CONCRETE SAW PARTS LIST MODEL CC Wisconsin Fuel Injected (April 0) Part # 00
WARNING The engine exhaust from this product Contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
Table of Contents Controls Legend.... Idler Assembly.... Quick Reference Service Filters / Belts Belt Guard Assembly Frame Upright Assembly.. Front Pointer Assembly Instrument Panel Assembly.. Notes........ Control Grip Assembly. 0 Blade Guard Assembly.., Control Lever Assembly (Eaton).. 0 Blade Guard Assembly.., Fuel Tank Assembly. Blade Guard Assembly.. 0, Battery Assembly. 0 Blade Guard Assembly.., Hydraulic Pump Assembly... Optional Water Pump Assembly.. Depth Indicator Assembly Optional Water Safety Switch Assembly. Depth Stop Assembly.. Optional Spot Light Assembly. Water Supply Assembly.. Optional Magnetic Spot Light Assembly. Air Intake Assembly. Shaft Tachometer Assembly.. Frame Base Assembly. 0 Optional Speed Metering Valve Assembly Hydraulic Cylinder Assembly Optional Parking Brake Assembly... 0, Rear Drive Assembly (Eaton).., Optional Blade Stacking Assembly.., Eaton Transmission Assembly.. Linkage Assembly Optional Blade Spacing Assembly, Optional Blade Spacing Assembly, Rear Axle Assembly (Eaton / Gear). Wiring Diagram, Front Axle Assembly Decal Group. 0 Blade Shaft Assembly.. Blade Speed Conversion Charts... Belt Drive Assembly. Notes....... Engine Assembly..... 0, Warranty...
Controls Legend Hour Meter Handle Lock Knobs Volt Meter Speed Control Lever Choke Control Lower Pushbutton Vernier Throttle Control Raise Pushbutton Ignition Switch Fuel Tank Cap Pre-Cleaner Transmission Engagement Lever Air Cleaner Restriction Indicator Water Safety Switch (Optional) Depth Stop Knob Spotlight Switch (Optional) Cutting Depth Indicator 0 Water Pump Switch (Optional) 0 Water Valve Lowering Speed Metering Valve (Optional) Emergency Stop Button 0 0 0
Quick Reference Service Filters / Belts DP Part No. Description Manufacturer's Part No. 0 Engine Oil Filter Wiscon #RV 00 Spark Plug () Champion #DJ 00 In-Line Fuel Tank Filter Wisconsin #TMF00 0 Outer Primary Air Filter Donaldson #P 0 Inner Safety Air Filter Donaldson #P 00 Blade Shaft Belt () Gates #/VX 00 Eaton Transmission Belt Gates #AX
Frame Upright Assembly #0 0 0 0
Frame Upright Assembly #0 00 Frame Upright Weldment 0000 Cap Screw, Hex Hd., /- x " 000 Flat Washer, /" SAE 000 Lock Nut, /- Nylon 000 Cap Screw, Hex Hd., /- x -/" 000 Flat Washer, /" SAE 000 Lock Nut, /- Nylon 000 Handle Bar, " Long 00 Handle Grip 0 000 Hand Lock Knob, /- x -/" 00 Wrench, /" Combination 0 Plug, /" Hole 00 Plug, /" Hole 000 Grommet, /" I.D. 00 Serial Number Plate, US 000 Rivet, /" Dia. 00 Serial Number Plate, CE 00 Rivet, /" Dia. 0 Cable Cleat 0 00 Tap Screw, Flat Hd., #0- x " 00 Rear Cover Screen 000 Cap Screw, Hex Flange Hd., /-0 x "
Instrument Panel Assembly Fuel Injected #00 0 0
Instrument Panel Assembly Fuel Injected #00 I TEM PART NO. QTY DESCRIPTIO N 00 Frame Upright Weldment 00 Gauge Panel CC00 FI 00 Volt Meter 000 Ignition Switch 00 Hydraulic Pump Cover Plate 00 Emergency Stop Button 00 Contact Block, N.C. 000 Tap Screw, Pan Hd., #0- x /" 000 Switch Plate 0 000 Plug, /" Hole 00 Tap Screw, Flat Hd., #0- x /" 00 Plug, /" Hole 00 Edge Trim 00 Fuse Panel, Circuit 00 Fuse, 0 Amp Red ATO/ATC 00 Cap Screw, Soc. Hd., #0- x " 000 Lock Nut, #0- Nylon 00 Wisconsin VE0 Control 00 Malfunction Indicator Lamp 0 00 Wisconsin FI ECU 00 Wisconsin FI Fuse Box 0000 Flat Washer, /" SAE 000 Cap Screw, Hex Hd., /-0 x -/" 0000 Lock Nut, /-0 Nylon 000 Flat Washer, /" SAE 000 Lock Nut, /- Nylon 00 Cap Screw, Hex Hd., /- x "
