MicroBoom Carbon Fiber Boom Arms OVERVIEW The MicroBoom integrated carbon fiber boom system is available in three lengths: 24, 50 and 84 and is designed to be used with the award winning Micros Series of miniaturized condensers. Lightweight and able to attach to any standard microphone stand, the MicroBoom is a problem solver for portability and hard-to-reach miking applications including choir, live theater and orchestra. The MicroBoom can be used with a choice of capsules in the Micros Series, offering a broad choice of pick-up pattern and frequency response. A high quality shielded cable is used internally to insure the cleanest audio signal path between the microphone and the bottom of the boom, which terminates in a mini-xlr male connector. The MCBOOM adaptor allows for total control over the angle, rotation and position of the carbon fiber rod. The MicroBoom provides an ultra-clean, professional and elegant appearance on stage while providing exceptional performance and portability. MODEL VARIATIONS MICROBOOM24-24 carbon fiber boom arm with clutch assembly MICROBOOM50-50 carbon fiber boom arm with clutch assembly MICROBOOM84-84 carbon fiber boom arm with clutch assembly MICROBOOM SYSTEMS The MicroBoom System comes with a carbon fiber boom, clutch assembly, microphone, cable and windscreen. MB5050-50 carbon fiber boom, clutch assembly & M1250B cardioid mic MB5050HC - same as above but with a M1250BHC hypercardioid mic MB5055 - same as above but with a M1255B high output cardioid mic MB5055HC - same as above but with a M1255BHC high output hypercardioid mic MB8450-80 carbon fiber boom, clutch assembly & M1250B cardioid mic MB8450HC - same as above but with a M1250BHC hypercardioid mic MB8455 - same as above but with a M1255B high output cardioid mic MB8455HC - same as above but with a M1255BHC hypercardioid mic MicroBoom TM in 24, 50, & 84 FEATURES Clean, elegant appearance Choice of capsules No external power needed Designed, assembled & tested in the USA 1 year warranty APPLICATIONS Choir Ensemble vocal Theatre Orchestral zone miking Location recording Presentation Conference room Video production SUPPLIED ACCESSORIES MCBOOM - Mic stand adapter with thumbscrew and wing nut adjustments OPTIONAL ACCESSORIES CBL20 MCBOOM CBLDR25 WS1218 CBLM25-25 shielded mic cable with mini-xlrf - XLRm connectors STANDMB - Pedestal mic stand adjustable 13-20 inches WS1218 - Windscreen MicroBoom
SPECIFICATIONS Rod material Gooseneck Length MicroBoom 24 Length MicroBoom 50 Length MicroBoom 84 Diameter Connections Weight MicroBoom 24 Weight MicroBoom 50 Weight MicroBoom 84 Finish DIMENSIONS (mm) Carbon Fiber Flexible Steel 609 mm / 24 in 1270 mm / 50 in 2134 mm / 84 in 7.4 mm /.2 in mini-xlrm (bottom) mini-xlrf (top) 45 g / 1.6 oz 78 g / 2.5 oz 111 g / 4 oz Black Finish OPERATION The MicroBoom is a modular system and simple to use. The microphone attaches to the mini-xlr connector at the end of the gooseneck. To release and remove the microphone from the connector, simply push the black button on the side of the mini-xlr and pull the microphone off. MicroBoom 609 2134 PRODUCT REGISTRATION: Please register your product online at www.audixusa.com/docs_12/about/product_registration.shtml. SERVICE AND WARRANTY: This product is under warranty for a period of 1 year to be free of defects in material and workmanship. In the event of a product failure due to materials or workmanship, Audix will repair or replace said product at no charge with proof of purchase. Audix does not pay or reimburse shipping costs for warranty repairs or returns. The warranty excludes any causes other than manufacturing defects, such as normal wear, abuse, environmental damage, shipping damage or failure to use or maintain the product per the supplied instructions. No Implied Warranties: All implied warranties, including but not limited to implied warranties of merchantability and fitness for a particular purpose are hereby excluded. The liability of Audix, if any, for damages relating to allegedly defective