FRAMELESS PRODUCT SPECIFICATIONS GUIDE
LANZ CABINET ENVIRONMENTAL STATEMENT Lanz Cabinets believes that we are only guests on this earth and has practiced being an environmentally friendly company long before it was vogue. We are committed to continuous improvement and conducting business in a fashion that safeguards the earth, our employees, customers and neighbors from environmental hazards. We dedicate efforts to make environmentally friendly the norm rather than the exception we include Environmental Management in our Quality Manual and it is reflected in our Core Values, We will be sensitive to the environment by promoting the use of renewable resources, recyclable products and sustainable practices." Our management, engineering and purchasing teams are constantly researching leading edge technologies for ways to conserve energy and reduce the impact of our hazardous and nonhazardous waste streams. Where we do have waste, we look for ways to recycle, and if the waste needs to be disposed of, we choose the way that has the least impact on our earth. We are active members of the Kitchen Cabinet Manufacturers Association (KCMA), and certified adherents to their Environmental Stewardship Program (ESP). KCMA ESP certification requires a company to be certified annually and show compliance in the following areas: air quality, product resource management, process resource management, environmental stewardship, and community relations.
FRAMELESS PRODUCT SPECIFICATIONS GUIDE A C B D E G F A Full height pantry applied finished end B Deep refrigerator cabinet C Deep refrigerator panel D Matching integrated finished ends E Easy reach or lazy susan cabinet F Finished toe kick G Base applied finished end
FRAMELESS PRODUCT SPECIFICATIONS GUIDE TABLE OF CONTENTS Frameless Base Cabinets... 5 Overview...5 Dimensions & Toe-kick...6 Configurations....7 Details...13 Frameless Wall Cabinets...15 Overview...15 Dimensions...16 Configurations....17 Details...20 Frameless Tall Cabinets....23 Overview...23 Dimensions & Toe-kick...24 Configurations....25 Frameless Vanity Cabinets...27 Overview...27 Dimensions & Toe-kick...28 Configurations....29 Frameless ADA Compliant Cabinets...33 Overview & Dimensions...33 RDT Configurations...34 Standard Frameless Operational Hardware...37 Common Frameless Optional Accessories...39 Standard Frameless Cabinet Specifications...40 Frameless Door & Applied End Material Matrix...41 Cabinet Care Information....42 Warranty Policy...43
FRAMELESS BASE CABINETS A B F I H K J C L G D E M A 3/4" Doweled top stretchers front and back B Metal box drawer construction (double wall soft close full extension option available) C 5/8" Full depth adjustable shelf D All doors full overlay design E 5/8" Toe kick material provided at front of leg levelers F Doweled engineered panel and rail joinery G 5/8" Bottom panel H 1/4" Captured backs in bases (except sinks) I 5/8" Drawer bottoms and backs J 3/4" Field applied finished end panel (match to door panel) K 1mm PVC solid color case tape coordinated with finished case selection L Reference door style subsection detail for typical materials provided at back of door M Reference door style subsection detail for typical materials provided at back of applied finished ends PRODUCT SPECIFICATIONS GUIDE Frameless Base Cabinets Overview 5
BASE CABINET DIMENSIONS 24 13/16 " 24" 34 1/2 " APPLIED FINISH END UNFINISHED END VARIES IN WIDTH TOP VIEW 24" W MAX FRONT VIEW TOE KICK DETAIL 34 1/2 " 4 1/2 " 3 1/8 " 24" W CASE 24 13/16 " W TO DOOR FACE Finished toe kick material to compliment doors and finished ends 6 PRODUCT SPECIFICATIONS GUIDE Frameless Base Cabinets Dimensions & Toe-kick
