Alternative With the domestic kitchen market becoming more accepting of materials other than wood, Conestoga has expanded its focus to include several alternative materials to produce cabinet doors and components. Currently, medium density fiberboard (MDF) accounts for the majority of the alternative materials demand, but several other materials are gaining interest such as thermally structured surfaces (TSS), thermally fused laminates (TFL), Polyethylene, solid surface acrylics, Aluminum framed doors with glass and acrylic inserts. This newly created section of our Custom Product Manual highlights the products we make from these and other materials and provides you with the pertinent information. You can expect an even more diverse offering in the future as we add more new materials for you to choose from. Our goal is to stay in tune with these emerging alternative materials and if they gain a reasonable foothold in the market, appear to have the potential of a long life cycle and we can effectively acquire and convert them into usable components, it's highly likely we will add them to our Custom offering. As you review these materials you will notice that there is some variation in the pricing methodology of different products. Some products, such as the MDF and Polyethylene doors, use our traditional design plus material method, while other items including Aluminum framed products and solid surface high gloss acrylics use a square foot price. These different pricing methods are sometimes necessary due to our suppliers pricing structures that may not convert well into design plus material. Each of these products, whether manufactured or distributed by Conestoga, carry our one-year limited warranty and utilize the same tolerances as our wood doors in regard to sizing, bow, warp and twist, and shipping damage. Should you require assistance pricing any of these products or would simply like to know more about them, contact your Conestoga Sales Representative or Customer Service Team. Custom Products Summer 201.1
One-Piece MDF Door Designs Slab 10RC 10RC2 10RC3 1-1/4" x 1-1/4" Max: 48" x 96" 7-/8" x 7-/8" Max: 48" x 96" -7/8" x -7/8" Max: 48" x 96" 1-3/4" framing 7-3/4" x 7-3/4" Max: 48" x 96" 2" framing 10SQ1 10SQ2 10SQ3 10SQ 8-1/2" x 8-1/2" Max: 48" x 96" (single panel only) 2-1/2" framing 7-1/2" x 7-1/2" Max: 48" x 96" (single panel only) 7-/8" x 7-/8" Max: 48" x 96" 7-/8" x 7-/8" Max: 48" x 96" 1-3/4" framing Framing width listed is determined by measuring between the points indicated on the top edge of the cross section drawings. Note that the 10RC2, 10RC3 and 10SQ include only the face of the framing..2 Custom Products Summer 201
Offering And Availability All Conestoga products are available in a wide variety of specifications to satisfy your custom needs. The information below indicates any exceptions or limitations pertaining to the designs on the previous page. For a detailed listing of a particular product specification, refer to the page indicated. Material Material Pricing Guide All designs 3/4" MDF. Slab also available in 1". Edge Profiles pg 7.1 Framing Beads Panel Raises Finishing pgs 8.18-8.19 Options pgs 7.3-7.14 Mullions pg 6.1-6.3 Appliance Panels pg 6.19 All designs B-2, C-2, H-2, L-034, L-09 L-149, L-23, L-382, L-686, L-803, L-1160, LC-2, Machine Edge, PRS-2 and V-2 available in 3/4" profiles. 1" Slab B-2, C-2, H-2, L-09 L-149, L-23, L-382, L-803, L-1160, LC-2, Machine Edge, PRS-2 and V-2. All designs design specific, no options available. All profiles are design specific, no options. The RC series doors are radiused on the inside corners of the framing. The SQ series are square on the inside corners of the framing. MDF products greater than 26" wide or 48" high will be made with two equal panels, unless otherwise specified by the customer, except the 10SQ1 and 10SQ2 designs which are available in single panel only. All available with Colourtones, primers and Prism Paints. All designs back-routed hand pull, distressing levels 1 and 2, seal coat, concealed hinge boring and Soss hinges available except 10SQ frame only or mullion doors. B hinge rout requires stiles 1-1/16" or wider. Standard lite configurations available on 10RC, 10RC2, 10RC3, 10SQ3, 10SQ. Mullions not available with slab, 10SQ1 and 10SQ2. Apply over plywood or 1/4" MDF panel. Matching Drawer Fronts pgs.6-.7 All available except 10SQ1. Custom Products Summer 2017.3