products shall be limited to the actual price paid by Dealer for such products and shall in no event include incidental or consequential damages of any kind. Should your microphone fail in any way, please contact the Audix Service department at 503.682.6933. A Return Authorization is required before returning any product. OTHER THAN THIS WARRANTY, AUDIX MAKES NO WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCTS, THE USE OF THE PRODUCTS, THE PERFORMANCE OF THE PRODUCTS. AUDIX SHALL NOT BE LIABLE FOR SPECIAL INCIDENTAL, CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES ARISING FROM OR BASED ON THE SALE, USE, STORAGE OR DISPOSAL OF THE PRODUCTS, AUDIX S SERVICE WORK, BREACH OF WARRANTY, BREACH OF CONTRACT. NEGLIGENCE, OR ANY OTHER THEORY OF LIABILITY, EVEN IF AUDIX HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. ALL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. www.audixusa.com 503.682.6933 Fax: 503.682.7114 Audix Corporation 9400 SW Barber St. Wilsonville, OR 97070 ver 3.2 12-15
M1250B OVERVIEW The M1250B is a miniaturized cardioid condenser microphone with a fully integrated preamp, detachable cable and has RF immunity to prevent interference from cell phone and GSM devices. The M1250B is also available with hypercardioid, omni or shotgun capsules, giving the microphone the unique ability to be used in a wide variety of live, studio and broadcast applications. MINIATURE CONDENSER MICROPHONE The M1250B is available with a wide array of clips and accessories allowing the microphone to be used for acoustic instruments, choral miking, overhead stage miking, podiums, conferences and presentations. MODEL VARIATIONS The M1250B mics are also available with white finish. M1250BHC - Hypercardioid mic in black M1250BO - Omnidirectional mic in black M1250BS - Supercardioid mic in black SUPPLIED ACCESSORIES CBLM25-25 cable with mini-xlrf - XLRm connectors MCMICRO - Mic stand adapter MCHANGER - Hanging clip WS1218 - External foam windscreen OPTIONAL ACCESSORIES MICROBOOM - 24, 50 or 84 carbon fiber boom arm with clutch assembly MCSWIVEL - Shock mount adapter with ball and socket pivot for complete control over mic positioning. For use with The Micros TM DCLAMPMICRO - Lug mount adapted for hand percussion instruments with shockmount ring DVICEMICRO - Drum rim mount attachment with shockmount ring DFLEXMICRO - Wide jaw butterfly clip with shockmount ring MC20i - Clamp on clip for Sax, Trumpet and other brass instruments MGN Series - 6, 12 or 18 gooseneck with base terminating in standard XLRm ATS10 - Heavy duty shock absorbent table stand FEATURES Lightweight, small profile Miniaturized preamp circuitry No external power adapter needed 12 mm gold vapor diaphragm Immune to RF interference Extremely low noise, high SPL handling Designed, assembled, manufactured & tested in the USA 3 year warranty APPLICATIONS Acoustic instruments Ambient room miking Symphonic area miking Speech, Presentation Cymbals, Percussion Acoustic miking Choral miking DFLEX MICRO MCSWIVEL MC HANGER MICROBOOM MGN 18 on ATS10 M1250B
SPECIFICATIONS Transducer Type Frequency Response Polar Pattern Output Impedance Sensitivity Signal/Noise Ratio Equivalent Noise Level Maximum SPL Dynamic Range Power Requirements Connector Materials / Finish Weight Length DIMENSIONS (mm) Condenser 50 Hz - 19 khz Cardioid, Hypercardiod, Omni, Supercardiod 150 ohms 10 mv (C/HC), 11mV (O/S) / Pa @ 1k 73 db 21 db (A-weighted) 140 db 119 db 18-52 V 3 pin mini-xlrm Machined Brass / Black Finish 16 g / 0.56 oz 54 mm / 2.1 in ARCHITECT AND ENGINEER SPECIFICATIONS The microphone shall be of the condenser type with a modular threaded capsule available in cardioid, hypercardioid, omni and supercardioid polar patterns. The microphone shall be protected from RF interference. The microphone shall have a fully integrated preamp circuit thereby eliminating the need for a remote preamplifier module. The microphone shall operate on 18-52 Volts DC and the nominal output impedance shall be equal to 150 ohms at 1 khz. The microphone