Steel- and Tungsten Carbide Tools. REXID hand tools REXID pneumatic tools steel tools drills

Steel- and Tungsten Carbide Tools REXID hand tools REXID pneumatic tools steel tools drills

USA GranQuartz L.P. 4963 South Royal Atlanta Drive Tucker, GA. 30084 Fon 700-621-9777 Fax 700-621-9771 admin@granquartz.com www.granquartz.com Canada GranQuartz Canada Inc. 137 Junction St. Stanstead, Que J0B 3E4 Fon 819/876-7131 Fax 819/876-7223 granquartz@bellnet.ca www.granquartzcanada.com Germany J. König GmbH & Co Dieselstraße 2 76227 Karlsruhe Fon 0049 721/ 40905-0 Fax 0049 721/ 40905-33 info@j-koenig.de www.j-koenig.de Germany G. Schmieder GmbH & Co Julius-Hölder-Straße 8 70597 Stuttgart Fon 0049 711/13269-0 Fax 0049 711/13269-50 info@schmieder-online.de www.schmieder-online.de Australia CDK Stone Pty Ltd 4-6 Freighter Rd Moorabbin, Vic. 3189 Fon 03 8552/0000 Fax 03 8552/6001 enquiries@cdkstone.com.au www.cdkstone.com.au

Who is the? J. König GmbH&Co., Karlsruhe, Germany G. Schmieder GmbH&Co., Stuttgart, Germany CDK Stone Pty. Ltd., Melbourne, Australia GranQuartz L.P., Atlanta, USA GranQuartz Canada, Beebe, Canada The is comprised of five companies located in Germany, Australia, USA and Canada. The individual companies are the recognized leaders in supplying stone working tools and machinery for natural and engineered stone in their respective countries. The employs over 300 people and is active in researching. It is the 's initiave of supplying the best tools at competitive prices. The maintains substantial inventories in all the countries mentioned and has established sales and service networks in these same areas.

content 5.... REXID hand tools 9.... REXID hammers and stone axes 12.... REXID pneumatic tools 26.... REXID drills 29.... DUSS drills 31.... sharpening instructions 32.... steel hand tools 37.... steel hammers and stone axes 43.... steel pneumatic tools made in Germany The are developed and manufactured by König in Karlsruhe, Germany. 4

hand tools hard stone soft stone the name for: y high precision manufacturing y development based on practical experience y made of highest quality tungsten carbide y shaft material made of best quality steel y constant quality control for ultimate performance and long service life REXID brand a guarantee for highest quality. REXID lettering chisel y selectively square or octagonal shaft y for soft stone with very slim blade, very easy-cutting blade y for hard stone very sturdy version, wear-resistant tungsten carbide quality application cutting width shaft diameter head type length order no. order no. mm mm approx. mm square shaft octagonal shaft soft stone 6 6 mallet head 170 B 01.010 B 01.090 8 8 mallet head 170 B 01.020 B 01.100 10 10 mallet head 170 B 01.030 B 01.110 12 12 mallet head 170 B 01.040 B 01.120 14 14 mallet head 170 B 01.050 B 01.130 16 16 mallet head 170 B 01.060 B 01.140 hard stone 4 4 hammer head 170 B 01.250 B 01.350 6 6 hammer head 170 B 01.260 B 01.360 8 8 hammer head 170 B 01.270 B 01.370 10 10 hammer head 170 B 01.280 B 01.380 12 12 hammer head 170 B 01.290 B 01.390 14 14 hammer head 170 B 01.300 B 01.400 REXID carving chisel y with very slim tungsten blade y very easy cutting y made of octagonal shaft material, with mallet head application cutting width shaft diameter length order no. mm mm approx. mm soft stone 6 8 220 B 01.160 8 8 220 B 01.170 10 10 220 B 01.180 12 10 220 B 01.190 14 10 220 B 01.200 16 12 220 B 01.210 18 12 220 B 01.220 20 14 220 B 01.230 25 14 220 B 01.240 5

hand tools REXID chisels y for soft stone; slim shape, very easy cutting blade y for hard stone, sturdy version made of wear resistant tungsten carbide quality y ergonomic octagonal shape application cutting width shaft diameter head type length order no. mm mm approx. mm soft stone 16 14 mallet head 180 B 02.010 20 16 mallet head 190 B 02.020 25 18 mallet head 200 B 02.030 30 18 mallet head 200 B 02.040 40 18 mallet head 200 B 02.050 hard stone 12 12 hammer head 180 B 02.100 14 14 hammer head 180 B 02.110 16 16 hammer head 180 B 02.120 18 18 hammer head 180 B 02.130 20 18 hammer head 180 B 02.140 22 20 hammer head 180 B 02.160 25 20 hammer head 190 B 02.170 30 20 hammer head 190 B 02.180 40 22 hammer head 190 B 02.190 REXID universal chisel y sturdy chisel made of octagonal steel with tungsten carbide blade, for hard and soft stone. hard stone soft stone application cutting width shaft diameter head type length approx. order no. mm mm mm hard and 20 18 hammer head 180 B 02.240 soft stone 25 20 hammer head 180 B 02.270 30 20 hammer head 180 B 02.280 REXID masonry claw chisel y for very fine clawing of pre-pared profiles and surfaces y for sand stone, limestone and marble y with very slim teeth y tooth interval: 4,5 mm y with octagonal shaft approx. 220 mm long, with mallet head application cutting width teeth tooth shaft diameter order no. mm shape mm soft stone 6 2 flat 10 B 03.010 10 3 flat 10 B 03.020 12 3 flat 12 B 03.030 15 4 flat 12 B 03.040 20 5 flat 14 B 03.050 25 6 flat 14 B 03.060 6

hand tools REXID claw chisel y two types: with pointed or flat teeth y tooth interval: 5 mm y with octagonal shaft approx. 220 mm long, with mallet head application cutting width teeth tooth shaft diameter order no. mm shape mm marble and 15 4 pointed 16 B 03.080 limestone 20 5 pointed 18 B 03.090 30 7 pointed 18 B 03.100 sandstone 18 4 flat 16 B 03.120 22 5 flat 18 B 03.130 33 7 flat 18 B 03.140 REXID cleavers y two shapes: with slim or sturdy blade y ergonomic shape, approx. 200 mm long with mallet head application cutting width shape order no. mm sand stone and 50 light B 04.010 soft lime stone 60 light B 04.020 80 light B 04.030 100 light B 04.040 120 light B 04.050 140 light B 04.060 medium hard 40 strong B 04.070 lime stone, 60 strong B 04.080 marble, Diabas 80 strong B 04.090 100 strong B 04.100 120 strong B 04.110 REXID pitchers y four different shapes: light, medium, heavy with square shaft, heavy with oval shaft y with different blade angles y with hammer head application cutting blade shape blade- length shaft diameter order no. width mm angle approx. mm mm sand stone, marble, 25 light 80 175 18 B 05.010 lime stone, 40 light 80 175 18 B 05.020 cast stone 70 light 80 210 22 B 05.030 sand stone, marble, 30 medium 90 210 22 B 05.040 lime stone, 40 medium 90 210 22 B 05.050 50 medium 90 210 22 B 05.060 hard stone 40 heavy 85 210 25 B 05.070 50 heavy 85 210 25 B 05.080 50 heavy, with 85 190 34/25 B 05.100 oval shaft 7

hand tools REXID scoring and splitting tool y with special tungsten carbide blade y tapered edges y ideal for splitting and scoring of stratified granite application cutting width length shaft diameter head type order no. mm approx. mm mm hard stone 60 200 22 hammer head B 05.140 80 200 22 hammer head B 05.150 100 200 22 hammer head B 05.160 REXID pointed chisel y with tungsten carbide tip y slim shape y very handy octagonal shaft, approx. 220 mm long application shaft diameter head type order no. mm soft stone 10 mallet head B 06.010 12 mallet head B 06.020 14 mallet head B 06.030 REXID pointed lettering chisel y with tungsten carbide points y with square or octagonal shaft, approx. 170 mm long application shaft diameter head type order no. order no. mm square shaft octagonal shaft all stone types 8 hammer head B 06.040 B 06.050 10 hammer head B 06.060 B 06.070 REXID points y with very wear resistant tungsten carbide point y octagonal shaft made of high quality tool-steel application shaft diameter length tungsten carbide-stift head type order no. mm mm ø mm all stone types 12 180 4,5 x 20 hammer head B 06.080 14 180 6,5 x 25 hammer head B 06.090 16 190 6,5 x 25 hammer head B 06.100 18 200 8,0 x 28 hammer head B 06.110 18 250 8,0 x 28 hammer head B 06.130 20 200 8,0 x 28 hammer head B 06.150 18 flat point 200 10,0 x 28 hammer head B 06.140 20 flat point 200 10,0 x 28 hammer head B 06.160 22 flat point 200 10,0 x 28 hammer head B 06.170 REXID punch y with extremely strong tungsten carbide point y sturdy octagonal shaft application shaft diameter length tungsten point head type order no. mm mm ø mm all stone types 24 200 12 x 28 hammer head B 06.180 8

hammers and stone axes REXID hand scoring hammer y for dressing and splitting of hard stone y hammer is set onto the stone and hit with a 2 kg steel hammer y handle included application blade- weight length approx. order no. order no. order no. width mm g mm spare handle safety wedge hard stone 35 1000 150 B 07.010 E 01.070 E 01.380 REXID chipping hammer, single blade y application: for dressing of rough-cut hard stone, not applicable for use as granite setting hammer y for extreme load, with inclined tungsten carbide plate y with sturdy tungsten carbide blade y hammer body made of wear resistant special steel y additional welding joints for higher wear resistance y handle included application cutting width weight order no. order no. order no. mm g chipping hammer spare handle safety wedge hard stone 40 1500 B 07.020 E 01.070 E 01.380 45 1700 B 07.025 E 01.070 E 01.370 45 2000 B 07.030 E 01.070 E 01.380 for extreme 40 1500 B 07.022 E 01.070 E 01.380 load 50 2000 B 07.035 E 01.070 E 01.380 REXID chipping hammer, double blade y with two sturdy tungsten carbide blades y other features see REXID chipping hammer, single blade application cutting width weight order no. order no. order no. mm g chipping hammer spare handle safety wedge hard stone 40 (two-sided) 1100 B 07.015 E 01.070 E 01.380 45 (two-sided) 1500 B 07.032 E 01.070 E 01.380 for extreme 40 (single-sided) 1100 B 07.017 E 01.070 E 01.380 load 50 (single-sided) 1700 B 07.037 E 01.070 E 01.380 REXID setting hammer y for economic splitting of hard natural stone: the setting hammer is positioned onto the stone. Afterwards, the stone is being split by hitting a sledge hammer onto the setting hammer. y spring-mounted head, with steel-handle 80 cm long. application width mm weight g order no. natural stone 50 1200 B 07.070 9

