MPS65, MPS65, MPS, MPS, MPS65 and MPS are Preferred Devices Amplifier Transistors Features PbFree Packages are Available* MAXIMUM RATINGS Rating Symbol MPS65 MPS MPS65 MPS Unit Collector Emitter Voltage V CE 4 6 Vdc Collector Base Voltage V CB 6 8 Vdc Emitter Base Voltage V EB 5. Vdc Collector Current Continuous I C 2. Adc Total Power Dissipation @ T A = 25 C Derate above 25 C Total Power Dissipation @ T C = 25 C Derate above 25 C Operating and Storage Junction Temperature Range P D 625 5. P D.5 2 mw mw/ C W mw/ C T J, T stg 55 to +5 C Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 2 BASE COLLECTOR 3 EMITTER 2 BASE COLLECTOR 3 EMITTER MARKING DIAGRAM MPS xxx AYWW THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Thermal Resistance, JunctiontoAmbient Thermal Resistance, JunctiontoCase R JA 2 C/W R JC 83.3 C/W CASE 29 xxx A Y WW = Specific Device Code = Assembly Location = Year = Work Week *For additional information on our PbFree strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 5 of this data sheet. Preferred devices are recommended choices for future use and best overall value. Semiconductor Components Industries, LLC, 25 May, 25 Rev. 2 Publication Order Number: MPS65/D
MPS65, MPS65, MPS, MPS, ELECTRICAL CHARACTERISTICS (T C = 25 C unless otherwise noted) Characteristic Symbol Min Max Unit OFF CHARACTERISTICS Collector Emitter Breakdown Voltage (Note ) (I C = madc, I B = ) MPS65, MPS MPS65, MPS Collector Base Breakdown Voltage (I C = Adc, I E = ) MPS65, MPS MPS65, MPS Emitter Base Breakdown Voltage (I C =, I E = Adc) Collector Cutoff Current (V CB = 6 Vdc, I E = ) MPS65, MPS (V CB = 8 Vdc, I E = ) MPS65, MPS Emitter Cutoff Current (V EB = 4. V, I C = ) V (BR)CEO 4 6 V (BR)CBO 6 8 Vdc Vdc V (BR)EBO 5. Vdc I CBO.. Adc I EBO. Adc ON CHARACTERISTICS (Note ) DC Current Gain (I C = 5 ma, V CE = 2. V) (I C = 5 ma, V CE = 2. V) (I C =. A, V CE = 2. V) (I C = 2. A, V CE = 2. V) Collector Emitter Saturation Voltage (I C = 2. A, I B = 2 ma) (I C =. A, I B = ma) h FE 4 V CE(sat) BaseEmitter On Voltage (I C =. A, V CE = 2. V) V BE(on). Vdc Base Emitter Saturation Voltage (I C =. A, I B = ma) V BE(sat).2 Vdc SMALLSIGNAL CHARACTERISTICS CurrentGain Bandwidth Product (Note 2) (I C = 5 madc, V CE = 5. Vdc, f = MHz). Pulse Test: Pulse Width 3 s, Duty Cycle = 2.%. 2. f T is defined as the frequency at which h fe extrapolates to unity..5.3 Vdc f T MHz 2
MPS65, MPS65, MPS, MPS, h FE, DC CURRENT GAIN 3 27 24 2 8 5 2 9 6 3 T J = 25 C 25 C 55 C 2 5 2 5. A 2. A 4. A Figure. MPS65, MPS65 Typical DC Current Gain V CE = 2. V hfe, DC CURRENT GAIN 25 225 2 5 25 5 25 T J = 25 C 25 C 55 C 2 5 2 5. A 2. A 4. A Figure 2. MPS, MPS Typical DC Current Gain V CE = 2. V 2..8 2..8.6.6 V, VOLTAGE (VOLTS).4.2..8.6 V BE(sat) @ I C /I B = V BE(on) @ V CE = 2. V V, VOLTAGE (VOLTS).4.2..8.6 V BE(sat) @ I C /I B = V BE(on) @ V CE = 2. V.4.2 5 V CE(sat) @ I C /I B = 2 5. A 2. A 4. A.4.2 5 V CE(sat) @ I C /I B = 2 5. A 2. A 4. A Figure 3. MPS65, MPS65 On Voltages Figure 4. MPS, MPS On Voltages 3