One-Piece MDF Door Designs 30RC 20SQ3 30SQ3 $13.0-A 8-1/4" x 8-1/2" Max: 42" x 96" $22.00-A 8-1/4" x 9-3/8" Max: 42" x 96" $22.00-A 8-1/4" x 8-1/2" Max: 42" x 96" Top corners at ends of arch are radius corners 10SQF1 10SQF2 $2.00-A 6-/8" x 6-/8" Max: 42" x 96" $2.00-A 6-/8" x 6-/8" Max: 42" x 96".4 Framing width listed is determined by measuring between the points indicated on the top edge of the cross section drawings. Custom Products Summer 2017
Offering And Availability All Conestoga products are available in a wide variety of specifications to satisfy your custom needs. The information below indicates any exceptions or limitations pertaining to the designs on the previous page. For a detailed listing of a particular product specification, refer to the page indicated. Material Material Pricing Guide Edge Profiles pg 7.1 Framing Beads Panel Raises Finishing pgs 8.18-8.19 Options pgs 7.3-7.14 Mullions pgs 6.1-6.3 Appliance Panels pg 6.19 10SQF1 and 10SQF2 1SGP (One Side Glueable Paintable) MDF only. 30RC, 20SQ3 and 30SQ3 3/4" MDF only. All designs B-2, C-2, H-2, L-034, L-09 L-149, L-23, L-382, L-686, L-803, L-1160, LC-2, Machine Edge, PRS-2 and V-2 available in 3/4" profiles only. All designs design specific, no options available. All designs design specific, no options available. The RC series doors are radiused on the inside corners of the framing. The SQ series are square on the inside corners of the framing, except the top of the 30SQ3 which has a slight radius at the corners of the arch. MDF products greater than 26" wide or 48" high will be made with two equal panels, unless otherwise specified by the customer. All available with Colourtones, primers and Prism Paints. All designs back-routed hand pull, distressing levels 1 and 2, seal coat, concealed hinge boring and Soss hinges available. Standard lite configurations only. Apply over 1/4" MDF panel. Matching Drawer Fronts Not available. Custom Products Summer 2017.
One-Piece MDF Drawer Fronts Slab #10 Keystone $.00-A 1-1/4" x 1-1/4" $.2-A 3" x 3" $.2-A 2-3/4" x 2-3/4" 10RC 10RC2 10RC3 10SQ2 $12.00-A 8-1/4" x 6" 1-3/16" rails $8.7-A 6-1/2" x " 1" rails 1-3/4" stiles $9.0-A 8-1/4" x 6" 3/4" rails 2" stiles $19.00-A 7-7/8" x -3/4" 1-1/4" rails 10SQ3 10SQ 10SQF1 10SQF2 $19.00-A 7-7/8" x -3/4" 1-1/4" rails $19.00-A 8-1/4" x 6" 1-3/16" rails $2.00-A 7-/8" x " 1-3/16" rails $2.00-A 7-/8" x " 1-3/16" rails.6 Framing width listed is determined by measuring between the points indicated on the top edge of the cross section drawings. Note that the 10RC2, 10RC3 and 10SQ include only the face of the framing. Custom Products Summer 2017
Offering And Availability All Conestoga products are available in a wide variety of specifications to satisfy your custom needs. The information below indicates any exceptions or limitations pertaining to the designs on the previous page. For a detailed listing of a particular product specification, refer to the page indicated. Material Material Pricing Guide Edge Profiles pg 7.1 Framing Beads Panel Raises Finishing pgs 8.18-8.19 Options pgs 7.3-7.14 Appliance Panels pg 6.19 10SQF1 and 10SQF2 1SGP (One Side Glueable Paintable) MDF only. All other designs 3/4" MDF. Slab, #10 and Keystone also available in 1". 