BASE SINGLE FULL HEIGHT BASE PAIR FULL HEIGHT 9" W UP TO 24" W MAX 24" W UP TO 36" W MAX BASE SINGLE DRAWER BASE STANDARD DRAWER 9" W UP TO 24" W MAX 24" W UP TO 30" W MAX PRODUCT SPECIFICATIONS GUIDE Frameless Base Cabinets Configurations 7
BASE STANDARD (2) DRAWER BASE (2) DRAWER COOK TOP FALSE FRONT 30" W UP TO 36" W MAX 30" W UP TO 36" W MAX BASE (4) DRAWER STACK BASE (3) DRAWER STACK EQUAL HEIGHT (EQ) EQ EQ EQ EQ 9" W UP TO 24" W MAX 9" W UP TO 24" W MAX 8 PRODUCT SPECIFICATIONS GUIDE Frameless Base Cabinets Configurations
BLIND BASE WITH BREADBOARD BREADBOARD IS CONCEALED BEHIND DRAWER FRONT BREADBOARD SITS IN METAL U-CHANNEL GUIDE 30" W UP TO 36" W MAX 24 13/16 " 24 13/16 " TO DOOR FACE SECTION VIEW BASE SINGLE DRAWER BREADBOARD BASE 3 DRAWER BREADBOARD EQ EQ 9" W UP TO 24" W MAX 9" W UP TO 24" W MAX PRODUCT SPECIFICATIONS GUIDE Frameless Base Cabinets Configurations 9
BASE POTS AND PANS EQ EQ 30" W UP TO 36" W MAX SINK BASE FULL HEIGHT SINK BASE FALSE FRONT FALSE FRONT 24" W UP TO 36" W MAX 24" W UP TO 36" W MAX 10 PRODUCT SPECIFICATIONS GUIDE Frameless Base Cabinets Configurations
BASE BLIND SINGLE DOOR 30" W UP TO 36" W MAX BASE BLIND DOOR AND DRAWER 30" W UP TO 36" W MAX PRODUCT SPECIFICATIONS GUIDE Frameless Base Cabinets Blind Configurations 11
BASE CORNER SINK FULL TOP 59 1/8 " 21 7/8 " 28 1/4 " 24" 42" 32" 21 7/8 " 24 3/4 " 24" 24" 24" 24 3/4 " WIDE 42" PLAN VIEW BASE CORNER EZ REACH BASE CORNER W/LAZY SUSAN 32" 32" 32" 32" 20" 20" 12 PRODUCT SPECIFICATIONS GUIDE Frameless Base Cabinets Corner Configurations
BLIND BASE CABINETS 60" 60" 24" 12" 12" 12" 12" 24" RIGHT BLIND BASE 24" 24" LEFT BLIND BASE 3 3/4 " 3 3/4 " FILLER ADJACENT CABINET 21" 21" ADJACENT CABINET FILLER BASE EZ AND LAZY SUSAN CLEARANCE 36" 32" 4" VOID TYPICAL ADJOINING BASE CABINET 36" 32" 4" VOID 24" PRODUCT SPECIFICATIONS GUIDE Frameless Base Cabinets Details 13
VOID CORNER FILLERS 22" 3 5/8 " 23 1/4 " 1 VOID CORNER 24" 2 3" Void corner fillers 3 3/4 " stock Trim to one side to 3" wide reveal RANGE FILLER PLAN VIEW 3/4" 3/4" 18" 31 1/2 " 18" 61 1/2 " 96" 34 1/2 " 3/4" X 4" FINISHED SPACERS TO MATCH DOOR FINISH INSTALLED FLUSH TO FACE OF CASE 14 3/4" 3/4" 18" 31 1/2 " 18" PRODUCT SPECIFICATIONS GUIDE Frameless Base Cabinets Details
FRAMELESS WALL CABINETS A B G C F H E D I K J L A 5/8" Top panel B 1/4" Captured back C Self locking shelf pins D 6-Way adjustable clip on 110 degree hinge opening (soft close option) E 5/8" Bottom panel F 5/8" Side panels G 5/8" Full-depth adjustable shelves H 3/4" Field applied finished end panel (match to door finish) I 1mm PVC solid color case tape coordinated with finished case selection J White laminate typical at exposed bottom of wall cabinets K Reference door style subsection detail for typical materials provided at back of door L Reference door style subsection detail for typical materials provided at back of applied finish ends PRODUCT SPECIFICATIONS GUIDE Frameless Wall Cabinets Overview 15
TYPICAL WALL CABINET SECTION VIEW 12 13/16 " TO FACE OF DOOR 11" INSIDE CLEAR DEPTH 4 1/2 " CONCEALED NAILER 24" 36" 30" 4 1/2 " CONCEALED NAILER 18" 12" CASE DEPTH WALL UNDERCABINET LIGHTING DETAILS SECTION VIEW DETAIL DETAIL 36" CLEATING ATTACHED TO BOTTOM FROM UNDERSIDE WITH BRAD NAILS 12" 12" 1 3/4 " VALANCE ATTACHED TO UNDERSIDE IN FIELD" WITH CLEATING DOORS EXTEND 1 3/4 " WITH 1 3/4 " VALANCE ATTACHED TO UNDERSIDE IN FIELD" WITH CLEATING 16 PRODUCT SPECIFICATIONS GUIDE Frameless Wall Cabinets Dimensions
REFRIGERATOR UPPER (12" TO 18"H) DEEP REFRIGERATOR UPPER (12" TO 18"H) 12 13/16 " D W/ APPLIED FINISHED ENDS UP TO 36" W MAX 18" TO 24" D UP TO 36" W MAX UPPER SINGLE (24"H) UPPER SINGLE (30"H) 9" W UP TO 24" W MAX 9" W UP TO 24" W MAX PRODUCT SPECIFICATIONS GUIDE Frameless Wall Cabinets Configurations 17
