Electrical and HVAC Test Tools The New Fluke 330 Series Clamp Meters New Fluke Products! 330 Series Clamp Meters 1520 MegOhmMeter 43B Power Quality Analyzer 170 Series Digital Multimeters 110 Series Digital Multimeters
Easy-to-use digital multimeters that help you to get the job done 170 Series DMMs The Tough and Accurate Meters The new Fluke 170 Series offers both brains and brawn. Packed with features, easy-to-use ergonomic design, a new backlit display for better readability, and a battery access door that leaves the calibration seal intact. Plus, there s a lifetime guarantee for all three models. CAT IV 1000V Fluke 179 New features include temperature and a backlight. Other features include: 1000 V range True-rms ac voltage and current Resistance Frequency, continuity and capacitance MIN/MAX/AVG Diode test PENDING Fluke 16 Multimeter with Temperature Three tools in one: thermometer, flame rod tester with microamp function, and multimeter with capacitance. Includes an 80BK temperature module. Three-year warranty. Fluke 177 True-rms multimeter with a backlight. Other features include: 1000 V range True-rms ac voltage and current Resistance Frequency, continuity and capacitance MIN/MAX/AVG Diode test 110 Series DMMs The Compact Meters Sometimes smaller is better. The new Fluke 110 Series DMMs pack more features than some DMMs twice their size. True-rms ac voltage and current readings. 6000 count display. MIN/MAX/AVG. Optional Fluke ToolPak meter hanging kit available. The 110 Series includes three models: 110, 111, 112. Three-year warranty. Fluke 175 Features include: 1000 V range True-rms ac voltage and current Resistance Frequency, continuity and capacitance MIN/MAX/AVG Diode test Fluke 87 Series III True-rms Digital Multimeter Features include 250µS peak MIN/MAX for true peak transient capture, 0.05% basic dc accuracy, backlit display with larger digits, a battery access door that leaves the calibration seal intact, and splash-proof, dust resistant case with enhanced EMI shielding. Lifetime warranty. 1000V CAT IV Fluke 110 Digital Multimeter Fluke 111 Digital Multimeter Fluke 112 Digital Multimeter Fluke 175 Digital Multimeter Fluke 177 Digital Multimeter Fluke 179 Digital Multimeter Fluke 16 Multimeter Fluke 87-III Digital Multimeter 2
330 Series Clamp Meters The Fluke 330 Series gives clamp meter a whole new meaning. Five new models offer an impressive array of innovative features with current ranges up to 1000 A. Choose the model that matches the jobs you do. New! Large, backlit display (on most models) is easy to see New! Auto shut-off maximizes battery life so the meter works when you need it In-rush current function (on most models) for measuring starting current for motors, lighting, etc. Small body and jaws fit perfectly in your hand and into tight places Improved low current measurement accuracy from new microprocessor technology Meter controls are positioned so current measurements can be done with one hand Handy display hold keeps measurements on the display Backed by Fluke technical phone support, repair, parts and calibration service Three-year warranty Leading the way with innovative features that fit the way you work. Features 333 334 335 336 337 Backlight Amps AC 400.0 600.0 600.0 600.0 999.9 Amps DC 600.0 999.9 TRMS Volts 600.0 600.0 600.0 600.0 600.0 AC & DC Basic current 2% 2% 2% 2% 2% accuracy Resistance 600 600.0/6K 600.0/6K 600.0/6K 600.0/6K (Ohms) Continuity beeper Frequency 400.0 (Hz) Min/Max capture Inrush current DC zero button Jaw size 1.2 1.2 1.2 1.2 1.2 Maximum 750 MCM 750 MCM 750 MCM 750 MCM 750 MCM wire size Fluke 333 Fluke 334 Fluke 335 Fluke 336 Fluke 337 H3 Holster H3 Holster Rugged holster with built-in pocket and velcro flap for test lead storage. Convenient belt loop with snap. Recommended for the 330 Series Clamp Meters. 3
Power quality test tools Fluke 43B Power Quality Analyzer The Fluke 43B Power Quality Analyzer performs the measurements you need to maintain power systems, troubleshoot power problems and diagnose equipment failures. All in a rugged handheld package. Combines capabilities of power quality analyzer, multimeter and scope New! 20 measurement memories to save/recall screens and data with cursor readings New! Calculates 3-phase power on balanced loads, from a single-phase measurement Measure power consumption, harmonics, and catch intermittents New! Toggle through the most commonly used power quality modes with a single keystroke Monitoring functions help track intermittent problems and power system performance New! FlukeView software can log harmonics and other readings over time New! FlukeView software provides complete harmonics profile