Laser Systems for Patient Alignment

Laser Systems for Patient Alignment

New Laser Technologies for Virtual Simulation

CONTENTS CARINAsim and ARGO NAVIS CARINAsim for DORADO systems CARINAsim workflow solutions Relative Marking Absolute Marking Reference Marking Summary PICTOR 3D

CARINAsim SOFTWARE FOR PATIENT MARKING AND VIRTUAL SIMULATION CARINAsim and ARGO NAVIS

CARINAsim AND ARGO NAVIS CARINAsim is an integral part of the workflow management platform ARGO NAVIS

CARINAsim FOR DORADO AND PICTOR 3D One Look and Feel Two Software Packages CARINAsim for DORADO CARINAsim for PICTOR 3D

CARINAsim SOFTWARE FOR PATIENT MARKING AND VIRTUAL SIMULATION CARINAsim for DORADO systems

CARINAsim FOR DORADO SYSTEMS Patient marking dialog Patient data field Patient view Room view Coordinate axes Laser controller Beam list

CARINAsim FOR DORADO SYSTEMS Single Touch Control Laser axis Laser motion speed Room view Absolute laser position

CARINAsim WORKFLOW SOLUTIONS One Software Customized Workflows Relative Marking Absolute Marking Reference Marking

CARINAsim WORKFLOW SOLUTIONS RELATIVE MARKING

RELATIVE MARKING CARINAsim workflow with Relative Marking

RELATIVE MARKING CARINAsim workflow with Relative Marking

RELATIVE MARKING CARINAsim workflow with Relative Marking

RELATIVE MARKING Patient re-positioning for treatment Aligning isocenter marks to the Linac room coordinate system via room lasers

CARINAsim WORKFLOW SOLUTIONS ABSOLUTE MARKING

ABSOLUTE MARKING CARINAsim workflow with Absolute Marking

ABSOLUTE MARKING Patient re-positioning for treatment Aligning isocenter marks to the Linac room coordinate system via room lasers

CARINAsim WORKFLOW SOLUTIONS REFERENCE MARKING

REFERENCE MARKING CARINAsim workflow with Reference Marking

REFERENCE MARKING Applying the shift at the linac table

KEY FEATURES OF CARINAsim Customized Workflow Support Relative Marking Absolute Marking Reference Point Marking DICOM RT Interface 3D Patient View Patient Depending Reference Point Capture of Reference Point Single Touch Interface All in One Solution

PICTOR 3D

PICTOR 3D KEY FEATURES The Paradigm Shift in Patient Marking Easy and accurate patient marking Timesaving Projection of all treatment information at once (Isocenter, Field and MLC-shapes) Small and compact system auto-calibration fast, easy & accurate Simultaneous projection in red, green & yellow

PICTOR 3D TECHNOLOGY Laser 1. Laser projects on first mirror 2. Beam is deflected by mirrors in directions X and Y 3. Computer sends information about projection of the PICTOR 3D system

PICTOR 3D SETUP Three projectors mounted in the plane of the virtual isocenter Virtual isocenter 80cm in front of scan plane

SYSTEM CONFIGURATION Patient surface is transmitted to PICTOR 3D Software decides which projector is used for projection Intelligent combined lasers overcome shadowing Example of field projection on patient s surface with shadowing Projection of field shapes with intelligent combined multiple lasers to overcome shadowing

QUALITY ASSURANCE QA-Phantom Plexiglass phantom as model for laser projection Reflectors as markers for projectors Auto Calibration in less than a minute

Thank you for your attention! Questions?

ABOUT LAP LAP Worldwide LAP Laser LLC. Cincinnati LAP of America Laser Applications LC. Boca Raton LAP GmbH Laser Applikationen Lüneburg LAP GmbH Laser Applikationen Vertretung Moskau LAP Laser Applications Asia Pacific Pte Ltd Shanghai Representative Office LAP Laser Applications Asia Pacific Pte Ltd Singapur