STANDARD PAIRED UPPER (30"H) 45 DEGREE CORNER UPPER (30"H) UP TO 36" W MAX 24" X 24" W BLIND SINGLE UPPER (30"H) BLIND PAIRED UPPER (30"H) UP TO 36" W MAX UP TO 36" W MAX 18 PRODUCT SPECIFICATIONS GUIDE Frameless Wall Cabinets Configurations
HORIZONTAL OPEN CASE VERTICAL OPEN CASE 12" DEEP 12" DEEP OPEN FIXED SHELF OPEN OPEN FINISHED CASE TAPE 1/4" FINISHED BACK CASE TO COMPLIMENT OPEN DESIGN FINISHED CASE TAPE 1/4" FINISHED BACK CASE TO COMPLIMENT OPEN DESIGN GLASS WALL CABINET 12 13/16 " DEEP WITH DOOR Coordinated finished interior for glass door 1 mm PVC solid color case tape coordinated with finish case selection PRODUCT SPECIFICATIONS GUIDE Frameless Wall Cabinets Open Cabinets 19
WALL CABINET WITH LIFT DOOR PLAN VIEW *MAXIMUM WIDTH OF LIFT DOOR UPPERS = 36" LIFT SYSTEM HARDWARE DUCTED RANGE UPPER 14 1/2 " 12 3/4 " 12" 8 3/4 " 10 1/4 " 30" DUCTED BOTTOM DETAIL OPTIONAL INTERIOR HOOD VENT COVER 20 PRODUCT SPECIFICATIONS GUIDE Frameless Wall Cabinets Details
WALL CABINET FILLERS RIGHT BLIND WALL CABINET FILLER DOUBLE FILLER AT CORNERS Fillers are 5/8" 3/4" thick Provided as trim to fit at installation Back Fillers are 5/8" 3/4" thick Face fillers provided to match doors Both provided as trim to fit at installation CORNER CABINET DETAILS TOP VIEW 45 DEGREE WALL CORNER CABINET DETAIL CONNECTIONS 24" 24" 2 12" 24" 24" 16 3/16 " 1 12" PRODUCT SPECIFICATIONS GUIDE Frameless Wall Cabinets Details 21
22
FRAMELESS TALL CABINETS EQUAL HEIGHT DOORS A OFFSET HEIGHT DOORS A B B I C I D G D G C F H F H E E J J A 5/8" Top panel B 1/4" Captured back C Self locking shelf pins D 6-Way adjustable clip on 110 degree hinge opening (soft close option) E 5/8" Bottom panel F 5/8" Full-depth adjustable shelves G 3/4" Field applied finished end panel (match to door finish) H 1mm PVC solid color case tape coordinated with finished case selection I Reference door style subsection detail for typical materials provided at back of door J Reference door style subsection detail for typical materials provided at back of applied finished ends PRODUCT SPECIFICATIONS GUIDE Frameless Tall Cabinets Overview 23
TALL CABINET EQUAL HEIGHT DOORS APPLIED FINISH END 24 13/16 " 24" CASE DEPTH 84" 95" PLAN VIEW VARIES IN WIDTH UP TO 24" 4 1/2 " 3 1/8 " 24" 24 13/16 " TO FACE OF DOORS ELEVATION SECTION VIEW 3D TOE VIEW TALL CABINET OFFSET HEIGHT DOORS APPLIED FINISH END 24 13/16 " 24" CASE DEPTH 84" 95" PLAN VIEW VARIES IN WIDTH UP TO 24" 4 1/2 " 3 1/8 " 24" 24 13/16 " TO FACE OF DOORS ELEVATION SECTION VIEW 3D TOE VIEW 24 PRODUCT SPECIFICATIONS GUIDE Frameless Tall Cabinets Dimensions & Toe-kick
TALL SINGLE EQUAL DOORS TALL SINGLE UNEQUAL DOORS FIXED SHELF FIXED SHELF 95" H MAX 95"H MAX 24" W MAX 24" W MAX TALL STANDARD EQUAL DOORS TALL STANDARD UNEQUAL DOORS FIXED SHELF 95"H MAX FIXED SHELF 95"H MAX 24" W UP TO 36" W MAX 24" W UP TO 36" W MAX PRODUCT SPECIFICATIONS GUIDE Frameless Tall Cabinets Configurations 25
TALL SINGLE OVEN 95"H MAX TALL DOUBLE OVEN 95"H MAX 26 PRODUCT SPECIFICATIONS GUIDE Frameless Tall Cabinets Configurations
FRAMELESS VANITY CABINETS A B F I H K J C L G D E M A 3/4" Doweled top stretchers front and back B Metal box drawer construction (double wall soft closing full extension option available) C 5/8" Full depth adjustable shelf D All doors full overlay design E 5/8" Toe kick material provided at front of leg levelers F Doweled engineered panel and rail joinery G 5/8" Bottom panel H 1/4" Captured backs in bases (except sinks) I 5/8" Drawer bottoms and backs J 3/4" Field applied finished end panel (match to door panel) K 1mm PVC solid color case tape coordinated with finished case selection L Reference door style subsection detail for typical materials provided at back of door M Reference door style subsection detail for typical materials provided at back of applied finished ends PRODUCT SPECIFICATIONS GUIDE Frameless Vanity Cabinets Overview 27