Control Grip Assembly #00 0 00 Control Grip Body 0 Control Grip Cover 00 Plug, Rectangular 00 Plug, /" Hole 00 Pushbutton Switch, Raise 00 Pushbutton Switch, Lower 00 Set Screw, Soc. Hd., M x mm 00 Machine Screw, Oval Hd., # x /" 00 Harness, Hydraulic Pump
Control Lever Assembly #0 (Eaton) 0 ITEM PART NO. QTY DESCRIPTION 00 Lever Support Weldment 00 Cap Screw, Hex Hd., /-0 x /" 000 Lock Washer, /" Split 0000 Flat Washer, /" SAE 0000 Lock Nut, /-0 Nylon 000 Friction Spacer 00 Jam Nut, /- 0 Speed Control Lever 00 Friction Washer, /" 0 00 Flat Washer, /" USS 00 Belleville Washer, /" 00 Cap Screw, Hex Flange Hd.,/- x -/" 000 Engagement Lever Weldment 0000 Lever Grip 000 Cap Screw, Hex Flange Hd., /- x -/" 000 Gate Plate 00 Control Grip Assembly
0 CC00 FUEL TANK ASSEMBLY, FUEL INJECTION DETAIL D SCALE : ATTACH FUEL INJECTOR HOSES FROM ENGINE DETAIL A SCALE : TO "T" IN AIR INTAKE ASSY. SEE 00. 0 DETAIL C SCALE : 0 DETAIL B SCALE :
0 FUEL TANK ASSEMBLY, FUEL INJECTION 0 DETAIL E SCALE : ITEMS 00, 00-, 0- ARE INCLUDED WITH ENGINE 00. ITEM PART NO. Default/Q TY. DESCRIPTION 0 Fuel Tank,. Gallon 00 Fuel Tank Mount Bar 000 Cap Screw, Hex Hd., /- x /" 00 Cap Screw, Hex Hd., /- x " 000 Lock Washer, /" Split 000 Flat Washer, /" SAE 0 Grommet 0 Roll Over Vent, /" Hose Barb 000 Fuel Tank Grommet 0 0 Fuel Tank Cap, W/Gage 00 Fuel/Vent Line, x " 000 Ball Valve, /" NPT 000 Elbow, /" M. Pipe to /" M. JIC 000 Fitting, /" F. JIC to /" Push Lock 0 Fuel Filter Clamp 00 Fuel Filter FI Wisconsin ITEM PART NO. Default/Q TY. DESCRIPTION 00 Fuel Line /" ID x " 00 Fuel Line Hose /" ID x " 0 Fuel pump clamp FI CC00 0 0 Fuel Pump Sleeve FI CC00 00 Fuel Pump FI CC00 0 Fitting M0 to J0 0 Straight SAE J0 Fitting 0 0 Deg SAE J0 Fitting 0 PWM Assembly FI CC 00 00 Fuel Line /" ID x " 0000 Pipe Tee, /" FPT 00 Hex Nut, /- 00 Cap Screw, Hex Hd., /- x -/" 0 00 Fuel Line /" ID x " 00 U-Bolt, /" Pipe 0000 Flat Washer, /" SAE 0000 Lock Nut, /-0 Nylon 0 Decal, EPA EVAP Standard
Battery Assembly #0 0 0 0 000 Battery Platform 00 Battery Support Brace 000 Cap Screw, Hex Hd., /- x /" 000 Flat Washer, /" SAE 000 Lock Nut, /- Nylon 000 Lock Washer, /" Split 000 Battery Top Brace 000 Rod, /-0 x -/" 0000 Lock Nut, /-0 Nylon 0 000 Battery Pad 000 Battery, Volt Group Size 000 Battery Cable, Positive (Red) 000 Battery Cable, Negative (Black) 000 Battery Cable, " Positive (Red) 00 Battery Cable, " Negative (Black) 00 Battery Boot, Large (Red) 00 Battery Boot, Large (Black) 00 Battery Boot, Small (Red) 00 Battery Boot, Small (Black) 0 000 Flat Washer, /" SAE 0000 Lock Washer, /" Split 00 Cap Screw, Hex Hd., /- x /"
Hydraulic Pump Assembly #00 (Includes Items # - #) 0 0 0000 Hydraulic Pump Unit 00 Breather Cap 000 Pipe Coupling, /" NPT 00 Pipe Nipple, /" NPT x " 00 Elbow, /" O-Ring to /" F. Pipe 0000 Hex Nipple, /" NPT 000 Flow Control Valve, /" NPT 000 Elbow, /" M. Pipe to /" M. JIC 000 Flat Washer, /" SAE 0 0000 Lock Washer, /" Split 0000 Cap Screw, Hex Hd., /- x " 00 Elbow, /" O-Ring to /" M. JIC 000 Fitting, /" F. JIC to /" Push Lock 000 Clear Hose, /" I.D. x "