3/4" Slab B-2, C-2, H-2, L-034, L-09 L-149, L-23, L-382, L-686, L-803, L-1160, LC-2, Machine Edge, PRS-2 and V-2 available in 3/4" profiles only. 3/4" Keystone and 3/4" #10 B-2, C-2, H-2, L-09, L-149, L-23, L-382, L-686, L-803, L-1160, LC-2, Machine Edge, PRS-2 and V-2 available in 3/4" profiles only. 1 Slab B-2, C-2, H-2, L-09, L-149, L-23, L-382, L-803, L-1160, LC-2, Machine Edge, PRS-2 and V-2 available in 1" profiles only. 1" Keystone B-2, C-2, H-2, L-034, L-09, L-149, L-23, L-382, L-686, L-803, L-1160, LC-2, Machine Edge, PRS-2 and V-2 available in 1" profiles only. 1" #10 B-2, C-2, H-2, L-09, L-149, L-23, L-382, L-686, L-803, L-1160, LC-2, Machine Edge, PRS-2 and V-2 available in 3/4" profiles only. 10RC, 10RC2, 10RC3, 10SQ2, 10SQ3, 10SQ, 10SQF1 and 10SQF2 B-2, C-2, H-2, L-034, L-09, L-149, L-23, L-382, L-686, L-803, L-1160, LC-2, Machine Edge, PRS-2 and V-2 available in 3/4" profiles only. All designs design specific, no options available. All designs design specific, no options available. The RC series drawer fronts are radiused on the inside corners of the framing. The SQ series drawer fronts are square on the inside corners of the framing. All available with Colourtones, primers and Prism Paints. All designs back-routed hand pull, distressing levels 1 and 2 and seal coat. Apply over 1/4" MDF panel. Custom Products Summer 2017.7
Five-Piece MDF Doors Mortise & Tenon Designs Albany Amesbury CRP-10 Monroe $12.10-B 7" x 6-3/4" $13.10-B 7-1/2" x 7-1/2" /8" Reverse G-Cove $12.10-B 7-1/2" x 7-1/2" Slant $16.10-B 9" x 9" 2-3/4" framing P-602 Stockbridge TW-10 TW-1038 $10.1-A 7" x " 1/4" MDF Panel $10.1-A 7" x " 1/4" MDF Panel $12.10-A 7" x 6-1/2" 3/8" MDF Panel.8 Minimums listed are based on panel and will vary by raise; see Offering and Availability for additional options. Framing width listed is determined by measuring across the back of the framing unless otherwise noted. Custom Products Summer 2017
Offering And Availability All Conestoga products are available in a wide variety of specifications to satisfy your custom needs. The information below indicates any exceptions or limitations pertaining to the designs on the previous page. For a detailed listing of a particular product specification, refer to the page indicated. Material Material Pricing Guide Edge Profiles pg 7.1 Framing Beads Panel Raises Finishing pgs 8.18-8.19 All designs 3/4" MDF only. All designs B-2, C-2, H-2, L-034, L-09, L-149, L-23, L-382, L-686, L-803, L-1160, LC-2, Machine Edge, PRS-2 and V-2 available in 3/4" profiles only. CRP-10, Monroe, TW-10 and TW-1038 all published 3/4" profiles available. Albany, Amesbury and Stockbridge design specific, no options available. CRP-10 and Monroe all 3/4" profiles available except P-106. All other designs design specific, no options available. All available with all Colourtones, primers and Prism Paints. Options pgs 7.3-7.14 All designs back-routed hand pull, concealed hinge boring, distressing levels 1 and 2, seal coat, framing cut down, G-012, G-01 and G-06 panel grooves, putty pin holes and Soss hinge rout only. Mullions pgs 6.1-6.11 Appliance Panels pg 6.19 Matching Drawer Fronts pgs.12-.13 All available. All available. When ordering Amesbury mullion order as CRP-10 mullion with Square bead framing and Square bead mullion strips. Note: Paint Grade Hard Maple material used for mullion lite strips and #2, #906 and #907 glass retainer mouldings. Apply over 1/4" MDF panel. Custom Products Summer 2017.9
Five-Piece MDF Doors Mortise & Tenon Designs Ardmore Lafayette Prestwick Yardley $19.70-B 7" x 6-3/4" G-01 rout 1-1/2" spacing $23.70-B 7-7/8" x 7-/8" 2-3/4" framing G-06 rout 1-1/2" spacing $20.70-B 7-1/2" x 7-1/2" /8" Reverse G-Cove G-012 rout 2" spacing $19.70-B 7" x 6-3/4" G-012 rout 1-1/2" spacing.10 Minimums listed are based on panel and will vary by raise; see Offering and Availability for additional options. Framing width listed is determined by measuring across the back of the framing unless otherwise noted. Custom Products Summer 2017
