HX-80N PIRs stndrd model HX-80NAM HX-80N with nti-mskin Lon distnce detection re (4.0 m) Flexible detection re settin with pltes nd flps Unique pyro element Intellient AND loic Hih Mount Outdoor Detector Dul sinl processin loic Veettion swy nlysis loic Diitl nti-mskin (AM model) HX-80N/80NAM NO.59-1619-0 INSTALLATION INSTRUCTIONS N19 CONTENTS 1 INSTALLATION PRECAUTIONS... 1-1 BEFORE INSTALLATION... 1- PARTS IDENTIFICATION...3 1-3 KNOCKOUTS...3 DETECTION AREA...4-1 OUTLINE OF DETECTION AREA...4 - HOW TO REDUCE THE LONG RANGE DETECTION AREA...6-3 HOW TO DEACTIVATE THE SHORT RANGE DETECTION AREA...8 3 INSTALLATION...10 3-1 INSTALLING WITH BRACKET...10 3- ADJUSTING THE VERTICAL ANGLE...1 3-3 INSTALLING WITHOUT BRACKET...1 3-4 WIRING...13 3-5 WALL TAMPER (OPTION)...14 4 WALK TEST...16 5 SETTING...16 6 LED INDICATION...18 7 SPECIFICATIONS...19 7-1 SPECIFICATIONS...19 7- DIMENSIONS...0-1 -
1 INSTALLATION PRECAUTIONS 1-1 BEFORE INSTALLATION Wrnin Cution The check The nix Filure to follow the instructions provided with this indiction nd improper hndlin my cuse deth or serious injury. Filure to follow the instructions provided with this indiction nd improper hndlin my cuse injury nd/or property dme. mrk indictes recommendtion. sin indictes prohibition. Wrnin Wrnin Cution Do not repir or modify product Keep product wy from wter Mount the unit securely Mountin heiht Keep the detector prllel to the round..5 m 3.0 m (8'" 9'10") Prllel Tilt Consider the direction person is pprochin from, s well s the detection re. Instll the detector in plce where it is free from flse lrm fctors. For exmple: Sunliht nd reflection Het source Objects movin in the wind - -
1- PARTS IDENTIFICATION Brcket bse Bse Terminls Min unit PIR1 (Do not touch) Cover Brcket Shft cover Lock Screw* (M4 35 mm) Anti-mskin infrred LED (HX-80NAM only) PIR (Do not touch) Screw (4 0 mm) Screw kit For joint Screw (4 0 mm) For wll mountin Screw (4 0 mm) LED indictor Lens *Lock screw ttched on brcket bse Lock screw 1-3 KNOCKOUTS Min unit Brcket Wirin Hole Wirin knockout (Off-the-shelf) Universl mnet switch instll position Wirin spone pd Wirin Hole For brcket Up-Down lock screw For wll fstenin/brcket fstenin (instlltion pitch 83.5 mm (3.9")) - 3 - Do not touch For wll For switch Up-Down fstenin box fstenin lock screw Adjustment screw For min unit fstenin
i j DETECTION AREA -1 OUTLINE OF DETECTION AREA Plte 1 Upper flp Plte C b d h Lower flp Flp fix position indictor Plte fix position indictor - 4 -
DETECTION AREA (fctory defult) Side View 3.0 m (9'10").5 m (8'") Top View (ft.) 8 10 6 4 8 (ft.) 6 4 (ft.) 3 0 3 (m) 3.0.0 1.0 (m).5 1.5 0.5 (m) 1.0 0 1.0 10 0 30 40 50 60 70 80 (ft.) 4 8 1 16 0 4 (m) j i h d f e c Cution>> Adjust 1 click (1.5 upwrd) for 3.0 m (9'10") heiht instlltion. (Refer to 3-) b 10 0 30 40 50 60 70 80 (ft.) 4 8 1 16 0 4 (m) j i h f e d c Cution>> Adjust clicks (.5 upwrd) for.5 m (8'") heiht instlltion. (Refer to 3-) b 10 0 30 40 50 60 70 80 (ft.) 4 8 1 16 0 4 (m) - 5 -