hammers and stone axes REXID lump hammer, double blades y two blades with strong tungsten carbide plates y made of wear-resistant special steel y additional wear protection behind the tungsten carbide blades y handle included y application: for dressing of natural stone paving stones, boss stones, pedestal pieces, rough plates et al. application blade weight length approx. order no. order no. order no. width mm g mm spare handle safety wedge hard stone 40 (two sided) 800 80 B 07.040 E 01.070 E 01.380 REXID stone axe y forged hammer body with two tungsten carbide blades y handle included y application: creating of structures in sand stone, marble and lime stone application blade- weight length approx. order no. order no. order no. width mm g mm stone axe spare handle safety wedge soft stone 40 1500 220 B 08.010 E 01.060 E 01.380 REXID carving pick y precision-forged hammer body with tungsten carbide points y handle included application weight length approx. order no. order no. order no. g mm carving pick spare handle safety wedge soft stone 800 190 B 08.020 E 01.055 E 01.370 REXID stone axe y with flat teeth and blade for sand stone y both sides with tungsten carbide blade for sand stone and lime stone y with pointed teeth and blade for lime stone y precision-forged body y handle included application blade teeth shape weight approx. order no. order no. width mm g spare handle sand stone 60 6 flat teeth/ 1300 B 08.040 E 01.080 blade 80 7 flat teeth/ 1600 B 08.050 E 01.080 blade 100 9 flat teeth/ 1700 B 08.060 E 01.080 blade sand stone 60 - blade 1300 B 08.080 E 01.080 and lime stone two sided 80 - blade 1600 B 08.090 E 01.080 two sided 100 - blade 1700 B 08.100 E 01.080 two sided lime stone 60 8 pointed teeth/ 1300 B 08.160 E 01.080 blade 80 9 pointede teeth/ 1600 B 08.170 E 01.080 blade 10

hammers and stone axes REXID bush hammer y one side equipped with tungsten carbide round points y hammer body made of hardened and tempered square steel y handle included application size teeth weight approx. order no. order no. order no. mm g spare handle spare wedge hard stone 20 x 20 9 420 B 09.120 E 01.055 E 01.370 20 x 20 16 440 B 09.130 E 01.055 E 01.370 25 x 25 9 600 B 09.100 E 01.010 E 01.370 25 x 25 16 600 B 09.110 E 01.010 E 01.370 30 x 30 9 1200 B 09.060 E 01.055 E 01.370 30 x 30 16 1200 B 09.070 E 01.060 E 01.370 40 x 40 9 1800 B 09.010 E 01.070 E 01.370 40 x 40 16 1800 B 09.020 E 01.070 E 01.370 40 x 40 25 1800 B 09.030 E 01.070 E 01.370 40 x 40 36 1800 B 09.040 E 01.070 E 01.370 REXID riffling hammer y one side equipped with tungsten carbide plates y hammer body made of hardened and tempered square steel y handle included application size no. of weight order no. order no. order no. mm blades approx g spare handle safety wedge hard stone 30 x 30 4 1200 B 09.160 E 01.060 E 01.380 40 x 40 5 1800 B 09.150 E 01.070 E 01.380 sculpturing bush hammer y 25 x 25 mm bushing surface, for REXID bush hammer heads y 15 mm attachment bore and clamping screw y handle included order no. patent bush hammer B 09.170 clamping screw B 09.180 spare handle E 01.060 safety wedge E 01.380 REXID bush hammer head y with tungsten carbide moulded plate y for sculpturing bush hammer application size mm teeth order no. hard stone 25 x 25 25 B 09.200 25 x 25 36 B 09.210 25 x 25 49 B 09.220 REXID riffling head y with tungsten carbide moulded plate y for sculpturing bush hammer application size mm no. of rows order no. hard stone 25 x 25 5 B 09.230 11

pneumatic tools shaft sizes y all REXID tools are manufactured with ultimate precision y developed according to highest quality standards y precision and dimensional accuracy of shafts and chisel sockets are decisive for optimum performance and life time of tools and pneumatic hammers shaft- fitting for pneumatic hammer type application comments on sockets shank measu form 7 Frölich+Klüpfel FK 700, 701, 711, 713, 714, 715 lettering and favourable measure proportion RM 04, 05, 14, 15 sculpturing of socket and tool size Deprag ZN 23, 231P, 12P -recommended- Bavaria GS 40, 45, 50 Drema WHS 40, 50, 105, 155, 206, 206 R 8 Frölich+Klüpfel FK 702.4, 702.5, 703.4, 703.5 bushing, riffling, risk of breakage for shafts Deprag ZN 24, 26, 28 pointing, edging due to worn chisel sockets Demag Bavaria H 180, 190, M 13, 23 GS 15 notching on small surfaces -recommendation: shaft 10-10 König 9212, 9316 bushing, riffling, we recommend conical sockets for Frölich+Klüpfel FK 702, 702.4, 702.5, 703, pointing, edging all tools with medium and 703.4, 703.5 notching heavy pneumatic hammers, Deprag ZN 24 since risk of breakage is minimal. Demag H 180, 190, M 13, 23 Bavaria GS 15, 19, 20 Böhler M 15, BM 19, BM 20 Chicago CP 9310, 9311, 9315, 711, 715 Drema WSH 3 Pneutec P 44, VT 13 FHK, VT 23 FHK 11 Frölich+Klüpfel FK 702, 702.4, 702.5, 703, medium heavy to hardly any risk of shaft breakage 703.4, 703.5, FK 3.2, FK 4.2 heavy stone -highly recommended- Deprag MFK 10 masonry work Demag H21e, S2010, S2011, M48, M52, S2020, S2021 Böhler BM 19, 20, 119, 35 Bavaria GS 15, 19, 20 12 Frölich+Klüpfel FK 720, 5.2 heavy stone hardly any risk of shaft breakage Deprag MFK 10 masonry work -highly recommended- Demag H21e, S2010, S2011, M48, M52, S2020, S2021 Böhler BM 41, 51, 56, 66 Bavaria GS 21 13 B Frölich+Klüpfel KM 30 wedging chisel, -approved tool socket- Böhler KL 69, 70, 71, M41K, M51K, heavy pointing-, M61K, M56, M66, 5-B, 6-B bushing- and riffling- Krupp 341, 342, 343 works Bavaria GS 21, M 7 14 Frölich+Klüpfel FK 701, 702, 702.4, 702.5, 703, lettering- and for lettering- and punching 703.4, 703.5, 711 sculpturing works minimum risk of breakage for Bavaria GS 25, 50 sockets Cuturi A, V, U, T, S, R Atlas Copco BHV 12, 16, 22 Böhler BK 181, 241 70 König 79312 G medium heavy risk of breakage for sockets due to Chicago CP 710, 711G, 910, 9310G, sculpturing- and worn out hammer sockets. 9311G stone mason's works better: schaft form 10 Böhler M15 -socket not recommendable- Bavaria GS 50 Black&Decker 6216 12

pneumatic tools res REXID pneumatic chisels shaft 7, 14 y for soft stone, very slim blade, very high cutting performance y for hard stone, sturdy shape, wear resistant tungsten carbide quality y shaft 7, square shaft, approx.190 mm long y in shaft 14 with octagonal shaft, approx. 210 mm long application cutting width shaft diameter shaft diameter order no. order no. shaft form 7 shaft form 14 shaft form 7 shaft form 14 mm mm mm soft stone 6 10 6 B 11.010 B 12.010 8 10 10 B 11.020 B 12.020 10 10 10 B 11.030 B 12.030 12 10 10 B 11.040 B 12.040 14 10 10 B 11.050 B 12.050 16 10 10 B 11.060 B 12.060 18 10 10 B 11.070 B12.070 hard stone 4 8 8 B 11.120 B 12.100 6 10 8 B 11.130 B 12.110 8 10 8 B 11.140 B 12.120 10 10 10 B 11.150 B 12.130 12 10 10 B 11.160 B 12.140 14 10 10 B 11.170 B 12.150 16 10 10 B 11.180 B 12.160 18 10 10 B 11.190 B12.170 20 10 10 B 11.200 B12.180 REXID plus pneumatic lettering chisel shaft 7 y with air circulation y faster working progress due to constantly free sight y sensitive and high performance working in connection with high frequency pneumatic chisel hammers y square shaft application cutting width shaft diameter length order no. mm mm hard stone 6 10 190 B 11.710 8 10 190 B 11.720 10 10 190 B 11.730 12 10 190 B 11.740 14 10 190 B 11.750 16 10 190 B 11.760 18 10 190 B 11.770 20 10 190 B 11.780 13

pneumatic tools REXID ERGO pneumatic lettering chisel shaft 7 y with rubber sleeve for ultimate working comfort y for granite y wrist and finger-joints are protected due to minimized vibration y no heating of tool, permits higher productivity also for ornament works y square shaft application cutting width shaft diameter length order no. mm mm mm hard stone 4 10 190 B 11.810 6 10 190 B 11.820 8 10 190 B 11.830 10 10 190 B 11.840 12 10 190 B 11.850 14 10 190 B 11.860 16 10 190 B 11.870 18 10 190 B 11.880 20 10 190 B 11.890 REXID pneumatic lettering chisel SPEZIAL shaft 7 y free-standing tungsten carbide precision plate y for finishing of specially deep letters and reliefs y made of octagonal steel application cutting width shaft diameter length order no. mm mm mm soft stone 8 8 195 B 11.090 10 10 195 B 11.100 12 10 195 B 11.110 REXID Protect-lettering chisel shaft 7 y developed to fit Protect-System by F + K y for optimum vibration- and heat protection y made of alloyed tool-steel with ground tip y easy cutting tungsten carbide quality application cutting width length order no. mm mm hard stone 4 200 B 13.100 6 200 B 13.110 8 200 B 13.120 10 200 B 13.130 12 200 B 13.140 14

