High Power/Signal Connectors for Industrial Machinery

High Power/Signal Connectors for Industrial Machinery PQ Series Variations PQ50W Non water-resistant 20 position type Non water-resistant 48 position type Water-resistant 50 pos. type Contact (9A/pin) type Contact (2.5A/pin) type Contact (2.5A/pin) type PQ50S General PQ50 The PQ series is an interface connector designed to handle high power/signal connections in industrial machinery. Available in a water-resistant or non-waterresistant type, they are capable of handling up to 2.5A/ pin (PQ50S and PQ50W) or 9A/pin (PQ50). Features Side locking structure emits a tactile click and produces a secure lock PQ50 and PQ50S Series [ Non water-resistant type ] Clear tactile click!. Side locking spring structure delivers a clear tactile click. The left and right buttons disengage the mated lock. (Side locking system). The easy mating operation delivers a clear tactile click. (Fig.) 2. Strengthened cable clamps Cable clamp strength is 98N or more. (* Actual is 400N or more.) The structure will prevent the mated connecter and clamp from detaching against excessive forces. Easy extraction Fig.. Different cover options A robust, enhanced, shielded die-cast shell is available on the PQ50 series or a engineered, light weight plated plastic resin shell for the PQ50S series. The die cast shell delivers an enhanced EMI shield on the PQ50 series and the plated plastic resin of the PQ50S series cover case and panel shell ensure ESD and EMI performance. It is possible to insert the terminated housing from the rear Panel Shell M Screw Housing 4. Coding key system provides flexibility with multiple options The coding key system prevents incorrect mating and has multiple variations available. 5. Rear mounted panel shell is available. Chassis Panel Female Contact After attaching the panel shell to the chassis, it is possible to install or remove the crimp housing. (Fig.2) 6. Reliable ground connection structure. Fig.2 Easy and reliable ground connection The crimp contacts can be mounted directly onto the panel shell with screws which enhances the grounding connections. (Fig.) 7. Supports NFPA79 compliant cables (with 600V capability). (PQ50 Series) Due to restrictions on the AWM cables by NFPA79 revision, the requirements of listed cables has increased for wires used in industrial machines in the U.S.A. This product complies with the restrictions and requirements of NFPA79. JIS C2805 (R type, N type) or equivalent Fig. 207.③

[Water-resistant type] PQ50W Series Special locking structure with lever. Water resistant (IP65) Rated at IP65 when in the mated condition. 2. Special locking structure. Special lever and cam structure delivers easier operation and assists with the insertion and extraction of this connector. (Fig.). Rear mounted unit offers easy operations. Male and Female plastic crimp case can be installed not only for panel side metal shell but also plug side one. (Fig.2) 4. Metal plated cover of engineering plastic resin adds strength and EMI protection. This robust connector uses a metal plated material of special engineering plastic for the cover and panel shell to ensure high ESD and EMI performance. Fig. Supports mounting from the backside of the panel 5. Independent ground contact structure. Secure grounding is accomplished by use of the plated plastic cover and the independent ground contacts. (Fig.) Panel Side Plug Side 6. Coding key system provides flexibility with multiple options The coding key system prevents incorrect mating and has multiple variations available. Panel Side:Female Cont. Panel Side:Male Cont. Plug Side: Male Cont. Plug Side: Female Cont. [Contact variations] Fig.2. Available contact options Two styles are available; one with 9A/pin contacts or one with 2.5A/pin contacts. Independent Ground Contacts 2. Lance protection structure The side wall of the contact prevents lance deformation and helps to prevent tangled wires. (Fig.4). Sequential contacts of different length are available Two types of different contact length are available for the male contact. (Fig.5) Independent Ground Contacts 4. Highly reliable contact structure The female contact assures a reliable connection by using multiple contact points and a unique spring structure. (Fig.6) Lance Protection Structure [ 9A/pin type ] Male contact Different length sequential contacts [ 9A/pin type ] Lance Sequence Contact (Long) Female contact Fig. Highly Reliable Contact Structure [ 9A/pin type ] Point Contact [ 2.5A/pin type ] 2 Point Contact Spring Deflection Spring Deflection Standard Contact [ 2.5A/pin type ] Male contact Lance protection guard Lance Female contact.2mm [ 2.5A/pin type ] Two types of contacts can be used depending on application Sequence Contact (Long) Lance protection guard Fig.4 2.2mm Multiple contact points and very flexible spring design. Standard Contact Fig.5 Fig.6

