You will have to discover a range of hidden and disguised tools to reach the final goal. No force is required to open the drawer.

Similar documents
01 1 Labyrinth Puzzle

01 10 Cutter Blades. Fit all 10 pieces into the rectangle tray. Acrylic. Put-together. Copyright 2013 IPP Design Competition All rights reserved.

25 Helical Burr. Take apart and reassemble. SLS nylon. Take-apart

32 Little Maz-N-Cube. Separate the 3 cubes (without using excessive force). ABS & TPR plastic (Livecube) Interlocking / Sequential Movement

Disassemble, then re-assemble the six pieces to form a cluster arrangement of six rhombic dodecahedrons.

01 1 Platypus Egg! Open the egg. Colour pencils, pins, electronics. Copyright 2009 IPP Design Competition All rights reserved. Puzzle Goal: Materials:

wood (koa, maple, ebony, cocobolo, new guinea rosewood) and metal (brass, copper, steel) Secret Opening Box

20 Memory Drawers. Discover the pattern for opening and closing the drawers. Careful: you need to open and close the drawers perfectly.

40 Cat Case. Place four Cat pieces flat in the frames. MDF board 2D put-together. Copyright 2003 IPP Design Competition All rights reserved.

01 Auzzle A2. Collect all the magnets drawn to each other along the equator. Wood, plastic SEQ-GRP

1 8 Arrows Trigo Cube

01 1 Labyrinth Puzzle

01 AC/DC. Two challenges: pack the pieces in the box so that: Both sides are striped One side checkered, one side striped

Construct a pyramid with a triangular or a hexagonal base, and then return the parts back into the box.

1 (Now they know how many holes it takes to fill) The L-Bert Hall

Carving Wax Zig-Zag Rings Brian Meek 2007 V1.0

1 (Now they know how many holes it takes to fill) The L-Bert Hall

01 Golf Ball Cage. Extract, and return golf ball to inside of cube. Walnut, golf ball Misc. Assembly

1 Round Band Puzzle Ring

NOTE: Top section pole (Q) is packed INSIDE bottom section pole (S)

20 Memory Drawers. Copyright 2002 IPP Design Competition All rights reserved. Puzzle Solution:

Mechanical Frappe Press

Hardware and Components:

WARNING: Wear safety goggles at all times when the engine is running and cooling

ILLUSION CONFUSION! - MEASURING LINES -

Parts list continues on Page 2 HOUSE PARTS PACKED IN HOUSE BOX PARTS IN SMALL PLASTIC BAG (HARDWARE) POST PARTS PACKED IN THIS BOX (LARGE PLASTIC BAG)

1 3 Brothers. Open each of the drawers. walnut, tamo, etc. Take apart. Copyright 2002 IPP Design Competition All rights reserved.

The Q Frame PROJECT. a picture frame with secrets created exclusively for the Router Forum

Kontax Stirling Engines KS90 instructions

Mr.Bulletfeeder by Double-Alpha

Harmony Remote Repair

Page 1 of 5. Instructions for assembling your PacknMove boxes

Abstract. Introduction

Read Below! Read Below! Read Below! Read Below! Read Below! Read Below! STOP READ TIPS BELOW TO MAKE ASSEMBLY MUCH EASIER

Tools: Scissors, hand held single-hole punch, metal ruler or other good straight-edge, sharp knife or Exacto-knife.

SE5a Instrument Board part 2 - rev 1.1

Read Below! Read Below! Read Below! Read Below! Read Below! Read Below! STOP READ TIPS BELOW TO MAKE ASSEMBLY MUCH EASIER

Middle School Geometry. Session 2

400GTO Lubrication Guide

Kontax Stirling Engines KS90T instructions

This manual will aid in the assembly of the FireBall V90 and FireBall X90. The assembly of both machines will be identical, unless specified.

Cut-True 16M Manual Paper Cutter

Kontax Stirling Engines KS90R instructions

PET*STAR 4 OPERATOR MANUAL

Midwest RDH Handpiece Repair Procedure

E-FLIGHT BLADE CX COMPLETE DISASSEMBLY JANUARY 2006

FACTORY CAT TOMCAT CORPORATION

HP PSC 2410 Photosmart All In One Printer Scanner Lamp Replacement

Organisational Kitchen Fittings Kitchen Cabinet Accessories

Hardware and Components:

ATTRACTION drawer. Twin-walled seel drawer. Complete. 50 Kilos resistance. indamatic. Range of concealed runners up to. self closing and soft closing.