Depth Indicator Assembly #00 0 000 Depth Indicator Mount Bracket 00 Cable Pulley, -/" 0000 Cap Screw, Hex Hd., /-0 x " 0000 Lock Nut, /-0 Nylon 00 Cap Screw, Hex Hd., /-0 x /" 00 Flange Bearing, /" 000 Flat Washer, /" SAE 000 Depth Indicator Pointer 000 Cap Screw, Hex Hd., /- x -/" 0 000 Cable Pulley, " 000 Lock Nut, /- Nylon 000 Depth Indicator Cable with Crimp, " 00 Spring, /" x " 000 Cotter Pin, /" x " 00 Cable Clamp
Depth Stop Assembly #00 0 000 Depth Stop Weldment 00 Belleville Washer, /" 000 Flat Washer, /" SAE 00 Friction Washer, /" 000 Depth Stop Knob 00 Roll Pin, /" x -/" 00 Yoke, /- 000 Lock Washer, /" Split 000 Hex Nut, /- 0 0000 Clevis Pin, /" Dia. x -/" 0000 Cotter Pin, /" x "
Water Supply Assembly #0 0 000 Water Supply Tube 000 Pipe Tee, /" NPT 0000 Close Nipple, /" NPT 000 Fitting, /" F. Pipe to /" F. Garden 000 Hose Filter Washer 000 Street Elbow, /" NPT 000 Water Valve 00 Fitting, /" M. Pipe to /" M. Garden 00 Water Hose Assembly, 0" Long 0 00 Street Elbow, /" NPT Steel 0000 Plug, /" NPT 00 U-Bolt, /" Pipe 0000 Flat Washer, /" SAE 0000 Lock Nut, /-0 Nylon
00 AIR INTAKE ASSEMBLY: FUEL INJECTED 0 0 TO FUEL TANK VENT LINE. 0 0 - Outer Primary Filter 0 - Inner Safety Filter 0 - Rubber Dust Ejector Boot CUT EXISTING /" AIR LINE FROM ENGINE, INSERT "T". ITEMS 00 & 0 ARE INCLUDED WITH ENGINE 00 00 Air Cleaner Complete 00 Pre-Cleaner with Clamp 00 Restriction Indicator 00 Close Nipple, /" NPT 00 Mounting Band, Polymer 00 Cap Screw, Hex Hd., /- x -/" 000 Flat Washer, /" SAE 000 Lock Nut, /- Nylon 00 Air Intake Hose Engine 0 000 Hose Clamp # 00 Air Temp Housing Weldment 00 Hose Elbow "ID 0 Degree 0 Air Temp Sensor FI CC00 000 Tee, / MPT x / FPT 00 Fitting, /" M. Pipe to /" Hose Barb 00 Fitting, / FPT to / Hose Barb
Frame Base Assembly #0 000A Frame Base 00 Skid Plate 00 Flat Washer, /" USS 0000 Lock Washer, /" Split 00 Cap Screw, Hex Hd., /- x /" 0000 Cap Screw, Hex Hd., /- x " 000 Rear Pointer 000 Cap Screw, Hex Hd., /- x -/" 0
Hydraulic Cylinder Assembly #00 00 Hydraulic Cylinder 000 Cylinder Pin, " 00 Cylinder Pin, -/" 000 Hair Pin Cotter, /" 000 Cylinder Breather, /" NPT 000 Elbow, /" M. Pipe to /" M. JIC 000 Hose Assembly, " Long
Rear Drive Assembly #0 (Eaton) 0 0 0 0 0
Rear Drive Assembly #0 (Eaton) 000 Transmission Platform Weldment 000 Mount Foot, Right Hand 00 Mount Foot, Adjustable 00 Pillow Block Bearing, /" 0000 Cap Screw, Hex Hd., /- x " 0000 Lock Washer, /" Split 0 Transmission Jackshaft Assembly 0 Key, /" Sq. x -/" 00 Sprocket, #0 x Tooth 0 00 QD Bushing, SDS x /" w/fasteners 000 Chain, #0 x Pitch 00 Chain Guard 0000 Flat Washer, /" SAE 000 Lock Washer, /" Split 000 Cap Screw, Hex Hd., /-0 x /" 00 Gear Guard 000 Set Screw, Sq. Hd., /- x -/" 00 Hex Nut, /- 000 Cap Screw, Hex Hd., /- x " 0 000 Flat Washer, /" SAE 000 Lock Nut, /- Nylon 00 Tap Bolt, Hex Hd., /- x -/" 00 Fan Guard 00 Cap Screw, Hex Hd., /-0 x /" 0000 Lock Nut, /-0 Nylon 0 Eaton Transmission Assembly 0 Linkage Assembly 0 Gear Jackshaft 0 Spur Gear, Tooth 0 0 Key, /" Sq. x -/" 00 Fender Washer, /" x " 000 Lock Washer, /" Split 000 Cap Screw, Hex Hd., /- x "
