Meet WIFI READY The World s First Home and Hobby Cutting Machine with a Built-in Scanner The only home and hobby cutting machine that allows you to take an image, photo or hand drawn sketch, scan it and precisely cut the shapes or outlines you want - you can even have the machine draw the scanned images for you. Brother s most affordable electronic cutting machine From the makers of the award-winning ScanNCut, meet DesignNCut, the newest member of Brother s electronic cutter range. Loaded with cutting-edge technology, this ultimate craft machine handles paper, fabric, felt, foam, plastic, vinyl and poster board like a pro. See the ScanNCut in action at youtube.com/brotherau See the DesignNCut in action at youtube.com/brotherau Patterns and Premium Packs NO. 1 QUILT PATTERN COLLECTION (CAUSB1) All designs are created by Japanese quilter, Suzuko Koseki. NO. 2 APPLIQUÉ PATTERN COLLECTION (CAUSB2) All designs are created by Japanese quilter, Akiko Endo. NO. 3 HOME DECO PATTERN COLLECTION (CAUSB3) All designs are created by Japanese designer, Pigpong, Yoko Ganaha. NO. 4 3D PAPER CRAFT PATTERN COLLECTION (CAUSB4) All designs are created by Japanese designer, Pigpong, Yoko Ganaha. Note: All USB Pattern Collections are for machine. Included designs are for personal use only and may not be used for resale. SCANNCUT CANVAS PREMIUM PACK 1 & 2 (CACVPPAC1/CACVPPAC2) Premium Pack 1 contains: 125 patterns plus access to Enhanced Image Tracing. Premium Pack 2 contains: 25 patterns plus activate Enhanced Image Tracing. For or DesignNCut machine.
Mats LOW TACK ADHESIVE MAT 12" X 12" (CAMATLOW) LOW TACK ADHESIVE MAT 12 X 24 (CAMATLOW24) Specially designed for delicate or thin paper (like printer paper or vellum), cutting up to 305mm x 305mm or 305mm x 610mm. ScanNCut or DesignNCut machine. STANDARD MAT 12" X 12" (CAMATSTD12) STANDARD MAT 12 X 24 (CAMATSTD24 ) Specially designed for a wide range of materials, from fabrics to cardstock, cutting up to 305mm x 305mm or 305mm x 610mm. ScanNCut or DesignNCut machine. SCANNING MAT 12 X 12 (CAMATS12) SCANNING MAT 12 X 24 (CAMATS24 ) Specially designed for scanning photos, precious documents and hand drawn designs, scanning up to 305mm x 305mm (12 x 12 ) or 305mm x 610mm (12 x 24 ). Do not use for cutting. For use with Brother ScanNCut machine. Blades and Tools STANDARD CUT BLADE HOLDER (CAHLP1) STANDARD CUT BLADE (CABLDP1) DEEP CUT BLADE HOLDER (CAHLF1) DEEP CUT BLADE (CABLDF1) machine (Standard Cut Blade not included). The Standard Cut Blade can be used to cut a wide range of both fabric and paper! For use with the Brother ScanNCut or DesignNCut machine (Standard Cut Blade Holder not included). machine (Deep Cut Blade not included). Let the Deep Cut Blade do the hard work for you! This specially designed blade was made to cut thick materials like felt, denim and even leather. For use with the Brother ScanNCut or DesignNCut machine (Deep Cut Blade Holder not included).
