15" 21" Drawer length ZHI.533KI4A Subject to technical modifications without notice. 2008 42
Special applications a Exact fit for 21" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides Adjusts from 15-3/4" to 16-1/2" wide to completely fill a drawer in a 21" wide cabinet. Adjustable section 17-5/8" 16-3/8 15-3/4" to 16-1/2" 21" Drawer length ZHI.533TI4A Exact fit for 24" wide cabinets with 1-1/2" frames and 5/8" thick drawer sides Adjusts from 18-3/4" to 19-1/2" wide to completely fill a drawer in a 24" wide cabinet. A dju s t able se c tio n 20-5/8" 19-3/8 18-3/4" to 19-1/2" 21" Drawer length ZHI.533TI5A Applications for wide drawers For wide drawers use combinations of ORGA-LINE sets to maximize storage space and organization. Examples: 21" Drawer length ZHI.533MI3A + ZHI.533KI4A 21" Drawer length ZHI.533FI3A + ZHI.533MI3A Dimensions in millimeters (inch equivalents as noted) 43
ORGA-LINE cutlery trays a Application Description Use High quality stainless steel utensil dividers combined with wear resistant nylon parts in gray (R737) o Removable, dishwasher safe to 170 F NOTE: For assembly instructions see page 56 Specifications Tray dimensions Tray dimensions Tray dimensions 88 (3-1/2 ) 88 (3-1/2 ) 64 (2-9/16 ) 176 (7 ) 88 (3-1/2 ) 264 (10-3/8 ) 88 (3-1/2 ) ZSI.010SI ZSI.020SI ZSI.030SI Set height Tray height 88 (3-1/2 ) 60 (2-3/8 ) Subject to technical modifications without notice. 2008 44
ORGA-LINE dividers a Application Description Use Trays and dividers available separately Wear resistant nylon parts in gray (R737) Spring-loaded ends NOTE: For assembly instructions see page 56 Specifications Single cross divider Double cross divider 88 (3-1/2 ) 176 (7 ) ZSI.010Q ZSI.020Q Example Single cross divider Double cross divider Dimensions in millimeters (inch equivalents as noted) 45
ORGA-LINE for deep drawers Application Description Deep drawer organization for TANDEM 21" wood drawers Cut to size cross dividers to fit drawers with an interior width of up to 1139 (44-5/8") Spring-loaded interior side rails Clip-on lateral dividers For drawer thicknesses of 16 (5/8") or 19 (3/4") Minimum inside drawer height 135 (5-1/4") Available in gray (R906) Use NOTE: For assembly instructions see page 56 Min. inside drawer height 135 (5-1/4") Cross divider Spring connector 114.5 (4-1/2") 1077 (42-1/4") 1077 (42-1/4"), cut to size aluminum core W = inside drawer width minus 62 (2-7/16") Max. inside drawer width = 1139 (44-5/8") NOTE: Metal cutting blade recommended for cutting cross dividers Gray (R906) Z40H1077A Dust gray (R737) Z40H000A Interior side rail Lateral divider 101.5 (4") For 21" drawer 114.5 (4-1/2") Gray (R906) ZHI.533SS65 Gray (R906) Z43H100S.01 Using TANDEM page 14 Drawer preparation page 15 Accessories page 52 Assembly aids page 54 Subject to technical modifications without notice. 2008 46
a Food A 2 Cross dividers B 4 Spring connectors C 2 Interior side rails C B A D 6 Lateral dividers D Containers A 2 Cross dividers B 4 Spring connectors C 2 Interior side rails C B A D 6 Lateral dividers D Pots/Pans A 2 Cross dividers B 4 Spring connectors C B A C 2 Interior side rails D 6 Lateral dividers D Plates 2 plate holders included For storing plates in deep drawers Overall height 171 (6-3/4") Adjusts to hold plates from 180 (7-1/16") to 320 (12-5/8") Non-slip bottom High quality plastic and stainless steel Dust gray (R737) ZTH.0350 Dimensions in millimeters (inch equivalents as noted) 47
