OPTIV CLASSIC 321 GL TECHNICAL DATA

OPTIV CLASSIC 321 GL TECHNICAL DATA

TECHNICAL DATA Product description The Optiv Classic 321 GL offers an innovative design for non-contact measurement. The benchtop video-based measuring machine is equipped with a digital CCD color camera and a motorised CNC zoom as standard. The Optiv Classic 321 GL provides easy pallet station integration with good accessibility to the table from all sides. Measurement software is PC-DMIS Vision. Fields of application Shop floor and inspection room Versatile geometry measurements and GD&T analysis Design Design principle: Benchtop unit of proven cross-table design Guides: Mechanical linear guides on all axes, counterbalance on Z axis Drives: DC servo motors, power transmission via drive belts Length measuring system: Incremental, optoelectronic length measuring system Resolution of the scales: 0.05 µm Measuring range (X x Y x Z) Optiv Classic 321 GL Measuring range X Y Z 300 mm (11.81 in.) 200 mm (7.87 in.) 150 mm (5.91 in.) Loading capacity Load-bearing capacity of the table up to 20 kg Dimensions in mm and weights in kg Dimensions see machine layout on page 4 Machine weight 170 kg Measuring accuracy (1) (1) The conditions of acceptance of Hexagon Metrology Vision apply. L = measurement length in mm At 20 C, with Vision sensor, at 4-times magnification with standard lens for XY and max. zoom for Z, standard measuring plane (1) X, Y measuring accuracy MPE (Ex, Ey) = (1.6 + L/250) μm XY measuring accuracy MPE (Exy) = (2.0 + L/250) μm Z measuring accuracy MPE (Ez) = (3.9 + L/200) μm 2 Optiv Classic 321 GL Version November 2015

TECHNICAL DATA Airborne noise emissions The A-weighted emission sound pressure level at operator s position is less than 70 db(a). Environmental requirements Air humidity 40 % - 70 % RL, non-condensing Environmental temperature 20 C ± 1 C Permissible temperature gradient 0.8 C/h, 1.0 C/d, 0.6 C/m Throughput traversing speed X, Y, Z = 160 mm/s Vision sensor Technical description Sensor for non-contact measurement of smallest and closely toleranced features High resolution digital 1/2-inch CCD color camera with Gigabit Ethernet interface, for interference-free, low noise image reproduction Maximum optical precision due to low distortion optics Motorised CNC zoom with 0.5x, 0.75x, 1.5x or 2x lens Powerful image processing Fast, precision video autofocus Automatic feature detection, geometry and bad pixel video filters Contour scanning mode: Sophisticated set of user-selectable algorithms to setup edge detection, intelligent, automatic selection of the most suitable setting for the measurement Best fit routines AutoTune: Transferability of measuring programs between machines of the same type MultiCapture: MultiCapture allows all 2D features within a to be captured simultaneously, regardless of the feature type. Inspection speeds can be increased by 35 % or more, depending on the feature size and density. The capture sequence for groups of features using MultiCapture is also automatically optimized, creating the most efficient possible path with the fewest number of stage movements. RGB Sensitivity Adjustments for color cameras: Software controls for Red/Green/Blue (RGB) sensitivity in images from a color camera allow for fine control adjustment over image contrast. This capability improves overall consistency in vision inspection in general and is especially useful for colored parts where edges can be difficult to capture with grayscale or lighting modifications alone. Illumination for Vision sensor Coaxial LED top light - white LED LED back light - green LED + diffusing plate Multi-segment LED ring light 4 x 90 + 8 x 45 segments CNC zoom Motorised zoom, for a continuous adjustment of and resolution Standard: 6.5x Option: 12x High resolution digital 1/2-inch CCD color camera (H 768 x V 576) with Gigabit Ethernet interface Available lenses: 0.5x, 0.75x, 1.5x, 2x (1) The working distance is from bottom of lens with adapter to object plane (adapter thickness 6-10 mm). (2) The multi-segment LED ring light can not be used. Lens Magnification variants of the 6.5x CNC zoom on a 21.5 inch monitor Magnification Working distance (1) workpiece height Min. 0.5x 10x to 67x 175 0 to 45 17.1 x 12.8 3.0 x 2.3 0.75 16x to 101x 113 0 to 110 11.4 x 8.4 2.0 x 1.5 Standard 21x to 134x 92 0 to 130 8.5 x 6.4 1.5 x 1.1 1.5x 31x to 202x 51 0 to 170 5.7 x 4.3 1.1 x 0.8 2x (2) 42x to 269x 36 15 to 185 4.3 x 3.2 0.8 x 0.6 Optiv Classic 321 GL Version November 2015 3

