Sliding Door System Terra M ST.1062.TM
Sliding Door System TERRA M ST.1062.TM 2 3
Sliding Door System TERRA M ST.1062.TM Terra M is perfect for installations without a load-bearing ceiling. The roller is positioned centrally beneath the glass door, held in place by two stainless steel half-shells. This roller element has two faces: one side underlines the technical aspect, while the other hides its workings beneath a smooth surface. The runner rail can be bolted or glued to the floor or set into a recessed channel (variation). Door weight max. 155 kg Standard finish is decorative satin stainless steel. Partly polished, completely polished or PVD coated finishing (copper, gold or black) is available on request. Feel free to contact us, if you want to learn more about the Terra M system. Terra M glass groove: Floor rail measurements: Optional: recessed floor rail at least 100 mm 7 8 5.5 25 20 For Terra systems with the rails flush-mounted to the floor, the floor rollers are supplied suitably tailored! 4 5
Sliding Door System TERRA M ST.1062.TM 6 7
Sliding Door System TERRA M ST.1062.TM 8 9
Sliding Door System TERRA M ST.1062.TM 10 11
Sliding Door System TERRA M ST.1062.TM - Picture displays the backside of the wheel with concealed screws (scenario for a floor recessed rail). 12 13
Sliding Door System TERRA M ST.1062.TM 14 15
R8 GUIDE PROFILE FOR TERRA SYSTEMS, ONE-PART ONE-PART GUIDE PROFILE INSTALLATION OPTIONS Variant 1: Standard ceiling fastener Variant 2: Standard wall fastener MWE guide profiles are always made of stainless steel! The profiles can be adjusted to glass thicknesses on an individual basis Profile ends can be closed with a welded lid of stainless steel, thus providing a clean end The surface finish is provided to a quality of grain 600 (jewellery quality) (mirror finish possible) If installation is onto a wall or glass, the holes on the guide profile are covered with clip lids. Fastening with angle (in the scope of supply): no visible screws from the front! ST.4040.TE Wall / ceiling guide profile, one-part 23-30 62 30 40 21 The guide profile is divided from a length of 3 metres! One-part guide profile One-part guide profile Wall fastener for one-part guide profile Glass fastener for one-part guide profile Stopper for one-part guide profile Variant 3: ST.2100.TE wall fastener Variant 4: ST.2176.TE.S glass fastener Delivery includes clip lid ST.2100.TE Incl. distance spacer sleeve, wall distance in accordance with customer information ST.2176.TE.S ST.3060.TE Glass fastening with spacer sleeves Different glass spacer sleeves to compensate for e.g. skirting boards or frames in 5 mm steps available. Give base measurement / wall distance when ordering! Wall angle for one-part guide profile Lid for one-part guide profile Mirror-finished surfaces ST.2100.TE wall fastener with spacer sleeves Different wall spacer sleeves to compensate for e.g. skirting boards or frames in 5 mm steps available. Give base measurement / wall distance when ordering! For a closed front side (welded) Mirror finished as part of manufacture ST.2100.TE.W ST.4060.TE Price: 45 % surcharge per component / system One-part guide profile One-part guide profile 16 17
TWO-PARTS GUIDE PROFILE FOR TERRA SYSTEMS WITH MWE SOFT STOP TECHNOLOGY GUIDE PROFILE INSTALLATION OPTIONS, TWO-PARTS WITH MWE SOFT STOP TECHNOLOGY Variant 1: Standard ceiling fastener Variant 2: Standard wall fastener MWE guide profiles are always made of stainless steel! The profiles can be adjusted to glass thicknesses on an individual basis Profile ends are closed with a welded lid as standard, thus providing a clean end The surface finish is provided to a quality of grain 600 (jewellery quality) (mirror finish possible) Advantage of a two-piece guide profile: no visible screws from the front! Advantage