Product Specifications [Non water-resistant type] PQ50 Series Voltage Ratings Current AC/DC 600V With UL05 6 AWG 9A/pin Items. Contact resistance 2. Insulation resistance. Withstand voltage 4. Durability 5. Vibration resistance 6. Shock resistance 7. Temperature cycles 8. Moisture resistance in steady state 9. Salt water spray * Depending on current capacity of the cable used. Specifications 0mø max Operating Temp. Range 40ç to +05ç Storage Temp. Range 55ç to +85ç Conditions Measured at 00mA Minimum of 5,000Mø Measured at DC 500V No flashover or breakdown. Contact resistance: Increase by 0mø or less from the initial value. Apply AC 2,200V for one minute. qno electrical discontinuity of 0µs or more. wno broken, cracked or loosened parts. qchange of contact resistance: 20mø or less winsulation resistance: minimum of,000mø eno broken, cracked or loosened parts. qchange of contact resistance: 20mø max winsulation resistance: minimum of,000mø (after drying). eno breakage, cracks or loosened parts. No significant corrosion or damage that impairs functioning. Perform 500 mating cycles. Frequency 0 to 55 Hz (5 min/cycle). With half amplitude 0.75mm, 2 hours each for directions. Acceleration 490m/s2, duration ms, half-sine wave, times each for 6 axial directions. Temperature: 55 +5 to 5 +05 +5 to +5ç Time: 0 2 to 0 2 to min. Subjected to 5 cycles of time and temp as noted. Left in environment of 60ç ±2 and humidity of 90% to 95% for 96 hours. 5% concentration of salt water spray for 48 hours. (in mated condition) Excluding conductor resistance of the cable. *For test methods not described here, JIS C 5402 is applied. [ Non water-resistant type ] PQ50S Series Voltage Rating Current AC/DC 00V 2.5A/pin Items. Contact resistance 2. Insulation resistance. Withstand voltage 4. Durability 5. Vibration resistance With UL007 8 AWG * Depending on current capacity of the cable used. Specifications 5mø max 8. Moisture resistance in steady state 9. Salt water spray 40ç to +05ç Storage Temp. Range 55ç to +85ç Conditions Measured at 00mA Minimum of 5,000Mø Measured at DC 500V No flashover or breakdown. Contact resistance: Increase by 0mø or less from the initial value. Apply AC 2,200V for one minute. qno electrical discontinuity of 0µs or more. wno broken, cracked or loosened parts. 6. Shock resistance 7. Temperature cycles Operating Temp. Range qchange of contact resistance: 0mø or less winsulation resistance: Minimum of,000mø eno broken, cracked or loosened parts. qchange of contact resistance: 0mø or less winsulation resistance: Minimum of,000mø (after drying). eno broken, cracked or loosened parts. No significant corrosion or damage that impairs functioning. Perform 500 mating cycles. Frequency 0 to 55 Hz (5 min/cycle) With half amplitude 0.75mm, 2 hours each for directions. Acceleration 490m/s2, duration ms, half-sine wave, times each for 6 axial directions. Temperature: 55 +5 to 5 +05 +5 to +5ç Time: 0 2 to 0 2 to min. Subjected to 5 cycles of time and temp. as noted. Left in environment of 60ç ±2 and humidity of 90% to 95% for 96 hours. 5% concentration of salt water spray for 48 hours. (in mated condition) Excluding conductor resistance of the cable. *For test methods not described here, JIS C 5402 is applied.

