UNISONIC TECHNOLOGIES CO., LTD LOW DROP FIXED AND ADJUSTABLE POSITIE OLTAGE REGULATORS DESCRIPTION The UTC LD1117/A is a low dropout, 3-terminal positive voltage regulator designed to provide output current up to 800/1A, There are adjustable version ( REF =1.25) and various fixed versions. FEATURES * Low dropout voltage * Suitable for SCSI-2 active termination if OUT set to 2.85 * Output current up to 0.8A for 1117 and 1.0A for 1117A * Built-in current limit and over temperature protection * Low current consumption * Support MLCC ORDERING INFORMATION Ordering Number Package Lead Free Halogen Free Pin Assignment LD1117 L-xx-AA3- - LD1117 G-xx-AA3- - SOT-223 LD1117 L-xx-AB3- - LD1117 G-xx-AB3- - SOT-89 LD1117 L-xx-TA3- - LD1117 G-xx-TA3- - TO-220 Pin Code 1 2 3 LD1117 L-xx-TF3- - LD1117 G-xx-TF3- - TO-220F A G O I LD1117 L-xx-TN3- - LD1117 G-xx-TN3- - TO-252 B O G I LD1117 L-xx-TND- - LD1117 G-xx-TND- - TO-252D C G I O LD1117 L-xx-T2Q- - LD1117 G-xx-T2Q- - TO-262 D I G O LD1117 L-xx-TQ2- - LD1117 G-xx-TQ2- - TO-263 LD1117 L-xx-TQ3- - LD1117 G-xx-TQ3- - TO-263-3 LD1117 L-xx-S08- - LD1117 G-xx-S08- - SOP-8 GOOIxOOx Notes: 1. : Current code: Blank: 800 A: 1A 2. Pin Assignment: I: IN O: OUT G: GND/ADJ 3. xx:, Refer to Marking Information. Packing R: Tape Reel T: Tube LD1117 1 G-xx-AA3-2 - 3 (1)Packing Type (2)Pin Assignment (3)Package Type (4) Code (5)Green Package (6)Current Code (1) R: Tape Reel, T: Tube (2) refer to Pin Assignment (3) AA3: SOT-223, AB3: SOT-89, TA3:TO-220, (3) TF3: TO-220F, TN3: TO-252, TND: TO-252D (3) T2Q: TO-262, TQ2: TO-263, TQ3: TO-263-3, (3) S08: SOP-8 (4) xx: refer to Marking Information (5) G: Halogen Free and Lead Free, L: Lead Free (6) Blank: 800, A: 1A 1 of 15 Copyright 2018 Unisonic Technologies Co., Ltd
MARKING INFORMATION PACKAGE OLTAGE CODE MARKING SOT-89 SOT-223 TO-220 TO-220F TO-252 TO-252D TO-262 TO-263 TO-263-3 12 :1.2 15 :1.5 18 :1.8 25 :2.5 2J :2.85 30 :3.0 33 :3.3 36 :3.6 50 :5.0 AD :ADJ SOP-8 Note: Current code: Blank: 0.8A A: 1A PIN CONFIGURATION of SOP-8 GND/ ADJ 1 8 NC OUT 2 7 OUT OUT 3 6 OUT IN 4 5 NC UNISONIC TECHNOLOGIES CO., LTD 2 of 15
BLOCK DIAGRAM UNISONIC TECHNOLOGIES CO., LTD 3 of 15
ABSOLUTE MAXIMUM RATINGS (T A =25 C) PARAMETER SYMBOL RATINGS UNIT DC Input oltage IN 18 Power Dissipation P D Internally limited Junction Temperature T J +150 C Operating Temperature (Note 2) T OPR -20 ~ +125 C Storage temperature T STG -65 ~ +150 C Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2. This condition is only determined from design. It can't be 100% tested in mass production. RECOMMENDED OPERATING RATINGS PARAMETER SYMBOL RATINGS UNIT Input oltage IN 15 Operating Junction Temperature T J -20 ~ +125 C THERMAL DATA PARAMETER SYMBOL RATINGS UNIT SOT-223 165 C/W SOT-89 180 C/W Junction to Ambient SOP-8 150 C/W θ JA TO-252/TO-252D 112 C/W TO-220 54 C/W TO-262/TO-263 64 C/W SOT-223 15 C/W SOT-89 50 C/W Junction to Case SOP-8 20 C/W θ JC TO-252/TO-252D 12 C/W TO-220/TO-262 TO-263 4 C/W UNISONIC TECHNOLOGIES CO., LTD 4 of 15