Locking devices Standard For use with standard applications Force-guided right device and self-adjusting tolerance on the left side Self-adjusting drawer length tolerance Zinc die cast with synthetic, spring loaded release levers Tool-free drawer height adjustment +3 (1/8") Right locking device Left locking device Installation screw T51.1700.04 R T51.1700.04 L 612TH Vertical mount Vertical mount locking device used to minimize sub-front splitting Force-guided right device and self-adjusting tolerance on the left side Zinc die cast with synthetic, spring loaded release levers Tool-free drawer height adjustment +3 (1/8") Right locking device Left locking device Installation screw T51.1700.20 R T51.1700.20 L 606N or 606P Depth adjustable (inset) For use with inset drawers Adjustable stop with 4 (5/32") depth range for consistantly accurate stops and perfectly aligned drawer fronts Force-guided right device and self-adjusting tolerance on the left side Self-adjusting drawer length tolerance Zinc die cast with synthetic, spring loaded release levers Tool-free drawer height adjustment +3 (1/8") Right locking device Left locking device Installation screw T51.1700.PV R T51.1700.PV L 612TH Subject to technical modifications without notice. 2008 48
Positive stop For use when a precise stopping position is required. (example: roll-out tray application) Force-guided right device and self-adjusting tolerance on the left side Zinc die cast with synthetic, spring loaded release levers Tool-free drawer height adjustment +3 (1/8") Right locking device Left locking device Installation screw T51.1700.PO R T51.1700.PO L 612TH Narrow drawer For use with narrow drawers - Min. interior drawer width 90 (3-9/16"), min. sub front thickness 16 (5/8"), max load capacity 25 lb Force guided right device and ±1/16" self-adjusting tolerance on the left side Self-adjusting drawer length tolerance Vertical mount, two-piece plastic design for 1/2" recess Tool-free drawer height adjustment +3 (1/8") Right locking device Left locking device Installation screw T51.0700.20 R T51.0700.20 L 606N or 606P Dimensions in millimeters (inch equivalents as noted) 49
Rear attachment options Screw-on bracket For TANDEM 552 and 562 series Non-handed, one-piece stamped steel design, zinc coated Use at least three #6 truss head screws Not for use with 562H/F2290B10 16 32 (5/8") (1-1/4") 2 (3/32") 21 (13/16") 14.4 (9/16") Face Frame Stile Face Frame Rail NOTE: The drawing at right is for 562 series Installation screw 295.3750.01 612TH Screw-on bracket with locating tabs For TANDEM 562 series only Lateral self alignment feature 3 (1/8") Handed, one-piece stamped steel design, zinc coated Use at least two #6 truss head screws Not for use with 562H/F2290B10 32 (1-1/4") 3.2 (1/8") Ø8 32 (1-1/4") Face Frame Stile Face Frame Rail Right bracket Left bracket Installation screw 295.3770.01 L 295.3770.01 R 612TH Plug-in socket For TANDEM 552 and 562 series Lateral self alignment feature Non-handed, two-piece design Non-detachable 8 (5/16") dowels, 9.5 (3/8") long Synthetic, natural color 6 (1/4") min. back panel thickness Not for use with 562H/F2290B10 Use 295.3770.01 for inset applications 32 (1-1/4") 3.2 (1/8") Ø8 32 (1-1/4") Face Frame Stile Face Frame Rail 295.6410 Subject to technical modifications without notice. 2008 50
Screw-on socket For TANDEM 552 and 562 series Lateral self alignment feature 7 (9/32") Non-handed, two-piece design 37 (1-7/16") Synthetic, natural color Use two #7 flat head wood screws Not for use with 562H/F229B10 40 (1-9/16") 7 (9/32") 13 (1/2") 6.5 (1/4") Face Frame Stile Face Frame Rail 295.6400 Screw-on socket for TANDEM plus 9" For use when installing TANDEM plus 9" runners in face frame cabinets 39.5 (1-9/16") 16 (5/8") For interior cabinet depth 266 (10-15/32") - 282 (11-3/32") Two required per drawer Side-to-side self-alignment 32 17.5 (1-1/4") (11/16") 4 (3/16") Face Frame Stile Face Frame Rail 295.3700.21 Installation screw 612TH Screw-on socket for TANDEM plus 9" For use when installing TANDEM plus 9" runners in face frame cabinets 39.5 (1-9/16") 16 (5/8") For interior cabinet depth 283 (11-5/32") - 299 (11-25/32") Two required per drawer Side-to-side self-alignment 32 17.5 (1-1/4") (11/16") 4 (3/16") Face Frame Stile Face Frame Rail Installation screw 295.3700.22 612TH Dimensions in millimeters (inch equivalents as noted) 51