i j - HOW TO REDUCE THE LONG RANGE DETECTION AREA To djust the LONG rne of detection, set the upper nd lower flps s follows: Upper flp C Flp fix position indictor b d h Lower flp 1 Pull out the flp. Note>> If the lower flp is locted t the fctory defult position, slide it out with your thumb. C i Move the flp to the position tht corresponds with the desired detection distnce. 3 Push the flp until it clicks into position. C C i i - 6 -
PIR lon rne detection re reduction The detection distnce in the followin tble cn be limited by combinin the positions of the flp. Use the followin tble to determine the positions of the upper nd lower flps tht set the required mx. detection distnce. NOTES: 1. The distnce my vry due to environmentl conditions.. Alwys wlk test the detector to confirm the detection distnce. Fctory defult c Fctory defult b d Lower Upper Fctory defult 4.0 m (80') NOTE: Use only the followin combintions for the flp settins. c Fctory defult b 1 18.0 m 13.0 m (60') (4'8") N.A. N.A. 10.0 m (3'10") d N.A. N.A. 3 4 6.5 m (') 1 18m(60') 5m 10m 15m MASK 3.0m(9'10") Upper position:, Lower position: Fctory defult 5m 13m(4'8") 10m MASK 3.0m(9'10") Upper position:, Lower position: b 3 10m(3'10") 5m MASK 3.0m(9'10") Upper position: c, Lower position: b 4 6.5m(') 5m MASK 3.0m(9'10") Upper position: c, Lower position: d - 7 -
i i j i -3 HOW TO DEACTIVATE THE SHORT RANGE DETECTION AREA To djust the SHORT rne of detection, set the upper nd lower pltes s follows: Plte Plte 1 C b d Plte fix position indictor * Plte 1 nd re identicl. h 1 Remove the plte. Insert the plte into the position determined by the required mskin distnce until it clicks. C C 3 If ny plte is not used, plce it in the store position. C i Note>> Be creful not to lose the pltes. - 8 -
PIR short rne detection re dectivtion Use the followin tble to determine the positions of the pltes tht set the required msked re. Lower Not used Upper j h i Not used i Fctory defult N.A. 1 N.A. 3 h j N.A. N.A. 4 NOTE: Use only the followin combintions for the plte settins. 1 4m(80') 5m 10m 0m 3.0m(9'10") MASK Upper position: Fctory defult, Lower position: j 4m(80') 5m 10m 0m 3.0m(9'10") MASK Upper position: i, Lower position: j 3 4m(80') 5m 10m 0m 3.0m(9'10") MASK Upper position: i, Lower position: h 4 4m(80') 5m 10m 0m 3.0m(9'10") MASK Upper position:, Lower position: h - 9 -
3 INSTALLATION Use the brcket for norml instlltion. The unit my be instlled directly on the wll, without the brcket, only if the followin three conditions re met; The mountin heiht is less thn 3m (9'10"). Horizontl djustment is not necessry. The round must be level. 3-1 INSTALLING WITH BRACKET Usin the brcket mkes it possible to djust the unit horizontlly by ±90. In cses where the round is uneven nd/or not prllel with the bse of the unit, it is possible to djust the unit verticlly by ±0. Cution>> Do not chne the detection lenth with brcket. Use the flps nd pltes to djust the detection lenth. 90 90 0 0 1 Remove the Up-Down lock screw. Push the shft cover clip strihtly to remove the shft cover. Shft cover clip Shft cover Push with suitble tool. e.. smll screwdriver 3 Loosen the djustment screw two turns. 4 Tilt the brcket bout 45 nd pss throuh the wire. Adjustment screw Cution>> Do not loosen the screw too much. It my disssemble. In Out - 10 -
