M- CORE RIG PARTS LIST July, 0 Part # 800
Table of Contents Pictorial Page Index Angle Complete Combination Stand without Motor... Pictorial Page Index Standard Complete Anchor Stand without Motor... Pictorial Page Index Angle Complete Anchor Stand without Motor... Pictorial Page Index Complete Combination Stand without Motor... Angle Anchor and Standard Anchor Stands... 8 Angle and Standard Combination Stands... 9 Angle Combination Base Assembly... 0 - Combination Base Assembly... - Angle Anchor Base Assembly... Anchor Base Assembly... Angle Brace Assembly... Wheel Assembly... Carriage Assembly with Motor Mount - CB00 and Weka Motors... 8-9 Carriage Assembly with Motor Mount CB8 and Milwaukee Motors... 0 - Motor Mount Assemblies Weka and Milwaukee Motors... Vacuum Pump Assembly... - Dual Switch/Dual Outlet Control Panel (V)... - Dual Switch/Dual Outlet Control Panel (V) for Weka Motor... 8-9 Masts with Gear Rack... 0 Angle Masts with Gear Rack... Warranty... Rear Cover
M- Angle Complete Combination Stand without Motor Pictorial Page 8 8 0 0 0
M- Standard Complete Anchor Stand without Motor Pictorial Page Index 8 0
M- Angle Complete Anchor Stand without Motor Pictorial Page Index 8 0
M- Complete Combination Stand without Motor Pictorial Page 8 8 0
M- Angle Anchor and Standard Anchor Stands CB8 and Milwaukee Motors. Anchor Stand #0. 0 Rig Mast - ". 0 Mast Top with Pins. 000 Gear Rack - " 0 Ceiling Jack 0 Carriage Assembly 00 Anchor Base Assembly Angle Anchor Stand #00. 08 Rig Mast - ". 0 Mast Top with Pins. 000 Gear Rack - " 0 Ceiling Jack 0 Carriage Assembly 0 Anchor Angle Base Assembly 0 Angle Brace Assembly. 8
M- Angled and Standard Combination Stands CB8 and Milwaukee Motors.. Combination Stand #0 0 Rig Mast - ". 0 Mast Top with Pins. 000 Gear Rack - " 0 Ceiling Jack 0 Carriage Assembly 00 Combination Base Assembly.. Angle Combination Stand #0 08 Rig Mast - ". 0 Mast Top with Pins. 000 Gear Rack - " 0 Ceiling Jack 0 Carriage Assembly 09 Angle Comgination Base Assembly 0 Angle Brace Assembly 9
M- Angle Combination Base Assembly #09 9 Isometric View. 9. 8. 0. 0
M- Angle Combination Base Assembly #09 0 Combination Base 00 Vacuum Gasket 90008 Set Screw, Sq. Hd., /8- x " 000 Slot Cap Assembly. 0000 Slot Cap with Balls. 0000 Slot Cap Gasket. 000 Slot Cap Knob. 009 Knob Gasket 900080 Cap Screw, Hex Hd., /- x -/" 90008 Lock Washer, /" Split 9009 Jam Nut, /- 8 0 Vacuum Platform 9 90008 Cap Screw, Hex Hd., /- x " 0 900 Flat Washer, /" USS 90008 Cap Screw, Soc. Hd., #0- x /8" 9000 Flat Washer, #0 USS 0 Wheel Assembly 900098 Jam Nut, "-8 90009 Cap Screw, Hex Hd., -8 x -/"
M- Combination Base Assembly #00 9 Isometric View 9. 8 0...