Eaton Transmission Assembly #0 0 0 0 000 Eaton Hydrostatic Transmission 000 Fitting, /" F. JIC to /" Push Lock 0000 Oil Recirculation Hose, /" I.D. x " 00 Woodruff Key #, /" x /" 000 Woodruff Key #0, /" x /" 000 Sprocket, #0 x Tooth w/setscrews 000 Fender Washer, /" x -/" 000 Lock Washer, /" Split 000 Cap Screw, Hex Hd., /-0 x /" 0 000 Shift Lever 000 Flat Washer, /" SAE 000 Lock Nut, /- Nylon 0 Transmission Pulley 0" w/setscrew 00 Cooling Fan, " 000 Lock Washer, #0 Split 00 Machine Screw, Hex Hd., #0- x /" 00 Flat Washer, /" USS 000 Lock Washer, /" Split 000 Cap Screw, Hex Hd., /- x /" 0 000 Cap Screw, Hex Hd., /- x " 000 Flat Washer, /" SAE 000 Lock Nut, /- Nylon 000 Hose Clamp # 000 Clear Hose, /" I.D. x "
Linkage Assembly #0 0 0 ITEM PART NO. QTY DESCRIPTION 00 Extension Bar 000 Cap Screw, Hex Hd., /- x -/" 000 Lock Nut, /- Nylon 00 Bell Crank 00 Friction Washer, /" 000 Cap Screw, Hex Hd., /- x -/" 000 Flat Washer, /" SAE 000 Cap Screw, Hex Hd., /- x -/" 0000 Lock Washer, /" Split 0 000 Hex Nut, /- 0 Linkage Assembly -/" 00 Linkage Assembly 0-/"
Rear Axle Assembly #00 (Eaton / Gear) 0 00 Rear Axle Weldment w/ Tooth Gear 00 Pillow Block Bearing -/" 000 Rear Axle Bearing Spacer, /" 000 Flat Washer, /" SAE 000 Lock Washer, /" Split 00 Cap Screw, Hex Hd., /- x -/" 0 Key, /" Sq. x -/" 00 Wheel, " Rear 000 Wheel Mount Washer 0 000 Lock Washer, /" Split 000 Cap Screw, Hex Hd., /- x /"
Front Axle Assembly #000 0 000 Front Axle Weldment 00 Wheel, " Front 00 Flat Washer, " SAE 0000 Set Collar, " ID 00 Set Screw, Sq. Hd., /- x /" 00 Pillow Block Bearing -/" 000 Flat Washer, /" SAE 000 Lock Washer, /" Split 000 Cap Screw, Hex Hd., /- x -/" 0 00 Grease Fitting, /" NPT x degree
Blade Shaft Assembly #0 * 0 FOR LH THREADED BOLTS ONLY * NOTE 00 FOR RH THREADED BOLTS ONLY * "." ITEM PART NO. QTY DESCRIPTION 0 000 Blade Shaft 00 Blade Shaft Bearing, -/" 00 Grease Fitting, /" NPT x -/" 00 Key, /" Sq. x -/" 0000 Key, /" Sq. x /" 00 Set Screw, Soc. Hd., /- x /" 0000 Flat Washer, /" SAE 00 Lock Washer, /" Split 00 Cap Screw, Hex Hd., /- x -/" 0 00 Cap Screw, Hex Hd., /- x " 000 Cap Screw, Hex Hd., /- x " LH 00 Inner Flange " 00 Outer Flange " with Pin 00 Dowel Pin, /" Dia. x " 00 Lock Washer, Wedge /" 0 Lock Washer, Wedge /" LH * See Note * See Note
Belt Drive Assembly #0 " & 0" BLADE DRIVE ITEM PART NO. QTY DESCRIPTION 00 Pulley, Accessory Drive 00 Key, /" Sq. x -/" Bevel End 00 0 Set Screw, Soc. Hd., /- x /" 00 V-Belt, AX 000 Sheave,." x Groove x -/" Bore 000 Sheave,." x Groove x -/" Bore 00 Banded Belt, /VX - Strand " & 0" BLADE DRIVE ITEM PART NO. QTY DESCRIPTION 00 Pulley, Accessory Drive 00 Key, /" Sq. x -/" Bevel End 00 0 Set Screw, Soc. Hd., /- x /" 00 V-Belt, AX 00 Sheave,." x Groove x -/" Bore 000 Sheave,." x Groove x -/" Bore 00 Banded Belt, /VX - Strand
Engine Assembly Fuel Injected #000 0 0 0