VANITY BASE DIMENSIONS UNFINISHED END 32 1/2 " APPLIED FINISHED END 21 13/16 " 21" CASE DEPTH PLAN VIEW VARIES IN WIDTH ELEVATION TOE KICK DETAIL 32 1/2 " 4 1/2 " 3 1/8 " 21" Finished toe kick material compliments doors and finished ends 28 PRODUCT SPECIFICATIONS GUIDE Frameless Vanity Cabinets Dimensions & Toe-kick
VANITY SINGLE FULL HEIGHT VANITY STANDARD FULL HEIGHT 24" W MAX 24" W UP TO 36" W MAX VANITY SINGLE (1) DRAWER VANITY STANDARD (1) DRAWER 24" W MAX 24" W UP TO 30" W MAX PRODUCT SPECIFICATIONS GUIDE Frameless Vanity Cabinets Configurations 29
VANITY PAIR STANDARD (2) DRAWER VANITY (3) DRAWER STACK 30" W UP TO 36" W MAX 9" W UP TO 30" W MAX SINK VANITY FULL HEIGHT SINK VANITY FALSE FRONT FALSE FRONT 24" W UP TO 36" W MAX 24" W UP TO 36" W MAX 30 PRODUCT SPECIFICATIONS GUIDE Frameless Vanity Cabinets Configurations
FLOATING FULL HEIGHT VANITY FLOATING (2) DRAWER VANITY EQ 21 1/2 " 21 1/2 " EQ 21" 21" FLOATING VANITY MOUNTING REQUIREMENTS FLOATING SINK MOUNTING BRACKET BLOCKING REQUIREMENTS 1/2" 1" 1" 1".250 DIA 3/8" 3/4" 2" X 6" WALL BLOCKING BY OTHERS REQUIRED 2" 10" 1" 1" 2 1/2 " 4" 4".250 DIA 3/8" 1" 1" 1" 5 5/8 " 2 1/2 " 1" 1/2" 5 5/8 " 2" 10" Material is 16GA MS Holes are 5mm unless otherwise stated PRODUCT SPECIFICATIONS GUIDE Frameless Vanity Cabinets Configurations 31
32
FRAMELESS ADA COMPLIANT CABINETS ADA COMPLIANT KITCHEN SINK BASE FULL HEIGHT DOORS C ADA COMPLIANT KITCHEN SINK BASE D B B A A A Adaptable for ADA with removable bottom and toe kick B Open back eliminates need for cut outs C Front fascia positioned behind doors D False front height complies to 27"H clearance requirement 24 30" 30" 27" CLEAR 27" CLEAR 4 1/2 " 4 1/2 " 34 1/2 " 34 1/2 " RDT Cap Screw Floor Line 1" Gap System Screw PRODUCT SPECIFICATIONS GUIDE Frameless ADA Compliant Cabinets Overview & Dimensions 33
STANDARD RDT KITCHEN SINK FULL HEIGHT OPTIONAL RDT KITCHEN SINK FALSE FRONT FALSE FRONT STANDARD RDT VANITY SINK FULL HEIGHT OPTIONAL RDT VANITY SINK FALSE FRONT FALSE FRONT 34 PRODUCT SPECIFICATIONS GUIDE Frameless ADA Compliant Cabinets RDT Configurations
RDT KITCHEN AND VANITY CABINET ASSEMBLY 1) Fully assembled cabinet 2) Remove doors and hinges 3) Remove screws from deck and bracket 4) Remove deck and toes 5) Remove brackets RDT MOUNTING BRACKET 1 1/4 " 1 1/4 " 8/32" THREAD 16 5/16 " PRODUCT SPECIFICATIONS GUIDE Frameless ADA Compliant Cabinets RDT Configurations 35
ADA KITCHEN SHROUD ADA VANITY SHROUD 24" 21" 23 1/4 " 23 1/4 " SHROUD CROSS SECTION MOUNTING REQUIREMENTS REMOVABLE KITCHEN OR VANITY SINK BASE CABINET Removable cabinet is screwed to shroud Remove screws to remove cabinets SHROUD 22" 2" X 6" WALL BLOCKING BY OTHERS REQUIRED OPTIONAL REMOVABLE SINK BASE CABINET 24" D MAX 36 PRODUCT SPECIFICATIONS GUIDE Frameless ADA Compliant Cabinets RDT Configurations
STANDARD FRAMELESS OPERATIONAL HARDWARE Unless otherwise specified, the following comes standard with all frameless configurations. Standard Metal Box Drawer Color/Material: white metal Dimensions: 550mm x 86mm (kitchen) 400mm x 86mm (vanity) Dynamic load capacity: 25kg (55 lbs) 3/4 slide extension Self-closing Up & down / left & right adjustment Deep Metal Box Drawer Color/Material: white metal Dimensions: 550mm x 150mm (kitchen) 400mm x 150mm (vanity) Dynamic load capacity: 25kg (55 lbs) 3/4 slide extension Self-closing Up & down / left & right adjustment Standard Double-Wall Full Extension Metal Drawer Color/Material: white metal Dimensions: 500mm x 84mm (kitchen) 400mm x 84mm (vanity) Dynamic load capacity: 40kg (88 lbs) Concealed full extension Silent system (guarantees smooth running) Full adjustment (up, down, left, right) Deep Double-Wall Full Extension Metal Drawer Color/Material: white metal Dimensions: 500mm x 135mm (kitchen) 400mm x 135mm (vanity) Dynamic load capacity: 40kg (88 lbs) Concealed full extension Silent system (guarantees smooth running) Full adjustment (up, down, left, right) PRODUCT SPECIFICATIONS GUIDE Standard Frameless Operational Hardware 37