5 Determine the horizontl direction (left or riht) of the detector before instllin the brcket on the wll. To the riht To the left 6 Open the wirin knockout. Wirin knockout 7 Open the Up-Down lock screw knockout for connectin the brcket. 8 Tihten screws 1 nd, djust the brcket nle (refer to 3-), then tihten screw 3. Perform n re check. If re-djustment is required, loosen screw 3 nd chne the brcket nle. After the djustment is complete, tihten screw 3 in. Knockout with 4 0 tppin screw (screwkit) Wirin hole Wirin spone pd 14 0 screw Out 34 35 Up-Down lock screw 4 0 screw 9 Tihten the djustment screw clockwise. 10 Wire to the terminl nd instll the min unit nd lens on the bse. Adjustment screw 11 Instll shft cover into plce. - 11 -
3- ADJUSTING THE VERTICAL ANGLE For best performnce, instll detector prllel to the round. Decide the detection lenth. To chne the detection lenth, djust the flp nd plte positions. Refer to the -, -3 for the detils. Perform wlk test to ensure detector is prllel to the round. 3.0 m (9'10") 4.0 m (80') * This description ssumes the detection lenth to be 0 m (0') to 4.0 m (80'). If the detection lenth is shorter thn tht which ws setup (refer to pe 7), chne the detector nle upwrds. If the detection lenth is loner thn tht which ws setup (refer to pe 7), chne the detector nle downwrds. If the detection lenth is equl to tht which ws setup (refer to pe 7), the djustment is complete. Cution>> If the bse of the unit is lredy prllel to the round, do not chne the detection lenth by tiltin the min unit up or down. Refer to 3-1 for the detils. Exmple (the round is level) 0 is the oriine. Adjust clicks (.5 upwrd) for.5 m (8'") heiht instlltion. Adjust 1 click (1.5 upwrd) for 3.0 m (9'10") heiht instlltion. 3-3 INSTALLING WITHOUT BRACKET 1 Open the wirin knockout with suitble tool e.. screwdriver. Pull the wire throuh the bse knockout. Adjustment screw In Out Wirin spone pd - 1 -
3 Fsten the bse to the wll. 4 Instll min unit fter wirin to the terminl. 3-4 WIRING Power wires should not exceed the followin lenths. WIRE GAUGE HX-80N HX-80NAM 1 V 14 V 1 V 14 V AWG (0.33 mm ) 160 m 360 m 140 m 310 m (50') (1,180') (460') (1,00') AWG0 (0.5 mm ) 60 m 560 m 30 m 490 m (850') (1,840') (750') (1,610') AWG18 (0.83 mm ) 410 m 900 m 360 m 780 m (1,350') (,950') (1,180') (,560') HX-80NAM TAMPER OUTPUT (N.C.) *1 AUX INPUT (N.C.) TROUBLE OUTPUT (N.C.) SPARE (Non short) ALARM OUTPUT (N.O.) ALARM OUTPUT (COM) ALARM OUTPUT (N.C.) POWER INPUT (-) (9.5-18VDC) POWER INPUT (+) (9.5-18VDC) HX-80N TAMPER (N.C.) AUX INPUT (N.C.) TROUBLE N.O. COM N.C. + SP SP OUTPUT ALARM POWER T.O.(N.C.) 9.5-18VDC TAMPER AUX N.O. COM N.C. + SP SP INPUT ALARM POWER (N.C.) (N.C.) 9.5-18VDC *1: TAMPER terminls to be connected to 4 hour supervisory loop. - 13 -