ELECTRICAL CHARACTERISTICS (T A =25 C, refer to the test circuits, T J =0 ~ 125 C, C O =10μF unless otherwise specified) For LD1117/A-1.2 PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT OUT IN =3.2, I OUT =10, T J =25 C 1.176 1.200 1.224 IN =2.7 to 8 OUT LD1117 : I OUT =10~800 1.176 1.200 1.224 LD1117A : I OUT =10~1000 Line Regulation OUT IN =2.7 to 8, I OUT =10 1 6 m IN =2.7 OUT LD1117 : I OUT =10~800 1 10 m LD1117A : I OUT =10~1000 Temperature stability OUT 0.5 % Long Term Stability OUT 1000 hrs, T J =125 C 0.3 % Operating Input oltage IN I OUT =100 15 Quiescent Current I Q IN 10 5 10 Current Limit I LIMIT IN =6.2, T J =25 C Minimum Load Current I O(MIN) IN =15 2 5 Output Noise oltage e N B=10Hz to 10KHz, T J =25 C 100 Supply oltage Rejection SR IN =4.2, RIPPLE =1 PP For LD1117/A-1.5 PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT OUT IN =3.5, I OUT =10, T J =25 C 1.470 1.500 1.530 IN =3 to 8 OUT LD1117 : I OUT =0~800 1.470 1.500 1.530 Line Regulation OUT IN =3 to 8, I OUT =0 1 6 m OUT IN =3 LD1117 : I OUT =0~800 1 10 m Temperature stability OUT 0.5 % Long Term Stability OUT 1000 hrs, T J =125 C 0.3 % Operating Input oltage IN I OUT =100 15 Quiescent Current I Q IN 10 5 10 Current Limit I LIMIT IN =6.5, T J =25 C Output Noise oltage e N B=10Hz to 10KHz, T J =25 C 100 Supply oltage Rejection SR IN =4.5, RIPPLE =1 PP UNISONIC TECHNOLOGIES CO., LTD 5 of 15
ELECTRICAL CHARACTERISTICS(Cont.) For LD1117/A-1.8 PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT OUT IN =3.8, I OUT =10, T J =25 C 1.764 1.800 1.836 OUT IN =3.3 to 8 LD1117 : I OUT =0~800 1.764 1.800 1.836 Line Regulation OUT IN =3.3 to 8, I OUT =0 1 6 m OUT IN =3.3 LD1117 : I OUT =0~800 1 10 m Temperature stability OUT 0.5 % Long Term Stability OUT 1000 hrs, T J =125 C 0.3 % Operating Input oltage IN I OUT =100 15 Quiescent Current I Q IN 10 5 10 Current Limit I LIMIT IN =6.8, T J =25 C Output Noise oltage e N B=10Hz to 10KHz, T J =25 C 100 Supply oltage Rejection SR IN =5.5, RIPPLE =1 PP For LD1117/A-2.5 PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT OUT IN =4.5, I OUT =10, T J =25 C 2.450 2.500 2.550 IN =3.9 to 10 OUT LD1117 : I OUT =0~800 2.450 2.500 2.550 Line Regulation OUT IN =3.9 to 10, I OUT =0 1 6 m IN =3.9 OUT LD1117 : I OUT =0~800 1 10 m Temperature stability OUT 0.5 % Long Term Stability OUT 1000 hrs, T J =125 C 0.3 % Operating Input oltage IN I OUT =100 15 Quiescent Current I Q IN 10 5 10 Current Limit I LIMIT IN =7.5, T J =25 C Output Noise oltage e N B=10Hz to 10KHz, T J =25 C 100 Supply oltage Rejection SR IN =5.5, RIPPLE =1 PP UNISONIC TECHNOLOGIES CO., LTD 6 of 15
ELECTRICAL CHARACTERISTICS(Cont.) For LD1117/A-2.85 PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT OUT IN =4.85, I OUT =10, T J =25 C 2.793 2.850 2.907 IN =4.25 to 10 OUT LD1117 : I OUT =0~800 2.793 2.850 2.907 Line Regulation OUT IN =4.25 to 10, I OUT =0 1 6 m IN =4.25 OUT LD1117 : I OUT =0~800 1 10 m Temperature stability OUT 0.5 % Long Term Stability OUT 1000 hrs, T J =125 C 0.3 % Operating Input oltage IN I OUT =100 15 Quiescent Current I Q IN 10 5 10 Current Limit I LIMIT IN =7.85, T J =25 C Output Noise oltage e N B=10Hz to 10KHz, T J =25 C 100 Supply oltage Rejection SR IN =5.85, RIPPLE =1 PP For LD1117/A-3.0 PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT OUT IN =5, I OUT =10, T J =25 C 2.940 3.000 3.060 IN =4.5 to 10 OUT LD1117 : I OUT =0~800 2.940 3.000 3.060 Line Regulation OUT IN =4.5 to 12, I OUT =0 1 6 m IN =4.5 OUT LD1117 : I OUT =0~800 1 10 m Temperature stability OUT 0.5 % Long Term Stability OUT 1000 hrs, T J =125 C 0.3 % Operating Input oltage IN I OUT =100 15 Quiescent Current I Q IN 15 5 10 Current Limit I LIMIT IN =8, T J =25 C Output Noise oltage e N B=10Hz to 10KHz, T J =25 C 100 Supply oltage Rejection SR IN =6, RIPPLE =1 PP UNISONIC TECHNOLOGIES CO., LTD 7 of 15
ELECTRICAL CHARACTERISTICS(Cont.) For LD1117/A-3.3 PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT OUT IN =5.3, I OUT =10, T J =25 C 3.234 3.300 3.366 IN =4.75 to 10 OUT LD1117 : I OUT =0~800 3.234 3.300 3.366 Line Regulation OUT IN =4.75 to 15, I OUT =0 1 6 m IN =4.75 OUT LD1117 : I OUT =0~800 1 10 m Temperature stability OUT 0.5 % Long Term Stability OUT 1000 hrs, T J =125 C 0.3 % Operating Input oltage IN I OUT =100 15 Quiescent Current I Q IN 15 5 10 Current Limit I LIMIT IN =8.3, T J =25 C Output Noise oltage e N B=10Hz to 10KHz, T J =25 C 100 Supply oltage Rejection SR IN =6.3, RIPPLE =1 PP For LD1117/A-3.6 PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT OUT IN =5.6, I OUT =10, T J =25 C 3.528 3.600 3.672 OUT IN =5 to 10 LD1117 : I OUT =0~800 3.528 3.600 3.672 Line Regulation OUT IN =5 to 15, I OUT =0 1 6 m OUT IN =5 LD1117 : I OUT =0~800 1 10 m Temperature stability OUT 0.5 % Long Term Stability OUT 1000 hrs, T J =125 C 0.3 % Operating Input oltage IN I OUT =100 15 Quiescent Current I Q IN 15 5 10 Current Limit I LIMIT IN =8.6, T J =25 C Output Noise oltage e N B=10Hz to 10KHz, T J =25 C 100 Supply oltage Rejection SR IN =6.6, RIPPLE =1 PP UNISONIC TECHNOLOGIES CO., LTD 8 of 15
ELECTRICAL CHARACTERISTICS(Cont.) For LD1117/A-5.0 PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT OUT IN =7, I OUT =10, T J =25 C 4.900 5.000 5.100 IN =6.5 to 15 OUT LD1117 : I OUT =0~800 4.900 5.000 5.100 LD1117A : I OUT =0~1.0A Line Regulation OUT IN =6.5 to 15, I OUT =0 1 10 m IN =6.5 OUT LD1117 : I OUT =0~800 1 15 m Temperature stability OUT 0.5 % Long Term Stability OUT 1000 hrs, T J =125 C 0.3 % Operating Input oltage IN I OUT =100 15 Quiescent Current I Q IN 15 5 10 Current Limit I LIMIT IN =10, T J =25 C Output Noise oltage e N B=10Hz to 10KHz, T J =25 C 100 Supply oltage Rejection SR IN =8, RIPPLE =1 PP For LD1117/A-ADJ PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Reference oltage REF IN - OUT =2, I OUT =10, T J =25 C 1.225 1.25 1.275 Reference oltage REF IN - OUT =1.4 to 10 LD1117 : I OUT =10~800 1.225 1.25 1.275 LD1117A : I OUT =10~1000 Line Regulation OUT IN - OUT =1.5 to 13.75, I OUT =10 0.035 0.2 % IN - OUT =3 OUT LD1117 : I OUT =10~800 0.1 0.4 % LD1117A : I OUT =10~1000 Temperature stability OUT 0.50 % Long Term Stability OUT 1000 hrs, T J =125 C 0.3 % Operating Input oltage IN 15 Adjustment Pin Current I ADJ IN 15 60 120 A Adjustment Pin Current Change I ADJ IN - OUT =1.4 to 10, LD1117 : I OUT =10 ~ 800 1 5 A LD1117A : I OUT =10 ~ 1000 Minimum Load Current I O(MIN) IN =15 2 5 Current Limit I LIMIT IN - OUT =5, T J =25 C Output Noise (% O ) e N B=10Hz to 10KHz, T J =25 C 0.003 % Supply oltage Rejection SR IN - OUT =3, RIPPLE =1 PP UNISONIC TECHNOLOGIES CO., LTD 9 of 15