Door Hinge Color/Material: Brushed Nickel Degree of opening: 110 6-way book adjustment: Height +/ 2MM Side +/ 2MM Depth + 3MM / 2MM Lift Hinge Color/Material: Brushed Nickel Degree of opening: 100 107 Stay lift system Doors swing up and stay out of way Doors stay open at any degree and close silently Full access to inside of cabinet Foldable Leg Leveler Color/Material: Black Plastic Dimensions: 3 3/4 " min./7" max. high Shipped in retracted position Easy upright positioning Locks in place Shelf Clip Color/Material: Clear Plastic Locking shelf support with 5MM peg for 5/8" or 3/4" shelf Decorative Screw Cap Covers Color/Material: White plastic Dimensions: 1/2" diameter Hides screw heads from view Friction fit pops into place Cabinet Door Bumpers Color/Material: Clear Plastic Dimensions: 1/2" diameter Self adhesive, easy peel-and-stick application Allows for quiet door closing Lessens stress on hinges 38 PRODUCT SPECIFICATIONS GUIDE Standard Frameless Operational Hardware
COMMON FRAMELESS OPTIONAL ACCESSORIES Concealed Bread Board Color/Material: White or black plastic Dimensions: 9" W (min) to 24" W (max) X 21 3/4 " deep Continuous finger pull along front edge Glides on metal rails Retracts flush to case Easy clean Pull-out Trash Assembly Color/Material: Gray Plastic Dimensions: 14 3/8 " W x 19 1/4 "H Double 35 QT containers on full extension guides 100 lbs. weight capacity Contact your sales representative to find out more about other accessories that might be available for your next project. PRODUCT SPECIFICATIONS GUIDE Common Frameless Optional Accessories 39
STANDARD FRAMELESS CABINET SPECIFICATIONS CONSTRUCTION: Glue and dowel engineered panel joinery. FACE STYLE: Flush overlay. Door and drawer faces overlay the cases with minimal margins between faces for operating clearance. EXPOSED ENDS: 3/4" applied panels, finish surface to match door material. Panels to be installed in field. INTERIORS: End panels--5/8" thick composite panel with white lamination on surface. Tops and Bottoms 5/8" thick composite panel with white lamination on surface. Backs 1/4" thick white lamination on MDF substrate. Backs provided in all cabinets (except sink bases)and are captured in the grooves of the side panels. Stretchers 3/4" thick composition panel. Adjustable shelves 5/8" thick composition panel with white lamination, and.5mm PVC edge banding at face edge. All adjustable shelves are full depth and meet KCMA load standards. Locking clips are provided as shelf supports. FACE EDGEBANDING: 1mm PVC solid color case tape coordinated with the finished case material selection. DRAWER SYSTEMS: Metal box drawer construction with 5/8" thick drawer bottoms and backs. Standard drawer system is three quarter extension, self-closing. Upgrade available: to double wall softclose full extension metal drawer system. HINGES: Fully concealed, 6-way adjustable, clip-on application, 110 degree opening, self closing. Upgrade available: to soft-close function. LEG LEVELERS: Base and tall cabinets provided with ABS plastic, folding leg levelers. Levelers are adjustable from 90mm to 190mm in height and support up to 150kg./leg, shipped retracted. TOE KICK: 5/8" matching exposed materials provided at front of leg levelers, 4 ½" height standard. Toe kicks to be cut to length and applied in field. FILLER MATERIALS: 5/8" matching exposed materials provided in standard widths and full material panel lengths. To