BESISTA International GmbH Heckenweg 1 DE 73087 Bad Boll BESISTA rod systems Tel +49 7164 9123 9-0 Fax +49 7164 9123 9-17 Info@besista.com ETA-08/0038 DIBt Berlin 0672-CPD-0091 MPA Stuttgart www.besista.com Welcome to BESISTA Your supplier of high-quality tension and compression rod systems for architecture and civil engineering With the following working documents we are pleased to present in compact form the key information on our BESISTA 540 tension and compression rod systems. Our optimised BESISTA 540 designer rod systems offer, compared to other systems, an elegantly crafted, filigree design, a higher load-carrying capacity, greater safety, superior cost effectiveness, exceptionally straightforward handling, and patented safety and installation features. Our tension rods are made of S540N, an extra-high-quality modified S460N with a guaranteed yield strength of 540 N/mm². Another unique feature of BESISTA are hot-dip galvanized rod threads for sustainable construction. If hot-dip galvanized is specified, the client is entitled to full-scale hot-dip galvanizing, including hot-dip galvanized rod threads. The handling of our rod systems is such that you need neither special assembly work, sealing and encapsulation, nor time-consuming sales rep calls. We continue to guarantee maximum product safety, the highest quality and excellent workmanship. Please compare the quality standards and not just the price. We wish you much pleasure and success with BESISTA now and in the future. Your BESISTA team from Bad Boll, Germany Web-EN-Begrüssung-17.05.14
LGA Bridge, Neu-Ulm, DE Potsdamer Platz, Berlin, DE Olympic stadium, Sochi, RU -POPULOUS PwC Parkside, Zürich, CH Metropol Parasol, Sevilla, www.besista.com Tension rod systems and compression struts for architecture and civil engineering Velodrom, Aigle, CH BESISTA rod systems BESISTA International GmbH Heckenweg 1 DE-73087 Bad Boll Germany Tel: +49(0)7164/91239-0 Fax: +49(0)7164/91239-17 E-Mail: Info@besista.com Velodrom, Aigle, CH www. besista. com Red Bull Arena, Leipzig, DE Central Stadium Bata Eq. Guinea Europoles Konin, PL Skywalk, Rügen, DE Skywalk, Scheidegg, DE Werb-Mail-EN-Bildseite-05.03.14
BESISTA Betschart-Sicherheits-Stabsysteme (Betschart safety rod systems) are designer products with hot-dip galvanized rod threads. More comprehensive details, all drawings, the approval and type stress analysis are available at www.besista.com or can be requested at info@besista.com. Limit tensile forces N R,d in kn for BESISTA 540 (for limit compressive forces see Navi - Design loads ) Material combination 1 made of S540N, an extra-high-quality modified S460N with a guaranteed yield strength of 540 N/mm², is BESISTA standard and must be exclusively supplied by BESISTA International GmbH. Material combinations 4 and 5 contain the limit tensile forces of lower-strength tension rods, gusset plates and circular discs made of standard steel grades, for cases where customers produce the tension rods themselves and purchase only the ETAapproved rod anchors from BESISTA. The installation instructions must be adhered to in all cases. Material combinations M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 M33 M36 M39 M42 M45 M48 M52 M56 M60 M64 M68 M72 M76 1 Standard S540N (Re 540) S355 2 3 4 5 ETA-08/0038 DIBt Berlin S540N (Re 540) GJS-400-15 S540N (Re 540) S355 (Re 355) (Re 235) BESISTA Key Technical Data 0672-CPD-0091 19 31 43.7 59.6 81.4 100 127 157 183 238 291 360 424 506 581 677 764 911 1053 1225 1387 1584 1796 2016 16.4 27.3 40.9 57.3 81.4 92 123 135 164 203 256 338 368 465 501 614 655 798 955 1125 1200 1391 1596 1814 15.4 25.6 38.5 53.8 76.9 86.5 110 121 148 182 230 304 331 419 451 552 589 686 821 968 1032 1197 1372 1560 12.4 19.6 28.5 38.9 53.1 65.3 82.9 102 120 155 190 235 277 330 379 442 499 595 687 799 906 1034 1172 1317 9.5 15 21.9 29.8 40.7 50 63.5 77.8 91.5 117 145 175 208 244 271 311 354 415 481 553 629 710 796 887 Example with cover