pneumatic tools REXID pneumatic sculpturing chisel shaft 7, 14 y with specially slim tungsten blade y made of precision-forged octagonal steel y for sculpturing hammers and light pneumatic hammers application cutting width shaft diameter length order no. order no. mm mm mm shaft form 7 shaft form 14 soft stone 6 10 260 B 15.010 B 16.010 8 10 260 B 15.020 B 16.020 10 10 260 B 15.030 B 16.030 12 10 260 B 15.040 B 16.040 16 12 260 B 15.050 B 16.050 20 14 260 B 15.060 B 16.060 25 14 260 B 15.070 B 16.070 REXID pneumatic chisel light shaft 7, 14 y slim tungsten carbide blade y very easy cutting tungsten carbide quality y made of octagonal steel, approx. 210 mm long y for light pneumatic hammers application cutting width steel thickness length order no. order no. mm mm mm shaft form 7 shaft form 14 soft stone 16 16 210 B 21.010 B 22.010 20 16 210 B 21.020 B 22.020 25 16 210 B 21.030 B 22.030 30 16 210 B 21.040 B 22.040 40 16 210 B 21.050 B 22.050 hard stone 14 14 210 B 21.060 B 22.100 16 16 210 B 21.070 B 22.110 20 16 210 B 21.080 B 22.120 25 16 210 B 21.090 B 22.130 REXID pneumatic chisel strong shaft 8, 10 y with sturdy tungsten carbide blade in proved quality y made of octagonal steel, approx. 200 mm long y for medium heavy pneumatic hammers application cutting width shaft diameter length order no. order no. mm mm mm shaft form 8 shaft form 10 soft stone 20 18 200 B 24.010 B 25.010 25 18 200 B 24.020 B 25.020 30 18 200 B 24.030 B 25.030 40 18 200 B 24.040 B 25.040 hard stone 16 16 200 B 24.060 B 25.060 18 18 200 B 24.070 B 25.070 20 18 200 B 24.080 B 25.080 25 18 200 B 24.090 B 25.090 15

pneumatic tools REXID ERGO pneumatic chisel shaft 10 y with rubber sleeve for ultimate working comfort y for granite y wrist and finger-joints are protected due to minimized vibration y no heating of tool, permits higher productivity also for ornament works application cutting width shaft diameter shaft form order no. mm mm mm hard stone 16 16 10 B 28.500 18 18 10 B 28.510 20 18 10 B 28.520 25 18 10 B 28.530 REXID pneumatic chisel, heavy shaft 11, 12 y with strong tungsten carbide plate y made of octagonal steel y for heavy pneumatic hammers application cutting width shaft diameter length order no. order no. mm mm mm shaft form 11 shaft form 12 hard stone 22 22 240 B 26.010 B 28.010 25 22 240 - B 28.020 30 22 240 B 26.030 B 28.030 REXID pneumatic broad chisel shaft 13B y for rough dressing works, with strong, semicircular tungsten carbide blade y made of hardened and tempered octagonal steel y for medium heavy chisel hammers, not applicable for heavy chisel hammers application cutting width shaft diameter length order no. mm mm mm hard stone 20 22 150 B 29.010 25 24 150 B 29.020 REXID pneumatic scorer shaft 13B y equipped with specially strong tungsten carbide plate, semicircular shape y stabile shaft, short form y for scoring and splitting with medium heavy chisel hammers application cutting width length order no. mm mm hard stone 30 150 B 29.030 REXID pneumatic cleaver shaft 10 y light shape with slim tungsten carbide blade y shaft made of forged octagonal steel application cutting width shaft diameter length order no. mm mm mm sand stone 60 20 280 B 33.010 80 20 280 B 33.020 16

pneumatic tools REXID pneumatic claw chisel shaft 7 y with very slim forged tungsten carbide teeth y 4,5 mm tooth interval y made of precision-forged octagonal steel y only for sculpturer's hammers and light lettering hammers y for fine tuning of prepared profiles and surfaces application cutting width teeth steel thickness length order no. mm mm mm soft stone 6 2 10 260 B 40.010 10 3 10 260 B 40.020 12 3 12 260 B 40.030 15 4 12 260 B 40.040 20 5 14 260 B 40.050 24 6 14 260 B 40.060 REXID pneumatic claw chisel shaft 7, 14 y with tungsten round teeth y 5 mm tooth interval y made of octagonal tool-steel Ø 16 mm y for light pneumatic hammers application cutting width teeth tooth length order no. order no. mm shape mm shaft form 7 shaft form 14 sand stone 12 3 flat 210 B 35.010 B 37.010 17 4 flat 210 B 35.020 B 37.020 22 5 flat 210 B 35.030 B 37.030 lime stone 10 3 pointed 210 B 35.040 B 37.040 15 4 pointed 210 B 35.050 B 37.050 20 5 pointed 210 B 35.060 B 37.060 REXID pneumatic claw chisel shaft 8, 10 y with tungsten carbide points y 5 mm tooth interval y made of octagonal tool-steel Ø 18 mm y for medium heavy pneumatic hammers application cutting width teeth tooth length shaft form order no. mm mm shape mm sand stone 23 5 flat 220 8 B 38.010 33 7 flat 220 8 B 38.020 sand stone 23 5 flat 220 10 B 39.010 33 7 flat 220 10 B 39.020 lime stone 20 5 pointed 220 8 B 38.030 30 7 pointed 220 8 B 38.040 lime stone 20 5 pointed 220 10 B 39.030 30 7 pointed 220 10 B 39.040 17

pneumatic tools REXID pneumatic split tooth chisel shaft 10 y with strong teeth, equipped with tungsten carbide points 4,5 mm Ø y octagonal shaft Ø18 mm y ideal for dressing of surfaces in sand stone and marble application interval between length order no. teeth mm mm sand stone and marble 14 210 B 39.050 REXID pneumatic pointed chisel shaft 7, 14 y equipped with tungsten carbide points y tools with shaft 7 made of square steel y tools with shaft 14 made of octagonal steel application steel thickness length tungsten point shaft form order no. mm mm ø mm all stone types 8 x 8 190 3,8 x 20 7 B 45.010 10 x 10 190 4,5 x 20 7 B 45.020 all stone types 8/oct. 210 3,8 x 20 14 B 49.010 10/oct. 210 4,5 x 20 14 B 49.020 REXID ERGO pneumatic pointed lettering chisel shaft 7 y with rubber sleeve for highest working comfort y for granite y wrist and finger-joints are protected due to minimized vibration y no heating of tool, permits higher productivity also for ornament works application shaft thickness length tungsten carbide shaft form order no. mm mm point ø mm all stone types 10 x 10 190 4,5 x 20 7 B 45.025 REXID Protect pointed lettering chisel shaft form 7 y developped for Protect-System by F + K y for optimum vibration- and heat protection y made of alloyed tool-steel with very easy-cutting tungsten carbide quality y ground guiding surface application steel thickness length tungsten carbide shaft form order no. mm mm point ø mm all stone types 12 200 4,5 x 20 7 B 45.050 18

pneumatic tools REXID pneumatic pointed chisel shaft 7, 14 y with strong tungsten round point, very wear resistant quality y made of well-proven octagonal steel application steel thickness length tungsten point shaft form order no. mm mm ø mm all stone types 12 200 4,5 x 20 7 B 45.030 14 230 6,5 x 25 7 B 45.040 all stone types 14 230 6,5 x 25 14 B 49.025 16 230 6,5 x 25 14 B 49.030 18 230 6,5 x 25 14 B 49.040 REXID pneumatic pointed chisel shaft 8, 10, 11 y for medium heavy chisel hammers y with very strong tungsten carbide round point y made of wear resistant octagonal steel application steel thickness length tungsten carbide shaft form order no. mm mm point ø mm all stone types 16 230 6,5 x 25 8 B 48.010 18 240 8,0 x 28 8 B 48.020 all stone types 16 230 6,5 x 25 10 B 47.010 18 240 8,0 x 28 10 B 47.020 18 heavy duty 200 10,0 x 28 10 B 47.030 all stone types 20 240 8,0 x 28 11 B 51.010 20 heavy duty 200 10,0 x 28 11 B 51.015 REXID ERGO pneumatic pointed chisel shaft 10, 11 y with rubber sleeve for highest working comfort y wrist and finger-joints are protected due to minimized vibration y no heating of tool, permits higher productivity application steel thickness length tungsten carbide shaft form order no. mm mm point ø mm all stone types 16 230 6,5 x 25 10 B 47.100 18 240 8,0 x 28 10 B 47.110 18 heavy duty 240 8,0 x 28 10 B 47.120 all stone types 20 240 8,0 x 28 11 B 51.100 20 heavy duty 240 8,0 x 28 11 B 51.110 REXID pneumatic punch shaft 11, 12, 13B y massive tungsten carbide-insert Ø 12 x 28 mm, flat ground tip y wear resistant quality y made of tempered octagonal steel y for heavy duty works in medium chisel hammers application steel thickness length shaft form order no. mm mm all stone types 24 240 11 B 51.020 24 240 12 B 52.020 24 240 13 B B 53.010 19

pneumatic tools REXID pneumatic bush hammer shaft 7 y equipped with tungsten carbide plates y made of square profile steel y very suitable for creating letters and ornaments and for fine sculpturing works application hammer face teeth interval between length order no. mm teeth mm mm all stone types 10 x 2,5 4 2,5 190 B 60.010 10 x 5 8 2,5 190 B 60.020 10 x 10 9 3,3 190 B 60.030 10 x 10 16 2,5 190 B 60.040 all stone types 12 x 3 4 3,0 190 B 60.050 12 x 6 8 3,0 190 B 60.060 12 x 8 6 4,0 190 B 60.070 12 x 12 9 4,0 190 B 60.080 12 x 12 16 4,0 190 B 60.090 all stone types 14 x 14 9 4,7 190 B 60.120 14 x 14 16 3,5 190 B 60.130 14 x 14 25 2,8 190 B 60.140 all stone types 20 x 20 9 6,5 190 B 60.200 20 x 20 16 4,7 190 B 60.210 20 x 20 25 3,8 190 B 60.220 20 x 20 36 3,0 190 B 60.230 REXID ERGO pneumatic bush hammer shaft 7 y with rubber sleeve for ultimate working comfort y wrist and finger-joints are protected due to minimized vibration y no heating of tool, permits higher productivity also for ornament work y suitable for any pneumatic lettering- and ornament hammer y equipped with tungsten carbide plates y made of square profile steel application hammer face teeth interval between length order no. mm teeth mm all stone types 10 x 10 9 3,3 190 B 60.032 REXID Protect bush hammer shaft 7 y developed for Protect-System by F + K y for optimum vibration- and heat protection y equipped with tungsten carbide plates y ground guiding surface application hammer face teeth interval between length order no. mm teeth mm mm all stone types 10 x 10 9 3,3 200 B 60.500 10 x 10 16 2,5 200 B 60.510 20