up to the 51st harmonic Three-year warranty Fluke 41B Power Harmonics Analyzer Displays the harmonic spectrum, waveform and complete power data for nonlinear waveforms. Saves up to eight sets of measurement data. Use the included FlukeView software to download data to your PC for analysis and presentation. VR101S Voltage Event Recorder System The VR101S records sags, swells, transients, outages and frequency variations on line voltage at receptacles, where the most sensitive loads are connected. The VR101S is a starter system that includes a compact VR101 event recorder, an optical interface cable, and EventView software that turns your PC into a power quality reporting tool. Additional VR101 Event Recorders can be purchased individually, so you can monitor several locations at once. Fluke 43B Power Quality Analyzer Fluke 41B Power Harmonics Analyzer VR101S Voltage Event Recorder System VS101 Voltage Event Recorder 4
Electrical testers for basic measurements Fluke VoltAlert Voltage Detectors Pocket-sized, non-contact ac voltage detectors glow red when the tip is placed on an outlet or conductor if voltage is present. Available in two voltage levels: the Fluke 1AC for 90Vac to ac, and the 1LAC for 24Vac to 90Vac. Fluke T5-600 and T5-1000 Electrical tester for continuity/ohms, ac amps and 600 (model T5-600) or 1000 (model T5-1000) volts ac/dc. New Openjaw technology for up to 100 amps ac, with 0.1 amp resolution. Optional holsters available. Two-year warranty. 1000V H5 Holster Belt loop holster designed for carrying the T3 and T5 Electrical Testers. T3 Tester Easy-to-use, economical, two-pole tester with 7-level LED indicator for ac and dc voltage and continuity. Auto-on light lets you know it s working and automatically turns off after eight minutes. Test leads and probes included. Optional holster available. One year warranty. 1000V CAT IV C520 Leather Tester Case Oiled, top grain cowhide case with large belt loop holds Fluke T5 electrical testers. Size (H x L x W) 100 mm x 200 mm x 125 mm (4" x 8" x 5"). Fluke 7-300 and 7-600 For fast, accurate tests of electrical power. Nothing makes the job easier; automatic readings of ac and dc voltage, and ohms. Two-year warranty. T5-1000 T5-600 T3 7-300 7-600 VoltAlert 1LAC VoltAlert 1AC H5 Holster C520 Tester Case 5
Accurate temperature solutions to go Fluke 65 Lasersighted Infrared Thermometer The Fluke 65 Infrared Thermometer provides quick noncontact temperature measurement, with a laser beam for easy targeting. The large, backlit display is simple to read. Features a rugged holster, MIN/MAX function, and temperature memory. Fluke 50 Series II Digital Thermometers Four models that provide laboratory accuracy in a rugged, fast responding, handheld tool with: Large backlit dual display. MIN, MAX and AVG with time references to capture major events. Electronic offset function allowing user to compensate for thermocouple errors. Support for a wide range of thermocouple types. Temperatures displayed in F, C, or Kelvin (K). Powerful data logging capabilities on the Fluke 53 and 54 allow the user to log up to 500 points of data to internal memory. Recall function brings logged data to the meter display for easy review. Splash and dust resistant case design, tested to withstand one meter drop. Three-year warranty. Fluke 50S and 50D Digital Thermometers Reliable, Fluke-quality thermometers at our best value pricing. The Fluke 50S is a basic, single-input thermometer that accepts J or K-type thermocouples and has a hold mode that freezes display for convenient viewing. The Fluke 50D is great for measuring input/output changes and differential trends. It has all the features of the 50S plus: Dual channel with differential output (T1-T2) MIN/MAX recording to capture events Scan function continuously scans through measurement sequence (T1, T2, T2-T2) Fluke 65 Specifications Range Response Time -40 to 500 C (-40 to 932 F) Less than 1 second Resolution 0.1 up to 200, 1 over 200 Repeatability ± 1 or ± 1%, whichever is greater Accuracy Optical resolution Above 0 C (32 F): ± 2 C (± 4 F) Below 0 C (32 F): ± 5 C (± 9 F) (With instrument stable at 23 C ± 3 C) Emissivity Fixed at 0.95 8:1 Distance to Spot Size Ratio Battery life Approximately 4000 measurements (2 X AA) Specifications 6 Features 54 Series II 53 Series II 52 Series II 51 Series II 50D 50S Thermocouple types K, J, T, E, R, S, N K, J, T, E, R, S, N K, J, T, E K, J, T, E K, J K, J Number of inputs Dual Single Dual Single Dual Single Time stamp Time of Day Time of Day Relative Time Relative Time Rugged design with holster Splash / dust resistant Dual display with backlight MIN/MAX/AVG record Compatible with ToolPak (T1 T2) readout Logging up to 500 points IR port for download to PC 80TK Thermocouple Module Converts digital multimeters to a thermometer, via standard banana plugs. Uses K type thermocouples, listed below. 51-2 Digital Thermometer, Single Input 52-2 Digital Thermometer, Dual Input 53-2 Datalogging Thermometer, Single Input 54-2 Datalogging Thermometer, Dual Input FVF-SC1 FlukeView Forms Software 50S Digital Thermometer, Single Input 50D Digital Thermometer, Dual Input 65 Infrared Thermometer 80-TK Thermocouple Module