TYPICAL APPLICATIONS UTC LD1117/A-XX IN + IN OUT + OUT 10µF GND/ADJ 100µF Fig.1 Tyncal Application Circuit UTC LD1117/A-XX IN IN OUT OUT 10µF GND/ADJ 10µF Fig.2 Tyncal Application Circuit (FOR MLCC) Fig.3 Negative Supply UNISONIC TECHNOLOGIES CO., LTD 10 of 15
TYPICAL APPLICATIONS(Cont.) 110 110 4.75 to 5.25 + UTC LD1117/A- 2.85 IN OUT GND/ADJ 10µF + 22µF 110 110 18-27 Lines Fig.4 Active Terminator for SCSI-2 BUS Fig.5 Circuit for Increasing UNISONIC TECHNOLOGIES CO., LTD 11 of 15
APPLICATION NOTE of LD1117/A ADJUSTABLE The LD1117/A adjustable has a reference voltage of between the OUT and ADJ/GND pins. I ADJ is 60µA typ. (120µA max.) and I ADJ is 1μA typ. (5µA max.). R 1 is normally fixed to 120Ω. From figure 6 we obtain: OUT = REF +R 2 (I ADJ +I R1 )= REF + R 2 (I ADJ + REF /R 1 )= REF (1+R 2 /R 1 ) + R 2 x I ADJ. Usually R 2 value is in the range of few KΩ, so the R 2 X I ADJ product could be neglected; then the above expression becomes: OUT = REF (1+R 2 /R 1 ) For better load regulation, realize a good Kelvin connection of R 1 and R 2 is important. Particularly R 1 connection must be realized very close to OUT and ADJ/GND pin, while R 2 ground connection must be placed as near as possible to the negative Load pin. Ripple rejection can be improved by introducing a 10μF electrolytic capacitor placed in parallel to the R 2 resistor (See Fig. 8) Fig.6 Adjustable Application Circuit Fig.7 Adjustable Application Circuit (FOR MLCC) Fig.8 Adjustable Application with improved Ripple Rejection. UNISONIC TECHNOLOGIES CO., LTD 12 of 15
TYPICAL CHARACTERISTICS, D () Ripple Rejection (db) Load Current() Input oltage Change() Deviation(m) Deviation(m) UNISONIC TECHNOLOGIES CO., LTD 13 of 15
TYPICAL CHARACTERISTICS(Cont.) Short Circuit Current (A) 2.8 2.4 2.0 1.6 1.2 0.8 0.4 Short-Circuit Current T J =125 C T J =25 C Deveiation (%) 0.16 0.12 0.08 0.04 0-0.04-0.08 I LOAD =1A 0 0 5 10 Input/Output Differential () -0.12-50 -25 0 25 50 75 100 125 Temperature ( C) 1.255 1.250 Reference oltge vs. Temperature 3.70 3.65 vs. Temperautre OUT Set With 1% Resistors Reference oltage, REF () 1.245 1.240 1.235 1.230 1.225 1.220 1.215 1.210 1.205-75 -50-25 0 25 50 75 100 125 150 175 Junction Temperature( C), OUT() 3.60 3.55 3.50 3.45 3.40 3.35 3.30 3.25 3.20-75 OUT=3.3-50 -25 0 25 50 75 100 125 150 175 Junction Temperature, T J ( C), OUT() 2.70 2.65 2.60 2.55 2.50 2.45 2.40 2.35 2.30 2.25 2.20-75 vs. Temperautre OUT Set With 1% Resistors OUT=2.5-50 -25 0 25 50 75 100125 150 175 Junction Temperature, T J ( C), OUT() 2.05 2.00 1.95 1.90 1.85 1.80 1.75 1.70 1.65 1.60 1.55-75 vs. Temperautre OUT Set With 1% Resistors OUT=1.8-50 -25 0 25 50 75 100 125 150 175 Junction Temperature, T J ( C) UNISONIC TECHNOLOGIES CO., LTD 14 of 15
TYPICAL CHARACTERISTICS(Cont.) Safe Operating Area vs. Capacitor ESR 10 8 6 I O =10~1.0A 4 2 0 0 2 4 6 8 10 C O (µf) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. UTC reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. UNISONIC TECHNOLOGIES CO., LTD 15 of 15