shall have a sensitivity of 10 mv (C/HC), 11mV (O/S) / Pa at 1 khz. The microphone shall have a maximum SPL level of 140 db with THD of 0.5%, the microphone shall be machined out of brass and the dimensions shall be 12 mm in diameter by 54 mm in length. The microphone shall be the Audix M1250B. OPERATION The M1250B is a low impedance microphone and should be plugged into a mic level input on your console, mixer or recording device. The M1250B requires phantom power and will NOT operate without phantom power voltage (48 Volts recommended) which is available on most professional mic preamps and mixing devices. If phantom power is not available on your equipment, use a phantom power supply such as the Audix APS2. Avoid plugging or unplugging the microphone from a PA system unless the channel is muted or the volume of the system turned down. Failure to do so may result in a loud popping noise which could seriously damage the speakers in the PA system, studio monitors or headphones. M1250B FREQUENCY RESPONSE POLAR PATTERNS Cardioid Hypercardioid Omni Shotgun USER TIPS The M1250B, despite its size, has all the attributes of a world class recording microphone. Low noise integrated electronics allows the microphone to function in the close field as well as in distance miking. It can be used on a wide variety of acoustics instruments as well as on voice and vocal ensembles. Cardioid: The cardioid pattern is the most widely used as it offers a good balance between the sound of the instrument or voice within the context of the room or venue. For instruments, the M1250B may be positioned anywhere from 3-12 inches depending on instrument and room acoustics. For speech or singe voice the typical working distance is 8-10 inches. For area miking or group vocals the working distance can be between 2-3 feet from the sound source. Hypercardioid: In situations where the volume is loud on stage or there are many open microphones, this pattern is helpful in further isolating the instrument or vocal from the rest of the instruments on stage. The microphone can be worked at ½ the distance of cardioid if necessary. Supercardioid: This pattern has a longer reach and more narrow pattern than the other cardioid patterns. This pattern is helpful for podium applications where more distance is a factor. It is helpful in pin-pointing hard to reach areas, especially for recording outdoors, and with video. Omni: This pattern offers the most accurate and natural sound reproduction of all the patterns. It is ideal for recording, live broadcasts or video where sound reinforcement speakers are not an issue. Further miking techniques may be found on our website at www.audixusa.com. PRODUCT REGISTRATION: Please register your product online at www.audixusa.com/docs_12/about/product_registration.shtml. SERVICE AND WARRANTY: This microphone is under warranty for a period of 3 years to be free of defects in material and workmanship. In the event of a product failure due to materials or workmanship, Audix will repair or replace said product at no charge with proof of purchase. Audix does not pay or reimburse shipping costs for warranty repairs or returns. The warranty excludes any causes other than manufacturing defects, such as normal wear, abuse, environmental damage, shipping damage or failure to use or maintain the product per the supplied instructions. No Implied Warranties: All implied warranties, including but not limited to implied warranties of merchantability and fitness for a particular purpose are hereby excluded. The liability of Audix, if any, for damages relating to allegedly defective products shall be limited to the actual price paid by Dealer for such products and shall in no event include incidental or consequential damages of any kind. Should your microphone fail in any way, please contact the Audix Service department at 503.682.6933. A Return Authorization is required before returning any product. OTHER THAN THIS WARRANTY, AUDIX MAKES NO WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCTS, THE