pneumatic tools REXID pneumatic bush hammers shaft 14 y equipped with tungsten carbide round tips or tungsten carbide plates in wear resistant quality y shaft made of tempered tool-steel, short shape approx. 90 mm long, long shape approx.190 mm application hammer face teeth interval between equipment shape order no. mm teeth mm shaft form 14 all stone types 14 x 14 9 4,7 moulded plate short B 62.060 14 x 14 16 3,5 moulded plate short B 62.070 14 x 14 9 5 moulded plate long B 62.010 14 x 14 25 3 moulded plate long B 62.030 all stone types 20 x 20 5 10/7 round point short B 62.155 20 x 20 9 6,5 moulded plate short B 62.160 20 x 20 16 4,7 moulded plate short B 62.180 20 x 20 25 3,8 moulded plate short B 62.190 all stone types 25 x 25 9 7,0 round point short B 62.280 25 x 25 16 5,2 round point short B 62.290 25 x 25 25 4,8 moulded plate short B 62.300 REXID pneumatic bush hammer shaft 8, 10 y equipped with tungsten carbide round points or tungsten carbide moulded plates y made of tempered tool-steel, approx. 190 mm long application hammer face teeth interval between equipment order no. order no. mm teeth mm shaft form 8 shaft form 10 all stone types 20 x 20 16 4,1 moulded plate B 64.020 B 65.020 20 x 20 25 3,9 moulded plate B 64.030 B 65.030 all stone types 25 x 25 9 6,8 round point - B 65.070 25 x 25 16 5,0 round point - B 65.080 25 x 25 16 5,8 moulded plate - B 65.085 25 x 25 25 4,8 moulded plate B 64.090 B 65.090 25 x 25 36 4,0 moulded plate B 64.100 B 65.100 25 x 25 49 3,5 moulded plate - B 65.110 REXID pneumatic bush hammer shaft 11, 12 y equipped with tungsten carbide round-points or tungsten carbide moulded plates y made of tempered tool-steel, approx. 190 mm long application hammer face teeth interval between equipment order no. order no. mm teeth mm shaft form 11 shaft form 12 all stone types 30 x 30 9 8,5 round point B 66.010-30 x 30 16 6,3 round point B 66.020-30 x 30 25 5,0 round point B 66.030-30 x 30 36 4,6 moulded plate B 66.040-30 x 30 64 3,5 moulded plate B 66.050 - all stone types 40 x 40 9 11,0 round point B 66.110 B 68.020 40 x 40 16 9,0 round point B 66.120 B 68.030 40 x 40 25 7,0 round point B 66.130 B 68.040 40 x 40 36 5,8 moulded plate - B 68.050 40 x 40 64 5,0 moulded plate - B 68.060 21

pneumatic tools REXID ERGO pneumatic bush hammer shaft form 10, 11 y with rubber sleeve for ultimate working comfort y wrist and finger-joints are protected due to minimized vibration y no heating of tool, permits higher productivity also for ornament work y equipped with tungsten carbide round-point or tungsten carbide moulded plate y made of tempered tool-steel, approx. 190 mm long application hammer face teeth interval between equipment shaft form order no. mm teeth mm all stone types 25 x 25 9 6,8 round point 10 B 65.200 25 x 25 16 5,0 round point 10 B 65.210 25 x 25 25 4,8 moulded plate 10 B 65.220 25 x 25 36 4,0 moulded plate 10 B 65.230 25 x 25 49 3,5 moulded plate 10 B 65.240 all stone types 30 x 30 9 8,5 round point 11 B 66.060 30 x 30 16 6,3 round point 11 B 66.070 30 x 30 25 5,0 round point 11 B 66.080 30 x 30 36 4,6 moulded plate 11 B 66.090 30 x 30 64 3,5 moulded plate 11 B 66.100 all stone types 40 x 40 9 11,0 round point 11 B 66.500 40 x 40 16 9,0 round point 11 B 66.510 40 x 40 25 7,0 round point 11 B 66.520 REXID pneumatic bush hammer short form, shaft 13B y equipped with tungsten carbide round-point or tungsten carbide moulded plate y shaft made of tempered tool-steel, approx. 150 mm long y for medium-heavy chisel hammers y for processing large-surface work pieces application hammer face teeth interval between equipment order no. mm teeth mm all stone types 40 x 40 9 11,0 round point B 69.230 40 x 40 16 9,0 round point B 69.260 40 x 40 25 7,0 round point B 69.270 40 x 40 36 5,8 round point B 69.300 40 x 40 64 5,0 moulded plate B 69.310 40 x 40 100 3,8 moulded plate B 69.320 REXID machine bush hammer with rim y equipped with tungsten carbide round points, short shape, approx. 115 mm long y with hand-turned precision shank ø 16 x 55 mm y for use in automatic bushing machines y for processing of workpieces with large surface application bush hammer face teeth interval between equipment order no. mm teeth mm all stone types 35 x 35 8 12,0 round point B 70.100 35 x 35 16 7,5 round point B 70.110 35 x 35 24 6,0 round point B 70.120 35 x 35 36 4,8 round point B 70.130 all stone types 40 x 40 8 12,5 round point B 70.150 22

pneumatic tools tungsten pneumatic bush hammers REISSER y equipped with tungsten round points y shaft made of tool-steel y socket end 19/hex. x 50 mm y for use in REISSER bush-hammer- and riffling device application hammer face teeth interval between equipment length order no. mm teeth mm mm all stone types 40 x 40 4 20 round point 90 B 71.010 40 x 40 8 13 round point 90 B 71.020 40 x 40 16 9 round point 90 B 71.030 40 x 40 24 6 round point 90 B 71.040 40 x 40 36 5 round point 90 B 71.050 all stone types ø 40 12 9 round point 90 B 71.070 rotating bush hammer device y for use on angle grinders y with 4 bush hammer rolls y alternatively for marble or granite application order no. marble B 72.020 granite B 72.030 spare rolls granite B 72.030.01 Bush hammer devices for stationary machines on request. REXID pneumatic riffling tool shaft 7 y for fine sculpturing works y equipped with tungsten carbide moulded plates y shaft made of precisely processed square-profile steel y ideal for preparing the basis under embossed letters application riffling face number of interval between length order no. mm blade rows blades mm mm 8 x 10 4 2,5 190 B 75.020 REXID pneumatic groove riffling chisel shaft 7 y equipped with tungsten carbide moulded plates y pointed riffling blades y shaft made of precision processed square-profile steel y ideal for preparing wedge-shaped letterings and ornaments application riffling face number of interval between length order no. mm riffling blades blades mm mm shaft form 7 6,5 x 12 5 2,5 190 B 75.040 23

pneumatic tools REXID pneumatic riffler shaft 7 y for precision sculpturing y equipped with tungsten carbide moulded plates in straight shape y shaft made of precision processed square-profile steel application riffling face number of interval between blade form order no. mm riffling blades blades mm shaft form 7 15 x 12 3 4 straight B 75.060 15 x 12 4 3 straight B 75.080 REXID pneumatic riffler shaft 7 y equipped with tungsten carbide moulded plates or single plates, straight or inclined y precision processed shaft, approx. 190 mm long y for use in light and medium pneumatic hammers riffling face number of interval between blade- shape order no. mm riffling blades blades mm form shaft form 7 20 x 15 4 3,7 straight moulded plates B 75.110 20 x 15 4 3,7 inclined moulded plates B 75.130 20 x 20 3 5,0 straight single plate B 75.150 20 x 20 4 4,0 straight single plate B 75.210 20 x 20 4 4,0 inclined single plate B 75.230 20 x 20 4 4,5 straight moulded plates B 75.250 20 x 20 4 4,5 inclined moulded plates B 75.270 REXID pneumatic riffler shaft 8, 10 y equipped with tungsten carbide moulded plates or single plates, straight or inclined y precision processed round shaft, approx. 190 mm long, with definition socket end y for use in light and medium chisel hammers riffling face number of interval between blade- shape order no. order no. mm riffling blades blades mm form shaft form 8 shaft form 10 20 x 20 4 4,0 straight single plate - B 80.090 20 x 20 4 4,0 inclined single plate - B 80.110 20 x 20 4 4,5 inclined moulded plate B 79.150-25 x 25 3 3,7 straight single plate - B 80.200 25 x 25 3 3,7 inclined single plate - B 80.220 25 x 25 4 5,0 straight single plate B 79.240 B 80.240 25 x 25 4 5,0 inclined single plate B 79.260 B 80.260 25 x 25 5 4,0 straight moulded plate - B 80.280 25 x 25 5 4,5 inclined moulded plate - B 80.300 REXID ERGO pneumatic rifflers shaft 10 y with rubber sleeve for highest working comfort y wrist and finger-joints are protected due to minimized vibration y no heating of tool, permits higher productivity y equipped with tungsten carbide moulded plate or single plate, straight or inclined y precision processed round shaft approx. 190mm long, with high precision socket shaft y for use in light and medium heavy chisel hammers riffling face number of interval between blade shape order no. mm riffling blades blades mm shape shaft form 10 25 x 25 4 5,0 straight single plate B 80.400 25 x 25 4 5,0 inclined single plate B 80.410 24

