ELA Project: Location: Cat.No: Type: Qty: Notes: 16" area luminaire Philips Stonco s ELA luminaires combine low profile style, advanced LED performance and advanced thermal management technology to deliver outdoor area lighting that is as energy efficient and aesthetically pleasing as it is remarkably economical. Versions are available with automatic profile dimming and motion response capability as well. Ordering guide example: ELA16-DIM-1-9LA-NW-UNIV-NP-F Prefix Controls Mounting Optics LED Wattage Color Temp Voltage Finish Options ELA16 ELA16 16" Area Luminaire Constant Wattage DIM -V Dimming APD 1 Auto Profile Dimming APD-MRO 2, Auto Profile Dimming and Motion Response Override pole mounted sensor APD-MRI 2 APD with Motion Response Override luminaire mounted sensor MRI 2 Motion Response at 5% low, luminaire mounted sensor MR5 2, Motion Response at 5% low, pole mounted sensor 1 Standard 2 2@18 2@9 2@9 @9 @1 @1 4 4@9 W Wall mount Recessed J-Box WS Wall mount including surface conduit MA Mast Arm Mount (requires 2 8" O.D. Mast Arm) 2 Type 2 Type 4 Type 4 5 Type 5 5 ma 5LA 55LA 7LA 9LA 4 5 ma 5LA 8LA 5LA-5 58 ma 14LA 4 7 ma 75LA 5LA-7 14LA CW Cool 5,7 K 7 CRI NW Neutral 4, K 7 CRI WW Warm, K 8 CRI 1 1V 8 8V 24 24V 277 277V 47 47V 48 UNIV 1-277V 5hz/6hz HVU 47-48V 5hz/6hz BRP Bronze Paint BLP Black Paint WP Paint NP Natural Paint OC Optional Color Specify optional color or RAL (ex: OC-LGP or OC-RAL724) SC Special color Specify, must supply color chip. Requires factory quote. F 5 Fusing in head LF 5 In-line/In-pole Fusing PC 5, 6 Receptacle with Photocell (Includes PCR5) PCB 5, 6 Photocell Button only PCR5 7, 9 Photocell Receptacle only with 2 dimming connections PCR7 8, 9 Photocell Receptacle only with 2 dimming and 2 auxiliary connections PTF2 Pole Top Fitter for 2 8"- 2 7 8" Tenon PTF Pole Top Fitter for "- 1 2" Tenon PTF4 Pole Top Fitter for 1 2"- 4" Tenon DL Diffusing Lens (reduces performance significantly) HS External Houseside Shield 1. Available with 1V277V (UNIV) input only. 2. Available with 1 or 277V only. Luminaires require one area motion sensor per pole (minimum) ordered separately. See Accessories on page 2. 4. 47V48V (HVU) is NOT available in 9LA or 14LA LED Wattages. 5. Provide specific input voltage. 6. Not available with 48V. 7. Works with -pin or 5-pin NEMA photocell/dimming device. 8. Works with -pin or 5-pin NEMA photocell/dimming device and auxiliary connections are not connected (for future use only). 9. If ordered with DIM, APD, MRI, MR5, APD-MRI, APD-MRO, dimming will not be connected to NEMA receptacle. ELA 2/15 page 1 of 5
27 12 6 8 25 6 12 27 6 ft 11 7 7 11 25 4 12 6 6 12 m ' 2.4m 8' 1.2m 4' m ft 1.2m 4' 2.4m 8 4 ft m ' m 2.4m 1.8m 1.2m.6m m.6m 1.2m 1.8m 2.4m m ' 8' 6' 4' 2' ft 2' 4' 6' 8' ' 5 15 18 15 12 9 6 6 9 12 15 18 ft (m) 2. (.8m) 8' (m) ' (m) ft (m) ' ELA Area Luminaire Area Luminaire Accessories (order separately) MS-A-1V 1V Input Area Motion Sensor For Pole Mounting with MR5 and APD-MRO luminaires MS-A-277V 277V Input Area Motion Sensor For Pole Mounting with MR5 and APD-MRO luminaires Note: Motion Sensors for pole mounting are ordered separately, with one (1) motion sensor required per pole location for MR5 and APD-MRO luminaires. See Luminare Configuration Information on pages 4 for more details. Area motion sensor color is Arctic only. Description LED Area luminaires combine a low profile style with advanced LED performance and thermal management technology to deliver outdoor area lighting that is as energy efficient and aesthetically pleasing as it is remarkably economical. ELA Luminaires are available as part of the Philips Solar Solution. See Solar Specification sheet for details. LED Wattage and Lumen Values (standard Area luminaire) Order Code (standard units) Array Quantity Total LEDs LED Current (ma) Average System Watts 1 LED Selection Initial Absolute Lumens 2 Type 2 Type Type 4 Type 5 5LA 1 2 5 6 NW,19 (s),47 (s),22 (s),182 (s) 55LA 1 48 5 54 NW 4,64 (s) 4,95 (s) 4,682 (s) 4,62 (s) 7LA 1 64 5 72 NW 6,19 (s) 6,429 6,81 (s) 6,4 9LA 1 8 5 88 NW 7,68 (s) 7,878 7,444 (s) 7,41 5LA 1 2 5 52 NW 4,4 (s) 4,715 (s) 4,445 (s) 4,86 (s) 8LA 1 48 5 78 NW 6,92 (s) 6,851 (s) 6,458 (s) 6,72 (s) 5LA-5 1 64 5 NW 8,2 (s) 8,897 8,87 (s) 8,275 14LA 1 8 58 142 NW 11, (s) 11,875 11,218 (s) 11,5 75LA 1 2 7 71 NW 5,5 (s) 5,879 5,557 (s) 5,42 5LA-7 1 48 7 4 NW 7,99 (s) 8,494 8,7 (s) 7,874 14LA 1 64 7 17 NW,77 11,61,484,294 1. Wattage may vary by +/- 8% due to LED manufacturer forward volt specification and ambient temperature. Wattage shown is average for 1V through 277V input. Actual watttage may vary by an additional +/- % due to actual input voltage. Actual test system wattage is shown in individual IES files on www.sitelighting.com 2. Lumen values based on photometric tests performed in compliance with IESNA LM-79. (s). Data is scaled based on tests of similar, but not identical, luminaires. Dimensions Standard Area luminaire C D Integral Motion Sensor MRI and APD-MRI Configurations Only. Lens Dimensions Operating temperature: -4-11 F (-4-55 C) Storage temperature: -4-176 F (-4-8 C) Operating Humidity: -9% FS-L2W 2.75.875 FS-LW 2.75.875 Five year warranty UL and cul listed.65.965 1.295.61 FIXTURE SENSORS & CONTROLS E A End View F B C G Sizes ELA16" A 4.5" 11.4 cm B 6.28" 15.95 cm C 16.5" 41.99 cm Coverage Patterns FS-L2W Effective Projected Area (ft 2 /m 2 ) Model Single Twin /4 Approximate Weight (Single Luminaire) ELA16" 1.8 /. 1.52 /.141 2.67 /.248 21 lbs / 9.5 kg FS-LW Bird Deterrent Wires () (Always Included) D 2" 5.8 cm E 15.2" 8.61 cm F 4.6" 11.68 cm ELA 2/15 page 2 of 5 Ordering Information Catalog No. Color Description G 1.5".89 cm 6 lens, maximum coverage 6 diameter from 4 height 6 lens, maximum coverage diameter from 8 height Pub. No. 561 rev /9 www.wattstopper.com 8.8 7 9.8 5 8 5
Mountings Wall Mounting Plate may be mounted over (not to) a recessed j-box (by others) and in all cases must be properly supported to structure as indicated. Surface conduit mount requires conduit entry from below. See installation instruction sheets for details. Note: Wall mounting bracket is secured to wall with /8" (.9525 cm) studs or bolts (by others.) Structural members must be present in wall to accept bolts. Mast Arm Mount Wall Mount 7.8" 19.812 cm Wall Bracket Height 7.25" / 18.415 cm Width from Wall 2.59" / 6.579 cm 2.75" 6.985 cm.75" / 9.525 cm 1.75" (4.445 cm) Diameter Holes for /8" (.9525 cm) Studs or Bolts (by others) Luminaire Configuration Information ELA16 Philips Gardco EcoForm LED standard luminaire providing constant wattage and constant light output when power to the luminaire is energized. ELA16-DIM Philips Gardco EcoForm LED luminaire provided with -V dimming for connection to a control system provided by others. ELA16-APD LED Area luminaires with Automatic Profile Dimming. are provided with the Philips DynaDimmer module included. The DynaDimmer module is programmed to go to 5% power, 5% light output two (2) hours prior to night time mid-point and remain at 5% for six (6) hours after night time midpoint. Mid-point is continuously recalculated by the DynaDimmer module based on the average mid-point of the last two full night cycles. Short duration cycles, and power interruptions are ignored and do not affect the determination of mid-point. APD is available in 1V277V input only. ELA16-APD Dimming Profile: % ELA 2/15 page of 5 2 hours 6 hours 5% 5% % Power On Mid Point Power Off ELA16-MR5 Pole Mounted Motion Sensor - MR5: LED Area luminaires with motion response provide a 5% power reduction on low and a commensurate reduction in light output. The power and light output reduction is accomplished utilizing the Philips DynaDimmer module, programmed for a constant 5% power. Power supplied by the motion sensor connected to the override line on the DynaDimmer takes the luminaire to high setting, % power and light output, when motion is detected. The luminaire remains on high until no motion is detected for the motion sensor duration period, after which the luminaire returns to low. Duration period is