TECHNICAL DATA (1) The working distance is from bottom of lens with adapter to object plane (adapter thickness 6-10 mm). (2) The multi-segment LED ring light can not be used. Lens Magnification variants of the 12x CNC zoom on a 20 inch monitor Magnification Working distance (1) workpiece height Min. 0.5x 9x to 105x 165 0 to 55 14.7 x 11.0 2.0 x 1.5 0.75 13x to 158x 108 0 to 115 13.1 x 9.8 1.3 x 1.0 Standard 17x to 209x 86 0 to 135 9.8 x 7.4 1.0 x 0.7 1.5x 26x to 314x 50 0 to 170 6.6 x 4.9 0.7 x 0.5 2x (2) 35x to 418x 32 15 to 190 4.9 x 3.7 0.5 x 0.4 Control system and safety regulations Machine control unit: DELL computer system with Microsoft Windows 7 Ultimate (32 bit) CNC controller: 3 axes microprocessor CNC with vector path control Safety equipment: Emergency-Stop circuit with Emergency-Stop button Scale signal monitoring Protective covers for the axes drives Safety regulations: EN ISO 12100-1 and -2 (Safety of machinery) EN 60204-1 (Safety of machinery - Electrical equipment of machines) EN 61000-6-2 and -4 (Electromagnetic compatibility EMC) EN 61010-1 (Safety requirements for electrical equipment for measurement, control and laboratory use) EN 61326-1 (Electrical equipment for measurement, control and laboratory use - EMC requirements) Supply data Input voltage power supply 110-240 V ± 10%, frequency 50-60 Hz Input voltage machine 24 V, continuous Power consumption < 120 W (without PC) Other optional equipment Indexing rotary stage Periphery: Worktable Printers, monitors Uninterruptible power supply (UPS) MACHINE LAYOUT 4 Optiv Classic 321 GL Version November 2015

STAGE LAYOUT Optiv Classic 321 GL Version November 2015 5

Hexagon Manufacturing Intelligence helps industrial manufacturers develop the disruptive technologies of today and the life-changing products of tomorrow. As a leading metrology and manufacturing solution specialist, our expertise in sensing, thinking and acting the collection, analysis and active use of measurement data gives our customers the confidence to increase production speed and accelerate productivity while enhancing product quality. Through a network of local service centres, production facilities and commercial operations across five continents, we are shaping smart change in manufacturing to build a world where quality drives productivity. For more information, visit HexagonMI.com. Hexagon Manufacturing Intelligence is part of Hexagon (Nasdaq Stockholm: HEXA B; hexagon.com), a leading global provider of information technologies that drive quality and productivity improvements across geospatial and industrial enterprise applications. COORDINATE MEASURING MACHINES 3D LASER SCANNING SENSORS PORTABLE MEASURING ARMS SERVICES LASER TRACKERS & STATIONS MULTISENSOR & OPTICAL SYSTEMS WHITE LIGHT SCANNERS METROLOGY SOFTWARE SOLUTIONS CAD / CAM STATISTICAL PROCESS & CONTROL AUTOMATED APPLICATIONS MICROMETERS, CALIPERS AND GAGES 2015 Hexagon Manufacturing Intelligence. Part of Hexagon All rights reserved. Due to continuing product development, Hexagon Manufacturing Intelligence reserves the right to change product specifications without prior notice. Version 25 November 2015