pneumatic tools REXID pneumatic riffler shaft 11, 13B y equipped with tungsten carbide single plates y straight or inclined shape y precision processed round shaft, approx. 190 mm long, with precision shaft, shaft form 11 y precision processed hexagonal shaft, approx. 150 mm long, with precision socket shaft form 13 B y for use in heavy pneumatic chisel hammers riffling face number of interval between blade- shape order no. order no. mm riffling blades blades mm form shaft form 11 shaft form 13 B 30 x 30 3 7,5 straight single plate B 81.010-30 x 30 3 7,5 inclined single plate B 81.030-30 x 30 4 6,0 straight single plate B 81.050-30 x 30 4 6,0 inclined single plate B 81.070-40 x 40 4 7,5 straight single plate B 81.100 B 84.200 REXID ERGO pneumatic riffler shaft 11 y with rubber sleeve for ultimate working comfort y wrist and finger-joints are protected due to minimized vibration y no heating of tool, permits higher productivity, also for ornament works y equipped with tungsten carbide moulded plate or single plate, straight or inclined shape y precision processed round shaft, approx. 190mm long, with precision shaft y for use in heavy chisel hammers riffling face number of interval between blade- shape order no. mm riffling blades blades mm form shaft form 11 30 x 30 3 7,5 straight single plate B 81.080 30 x 30 4 6,0 straight single plate B 81.085 30 x 30 4 6,0 inclined single plate B 81.090 40 x 40 4 7,5 straight single plate B 81.300 tungsten carbide pneumatic riffler REISSER y equipped with two tungsten carbide blades, for use in REISSER bush hammer and riffling device y precision processed shaft made of special tool-steel, approx. 90 mm long y socket shaft Ø 19 x 50 mm riffling face number of interval between blade form shape order no. mm riffling blades blades mm 50 x 30 2 15 straight single plate B 85.010 holder device for riffling tool y for REISSER bush hammer and riffling device order no. H 33.099.029.020 25

drills tungsten carbide pneumatic hollow drill BH 9/E resp. BH 10 y fitting for pneumatic high speed drilling machine BH 9/E or BH 10 y with tungsten carbide single blade y shaft made of high quality drill-steel y continuous bore and air exit for blow drilling y hexagonal shaft in special version drill ø mm usable length mm order no. 19 230 B 90.030 22 230 B 90.040 REXID tungsten carbide letter-hole drill y with welded tungsten carbide insert in massive triangular shape y cylindrical shaft, Ø 8 mm round y for drilling of fixing holes with light and medium electric- and pneumatic percussion drill, max. rotation speed 900/min drill entire length drilling depth packing unit order no. ø mm mm mm 3,0 65 10 10 B 91.005 3,5 65 10 10 B 91.010 4,0 65 10 10 B 91.020 5,0 65 10 10 B 91.040 tungsten carbide letter-hole drill y with sturdy tungsten carbide insert y short spiral shape for higher stability and longer life y cylindric-round clamping shaft, with short drilling spiral y for light and medium electric- or pneumatic percussion drills drill entire length drilling depth packing unit order no. ø mm mm mm 3,5 58 18 10 B 91.050 4,0 58 18 10 B 91.060 4,5 70 25 10 B 91.070 5,0 70 25 10 B 91.080 6,0 70 25 10 B 91.090 tungsten carbide letter-hole drill PI3 y with stabile tungsten carbide-insert y cylindrical round-shaft y for natural stone y special type for higher stability and longer life y for use in any turning- or hammer drilling machine drill entire length drilling depth packing unit order no. ø mm mm mm 3,5 60 16 10 B 91.100 4,0 60 16 10 B 91.110 4,5 65 20 10 B 91.120 5,0 70 40 10 B 91.130 6,0 80 50 10 B 91.140 26

drills tungsten carbide high performance drills y with high quality tungsten carbide insert y special alloyed steel quality y cylindrical round shaft y for natural stone, concrete and bricks y with special spiral for optimum drilling powder transport y optimum proportion between groove- and back width enables higher performance and longer life y for use in any turning- or hammer drilling machine drill entire length drilling depth packing unit order no. ø mm mm mm 3 60 30 10 B 91.250 4 75 40 10 B 91.260 5 85 50 10 B 91.270 6 100 60 10 B 91.280 7 100 60 10 B 91.290 8 120 80 10 B 91.300 10 120 80 10 B 91.310 12 150 90 10 B 91.320 14 150 90 10 B 91.330 16 150 90 10 B 91.340 tungsten carbide drills SDS plus y with specially sturdy tungsten carbide insert y shaft made of wear resistant special steel y precision-ground spiral-grooves for quick transport of drilling powder y for electric-drill hammers of different brands with SDS-plus socket drill entire length drilling depth order no. ø mm mm mm 4 110 50 B 92.010 5 110 50 B 92.020 6 110 50 B 92.030 6 160 100 B 92.040 7 110 100 B 92.050 8 110 50 B 92.060 8 160 100 B 92.070 10 110 50 B 92.080 10 160 100 B 92.090 10 210 150 B 92.100 12 160 100 B 92.110 12 210 150 B 92.120 14 160 100 B 92.130 14 210 150 B 92.140 16 210 150 B 92.150 18 200 150 B 92.160 18 350 250 B 92.170 20 200 150 B 92.180 20 300 250 B 92.190 22 250 200 B 92.200 25 250 200 B 92.210 27

drills tungsten carbide drill SDS Max y with 4 blades x-shape drilling head y large volume two-way spiral for fastest transport of drilling powder y extremely fast, extremly long life y for electric drill hammers with SDS Max socket drill entire length drilling depth order no. ø mm mm mm 12 340 200 B 92.300 12 540 400 B 92.310 12 690 550 B 92.320 14 340 200 B 92.330 14 540 400 B 92.340 15 340 200 B 92.350 15 540 400 B 92.360 16 340 200 B 92.370 16 540 400 B 92.380 18 340 200 B 92.390 18 540 400 B 92.400 20 320 200 B 92.410 20 520 400 B 92.420 20 920 800 B 92.430 22 320 200 B 92.440 22 520 400 B 92.450 22 920 800 B 92.460 24 320 200 B 92.470 24 520 400 B 92.480 25 320 200 B 92.490 25 520 400 B 92.500 25 920 800 B 92.510 28 370 250 B 92.520 28 570 450 B 92.530 30 370 250 B 92.540 30 570 450 B 92.550 32 370 250 B 92.560 32 570 450 B 92.570 32 920 800 B 92.580 35 370 250 B 92.590 35 570 450 B 92.600 40 370 250 B 92.610 40 570 450 B 92.620 tungsten carbide hammer drills HR y fitting for DUSS P16 and P18 y specially tuned high performance quality from the drill manufacturer y faster drilling advance y longer tool life drill type drill entire length drilling depth order no. ø mm mm mm HR 505 5 110 50 B 93.010 HR 605 6 110 50 B 93.030 HR 610 6 160 110 B 93.040 HR 710 7 160 100 B 93.043 HR 810 8 160 110 B 93.050 HR 815 8 210 150 B 93.060 HR 1010 10 160 110 B 93.070 HR 1015 10 210 150 B 93.080 HR 1020 10 260 200 B 93.081 HR 1210 12 166 100 B 93.090 HR 1215 12 210 150 B 93.100 HR 1220 12 266 200 B 93.101 HR 1410 14 166 100 B 93.110 HR 1420 14 266 200 B 93.111 HR 1510 15 166 200 B 93.112 28

drills tungsten carbide hammer drill HDR y fitting for DUSS P16 and P18 y specially tuned high performance quality from the drill manufacturer y faster drilling advance y longer tool life drill type drill entire length drilling depth order no. ø mm mm mm HDR 1615 16 215 150 B 93.120 HDR 1625 16 315 250 B 93.130 HDR 1640 16 465 400 B 93.131 HDR 1815 18 215 150 B 93.140 HDR 1840 18 465 400 B 93.150 HDR 2015 20 215 150 B 93.160 HDR 2025 20 315 250 B 93.170 HDR 2040 20 465 400 B 93.171 HDR 2240 22 465 400 B 93.180 HDR 2425 24 315 250 B 93.190 HDR 2525 25 315 250 B 93.200 HDR 2540 25 465 400 B 93.210 mandrel for DUSS hammer drill mandrel type fitting for for drill type order no. DR 2 DUSS P28, P30 HR, HDR B93.389 DU 2 DUSS P28, P30 HR, HDR, SDS B93.401 DR 3 DUSS P32, P36, P60, P80, P90 HR, HDR* B93.402 DX-SDS DUSS PX 46, PX 76, PX 96 SDS-Plus B 93.403 * these mandrels can be used only for drills up to ø 18 mm tungsten carbide hammer drill y fitting for DUSS P28 and P30 y shape H with ground hexagonal shank y specially adapted high performance quality from the hammer manufacturer y faster drilling advance y longer life drill type drill entire length drilling depth order no. ø mm mm mm H 2182 18 350 260 B 93.220 H 2201 20 240 150 B 93.230 H 2202 20 350 260 B 93.240 H 2204 20 500 410 B 93.245 H 2221 22 240 150 B 93.250 H 2222 22 350 260 B 93.260 H 2241 24 240 150 B 93.270 H 2242 24 350 260 B 93.280 H 2254 25 500 410 B 93.285 H 2261 26 240 150 B 93.290 H 2282 28 350 260 B 93.310 H 2302 30 350 260 B 93.320 H 2322 32 350 260 B 93.331 29

drills tungsten carbide double spiral drill y fitting for DUSS P 60, P80, P90, P36, PO 32 y specially tuned high performance quality from the drill manufacturer y faster drilling advance y longer tool life drill type drill entire length drilling depth order no. ø mm mm mm H 3162 16 420 260 B 94.010 H 3182 18 420 260 B 94.020 H 3202 20 420 260 B 94.030 H 3222 22 420 260 B 94.040 H 3224 22 570 410 B 94.045 H 3252 25 420 260 B 94.050 H 3254 25 570 410 B 94.055 H 3282 28 420 260 B 94.060 H 3284 28 570 410 B 94.065 H 3302 30 420 260 B 94.070 H 3322 32 420 260 B 94.080 H 3324 32 570 410 B 94.085 H 3352 35 420 260 B 94.090 H 3402 40 420 260 B 94.100 H 3404 40 570 410 B 94.105 tungsten carbide engraving tool y with clamping shaft Ø 10 mm y cutting blade angle 90 y fitting for Incimar or Scheibenbogen engraving machines shape application cutting width order no. G hard stone 10 B 95.010 G hard stone 15 B 95.020 U soft stone 10 B 95.030 30