3-5 WALL TAMPER (OPTION) Universl mnet switch my be mounted s wll tmper. Instlltion spce for mnet switch is provided on the bck of the min unit nd the brcket. Mximum size of n pplicble mnet switch: D 9 mm (0.35") W 40 mm (1.57") H 9 mm (0.35") Mnet switch is not included. Min unit Brcket Wirin Hole Mnet switch (Brcket side) instlltion position Wirin spone pd Mnet switch (Wll side) instlltion position Mnet switch (Wll side) instlltion position Mnet switch (Bse side) instlltion position -Instlltion 1 Instll the mnet switch (wll side) to the wll. To determine the instlltion position, use the Instlltion position templte provided on the inside cover of the product pcke. Open the wirin knockout with suitble tool e.. screwdriver. - 14 -
3 Instll the other portion of the mnet switch to the bck of the min unit or the brcket. Pull the wirin throuh the knockouts. When not usin the brcket When usin the brcket 1 Fix 1 Fix In In Tilt the brcket bout 45 nd pss throuh the wire. 4 Wirin spone pd Out 3 In 3 Out Mnet switch In 4 6 Wirin spone pd 5 Out 4 Instll brcket nd the min unit to the wlls surfce. 5 Connect the mnet switch wirin to the tmper terminl of the min unit. - 15 -
4 WALK TEST 1 Set the DIP switch 1 (LED ON/OFF) to ON. Check tht the detector detects n object in the intended detection re. The instlltion hs been successful if the LED lihts for two seconds fter person wlks into the detection re. Detected Not detected Note>> The switch is set ON by fctory defult. Note>> For the wlk test, move more thn 1.0 m (3'3") wy from the detector. 3 If the LED indiction is not required t ll times, set the DIP switch 1 (LED ON/OFF) to OFF. 5 SETTING PIR 1 (Do not touch) DIP switch 1. LED ON/OFF. IMMUNITY 3. AUX INPUT 4. PIR AND/OR PIR sensitivity selector PIR (Do not touch) Anti mskin sensitibity selector - 16 -
-LED ON/OFF DIP switch 1 HX-80N HX-80NAM OFF ON POSITION ON (Fctory defult) OFF FUNCTION The LED lihts when someone is detected. The LED does not liht even if someone is detected. -IMMUNITY DIP switch HX-80N HX-80NAM STD IMMUNITY POSITION STD (Fctory defult) IMMUNITY FUNCTION IMMUNITY loic is not ctivted. IMMUNITY loic is ctivted. Use this under hrsh environment (e.. veettion swy). HX-80N -AUX INPUT DIP switch 3 HX-80NAM By connectin secondry unit (nother wrnin sensor), you cn extend the detection re nd correct flse lrms. The secondry unit must hve volte free N.C. output such s nother PIR detector or AIR detector. <Infrred (AIR) sensors, therml line (PIR) sensors, mnet switches, etc.> AND OR Notes>> The lrm is only ctivtes if both the min unit nd the secondry unit re ctivted within 60 sec. In OR mode, secondry detector must be fitted. If not fitted, the unit will enerte n lrm continuously. POSITION AND (Fctory defult) OR FUNCTION When both the min unit nd the secondry detect someone, the lrm is ctivted. Choose this settin when secondry unit is not connected. When either the min unit or the secondry detects someone, the lrm is ctivted. -PIR AND/OR DIP switch 4 HX-80N HX-80NAM AND OR Note>> OR mode is pproprite for the sites tht require more detectbility rther thn flse lrm tolernce such s lihtin control nd cmer ctivtion. POSITION AND (Fctory defult) OR - 17 - FUNCTION An lrm is output when both PIR1 nd PIR detect n object. An lrm is output when either PIR1 or PIR detects n object. Selectin OR mode mkes detection rne loner thn AND mode. Wlk test to redjust the detection rne is required when OR is selected. Actul djustment should be conducted by djustin the brcket nle. OR mode only