Blades and Tools COLOUR PEN SET (CAPEN1) ERASABLE PEN SET (CAPEN2) PEN HOLDER (CAPENHL1) UNIVERSAL PEN HOLDER (CAUNIPHL1 ) This set includes six craft colour pens with permanent ink, for drawing and tracing on paper. Pens are not permanent on fabric. For use with the Brother ScanNCut or DesignNCut machine (Pen Holder not included). Always keep cap on when not in use. Perfect for drawing seam allowances or temporary markings on your fabric! Ink in the blue pen can be erased by water and ink in the purple pen is designed to disappear within 2-14 days of application. For or DesignNCut machine. (Pen Holder not included). machine (Pens not included). The Universal Pen Holder allows for more creative freedom when drawing with the ScanNCut and DesignNCut machine. Many pens and writing instruments that you already have will fit perfectly into this new pen holder. Use with pens with a minimum length of 70mm and with a diameter between 9.6mm and 11.4mm. SPATULA AND HOOK SET (CASPHK1 ) The Spatula will help precisely lift cut designs from the cutting mat with ease, given its thin, sleek metal shape. The angled shape of the spatula will help to minimise tearing and curling of the cut material. The Precision Hook Tool (weeder) is perfect for removing tiny cuts from paper, fabric, and other various materials. The hook (weeder) is also great for punching out negative pieces of vinyl and iron-on transfer material from the carrier sheet. Both tools can be used many times. (Note: tip of metal hook is sharp.) BRAYER (CABRY) This brayer with a soft rubber roller is perfect for securing material firmly and evenly to the cutting mat. It is also useful to burnish materials such as adhesive craft vinyl onto smooth surfaces. SCRAPER (CASCP) Use this versatile tool to easily remove the cut-out from your cutting mat or to apply cut designs to smooth surfaces and firmly secure them. A great complement to the Spatula and Hook set. PRECISION TWEEZERS (CATWZ) Reverse action tweezers that open when squeezed and close when released. Comfort grip, durable stainless steel, and precision tip. Ideal for holding and positioning small cut-outs. Note: For detailed instructions on the use, installation and care of these products please refer to your machine s user manual.
Rhinestones RHINESTONE STARTER KIT (CARSKIT1) This kit contains all the materials you need to create one-of-kind personalised rhinestone projects! Kit Includes: an activation card to access 100 rhinestone patterns on ScanNCutCanvas, over 4 types of coloured hot fix rhinestones, backing board, 2 template and transfer sheets, positioning brush and pick-up tool. This kit needs a PC or a tablet, internet access and USB memory device or Wi-Fi if in use with CM350, CM700 or CM900 or DesignNCut, RHINESTONE SHEET SET (CARSSH1) This is a consumable item to create rhinestone projects for or DesignNCut machine and the Rhinestone Starter Kit (both sold separately). Store at normal room temperature, away from direct sunlight, high humidity and heat. Includes: 3 Template Sheets 12 x 12 (305mm x 305mm), 3 Transfer Sheets 12 x 12 (305 mm x 305 mm). RHINESTONE TRANSFER SHEETS (CARSTS1) This is a consumable item to create rhinestone projects for or DesignNCut machine and the Rhinestone Starter Kit (both sold separately). Store at normal room temperature, away from direct sunlight, high humidity and heat. Includes: 7 Transfer Sheets 12 x 12 (305mm x 305mm). RHINESTONE 6SS REFILL PACK, 1.9-2.1MM X 800PCS This is a consumable item to create rhinestone projects for or DesignNCut machine and the Rhinestone Starter Kit (both sold separately). Available in Multi-colour or clear Multi-colour: CARS6M Clear: CARS20C RHINESTONE 10SS REFILL PACK, 2.8 MM - 2.9 MM X 800 PCS machine. Available in Black, Clear, Pink, Red, Turquoise or Yellow Black: CARS10B Clear: CARS10C Pink: CARS10P Red: CARS10R Turquoise: CARS10T Yellow: CARS10Y RHINESTONE 16SS REFILL PACK, 3.8-4.0MM X 400PCS machine. Available in Multicolour or clear Multi-colour: CARS16M Clear: CARS16C RHINESTONE 20SS REFILL PACK, 4.6-4.8MM X 200PCS machine. Available in Multicolour or clear Multi-colour: CARS20M Clear: CARS20C