Exploring Concepts with Cubes. A resource book

Clock 35 - Toyland. Construction instructions for Clock 35

TRICKS & TIPS. Make sure all your equipment is ready before you begin a trick.

Frou Frou Bag Intermediate

Under Seat Storage Drawer Installation Instructions

The Colour-Change Collapsible Cube

Ruby 0-4-0T Kit Assembly Instructions

Kossel Rev B Build Guide V1.0

Copyright 2009, Seymour Products LLC, All rights reserved. GET THE SCREEN, KEEP THE SOUND

Service Manual for XLE/XLT Series Laser Engravers

TM12 ASSEMBLY INSTRUCTIONS

F-F-Fiddle Assembly Instructions

Droplit v2 Frame Assembly

Removing and Replacing the Y-truck

Kontax Stirling Engines KS90S instructions

Elevator Assembly. To assemble the SR3500 Elevator, you will need the following tools:

INSTRUCTION BOOKLET #34. For Wallbed models: KING SIZE SIERRA WITH STORAGE HEADBOARD

ASSEMBLING YOUR L&L EASY-FIRE KILN

Space and Shape (Geometry)

PFT CABLE GYM INSTRUCTION MANUAL

Hop-Stopper Wrangler JK Hood Retainer installation

Steele TV Stand Stock # BH

CHICKEN COOP & CHICKEN RUN. Tools required for assembly (not included)

Single Pass Half-Blind Dovetails

SHAPE level 2 questions. 1. Match each shape to its name. One is done for you. 1 mark. International School of Madrid 1

7878 K940. Checkpoint Antenna. Kit Instructions. Issue B

REPLACEMENT TARP for SRT-2 SPOOL ROLL TARP

SUPPLIES OTHER SUPPLIES Carson 10 Teddy Bear Pattern

Easy-to-Master Professional Caliber Tricks

Assembly Instructions

Deck Mount Installation with Bench

Assembly Instructions: Bencher Skylark

model tsa-sa48 Sliding Crosscut Table installation guide

RRevo. Written By: Bradley Hanstad TOOLS: PARTS:

OKI C911 / 931 / 941

Classic Roll Tarp. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.

WOLF LOOM DOUBLE BACK BEAM

The Useless Machine. DIY Soldering Edition. Instruction Guide v0004

YOUR LIFE. YOUR FIRE. Ortal Curved & Islands Fireplaces Installation Manual. Ortal USA - Version: 1.3 November, 2017 SKU: KPMANCIRISLUS17B

ASHFORD COUNTRY SPINNER 2

RTA-3520 DIMENSIONS MAXIMUM WEIGHT CAPACITIES. Product Size: 47.5"W x 23"D x 30"H

BY ALIEN TECHNOLOGIES CORP

Monster Marionette ART GRADE LEVEL FOURTH FIFTH MATERIALS

tinycylon Assembly Instructions Contents Written by Dale Wheat Version August 2016 Visit dalewheat.com for the latest update!

The Amazing, Folding Puzzle... 2 Meet RUBIK S Magic... 3 Basic Magic... 6 Magic Sequences... 8 Magic Hints Magic Shapes...

HOUSE PARTS PACKED IN HOUSE BOX PARTS IN PLASTIC BAG (HARDWARE) PARTS IN SMALL PLASTIC BAG (FLOOR CLIPS) PARTS PACKED IN BUNDLE

Thread Painting. First Flowers

Ribcage Installation. Part 2 - Assembly. Back-Bone V1.06

HAPPY CHICKEN TRACTOR

Transcription:

40 A Plugged Well Puzzle Goal: Materials: Classification: Notes: Work your way through the puzzle to find the barrel of oil. Walnut, steel elements, and magnets 2.1 Trick or Secret Opening You will have to discover a range of hidden and disguised tools to reach the final goal. No force is required to open the drawer.

