RECLINERS & RECLINA-WAY MOTION SOFAS WITH WOOD FRONT RAILS Refer to the Stapling Specification on page 7. CA TB 117-2013 & SB1019 label, item no. Recliners and Reclina-Way Motion Sofas listed below: Recliners 010 Reclina-Rocker reclining chair 016 Reclina-Way reclining chair 017 Reclina-Glider swivel recliner 01M Reclina-Rocker with 2-motor massage & heat reclining chair P1M Power Reclina-Rocker with 2-motor massage & heat reclining chair P10 Power Reclina-Rocker reclining chair 1HR Power Reclina-Rocker reclining chair with power lumbar and headrest P16 Power Reclina-Way reclining chair RECLINERS - Law Label backside of upholstered legrest, near the top edge and centered side-to-side. RECLINERS - Staple the labels on the backside of the upholstered front rail. Motion Sofas 330 Reclina-Way reclining sofa 320 Reclina-Way reclining loveseat 390 Reclina-Way reclining loveseat with console 33P Power Reclina-Way reclining sofa 32P Power Reclina-Way reclining loveseat 39P Power Reclina-Way reclining loveseat with console Rocking Loveseat Recliners 30L Left side (sitting) rocker recliner 30R Right side (sitting) rocker recliner 3PL Power left side (sitting) rocker recliner 3PR Power right side (sitting) rocker recliner Luxury Lift Power Recliners 1PL Luxury Lift Platinum power recliner 1PM Luxury Lift Platinum power recliner with 6-motor massage and heat 4LP Luxury Lift Silver power recliner MOTION SOFAS - Law Label backside of right side (sitting) upholstered legrest, near the top edge and centered side-to-side. MOTION SOFAS - Staple the labels on the backside of the right side (sitting) upholstered front rail. Page 1 of 7
LIFT RECLINERS WITH METAL FRONT RAILS Refer to the Stapling Specification on page 7. CA TB 117-2013 & SB1019 label, item no. Recliners listed below: Luxury Lift Power Recliners 1HL Luxury Lift Gold power recliner with heat 1ML Luxury Lift Gold power recliner with 6-motor massage and heat LIFT CHAIRS - Law Label backside of upholstered legrest, near the bottom edge of the legrest clevis assembly bracket and centered side-toside. LIFT CHAIRS - Product ID & Fabric Cleaning/ Staple the product ID label to right side (sitting), rear inside arm panel. Staple the fabric cleaning/patents label to the left side (sitting), rear inside arm panel. LSS - Fabric Cleaning/ Patents Label Legrest Clevis Assembly Bracket RSS - Product ID Label Page 2 of 7
LA-Z-TIME RECLINING MOTION UPHOLSTERY & MOTION-MODULARS Refer to the Stapling Specification on page 7. CA TB 117-2013 & SB1019 label, item no. The instructions on this page apply to the La-Z-Time Motion Upholstery and Motion-Modulars listed below: La-Z-Time Motion Upholstery 410 La-Z-Time recliner 430 La-Z-Time reclining sofa, 2 cushion 440 La-Z-Time reclining sofa, 3 cushion 480 La-Z-Time reclining loveseat 490 La-Z-Time reclining loveseat with middle console Power La-Z-Time Motion Upholstery 41P Power La-Z-Time recliner 43P Power La-Z-Time reclining sofa, 2 cushion 44P Power La-Z-Time reclining sofa, 3 cushion 48P Power La-Z-Time reclining loveseat 49P Power La-Z-Time reclining loveseat with middle console La-Z-Time Motion-Modular 40A La-Z-Time left arm (sitting) recliner 40B La-Z-Time right arm (sitting) recliner 40D La-Z-Time left arm (sitting) recliner with non-reclining armless middle 40E La-Z-Time right arm (sitting) recliner with non-reclining armless middle 40S La-Z-Time armless recliner Power La-Z-Time Motion-Modular 4AP Power La-Z-Time left arm (sitting) recliner 4BP Power La-Z-Time right arm (sitting) recliner 4DP Power La-Z-Time left arm (sitting) reclining loveseat 4EP Power La-Z-Time right arm (sitting) reclining loveseat 4SP Power La-Z-Time armless recliner 4AH PowerRecline+ La-Z-Time left arm (sitting) recliner with power lumbar and headrest 4BH PowerRecline+ La-Z-Time right arm (sitting) recliner with power lumbar and headrest. 