[ Water-resistant type ] PQ50W Series With 2.5A/pin type contacts Ratings Voltage Current Items. Contact resistance 2. Insulation resistance. Withstand voltage 4. Durability 5. Vibration resistance 2.5A/pin AC/DC 00V With UL007 8 AWG * Depending on current capacity of the cable used. 8. Moisture resistance in steady state 9. Salt water spray 0. Water resistance 40ç to +05ç Storage Temp. Range 55ç to +85ç Specifications Conditions 5mø max Measured at 00mA Minimum of 5,000Mø Measured at DC 500V No flashover or breakdown. Contact resistance : Increase by 0mø or less from the initial value. Apply AC 2,200V for one minute. qno electrical discontinuity of 0µs or more. wno broken, cracked or loosened parts. 6. Shock resistance 7. Temperature cycles Operating Temp. Range qchange of contact resistance: 0mø or less winsulation resistance :,000Mø or more eno broken, cracked or loosened parts. qchange of contact resistance : 0mø or less winsulation resistance :,000Mø or more (after drying) eno broken, cracked or loosened parts. No significant corrosion or damage that impairs functioning. IP65 Perform 500 mating cycles. Frequency 0 to 55 Hz (5 min/cycle) With half amplitude 0.75mm, 2 hours each for directions. Acceleration 490m/s2, duration ms, half-sine wave, times each for 6 axial directions. Temperature : 55 +5 to 5 +05 +5 to +5ç Time : 0 2 to 0 2 to min. Subjected to 5 cycles of time and temp. as noted. Left in environment of 60ç ±2 and humidity of 90% to 95% for 96 hours. 5% concentration of salt water spray for 48 hours. (in mated condition) Excluding conductor resistance of the cable. *For test methods not described here, JIS C 5402 is applied. Materials / Finish PQ50 Series Item Parts Crimp case Panel Shell Crimp case Crimp case Shell Cover case M4 pan head machine screw Clamp metal Crimp case In-line plug shell In-line cover case M4 pan head machine screw Clamp metal Materials PBT resin Zinc die cast PBT resin Stainless steel Zinc die cast Item Parts Crimp case Receptacle Panel Shell Materials PBT resin Heat-resistant engineering plastic resin Brass PBT resin Stainless steel Heat-resistant engineering plastic resin Steel Brass Receptacle Plug In-line plug Steel Steel PBT resin Finish Remarks Finish Remarks Zinc die cast Steel Steel PQ50S Series M4 insert nut Crimp case Crimp case Shell Plug Cover case Clamp metal M4 insert nut 4

PQ50W Series Item Crimp case Parts Crimp case Panel Shell Ground contact O-ring for mating Lock lever Rubber packing Receptacle Plug shell Materials PBT resin Heat-resistant engineering plastic resin Stainless steel NBR PA resin NBR Heat-resistant engineering plastic resin Stainless steel Ground contact M2 tapping screw Steel Cover case Gasket NBR Clamp metal (body) Heat-resistant engineering plastic resin Cable clamp M insert nut Brass M pan head machine screw Steel Plug Finish Remarks Trivalent chromate Red Finish Remarks Contacts (PQ50, PQ50S, PQ50W) PQ50-5PCFA PQ50A -5PCFA PQ50-5SCFA PQ50-68PCFA PQ50A -68PCFA PQ50-68SCFA PQ50-2022PCFA PQ50A -2022PCFA PQ50-2022SCFA PQ50S -822PCFA PQ50SA-822PCFA PQ50S -822SCFA PQ50S -2428PCFA PQ50SA-2428PCFA PQ50S -2428SCFA Parts Materials Male contact Female contact Male contact Female contact Male contact Copper alloy Female contact Gold plating (contact area) + Tin plating (barrel area) Male contact Female contact Male contact Female contact Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. Crimp Housing PQ 50 W S 25 P UNIT ❶ ❷ ❸ ❹ ❶ Series name ❷ Wiring style ❸ Connector specifications ❹ Contact size ❺ Shell size ❻ Contact type ❼ Shapes ❺ ❻ ❼ PQ Crimping W Water-resistant type S Small contact (2.5A/pin) type 25 25 pos. unit 20 20 pos. unit P Male contact UNIT Rear mount multiple unit (PQ50W) None Non water-resistant type None Standard contact (9A/pin) type 48 48 pos. unit S Female contact None (PQ50, PQ50S) Crimp contact PQ 50 S A 822 PC F A ❶ ❷ ❸ ❹ ❶ Series name ❷ Wiring style ❸ Contact size ❹ Contact usage ❺ Applicable cable type ❻ Contact type ❼ Contact shapes ❽ Contact plating type ❺ ❻ ❼ ❽ PQ Crimping S Small contact (2.5A/pin) type A Sequence contact (long contact) 5 4 to 5 AWG (UL05) 68 6 to 8 AWG (UL007, UL05) 822 8 to 22 AWG (UL007) 7 AWG PC Male contact F End-to-end contacts (on reel) A Gold plating (contact area) None Standard contact (9A/pin) type None Standard contact 2022 20 to 22 AWG (UL007, UL05) 2428 24 to 28 AWG (UL007) 2 AWG SC Female contact None Discrete contacts 5