USE OF THE PRODUCTS, THE PERFORMANCE OF THE PRODUCTS. AUDIX SHALL NOT BE LIABLE FOR SPECIAL INCIDENTAL, CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES ARISING FROM OR BASED ON THE SALE, USE, STORAGE OR DISPOSAL OF THE PRODUCTS, AUDIX S SERVICE WORK, BREACH OF WARRANTY, BREACH OF CONTRACT. NEGLIGENCE, OR ANY OTHER THEORY OF LIABILITY, EVEN IF AUDIX HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. ALL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. www.audixusa.com 503.682.6933 Fax: 503.682.7114 Audix Corporation 9400 SW Barber St. Wilsonville, OR 97070 ver 3.0 05-16
M1255B Miniature Condenser Microphone OVERVIEW The M1255B is a miniaturized condenser microphone with a fully integrated preamp, detachable cable and is designed with very high sensitivity for distance miking. Applications include ceiling mount or table mount for conferencing, hanging choir miking, location recording, audience or room miking. The M1255B has complete immunity from RF interference caused by cell phones and GSM devices. The M1255B is equipped with a cardioid capsule and is also available with hypercardioid, omni or shotgun capsules. The microphone has the unique ability to be used in a wide variety of live, studio and broadcast applications. The M1255B is available with a wide array of clips and accessories for musical instruments, overhead stage miking, podiums, conferences and presentations. MODEL VARIATIONS The M1255B mics are also available with white finish (M1255BW). M1255BHC - Hypercardioid mic in black, also available in white (M1255BWHC). M1255BO - Omni-directional mic in black, also available in white (M1255BWO). M1255BS - Supercardioid mic in black, also available in white (M1255BWS). SUPPLIED ACCESSORIES CBL25-25 cable with mini-xlrf - XLRm connectors MCMICRO - Mic stand adapter MCHANGER - Hanging clip WS1218 - External foam windscreen OPTIONAL ACCESSORIES MICROBOOM - 24, 50 or 84 carbon fiber boom arm with clutch assembly SMTMICRO - Stand adapter with rubber insulated shockmount DCLAMPMICRO - Lug mount adapter for hand percussion instruments with shockmount ring DVICEMICRO - Drum rim mount attachment with shockmount ring MC20i - Clamp on clip for Sax, Trumpet and other brass instruments MGN Series - 6, 12 or 18 gooseneck with base terminating in standard XLRm FEATURES Small, lightweight, low profile Miniaturized preamp circuitry No external power adapter needed 12 mm gold vapor diaphragm Immune to RF interference Extremely low noise, high SPL handling Designed, assembled, manufactured & tested in the USA 3 year warranty APPLICATIONS Speech, Podium, Presentation Overhead mic for choir, group vocals Acoustic instruments Ambient room miking Vocal ensembles Cymbals, Percussion SMTMICRO MCHANGER MG12 / 15 / 18 MICROBOOM M1255BW M1255B
SPECIFICATIONS Transducer Frequency Response Polar Pattern Output Impedance Sensitivity Signal/Noise Ratio Equivalent Noise Level Maximum SPL Dynamic Range Power Requirements Connector Materials / Finish Weight Length FREQUENCY RESPONSE POLAR PATTERNS DIMENSIONS (mm) Condenser 50 Hz - 19 khz Cardioid, Hypercardioid, Omni, Supercardioid 150 ohms 38 mv (C), 32 mv (HC) 40 mv (O), 60 mv (S) / Pa @ 1k 73 db 21 db (A-weighted) 130 db 109 db 18-52 V 3 pin mini-xlrm Machined brass / Black or White Finish 16 g / 0.56 oz 54 mm / 2.1 in Cardioid Hypercardioid Omni Shotgun ARCHITECT AND ENGINEER SPECIFICATIONS The microphone shall be of the condenser type with a modular threaded capsule available in cardioid, hypercardioid, omnidirectional and supercardioid polar patterns. The microphone shall be protected from RF interference. The microphone shall have a fully integrated preamp circuitry thereby eliminating the need for a remote preamplifier module. The microphone shall operate on 18-52 Volts DC and the nominal output impedance shall be equal to 150 ohms at 1 khz. The microphone shall have a sensitivity at of 38 mv (C), 32 mv (HC), 40 mv (O), 60 mv (S) / Pa at 1 khz. The microphone shall have a maximum SPL level of 130 db