M- Combination Base Assembly #00 09 M- Combination Base 00 Vacuum Gasket 90008 Set Screw, Sq. Hd., /8- x " 000 Slot Cap Assembly. 0000 Slot Cap with Balls. 0000 Slot Cap Gasket. 000 Slot Cap Knob. 009 Knob Gasket 900080 Cap Screw, Hex Hd., /- x -/" 90008 Lock Washer, /" Split 9009 Jam Nut, /- 8 0 Vacuum Platform 9 90008 Cap Screw, Hex Hd., /- x " 0 900 Flat Washer, /" USS 90008 Cap Screw, Soc. Hd., #0- x /8" 9000 Flat Washer, #0 USS 0 Wheel Assembly
M- Angle Anchor Base #0 Isometric View 9 8 0 Anchor Base 900080 Cap Screw, Hex Hd., /- x -/" 90008 Lock Washer, /" Split 9009 Jam Nut, /- 0 Wheel Assembly 9000 Set Screw, Sq. Hd., /- x " 90008 Cap Screw, Hex Hd., /- x " 8 90009 Cap Screw, Hex Hd., -8 x -/" 9 900098 Jam Nut, -8
M- Anchor Base Assembly #00 Isometirc View 08 Anchor Base 900080 Cap Screw, Hex Hd., /- x -/" 90008 Lock Washer, /" Split 9009 Jam Nut, /- 0 Wheel Assembly 9000 Set Screw, Sq. Hd., /- x " 90008 Cap Screw, Hex Hd., /- x "
M- Angle Brace Assembly for " Mast #0 Full View 0 Lower Brace 080 Angle Mast Bracket 90009 L-Bolt, /-8 0 Upper Brace 9000 Cap Screw, Soc. Hd., /-8 x "
Wheel Assembly #0 for Anchor Stand 0 Wheel Mount Bracket Assembly 0000 Wheel, " 9008 Flat Washer, /8" USS 00008 Set Collar, /8" with Set Screw
M- Carriage Assembly with Motor Mount CB00 and Weka Motors #08 Front View Back View 9 0 8 9 8 9 0 8
M- Carriage Assembly with Motor Mount CB00 and Weka Motors #08 08 M- Carriage 00 Non-adjusting Shim /8" x -/" x 9" 0 Non-adjusting Shim /8" x -/" x 9" 008 Adjusting Shim /8" x -/" x 9" 00 Adjusting Shim /8" x /8" x 8-/8" 90008 "L"-Bolt, /- 9000 Cap Screw, Flat Hd., /-0 x /8" Brass 8 9000 Cap Screw, Flat Hd., /-0 x " Brass 9 9000 Set Screw, Soc. Hd., /-0 x /8" 0 9000 Set Screw, Soc. Hd., /-0 x /" 90008 Cap Screw, Hex Hd., /-0 x /" 9000 Lock Washer, /" Split High Collar 90008 Fender Washer, /" x -/" 0 M- Pinion Gear 0 M- Handle /8" Diameter x 8" 0000 Handle Knob 80 Motor Mount Assembly 9
M- Carriage Assembly with Motor Mount CB8 and Milwaukee Motors #0 Front View Back View 9 0 8 9 8 9 0 0
M- Carriage Assembly with Motor Mount CB8 and Milwaukee Motors #0 08 M- Carriage 00 Non-adjusting Shim /8" x -/" x 9" 0 Non-adjusting Shim /8" x -/" x 9" 008 Adjusting Shim /8" x -/" x 9" 00 Adjusting Shim /8" x /8" x 8-/8" 90008 "L"-Bolt, /- 9000 Cap Screw, Flat Hd., /-0 x /8" Brass 8 9000 Cap Screw, Flat Hd., /-0 x " Brass 9 9000 Set Screw, Soc. Hd., /-0 x /8" 0 9000 Set Screw, Soc. Hd., /-0 x /" 90008 Cap Screw, Hex Hd., /-0 x /" 9000 Lock Washer, /" Split 90008 Fender Washer, /" x -/" 0 M- Pinion Gear 0 M- Handle /8" Diameter x 8" 0000 Handle Knob 0 Motor Mount Assembly
Motor Mount Assemblies CB00 and Weka Motors #80 CB00 use #90000 Weka use #90009 80 Motor Mount Plate 00 Key, /8" Sq. x " 90009 Cap Screw, Hex Hd., /8- x -/" 90000 Lock Washer, /8" Split 90000 Cap Screw, Hex Hd., /8- x " 900 Cap Screw, Soc. Hd., M8-. x mm 900 Parallel Key, 0mm x 8mm x 00mm CB8 and Milwaukee Motors #0 Inside Holes Outside Holes Inside Holes 00 Motor Mount Plate 00 Key, /8" Sq. x " 90009 Cap Screw, Hex Hd., /8- x -/" 90000 Lock Washer, /8" Split 900089 Cap Screw, Soc. Hd., /-8 x " 900088 Cap Screw, Soc. Hd., /-0 x "
Intentionally Blank
Vacuum Pump Assembly V #0 8 9 0 8