of a two-piece guide profile: no visible screws from the front! ST.4053 Wall / ceiling guide profile, two-parts, for MWE soft stop technology 26-32 47.5 R8 Door Türblattbreite leaf width // 2 23.5 13 70 The guide profile is divided from a length of 3 metres! Two-parts guide profile Two-parts guide profile MWE soft stop technology for Terra systems Variant 3: ST.2100.TE.S wall fastener Variant 4: ST.2176.TE.S glass fastener MWE standard: The delivery of the two-part guide profiles takes place with the lids welded for closed front sides. Caution: Max. door leaf weight 75 kg ST.3660 Incl. fasteners, dampers, catches and grid plates Glass fastener for two-parts guide profile Wall fastener for two-parts guide profile Caution: Please indicate if closed front sides are not necessary (e.g. niche area) Mirror-finished surfaces ST.2100.TE.S wall fastener with spacer sleeves Different wall spacer sleeves to compensate for e.g. skirting boards or frames in 5 mm steps available. Give base measurement / wall distance when ordering! Glass fastening with spacer sleeves Different glass spacer sleeves to compensate for e.g. skirting boards or frames in 5 mm steps available. Give base measurement / wall distance when ordering! If the wall distance cannot be compensated for, it can be installed onto glass without a distance spacer. Advantage: small gap dimensions! Incl. distance spacer sleeve, glass distance in accordance with customer information Inc. rosette, spacer sleeve, screw and wall plug, wall distance in accordance with customer information Mirror finished as part of manufacture ST.2176.TE.S ST.2100.TE.S Price: 45 % surcharge per component / system Two-parts guide profile Two-parts guide profile 18 19
FLOOR RAILS FOR TERRA SYSTEMS U-CHANNELS SEAMLESS RAIL CONNECTORS FOR TERRA RAILS ST.2000.TE Floor rails for Terra sliding door systems ST.2025.TE/.K Seamless rail connector for Terra floor rails ST.2025.TE 7 25 If the rail is glued in, seamless rail connector has no screw hole, please indicate, item number ST.2025.TE.K Installation with screws or KK.4070 glue For the sliding door systems: Terra, Terra H, Terra M and Terra M XL For the sliding door systems: Terra, Terra H, Terra M and Terra M XL Floor rails for Terra Akzent sliding door systems Seamless rail connector for Terra Akzent floor rail 4 14 Rail is glued in! Seamless rail connector is glued in! View of the seamless rail connector from below Installation with KK.4070 glue Floor recessed rails Seamless connector for floor recessed rails 8 8 5.5 4 7 ST.2025.TE.K 25 ST.2000.TA ST.2025.TA 14 ST.2008.TE ST.2028.TE 20 20 Rail is glued in! View of the seamless rail connector from below Installation with KK.4070 glue For the sliding door systems: Terra (ST.1060.TE) and Terra Akzent (ST.1064.TA) U-channels made from stainless steel Item Item number KK.4070 Construction glue for Terra floor rails U-channel 15 x 15 x 15 x 1.5 mm delivery length 3 m U-channel 18 x 15 x 18 x 1.5 mm delivery length 3 m U-channel 20 x 20 x 20 x 2 mm delivery length 3 m U-channel 30 x 20 x 30 x 2 mm delivery length 3 m U-channel 40 x 22 x 40 x 2 mm delivery length 3 m Cuts to measurement / mitre ST.4015.UE ST.4018.UE ST.4020.UE ST.4030.UE ST.4040.UE Clamping profile, particularly high stability Content 85 ml, for approx. 2 6 metres floor rail (depending on floor composition) 20 21
MANUFACTORY MWE stands for high quality and great attention to detail. Our philosophy and mission is to provide products that keep up with the spirit of the time. We keep meeting the highest requirements in terms of design, quality and functionality. Top MWE technology combined with excellent customer relationship management results in Quality built on passion! Click here to browse through our catalogues and magazines: Doors Ladders Showers Door pulls 22 23