1 3 5 Images for illustration purposes only. Made in USA 2 4 6 Transfer Paper so much more! 1 3 5 2 4 6 Item # CAVINYLTPG Images for illustration purposes only. Made in USA Fabric Applications and Sheets Great for Appliqué IRON-ON FABRIC APPLIQUÉ CONTACT SHEET 36 X 18.5 1 SHEET (CASTBL1) Iron-on permanent sheet, used to cut fabrics for Appliqué with the Brother ScanNCut or DesignNCut machine. Iron the contact sheet on to your fabric, remove the backing paper and press onto the standard mat, then cut your Appliqué design. Do not use on textured fabrics that cannot be ironed. HIGH TACK ADHESIVE FABRIC SUPPORT SHEET 12 X 12 4 SHEETS (CASTBL2) The high tack support sheet is applied to the standard mat for extra support and to protect the mat when cutting fabric used for piecing and patchwork projects. For use with the Brother machine. STENCIL SHEET 12 X 24 1 SHEET (CASTCL1) Use to create stencils with the Brother ScanNCut machine or DesignNCut machine. Reusable and self-adhesive. Affix cut stencil designs directly to desired projects. For best results, use on smooth surfaces. Great for home décor, paper projects, and fabric art! Rhinestones Vinyl Adhesive Craft Vinyl Adhesive Craft Vinyl This Adhesive Craft Vinyl is removable on most surfaces. Adhere to glass, plastic, metal, walls, and virtually any nonporous surfaces with ease. Use the gridded transfer paper for application (sold separately). Project Idea: For full instructions, visit www.scanncut.com. Transfer Paper Project Idea: Working with Vinyl Life is Beautiful Canvas. For full instructions, visit www.scanncut.com. 1 Roll 12 inches x 6 feet Thickness: 3.0 mil Removable Indoor/Outdoor use Great for creating your own one-of-a kind signs, stencils, glass etchings, car decals, ornaments, home décor and so much more! For more information, visit ScanNCut.com or call 1-800-4-A-BROTHER. 1 Roll 12 inches x 6 feet Thickness: 3.0 mil Printed grid for easy alignment of vinyl cut designs! Clear material for easy placement onto most surfaces! For use with ScanNCut Adhesive Craft Vinyl to create your own one-of-a kind signs, stencils, glass etchings, home décor and For more information, visit ScanNCut.com or call 1-800-4-A-BROTHER. /BrotherScanNCutUSA Distributed by Brother International Corporation 200 Crossing Boulevard, Bridgewater, NJ 08807 /BrotherScanNCutUSA Distributed by Brother International Corporation 200 Crossing Boulevard, Bridgewater, NJ 08807 ADHESIVE CRAFT VINYL ROLLS ScanNCut or DesignNCut machine. 1 roll, 12 inches x 6 feet. Available in white, black, silver, gold, red, blue or plum. White: CAVINYLWT Black: CAVINYLBK Silver: CAVINYLSR Gold: CAVINYLGD Red: CAVINYLRD Blue: CAVINYLBE Plum: CAVINYLPM ADHESIVE CRAFT VINYL 10 SHEETS (CAVINYLMP) ScanNCut or DesignNCut machine. Assorted colours, 12 x 12 inches TRANSFER PAPER (CAVINYLTPG) ScanNCut or DesignNCut machine. Use with the Brother adhesive craft vinyl. 1 roll, 12 inches x 6 feet. Printed grid for easy alignment of vinyl cut designs. Clear material for easy placement onto most surfaces.
Printable Sticker Kit with Lamination PRINTABLE STICKER STARTER KIT (CAPSKIT1) This kit contains all the materials you need to create and personalise your own one-of-akind stickers and labels! The kit includes: an activation card to access 100 template images on ScanNCutCanvas (plus the ability to create your own stickers and labels). Includes: 3 A4 Printable Stickers 8.3 x 11.7 (210mm x 297mm), 3 A4 Laminate Sheets 8.3 x 11.7 (210mm x 297mm), Scraper, Lifter and Instruction Guide. This kit needs a PC or a tablet, internet access and USB memory device or Wi-Fi if in use with CM350, CM700 or CM900 or DesignNCut. For inkjet printers only. PRINTABLE STICKER SHEET SET (CAPSS1) This is a consumable item to create printable sticker projects for use with Brother machine and the Printable Sticker Kit (both sold separately). Includes: 7 A4 Printable Stickers 8.3" x 11.7" (210 mm x 297 mm), 7 A4 Laminate Sheets 8.3" x 11.7" (210 mm x 297 mm). For inkjet printers only. MINI PRINTABLE STICKER SET (CAPSSMINI) Print your favorite images, and then cut and create your own design stickers and labels! Great for crafters, small businesses, and home use. Now in