factory set at 15 minutes, and is field adjustable from 5 minutes up to 15 minutes. This configuration is not available for use with wall mounted luminaires. MR5 is available in 1V277V input only to the luminaire. The motion sensor requires either 1V or 277V input to the motion sensor. The Area PIR motion sensor is the WattStopper EW--1-W (1V Input - MS-A-1V) or the WattStopper EW--277-W (277V Input - MS-A-277V.) One motion sensor per pole is required and is ordered separately. Black, 1V or 277V Input, Neutral Sensor Red Connects to Override Input (Orange) Line of DynaDimmer The area motion detector provides coverage equal to up to 6 times the sensor height above ground, 27 from the front-center of the sensor. Area PIR Motion Sensor Coverage Pattern: 9 9 8ft 8ft 8ft 8ft 9.5ft 25ft 52.5ft (m) 1H9.5ft (8m) H25ft 6H (16m) 52.5ft (m) (8m) (16m) Motion 9.5ft response 25ft 52.5ft requires that the pole include (m) 9.5ft (8m) 25ft (16m) 52.5ft an additional (m) (8m) hand hole (16m) 15 feet above the pole base, normally oriented 18 to the standard hand hole. For Philips Stonco poles, order the pole with the Motion Sensor Mounting (MSM) option which includes the hand hole and a special hand hole cover plate for the sensor with a 1/2" NPT receptacle centered on the hand hole cover plate into which the motion sensor mounts. Once the motion sensor is connected to the hand hole cover plate, then wiring connections are completed in the pole. The plate (complete with motion sensor attached and wired) is then mounted to the hand hole. If poles are supplied by others, the customer is responsible for providing suitable mounting accommodations for the motion sensor in the pole. Mounting to a Philips Stonco Pole: Wiring in Pole 27 Front Coverage Distances are approximate. H = height above ground Height Additional Hand Hole 1 Above Pole Base (oriented 18 to the standard hand hole) Cover Plate with 1/2" NPT Coupling (supplied with pole) Motion Sensor Attach Motion Sensor to Cover Plate coupling, Complete Wiring in Pole and Attach Cover Plate to Hand Hole
ELA16-APD-MRO Pole Mounted Motion Sensor - APD- MRO: Luminaires with Automatic Profile Dimming and Motion Response Override combine the benefits of both automatic profile dimming and motion response. The luminaire will dim to 5% power, 5% light output, per the dimming profile shown for APD luminaires (see page ). If motion is detected during the time that the luminaire is operating at 5%, the luminaire returns to % power and light output. The luminaire remains on high until no motion is detected for the duration period, after which the luminaire returns to low. Duration period is factory set at 15 minutes, and is field adjustable from 5 minutes up to 15 minutes. The approximate motion sensor coverage pattern is as shown below. Side Coverage Pattern 2H Top Coverage Pattern 1H Distances are approximate. H = height above ground Notes: APD-MRO is available in 1V through 277V input only to luminaire. The motion sensor requires either 1V or 277V input to the motion sensor. APD-MRO has the same pole requirements, utilizes the same motion sensors as the MR-5 version, and wires identically as well. ELA16-MRI Luminaires with Motion Response and an integral motion sensor include the DynaDimmer module and an integral motion sensor. The location of the integral motion sensor is shown on page 2. Power supplied by the motion sensor connected to the override line on the DynaDimmer takes the luminaire to high setting, % power and light output, when motion is detected. The luminaire remains on high until no motion is detected for the motion sensor duration period, after which the luminaire returns to low. Duration period is factory set at 15 minutes. Available with 1 or 277V only. LED Area MRI luminaires are provided with the WattStopper FS-55-LW motion sensor, with a maximum recommended ft. mounting height. The area coverage and range of the integral sensors make them most suitable for applications 2H ELA16-APD- MRI Luminaires with Automatic Profile Dimming