4SH PowerRecline+ La-Z-Time armless recliner with power lumbar and headrest LA-Z-TIME RECLINERS & RECLINING SOFAS -Law Label backside of upholstered legrest, near the top edge and centered side-to-side. For sofa & loveseat styles, apply to the right side (sitting) legrest. LA-Z-TIME RECLINERS & RECLINING SOFAS - Staple the labels on the backside of the right side (sitting) front post. MOTION MODULARS - Law Label the backside of the right side (sitting) upholstered legrest, near the top edge and centered side-to-side. For units without a right arm, apply to the left side (sitting) legrest. MOTION MODULARS - Staple the labels on the backside of the right side (sitting) front post. For units without a right arm, staple to the left side (sitting) front post. For armless units, staple to bottom side of the rear seat rail. Page 3 of 7 Left Side Rear Seat Left Side (Sitting) Unit
CLASSICS HIGH LEG AND LOW PROFILE RECLINERS & COMPLEMENTS SWIVEL CHAIRS Follow the instructions and illustrations on the right to attach the deck label and the production ticket items, including: the law label, the product ID label and the fabric cleaning & patents label. Refer to the Stapling Specification on page 7. CA TB 117-2013 & SB1019 label, item no. Classics Recliners, and the Swivel Chairs listed below: Classics Recliners 025 Low profile recliner with 3-position mechanism 028 High leg recliner with 2-position mechanism 029 High leg recliner with 3-position mechanism Complements Swivel Chairs 020 Swivel rocker 021 Swivel occasional chair 022 Swivel glider CLASSICS & SWIVEL CHAIRS - Deck Label For classics and swivel chairs with loose seats, adhere the deck label to the center seat deck, 1" - 2" from the front seam. CLASSICS - Law, Product ID & Fabric Cleaning/ Staple law, product ID & fabric cleaning/ patents labels to bottom of mounting rail. If unit has two mounting rails, staple to the front one. SWIVEL CHAIRS - Law, at the front of the unit. The product ID label must be on the bottom of the right side (sitting) arm rail. Right Side (Sitting) Page 4 of 7
STATIONARY CHAIRS (COMPLEMENTS, STATIONARY, PREMIER), CHAISE LOUNGES & STATIONARY SECTIONALS (STATIONARY, PREMIER) Follow the instructions and illustrations on the right to attach the deck label and the production ticket items, including: the law label, the product ID label and the fabric cleaning & patents label. Refer to the Stapling Specification on page 7. CA TB 117-2013 & SB1019 label, item no. STATIONARY CHAIRS, CHAISE LOUNGES & SECTIONALS (with loose seats) - Deck Label Adhere the deck label to the center seat deck, 1" - 2" from the front seam. Stationary Chairs, Chaise Lounges and Sectional Seating Units listed below: Stationary Chairs and Chaises 023 Stationary chair 230 Premier stationary chair 02L Left side (sitting) chaise lounge 02R Right side (sitting) chaise lounge 20L Premier Left side (sitting) chaise lounge 20R Premier Right side (sitting) chaise lounge STATIONARY CHAIRS & SECTIONALS - Law, Cleaning/ toward the front of unit. The product ID label must be on right side (sitting). RSS Bottom Stationary Sectional Seating Units 03C Corner Unit 03D Left arm (sitting) sofa 03E Right arm (sitting) sofa 03L Left arm (sitting) chaise 03R Right arm (sitting) chaise 03M Armless middle 03W Left arm (sitting) sofa with corner 03X Right arm (sitting) sofa with corner Premier Stationary Sectional Seating Units 60A Left arm (sitting) chair 60B Right arm (sitting) chair 60C Corner unit 6CC 90-degree corner 6CL Left arm (sitting) cuddler 6CR Right arm (sitting) cuddler 60L Left arm (sitting) chaise 60R Right arm (sitting) chaise 60M Armless middle Modular Seating Units 04C Corner unit 04M Armless middle unit 04T Armless middle unit with drawer and table 04Q Left arm (sitting) chaise 04V Right arm (sitting) chaise 4QQ Left arm (sitting) reclining chaise 4VV Right arm (sitting) reclining chaise CHAISE LOUNGES & CHAISE SECTIONALS - Law, Product ID & Fabric Cleaning/ toward the front of unit. The product ID label must be on right side (sitting). For armless units, staple to the bottom rear seat rail. Rear Bottom Page 5 of 7