hand tools Sharpening instructions for tungsten carbide tools General Guidelines: y Timely and professional sharpening improves productivity and life of all tools. y Using dull tools unnecessarily increases the impact on carbide, solder joints and steel shaft and damages them. y The sharper an edge, the longer lasting its cutting ability. Even the most minute notches affect accuracy and durability. Notch-free sharpening edges are obtained in two steps: first use a fine silicone carbide disc (grit 200), followed by a whetstone (grit 320 ) and boron carbide hand-lapping finish. y Sharp corners and rims on carbide metal points and cutters lead to chipping, but can be avoided by gentle touch-up or rounding with a fine whetstone. y To sharpen tools and adjust steel shafts: 1. Carbide inserts: Carborundum sharpening discs medium (grit 60 80) and fine (grit 1220 200) hardness of disc ø J (150 ø) to H (200 ø), or fine-grit diamond disc 2. Steel shafts: carborundum sharpening disc grit 36 45, hardness O/P y It is imperative that sharpening discs operate impact-free and are sharp at all times, to avoid notching sharpened edges. Dull discs increase the temperature and lead to fissures. To adjust circular movement and sharpening ability of discs, use truing tools, preferably diamond truing tools. y Sharpening is done either under competely dry conditions or with water flow. However, never cool heated tools in water! y We recommend to pre-heat compressed-air tools during extremely cold weather, to avoid shaft breakage. Lettering, Edging, Striking and charing chisels (figures 1 to 5) y Sharpen cutting edge slightly beveled or better yet, slightly rounded (1). Cutting edge has to remain precisely centered. y Do not hollow-out cutting edge (3), or move cutting edge off center (4), or sharpen edge diagonally (5). y Correct angle for granite: 55 60 degrees. y Correct angle for marble: 45 degrees. y Outer cutting edges of lettering chisels used for edging, as well as striking and charing chisels need to be given a 10 degree angle for strength (2.) y To prevent fissures in carbide edges due to sharpening, sharpening discs need to be kept sharp and tools need to be worked on alternating sides to provide even warming from both sides. Pointed and Embossing chisels (figures 6 to 9) y Sharpen pointed chisels cone shaped and slightly round tips (6) y Sharpen embossing chisels from two sides (7a), creating a small cutting edge and flatten edge to between 0,5 mm and 1,5 mm (7b). y Avoid hollow (8) and very pointed sharpening (9), but if occurred, reduce points and corners slightly using whetstone! 31

hand tools steel tools lettering chisel y for sand stone with mallet head y slim blade y hand forged, made of octagonal tool-steel application cutting width steel thickness length order no. approx. mm mm approx. mm sand stone 6 8 180 A 01.010 8 8 180 A 01.020 10 8 180 A 01.030 10 8 180 A 01.040 10 10 180 A 01.050 12 10 180 A 01.060 14 10 180 A 01.070 14 12 180 A 01.100 carving chisel y for sand stone: with very slim blade and mallet head y for marble and lime stone: with slim blade and hammer head y hand forged, made of octagonal tool-steel application cutting width steel thickness head type length order no. approx. mm mm approx. mm sand stone 6 8 mallet head 280 A 01.160 8 8 mallet head 280 A 01.170 10 8 mallet head 280 A 01.180 8 10 mallet head 280 A 01.190 10 10 mallet head 280 A 01.200 12 10 mallet head 280 A 01.210 14 10 mallet head 280 A 01.220 14 12 mallet head 280 A 01.250 16 12 mallet head 280 A 01.260 marble and 8 8 hammer head 260 A 01.330 lime stone 10 8 hammer head 260 A 01.340 10 10 hammer head 260 A 01.370 12 10 hammer head 260 A 01.380 14 12 hammer head 260 A 01.420 16 12 hammer head 260 A 01.430 edging tool y for sand stone: with very slim blade and mallet head y for marble and lime stone with slim blade and mallet head y for hard stone types: with strong blade and hammer head y hand forged, made of octagonal tool-steel application cutting width steel thickness head type length order no. approx. mm mm approx. mm sand stone 12 8 mallet head 200 A 02.200 14 10 mallet head 210 A 02.210 16 12 mallet head 220 A 02.220 18 14 mallet head 230 A 02.230 20 16 mallet head 240 A 02.240 marble and 14 10 mallet head 180 A 02.270 lime stone 16 12 mallet head 190 A 02.280 18 14 mallet head 200 A 02.290 granite 14 12 hammer head 200 A 02.320 18 14 hammer head 200 A 02.330 32

hand tools chisels y for sand stone: with very slim blade and mallet head y for marble and lime stone: with slim blade and mallet head y for hard stone types: with strong blade and hammer head y hand forged, made of octagonal tool-steel application cutting width steel thickness head type length order no. approx. mm mm approx. mm sand stone 25 16 mallet head 260 A 02.010 30 18 mallet head 260 A 02.020 35 20 mallet head 260 A 02.030 marble and 20 16 mallet head 210 A 02.050 lime stone 25 18 mallet head 210 A 02.060 granite 18-20 16 hammer head 200 A 02.080 22-24 18 hammer head 200 A 02.090 26-27 22 hammer head 200 A 02.110 22-24 Lu.* 18 hammer head 200 A 02.130 * Lu. = air hardened steel steel tools pointed chisels y made of octagonal steel with mallet head y slim forged point y very recommendable for fine works in sand stone application steel thickness length order no. mm mm sand stone 10 260 A 06.360 12 260 A 06.370 pointed chisels y hand forged, made of well-proved octagonal steel y with very slim point for sand stone, optional with mallet or hammer head y with slim point for marble and lime stone y with strong point for granite application steel thickness length head type order no. mm approx. mm sand stone 12 240 mallet head A 06.110 14 250 mallet head A 06.120 16 260 mallet head A 06.130 18 260 mallet head A 06.140 20 270 mallet head A 06.150 14 250 hammer head A 06.030 16 260 hammer head A 06.040 18 270 hammer head A 06.050 20 270 hammer head A 06.060 marble and 10 210 hammer head A 06.200 lime stone 12 220 hammer head A 06.210 14 230 hammer head A 06.220 16 240 hammer head A 06.230 18 250 hammer head A 06.240 granite 16 240 hammer head A 06.290 18 250 hammer head A 06.300 22 260 hammer head A 06.320 18 Lu.* 250 hammer head A 06.350 * Lu. = air hardened steel 33

hand tools steel tools carving point y hand forged, made of octagonal steel y with flat, half round point y hammer head application steel thickness length order no. mm mm sand stone 18 260 A 06.380 pointed and flat chisel y for concrete and brickwork y hand-forged, made of octagonal steel application steel thickness cutting width length order no. mm mm mm pointed chisels for 18-300 A 06.430 construction 20-300 A 06.440 flat chisels for 18 24 300 A 06.550 construction 20 26 300 A 06.560 claw chisels y hand-forged, made of octagonal tool-steel y slim shaped teeth application cutting width teeth steel thickness head type length order no. approx. mm mm approx. mm sand stone 10 2 8 mallet head 250 A 03.010 12 3 8 mallet head 250 A 03.020 12 3 12 mallet head 250 A 03.050 14 3 10 mallet head 250 A 03.030 16 4 10 mallet head 250 A 03.040 18 4 12 mallet head 250 A 03.060 marble 10 3 8 hammer head 250 A 03.110 12 4 8 hammer head 250 A 03.120 12 3 10 hammer head 250 A 03.130 14 4 10 hammer head 250 A 03.140 16 4 12 hammer head 250 A 03.160 claw chisels y hand-forged, made of octagonal tool-steel, with mallet head y for sand stone: with flat, slim teeth y for shell limestone: with pointed teeth y for marble and lime stone: with pointed, narrow teeth application cutting width teeth steel thickness length order no. approx. mm mm approx. mm sand stone 22 3 14 210 A 03.200 22 4 14 210 A 03.210 24 4 16 220 A 03.240 28 5 18 220 A 03.270 shell limestone 22 4 14 210 A 03.310 24 4 16 210 A 03.340 28 5 18 210 A 03.370 marble and 16 3 12 180 A 03.400 limestone 16 4 12 180 A 03.410 20 4 14 190 A 03.420 25 5 16 200 A 03.440 34

hand tools claw holder y made of hexagonal tool-steel y with large edge radius and mallet head y clamping slot for holding of claw- and chisel bits width mm length mm order no. 15 190 A 03.480 25 190 A 03.490 40 190 A 03.500 steel tools claw- and chisel bits y for sand stone, marble and shell limestone shape application width teeth tooth order no. mm interval mm claw bit sand stone 15 3 5,0 A 03.510 25 5 5,0 A 03.530 30 6 5,0 A 03.540 40 8 5,0 A 03.550 claw bit marble and 15 4 3,3 A 03.600 shell limestone 25 7 3,3 A 03.620 30 9 3,3 A 03.625 40 12 3,3 A 03.630 chisel bit sand stone, 15 - - A 03.709 marble and 25 - - A 03.710 shell limestone 40 - - A 03.720 cleavers y for sand stone, made of forged cast-steel, square y heart shape with mallet head y for marble and lime stone, made of octagonal steel, extremely thin blade application cutting width shaft diameter length order no. mm approx. mm mm approx. mm sand stone 40 20-22 190-200 A 04.010 60 20-22 190-200 A 04.020 80 20-22 190-200 A 04.030 100 20-22 190-200 A 04.040 120 20-22 190-200 A 04.050 marble and 40-45 16 210 A 04.160 lime stone 55-60 20 210 A 04.170 cleaver holder and inserts y patented cleaver holder, made of special tool-steel y with mallet head y inserts for sand stone, marble and shell limestone width mm length mm order no. cleaver holder 60 190-200 A 04.220 80 190-200 A 04.230 100 190-200 A 04.240 120 190-200 A 04.250 inserts for 60 - A 04.300 sand stone, 80 - A 04.310 marble and 100 - A 04.320 shell limestone 120 - A 04.330 35