and Motion Response Override combine the benefits of both automatic profile dimming and motion response. The luminaire will dim to 5% power, 5% light output, per the dimming profile shown for APD luminaires (see page ). If motion is detected during the time that the luminaire is operating at 5%, the luminaire returns to % power and light output. The luminaire remains on high until no motion is detected for the duration period, after which the luminaire returns to low. Duration period is factory set at 15 minutes. APD-MRI luminaires are available with 1V through 277V (UNIV) input voltages only. APD-MRI luminaires use the identical motion sensor as MRI lumaires. See motion sensor details above. not requiring longe range detection. For longer range detection applications, configurations with pole mounted motion sensors are recommended. ELA 2/15 page 4 of 5
Housing The housing is one-piece, die cast aluminum and mounts to a pole, utilizing an extruded arm. Additionally, LED Area luminaires mount easily to a wall or to a mast arm while providing smooth visual transitions. Electrical Luminaires are equipped with an LED driver that accepts 1V through 277V or 47V through 48V, 5hz to 6hz, input. 47V through 48V input is available on the 1LA or 2LA LED wattages only. Driver output is based on the LED wattage selected. Component-to-component wiring within the luminaire will carry no more than 8% of rated current and is listed by UL for use at 6 VAC at 2 F / 15 C or higher. Plug disconnects are listed by UL for use at 6 VAC, 15A or higher. LED board, LED driver and LED array are RoHS compliant. Power factor is not less than 9%. The luminare consumes. watts in the off state. All motion sensors provided consume. watts in the off state. LED Performance Predicted Lumen Depreciation Data 1 Ambient Temperature C 25 C 4 C Driver (ma) L7 Per Hour 2 5 175, 5 1, 58 1, 7 95, 5 175, 5 1, 58 5, 7 85, 1. Predicted performance derived from LED manufacturer s data and engineering design estimates, based on IESNA LM-8 methodology. Actual experience may vary due to field application conditions. 2. L7 is the predicted time when LED performance depreciates to 7% of initial lumen output. LED Thermal Management The LED Area luminaire design provides die cast aluminum integral thermal radiation fins to provide the excellent thermal management so critical to long LED system life. Optical Systems Lensed LED arrays are set to achieve IES Type II, Type III, Type IV and Type V distributions. Individual LED arrays are replaceable. Luminaires include a clear glass lens standard. A Diffuse Lens is available as an option (DL). Shielding Special house side shield is required to meet FWC Certification. Shields will be factory installed. Full Cutoff Performance Full cutoff performance means a luminaire distribution where zero candela intensity occurs at an angle at or above 9 above nadir. Additionally, the candela per lamp lumens does not numerically exceed (%) at a vertical angle of 8 above nadir. This applies to all lateral angles around the luminaire. Listings All luminaires bear UL or CUL (where applicable) Wet Location labels. Finish Each standard color luminaire receives a fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) textured polyester powdercoat finish. Standard colors include bronze (BRP), black (BLP), white (WP), and natural aluminum (NP). Consult factory for specs on optional or custom colors. Warranty ELA Luminaires feature a 1 year limited warranty. LED luminaires with LED arrays feature a 5 year limited warranty covering the LED arrays and LED drivers. 14 Koninklijke Philips N.V. All rights reserved. Philips reserves the right to make changes in specifications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication. philips.com/luminaires ELA 2/15 page 5 of 5 Philips Lighting, North America Corporation Franklin Square Drive, Somerset, NJ 887 Tel. 855-486-2216 Imported by: Philips Lighting, A division of Philips Electronics Ltd. 281 Hillmount Rd, Markham, ON, Canada L6C 2S Tel. 8-668-98