postcard size a great size for printing photos and turning them into stickers! Includes: 7 Printable Stickers 3.9 x 5.8 (100mm x 148mm) and 7 Laminate Sheets x 3.9 x 5.8 (100mm x 148mm). For use with Brother ScanNCut machine or DesignNCut machine and Printable Sticker Starter Kit (sold separately). For inkjet printers only. Stamp Kits STAMP STARTER KIT(CASTPKIT1) This kit contains everything you need to create one-of-a kind clear stamps! Includes: 3 Stamp Sheets: 6 x 8 (150mm x 200mm, acrylic block with grid 3 x 4 (75mm X 100mm), activation card with access to 50 stamp patterns and ability to create your own designs and instruction sheet. This kit needs a PC or a tablet, internet access and USB memory device or Wi-Fi if in use with CM350, CM700 or CM900 or DesignNCut machine. STAMP SHEETS (CASTPS1) This is a consumable item to create stamp projects for or DesignNCut machine and the Stamp Starter Kit (both sold separately). Includes: 3 stamp sheets: 6 x 8 (150mm x 200mm). For best results, use the Standard Mat and Standard Blade. ACRYLIC STAMP BLOCK SET (CASTPBLS1) This Stamp Block Set allows more freedom in the size options of the silicone stamp material you cut. Positioning your design on paper and other surfaces is made easier with this set and you can use silicone stamp material, craft foam and rubber to make one-of-a-kind stamped projects. Includes: 1 acrylic piece with grid: 2 x 3 (50mm x 75mm), 1 acrylic piece with grid: 2 x 6 (50mm x 152mm). For use with Brother machine and Brother Stamp Starter Kit and Stamp Sheets (both sold separately).
Embossing Kits and Tools EMBOSSING STARTER KIT # (CAEBSKIT1) The ScanNCut Embossing Starter Kit provides all of the materials you need to create an embossing effect on paper and metal. Now, there are so many possibilities to create unique projects with both line embossing and region embossing functions. OKit Includes: 1 embossing mat 12 x 9.5, 1 embossing tool holder, 2 embossing tools, 1 silver metal sheet 7.9 x 6.1, 1 brass metal sheet 7.9 x 6.1, 1 template sheet 12 x 12, 1 scanning support sheet 12 x 12 and activation card for access to 50 embossing patterns on ScanNCutCanvas plus instruction guide. EMBOSSING TEMPLATE SHEETS (CAEBSTS1) Use these template sheets with the Region Embossing function to create dimensional embossed designs on paper. Once a template design is created, it can be used many times. Includes: 3 pieces of 12 x12 (305mm x 305mm) template sheets. For use with the Brother ScanNCut and the Embossing Starter Kit (sold separately). EMBOSSING MAT (CAEBSMAT1) Made of special material specifically for embossing. Use with the Line Embossing function to create beautiful dimensional projects. Includes: 12 x 9.5 (305mm x 241mm) mat. This mat holds a variety of papers and metal sheets, just apply the Embossing Mat directly to the Standard Mat or Middle Tack Adhesive Mat of your machine. ScanNCut or DesignNCut and the Embossing Starter Kit (sold separately). EMBOSSING SILVER METAL SHEETS (CAEBSSMS1) Use these silver metal sheets to create unique embossing projects, from greeting cards to home décor items. Includes: 2 pieces of 7.9 x 6.1 (200mm x 155mm) metal sheets. Each metal piece is protected by self-adhesive sheets on the front and back to avoid damage to the scanner glass,embossing tool and silver colour metal. Metal sheet is made of aluminium. For use with either the Brother machine and the Embossing Starter Kit (sold separately). EMBOSSING BRASS METAL SHEETS (CAEBSBMS1) Use these brass coloured copper sheets to create unique embossing projects, from greeting cards to home decor items. Includes: 2 pieces of 7.9 6.1 (200mm x 155mm) brass coloured copper sheets. Each sheet is protected by self-adhesive sheets on the front and back to avoid damage to the scanner glass, embossing tool and brass coloured copper sheet. ScanNCut or DesignNCut machine and the Embossing Starter Kit (sold separately). # Only the line embossing function is available for the DesignNCut machine. Both the line embossing and region embossing functions are available for the ScanNCut machine Contact : Specifications subject to change without notice /brotheraustralia www.brother.com.au