be trimmed for width and cut to length in the field. QUALITY STANDARD: Lanz frameless cabinetry meets or exceeds certification standards set by the Kitchen Cabinet Manufacturers Association (KCMA) and meets the ANSI/ KCMA A161.1-2000 uniform performance and construction standards for kitchen and vanity cabinets. AVAILABLE UPGRADES: If you would like further clarification about any of our products, processes, or possible upgrades, please contact a Lanz Cabinet Sales Representative. In keeping with our policy of continuous improvement, Lanz Cabinets reserves the right to change specifications in design and materials as conditions require. 40 PRODUCT SPECIFICATIONS GUIDE Standard Frameless Cabinet Specifications
FRAMELESS DOOR & APPLIED END MATERIAL MATRIX Collection Door & applied end face material* Door backer material Applied end backer Grandview Melamine finish Various patterns** Matching melamine Matching melamine Urban lifestyles Textured melamine Various wood patterns** Matching melamine Matching melamine Euroscapes Rigid thermofoil (rtf) Various patterns** White laminate Complimentary solid color selected from 10 choices Atlantic Rigid thermofoil (rtf) Arctic white color** Various routed patterns* White laminate White laminate Cityscapes Selected wood veneers Various species** Matching veneer Matching veneer Ecowood Engineered veneers Various wood patterns** Complimentary wood veneer Complimentary wood veneer Euro Hearthstone 5 piece stick & cope 2" solid wood frame and 1/4" veneer panel Various species** N/A Matching veneer Euro Pacific 5 piece mitered 2 1/8 " solid wood frame and 1/4" veneer panel Various species** N/A Matching veneer Midtown 5 piece stick & cope 3" solid wood frame and 1/4" veneer panel Various species** N/A Matching veneer Manhattan High gloss acrylic Various colors** Complimentary color matte finish Complimentary color matte finish Heritage Rigid thermofoil (rtf) Routed face* Various rtf patterns** White laminate Complimentary solid color selected from 10 choices *Applied finished ends provided as slab construction-- exposed side to match door material. **See door collection brochure. To see our full range of frameless door styles and options, visit: lanzcabinets.com/frameless.cfm/section/doors-frameless PRODUCT SPECIFICATIONS GUIDE Frameless Door & Applied End Material Matrix 41
CABINET CARE INFORMATION CARE OF YOUR CABINETS Immediately following installation Use clean, soft cloths when cleaning your cabinets. Clean all surfaces with a damp cloth, drying immediately with a dry cloth. Failure to dry your cabinet may result in finish damage and possibly damage the underlying wood. Furniture treatment To maintain the beauty of your wood cabinets, simply care for them as you would any fine furniture. Lanz Cabinets uses state of the art AkzoNobel finishes which do not require wax. But, should you decide to wax your cabinets, only use a wax that contains no cleaners. Apply the wax with a clean soft cloth and then buff with a clean dry cloth. Normal cleaning Wipe the cabinet surfaces with a clean, damp cloth and dry with a clean, dry cloth. Mild soap and water may be used to clean oil, grease, or other material from the surfaces. All soap residues should be rinsed from the surfaces using a clean damp cloth. Immediately dry with a clean dry cloth. Failure to dry your cabinet may result in finish damage and possible damage of the underlying wood. Scratches or nicks These may be hidden using a touch-up furniture polish or marker on shallow scratches, or by using a color matching wood tone putty on deeper scratches or nicks. Buffing with a light coat of wax will aid in blending into the surrounding area. Thermofoil doors and laminate surfaces Thermofoil doors and cabinets