sleeve Rod anchor (fork head) Tension rod MPA Stuttgart Example without cover sleeve BESISTA tension rod systems Suspension ring for solid rod min. 40 Extension sleeve for any length beyond 15 m min. 50 Cross anchor Tensioning sleeve for controlled tensioning Suspension ring for coupler Circular disc Dimensions in mm for BESISTA 540 Thread sizes M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 M33 M36 M39 M42 M45 M48 M52 M56 M60 M64 M68 M72 M76 Tension rods Ø d 8 10 12 14 16 18 20 22 24 27 30 33 36 39 42 45 48 52 56 60 64 68 72 76 Rod anchors Gusset plates Circular discs Machined compression rod connection (solid rod) Compression rod connection one-part for tube Compression rod connection two-part (tube) or timber with higher-strength threaded bolts Ø d1 Z 8 10 12 14 16 18 20 22 24 27 30 33 36 39 42 45 48 52 56 60 64 68 72 76 Ø d1 D 1) 10 12 14 16 18 20 22 24 27 30 33 36 39 42 45 48 52 56 60 64 68 72 76 80 V 2) 14 16 18 20 22 26 28 30 36 40 44 46 50 54 58 64 70 74 80 84 92 96 100 108 L6 3) 23 28 32 37 42 46 51 57 63 71 78 83 92 98 107 114 125 137 146 155 167 177 185 195 w2 (t) 6 8 10 12 15 15 18 18 20 22 25 30 30 35 35 40 40 45 50 55 55 60 65 70 c2 min 28 35 41 47 52 57 62 70 75 85 93 99 112 117 130 136 153 167 175 187 203 214 224 244 Ø d2 Z 8,5 11 13 15 17 19 21 23 25 28 31 34 37 40 43 46 50 54 58 62 66 70 74 78 Ø d2 D 10,5 13 15 17 19 21 23 25 28 31 34 37 40 43 46 49 54 58 62 66 70 74 78 82 L5 4) 16 20 23 27 31 34 37 42 45 51 56 60 67 71 78 82 91 100 106 113 122 129 135 141 Ø Da 96 118 140 162 184 204 224 248 268 302 334 364 400 430 466 496 534 582 626 668 718 764 800 848 Ø Di 30 36 42 48 54 60 66 72 78 88 98 108 118 128 138 148 158 170 184 196 210 226 234 248 Ø Sm 64 78 94 108 122 136 150 164 178 200 222 244 266 288 310 332 354 382 414 442 474 506 530 566 Suspended rods Ø d 8 10 12 14 16 1) Larger pin diameters apply for compression rods: Ø d1 D for compression rods, Ø d1 Z for tension rods - see Navi - Technical data. 2) Max. adjustment length = 2xV 3) Rod length = system length -2xL6 4) L5 = Distance from centre of pin to plate edge Subject to modifications Protected by several patents Werb-Mail-EN-tech-Dat-05.03.14
BESISTA International GmbH DE 73087 Bad Boll Heckenweg 1 Tel +49 7164 9123 9-0 Fax -17 Info@besista.com www.besista.com ETA-08/0038 0672-CPD-0091/Bl14 Rod anchor Tension rod Enquiry BESISTA rod systems Order Customer:... with cover sleeves System length Street:... Location / post code:... Phone / Fax:... without cover sleeves Date:... Project. / No.:... Email:... Officer:... Permanently hot-dip galvanized tension rods with a durable zinc coat on the rod threads are a speciality of BESISTA. The quality of hotdip galvanized rod threads is far superior to brushed, sprayed or encapsulated black threads. The inspection hole in the rod anchors, which is unique to BESISTA, permits 100% inspection of the thread screw-in depth. Unlike with other systems, no cover sleeves are needed - see drawings above. BESISTA 540 tension rod systems under European technical approval ETA-08/0038, each consisting of 2 rod anchors (fork heads) made of EN-GJS-400-18-LT with cross-pins and locking rings and 1 tension rod with left-hand / right-hand thread and wrench flats, made of S540N, a high-quality modified S460N with guaranteed yield strength of 540 N/mm². Please always indicate: Limit tensile forces NR,d in kn determined for: deformation tensile force Steel grade according to statics: S355 S460 S540 black hot-dip galvanized with hot-dip galv. rod threads without cover sleeves with cover sleeves N R,d kn M (Ø) System length mm Quantity N R,d kn M (Ø) System length mm Quantity BESISTA circular discs made of S355 or BESISTA cross anchors made of EN-GJS-400-18-LT circular discs cross anchors black hot-dip galvanized for M (Ø) smallest angle Quantity for M (Ø) smallest angle Quantity.................................... BESISTA 540 compression rod connections - please send us a drawing with