Clamp metal PQ W CM (7.5) ❶ ❷ ❸ ❶ Series name ❷ Connector specifications ❸ Clamp name ❹ Applicable cable diameter ❹ PQ W Water-resistant type CM Clamp metal (5.0) For applicable cable diameter Ø5.0 (7.5) For applicable cable diameter Ø7.5 (22.0) For applicable cable diameter Ø22.0 None Non water-resistant type PQ50, PQ50S Series PQ 50 S 48 P PC M ❶ ❷ ❸ ❹ ❶ Series name ❷ Wiring style ❸ Contact size ❹ Shell size ❺ Contact type ❺ ❻ ❼ PQ Crimping S Small contact (2.5A/pin) type 20 20 pos. shell type P Male contact PC Plug cover case FL Panel shell M Heat-resistant engineering plastic resin ❻ Case type ❼ Case material None Standard contact (9A/pin) type 48 48 pos. shell type S Female contact JC In-line plug cover case DS In-line plug shell None Zinc die cast PQ50W Series PQ 50 W 50 PC ❶ ❷ ❸ ❹ ❶ Series name ❷ Wiring style ❸ Connector specifications ❹ Shell size ❺ Case type ❺ PQ Crimping Water-resistant type 50 50 pos. shell type PC Plug cover case FL Panel shell Functional Diagram PQ50, PQ50S Series qpanel mount receptacle (Female contact) wcable plug ein-line cable plug (Male contact) (Female contact) PQ50W Series qpanel mount receptacle 6 wcable plug

Panel mount receptacle PQ50 Series Crimp case (9A/pin, for female contact) 8.6 8.6 27 28.4 (P=4.6) 27.8 25.6.7 (P=6.2) 6.2 27. 8.4 9.2 26-204-2 00 50 pcs/box PQ50-20S(0) 26-204-2 0 R2MAX (9.4) X MA R2 8.6 9.4.2 27.2(intersection) PQ50-20S-FL 26-200-0 00 50 pcs/box PQ50-20S-FL(0) 26-200-0 0 8.4 48 Recommended panel dimensions for attaching panel shell from panel s front side. 2.2 0.7 4.2.2(intersection) 0.5 48.6±0. 5.5±0. X MA 2 (intersection) Panel Shell 6 5.5 48 8.6 40.6±0. 2-M 0.5 (through hole).2±0. PQ50-20S 40.6±0. R2MAX 46.6.2±0. 6.6±0. 22.±0. R2 2-M4 0.7(through hole) 2-M 0.5(through hole) 2-Ø4.±0.2 R2 28.4±0. 5.5±0. MA X AX M R2 Recommended panel dimensions for attaching panel shell from panel s back side. Cable Plug PQ50 Series Crimp case (9A/pin, for male contact) (P=4.6) E D C (P=6.2) 6.2 27 8.4 9.2 B. A A 2.8 8.8 8.6 28.6 2 B C D E 2 4 4 PQ50-20P (48.8) PQ50-20P 26-20-4 00 50 pcs/box PQ50-20P(0) 26-20-4 0 27 Plug Cover case 2 4.2 42.8 (6) JIS B 88 M4 0.7 6 M4 0.7 M4 0.7 8. Ø4. 56.5 64 M4 0.7 9 PQ50-20P-PC 26-2000-8 00 50 pcs/box PQ50-20P-PC(0) 26-2000-8 0 48.8.2 28 7.6.5 2.5 5. 6.6±0. 2±0. PQ50-20S R 2.5 7