with laminate surfaces are manufactured using materials that are designed for easy care. Years of service and beauty can be maintained by following these easy care suggestions: Light cleaning Clean all spills immediately using a clean soft cloth dampened with clean water then dry immediately. Heavier cleaning Oils, grease and other soils that do not clean with water may be removed using a solution of mild soap and water. The surface should be rinsed immediately with a clean, damp cloth and dried thoroughly. LOADING YOUR CABINETS Shelving When our cabinets are mounted by a Lanz Cabinet installer or mounted according to our instructions, each square foot of shelf will safely hold up to 25 pounds but not to exceed 450 pounds total weight per cabinet, when applied slowly, over five minutes. Drawers Drawers will safely hold up to 13 ½ pounds per square foot when equally distributed. Hinge/Drawer Guide Maintenance As with any working part, our hinges or drawer guides may become loose over time and therefore should be checked periodically and tightened as necessary. THINGS TO AVOID Excessive Moisture Excessive moisture may have the most detrimental effect on any fine wood finish. Good furniture such as these cabinets cannot withstand constant washing or exposure to water. Avoid hanging dishtowels over doors or placing coffee makers where steam vents directly onto cabinet surfaces. Constant dampness next to dishwashers, sinks, and toe-kick areas can cause finish damage and possibility damage the underlying wood if not dried as it occurs. Immediately dry off any areas where water has spilled. Keep all surfaces dry. Harsh Cleaning Agents Some cleaning agents, such as ammonia, can damage the finish of your cabinets. Avoid exposing your cabinets to these and other potential sources of ammonia-based cleaners, polishes, floor waxes. Do not wipe your cabinets with a dishcloth as it may contain soap, detergent, grease, or other household chemicals that may damage the cabinet finish. Avoid using detergents, strong soaps, or abrasive cleaners and pads, as they may be harmful to the finish. Wax While spray waxes may temporarily increase the sheen of your cabinets, they will certainly leave build-up, which eventually has to be removed and may damage the finish. Do not use any wax on thermofoil doors or laminate surfaces. 42 PRODUCT SPECIFICATIONS GUIDE Cabinet Care Information
LANZ CABINETS WARRANTY POLICY Lanz Cabinet Shop, Inc. (Seller) hereby agrees and warrants that all products manufactured and sold hereunder by Seller are free from defects in material and workmanship for a ONE YEAR warranty period from the date of completion. All claims for defective goods must be submitted to Seller in writing and must specify the defects present in the product. After Seller has had an opportunity to inspect the product, Seller, at his sole discretion, will either replace or repair the product. This warranty is conditioned on the customer s proper treatment of the product after delivery and installation. All implied warranties are limited in duration to one year. Seller s sole responsibility with respect to the products under this warranty, any implied warranty or otherwise is as stated herein and Seller shall not be liable for consequential, indirect, or incidental damages. Some states do not allow limitations on how long implied warranty lasts, or limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. All claims must be mailed to our main office at 3025 West 7th Place., Eugene, OR 97402. For all appointments, please contact our Customer Service Department at 541-485-4050. Hours of operation are Monday through Friday, 7:30am 4:00pm PST.
3025 WEST 7TH PLACE EUGENE, OREGON 97402 PH 541 4485 4050 www.lanzcabinets.com