Engine Assembly Fuel Injected #000 000 Throttle Cable Clamp 000 Rivet, /" Dia. 000 Engine Base Weldment 00 Cap Screw, Hex Hd., /- x -/" 000 Flat Washer, /" SAE 000 Lock Nut, /- Nylon 000 Tap Bolt, Hex Hd., /- x " 00 Hex Nut, /- 00 Swivel Pad Nut, /- 0 00 Frame Lift 000 Frame Lift Brace 00 Flat Washer, /" USS 00 Cap Screw, Hex Hd., /- x -/" 000 Cap Screw, Hex Hd., /- x " 00 Cap Screw, Button Hd., /- x " 000 Cap Screw, Hex Hd., /- x -/" 0000 Cap Screw, Hex Hd., /- x " 000 Lock Nut, /- Nylon 00 Oil Drain Hose Assembly 0 00 HP FI Wisconsin Engine 0 O Sensor for muffler/cat 0 Muffler/CAT for FI CC00 000 Flat Washer, /" SAE 000 Lock Washer, /" Split 000 Lock Nut, /- Nylon 00 Cap Screw, Hex Hd., /- x " 00 Fitting, /" M. Pipe to /" Push Lock 00 Oil Drain Hose, /" I.D. x " 00 Fitting, /" F. Pipe to /" Push Lock 00 Pipe Plug, /" NPT
Idler Assembly #00 ITEM PART NO. QTY DESCRIPTION 0 Idler Arm 000 Idler Pulley " 0000 Lock Washer, /" Split 000 Cap Screw, Hex Hd., /- x -/" 00 Tap Bolt, Hex Hd., /- x -/" 000 Lock Nut, /- Nylon 000 Hex Nut, /- 00 Spring, /" x -/" 000 Cotter Pin, /" x "
Belt Guard Assembly #0 0 ITEM PART NO. QTY DESCRIPTION 00A Belt Guard Weldment 00 Guard Mounting Tab, /- 00 Flat Washer, /" USS 0000 Lock Washer, /" Split 0000 Cap Screw, Hex Hd., /- x " 000 Flat Washer, /" SAE 000 Lock Washer, /" Split 000 Cap Screw, Hex Hd., /- x /" 00 Shaft/Flange Guard (Narrow) 0 000 Wing Screw, M x mm 00 Lock Pin with Ring
Front Pointer Assembly #00 0 0 00 Front Pointer Frame 0 Front Pointer Arm 0000 Front Pointer Rod 000 Pointer Cap 00 Wheel, " 0000 Set Collar, /" with Set Screw 000 Cap Screw, Hex Hd., /- x -/" 000 Lock Nut, /- Nylon 0000 Cap Screw, Hex Hd., /- x " 0 000 Hex Nut, /- 000 Cap Screw, Hex Hd., /- x -/" 0 Pointer Lanyard
Notes
" Blade Guard Assembly #000 0 0 0
" Blade Guard Assembly #000 000 " Blade Guard Front & Rear Only 000 Splash Flap 000 Cap Screw, Hex Hd., M-.0 x 0mm 0 Flat Washer, M 000 Fender Washer, /" x -/" 000 Lock Nut, M-.0 Nylon Insert 00 Water Manifold 000 Water Manifold Gasket 0 Cap Screw, Hex Hd., M-.0 x 0mm 0 0000 Plug, /" NPT 0000 Fitting, /" M. Pipe to /" M. Garden 00 Lanyard with Lock Pin 0 Water Tube for " Guard 0 Water Tube Clamp 000 Cap Screw, Flat Hd., M-.0 x mm 0000 Warning Label 0A Blade Guard Size Tag 00 Rivet, /" Dia. 000 Label, Wedge Locking Washer 0 00 Hinge Assembly 000 Blade Guard Hinge 000 Cap Screw, Hex Hd., M-.0 x 0mm 0 Flat Washer, M 000 Lock Nut, M-.0 Nylon Insert 00 Cap Screw, Hex Hd., M-.0 x mm
0" Blade Guard Assembly #00 0 0 0
0" Blade Guard Assembly #00 000 0" Blade Guard Front & Rear Only 000 Splash Flap 000 Cap Screw, Hex Hd., M-.0 x 0mm 0 Flat Washer, M 000 Fender Washer, /" x -/" 000 Lock Nut, M-.0 Nylon Insert 00 Water Manifold 000 Water Manifold Gasket 0 Cap Screw, Hex Hd., M-.0 x 0mm 0 0000 Plug, /" NPT 0000 Fitting, /" M. Pipe to /" M. Garden 00 Lanyard with Lock Pin 000 Water Tube for 0" Guard 0 Water Tube Clamp 000 Cap Screw, Flat Hd., M-.0 x mm 0000 Warning Label 0 0D 00 000 00 Blade Guard Size Tag Rivet, /" Dia. Label, Wedge Locking Washer Hinge Assembly 000 Blade Guard Hinge 000 Cap Screw, Hex Hd., M-.0 x 0mm 0 Flat Washer, M 000 Lock Nut, M-.0 Nylon Insert
" Blade Guard Assembly #00 0 0 0