In-Line Cable Plug PQ50 Series 2 In-line Plug Cover case JIS B 88 M4 0.7 6 (6) 8.6 42.8 M4 0.7 M4 0.7 8. Ø4. 56.5 64 M4 0.7 9 7.6 48.8 PQ50-20S-JC 26-2002- 00 50 pcs/box PQ50-20S-JC(0) 26-2002- 0.2 28.5 2.5 5. R 2. 5 In-line Plug shell 40.5 8.6 0.2.2. 27.2 PQ50-20S-DS 26-205-5 00 50 pcs/box PQ50-20S-DS(0) 26-205-5 0 Cable Plug PQ50S Series Crimp case (2.5A/pin, for male contact) (P=.85).85.55 4 26.25 8.75.25 F E D C B 2.8 G A 9.25 28.6 2 4 5 6 8.8 H..75 (P=.75) A B C D E 2 4 5 6 PQ50S-48P (55.8) PQ50S-48P 26-202- 00 60 pcs/box PQ50S-48P(0) 26-202- 0 Plug Cover case (6) JIS B 88 M4 0.7 6 50 M4 0.7 6.5 Ø4. 64 79 M4 0.7 6.5 PQ50S-48P-PCM 26-200-6 00 60 pcs/box PQ50S-48P-PCM(0) 26-200-6 0 7.6 56 8.2 28 5 2. R 4 7.6 8 M4 0.7 F G H

Panel mount receptacle PQ50S Series Crimp cace (2.5A/pin, for female contact).7 8.6.5 9.25 27 28.4 P=.75 27.95 25.75 P=.85.55 4. 26.25 8.75.25 H G F E D C B A 2 4 5 6 PQ50S-48S 26-2024-6 00 60 pcs/box PQ50S-48S(0) 26-2024-6 0 58.5±0. 47.6±0. (46.4) 2-M 0.7 (through hole) 0.7 7.6 4.8 45.6 2.8. R2MAX 59.6±0. R2 MAX 58.5±0. 47.6±0. PQ50S-48S-FLM 26-2004-9 00 60 pcs/box PQ50S-48S-FLM(0) 26-2004-9 0 49.4 5. (intersection) 57.6 56 (intersection) Clamp metal common for PQ50 and PQ50S Series.2±0. 2-Ø4.±0.2 R2MAX Recommended panel dimensions for attaching panel shell from panel s front side..2 69.7 58.5 56 (intersection) 45.6 6.6±0. 2.8±0. Panel Shell 6.6±0. 22.8±0..2±0. M4 0.7 6.5 R2 MAX R2 MAX Recommended panel dimensions for attaching panel shell from panel s back side. 6.±0. Clamp metal for Ø5.0mm cable type 7.6 JIS B 88 M4 0.7 2 M4 0.7 5.5.6 (2) 2-4.4 45.4 2.5 (intersection) PQ-CM(5.0) 26-2005- 00 60 pcs/box PQ-CM(5.0)(0) 26-2005- 0 5 0 Clamp metal for Ø22.0mm cable type 7.6 JIS B 88 M4 0.7 2 (2) 2-4.4 PQ-CM(22.0) 26-20-0 00 50 pcs/box PQ-CM(22.0)(0) 26-20-0 0.9.5 45.4 27 M4 0.7 22 0 R2M AX PQ50S-48S 9

Cable Plug PQ50W Series Crimp case (2.5A/pin, for male contact) 6.85 20.6 No.A No.A5 PQ50WS-25P-UNIT 26-202-8 00 No.E 2.9 4.8 24.9 7.4 9.5 5 7.5 No.E5 Crimp case (2.5A/pin, for female contact) 9.5 5 7.5 PQ50WS-25S-UNIT 26-2022-0 00 No.E No.A No.E5 No.A5 2.9 4.8 24.9 7.4 6.85 20.6 Panel mount receptacle PQ50W Series 4.9 5.8 Panel Shell (6.) (5) (28) (02) PQ50W PQ50W-50-FL 26-2020-5 00 B 44. 65.8 B 58.8±0. 50±0. 2.4±0. 27.4±0. R2.5MAX 4-M (through hole) Panel dimensions for attaching panel shell from panel s front side. 0

