Output Power (W) Output Voltage (V) Output Current (A) Efficiency@ Max Load Max Case Temp. ( C) Input Current Max. Input Power (W) Inrush Current (Apk/50%-µs) THD @ Max Load (%) Power Factor @ Max Load Surge Protection Common/Diff (KV/2ohm) Weight (kgs) 75 53 ~ 107 0.7 220 V 230 V 240 V 80 C 2 0 0v 2 2 0v 2 40v 87 220 Vin 230 Vin 32/ 389 33. 9/ 380 15 >0.95 4/4 0.63 90.7 90.8 90.9 0.42 0.38 0.34 240 Vin 35. 7 / 374 Wire Diagram Enclosure Input and output use lead- wires. Lead-wires are 18AWG 105C/600V solid copper. Standard Lead Length is 315mm +/-10mm on all wires outside the can in. (mm) Case Length 5.47 (139) Case Width 2.36 (60) Case Height 1.54 (39) Mounting Length 5.98 (152) Mounting Width 1.69 (43) Overall Length 6.61 (168)
Product Data Order code Full product code Full product name Xitanium 75W 0.7A 230V-Y cxt Net weight per piece 0.63kg Interfaces No Ambient Temp Range -40C to +55C Corresponding Tcase -15C to +80C Shipment and Storage Temp -40C to +80C Shipment and Storage Humidity 10% to 95% RH Line Voltage 220-240V (certified) and 85-305V (workable) Line Current 0.38A/220V Line Frequency 50/60Hz Life @ TC 65 C 100,000 hr [nom] refer to graph below Life @ TC 75 C 50,000 hr [nom] refer to graph below Max TC 80C Inrush current Width Refer to table Maximum ballast number on MCB 16A 11 [max] Input Over-voltage Can survive input over-voltage stress of 320VAC for 48 hours and 350VAC for 2 hours LED Current Tolerance +/-5% Earth leakage current 0.7 ma [max] Mains voltage safety (AC) +/-10% Mains voltage performance (AC) +/-10% Min. Mains voltage operational 198 V [min] Output peak voltage 190V [max] Output Current ripple 15% @ 700 ma (ripple = pk-pk/2 x avg) THD total < 20% THD 3 rd Harmonic < 15% PF @ Max Load >0.95 Wire Isolation All wires are Double isolated to ground Protections Short Circuit and Open Circuit Protection for LED + and LED- Installation & Application Notes: Section I Physical Characteristics 1.1 LED Driver shall be installed inside an electrical enclosure 1.2 External SPD has to be added to work with this driver in the luminaire design. 1.3 Wiring inside electrical enclosure shall comply with 600V/105 C rating or higher. Section II Performance 2.1 LED Driver has a rated lifetime of 50,000 hours @ TC <=80C. 2.2 LED Driver tolerates sustained open circuit and short circuit output conditions without damage. 2.3 LED Driver maximum allowable case temperature is 80 C see product label for measurement location. 2.4 LED Driver reduces output power to LEDs if its case temperature exceeds >90 C thermal protection and eventually reduces output current to zero. 2.5 LED Driver complies with the requirements of CE, CISPR 15 Ed 7.2 and CQC.
Vin V.S. Eff @ Full load 91.00% 90.90% 90.80% 90.70% 90.60% 90.50% 90.40% 90.30% 190 200 210 220 230 240 250 88.40% Vin V.S. Eff @ Half load 88.30% 88.20% 88.10% 190 200 210 220 230 240 250
Vin V.S. THD @ Full load 14.50% 14.00% 13.50% 13.00% 12.50% 12.00% 11.50% 11.00% 10.50% 10.00% 9.50% 9.00% 8.50% 190 200 210 220 230 240 250 Vin V.S. THD @ Half load 17.50% 17.00% 16.50% 16.00% 15.50% 15.00% 14.50% 14.00% 13.50% 13.00% 12.50% 12.00% 11.50% 190 200 210 220 230 240 250
Performance vs. Ambient temperature 100.00 90.00 80.00 70.00 60.00 50.00 40.00 30.00 Pin VS T Po VS T Pin VS T half load Po VS T half load 20.00 10.00 0.00-40 -20 0 20 40 60 Io vs. Ambient temperature 703.00 702.00 701.00 700.00 699.00 698.00 697.00 696.00 695.00 694.00 693.00 692.00-40 -20 0 20 40 60 Io VS T Full load Io VS T Half load
THD vs. Ambient temperature 18.00% 16.00% 14.00% 12.00% 10.00% 8.00% 6.00% THD VS T Full load THD VS T Half load 4.00% 2.00% 0.00% -40-20 0 20 40 60 Effi vs. Ambient temperature 91.00 90.00 89.00 88.00 87.00 Eff VS T Full load Eff VS T Half load 86.00 85.00-40 -20 0 20 40 60
Iout (%) Electrical Specifications Iout vs. Tcase of Driver: Iout (%) vs. Tcase (driver) 120 100 80 60 40 20 0-25 -20-15 -10-5 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 Tcase (C ) with +/- 5C Tolerance Inrush Current Info: Vin Ipeak T (@ 50% of Ipeak) 220 Vrms 32A 389 µs 230 Vrms 33.9 A 380 µs 240 Vrms 35.7 A 374 µs
Life (khours) Electrical Specifications Lifetime vs. Tcase of Driver: 110 100 90 80 70 60 50 40 30 25 30 35 40 45 50 55 60 65 70 75 80 85 Tcase (deg. C) Failure Rate Info: <0.01% per 1 khr @<= Tcase 70 C Isolation: Lifetime vs Tcase Isolation Input Output Wires Wires Chassis Input Wires NA 1480 Vac 1480 Vac Output Wires 1480 Vac NA 1480 Vac Chassis 1480 Vac 1480 Vac NA
Mechanical drawing: A1 A2 A3 B1 B2 C1 D1 168mm 152mm 139mm 60mm 43mm 39mm 8mm