68 (2-11/16 ) 62 (2-7/16 ) 30 (1-3/16 ) Accessories Deep thread system screw Pilot bore Ø5 (3/16 ) hole Deep thread wood screw Truss head wood screw Pilot bore Ø2.5 (3/32 ) hole #7 x 13 mm, #2 POZI 661.1300HG #7 x 14.5 mm, #2 POZI 661.1450HG #6 x 5/8, #2 Phillips 606N #6 x 5/8, #2 POZI 606P #7 x 5/8", #2 Phillips 707N #7 x 3/4", #2 Phillips 7074P #6 x 1/2, #2 Phillips 612TH Bumpers POZI DRIVER and bits Cushions door closing Clear with a self-adhesive back POZI Tick marks Phillips A POZI screwdriver (different from Phillips) is the most crucial tool you can use to assure that full torque is applied to all Blum mounting screws. POZI screws can be identified by the distinctive tick marks located in the center of the screw head recess. #2 POZI DRIVER POZI DRIVER 1/4" bit holder BIT HOLDER 6(1/4 ) dia. x 1.5(1/16 ) FX4041 #2 x 1" POZI bit insert POZI BIT #2x1 10(3/8 ) dia. x 3(1/8 ) SJ5312 #2 x 2" POZI bit insert POZI BIT #2x2 Universal bracket kit Dimensions Zinc coated steel bracket Includes (4) brackets Includes (8) M4 screws 64 (2-9/16 ) 48 (1-7/8 ) 16 (5/8 ) M4 tapped holes M4 19.5 (3/4") 30 (1-3/16") 34 (1-5/16 ) 1.5 (1/16 ) 50(1-15/16") 18(11/16") 68 (2-11/16 ) 7 (1/4 ) 5 (3/16 ) 16 (5/8 ) 32 (1-1/4 ) Universal bracket kit #6 x 1/2", truss head 295.4000 612TH 48 (1-7/8 ) Subject to technical modifications without notice. 2008 52
a TANDEM end cap Application TANDEM runner Panel To cover the front edge of TANDEM cabinet profiles when used in an interior roll-out application Can be used with all 562H, 568H and 568. series runners Front view T59.3570 295.5520 Spacer End cap Right end cap 295.5520 Left end cap 295.5521 Side spacer Application 6 (1/4") 36 (1-7/16") 9 18 9 (3/8") (11/16") (3/8") 25 (1") 6 (1/4") 661.1300HG 32 (1-1/4") For spacing out TANDEM runners from the cabinet side for clearance on interior roll-outs. Spacer T59.3570 POZI installation screw 661.1300HG 76 (3") 32 (1-1/4") 32 (1-1/4") 12 (1/2") 12 (1/2") 6 (1/4") NOTE: Use (2) pcs. per runner up to 15 lengths and (3) pcs. per runner 18 or longer 32 (1-1/4") 32 (1-1/4") 32 (1-1/4") Drawer front adjuster Using the drawer front adjuster 10.5 (7/16 ) Ø20 (13/16 ) 1 2 Nylon housing with pre-mounted 8-32 steel nut. For 4-sided drawers. Adjusts height and side-to-side by 5 (3/16"). NOTE: See next page for marking guage POZI installation screw 661.1300HG Insert drawer front adjusters manally or with a MINIPRESS insertion ram (MZM.0095). Install and adjust drawer front. Dimensions in millimeters (inch equivalents as noted) 53
Assembly aids Drawer front adjuster marking gauge Using the marking gauge 1 2 For marking center holes for press-in drawer front adjusters. For wooden 4-sided drawers. Pre-bore for front adjusters. Insert marking gauges into drawer front. Align the drawer front to make marks in the drawer box. 10 (3/8 ) Ø20 (13/16 ) 3 4 Marking gauge 65.2950.10 Mark fixing positions with a light tap onto the drawer front. Bore Ø5 (3/16") holes through the drawer box. TANDEM template Using the TANDEM template 1 2 Essential tool for drawers using TANDEM runners To bore the Ø6 mm holes for rear hooks Pre-bore Ø2 mm hole for TANDEM locking devices at 12 angle Bore rear fixing holes Ø6 mm bit Ø2 mm bit with extension Pre-bore holes for locking device screws TANDEM template T65.1000.02 Accessories (order separately) Ø2 mm drill bit DB-2mm Ø6 mm drill bit DB-6mm A B C D Tool set A Ø2 mm drill bit extension B Ø6 mm stop collar C #2 Phillips screwdriver tip D Allen key Tool set T65.9000 Subject to technical modifications without notice. 2008 54
Cabinet profile template Using the cabinet profile template 1 2 Determine runner locations and set templates on the bar by using the integrated scale. Clamp assembly to the cabinet side. 3 4 For determining cabinet profile positions using the integrated ruler Template can be used with assembled or unassembled cabinets Ensures precise and level location of cabinet profiles Suitable for all Blum drawer runners Cabinet profile template parts Metric calibrated bar, 1 meter long Adjustable templates (4 pcs.) Clamping lever Extension for Ø2 mm drill bit Pre-bore Ø2 mm holes through templates for front and middle mounting positions. Fasten runners to cabinet sides with required screws into pre-bored holes. Add extra screws as required for strength. Cabinet profile template T65.5000.01 Accessories (order separately) Ø2 mm drill bit DB-2mm Dimensions in millimeters (inch equivalents as noted) 55