40 A Plugged Well Puzzle Solution:

41 Qin Nez Borz Puzzle Goal: Materials: Determine how the "Impossible" nested balls were created. Wood and electronics Classification: Slocum 10

41 Qin Nez Borz Puzzle Solution: The solution/explanation is withheld.

42 Rain Drop Puzzle Goal: Materials: Classification: Remove the glass tube to release the $1 bill. Spalted curly maple, walnut, cocobolo Take-apart

42 Rain Drop Puzzle Solution: Remove the base (by pulling straight off in a downward movement) and set aside. Remove Cocobolo magnetic top piece. Lay Rain Drop on its side, find out which side you can hear the steel ball rolling around on by tilting it end for end. This is the side you want facing up. Take the magnetic piece and wave it over the face side of the lower base section. Pick up the steel ball and try to "drop" it into the middle area, there you will find a small hole to hide the "size" of the ball. You will know when it has fallen into the hole by two ways, first, you may hear it fall into the hole, it has a quiet yet noticeable sound. Second, when you gently tilt the puzzle from end to end, you shouldn't hear the ball rolling around anymore. Gently roll the whole puzzle box onto its next adjacent side (being careful not to spill the ball out of the hole, keep tilted back just a bit). Now roll the Rain Drop over onto its face side, the ball should be trapped within the hole in the block. The block can now be jostled a bit to allow the glass tube to be slid out through the bottom and be removed from the puzzle.

43 Rattle Twist 4 Puzzle Goal: Materials: Classification: Disassemble and reassemble the two pieces inside the frame. Wood Interlocking

43 Rattle Twist 4 Puzzle Solution:

44 Ze RD - Evil Twins Puzzle Goal: Materials: Disassemble and reassemble the three nested geometric puzzles. Wood Classification: Slocum 3.2

44 Ze RD - Evil Twins Puzzle Solution: To open the Outer Shell, spin the ball hard. With the Happy Face facing up, it will expand and explode into 4 pieces Inside is a Rhombic Dodecahedron (RD), its derivative. You can open this by: a) A modified Stewart Coffin 3 finger Pennyhedron opening. Press and pull b) Or spin the structure. It will also expand and explode into 4 pieces The last baby RD inside opens like a rose. By pressing simultaneously the 3 triangles together, it slides and opens in coordinate motion. It has 3 SIMILAR pieces inside, a new discovery. REASSEMBLY Please follow the inside color markers of the pieces to maintain the outside pattern symmetry. For the outer 2 RDs, open and expand 3 of the pieces as far as it will go without collapsing. You use your left hand fingers as a jig. Place the inner RD inside and then slide the last piece in. You hear a click as it just start to close. Now flip the structure upside down and jiggle the inner RD until it is sitting snugly, hexagonal face facing up. The 4 pieces will now close completely. With the baby RD Place all the 3 pieces loosely together matching the color markings You see 2 triangular spaces in the centers, top and bottom. CLOSE OFF one of these triangles by pressing the 3 sides together. Now you can close the other big triangle space.

46 Rhombic Maze Burr Puzzle Goal: Materials: Classification: Notes: Slide maze and pin plates to remove a single exit plate. SLS nylon, stainless steel Sequential movement This is an enhancement of Kagen Schaefer's Maze Burr - using rhombic dodecahedral geometry. It allows for thousands of challenges including one requiring 379 moves to solve.

46 Rhombic Maze Burr Puzzle Solution:

47 Ring and Cherries on a Stick Puzzle Goal: Materials: Classification: Remove the metal ring. Natural form of wood, metal, rope and plastic Topological disentanglement

47 Ring and Cherries on a Stick Puzzle Solution: Follow the steps 1-6 to obtain the configuration 7. Then repeat the steps 1-6 with the other cherry and obtain the configuration 8, which yields the solution.

48 Six of One, Half a Dozen of the Other Puzzle Goal: Materials: Classification: Notes: Disassemble and assemble. Queensland walnut 3.4 Burr puzzles Magnets are used to improve the feel, and not theoretically necessary for the puzzle. The level of the puzzle is 13-1-4-1-1-2, it is challenging but not too difficult.

48 Six of One, Half a Dozen of the Other Puzzle Solution:

49 Slide Twist Twist Slide Puzzle Goal: Materials: Classification: Notes: Make a 3x4x4 block of gold cubes. Plastic, gold paint, 3 x Eastsheen 2x2x2s SEQ-GRP, ASS-CART The puzzle consists of three differently shaped parts--each with a 2x2x2 cube core which can twist and be scrambled.