Cable Plug PQ50W Series Cover Case PQ50W-50-PC 26-208- 00 (2.45) 55.5 5.9 Metal Cable Clamp for PQ50W Series Cable clamp for Ø7.5mm cable type 4 5.5 27 28 () 65.5 80.5.5 PQW-CM(7.5) 26-209-6 00

Crimp Contacts Male contact (9A/pin type) PQ50A-**PC*A 2.2 24.5 2.5 PQ50-**PC*A 0.9.8 2.2 0.9.8 Applicable Cables PQ50-5PCFA(Note) 26-206-8 00,500 pcs/reel 4 to 5 AWG (UL05) insulator outer diameter max. Ø.mm PQ50A-5PCFA 26-207- 00,500 pcs/reel 4 to 5 AWG (UL05) insulator outer diameter max. Ø.mm PQ50-68PCFA 26-2006-4 00,500 pcs/reel 6 to 8 AWG (UL007, UL05), insulator outer diameter max. Ø.mm PQ50A-68PCFA 26-2007-7 00,500 pcs/reel 6 to 8 AWG (UL007, UL05), insulator outer diameter max. Ø.mm PQ50-2022PCFA 26-20- 00,500 pcs/reel 20 to 22 AWG (UL007, UL05), insulator outer diameter max. Ø2.7mm PQ50A-2022PCFA 26-202-4 00,500 pcs/reel 20 to 22 AWG (UL007, UL05), insulator outer diameter max. Ø2.7mm PQ50-5PCA 26-207-8 00 00 pcs/pack 4 to 5 AWG insulator outer diameter max. Ø.mm PQ50A-5PCA 26-207- 00 00 pcs/pack 4 to 5 AWG insulator outer diameter max. Ø.mm PQ50-68PCA 26-208-0 00 00 pcs/pack 6 to 8 AWG (UL007, UL05), insulator outer diameter max. Ø.mm PQ50A-68PCA 26-2040-2 00 00 pcs/pack 6 to 8 AWG (UL007, UL05), insulator outer diameter max. Ø.mm PQ50-2022PCA 26-209- 00 00 pcs/pack 20 to 22 AWG (UL007, UL05), insulator outer diameter max. Ø2.7mm PQ50A-2022PCA 26-204-5 00 00 pcs/pack 20 to 22 AWG (UL007, UL05), insulator outer diameter max. Ø2.7mm Note : Please see ATAI-E2926 for the details of UL05 4 AWG cable crimping. 8.9 Female contact (9A/pin) type 2.9.9 Applicable Cables PQ50-5SCFA(Note) 26-207-0 00,500 pcs/reel 4 to 5 AWG (UL05) insulator outer diameter max. Ø.mm PQ50-68SCFA 26-2008-0 00,500 pcs/reel 4 to 5 AWG (UL007, UL05), insulator outer diameter max. Ø.mm PQ50-2022SCFA 26-200- 00,500 pcs/reel 20 to 22 AWG (UL007, UL05), insulator outer diameter max. Ø2.7mm PQ50-5SCA 26-204-0 00 00 pcs/pack 4 to 5 AWG (UL007, UL05), insulator outer diameter max. Ø.mm PQ50-68SCA 26-2044- 00 00 pcs/pack 6 to 8 AWG (UL007, UL05), insulator outer diameter max. Ø.mm PQ50-2022SCA 26-2045-6 00 00 pcs/pack 20 to 22 AWG (UL007, UL05), insulator outer diameter max. Ø2.7mm Note : Please see ATAI-E08 for the details of UL05 4 AWG cable crimping. 2

