AO 3V Complementary MOSFET General Description The AO uses advanced trench technology to provide excellent R DS(ON) and low gate charge. The complementary MOSFETs form a highspeed power inverter, suitable for a multitude of applications. Product Summary NChannel PChannel V DS = 3V 3V I D = 3.5A (V GS =V).7A (V GS =V) R DS(ON) R DS(ON) < 5mΩ (V GS =V) < mω (VGS=V) < 7mΩ (V GS =.5V) < 7mΩ (VGS=.5V) Top View TSOP Bottom View Top View D D Pin G S G 3 5 D S D G S nchannel G S pchannel Absolute Maximum Ratings T A =5 C unless otherwise noted Parameter Symbol Max nchannel Max pchannel Units DrainSource Voltage 3 3 V GateSource Voltage Continuous Drain T A =5 C Current T A =7 C Pulsed Drain Current C Power Dissipation B T A =5 C T A =7 C Junction and Storage Temperature Range V DS V GS I D I DM P D T J, T STG ± 3.5 3.5.73 55 to 5 ±.7. 5.5.73 V A W C Thermal Characteristics Parameter Symbol Typ Max Maximum JunctiontoAmbient A t s 78 Maximum JunctiontoAmbient A D R θja SteadyState 5 Maximum JunctiontoLead SteadyState 8 R θjl Units C/W C/W C/W Rev5: Mar www.aosmd.com Page of 9
AO NChannel Electrical Characteristics (T J =5 C unless otherwise noted) Symbol Parameter Conditions Min Typ Max Units STATIC PARAMETERS BV DSS DrainSource Breakdown Voltage I D =5µA, V GS =V 3 V I DSS V DS =3V, V GS =V T J =55 C 5 I GSS GateBody leakage current V DS =V, V GS = ±V ± na V GS(th) Gate Threshold Voltage V DS =V GS I D =5µA.5.5 V I D(ON) On state drain current V GS =V, V DS =5V A R DS(ON) Zero Gate Voltage Drain Current Static DrainSource OnResistance V GS =V, I D =3.5A V GS =.5V, I D =A 5 T J =5 C 77 5 7 mω g FS Forward Transconductance V DS =5V, I D =3.5A S V SD Diode Forward Voltage I S =A,V GS =V.79 V I S Maximum BodyDiode Continuous Current.5 A DYNAMIC PARAMETERS C iss Input Capacitance 7 pf C oss Output Capacitance V GS =V, V DS =5V, f=mhz 35 pf C rss Reverse Transfer Capacitance 3 pf R g Gate resistance V GS =V, V DS =V, f=mhz.7 3.5 5.3 Ω SWITCHING PARAMETERS Q g (V) Total Gate Charge.5 5 nc Q g (.5V) Total Gate Charge 3 nc V GS =V, V DS =5V, I D =3.5A Q gs Gate Source Charge.55 nc Q gd Gate Drain Charge nc t D(on) TurnOn DelayTime.5 ns t r TurnOn Rise Time V GS =V, V DS =5V, R L =.Ω,.5 ns t D(off) TurnOff DelayTime R GEN =3Ω 8.5 ns t f TurnOff Fall Time 5.5 ns t rr Body Diode Reverse Recovery Time I F =3.5A, di/dt=a/µs 7.5 ns Q rr Body Diode Reverse Recovery Charge I F =3.5A, di/dt=a/µs.5 nc A. The value of R θja is measured with the device mounted on in FR board with oz. Copper, in a still air environment with T A =5 C. The value in any given application depends on the user's specific board design. B. The power dissipation P D is based on T J(MAX) =5 C, using s junctiontoambient thermal resistance. C. Repetitive rating, pulse width limited by junction temperature T J(MAX) =5 C. Ratings are based on low frequency and duty cycles to keep initialt J =5 C. D. The R θja is the sum of the thermal impedence from junction to lead R θjl and lead to ambient. E. The static characteristics in Figures to are obtained using <3µs pulses, duty cycle.5% max. F. These curves are based on the junctiontoambient thermal impedence which is measured with the device mounted on in FR board with oz. Copper, assuming a maximum junction temperature of T J(MAX) =5 C. The SOA curve provides a single pulse ratin g. µa mω THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN, FUNCTIONS AND RELIABILITY WITHOUT NOTICE. Rev 5: Mar www.aosmd.com Page of 9