" Blade Guard Assembly #00 00 " Blade Guard Front & Rear Only 000 Splash Flap 000 Cap Screw, Hex Hd., M-.0 x 0mm 0 Flat Washer, M 000 Fender Washer, /" x -/" 000 Lock Nut, M-.0 Nylon Insert 00 Water Manifold 000 Water Manifold Gasket 00 Lock Washer, M Split 0 0 Cap Screw, Hex Hd., M-.0 x 0mm 0000 Plug, /" NPT 0000 Fitting, /" M. Pipe to /" M. Garden 00 Lanyard with Lock Pin 000 Water Tube for " Guard 0 Water Tube Clamp 000 Cap Screw, Flat Hd., M-.0 x mm 0000 Warning Label 0F Blade Guard Size Tag 00 Rivet, /" Dia. 0 000 Label, Wedge Locking Washer 00 Universal Hinge Assembly ITEM PART NO. QTY DESCRIPTION 00 Hinge Weldment, Universal 00 Cap Screw, Hex Hd., /-0 x " 00 Lock Nut, /-0 Nylon 0 Flat Washer, M0 00 Lock Washer, M0 Split 00 Cap Screw, Hex Hd., M0-. x mm 0 Detent Pin, /" x " Grip
0 0" Blade Guard Assembly #00 (Includes Items # - #) 0 0
0" Blade Guard Assembly #00 (Includes Items # - #) ITEM PART NO. QTY DESCRIPTION 00 0" Blade Guard Front & Rear Only 000 Splash Flap 000 Cap Screw, Hex Hd., M-.0 x 0mm 0 Flat Washer, M 000 Fender Washer, /" x -/" 000 Lock Nut, M-.0 Nylon Insert 00 Water Manifold 000 Water Manifold Gasket 00 Lock Washer, M Split 0 0 Cap Screw, Hex Hd., M-.0 x 0mm 0000 Plug, /" NPT 0000 Fitting, /" M. Pipe to /" M. Garden 00 Lanyard with Lock Pin 000 Water Tube for 0" Guard 0 Water Tube Clamp 000 Cap Screw, Flat Hd., M-.0 x mm 0000 Warning Label 0 0G 00 00 000 00 0 00 00 Blade Guard Size Tag Rivet, /" Dia. Universal Hinge Assembly Label, Wedge Locking Washer Blade Guard Brace Flat Washer, M0 Lock Washer, M0 Split Cap Screw, Hex Hd., M0-. x mm ITEM PART NO. QTY DESCRIPTION 00 Hinge Weldment, Universal 00 Cap Screw, Hex Hd., /-0 x " 00 Lock Nut, /-0 Nylon 0 Flat Washer, M0 0 00 Lock Washer, M0 Split 00 Cap Screw, Hex Hd., M0-. x mm 0 Detent Pin, /" x " Grip
Optional Water Pump Assembly #00 0 0000 Water Pump, V Diaphragm 0000 Cap Screw, Hex Hd., /-0 x " 0000 Flat Washer, /" SAE 0000 Lock Nut, /-0 Nylon 0 Port Fitting, /" Barb x 0 Degree 000 Hose Clamp # 000 Hose Assembly, Foot 000 Hose Assembly, Foot 000 Toggle Switch 0 000 Switch Boot
Optional Water Safety Switch Assembly #0 ITEM PART NO. QTY DESCRIPTION 0000 Water Pressure Safety Switch 000 Toggle Switch On/Off 000 Switch Boot
Optional Spot Light Assembly #00 00 Spot Light, Volt 000 Light Bar 000 Light Bar Mount Bracket 00 Hand Lock Knob, /- x " 00 Cap Screw, Hex Hd., /-0 x /" 0000 Lock Nut, /-0 Nylon 000 Toggle Switch 000 Switch Boot
Optional Magentic Spot Light Assembly #00 00 Light, V Magnetic Base 00 Outlet, Volt Power 00 Cap, Volt Power Outlet 000 Toggle Switch 000 Switch Boot
Shaft Tachometer Assembly #00 0 0 I TEM P ART NO. QTY. DESCRIPTIO N 00 Blade RPM Decal 00 Tach/Hour Meter (VDO) Calibrated 00 Tach Sensor Wire Harness 0 Shaft Tach Gear Assembly 00 Gauge Panel CC00 FI I TEM PART NO. QTY DESCRIPTIO N 000 Shaft Tach Gear, Split 00 Shaft Tach Gear Guard 00 Magnetic Sensor w/jam Nut 00 Lock Washer, /" Split 0 0 Seal, -/" V-Ring 000 Flat Washer, /" SAE 000 Lock Nut, /- Nylon 00 Cap Screw, Hex Hd., /- x -/" 000 Lock Washer, /" Split 00 Cap Screw, Hex Hd., /- x "
Optional Lowering Speed Metering Valve Assembly #00 00 Valve, /" Metering 00 Panel Mounting Kit 000 Elbow, /" M. Pipe to /" M. JIC 00 Elbow, /" O-Ring to /" F. Pipe 00 Tee, /" M. JIC to /" M. Pipe 00 Adapter, /" M. Pipe to /" F. JIC 00 Check Valve 00 Hose Assembly, " Long 00 Hose Assembly, 0" Long
Optional Parking Brake Assembly #0 0 0 0