with THD of 0.5% and the microphone shall be machined out of brass and the dimensions shall be 12 mm in diameter by 54 mm in length. The microphone shall be the Audix M1255B. OPERATION AND MAINTENANCE The M1255B is a low impedance microphone and should be plugged into a mic level input on your console, mixer, or recording device. The M1255B requires phantom power and will NOT operate without phantom power voltage (18-52 Volts) which is available on most professional mic preamps and mixing devices. If phantom power is not available on your equipment, use a phantom power supply such as the Audix APS2. Avoid plugging or unplugging the microphone from a PA system unless the channel is muted or the volume of the system turned down. Failure to do so may result in a loud popping noise which could seriously damage the speakers in the PA system, studio monitors or headphones. USER TIPS The M1255B is designed with extremely high sensitivity. This, in conjunction with very low noise electronics, allows it to be used as a distance microphone either overhead or on a table. The M1255B is particularly effective in situations where achieving the proper gain is a challenge, either because the mic mixer has limited gain or the strength of the sound source. Cardioid: With its small size, the M1255B can also be used in hard to reach areas, such as beneath cymbals. For orchestral instruments, the M1255B may be positioned anywhere from 3-12 inches depending on instrument and room acoustics. For speech or single voice, the typical working distance is 8-10 inches. For area miking or group vocals the working distance can be between 2-6 feet from the sound source. Hypercardioid: In situations where the volume is loud on stage or there are many open microphones, this pattern is helpful in further isolating the instrument or vocal from the rest of the instruments on stage. The microphone can be worked at ½ the distance of cardioid if necessary. M1255B Supercardioid: This pattern is a preference for podium applications. It is helpful in pin-pointing hard to reach areas, especially for recording outdoors and with video. Omnidirectional: This pattern offers the most accurate and natural sound reproduction of all the patterns. It is ideal for recording, live broadcasts or video where sound reinforcement speakers are not an issue. Not recommended for conferencing applications. Further miking techniques may be found at www.audixusa.com. PRODUCT REGISTRATION: Please register your product online at www.audixusa.com/docs_12/about/product_registration.shtml. SERVICE AND WARRANTY: This microphone is under warranty for a period of 5 years to be free of defects in material and workmanship. In the event of a product failure due to materials or workmanship, Audix will repair or replace said product at no charge with proof of purchase. Audix does not pay or reimburse shipping costs for warranty repairs or returns. The warranty excludes any causes other than manufacturing defects, such as normal wear, abuse, environmental damage, shipping damage or failure to use or maintain the product per the supplied instructions. No Implied Warranties: All implied warranties, including but not limited to implied warranties of merchantability and fitness for a particular purpose are hereby excluded. The liability of Audix, if any, for damages relating to allegedly defective products shall be limited to the actual price paid by Dealer for such products and shall in no event include incidental or consequential damages of any kind. Should your microphone fail in any way, please contact the Audix Service department at 503.682.6933. A Return Authorization is required before returning any product. OTHER THAN THIS WARRANTY, AUDIX MAKES NO WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCTS, THE USE OF THE PRODUCTS, THE PERFORMANCE OF THE PRODUCTS. AUDIX SHALL NOT BE LIABLE FOR SPECIAL INCIDENTAL, CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES ARISING FROM OR BASED ON THE SALE, USE, STORAGE OR DISPOSAL OF THE PRODUCTS, AUDIX S SERVICE WORK, BREACH OF WARRANTY, BREACH OF CONTRACT. NEGLIGENCE, OR ANY OTHER THEORY OF LIABILITY, EVEN IF AUDIX HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. ALL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. www.audixusa.com 503.682.6933 Fax: 503.682.7114 Audix Corporation 9400 SW Barber St. Wilsonville, OR 97070 ver 3.0 05-16