AO NChannel: TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 5 V 7V.5V V 8 V DS =5V I D (A) 9 3.5V I D (A) 5 C 3 V GS =3V 5 C 3 5 V DS (Volts) Fig : OnRegion Characteristics (Note E).5.5.5 3 3.5.5 V GS (Volts) Figure : Transfer Characteristics (Note E) 7.8 R DS(ON) (mω) 5 V GS =.5V V GS =V Normalized OnResistance... V GS =V I D =3.5A V GS =.5V I D =A 7 5 3 8 I D (A) Figure 3: OnResistance vs. Drain Current and Gate Voltage (Note E).8 5 5 75 5 5 75 Temperature ( C) Figure : OnResistance vs. Junction Temperature 8 (Note E) R DS(ON) (mω) 8 5 C 5 C I D =3.5A.E.E.E I S (A).E.E.E3.E 5 C 5 C 8 V GS (Volts) Figure 5: OnResistance vs. GateSource Voltage (Note E).E5.....8.. V SD (Volts) Figure : BodyDiode Characteristics (Note E) Rev 5: Mar www.aosmd.com Page 3 of 9
AO NChannel: TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 8 V DS =5V I D =3.5A 3 5 V GS (Volts) Capacitance (pf) 5 C iss 5 C oss.. I D (Amps)... 3 5 Q g (nc) Figure 7: GateCharge Characteristics R DS(ON) limited T J(Max) =5 C T A =5 C DC.. V DS (Volts) Figure 9: Maximum Forward Biased Safe Operating Area (Note F) µs µs ms ms s Power (W) C rss 5 5 5 3 V DS (Volts) Figure 8: Capacitance Characteristics T A =5 C... Pulse Width (s) Figure : Single Pulse Power Rating JunctiontoAmbient (Note F) Z θja Normalized Transient Thermal Resistance.. D=T on /T T J,PK =T A P DM.Z θja.r θja R θja =5 C/W Single Pulse In descending order D=.5,.3,.,.5,.,., single pulse P D...... Pulse Width (s) Figure : Normalized Maximum Transient Thermal Impedance (Note F) T on T Rev 5: Mar www.aosmd.com Page of 9
AO Gate Charge Test Circuit & Waveform Qg V Qgs Qgd Ig RL Resistive Switching Test Circuit & Waveforms Charge Rg 9% % td(on) t r t d(off) t f t on t off Unclamped Inductive Switching (UIS) Test Circuit & Waveforms L E = / LI AR AR BV DSS Rg Id Id I AR Diode Recovery Test Circuit & Waveforms Q = Idt rr Ig Isd L Isd I F di/dt I RM t rr Rev 5: Mar www.aosmd.com Page 5 of 9
AO PChannel Electrical Characteristics (T J =5 C unless otherwise noted) Symbol Parameter Conditions Min Typ Max Units STATIC PARAMETERS BV DSS DrainSource Breakdown Voltage I D =5µA, V GS =V 3 V I DSS Zero Gate Voltage Drain Current V DS =3V, V GS =V T J =55 C 5 µa I GSS GateBody leakage current V DS =V, V GS = ±V ± na V GS(th) Gate Threshold Voltage V DS =V GS I D =5µA..9. V I D(ON) On state drain current V GS =V, V DS =5V 5 A V GS =V, I D =.7A 8 R DS(ON) Static DrainSource OnResistance T J =5 C 5 mω V GS =.5V, I D =A 3 7 mω g FS Forward Transconductance V DS =5V, I D =.7A 5.5 S V SD Diode Forward Voltage I S =A,V GS =V.8 V I S Maximum BodyDiode Continuous Current.5 A DYNAMIC PARAMETERS C iss Input Capacitance 97 pf C oss Output Capacitance V GS =V, V DS =5V, f=mhz pf C rss Reverse Transfer Capacitance 37 pf R g Gate resistance V GS =V, V DS =V, f=mhz 3.5 7.. Ω SWITCHING PARAMETERS Q g (V) Total Gate Charge.3 5. nc Q g (.5V) Total Gate Charge. 