Offering And Availability All Conestoga products are available in a wide variety of specifications to satisfy your custom needs. The information below indicates any exceptions or limitations pertaining to the designs on the previous page. For a detailed listing of a particular product specification, refer to the page indicated. Material Material Pricing Guide Edge Profiles pg 7.1 Framing Beads Panel Raises Finishing pgs 8.18-8.19 All designs 3/4" MDF only. All designs B-2, C-2, H-2, L-034, L-09, L-149, L-23, L-382, L-686, L-803, L-1160, LC-2, Machine Edge, PRS-2 and V-2 available in 3/4" profiles only. Ardmore, Lafayette and Yardley - all 3/4" profiles available. Prestwick design specific, no options available. Design specific, no options available. All available with Colourtones, primers and Prism Paints. Options pgs 7.3-7.14 All designs back-routed hand pull, concealed hinge boring, distressing levels 1 and 2, seal coat, framing cut down, putty pin holes and Soss hinge rout only. Mullions pgs 6.1-6.11 Appliance Panels pg 6.19 Matching Drawer Fronts pgs.12-.13 All available. All available. When ordering Prestwick mullion order as the CRP-10 mullion with Square bead framing and Square bead mullion strips. Note: Paint Grade Hard Maple material used for mullion lite strips and #2, #906 and #907 glass retainer mouldings. Apply over 1/4" MDF panel. Custom Products Summer 2017.11
Five-Piece MDF Drawer Fronts Mortise & Tenon Designs Albany Amesbury CRP-10 Monroe $14.60-B 7" x 3-7/8" $1.60-B 7" x 4-1/4" P-29 $14.60-B 7-1/2" x -3/4" Slant $18.20-B 8-3/8" x -7/8" 2-3/4" stiles G-Cove Stockbridge TW-10 TW-1038 $10.6-A 7" x 3-3/8" 1/4" MDF Panel $12.6-A 7" x 3-3/8" 1/4" MDF panel $14.60-A 7" x 4" 3/8" MDF panel Ardmore Lafayette Prestwick Yardley $22.20-B 7" x -1/8" G-01 rout 1-1/2" spacing $26.20-B 7-7/8" x 3-7/8" 2-3/4" stiles G-06 rout 1-1/2" spacing $23.20-B 7-1/2" x -7/8" P-29 G-012 rout 2" spacing $22.20-B 7" x -1/8" G-012 rout 1-1/2" spacing.12 Minimums listed are based on panel and will vary by raise; see Offering and Availability for additional options. Framing width listed is determined by measuring across the back of the framing unless otherwise noted. Custom Products Summer 2017
Offering And Availability All Conestoga products are available in a wide variety of specifications to satisfy your custom needs. The information below indicates any exceptions or limitations pertaining to the designs on the previous page. For a detailed listing of a particular product specification, refer to the page indicated. Material Material Pricing Guide Edge Profiles pg 7.1 Framing Beads Panel Raises Finishing pgs 8.18-8.19 Options pgs 7.3-7.14 Appliance Panels pg 6.19 All designs 3/4" MDF only. All designs B-2, C-2, H-2, L-034, L-09, L-149, L-23, L-382, L-686, L-803, L-1160, LC-2, Machine Edge, PRS-2 and V-2 available in 3/4" profiles only. Ardmore, CRP-10, Lafayette, Monroe, TW-10, TW-1038 and Yardley all 3/4" profiles available. Albany, Amesbury, Prestwick and Stockbridge design specific, no options available. Albany, Amesbury, Ardmore, Lafayette, Monroe, Prestwick, Stockbridge, TW-10, TW-1038 and Yardley design specific, no options available. CRP-10 all 3/4" profiles available except P-106. All available with Colourtones, primers and Prism Paints. Albany, Amesbury, CRP-10, Monroe, Stockbridge, TW-10 and TW-1038 back-routed hand pull, distressing levels 1 and 2, G-012, G-01 and G-06 panel grooves and putty pin holes only. Ardmore, Lafayette, Prestwick and Yardley back-routed hand pull, distressing and putty pin holes only. Apply over 1/4" MDF panel. Custom Products Summer 201.13
Five-Piece MDF Doors Miter Designs CRP-1389 CRP-1420 CRP-1033 CRP-1071 7-1/2" x 7-1/2" Slant 8-1/4" x 8-1/4" 2-11/16" framing Slant 7-1/2" x 7-1/2" Slant 7-1/2" x 7-1/2" Slant CRP-10827 CRP-1087 CRP-10946 Presidential Miter 7-1/2" x 7-1/2" Slant 8-/8" x 8-/8" 2-7/8" framing Slant 8" x 8" 2-1/16" framing shown 7-7/8" x 7-7/8" 2-1/2" framing Presidential.14 Minimums listed are based on panel and will vary by raise; see Offering and Availability for additional options. Framing width listed is determined by measuring across the back of the framing unless otherwise noted. Custom Products Summer 201