Test leads, probes, clips, holsters and cases Slim-Reach TP1 Test Probes One red, one black detachable probe, with flat blades to fit snugly into blade type wall sockets., 1000 V, 10 A. TP38 Test Probes Stainless steel probe insulated to 4 mm from end., 1000 V, 10 A. AC20 Industrial Test Clips Spring-loaded alligator clips with 20 mm (0.79") opening., 1000 V, 10 A. 80i-400 AC Current Clamp AC current clamp with safety shrouded banana plugs for multimeters. Measures ac current from 1 A to 400 A. Output to meter is 1 ma/a. Frequency response: 48 Hz to 1000 Hz. Maximum conductor size: one 30 mm (1.18") or two each 25 mm (0.98"). TL27 Heavy Duty Test Leads Rugged EPDM insulation, 1.5 meters (63") long with shrouded straight connectors and excellent strain reliefs on each end., 1000 V, 10 A AC86 Extra Large Alligator Clips Insulated banana jack-style, Aggressively curved jaw for superior gripping., 1000 V, 10 A AC87 Heavy Duty Bus Bar Clips Plunger style, safety grip operation with insulated, right angle jaws. Adjustable jaws open to grip flat bus bars or round conductors., 1000 V, 10 A C510 Leather Meter Case Oiled, top grain cowhide case with large belt loop holds most Fluke DMMs, Thermometers and Process Meters. Size (H x L x W) 100 mm x 275 mm x 175 mm (4" x 11" x 7"). i200 AC Current Clamp AC current clamp with safety shrouded banana plugs for multimeters. Maximum current 240 A ac. Output to meter is 1 ma/a. Frequency response: 40 Hz to 10 khz. Maximum conductor size: 20 mm (0.79"). i410 and i1010 AC/DC Current Clamps Low-cost current clamps for ac/dc current measurements. Both models provide superior noise immunity and are supplied with heat resistant cables with safety shrouded banana plugs for multimeters. The Fluke i410 measures up to 400 A ac or dc, and the i1010 measures up to 600 A ac and 1000 A dc. TL23F Electrical Test Lead Set One red, one black siliconeinsulated test leads, AC20 Industrial Test Clips, Slim-Reach TP1 Test Probes, designed to fit snugly into blade type wall sockets. 80PK-8 Pipe Clamp Temperature Probe Type-K thermocouple for fast temperature and super heat measurements of pipe surfaces. Measurement range: -29 to 149 C (-20 to 300 F) for pipe surfaces from 6.4 mm to 34.9 mm. ToolPak Meter Hanging Kit Compatible with Fluke 180, 170, 110 Series, 70 Series III, 50 Series II, 724 and 725. Includes magnet, two straps, and two clips and 70 Series adapter. C550 Premium Tool Bag Rugged, weather resistant ballistic cloth bag has steel reinforced frame and 25 internal storage pockets. Size (H x L x W) 325 mm x 500 mm x 225 mm (13" x 20" x 9"). 7
The new Fluke 1520 MegOhmMeter So handy it takes a display this big to show you all of the features. Large, backlit LCD with analog bar graph and digital display Three output voltages for insulation resistance testing: 250 V, 500 V, 1000 V Insulation resistance testing up to 4000 MΩ; switches automatically to voltage measurement when voltage is greater than 30 V ac or 30 V dc AC/DC voltage measurement up to 600 V Lo-Ohms function for testing connections Last reading memory display Four C-cell batteries for up to 5,000 tests per EN61557-2, with battery-life indicator and auto shut-off Autodischarge of capacitive voltage charges Heavy duty TL27 test leads, AC86 alligator clips and TP74 test probes Rugged, splash-proof case with impact-absorbing holster Protective holster with hand strap Carrying case with accessory storage Three-year warranty Specifications Fluke 1520 MegOhmMeter Accessories TL27 Heavy Duty Test Lead Set SH100 Shoulder Strap TPAK Strap and Magnet Function Range Accuracy Resolution Insulation resistance Auto ranges 4.000 MΩ, 40.00 MΩ, To 100 MΩ: 2% + 2 counts 0.001 MΩ to 10 MΩ 400.0 MΩ, 4000 MΩ Over 100 MΩ: 10% + 2 counts +1%/GΩ Test voltages 250 V, 500 V, 1000 V +20%, -0% Max measurement current 1 ma Audible/visible voltage warning 30 V ac or dc Lo-Ohms Resistance O to 40.00 Ω 2% + 2 counts 0.01 Ω Analog bar graph 0 to 100 Ω Audible/visible voltage warning 30 V ac or dc Resistance Resistance 4 k Ω 2% + 2 counts 1 Ω Analog bar graph 0 to 10 kω Voltage Voltage 0 to 600 V ac (50/60 Hz) 2% + 2 counts 1 V