dimensions. Prices / payment: Ex-works, by haulage contractor commissioned by you, plus packaging and VAT (in Germany). Payment by arrangement. Delivery period: Tension rod systems black from one week, hot-dip galvanized from two weeks. The quotations are without obligation. We reserve the right to introduce technical modifications and amend prices. Errors and omissions excepted. We deliver subject to extended retention of title, i. e. the goods remain our property until they have been paid for in full. Claims for compensation will be limited to the net value of goods. Any complaints shall be subject to Sections 377, 378 of the German Commercial Code (HGB). German law shall apply whereas the CISG is waived. Place of performance and legal venue for both parties is Göppingen, Germany. Local Court Ulm HRB 532686 Vat ID No. DE 812 375 033 Signed:... Protected by several patents Werbung-Mailing-Inhalt-EN-Anfra-Best. 05.03.14
Safety Features - Sustainability higher with BESISTA required under approval The inspection hole in the rod anchors, which is unique to BESISTA, permits 100% inspection of the thread screw-in depth. Unlike with other systems, no cover sleeves are needed. The specially designed, internal shape of the fork ends allows the BESISTA rod anchors to accommodate axial offsets of up to 2. This prevents transverse stresses and protects coatings - a major benefit during installation. (patented) Filigree longitudinal ribs on the BESISTA rod anchors and smooth transitions from the straps to the shaft guarantee perfect forming and casting while at the same time serving as wrench flats. BESISTA rod anchors are made of top-grade highly ductile spheroidal graphite cast iron with guaranteed notched bar impact work at 20 C. No crack-prone steel casting. Wrench flats both on the tension rods and on the BESISTA rod anchors permit distortion-free tensioning. Sustainability by using hot-dip galvanized system parts. If hot-dip galvanized is specified, the client is entitled to insist on hot-dip galvanized threads. The hot-dip galvanized rod threads are unique to BESISTA. With BESISTA, no sealing or encapsulation (which can lead to uncontrollable thread areas) is necessary. Winner of German Galvanizers Award. European Technical Approvals and type stress analysis for all BESISTA rod systems and their components. Our tension rods are made of S540N, a high-quality modified S460N with guaranteed yield strength of 540 N/mm². Above-average safety margins in spite of filigree system components. Multiple safety inspections in our own manufacturing department. Continuous external surveillance and CE certification by the Materials Testing Institute Stuttgart (MPA Stuttgart). Quality Features - Ecology Highest quality standards thanks to expert in-house development and manufacture. Up to 45% material and energy savings through consistent optimisation. BESISTA cross anchors are provided exclusively by BESISTA. They allow contactfree crossing of tension rods and offer an elegantly crafted and sound structural solution for intersections. Also exclusively available from BESISTA are the cost-effective intermediate sizes M14, 18, 22, 33, 39, 45 and 68, providing 24 thread sizes from M8 to M76, with limit tensile forces up to 2016 kn. The smaller increments save a lot of material. Compression rod connections for compression rods made of steel or timber are available in three different types. Our compact, extra-light BESISTA pretensioning systems BVS-230kN and BVS-500kN permit rapid, controlled pretensioning of the tension rods. With the BVS-230, a tension of up to 230 kn can be applied by a single person in a few minutes. Very large adjustment lengths in the BESISTA rod anchors - at least three times the rod diameter per rod - offer enormous benefits during installation. Unlike sleeves with welded straps, the specially designed BESISTA suspension rings allow the tension rods to be turned and tensioned at all times. 04.05.14