3mm (T1) Package Discrete LED AMBER, GREEN, BLUE, TURQUOISE, Ultra Ultra Super Bright Ultra Bright Bright B 3UTC-X Industry Standard 3mm (T1) Package RoHS Compliant Water Clear Lens Available in Flange (F) and Shouldered (S) Lead Frame styles Up to 800 mcd Luminous Intensity at 20 ma Ideal for Back Lighting, Status Indication, and Display Recommended for Bivar Flexible Light Pipe assemblies Bivar 3mm T1 Package Ultra Bright LED is ideal for those applications where intensive ambient lighting exists such as Back Lighting, Signage, and Sunlight Readable applications. Bivar offers water clear LED lens for maximum light output. The Flanged LED is ideal for Panel Mount Clip & Ring assemblies. The Shouldered Lead frame LED is ideal for vertical spacer assemblies without lead bends and also has a built in strain relief feature which is ideal for right angle holder assemblies that require lead bends. Part Number Material Emitted Color Peak. Wavelength λp(nm) TYP. Lens Appearance Viewing Angle 3UTC-F Water Clear 20 GaN/SiC TURQUOISE 500nm 3UTC-S Water Clear 30 Part Number Designation LED Body, mm Ultra Bright Emitted Color 3 U X X - X Lead Frame & Body Style i.e. -F, -S Lens Appearance ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES Bivar reserves the right to make changes at any time without notice. RoHS Compliant Moisture Sensitivity Levels 1 Page 1 of 5
Outline Dimensions Flanged 3UXX-F LED Shouldered Lead 3UXX-S LED Outline Drawings Notes: 1. All dimensions are in inches [millimeters]. 2. Standard tolerance: ±10" unless otherwise noted. 3. Tolerance of overall epoxy outline: ±20" unless otherwise noted. 4. Epoxy meniscus may extend to 60" max. Page 2 of 5
Absolute Maximum Ratings T A = 25 C unless otherwise noted Power Dissipation Forward Current ( DC ) Peak Forward Current 1 Reverse Voltage Operating Temperature Range Storage Temperature Range 70 mw 30 ma 150 ma 5 V -25 ~ +85 C -30 ~ +100 C Lead Soldering Temperature ( 3 mm from the base of the epoxy bulb ) 2 260 C Notes: 1. 10% Duty Cycle, Pulse Width 0.1 msec. 2. Solder time less than 5 seconds at temperature extreme. Electrical / Optical Characteristics T A = 25 C & I F = 20 ma unless otherwise noted Part Number Forward Voltage (V) 1 Recommend Forward Current (ma) Reverse Current (μa) Dominant Wavelength (nm) 2 Luminous Intensity (mcd) Viewing Angle 2 Ө ½ (deg) MIN TYP MAX MIN TYP MAX MAX MIN TYP MAX MIN TYP MAX TYP 3UTC-F / / / / 800 / 20 / 3.5 4.0 / 20 / 100 3UTC-S / / / / 800 / 30 Notes: 1. Tolerance of forward voltage : ±5V. 2. Tolerance of dominant wavelength : ±nm. Page 3 of 5
Typical Electrical / Optical Characteristics T A = 25 C unless otherwise noted 0 10 20 30 20 30 40 50 0.5 60 70 480 530 580 630 λ(nm) 0.5 0.3 0.1 0.2 0.4 0.6 80 90 Fig. 1 Relative Luminous Intensity vs. Wavelength @ 20mA 1000 100 10 If (ma) 1 Fig. 2 Directivity Radiation Diagram 4.0 0.1 4.0 5.0 Vf (V) 1 10 100 1000 If (ma) Fig. 3 Forward Current vs. Forward Voltage Fig. 4 Relative Luminous Intensity vs. Forward Current Normalize @ 20 ma 1.2 Vf (V) 1.1 0.9 0.8 T ( C) T ( C) -40 0 40 80-40 0 40 80 0 Fig. 5 Forward Voltage vs. Temperature Fig. 6 Relative Luminous Intensity vs. Temperature Page 4 of 5
Recommended Soldering Conditions Recommended Lead Free Wave Soldering Profile Preheat Temperature: 100ºC Max. Peak Temperature: 260ºC Max. Preheat Time: 20 ~ 50 Seconds Solder Time Above 217ºC: 5 Seconds Max. Note: Turn off top heater at preheat to prevent the lamp body directly exposed to the heat source. Packaging and Labeling Plan Anti-Static Poly Bag with Desiccant (500 pcs Max. per Bag) Bivar reserves the right to Bivar make reserves changes the at any right time to make in order changes to improve at any design time without and to supply notice. the best product possible. Bivar, Bivar, Inc. Inc. 4 Thomas, Thomas, Irvine, Irvine, California California 92618, 92618, U.S.A. U.S.A. Revision Rev. A C 01/16/08 06/15 Phone: Phone: 951-8808 951-8808 Fax: Fax: 951-3974 951-3974 Web: E-mail: www.bivar.com bivar@bivar.com Web: www.bivar.com Page Page 4 5 of of 4 5