Pout (dbm), PAE(%) Functional Block Diagram Main Features 0.25µm GaN HEMT Technology 8.3 10.3 GHz full performances Frequency Range 60W Output Power @ Pin 40.5 dbm PAE > 33% @ Pin 40.5 dbm Linear Gain > 11 db Bias: VDD = 30V, Idq = 1.5 A - Pulsed Regime Fully matched to 50 Ω Integrated RF to DC decoupling Very compact hybrid assembly: Easy integration either within a module or a power package Product Description Applications is a single stage High Power Amplifier designed by MEC for X-Band applications. It is based on a 0.25 µm GaN on SiC process. The provides more than 60W of output power in the frequency range from 8.3 GHz to 10.3 GHz with a PAE higher than 33% and a Linear Gain higher than 11 db. The is provided as Quasi- MMIC assembly. On the customers' needs can be arranged to ease its integration within a particular module or assembled within a power package. It is fully matched to 50 Ω and provides DC to RF de-couplings. Radar Telecom 52.5 50.0 47.5 45.0 42.5 40.0 37.5 35.0 32.5 30.0 Pout@25 C 27.5 PAE@25 C 25.0 Vdd=30V, Idq= 1.5 A, PW=250µs - duty=20% Pin = 40.5 dbm - 1/6 -
Linear Gain (db) Main Characteristics* Test Conditions: T base_plate = 25 C, Vdd = 30 V, Idq = 1.5 A, Pulse width = 125 µs, Duty Cycle = 10% Parameter Min Typ Max Unit Operating frequency 8.2 10.3 GHz Small Signal Gain 11 13 db Input Return Loss 9 db Output Return Loss 10 db Output Power @ Pin = 40.5 dbm 47.6 48.4 dbm Power Added Efficiency @ Pin = 40.5 dbm 33.0 41.2 % Drain Supply Voltage 30 V Supply Quiescent Drain Current 1.5 A Supply Drain Current @ Pin = 40 dbm 4.1 5.5 A Gate Voltage -2.5 V *Performances described in this document are based on preliminary on-jig characterization. More details are available upon request at contact.mec@mec-mmic.com Vd = 30.0 V - Idq =1.5 A - Pin = 9 dbm - T = 25 C 13.50 13.00 12.50 12.00 11.50 11.00 10.50 10.00 9.50 9.00 Gain 8.50 8.00-2/6 -
Gain (db) Drain Current (A) Pout (dbm) PAE (%) Power Performance Vs. Frequency Vs. Temperature - Pin = 40.5 dbm Vd = 30V, Idq = 1.5A - Pulsed: PW = 125µs - duty cycle = 10% 48.7 48.6 48.5 48.4 48.3 48.2 48.1 48.0 47.9 47.8 47.7 47.6 47.5 47.4 47.3 47.2 47.1 47.0 Pout@-40 C Pout@25 C Pout@70 C 44.0 42.0 40.0 38.0 36.0 34.0 32.0 30.0 PAE@-40 C PAE@25 C PAE@70 C 28.0 8.0 7.9 7.8 7.7 7.6 7.5 7.4 7.3 7.2 7.1 7.0 6.9 6.8 6.7 6.6 6.5 6.4 6.3 Gain@-40 C Gain@25 C Gain@70 C 6.0 5.5 5.0 4.5 4.0 3.5 ID@-40 C ID@25 C ID@70 C 3.0-3/6 -
Gain (db) Drain Current (A) Pout (dbm) PAE (%) Power Performance Vs. Frequency Vs. Temperature - Pin = 40.5 dbm Vd = 30V, Idq = 1.5A - Pulsed: PW = 250µs - duty cycle = 20% 48.2 48.1 48.0 47.9 47.8 47.7 47.6 47.5 47.4 47.3 47.2 47.1 47.0 46.9 46.8 46.7 Pout@-40 C Pout@25 C Pout@70 C 44.0 42.0 40.0 38.0 36.0 34.0 32.0 30.0 28.0 PAE@-40 C PAE@25 C PAE@70 C 26.0 7.7 7.6 7.5 7.4 7.3 7.2 7.1 7.0 6.9 6.8 6.7 6.6 6.5 6.4 6.3 Gain@-40 C Gain@25 C Gain@70 C 6.2 6.0 5.8 5.6 5.4 5.2 5.0 4.8 4.6 4.4 4.2 4.0 3.8 3.6 3.4 3.2 3.0 ID@-40 C ID@25 C ID@70 C - 4/6 -
Hybrid Assembly Outline The drawing shows the dimensions of the hybrid assembly. It can be easily mounted on a more complex power amplifier module or packaged depending upon the particular needs. Contact MEC to discuss the different options available ( contact.mec@mec-mmic.com ) Bias Procedure Bias-Up 1. Vg set to -5 V. 2. Vd set to +30 V. 3. Adjust Vg until quiescent Id is 1.5A (Vg = -2.5 V Typical). 4. Apply RF signal. Bias-Down 1. Turn off RF signal. 2. Reduce Vg to -5 V (Id0 0 ma). 3. Set Vd to 0 V. 4. Set Vg to 0 V. - 5/6 -
Contact Information For additional technical Information and Requirements: Email: contact.mec@mec-mmic.com Tel: +39 0516333403 Notice The furbished information is believed to be reliable. However, performances and specifications contained herein are based on preliminary characterizations and then susceptible to possible variations. On the basis of customer requirements the product can be tested and characterized in specific operating conditions and, if needed, tuned to meet custom specifications. The contents of this document are under the copyright of MEC srl. It is released by MEC srl on condition that it shall not be copied in whole, in part or otherwise reproduced (whether by photographic, reprographic, or any other method) and the contents thereof shall not be divulged to any person other than inside the company at which has been provided by MEC. - 6/6 -