hand tools steel tools pitching tools y light shape made of octagonal steel, for sand stone and granite y heavy shape made of square steel, for granite y with hammer head application cutting width steel thickness shape length order no. approx. mm mm approx. mm sand stone 30 18 light 180 A 05.010 and granite 40 22 light 200 A 05.030 granite 50 22 schwer 200 A 05.100 setter y free formed tool, made of tool-steel y with hammer head, for sand stone application cutting width length order no. mm mm sand stone 60 210 A 05.110 80 210 A 05.120 36

hammer and stone axes setting hammer y with two blades y made of forged tool-steel y with oval hole, handle included application weight order no. order no. order no. g setting hammer spare handle safety wedge granite 4000 A 07.030 E 01.120 E 01.390 steel tools stone splitting hammer y for all stone types y with oval hole, handle included application weight order no. order no. order no. g stone splitting hammer spare handle safety wedge hard- and 3000 A 07.061 E 01.130 E 01.380 soft stone 4000 A 07.071 E 01.140 E 01.390 5000 A 07.081 E 01.150 E 01.390 sledge hammer y with slightly rounded hammer body y oval handle hole y handle included application weight order no. order no. order no. g sledge hammer spare handle safety wedge all stone types 3000 A 07.150 E 01.130 E 01.380 4000 A 07.160 E 01.130 E 01.380 5000 A 07.170 E 01.140 E 01.390 stone mason's hammer y hollow ground face and one blade y free formed tool, made of tool-steel y with oval hole, handle included application shape weight size length order no. order no. order no. g mm mm spare handle safety wedge soft stone 1 blade, 1500 40x40 190 A 07.240 E 01.100 E 01.390 1 hollow ground 2000 45x45 190 A 07.250 E 01.120 E 01.390 hammer face 2500 45x45 240 A 07.260 E 01.120 E 01.390 splitting wedge y with sharp blade y made of tool-steel application weight g order no. sand stone 500 A 12.450 37

hammers and stone axes steel tools pick y made of tool-steel y free formed y with oval hole and handle application weight length order no. order no. g mm spare handle sand stone 1500 350 A 08.010 E 01.080 2000 400 A 08.020 E 01.080 2500 450 A 08.030 E 01.080 stone hammer y precision forged tool y with oval hole and handle y two alternative shapes: - blades on two sides - one side blade, opposite side teeth y handle included application shape weight width order no. order no. g mm spare handle sand stone double blade 1300 60 A 08.100 E 01.080 and lime stone double blade 1600 80 A 08.110 E 01.080 double blade 1700 100 A 08.120 E 01.080 sand stone blade/teeth 1300 60 A 08.140 E 01.080 blade/teeth 1600 80 A 08.150 E 01.080 blade/teeth 1700 100 A 08.160 E 01.080 lime stone blade/teeth 1300 60 A 08.260 E 01.080 blade/teeth 1600 80 A 08.270 E 01.080 blade/teeth 1700 100 A 08.280 E 01.080 texture hammer y with teeth and clamping wedge y oval shaft y handle and holder made of cast steel application shape teeth teeth weight order no. mm g sand stone pointed teeth 8 x 8 13 3800 A 08.350 and shell pointed teeth 10 x 10 11 4500 A 08.360 limestone pointed teeth 11 x 11 11 5100 A 08.370 spare parts texture hammer holder pointed teeth clamping wedge spare parts width order no. size order no. size order no. for mm mm mm A 08.350 8 A 08.410 8 x 8 A 08.470 8 A 08.530 A 08.360 10 A 08.420 10 x 10 A 08.480 10 A 08.540 A 08.370 11 A 08.430 11 x 11 A 08.490 11 A 08.550 38

hammers and stone axes steel lettering hammer y in two shapes: - standard shape with slightly rounded hammer body, tempered, with broken edges - bow shape with sharp edges y handle included shape weight order no. order no. order no. g spare handle safety wedge standard 500 A 07.300 E 01.010 E 01.370 600 A 07.310 E 01.010 E 01.370 750 A 07.320 E 01.020 E 01.370 bow shape 500 A 07.330 E 01.020 E 01.370 steel tools steel hammer y with slightly rounded hammer body y tempered, with broken edges y slim or standard shape y handle included shape weight order no. order no. order no. g spare handle safety wedge standard 1000 A 07.350 E 01.040 E 01.370 shape 1250 A 07.360 E 01.040 E 01.370 1500 A 07.370 E 01.050 E 01.370 slim shape 1000 A 07.400 E 01.020 E 01.370 1250 A 07.410 E 01.040 E 01.370 steel hammer with Ultratec-handle y steel hammer with fibre glass handle, for ergonomic working y less stress for wrists and ellbow joints y shatter-proof handle, no dry-out like on wooden handles y handle included shape weight g order no. standard shape 1000 A 07.630 1250 A 07.640 1500 A 07.650 2000 A 07.660 iron steel hammer y with slightly rounded hammer body y precision free-forged, with broken edges y handle included shape weight order no. order no. order no. g spare handle safety wedge standard 500 A 07.450 E 01.010 E 01.370 shape 750 A 07.460 E 01.030 E 01.370 39

hammers and stone axes steel tools steel mallet y pear shape y entire length approx. 235 mm weight diameter order no. order no. order no. g mm spare handle safety wedge 500 50 A 07.425 E 01.195 E 01.380 750 63 A 07.430 E 01.195 E 01.380 1000 67 A 07.435 E 01.195 E 01.380 stone mason's mallet y made of seasoned white beech, with transparent protective varnish diameter mm weight g shape order no. 100-110 640 white beech K 09.020 120 800 white beech K 09.030 130 800 white beech K 09.040 140 1000 white beech K 09.050 150 1200 white beech K 09.060 160 1250 white beech K 09.070 170 1600 white beech K 09.080 180 1700 white beech K 09.090 200 2000 white beech K 09.100 synthetic mallets y made of impact-resistant cast-resin y extra long life y completely heat- fire- and water-resistant y standard quality (brown): hardness equalling our white beech-mallets y special-quality (green): softer version, for finer works in sand stone diameter shape colour weight order no. order no. order no. mm g spare handle spare wedge 115 standard brown 750 K 09.150 E 01.190 E 01.380 115 standard brown 950 K 09.160 E 01.190 E 01.380 130 standard brown 1200 K 09.170 E 01.190 E 01.380 130 standard brown 1350 K 09.180 E 01.190 E 01.380 130 standard brown 1500 K 09.190 E 01.190 E 01.380 140 standard brown 1700 K 09.200 E 01.190 E 01.380 115 special green 750 K 09.250 E 01.190 E 01.380 115 special green 950 K 09.260 E 01.190 E 01.380 130 special green 1200 K 09.270 E 01.190 E 01.380 130 special green 1350 K 09.280 E 01.190 E 01.380 130 spezial green 1500 K 09.290 E 01.190 E 01.380 140 special green 1700 K 09.300 E 01.190 E 01.380 brick hammer y with round handle hole y handle included application weight g order no. order no. spare handle brick stone 500 A 07.500 E 01.160 quarry stone 1000 A 07.550 E 01.170 40

hammers and stone axes paving hammer application shape weight g order no. paving bricks Berlin 1000 A 07.580 Berlin 2000 A 07.590 Dieburg 2000 A 07.610 steel tools bush hammer system König/Beka y tensioning bolt Ø 20 mm y conical tensioning bolt y handle included hammer face weight order no. order no. order no. order no. mm g spare bolt spare handle safety wedge 35 x 35 1200 A 10.010 A 10.050 E 01.070 E 01.380 45 x 45 1700 A 10.020 A 10.040 E 01.070 E 01.380 bush hammer heads König/Beka y with bolt hole ø 20 mm application size mm teeth order no. soft stone 35 x 35 5 x 5 A 10.080 35 x 35 7 x 7 A 10.090 45 x 45 5 x 5 A 10.180 45 x 45 7 x 7 A 10.190 45 x 45 9 x 9 A 10.200 45 x 45 12 x 12 A 10.210 hard stone 35 x 35 4 x 4 A 10.120 35 x 35 5 x 5 A 10.130 35 x 35 7 x 7 A 10.140 35 x 35 10 x 10 A 10.150 45 x 45 4 x 4 A 10.230 45 x 45 5 x 5 A 10.240 45 x 45 7 x 7 A 10.250 45 x 45 9 x 9 A 10.260 45 x 45 12 x 12 A 10.270 riffling hammer heads König/Beka y with bolt hole ø 20 mm application size mm rows order no. soft stone 35 x 35 5 A 10.310 35 x 35 7 A 10.320 45 x 45 5 A 10.290 45 x 45 7 A 10.300 hard stone 35 x 35 5 A 10.370 35 x 35 7 A 10.380 45 x 45 5 A 10.340 45 x 45 7 A 10.350 41

hand tools steel tools set of wedges y for splitting of natural stone blocks y one set = 1 wedge + 2 shims bore hole ø wedge length order no. order no. mm mm wedge shim 18 150 A 12.010 A 12.200 20 150 A 12.020 A 12.210 22 150 A 12.020 A 12.220 28 300 A 12.030 A 12.240 29 200 A 12.040 A 12.250 34 300 A 12.060 A 12.270 34 400 A 12.100 A 12.320 34 500 A 12.120 A 12.360 36 300 A 12.060 A 12.280 36 400 A 12.100 A 12.330 36 500 A 12.120 A 12.370 38 300 A 12.070 A 12.290 38 500 A 12.130 A 12.380 pinch bar y hande forged, made of octagonal steel steel thickness length order no. mm mm 22 800 A 20.010 crowbar y precision forged, made of square steel y with broken edges steel thickness length weight approx. order no. mm mm g 30/15 1000 5000 A 20.020 32/20 1250 8000 A 20.030 35/20 1500 9000 A 20.040 35/20 1750 12500 A 20.050 37/20 2000 15000 A 20.060 wrecking bar y made of round steel y also for use as light crow bar steel thickness length order no. mm mm 22 800 A 20.070 42