Offering And Availability All Conestoga products are available in a wide variety of specifications to satisfy your custom needs. The information below indicates any exceptions or limitations pertaining to the designs on the previous page. For a detailed listing of a particular product specification, refer to the page indicated. Material Material Pricing Guide Edge Profiles pg 7.1 Framing Beads Panel Raises Finishing pgs 8.18-8.19 All designs 3/4" MDF only. CRP-1389, CRP-1033, CRP-1071 and Presidential Miter B-2, C-2, H-2, L-034, L-09, L-149, L-23, L-382, L-686, L-803, L-1160, LC-2, Machine Edge, PRS-2 and V-2 available in 3/4" profiles only. CRP-1420, CRP-10827, CRP-1087 and CRP-10946 design specific, no options available. All designs design specific, no options available. All 3/4" profiles available except P-106. All available with Colourtones, primers and Prism Paints. Options pgs 7.3-7.14 All designs back-routed hand pull, concealed hinge boring, distressing levels 1 and 2, G-012, G-01 and G-06 panel grooves and putty pin holes. Soss hinge rout available on all designs except CRP-10827 and CRP-10946. Mullions pgs 6.1-6.11 Appliance Panels pg 6.19 Matching Drawer Fronts pgs.16-.17 All available. All available. All incur special lite charges. Note: Paint Grade Hard Maple material used for mullion lite strips and #2, #906 and #907 glass retainer mouldings. Apply over 1/4" MDF panel. Custom Products Summer 201.1
Five-Piece MDF Drawer Fronts Miter Designs CRP-1389 CRP-1420 CRP-1033 CRP-1071 6-7/8" x 6-7/8" 2" framing Slant 4-7/8" x 4-7/8" 2" framing -1/2" x -1/2" -1/2" x -1/2" CRP-10827 CRP-1087 CRP-10946 Presidential Miter -1/2" x -1/2" 4-7/8" x 4-7/8" 2" framing 4-7/16" x 4-7/16" 1-/8" framing -7/8" x -7/8" 2-1/2" framing.16 Minimums listed are based on panel and will vary by raise; see Offering and Availability for additional options. Framing width listed is determined by measuring across the back of the framing unless otherwise noted. Custom Products Summer 201
Offering And Availability All Conestoga products are available in a wide variety of specifications to satisfy your custom needs. The information below indicates any exceptions or limitations pertaining to the designs on the previous page. For a detailed listing of a particular product specification, refer to the page indicated. Material Material Pricing Guide Edge Profiles pg 7.1 Framing Beads Panel Raises Finishing pgs 8.18-8.19 Options pgs 7.3-7.14 Appliance Panels pg 6.19 All designs 3/4" MDF only. CRP-1389, CRP-1033, CRP-1071 and Presidential Miter B-2, C-2, H-2, L-034, L-09, L-149, L-23, L-382, L-686, L-803, L-1160, LC-2, Machine Edge, PRS-2 and V-2 available in 3/4" profiles only. CRP-1420, CRP-10827, CRP-1087 and CRP-10946 design specific, no options available. All designs design specific, no options available. All 3/4" profiles available except P-106. All available with Colourtones, primers and Prism Paints. All designs back-routed hand pull, distressing levels 1 and 2, G-012, G-01 and G-06 panel grooves and putty pin holes only. Apply over 1/4" MDF panel. Custom Products Summer 201.17
Five-Piece MDF Doors Applied Moulding Designs Churchill CRP-10161 CRP-10797 CRP-101728 8-7/8" x 8-7/8" 2-3/4" framing P-008 7" x 6-3/4" 7" x 6-3/4" 7" x 6-3/4" CRP-10A48 Hancock TW-10161 TW-101728 9-3/8" x 9-3/8" 3" framing P-008 9" x 9" 2-3/4" framing P-602 7-1/2" x 6" 1/4" MDF panel 7-3/8" x 7-3/8" 1/4" MDF panel.18 Note: Applied moulding designs consist of wood mouldings mounted onto framing of -piece MDF doors and drawer fronts. Minimums listed are based on panel and will vary by raise; see Offering and Availability for additional options. Framing width listed is determined by measuring across the back of the framing unless otherwise noted. Custom Products Summer 201