3 nc V GS =V, V DS =5V, I D =.7A Q gs Gate Source Charge.7 nc Q gd Gate Drain Charge. nc t D(on) TurnOn DelayTime 7.5 ns t r TurnOn Rise Time V GS =V, V DS =5V, R L =5.55Ω,. ns t D(off) TurnOff DelayTime R GEN =3Ω.8 ns t f TurnOff Fall Time 3.8 ns t rr Body Diode Reverse Recovery Time I F =.7A, di/dt=a/µs.3 ns Q rr Body Diode Reverse Recovery Charge I F =.7A, di/dt=a/µs. nc A. The value of R θja is measured with the device mounted on in FR board with oz. Copper, in a still air environment with T A =5 C. The value in any given application depends on the user's specific board design. B. The power dissipation P D is based on T J(MAX) =5 C, using s junctiontoambient thermal resistance. C. Repetitive rating, pulse width limited by junction temperature T J(MAX) =5 C. Ratings are based on low frequency and duty cycles to keep initialt J =5 C. D. The R θja is the sum of the thermal impedence from junction to lead R θjl and lead to ambient. E. The static characteristics in Figures to are obtained using <3µs pulses, duty cycle.5% max. F. These curves are based on the junctiontoambient thermal impedence which is measured with the device mounted on in FR board with oz. Copper, assuming a maximum junction temperature of T J(MAX) =5 C. The SOA curve provides a single pulse ratin g. THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN, FUNCTIONS AND RELIABILITY WITHOUT NOTICE. Rev 5: Mar www.aosmd.com Page of 9
AO PChannel: TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 5 V 8V V 5V.5V 8 V DS =5V I D (A) 9 V I D (A) 5 C 3 V GS =3.5V 5 C 3 5 V DS (Volts) Fig : OnRegion Characteristics (Note E).5.5.5 3 3.5.5 5 5.5 V GS (Volts) Figure : Transfer Characteristics (Note E). R DS(ON) (mω) 8 8 V GS =.5V V GS =V Normalized OnResistance.. V GS =V I D =.7A 7 5 V GS =.5V I D =A 8 I D (A) Figure 3: OnResistance vs. Drain Current and Gate Voltage (Note E).8 5 5 75 5 5 75 Temperature ( C) Figure : OnResistance vs. Junction Temperature 8 (Note E) R DS(ON) (mω) 3 8 5 C 5 C I D =.7A I S (A).E.E.E.E.E.E3 5 C 5 C.E 8 V GS (Volts) Figure 5: OnResistance vs. GateSource Voltage (Note E).E5.....8.. V SD (Volts) Figure : BodyDiode Characteristics (Note E) Rev 5: Mar www.aosmd.com Page 7 of 9
AO PChannel: TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 8 V DS =5V I D =.7A 3 5 C iss V GS (Volts) Capacitance (pf) 5 C oss 5 Q g (nc) 3 5 Figure 7: GateCharge Characteristics C rss 5 5 5 3 V DS (Volts) Figure 8: Capacitance Characteristics. T A =5 C I D (Amps)... R DS(ON) limited T J(Max) =5 C T A =5 C DC µs µs ms ms s Power (W)... V DS (Volts) Figure 9: Maximum Forward Biased Safe Operating Area (Note F)... Pulse Width (s) Figure : Single Pulse Power Rating JunctiontoAmbient (Note F) Z θja Normalized Transient Thermal Resistance.. D=T on /T T J,PK =T A P DM.Z θja.r θja R θja =5 C/W Single Pulse In descending order D=.5,.3,.,.5,.,., single pulse P D...... Pulse Width (s) Figure : Normalized Maximum Transient Thermal Impedance (Note F) T on T Rev 5: Mar www.aosmd.com Page 8 of 9
AO Gate Charge Test Circuit & Waveform Qg V Qgs Qgd Ig Charge RL Resistive Switching Test Circuit & Waveforms t t on off td(on) tr td(off) t f Rg 9% % Id L Unclamped Inductive Switching (UIS) Test Circuit & Waveforms E = / LI AR AR Rg Id BV DSS I AR Diode Recovery Test Circuit & Waveforms Q = Idt rr Ig Isd L Isd I F di/dt I RM t rr Rev 5: Mar www.aosmd.com Page 9 of 9