SOFAS AND SLEEP SOFAS (STATIONARY, PREMIER), SECTIONAL SOFAS AND SLEEP SOFAS (STATIONARY, PREMIER) AND MODULAR SOFAS AND SLEEP SOFAS Follow the instructions and illustrations on the right to attach the deck label and the production ticket items, including: the law label, the product ID label and the fabric cleaning & patents label. Refer to the Stapling Specification on page 7. CA TB 117-2013 & SB1019 label, item no. SOFAS, LOVESEATS & SLEEPERS - Deck Label For sofa, loveseat and sleeper styles with (1) or (3) seats, adhere the deck label to the center seat deck, 1" - 2" from the front seam or from the front of the sleeper deck. Sofas, Sleep Sofas, Sectional and Modular Sofas and Sleep Sofa Units listed below: Stationary sofas and sleep sofas 051 Queen sleep sofa 052 Full sleep sofa 05S Queen sleep sofa and ottoman with chaise cushion 550 Twin sleep chair 061 Sofa 062 Apartment size sofa 063 Loveseat 06S Sofa and ottoman with chaise cushion 650 Chair and a half Premier sofas and sleep sofas 510 Queen sleep sofa 520 Full sleep sofa 555 Twin sleep chair and a half 610 Sofa 61S Sofa and ottoman w/chaise cushion 620 Apartment size sofa 630 Loveseat 655 Chair and a half Premier sectional sofas and sleep sofas 60D Left arm (sitting) sofa 60E Right arm (sitting) sofa 6MM Armless loveseat 6SP Armless full sleeper Modular sofas and sleep sofas 04H Armless full sleep sofa 4MM Armless loveseat SOFAS, LOVESEATS & SLEEPERS - Deck Label For sofa, loveseat and sleeper styles with (2) seats, adhere the deck label to the left side (sitting) seat deck, 1" - 2" from front seam or from the front of the sleeper deck. Do not center. SOFAS & LOVESEATS - Law, Cleaning/ toward the front of unit. The product ID label must be on right side (sitting). For left arm only units, staple to left side (sitting). For armless units, staple to bottom rear seat rail. SLEEPERS - Law, Product ID & Fabric Cleaning/ Staple law label to top of inside front rail. Staple product ID & fabric cleaning/ patents labels in the same location as the sofas and loveseats, detailed above. RSS Bottom Page 6 of 7
OTTOMANS AND CONSOLES Refer to the Stapling Specification below. CA TB 117-2013 & SB1019 label, item no. Ottomans, Consoles and Wedges listed below: Ottomans 024 Ottoman 240 Premier ottoman Consoles 3CS Storage console 4CN Narrow wedge console 4CS Storage console 4CW Wedge console OTTOMANS - Law, Product ID & Fabric Cleaning/ Staple the labels to the bottom of the short side rails. The product ID & fabric cleaning/patents labels may be placed side-by-side. Staple below the law label. CONSOLES & WEDGE CONSOLES - Law, Product ID & Fabric Cleaning/ Size and location of bottom rails vary by style; staple the labels to available bottom rails. Do not let labels hang or protrude from underneath the unit. Staple to available bottom rail. Law Label, Production ID Label, Fabric Label and 18.000033 Label Attach all labels and production ticket items face up. Do not stack or overlap labels or ticket items. Attach the production ticket items to the frame, using either two or four staples. When attaching items to a wide wood rail, use four staples, one in each corner as shown here. Stapling Specification When attaching items to a narrow wood rail, use two staples. Position the production ID label and fabric cleaning/patents label with the plain edge parallel to the outside edge of the rail, and staple along the plain edge of the ticket. When using two staples, do not staple along the edge with the form feed holes. Staples Staples To prevent the production ID label, fabric cleaning/ patents label and 18.000033 label from drooping or dropping over time, the labels may be slightly angled and more staples may be used. Plain Edge Page 7 of 7