Vacuum Pump Assembly V #0 000 Vacuum Pump, Volt with Water Jar 0000 Pipe Tee, /" FPT 00 Gauge, Vacuum 0000 Close Nipple, / NPT 000 Petcock, /" NPT 008 Muffler 00 Water Jar Assembly 8 000 Water Jar Lid 9 000 Water Jar Gasket 0 000 Funnel Fitting 00 Float Ball 000 Water Trap Jar 000 O-Ring 9990 Hose Assembly 0009 Fitting, /" M. Pipe to /" Hose Barb 000 Clamp, Pinch On 990 Air Hose 8 0008 Fitting, /8" M. Pipe to /" Hose Barb
Dual Switch/Dual Outlet Control Panel V #000 9 8 9 9 0 0 8 9 8 Back View of Control Panel
Dual Switch/Dual Outlet Control Panel V #000 990 Control Box Body 990 Cover Plate 9009 Machine Screw, Rd. Hd., #0- x /8" 8000 Toggle Switch Amp/V 8000 Toggle Switch 0Amp/V 80000 Amp Meter V, 0- Amp 80008 Flanged Outlet, Amp, Volt 8 80089 Flanged Outlet, Amp, Volt 9 900 Machine Screw, Rd. Hd., #0- x -/" 0 90008 Lock Washer, #0 Split 90000 Hex Nut, #0-80000 Lock Nut, /" Sealing 8000 Connector, /" Cord 9900 Line Cord for Volt -" 8000 Plug, V, 0A, Twist Lock 9000 Cap Screw, Hex Hd., /-0 x -/" 9000 Nut, Toggle Switch, /"- 8 80008 AC Current Transformer 9 900090 Machine Screw, Rd. Hd., #- x /" 0 90009 Hex Nut, #- 90009 Lock Washer, # Split 800 ON/OFF Drill Motor Label 800 ON/OFF Vacuum Pump Label 9000 Lock Washer, /" Split
Dual Switch/Dual Outlet Control Panel V #9 for Weka Motor 9 8 9 9 0 0 8 9 8 Back View of Control Panel 8
Dual Switch/Dual Outlet Control Panel V #9 for Weka Motor 999 Control Box 990 Cover Plate 9009 Machine Screw, Rd. Hd., #0- x /8" 8000 Toggle Switch Amp/V 8000 Toggle Switch 0Amp/V 8008 Amp Meter V, 0-0 Amp 80008 Flanged Outlet, Amp, Volt 8 80009 Flanged Outlet, 0 Amp, Volt 9 900 Machine Screw, Rd. Hd., #0- x -/" 0 90008 Lock Washer, #0 Split 90000 Hex Nut, #0-80000 Lock Nut, /" Sealing 800 Connector, /" Cord 990 Line Cord for Volt - " 8000 Plug, V, 0A, Twist Lock 9000 Cap Screw, Hex Hd., /-0 x -/" 9000 Lock Washer, /" Split 8 80008 AC Current Transformer 9 900090 Machine Screw, Rd. Hd., #- x /" 0 90009 Hex Nut, #- 90009 Lock Washer, # Split 800 ON/OFF Drill Motor Label 800 ON/OFF Vacuum Pump Label 9000 Nut, Toggle Switch, /"- 9998 Control Box Bracket 9
M- Masts with Gear Rack 08 Mast - " 0 Mast - " 08 Mast - 8" 08 Mast - 0" 08 Mast - " 0
M- Angle Masts with Gear Rack 08 Angle Mast - " 08 Angle Mast - 8" 08 Angle Mast - 0"
EQUIPMENT AND PARTS WARRANTY Diamond Products warrants all equipment manufactured by it against defects in workmanship or materials for a period of one () year from the date of shipment to Customer. The responsibility of Diamond Products under this Warranty is limited to replacement or repair of defective parts at Diamond Products Elyria, Ohio factory, or at a point designated by it, of such parts as shall appear to us upon inspection at such parts, to have been defective in material or workmanship, with expense for transportation and labor borne by Customer. In no event shall Diamond Products be liable for consequential or incidental damages arising out of the failure of any Product to operate properly. Integral units such as engines, electric motors, batteries, transmissions, etc., are excluded from this Warranty and are subject to the prime manufacturer s warranty. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, AND ALL SUCH OTHER WARRANTIES ARE HEREBY DISCLAIMED. Prospect Street, Elyria, Ohio 0 (0) - (800) - Fax (0) -889 www.diamondproducts.com Printed in U.S.A. #800