MPS65, MPS65, MPS, MPS, V CE, COLLECTOREMITTER VOLTAGE (VOLTS)..9.8.7.6.5.4.3.2..5 T J = 25 C I C = ma I C = ma I C = 5 ma I C = 2. A..2.5. 2. 5. 2 5 2 5 I B, BASE CURRENT (ma) V CE, COLLECTOREMITTER VOLTAGE (VOLTS)..9.8.7.6.5.4.3.2. I C = ma I C = ma I C = 5 ma I B, BASE CURRENT (ma) T J = 25 C I C = 2. A.5..2.5. 2. 5. 2 5 2 5 Figure 5. MPS65, MPS65 Collector Saturation Region Figure 6. MPS, MPS Collector Saturation Region I C, COLLECTOR CURRENT 4. 2...5.2..5 T A = 25 C. ms MPS65 MPS65 T C = 25 C Figure 7. MPS65, MPS65 SOA, Safe Operating Area s WIRE LIMIT.2 THERMAL LIMIT SECOND BREAKDOWN LIMIT.. 2. 5. 2 5 V CE, COLLECTOREMITTER VOLTAGE (VOLTS) 4. 2...5.2. T A = 25 C. ms MPS MPS T C = 25 C s.5 WIRE LIMIT.2 THERMAL LIMIT SECOND BREAKDOWN LIMIT.. 2. 5. 2 5 V CE, COLLECTOREMITTER VOLTAGE (VOLTS) Figure 8. MPS, MPS SOA, Safe Operating Area 4
MPS65, MPS65, MPS, MPS, ORDERING INFORMATION Device Package Shipping MPS65 5 Units / Bulk MPS65G 5 Units / Bulk MPS65RLRA 2 / Tape & Reel MPS65RLRAG 2 / Tape & Reel MPS65ZL 2 / Tape & Ammunition MPS65ZLG 2 / Tape & Ammunition MPS65 5 Units / Bulk MPS65G 5 Units / Bulk MPS65RLRA 2 / Tape & Reel MPS65RLRAG MPS65RLRBG 2 / Tape & Reel 2 / Tape & Reel MPS65RLRM 2 / Tape & Ammunition MPS65RLRMG 2 / Tape & Ammunition MPS 5 Units / Bulk MPSG 5 Units / Bulk MPSRLRA 2 / Tape & Reel MPSRLRAG 2 / Tape & Reel MPSRLRP 2 / Tape & Ammunition MPSRLRPG 2 / Tape & Ammunition MPS 5 Units / Bulk MPSG 5 Units / Bulk MPSRLRA 2 / Tape & Reel MPSRLRAG 2 / Tape & Reel MPSRLRP 2 / Tape & Ammunition MPSRLRPG 2 / Tape & Ammunition MPSZL 2 / Tape & Ammunition MPSZLG 2 / Tape & Ammunition For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8/D. 5
MPS65, MPS65, MPS, MPS, PACKAGE DIMENSIONS (TO226) CASE 29 ISSUE AL SEATING PLANE R A X X H V G P N B L K C D J SECTION XX NOTES:. DIMENSIONING AND TOLERANCING PER ANSI Y4.5M, 982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. INCHES MILLIMETERS DIM MIN MAX MIN MAX A..25 4.45 5.2 B.7.2 4.32 5.33 C.25.65 3.8 4.9 D.6.2.47.533 G.45.55.5.39 H.95.5 2.42 2.66 J.5.2.39.5 K.5 2.7 L.25 6.35 N.8.5 2.4 2.66 P. 2.54 R.5 2.93 V.35 3.43 N ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 632, Phoenix, Arizona 858232 USA Phone: 4882977 or 8344386 Toll Free USA/Canada Fax: 48829779 or 83443867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 82829855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 29 Kamimeguro, Meguroku, Tokyo, Japan 535 Phone: 835773385 6 ON Semiconductor Website: Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. MPS65/D