Assembly, removal and adjustment Height adjustment Tilt adjustment 2 1 1 Press up on adjustment latch. 2 Push toward back of drawer. Maximum 3 (1/8") rise of drawer. Drawer preparation 612TH Installation screw Drawer box insertion Drawer box removal 2 1 Place drawer on runners and close; locking devices will automatically engage runners. 1. Squeeze orange handles on locking devices. 2. Pull drawer out and up. ORGA-LINE tray set assembly ORGA-LINE deep drawer assembly 4 4 2 1 3 2 1 Subject to technical modifications without notice. 2008 56
Part number index i Part No. Page No. 295.1000 53 295.3750.01 16-23, 28, 56 295.3770.01 50 295.4000 33, 52 295.5520 53 295.5521 53 295.6400 51 295.6410 51 552F3050N 18-19 552F3810N 18-19 552F4570N 18-19 552F5330N 18-19 552H3050N 16-17 552H3810N 16-17 552H4570N 16-17 552H5330N 16-17 562F2290B10 21-23 562F3050B 21-23 562F3050C 21-23 562F3810B 21-23 562F3810C 21-23 562F4570B 21-23 562F4570C 21-23 562F5330B 21-23 562F5330C 21-23 562H2290B10 20-21 562H3050B 20-21 562H3050C 20-21 562H3810B 20-21 562H3810C 20-21 562H4570B 20-21 562H4570C 20-21 562H5330B 20-21 562H5330C 20-21 568.6100B 24-25 568.6860B 24-25, 33, 34 568.7620B 24-25 568A6100B 26-27 568A6860B 26-27, 33-34 568A7620B 26-27 568F4570B 26-27 568F5330B 26-27 568H4570B 24-25 568H5330B 24-25 606N 52 606P 52 612TH 52 65.2950.10 54 661.1300HG 53 661.1450HG 52 707N 52 7074N 52 BIT HOLDER 52 DB-2mm 55 DB-6mm 54 FX4041 52 M4 52 POZI BIT #2x1 52 POZI BIT #2x2 52 POZI DRIVER 52 SJ5312 52 T51.0700.20 49 T51.1700.04 16-34, 48-49 T51.1700.20 48 T51.1700.PO 49 T51.1700.PV 48 T51.7000 32 T55.7150 36 T59.3570 53 T65.1000.02 54 T65.5000.01 55 T65.9000 54 Z40H000A 46 Z40H1077A 46 Z43H100S.01 46 ZFZ.380G0I 38 ZHI.457FI1A 41 ZHI.457GI3A 41 ZHI.533BI1A 42 ZHI.533BI3A 42 ZHI.533FI3A 41, 43 ZHI.533FI1A 41 ZHI.533KI4A 42, 43 ZHI.533MI3A 41, 43 ZHI.533SS65 46 ZHI.533TI4A 43 ZHI.533TI5A 43 ZTH.0350 47 ZSI.010Q 45 ZSI.010SI 44 ZSI.020Q 45 ZSI.020SI 44 ZSI.030SI 44 ZSZ.02M0 39 Dimensions in millimeters (inch equivalents as noted) 57
Perfecting motion 58
Our understanding of perfecting motion Blum, Inc. is a leading manufacturer of functional hardware for the kitchen cabinet and commercial casegoods industries specializing in concealed hinges, drawer runner systems and lift systems. Virtually all of the hardware needed to assemble and make cabinets functional is available within the wide range of quality Blum products. Blum s manufacturing and distribution facility in Stanley, North Carolina supplies the North American markets through a network of more than 150 dependable distributors. Wholly owned by the Blum family, the company was formed in 1952 by Julius Blum and is headquartered in Hoechst, Austria. Global customer benefits Product development at Blum considers all of the various customers who will come in contact with our products. With this Global Customer Benefits philosophy we strive to create advantages for all users from the manufacturer to the end consumer. Blum, Inc. is ISO 9001 certified which means that you are assured of consistent quality in every Blum product. What s more they exceed the requirements of ANSI/BHMA standards for cycle life, static load and self-closing performance. Contact your local Blum representative for more details. 59
Blum, Inc. 7733 Old Plank Rd. Stanley, NC 28164 800-438-6788 704-827-1345 fax 704-827-0799 www.blum.com Please visit www.blum.com for information on other Blum products. Technical specifications subject to change without notice. LIT.4026.05.08 2008 Printed in USA