-PIR SENSITIVITY PIR SENSITIVITY SELECTOR HX-80N HX-80NAM HIGH MIDDLE LOW POSITION HIGH MIDDLE (Fctory defult) LOW FUNCTION Hih sensitivity Middle sensitivity Low sensitivity -ANTI-MASKING SENSITIVITY ANTI-MASKING SENSITIVITY SELECTOR HX-80N HX-80NAM HIGH STD OFF POSITION HIGH STD (Fctory defult) OFF FUNCTION Hih sensitivity Norml sensitivity Disbled Cution>> After closin the cover, do not leve ny objects closer thn 1 meter from the unit. 6 LED INDICATION Red LED Blink Liht OFF DETECTOR CONDITION Wrm-up LED INDICATOR (RED ONLY) Blinks for pprox. 60 sec. Trouble output (HX- 80NAM only) Alrm Anti-Mskin bootin (Anti-Mskin strt up) Mskin detection Lihts for sec. Blinks times nd oes off for 5 sec. nd then repets for 180 sec. Blinks 3 times nd oes off for 3 sec. nd then repets. - 18 -
7 SPECIFICATIONS 7-1 SPECIFICATIONS Model HX-80N HX-80NAM Detection method Pssive infrred PIR Covere 4.0 m.0 m (80' 6'7") nrrow / 0 zones PIR distnce limit 6.5 m, 10.0 m, 13.0 m, 18.0 m (', 33', 4', 59') Detectble speed 0.3 m/s 1.5 m/s (1'/s 4'11"/s) Sensitivity.0 C (3.6 F) t 0.6 m/s Power input 9.5 18 V DC Current drw 35 ma (mx.) t 1 V DC 40 ma (mx.) t 1 V DC Alrm period.0 ±1 sec. Wrm-up period Approx. 60 sec. (LED blinks) Alrm output Form C 8 V DC 0. A (mx.) Tmper output N.C. 8 V DC, 0.1 A (mx.) N.C. open when cover removed. Trouble output N.C. 8 V DC, 0.1 A (mx.) Aux input N.C. 8 V DC, 0.1 A (mx.) LED indictor Red: Wrm-up, Alrm Red: Wrm-up, Alrm, Trouble RF interference No lrm 10 V/m Opertin temperture -0 +60 C (-4 +140 F) Environment humidity 95% mx. Wetherproof IP55 Mountin Wll Mountin heiht.5 3.0 m (8'" 9'10") Brcket djust nle Verticl: ±0 Horizontl: ±95 Weiht 70 (5.4 oz.) Accessories Brcket, Screw (4 0 mm) 4 *Specifictions nd desins re subject to chne without prior notice. - 19 -
7- DIMENSIONS Usin brcket Without brcket 86 (11.6) 93 (3.66) 05 (8.07) 93 (3.66) 197.5 (7.78) 197.5 (7.78) Unit: mm (inch) Unit: mm (inch) The HX-80N series is only prt of complete system, therefore we cnnot ccept complete responsibility for ny dmes or other consequences resultin from n intrusion. OPTEX CO., LTD. (JAPAN) (ISO 9001 Certified) (ISO 14001 Certified) 5-8-1 Ooto Otsu Shi 50-0101 JAPAN TEL:+81-77-579-8670 FAX:+81-77-579-8190 URL:http://www.optex.co.jp/e/ OPTEX INCORPORATED (USA) TEL:+1-909-993-5770 Tech:(800)966-7839 URL:http://www.optexmeric.com/ OPTEX (EUROPE) LTD. (UK) TEL:+44-168-631000 URL:http://www.optex-europe.com/ OPTEX SECURITY SAS (FRANCE) TEL:+33-437-55-50-50 URL:http://www.optex-security.com/ OPTEX SECURITY Sp. z o. o. (POLAND) TEL:+48--598-06-55 URL:http://www.optex.com.pl/ OPTEX KOREA CO., LTD. (KOREA) TEL:+8--719-5971 URL:http://www.optexkore.com/ OPTEX (DONGGUAN) CO., LTD. SHENZHEN OFFICE (CHINA) TEL:+86-755-3330950 URL:http://www.optexchin.com/ - 0 -