M1280B OVERVIEW Dynamic Instrument Microphone The M1280B, a miniaturized condenser microphone with a fully integrated preamp and detachable cable, has complete immunity from RF interference caused by cell phones and GSM devices. The M1280B is equipped with a cardioid capsule and is also available with hypercardioid, omni or shotgun capsules. The M1280B has a very wide frequency response and may be used in a wide variety of live, studio and broadcast applications. The M1280B is available with a wide array of clips and accessories allowing the microphone to be used for drums, percussion, musical instruments, overhead stage miking, podiums, conferences and presentations. MODEL VARIATIONS M1280BHC - Hypercardioid mic M1280BO - Omni-directional mic M1280BS - Supercardioid (shotgun) mic FEATURES Lightweight, small profile SUPPLIED ACCESSORIES CBLM25-25 cable with mini-xlrf - XLRm connectors MCHANGER - Hanging clip MCMICRO - Mic stand adapter WS1218 - External foam windscreen Miniaturized preamp circuitry No external power adapter needed 12 mm gold vapor diaphragm Immune to RF interference Extremely low noise, high SPL handling OPTIONAL ACCESSORIES DCLAMPMICRO - Lug mount with shock mount ring, adapted for hand percussion instruments DVICEMICRO - Drum rim mount attachment with shockmount ring DFLEXMICRO - Wide jaw butterfly clip with shockmount ring MCSWIVEL - Shock mount adaptor with ball and socket pivot for complete mic positioning MC20i - Clamp on clip for saxophone with shockmount ring MGN Series - 6, 12 or 18 gooseneck with base terminating in standard XLRm MICROBOOM - 24, 50 or 84 carbon fiber boom arm with clutch assembly SMTMICRO - Stand adapter with rubber insulated shockmount Designed, assembled, manufactured & tested in the USA 3 year warranty APPLICATIONS Overhead mic for choir, group vocal Acoustic instruments Ambient room miking Symphonic area miking Speech, Presentation, Podium Cymbals, Percussion Acoustic guitar MCHANGER MCMICRO MCSWIVEL MICROBOOM M1280B on DFLEXMICRO M1280B
SPECIFICATIONS Transducer Type Frequency Response Polar Pattern Output Impedance Sensitivity Signal/Noise Ratio Equivalent Noise Level Maximum SPL Dynamic Range Power Requirements Connector Polarity Materials / Finish Weight Length Condenser 40 Hz - 20 khz Cardioid, Hypercardioid, Omni, Supercardioid 150 ohms 10 mv (C/HC), 12 mv (O), 18 mv (S) / Pa @ 1k 73 db 21 db (A-weighted) 147 db 126 db 18-52 V 3-pin XLRm Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector Machined Brass / Black Finish 28 g / 1 oz 67 mm / 2.6 in ARCHITECT AND ENGINEER SPECIFICATIONS The microphone shall be of the condenser type with a modular threaded capsule available in cardioid, hypercardioid, omni-directional and supercardioid polar patterns. The microphone shall be protected from RF interference. The microphone shall have a fully integrated preamp circuit thereby eliminating the need for a remote preamplifier module. The microphone shall operate on 18-52 Volts DC and the nominal output impedance shall be equal to 150 ohms at 1 khz. The microphone shall have a sensitivity of 10 mv (C/HC), 12 mv (O), 18 mv (S) / pa at 1 khz. The microphone shall have a maximum SPL level of 147 db with THD of.5% and the microphone shall be machined out of brass and the dimensions shall be 12 mm in diameter by 67 mm in length. The microphone shall be the Audix M1280B. OPERATION AND MAINTENANCE The M1280B is a low impedance microphone and should be plugged into a mic level input on your console, mixer or recording device. The M1280B requires phantom power and will NOT operate without phantom power voltage (48 Volts recommended) which is available on most professional mic