Optional Parking Brake Assembly #0 0 Bearing Housing Bar 0 Ball Bearing, /" x -/" x /" 00 Pivot Pin 0 Key, /" Sq. x -/" 0 Pivot Arm 000 Fender Washer, /" x -/" 000 Lock Washer, /" Split 000 Cap Screw, Hex Hd., /-0 x /" 0 Brake Lever 0 00 Flat Washer, /" USS 00 Belleville Washer, /" 0000 Cap Screw, Hex Hd., /- x " 0 Friction Washer, /" x -/" x /" 00 T-Bolt, /- 000 Hex Nut, /- 000 Flat Washer, /" SAE 0000 Lock Washer, /" Split 00 Cap Screw, Hex Hd., /- x /" 0 Lever Gate 0 0000 Lever Grip 000 Flat Washer, /" SAE 000 Cap Screw, Hex Hd., /- x /" 000 Lock Nut, /- Nylon
Optional Blade Stacking Assembly #000 (Up to -/" width) 0 0 0
Optional Blade Stacking Assembly #000 (Up to -/" width) 00 Outer Flange -/" with Pin 0000 Flat Washer, /" SAE 00 Lock Washer, /" Split 000 Cap Screw, Hex Hd., /"- x " LH 000 0" Wide Blade Guard Assembly 00 0" Wide Blade Guard Front & Rear Only 00 Splash Flap 0000 Cap Screw, Hex Hd., /-0 x " 0000 Flat Washer, /" SAE 0 000 Fender Washer, /" x -/" 0000 Lock Nut, /-0 Nylon 00 Water Manifold 00 Water Manifold Gasket 00 Cap Screw, Hex Hd., /-0 x " 0000 Plug, /" NPT 0000 Fitting, /" M. Pipe to /" M. Garden 00 Lanyard with Lock Pin 000 Water Tube for 0" Guard 0 Water Tube Clamp 0 0000 Cap Screw, Flat Hd., /-0 x /" 000 Nozzle, /" NPT 0000 Warning Label 00 Hinge Assembly for 0" Guard
Optional Blade Spacing Assembly #00 (Up to " width) 0 0 0
Optional Blade Spacing Assembly #00 (Up to " width) 00 Blade Shaft Extension, Left Hand Thread 00 Outer Flange -/" 00 Dowel Pin, /" Dia. x -/" 00 Hex Nut, "- Left Hand 000 0" Wide Blade Guard Assembly 00 0" Wide Blade Guard Front & Rear Only 00 Splash Flap 0000 Cap Screw, Hex Hd., /-0 x " 0000 Flat Washer, /" SAE 0 000 Fender Washer, /" x -/" 0000 Lock Nut, /-0 Nylon 00 Water Manifold 00 Water Manifold Gasket 00 Cap Screw, Hex Hd., /-0 x " 0000 Plug, /" NPT 0000 Fitting, /" M. Pipe to /" M. Garden 00 Lanyard with Lock Pin 000 Water Tube for 0" Guard 0 Water Tube Clamp 0 0000 Cap Screw, Flat Hd., /-0 x /" 000 Nozzle, /" NPT 0000 Warning Label 00 Hinge Assembly for 0" Guard
Optional Blade Spacing Assembly #00 (Up to " width) 0 0
Optional Blade Spacing Assembly #00 (Up to " width) 000 Blade Shaft Extension, Left Hand Thread 00 Outer Flange -/" 00 Drive Pin, /" Dia. x " 00 Hex Nut, "- Left Hand 00 0" Wide Blade Guard Assembly 00 0" Wide Blade Guard Front & Rear Only 00 Splash Flap 0000 Cap Screw, Hex Hd., /-0 x " 0000 Flat Washer, /" SAE 0 000 Fender Washer, /" x -/" 0000 Lock Nut, /-0 Nylon 0 Water Manifold 00 Water Manifold Gasket 00 Cap Screw, Hex Hd., /-0 x " 0000 Plug, /" NPT 0000 Fitting, /" M. Pipe to /" M. Garden 00 Lanyard with Lock Pin 000 Water Tube for 0" Guard 0 Water Tube Clamp 0 0000 Cap Screw, Flat Hd., /-0 x /" 000 Nozzle, /" NPT 0000 Warning Label 00 Hinge Assembly for 0" Guard 00 Hose Assembly, Dual Inlet
Wiring Diagram Diagram Number Part No. Qty. Req. Description Diagram Number Part No. Qty. Req. Description 000 Engine Harness (Includes #) 00 Volt Meter 00 Control Panel Harness (Includes #) 000 Hour Meter 00 Relay Harness 0 00 Optional Tach/Hour Meter (VDO) Calibrated 00 Hydraulic Pump Harness 00 (Light Socket) 000 Battery Cable, Positive (Red) 00 (Light Bulb, Wedge Base) 000 Battery Cable, Negative (Black) 00 Optional Magnetic Sensor (Includes #) 000 Solenoid Cable, Positive (Red) 00 Optional Tach Sensor Harness 00 Ground Cable, Negative (Black) (Includes # & #) 000 Battery, Volt 00 Optional Connector, Wire Shroud 0 0000 Hydraulic Pump Unit (Includes # and #) 00 Male Terminal, / Gage Wire 00 Solenoid, Motor 00 Cable Seal, Gray 00 Valve Coil 00 Optional Connector, Wire Tower 00 Valve Stem 00 Female Terminal, / Gage Wire 00 Pushbutton Switch, Raise 00 Cable Seal, Gray 00 Pushbutton Switch, Lower 000 Connector, Wire Shroud 000 Ignition Coil 00 Male Terminal, / Gage Wire 0 Distributor for HP Engine 00 Male Terminal, Gage Wire 0 Distributor for HP Engine 00 Cable Seal, Gray 00 High Temperature Safety Switch 00 Cable Seal, Blue 0 Flywheel Alternator, 0 Amp 00 Connector, Wire Tower 00 Rectifier/Regulator Module 00 Female Terminal, / Gage Wire 0 00 Starting Motor (Includes #) 00 Female Terminal, Gage Wire 00 Solenoid Switch 00 Cable Seal, Gray 00 Vacuum Switch 00 Cable Seal, Blue 000 Ignition Switch 000 Optional Toggle Switch 00 Circuit Breaker, Amp 000 Switch Boot 00 Circuit Breaker Boot, Red 0000 Optional Water Pressure Safety Switch 00 Relay 00 Optional Spot Light, Volt 00 Relay Connector 0 00 Optional Magnetic Base Light, Volt 00 Wire Terminal, /" Push-on 00 Optional Power Outlet, Volt 00 Emergency Stop Button 00 Outlet Cap 00 Contact Block N.C. 0000 Optional Water Pump, Diaphragm 00 Fuse Panel, Circuit 000 Anti-Diesel Solenoid Valve 00 Fuse, 0 Amp Red ATO/ATC for HP Engine Only
Decal Group CORE CUT DECAL INSTRUMENT PANEL DECAL #00 (Qty. ) #00 RPM CHART DECAL WARNING DECAL #00 #0000 0 SAW LABELS SHEET #00
Blade Speed Conversion Charts WARNING: Do not exceed blade speed (RPM) shown for each blade size. Excessive blade speed could result in blade breakage and serious personal injury! Blade Size Blade Shaft Engine Max. Depth of Cut No Load RPM Sheave Size No Load RPM Sheave Size ",000.",000." -/" 0",00.",00." -/" ",00.",00." 0-/" 0",0.",00." -/" WARNING: When changing blade size, use chart shown below for selecting items that must be changed. Model CC " 0" " 0" Blade Guard Assembly 0000 000 000 000 Engine Sheave, -/" Bore (Sheave Size) 000 (.") 000 (.") 00 (.") 00 (.") Blade Shaft Sheave, -/" Bore (Sheave Size) 000 (.") 000 (.") 000 (.") 000 (.")
Notes
Notes
EQUIPMENT AND PARTS WARRANTY Diamond Products warrants all equipment manufactured by it against defects in workmanship or materials for a period of one () year from the date of shipment to Customer. The responsibility of Diamond Products under this Warranty is limited to replacement or repair of defective parts at Diamond Products Elyria, Ohio factory, or at a point designated by it, of such parts as shall appear to us upon inspection at such parts, to have been defective in material or workmanship, with expense for transportation and labor borne by Customer. In no event shall Diamond Products be liable for consequential or incidental damages arising out of the failure of any Product to operate properly. Integral units such as engines, electric motors, batteries, transmissions, etc., are excluded from this Warranty and are subject to the prime manufacturer s warranty. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, AND ALL SUCH OTHER WARRANTIES ARE HEREBY DISCLAIMED. Printed in U.S.A. Prospect Street, Elyria, Ohio 0 (0) - (00) - Fax (0) - www.diamondproducts.com