pneumatic tools steel tools from our own production are available also as pneumatic tools y the following table shows the available shaft forms y all shafts and shanks made of tempered steel steel tools You can find a detailed table, showing the shaft forms and the corresponding shanks for each hammer type on page 12 of this catalogue. pneumatic tool blanks y forge your own tools y made of tool-steel y tempered shaft and socket On request, we can supply blanks in all shaft forms mentioned above. pneumatic chisel shaft form 7 y made of tool-steel, precision forged y available in different cutting widths y shaft and shank made of tempered steel y avialable for sand stone, on request also for marble/ limestone; for marble/limestone type minimum order quantity of 10 pieces application shaft form cutting width steel thickness length order no. mm mm mm sand stone 7 8-16* 12 230 A 75.010 7 12-20* 14 230 A 75.030 * please specify the requested cutting width in your order pneumatic edging tool shaft form 7, 14 y made of precision forged tool-steel y tempered shaft and shank application shaft form cutting width steel thickness length order no. mm mm mm sand stone 7 16 12 240 A 76.010 7 18 14 240 A 76.020 14 18 14 240 A 76.030 marble and 7 16 12 240 A 76.060 lime stone 7 18 14 240 A 76.070 14 18 14 240 A 76.080 43

pneumatic tools steel tools pneumatic chisel shaft form 8, 10, 11 y made of precision forged tool-steel y tempered shaft and socket y available in sand stone; on request also for marble/ limestone; for marble/limestone type minimum order quantity of 10 pieces application shaft form cutting width steel thickness length order no. mm mm mm sand stone 8 25 16 270 A 76.150 8 30 18 270 A 76.190 10 25 16 270 A 76.160 10 30 18 270 A 76.200 11 35 20 270 A 76.220 11 40 22 270 A 76.230 pneumatic pointed chisel shaft form 7, 8, 10, 11, 12, 14 y made of precision forged tool-steel y tempered shaft and socket y available for sand stone, on request also for marble/ limestone; for marble/limestone type minimum order quantity of 10 pieces application shaft form Steel thickness length order no. mm mm sand stone 7 12 250 A 78.010 7 14 250 A 78.020 14 14 250 A 78.030 14 16 280 A 78.070 8 16 280 A 78.050 8 18 280 A 78.090 10 16 280 A 78.060 10 18 280 A 78.100 11 20 290 A 78.120 11 22 290 A 78.130 12 22 290 A 78.140 pneumatic claw chisel shaft form 7, 8, 10, 11, 14 y made of precision forged tool-steel y tempered shaft and shank y available for sand stone, on request also for marble/limestone; for marble/limestone type minimum order quantity of 10 pieces application shaft form teeth cutting width steel thickness length order no. mm mm mm sand stone 7 3-5 18-20 12 240 A 77.010 7 3-5 18-22 14 240 A 77.020 14 3-5 18-22 14 240 A 77.030 14 3-5 20-24 16 270 A 77.070 8 3-5 20-24 16 270 A 77.050 8 4-6 24-28 18 270 A 77.090 10 3-5 20-24 16 270 A 77.060 10 4-6 24-30 18 270 A 77.100 11 4-6 24-30 20 280 A 77.120 11 5-7 26-32 22 280 A 77.130 44

pneumatic tools pneumatic claw bit holder shaft form 7, 10, 14 y made of precision forged tool-steel y tempered shaft and shank application shaft form cutting width steel thickness length order no. mm mm mm sand stone, 7 25 18 230 A 77.400 shell limestone 7 40 20 230 A 77.450 and marble 14 25 18 230 A 77.420 14 40 20 230 A 77.470 10 25 18 230 A 77.440 10 40 20 230 A 77.490 steel tools claw- and chisel bits on page 35. pneumatic key-slot point shaft form 13B y made of hexagonal tool-steel, precision forged y tempered shaft and shank application shaft form steel thickness length order no. mm mm granite 13 B 25 200 A 78.400 13 B 25 250 A 78.410 pneumatic chisel for SHK 4/26 y pointed-, flat- and broad chisel in different lengths y socket 18 x 50 mm, hexagonal shape application shape length cutting width order no. mm mm concrete, pointed chisel 250 - A 40.010 brick pointed chisel 350 - A 40.020 flat chisel 250 25 A 40.100 flat chisel 350 25 A 40.110 broad chisel 200 60 A 40.200 45

pneumatic tools steel tools original DUSS chisel y for different electro-pneumatic chisel hammers fitting for tool type code entire length cutting width order no. hammer type mm mm P20 P28, 28S pointed chisel SM 21 340 - A 21.010 P30 flat chisel FM 22 340 20 A 21.020 broad chisel BM 23 340 40 A 21.030 PK 35/40/45 pointed chisel SM 401 400 - A 22.010 /75 pointed chisel SM 402 600 - A 22.020 flat chisel FM 403 400 25 A 22.030 flat chisel FM 404 600 25 A 22.040 pointed chisel SM 421 290 - A 22.005 flat chisel FM 423 290 26 A 22.025 broad chisel BM 405 360 50 A 22.050 spading chisel SP 406 420 100 A 22.060 PO32, P60, pointed chisel SM 342 420 - A 23.010 P80, P90, pointed chisel SM 356 560 - A 23.020 PK100 flat chisel FM 344 420 26 A 23.030 flat chisel FM 358 560 26 A 23.040 broad chisel BM 346 420 40 A 23.050 broad chisel BM 348 420 50 A 23.060 spading chisel SP 306 430 100 A 23.070 sledge hammer pointed chisel SM 610 500 - A 23.100 PK 150,PK 160, pointed chisel SM 611 650 - A 23.110 PK 300 flat chisel FM 612 500 28 A 23.120 flat chisel FM 613 650 28 A 23.130 broad chisel BM 614 500 50 A 23.140 spading chisel SP 615 500 120 A 23.150 DUSS chisel y with SDS-max-shank for electro-pneumatic chisel hammers fitting for tool type code entire length cutting width order no. hammer type mm mm PX 46/76/96 pointed chisel SMX 2 280 - A 39.010 pointed chisel SMX 4 400 - A 39.020 pointed chisel SMX 6 600 - A 39.030 flat chisel FMX 2 280 25 A 39.050 flat chisel FMX 4 400 25 A 39.060 flat chisel FMX 6 600 25 A 39.070 pointed chisel SPX 5 400 50 A 39.100 pointed chisel SPX 8 300 80 A 39.110 pointed chisel SPX 9 350 115 A 39.120 hollow chisel HMX 3 300 26 A 39.150 channel chisel KMX 4 300 32 A 39.200 tile chisel LMX 400 50 A 39.250 46

index B broad chisel REXID.................... 16 bush hammer REXID ERGO pneumatic bush hammer... 20 REXID pneumatic bush hammer........ 20 REXID Protect bush hammer........... 20 bush hammer heads König/Beka.......... 41 C carving chisel REXID carving chisel................ 5 steel carving chisel.................. 32 carving point......................... 34 chisel chisel for SHK 4/26................. 45 DUSS chisel....................... 46 REXID chisel hand........................... 6 pneumatic....................... 15 REXID ERGO pneumatic chisel......... 16 steel chisel hand........................... 33 pneumatic....................... 43 chisel bit............................ 35 claw bit............................. 35 claw bit holder hand............................. 35 pneumatic......................... 45 claw chisel pneumatic claw chisel................ 44 REXID claw chisel hand tool....................... 7 pneumatic....................... 17 steel claw chisel.................... 34 cleaver REXID cleaver hand........................... 7 pneumatic....................... 16 steel cleaver....................... 35 cleaver holder........................ 35 cleaver insert......................... 35 crowbar............................. 42 D drill double spiral drill for DUSS........... 30 hammer drill for DUSS............... 29 hammer drill HDR................... 29 hammer drill HR.................... 28 high performance drill............... 27 letter-hole drill..................... 26 pneumatic hollow drill............... 26 REXID letter-hole drill................ 26 SDS Max drill...................... 28 SDS plus drill...................... 27 drillmandrel for DUSS hammer drill....... 29 E edging tool hand............................. 32 pneumatic......................... 43 engraving tool........................ 30 H hammer brick hammer...................... 40 bush hammer REXID................. 11 bush hammer system König/Beka....... 41 carving pick REXID.................. 10 chipping hammer REXID.............. 9 hand scoring hammer REXID.......... 9 iron steel hammer................... 39 lump hammer REXID................ 10 paving hammer..................... 41 pick.............................. 38 riffling hammer REXID............... 11 sculpturing bush hammer............. 11 setting hammer..................... 37 setting hammer REXID............... 9 sledge hammer..................... 37 steel hammer...................... 39 steel hammer Ultratec................ 39 steel lettering hammer............... 39 stone hammer...................... 38 stone mason's hammer............... 37 stone splitting hammer............... 37 texture hammer..................... 38 hammer head bush head REXID................... 11 riffling head REXID.................. 11 hammer heads König/Beka.............. 41 holder device for riffling tool............. 25 hollow drill.......................... 26 K key-slot point........................ 45 L lettering chisel REXID ERGO pneumatic lettering chisel.. 14 REXID lettering chisel................ 5 REXID plus pneumatic lettering chisel... 13 REXID pneumatic lettering chisel SPEZIAL 14 REXID Protect-lettering chisel.......... 14 steel lettering chisel................. 32 M mallet steel mallet........................ 40 stone mason's mallet................ 40 synthetic mallets.................... 40 masonry claw chisel REXID.............. 6 P pick................................ 38 pinch bar............................ 42 pitcher REXID........................ 7 pitching tool......................... 36 pneumatic groove riffling chisel REXID..... 23 pneumatic tool blanks.................. 43 pointed chisel REXID pointed chisel hand........................... 8 pneumatic....................... 19 steel pointed chisel hand........................... 33 pneumatic....................... 44 pointed lettering chisel REXID ERGO pointed lettering chisel.... 18 REXID pointed lettering chisel......... 8 REXID Protect pointed lettering chisel... 18 points REXID points...................... 8 punch REXID punch hand........................... 8 pneumatic....................... 19 R riffler pneumatic riffler REISSER............. 25 REXID ERGO pneumatic riffler......... 24 REXID pneumatic riffler............... 24 riffling hammer heads König/Beka........ 41 riffling tool REXID..................... 23 rotating bush hammer device............ 23 S scorer REXID......................... 16 scoring and splitting tool REXID.......... 8 sculpturing chisel REXID............... 15 setter............................... 36 sharpening instructions................ 31 splitting wedge....................... 37 split tooth chisel REXID................ 18 stone axe REXID...................... 10 T texture hammer....................... 38 W wedges............................. 42 wrecking bar......................... 42 47