preamps and mixing devices. If phantom power is not available on your equipment, use a phantom power supply such as the Audix APS2. Avoid plugging or unplugging the microphone from a PA system unless the channel is muted or the volume of the system turned down. Failure to do so may result in a loud popping noise which could seriously damage the speakers in the PA system, studio monitors or headphones. M1280B DIMENSIONS (mm) USER TIPS The M1280B, despite its size, has all the attributes of a world class recording microphone. Low noise integrated electronics allows the microphone to function in the close field as well as in the far field. It can be used on a wide variety of acoustics instruments as well as on voice and vocal ensembles. FREQUENCY RESPONSE POLAR PATTERNS Cardioid Hypercardioid Omni Shotgun Cardioid: The cardioid pattern is helpful with resistance to feedback. For percussion the M1280B should be used 1-2 feet above the cymbals, or because of its small size, could also be used in hard to reach areas such as beneath the cymbals. For orchestral instruments, the M1280B may be positioned anywhere from 3-12 inches depending on instrument and room acoustics. For speech or voice the typical working distance is 8-10 inches. For area miking or group vocals the working distance can be between 2-3 feet from the sound source. Hypercardioid: In situations where the volume is loud on stage or there are many open microphones, this pattern is helpful in further isolating the instrument or vocal from the rest of the instruments on stage. The microphone can be worked at ½ the distance of cardioid if necessary. Supercardioid: This pattern is best for podium applications. It is helpful in pinpointing hard to reach areas, especially for recording outdoors, and with video. Omni-Directional: The Omni pattern offers the most accurate and natural sound reproduction of all the patterns. It is ideal for recording, live broadcasts or video, where sound reinforcement speakers are not an issue. Further miking techniques may be found on our website at www.audixusa.com PRODUCT REGISTRATION: Please register your product online at www.audixusa.com/docs_12/about/product_registration.shtml. SERVICE AND WARRANTY: This microphone is under warranty for a period of 3 years to be free of defects in material and workmanship. In the event of a product failure due to materials or workmanship, Audix will repair or replace said product at no charge with proof of purchase. Audix does not pay or reimburse shipping costs for warranty repairs or returns. The warranty excludes any causes other than manufacturing defects, such as normal wear, abuse, environmental damage, shipping damage or failure to use or maintain the product per the supplied instructions. No Implied Warranties: All implied warranties, including but not limited to implied warranties of merchantability and fitness for a particular purpose are hereby excluded. The liability of Audix, if any, for damages relating to allegedly defective products shall be limited to the actual price paid by Dealer for such products and shall in no event include incidental or consequential damages of any kind. Should your microphone fail in any way, please contact the Audix Service department at 503.682.6933. A Return Authorization is required before returning any product. OTHER THAN THIS WARRANTY, AUDIX MAKES NO WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCTS, THE USE OF THE PRODUCTS, THE PERFORMANCE OF THE PRODUCTS. AUDIX SHALL NOT BE LIABLE FOR SPECIAL INCIDENTAL, CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES ARISING FROM OR BASED ON THE SALE, USE, STORAGE OR DISPOSAL OF THE PRODUCTS, AUDIX S SERVICE WORK, BREACH OF WARRANTY, BREACH OF CONTRACT. NEGLIGENCE, OR ANY OTHER THEORY OF LIABILITY, EVEN IF AUDIX HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. ALL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. www.audixusa.com 503.682.6933 Fax: 503.682.7114 Audix Corporation 9400 SW Barber St. Wilsonville, OR 97070 ver 3.0 12-15