Crimp Contacts Male contact (2.5A/pin type) PQ50S-****PC*A PQ50SA-****PC*A Wire gauge marking 2.2 0.7 2.5 2.25.5 2.5 0.7 2.25 Applicable Cables PQ50S -822PCFA 26-2025-9 00 6,000 pcs/reel 7 to 22 AWG (UL007), insulator outer diameter max. Ø2.25mm PQ50SA-822PCFA 26-2029-0 00 6,000 pcs/reel 7 to 22 AWG (UL007), insulator outer diameter max. Ø2.25mm PQ50S -2428PCFA 26-2027-4 00 6,000 pcs/reel 2 to 28 AWG (UL007), insulator outer diameter max. Ø.8mm PQ50SA-2428PCFA 26-200-9 00 6,000 pcs/reel 2 to 28 AWG (UL007), insulator outer diameter max. Ø.8mm PQ50S -822PCA 26-2046-9 00 00 pcs/pack 7 to 22 AWG (UL007), insulator outer diameter max. Ø2.25mm PQ50SA-822PCA 26-2048-4 00 00 pcs/pack 7 to 22 AWG (UL007), insulator outer diameter max. Ø2.25mm PQ50S -2428PCA 26-2047- 00 00 pcs/pack 2 to 28 AWG (UL007), insulator outer diameter max. Ø.8mm PQ50SA-2428PCA 26-2049-7 00 00 pcs/pack 2 to 28 AWG (UL007), insulator outer diameter max. Ø.8mm Female contact (2.5A/pin type) 2.5 822S Wire gauge marking 7.8 822P 822P.5 24.4 Wire gauge marking 2.5 2.25 PQ50S-822SCFA Applicable Cables 26-2026- 00 6,000 pcs/reel 7 to 22 AWG (UL007), insulator outer diameter max. Ø2.25mm PQ50S-2428SCFA 26-2028-7 00 6,000 pcs/reel 2 to 28 AWG (UL007), insulator outer diameter max. Ø.8mm PQ50S-822SCA 26-2050-6 00 00 pcs/pack 7 to 22 AWG (UL007), insulator outer diameter max. Ø2.25mm PQ50S-2428SCA 26-205-9 00 00 pcs/pack 2 to 28 AWG (UL007), insulator outer diameter max. Ø.8mm

Coding Key System For 9A/pin type crimp case 2.9 5.95 27.7 24.8 PQ50-SC-KY 26-2009-2 00 00 pcs/pack For 2.5A/pin type crimp case 27.8.05.8 2.2 2.7 PQ50S-SC-KY 26-20-7 00 00 pcs/pack Contact Extraction Tools For 9A/pin type crimp housing Ø7 80 PQ50/RE-MD PQ50/RE-MD 902-220-0 00 For 2.5A/pin type crimp housing PQ 50 S/RE-MD PQ50S/RE-MD 4 Ø0 75 902-2202-2 00

Hand Crimp Tool The complete hand tool with crimper frame () is available for each terminal and wire gauge. Parts (2) to (8) can be ordered to accommodate repairs and to be able to switch to other wire gauges without having to purchase another complete tool. ①Crimper Frame HT702 qcrimper Frame 250-00- 00 * Unit Name Upper row: Lower row: PQ50-68(007) 250-002-4 PQ50-68(05) 250-00-7 PQ50A-68(007) 250-004-0 PQ50A-68(05) 250-005-2 PQ50-2022(007) 250-006-5 PQ50-2022(05) 250-007-8 HT702 250-00- Switch wire crimper and insulation crimper die according to the wire size being used. PQ50A-2022(007) 250-008-0 PQ50A-2022(05) 250-009- Applicable Cables Applicable Contacts PQ50-68PCA PQ50-68SCA PQ50-68PCA PQ50A-68PCA PQ50-2022PCA PQ50-2022SCA PQ50-2022PCA PQ50A-2022PCA UL UL007 UL05 UL007 UL05 UL007 UL05 UL007 UL05 AWG 6 8 6 8 6 8 6 8 20 22 20 22 20 22 20 22 wic (Insulation Crimper) 2869 250-002-4(6) 285990 250-00-7(6) 2869 250-004-0(6) 285990 250-005-2(6) 28697 250-006-5(6) 2869 250-007-8(6) 28697 250-008-0(6) 2869 250-009-(6) PQ50-4(05) 250-09-7 PQ50-5PCA PQ50-5SCA UL05 4 286629 250-09-7(6) PQ50A-4(05) 250-02-9 PQ50-5PCA PQ50A-5PCA UL05 4 286629 250-02-9(6) PQ50S-820(007) 250-00-2 PQ50S-2022(007) 250-0-5 PQ50SA-820(007) 250-02-8 PQ50SA-2022(007) 250-0-0 8 PQ50S-822PCA PQ50S-822SCA UL007 20 22 8 PQ50SA-822PCA UL007 20 22 28629 250-00-2(6) 286220 250-0-5(6) 28629 250-02-8(6) 286220 250-0-0(6) Ex.: When unit PQ50-68 (007) is purchased as a whole, all of parts (2) through (8) are included. If the insulation crimper (IC) only is needed for PQ50-68(007), then 250-002-4 6 should be ordered. 5