Offering And Availability All Conestoga products are available in a wide variety of specifications to satisfy your custom needs. The information below indicates any exceptions or limitations pertaining to the designs on the previous page. For a detailed listing of a particular product specification, refer to the page indicated. Material Material Pricing Guide Edge Profiles pg 7.1 Framing Beads Panel Raises Finishing pgs 8.18-8.19 All designs 3/4" MDF only. All designs B-2, C-2, H-2, L-034, L-09, L-149, L-23, L-382, L-686, L-803, L-1160, LC-2, Machine Edge, PRS-2 and V-2 are available in 3/4" profiles only. Churchill, CRP-10A48 all published 3/4" profiles available. CRP-10161, CRP-10797, CRP-101728, Hancock, TW-10161 and TW-101728 design specific, no options available. Churchill and CRP-10A48 all published 3/4" profiles available except P-106. CRP- 10161, CRP-101728 and Hancock P-07, P-602, Presidential and Reverse G-Cove available in 3/4" profiles only. CRP-10797 M-Bead, P-07, P-602, Presidential, Reverse G-Cove and RM available in 3/4" profiles only. TW-10161 and TW-101728 design specific, no options available. All available with Colourtones, primers and Prism Paints. Options pgs 7.3-7.14 All designs back-routed hand pull, concealed hinge boring, distressing levels 1 and 2, framing cut down, G-012, G-01 and G-06 panel grooves, putty pin holes and Soss hinge rout only. Mullions pgs 6.1-6.11 Appliance Panels pg 6.19 Matching Drawer Fronts pgs.20-.21 All available. Available with all designs. CRP-10161, CRP-10797, CRP-101728, Hancock, TW-10161 and TW-101728 incur special lite charges. Note: Paint Grade Hard Maple material used for mullion lite strips and #2, #906 and #907 glass retainer mouldings. Apply over 1/4" MDF panel. Custom Products Summer 201.19
Five-Piece MDF Drawer Fronts Applied Moulding Designs Churchill CRP-10161 CRP-10797 CRP-101728 7-7/8" x 4-7/8" 2" rails 2-3/4" stiles 7" x 4-1/8" 7" x 4" 7" x 4-1/2" CRP-10A48 Hancock TW-10161 TW-101728 8-3/8" x 4-7/8" 2" rails 3" stiles 7-7/8" x -1/8" 2-3/4" stiles 7-1/2" x " 1/4" MDF panel 7-3/8" x 4-1/2" 1/4" MDF panel.20 Note: Applied moulding designs consist of wood mouldings mounted onto framing of -piece MDF doors and drawer fronts. Minimums listed are based on panel and will vary by raise; see Offering and Availability for additional options. Framing width listed is determined by measuring across the back of the framing unless otherwise noted. Custom Products Summer 201
Offering And Availability All Conestoga products are available in a wide variety of specifications to satisfy your custom needs. The information below indicates any exceptions or limitations pertaining to the designs on the previous page. For a detailed listing of a particular product specification, refer to the page indicated. Material Material Pricing Guide Edge Profiles pg 7.1 Framing Beads Panel Raises Finishing pgs 8.18-8.19 All designs 3/4" MDF only. All designs B-2, C-2, H-2, L-034, L-09, L-149, L-23, L-382, L-686, L-803, L-1160, LC-2, Machine Edge, PRS-2 and V-2 available in 3/4" profiles only. Churchill and CRP-10A48 all 3/4" profiles available. CRP-10161, CRP-10797, CRP- 101728, Hancock, TW-10161 and TW-101728 design specific, no options available. Churchill and CRP-10A48 all 3/4" profiles available except P-106. CRP-10161, CRP-101728 and Hancock P-07, P-602, Presidential and Reverse G-Cove available in 3/4" profiles only. CRP-10797 M-Bead, P-07, P-602, Presidential, Reverse G-Cove and RM available in 3/4" profiles only. TW-10161 and TW-101728 design specific, no options available. All available with Colourtones, primers and Prism Paints. Options pgs 7.3-7.14 All designs back-routed hand pull, distressing levels 1 and 2, seal coat, G-012, G-01 and G-06 panel grooves and putty pin holes only. Appliance Panels pg 6.19 Apply over 1/4" MDF panel. Custom Products Summer 2017.21