49 Slide Twist Twist Slide Puzzle Solution:

50 Snake Case Puzzle Goal: Materials: Classification: Notes: Arrange so that the snake hides completely inside its case. Wood and cotton 3-D assembly No undue force is required. So please treat the snake gently, and do not stretch the snake too hard.

50 Snake Case Puzzle Solution: Follow the illustrated process to change the tube into a torus with a hole. Please reset this puzzle by following the process backwards after you enjoyed it.

51 Symmetrick Puzzle Goal: Materials: Classification: Lay the pieces flat to make a symmetric shape. Oak 1.1 2-Dimensional assembly

51 Symmetrick Puzzle Solution:

52 T4-II (Tea For Two) Puzzle Goal: Materials: Classification: Put the four pieces into the box. Wood, acrylic Put-together, sliding pieces

52 T4-II (Tea For Two) Puzzle Solution: Solution unavailable.

53 TetraCubed Puzzle Goal: Materials: Classification: Fit all eight pieces into the box so that the cubes do not touch each other. Also, make a solid figure from the four dark pieces. Wood, plastic Put Together and box-packing, and dexterity

53 TetraCubed Puzzle Solution: Hint: This is really three separate problems: 1. Build a regular tetrahedron using the dark pieces 2. Fit the tetrahedron into the box 3. As you close the box, place the cubes into each of the four empty spaces Solution: 1. To put the tetrahedron together, notice that the 4 pieces are two mirror-image pairs. Each piece has 6 triangular faces and 2 quadrilaterals. The large quadrilateral face has a right angle corner, and the smaller one doesn't. Take two of the identical pieces and put the two smaller quadrilaterals together. This will make one edge of the tetrahedron, and leave 4 triangular faces together opposite the edge. Put the other two pieces together (to make the opposite edge), and put the two sets of 4 triangles together to make the large tetrahedron. 2. To put the tetrahedron in the plastic box, just make sure each edge of the tetrahedron is exactly on the diagonal of a face of the cube. You will find that the empty spaces between the tetrahedron and the cube exactly allow for one of the small cubes to be in each corner of the box that doesn't have a tetrahedron vertex. 3. Use two small cubes in corners to hold the lower half of the tetrahedron, and then to hold the tetrahedron in place (with one hand) while putting the top half of the plastic cube on with the other. If you let one of the small cubes stick out a very little bit, it will hold the top half up so you can insert the last two wood cubes

54 Tetrakis Puzzle Goal: Materials: Classification: Assemble the four identical board pieces into the cubic frame. Padauk and maple Interlocking

54 Tetrakis Puzzle Solution:

55 Tetromino Tablet 18 Puzzle Goal: Materials: Classification: Put the five tetromino pieces into the frame. Wood, MDF, acrylic Put-together, sliding pieces

55 Tetromino Tablet 18 Puzzle Solution: Solution unavailable.

56 Triangle Puzzle Goal: Materials: Classification: 1) Make one square using all pieces 2) Make two squares using all pieces 3) Make as many different-sized squares as possible. 4) Make as many different-sized triangles as possible. Oiled beech Put-together

56 Triangle Puzzle Solution:

57 Tri-Symmetrics Puzzle Goal: Materials: Classification: In the given position, this object has 120 rotational symmetry. Make a new object that is even "more symmetrical": simultaneously with 120 rotational, 180 rotational, mirror, and central/point symmetries. Oak wood Put-together

57 Tri-Symmetrics Puzzle Solution:

59 Washington Monument Puzzle Goal: Materials: Classification: Notes: Unlock and open the puzzle, then close and then relock it. Wood (silver ash and jarrah), steel, and magnets 2.1 Trick or Secret Opening To open the puzzle, you must lock the internal gravity pins inside the round base. If you open the puzzle by chance then the gravity pins will still move freely--this is not the intended solution. To relock the puzzle, you must release the gravity pins so they move freely again. All the tools you ll require to solve the puzzle are given with the puzzle. Take care not to lose the "lightening rod" at the top.

59 Washington Monument Puzzle Solution:

60 ZooLogical Garden #2 Puzzle Goal: Materials: Classification: Notes: Put four white pieces into the tray. Put any three white pieces and the red piece into the tray. Acrylic Put-together The blue piece is anchored with the screw inside the tray, but can be rotated.

60 ZooLogical Garden #2 Puzzle Solution: Solution unavailable.