Powered by TCPDF (www.tcpdf.org) Upper row: / Lower row: ucontact Holder ewc ria twa icrimper Spacer ycontact Holder A B/C (Wire Crimper) (Insulation Anvil) (Wire Anvil) 28599 285992 28599 285995 250-002-4(62) 250-002-4(6) 250-002-4(64) 250-002-4(65) 250-002-4(66) 250-002-4(67) 28599 285992 28599 285995 250-00-7(62) 250-00-7(6) 250-00-7(64) 250-00-7(65) 250-00-7(66) 250-00-7(67) 28599 285992 28599 28692 250-004-0(62) 250-004-0(6) 250-004-0(64) 250-004-0(65) 250-004-0(66) 250-004-0(67) 28599 285992 28599 28692 250-005-2(62) 250-005-2(6) 250-005-2(64) 250-005-2(65) 250-005-2(66) 250-005-2(67) 28694 285992 28696 285995 250-006-5(62) 250-006-5(6) 250-006-5(64) 250-006-5(65) 250-006-5(66) 250-006-5(67) 28694 285992 28696 285995 250-007-8(62) 250-007-8(6) 250-007-8(64) 250-007-8(65) 250-007-8(66) 250-007-8(67) 28694 285992 28696 28692 250-008-0(62) 250-008-0(6) 250-008-0(64) 250-008-0(65) 250-008-0(66) 250-008-0(67) 28694 285992 28696 28692 250-009-(62) 250-009-(6) 250-009-(64) 250-009-(65) 250-009-(66) 250-009-(67) 28660 2866 28662 285995 250-09-7(62) 250-09-7(6) 250-09-7(64) 250-09-7(65) 250-09-7(66) 250-09-7(67) 28660 2866 28662 28692 250-02-9(62) 250-02-9(6) 250-02-9(64) 250-02-9(65) 250-02-9(66) 250-02-9(67) 28622 286225 286226 2862 28624 250-00-2(62) 250-00-2(6) 250-00-2(64) 250-00-2(65) 250-00-2(66) 250-00-2(67) 286224 286225 286226 2862 28624 250-0-5(62) 250-0-5(6) 250-0-5(64) 250-0-5(65) 250-0-5(66) 250-0-5(67) 28622 286225 286226 2862 28625 250-02-8(62) 250-02-8(6) 250-02-8(64) 250-02-8(65) 250-02-8(66) 250-02-8(67) 286224 286225 286226 2862 28625 250-0-0(62) 250-0-0(6) 250-0-0(64) 250-0-0(65) 250-0-0(66) 250-0-0(67) Ex.: When unit PQ50-68 (007) is purchased as a whole, all of parts (2) through (8) are included. If the insulation crimper (IC) only is needed for PQ50-68(007), then 250-002-4 6 should be ordered. 6 2-6-,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +8-45-620-526 Fax: +8-45-59-726 http://www.hirose.com http://www.hirose-connectors.com The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 0/207. Contents are subject to change without notice for the purpose of improvements.